UL Prospector

Succès!

Vous avez enregistré votre recherche avec succès
1,6-Hexanediol Perstorp 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications.
2-Ethylhexanol Perstorp 2-Ethylhexanol is a clear, colorless liquid acrylic monomer. This product provides flexibility, water resistance and exterior durability in decorative and industrial paint applications.
2-Propylheptanol Perstorp 2-Propylheptanol is a branched C10 fatty alcohol used as raw material for lubricants and acrylates in adhesives applications.
Acclaim® 8200 Covestro (formerly Bayer MaterialScience) Acclaim® 8200 polyol is a 8,000-molecular-weight diol based on propylene oxide. This high-performance, low- monol polyether is prepared with Bayer’s proprietary IMPACT® technology, using a patented organo-metallic propoxylation catalyst. It may be use...voir plus Acclaim® 8200 polyol is a 8,000-molecular-weight diol based on propylene oxide. This high-performance, low- monol polyether is prepared with Bayer’s proprietary IMPACT® technology, using a patented organo-metallic propoxylation catalyst. It may be used in polyurethane and other applications, including cast elastomers, sealants, epoxy flexibilizers, defoamers, lubricants, crude oil de-emulsifiers, and plasticizers. As with any product, the use of Acclaim 8200 polyol in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins
Acclaim® Polyol 4200 Covestro (formerly Bayer MaterialScience) Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur in the formulation of solvent-free or low-solvent polyurethanes. It is suitable for combination with many Desmodur® products in the formulation of solvent-free elast...voir plus Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur in the formulation of solvent-free or low-solvent polyurethanes. It is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. Acclaim® Polyol 4200 can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water). voir moins
BEPD Perstorp BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coating...voir plus BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coatings. voir moins
Baybond® PU 130 Covestro (formerly Bayer MaterialScience) Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers u...voir plus Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide. Glass fiber sizes based on Baybond® PU 130 have excellent filmforming properties and adhesion. This product also exhibits very good colorfastness at high temperatures and is also highly resistant to hydrolysis. Full mechanical properties of Baybond® PU 130 are developed by post-crosslinking for 20 minutes @ 170C. As with any product, use of Baybond® PU 130 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins
Baybond® PU 330 Covestro (formerly Bayer MaterialScience) Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. G...voir plus Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. Glass fiber sizes based on Baybond® PU 330 have excellent filmforming properties and adhesion. This product also remains stable when exposed to shear forces. As with any product, use of Baybond® PU 330 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins
Baybond® PU 401 A Covestro (formerly Bayer MaterialScience) Baybond® PU 401 A has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. Commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on its polyurethane dispersion have ex...voir plus Baybond® PU 401 A has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. Commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on its polyurethane dispersion have excellent film-forming properties and very good adhesion. As with any product, use of Baybond® PU 401 A polyurethane dispersion in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins
Baybond® PU 402 A Covestro (formerly Bayer MaterialScience) Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based o...voir plus Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 402 A are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. Baybond® PU 402 A is also very stable against shear forces. As with any product, use of Baybond® PU 402 A in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability voir moins
Baybond® PU 403 Covestro (formerly Bayer MaterialScience) Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond...voir plus Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond PU® 403 have excellent film-forming properties, and very good adhesion. The mechanical properties of Baybond® PU 403 are improved by post-curing at 150ºC or above for 30 minutes. As with any product, Baybond® PU 403 polyurethane dispersion in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins
Baybond® PU 405 Covestro (formerly Bayer MaterialScience) Baybond® PU 405 has anionic/non-ionic cross linking polyether urethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers us...voir plus Baybond® PU 405 has anionic/non-ionic cross linking polyether urethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide. Glass fiber sizes based on Baybond® PU 405 have excellent filmforming properties, adhesion and colorfastness. This product is also highly resistant to the effects of shear forces and hydrolysis. Full mechanical properties of Baybond® PU 405 are developed by post-crosslinking for 20 minutes @ 170°C. As with any product, use of Baybond® PU 405 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins
Baybond® PU 406 Covestro (formerly Bayer MaterialScience) Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing. It is also useful for the sizing of glass fibers used to reinforce thermop...voir plus Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing. It is also useful for the sizing of glass fibers used to reinforce thermoplastics and has excellent film-forming properties and adhesion. Baybond® PU 406 also remains stable when exposed to shear forces. As with any product, use of Baybond® PU 406 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins
Baybond® XL 825 Covestro (formerly Bayer MaterialScience) Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 5...voir plus Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. voir moins
Baybond® XP 2728 Covestro (formerly Bayer MaterialScience) Baybond® XP 2728 is a anionic/non-ionic polycarbonate-polyether urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber...voir plus Baybond® XP 2728 is a anionic/non-ionic polycarbonate-polyether urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XP 2728 are characterized by their outstanding film-forming properties and very good adhesion. Baybond® XP 2728 exhibits outstanding hydrolysis resistance and colorfastness, and is also very stable against shear forces. As with any product, use of Baybond® XP 2728 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins
Bayhydrol® A 242 Covestro (formerly Bayer MaterialScience) Bayhydrol® A 242 is a polyacrylic resin used as a coreactant for Bayhydur® and Desmodur® N polyisocyanates in the formulation of aqueous two component polyurethane systems for various applications by brush, roller or spray.
Bayhydrol® HD 2016 Covestro (formerly Bayer MaterialScience) Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with othe...voir plus Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with other water-reducible binders. voir moins
Bayhydrol® HD 2017 Covestro (formerly Bayer MaterialScience) Bayhydrol® HD 2017 is a hydroxyl-functional acrylic resin dispersed in water with approximately 1% co-solvent. It can be used as a coreactant for Bayhydur® water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings.
Bayhydrol® PR 435 Covestro (formerly Bayer MaterialScience) Bayhydrol® PR 435 is an aqueous aliphatic polyurethane dispersion that contains only 5% by weight of organic cosolvent.
Bayhydrol® UV 2280 Covestro (formerly Bayer MaterialScience) Bayhydrol® UV 2280 is a urethane acrylate dispersion. It is supplied as approximately 39% solids dispersion in water. It may be used in the formulation of aqueous UV-curing coatings, especially for applica- tion on wood/wood materials. Generally speaking,...voir plus Bayhydrol® UV 2280 is a urethane acrylate dispersion. It is supplied as approximately 39% solids dispersion in water. It may be used in the formulation of aqueous UV-curing coatings, especially for applica- tion on wood/wood materials. Generally speaking, the coated surfaces can be sanded before UV curing. Additions of 1.0 to 2.5% by weight photoinitiator, calculated on the solid binder, have proved suitable for initiating the curing reaction. voir moins
Bayhydur® 304 Covestro (formerly Bayer MaterialScience) Bayhydur® 304 is a hydrophilically modified, aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is primarily used as the crosslinker for aqueous polyol binders (Bayhydrol).
Bayhydur® 305 Covestro (formerly Bayer MaterialScience) Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by shaking or manual stirring is ...voir plus Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by shaking or manual stirring is a key requirement. voir moins
Bayhydur® 401-70 Covestro (formerly Bayer MaterialScience) Bayhydur® 401-70 is a water-dispersible polyisocyanate based on Isophorone Diisocyanate (IPDI) and dissolved in 1-methoxypropylacetate-2/xylene, 1:1. It is mainly used as the co-reactant for aqueous polyol binders from the Bayhydrol range.
Bayhydur® BL XP 2706 Covestro (formerly Bayer MaterialScience) Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water...voir plus Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast, one-component polyurethane baking coatings. It is also used as an additive in waterborne baking systems to improve hardness, impact strength, chemical resistance and adhesion. voir moins
Bayhydur® XP 2487/1 Covestro (formerly Bayer MaterialScience) Bayhydur® XP 2487/1 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings.
Bayhydur® XP 2547 Covestro (formerly Bayer MaterialScience) Bayhydur® XP 2547 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. Suitable coreactants are hydroxyl-functional waterborne resins s...voir plus Bayhydur® XP 2547 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. Suitable coreactants are hydroxyl-functional waterborne resins such as Bayhydrol® XP 2542. voir moins
Bayhydur® XP 2655 Covestro (formerly Bayer MaterialScience) Bayhydur® XP 2655 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is used as a hardener for waterborne two-component polyurethane systems and a crosslinking agent for waterborne systems from which reliable incorpora...voir plus Bayhydur® XP 2655 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is used as a hardener for waterborne two-component polyurethane systems and a crosslinking agent for waterborne systems from which reliable incorporation and high chemical resistances are required. voir moins
Bayhydur® XP 2700 Covestro (formerly Bayer MaterialScience) Bayhydur® XP 2700 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Form supplied is approximately 65% in dipropylene glycol dimethyl ether. It is a crosslinker for aqueous coatings, developed specially for trade applica...voir plus Bayhydur® XP 2700 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Form supplied is approximately 65% in dipropylene glycol dimethyl ether. It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by manual stirring is a key requirement. voir moins
Bayhytherm® 3146 Covestro (formerly Bayer MaterialScience) Bayhytherm® 3146 is a water-reducible, aliphatic, self-crosslinking stoving urethane resin used as binder for waterborne, one-component stoving polyurethane systems.
Baymedix® AP501 Covestro (formerly Bayer MaterialScience) Baymedix® AP501 is an aliphatic NCO-terminated prepolymer based on hexamethylene diisocyanate.
Baymedix® AR602 Covestro (formerly Bayer MaterialScience) Baymedix® AR602 is a polyether polyol based on a tetra-functional starter molecule.
Baymedix® CD102 Covestro (formerly Bayer MaterialScience) Baymedix® CD102 is an aqueous polyurethane dispersion.
Baymedix® CD104 Covestro (formerly Bayer MaterialScience) Baymedix® CD104 is an aqueous polyurethane dispersion.
Baymedix® FD103 Covestro (formerly Bayer MaterialScience) Baymedix® FD103 is an aqueous polyurethane dispersion.
Baymedix® FP503 Covestro (formerly Bayer MaterialScience) Baymedix® FP503 is an aliphatic, hydrophilic NCO prepolymer blend based on hexamethylene diisocyanate (HDI).
Capa™ 2043 Perstorp Capa™ 2043 is a standard grade low molecular weight, linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 400 and a typical OH value of 280 mg KOH/g. It is a clear, colorless liquid, ...voir plus Capa™ 2043 is a standard grade low molecular weight, linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 400 and a typical OH value of 280 mg KOH/g. It is a clear, colorless liquid, that can be processed at ordinary temperatures. Capa™ 2043 can be used in polyurethane adhesive, surface coating and flexible foam applications and as a resin intermediate. voir moins
Capa™ 2054 Perstorp Capa™ 2054 is a standard grade low molecular weight, linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 550 and a typical hydroxyl value of 204 mg KOH/g. It is a liquid at normal am...voir plus Capa™ 2054 is a standard grade low molecular weight, linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 550 and a typical hydroxyl value of 204 mg KOH/g. It is a liquid at normal ambient temperatures. Capa™ 2054 can be used in polyurethane adhesive, surface coating and flexible foam applications and as a resin intermediate. voir moins
Capa™ 2054J Perstorp Capa™ 2054J is a linear polyester diol in the form of a clear liquid or white paste. It has a molecular weight of 550 and a typical hydroxyl value of 204 mg KOH/g. Capa™ 2054J can be used in polyurethane adhesive and surface coating applications.
Capa™ 2100A Perstorp Capa™ 2100A is a premium grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 1000 and a typical OH value of 112 mg KOH/g. The product was developed as an intermediate for the p...voir plus Capa™ 2100A is a premium grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 1000 and a typical OH value of 112 mg KOH/g. The product was developed as an intermediate for the production of high grade polyurethane elastomers. In addition, Capa™ 2100A can be used in polyurethane adhesive, surface coating applications, and as a resin intermediate. voir moins
Capa™ 2101A Perstorp Capa™ 2101A is a standard grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 1000 and a typical OH value of 112 mg KOH/g. The product has been specially developed as an interm...voir plus Capa™ 2101A is a standard grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 1000 and a typical OH value of 112 mg KOH/g. The product has been specially developed as an intermediate for the production of high grade polyurethane elastomers. In addition, Capa™ 2101A can be used in polyurethane adhesive, surface coating applications, and as a resin intermediate. voir moins
Capa™ 2125 Perstorp Capa™ 2125 is a standard grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 1250 and a typical OH value of 90 mg KOH/g. The product has been specially developed as an intermed...voir plus Capa™ 2125 is a standard grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 1250 and a typical OH value of 90 mg KOH/g. The product has been specially developed as an intermediate for the production of high quality polyurethane elastomers, where high resistance to hydrolysis is required. It is also recommended for the production of high quality polyurethane coatings. voir moins
Capa™ 2141A Perstorp Capa™ 2141A is a premium grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. This product yields a low viscosity prepolymer followed by a high quality polyurethane with good mechanical properties and wear ...voir plus Capa™ 2141A is a premium grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. This product yields a low viscosity prepolymer followed by a high quality polyurethane with good mechanical properties and wear resistance. Capa™ 2141A is used in adhesive,sealant, coating, and paint applications. voir moins
Capa™ 2161A Perstorp Capa™ 2161A is a premium grade linear polyester diol derived from caprolactone, terminated by primary hydroxyl groups. It has a molecular weight of 1600 and a typical OH value of 70 mg KOH/g. It is a white waxy solid TPU with good flexibility, mechanical,...voir plus Capa™ 2161A is a premium grade linear polyester diol derived from caprolactone, terminated by primary hydroxyl groups. It has a molecular weight of 1600 and a typical OH value of 70 mg KOH/g. It is a white waxy solid TPU with good flexibility, mechanical, and wear resistance properties. Capa™ 2161A is used in adhesive,sealant, coating, and paint applications. voir moins
Capa™ 2201A Perstorp Capa™ 2201A is a premium grade linear polycaprolactone diol. It has a molecular weight 2000 and a typical OH value of 56 mg KOH/g. The product has been developed as a high performance alternative to Capa™ 2201. When used to produce cast or thermoplastic e...voir plus Capa™ 2201A is a premium grade linear polycaprolactone diol. It has a molecular weight 2000 and a typical OH value of 56 mg KOH/g. The product has been developed as a high performance alternative to Capa™ 2201. When used to produce cast or thermoplastic elastomers it offers improved properties over elastomers made from standard Capa™ materials of better prepolymer stability and improved hydrolysis resistance. Capa™ 2201 can be used in automotive industry, footwear industry, and in adhesive and binding applications. voir moins
Capa™ 2205 Perstorp Capa™ 2205 is a standard grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 2000 and a typical OH value of 56 mg KOH/g. The product has been specially developed as an intermed...voir plus Capa™ 2205 is a standard grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 2000 and a typical OH value of 56 mg KOH/g. The product has been specially developed as an intermediate for the production of polyurethane elastomers. In addition, Capa™ 2205 can be used in polyurethane adhesives and surface coatings. voir moins
Capa™ 2302A Perstorp Capa™ 2302A is a premium grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 3000 and a typical OH value of 37 mg KOH/g. It is a white waxy solid. This product offers better hy...voir plus Capa™ 2302A is a premium grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 3000 and a typical OH value of 37 mg KOH/g. It is a white waxy solid. This product offers better hydrolysis resistance and lower odourthan Capa™ 2302 ans is recommended for the production of high quality polyurethane coatings and rapid crystallising adhesives. voir moins
Capa™ 2402 Perstorp Capa™ 2402 is a standard grade linear polyester diol in the form of a white waxy solid. It has been specially developed as an intermediate for the production of polyurethane adhesives. Capa™ 2402 is recommended for applications where short open times and ...voir plus Capa™ 2402 is a standard grade linear polyester diol in the form of a white waxy solid. It has been specially developed as an intermediate for the production of polyurethane adhesives. Capa™ 2402 is recommended for applications where short open times and outstanding green strength is required. voir moins
Capa™ 3031 Perstorp Capa™ 3031 is a low molecular weight trifunctional caprolactone polyol, in which all of the hydroxyl groups are primary. It has a molecular weight of 300 and a typical OH value of 560 mg KOH/g. It is clear, viscous liquid liquid at room temperature and ca...voir plus Capa™ 3031 is a low molecular weight trifunctional caprolactone polyol, in which all of the hydroxyl groups are primary. It has a molecular weight of 300 and a typical OH value of 560 mg KOH/g. It is clear, viscous liquid liquid at room temperature and can be used in surface coatings and as a chain extender in polyurethane elastomers. voir moins
Capa™ 3050 Perstorp Capa™ 3050 is a low molecular weight polyester triol. It has a molecular weight of 540 and a typical OH value of 310 mg KOH/g. It is liquid at 20°C and can be processes at ordinary temperatures. Capa™ 3050 can be used in the production of polyurethane sur...voir plus Capa™ 3050 is a low molecular weight polyester triol. It has a molecular weight of 540 and a typical OH value of 310 mg KOH/g. It is liquid at 20°C and can be processes at ordinary temperatures. Capa™ 3050 can be used in the production of polyurethane surface coatings, particularly for clear, light-stable applications and for coatings require flexible and tough surface characteristics. It is also used in adhesive applications voir moins
Capa™ 3091 Perstorp Capa™ 3091 is a polyester triol terminated by primary hydroxyl groups. It has a molecular weight of 900 and a typical OH value of 183 mg KOH/g. It is a colorless liquid, and can be processed at ordinary temperatures. Capa™ 3091 can be used as a dispersion...voir plus Capa™ 3091 is a polyester triol terminated by primary hydroxyl groups. It has a molecular weight of 900 and a typical OH value of 183 mg KOH/g. It is a colorless liquid, and can be processed at ordinary temperatures. Capa™ 3091 can be used as a dispersion medium for liquid colors' in surface coatings and in rigid polyurethane castings, particularly for clear, light-stable materials. voir moins
Capa™ 4101 Perstorp Capa™ 4101 is a tetra-functional polyol terminated with primary hydroxyl groups. It has a molecular weight of 1000 and a typical OH value of 218 mg KOH/g. Capa™ 4101 is a clear liquid developed for production of high solids coatings where both flexibility...voir plus Capa™ 4101 is a tetra-functional polyol terminated with primary hydroxyl groups. It has a molecular weight of 1000 and a typical OH value of 218 mg KOH/g. Capa™ 4101 is a clear liquid developed for production of high solids coatings where both flexibility and highcross-linking density are required. voir moins
Capa™ 7203 Perstorp Capa™ 7203 is a low melting block co-polymer diol terminated by primary hydroxyl groups. It has a molecular weight of 2000 and a typical OH value of 56 mg KOH/g. It is a soft wax specifically designed for the production of TPUs having hydrolytic stability...voir plus Capa™ 7203 is a low melting block co-polymer diol terminated by primary hydroxyl groups. It has a molecular weight of 2000 and a typical OH value of 56 mg KOH/g. It is a soft wax specifically designed for the production of TPUs having hydrolytic stability with low melting point and low viscosity. This product can also be used in adhesives and polyurethanes. voir moins
Capa™ 80210D Perstorp Capa™ 80210D is a develpoment grade linear co-polyester diol in the form of a clear, viscous liquid at normal ambient temperatures. It is made from partly renewable sources and can be used in adhesive and coatings applications.
Capa™ 8025D Perstorp Capa™ 8025D is a grade 2000Mw, linear co-polyester diol. It is a clear, colorless viscous liquid. The co-polyester is made from partly renewable sources. Capa™ 8025D provides advantages in handling, storage and processing due to its liquid form. It is use...voir plus Capa™ 8025D is a grade 2000Mw, linear co-polyester diol. It is a clear, colorless viscous liquid. The co-polyester is made from partly renewable sources. Capa™ 8025D provides advantages in handling, storage and processing due to its liquid form. It is used in PU cast elastomer, adhesives, and coating applications. voir moins
Charmor™ PM15 Perstorp Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for pl...voir plus Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM15 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. voir moins
Charmor™ PM40 Perstorp Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...voir plus Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 98%. voir moins
Charmor™ PM40 Care Perstorp Charmor™ PM40 Care offers a rich carbon source for intumescent coatings and plastics. Charmor™ PM40 Care is a micronized pentaerythritol derivative from the Voxtar™ platform and is partly based on renewable raw material. It has the same quality and techni...voir plus Charmor™ PM40 Care offers a rich carbon source for intumescent coatings and plastics. Charmor™ PM40 Care is a micronized pentaerythritol derivative from the Voxtar™ platform and is partly based on renewable raw material. It has the same quality and technical properties as the standard Charmor™ PM40. voir moins
Charmor™ PT40 Perstorp Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...voir plus Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 87%. voir moins
Desmodur® BL 1100/1 Covestro (formerly Bayer MaterialScience) Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI, supplied as solvent-free. It is combined with cycloaliphatic diamines to formulate highly flexible, one-component stoving coatings, including those for application by dipping and curta...voir plus Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI, supplied as solvent-free. It is combined with cycloaliphatic diamines to formulate highly flexible, one-component stoving coatings, including those for application by dipping and curtain coating and adhesive cements. voir moins
Desmodur® BL 3272 MPA Covestro (formerly Bayer MaterialScience) Desmodur® BL 3272 MPA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It was developed as a hardener for lightfast one-pack baking polyurethane coatings w...voir plus Desmodur® BL 3272 MPA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It was developed as a hardener for lightfast one-pack baking polyurethane coatings whose baking temperature can be reduced by the addition of a catalyst, e.g. 0.3 - 1.0 % DBTL, without influencing the storage stability of the ready-to-use formulation. voir moins
Desmodur® BL 3370 MPA Covestro (formerly Bayer MaterialScience) Desmodur® BL 3370 PMA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It is used with hydroxyl functional coreactants in the formulation of light-stable o...voir plus Desmodur® BL 3370 PMA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It is used with hydroxyl functional coreactants in the formulation of light-stable one-component baking systems with relatively low curing temperatures. Coatings based on Desmodur® BL 3370 MPA are used for the industrial finishing of appliances, coil coating, can coating, and in the automotive industry for chip-resistant primer-surfacers and topcoats. voir moins
Desmodur® BL 3475 BA/SN Covestro (formerly Bayer MaterialScience) Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack bakin...voir plus Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack baking polyurethane coatings with a low baking temperature. Used in the formulation of high-quality industrial coatings, especially for cans and tubes. The product can also be used as an additive to improve the reactivity, flexibility and adhesion of conventional baking systems. voir moins
Desmodur® BL 4265 SN Covestro (formerly Bayer MaterialScience) Desmodur® BL 4265 SN is a blocked aliphatic polyisocyanate based on isophorone diisocyanate (IPDI) and dissolved in aromatic 100. It is used with hydroxyl-functional coreactants in the formulation of light-stable one-component baking systems with relative...voir plus Desmodur® BL 4265 SN is a blocked aliphatic polyisocyanate based on isophorone diisocyanate (IPDI) and dissolved in aromatic 100. It is used with hydroxyl-functional coreactants in the formulation of light-stable one-component baking systems with relatively low curing temperatures. Coatings based on Desmodur® BL 4265 SN blocked polyisocyanate are used for the industrial finishing of appliances, coil coating, and can coating, and in the automotive industry for chip-resistant primer-surfacers and topcoats. voir moins
Desmodur® BL 5375 Covestro (formerly Bayer MaterialScience) Desmodur® BL 5375 is a blocked aliphatic crosslinking stoving urethane resin based on HMDI and dissolved in solvent naptha 100/1-methoxypropylacetate-2, 1:1. It was developed as a hardener component for lightfast one-pack stoving polyurethane systems. As ...voir plus Desmodur® BL 5375 is a blocked aliphatic crosslinking stoving urethane resin based on HMDI and dissolved in solvent naptha 100/1-methoxypropylacetate-2, 1:1. It was developed as a hardener component for lightfast one-pack stoving polyurethane systems. As with air-drying two-pack PU coatings, the film properties can be influenced by the crosslinking density and the selection of hydroxylbearing polyol co-reactant. voir moins
Desmodur® E 1160 MPA/X Covestro (formerly Bayer MaterialScience) Desmodur® E 1160 MPA/X is an aromatic prepolymer based on toluene diisocyanate (TDI). It is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for m...voir plus Desmodur® E 1160 MPA/X is an aromatic prepolymer based on toluene diisocyanate (TDI). It is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for mineral building material. Clear impregnating systems based on Desmodur® E 1160 MPA/X provide surfaces with long-term protection against moisture, oil, fuels, aggressive chemicals and chemical damage. voir moins
Desmodur® E 14 Covestro (formerly Bayer MaterialScience) Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant fin...voir plus Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant finishes and sprayable coatings. Desmodur E 14 can be used with amine crosslinkers to provide tough flexible films. voir moins
Desmodur® E 21 Covestro (formerly Bayer MaterialScience) Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). It is a solvent-free liquid of medium viscosity. It is suitable for use in the formulation of moisture-curing, one-component systems which, when thinned w...voir plus Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). It is a solvent-free liquid of medium viscosity. It is suitable for use in the formulation of moisture-curing, one-component systems which, when thinned with a suitable solvent, can be used as primers and sealers for porous substrates to provide protection against moisture, oil, fuel and other chemicals. It can also be used as a binder in the formulation of synthetic resin mortars. voir moins
Desmodur® H Covestro (formerly Bayer MaterialScience) Desmodur® H is a monomeric aliphatic diisocyanate. It is used mainly in the manufacture of polyisocyanates, for example, polyurethane coating raw materials.
Desmodur® HL BA Covestro (formerly Bayer MaterialScience) Desmodur® HL BA is an aliphatic/aromatic polyisocyanate copolymer based on toluene diisocyanate (TDI) and and hexamethylene diisocyanate (HDI) and dissolved in n-butyl acetate. Used in the formulation of fast-drying two-component coatings. Drying times of...voir plus Desmodur® HL BA is an aliphatic/aromatic polyisocyanate copolymer based on toluene diisocyanate (TDI) and and hexamethylene diisocyanate (HDI) and dissolved in n-butyl acetate. Used in the formulation of fast-drying two-component coatings. Drying times of coatings using Desmodur® HL BA are considerably shorter than those of coatings based on Desmodur® CB polyisocyanates and somewhat longer than those based on Desmodur® IL polyisocyanate. voir moins
Desmodur® I Covestro (formerly Bayer MaterialScience) Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and po...voir plus Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and polymers. The isocyanate groups present in Desmodur® I diisocyanate can undergo addition reactions at room temperature with compounds which contain active hydrogens, making it a valuable organic intermediate. The difference in reactivity between the isocyanate groups in Desmodur® I diisocyanate is especially useful in the preparation of polyurethane products. voir moins
Desmodur® IL 1351 51% BA Covestro (formerly Bayer MaterialScience) Desmodur® IL 1351 51% BA is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 51% in butyl acetate. Can be used in combination with Desmophen® 1300 for the formulation of very fast drying, two-component polyurethane ...voir plus Desmodur® IL 1351 51% BA is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 51% in butyl acetate. Can be used in combination with Desmophen® 1300 for the formulation of very fast drying, two-component polyurethane coatings. Such systems are used in the furniture industry, among others, where very short drying times and early sandability are required. voir moins
Desmodur® IL 1451 Covestro (formerly Bayer MaterialScience) Desmodur® IL 1451 is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Two-pack polyurethane coatings based on Desmodur® IL 1451 are characterized by their rapid initial drying and early sandability. This is ...voir plus Desmodur® IL 1451 is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Two-pack polyurethane coatings based on Desmodur® IL 1451 are characterized by their rapid initial drying and early sandability. This is most important in industrial wood and furniture finishing. voir moins
Desmodur® IL BA Covestro (formerly Bayer MaterialScience) Desmodur® IL BA is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates. Coati...voir plus Desmodur® IL BA is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates. Coatings based on Desmodur® IL BA lend themselves to applications requiring high production rates and fast dry-to-handle times. Wood coatings formulated with Desmodur® IL BA show quick sanding properties. The applied finishes show little tendency to run from sharp edges. voir moins
Desmodur® IL EA Covestro (formerly Bayer MaterialScience) Desmodur® IL EA is an aromatic polyisocyanate resin based on toluene diisocyanate (TDI). Form supplied is approximately 51 % in ethyl acetate. Can be used as a hardener component for fast-drying, two-component polyurethane coatings. It can also be used i...voir plus Desmodur® IL EA is an aromatic polyisocyanate resin based on toluene diisocyanate (TDI). Form supplied is approximately 51 % in ethyl acetate. Can be used as a hardener component for fast-drying, two-component polyurethane coatings. It can also be used in combination with various Baycoll® products or other hydroxyl-bearing substances to formulate adhesives. Because of its fast drying, Desmodur IL EA is mainly used in coatings for on-line applications, like the packaging industry or in industrial furniture finishing. voir moins
Desmodur® L 67 BA Covestro (formerly Bayer MaterialScience) Desmodur® L 67 BA is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in butyl acetate. Can be used in combination with various Desmophen® grades or other hydroxyl-bearing substances to formulate air-drying two-c...voir plus Desmodur® L 67 BA is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in butyl acetate. Can be used in combination with various Desmophen® grades or other hydroxyl-bearing substances to formulate air-drying two-component polyurethane coatings. Systems crosslinked with Desmodur® L 67 BA can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. voir moins
Desmodur® L 67 MPA/X Covestro (formerly Bayer MaterialScience) Desmodur® L 67 MPA/X is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in 1-methoxypropylacetate-2/xylene (1:1). Can be used in combination with various Desmophen® grades or other hydroxylbearing substances to ...voir plus Desmodur® L 67 MPA/X is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in 1-methoxypropylacetate-2/xylene (1:1). Can be used in combination with various Desmophen® grades or other hydroxylbearing substances to formulate air-drying twocomponent polyurethane coatings. Systems crosslinked with Desmodur® L 67 MPA/X can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. voir moins
Desmodur® L 75 Covestro (formerly Bayer MaterialScience) Desmodur® L 75 is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Can be used in combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formul...voir plus Desmodur® L 75 is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Can be used in combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formulate air-drying two-component polyurethane coatings and adhesives. Systems crosslinked with Desmodur L 75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. It is also suitable for room-temperature crosslinking of adhesives based on Desmocoll® or Baycoll®. These can be used to bond many materials,e.g. wood, metal and plastic. voir moins
Desmodur® N 100 Covestro (formerly Bayer MaterialScience) Desmodur® N 100 is a solvent-free, aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Recommended for use in two-component clear and pigmented interior and exterior finishes. Coatings based on Desmodur N 100, exhibit excellent gloss...voir plus Desmodur® N 100 is a solvent-free, aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Recommended for use in two-component clear and pigmented interior and exterior finishes. Coatings based on Desmodur N 100, exhibit excellent gloss retention and weather resistance when formulated with proper hydroxyl-functional coreactants. These coatings also have very good resistance to solvents, chemicals, and abrasion. voir moins
Desmodur® N 100A Covestro (formerly Bayer MaterialScience) Desmodur® N 100A is a solvent-free, aliphatic polyisocyanate (HDI biuret).
Desmodur® N 3200 Covestro (formerly Bayer MaterialScience) Desmodur® N 3200 is a solvent free aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Coatings formulated with Desmodur® N 3200 polyisocyanate show the same final properties as those based on Desmodur® N 100. It is particularly suit...voir plus Desmodur® N 3200 is a solvent free aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Coatings formulated with Desmodur® N 3200 polyisocyanate show the same final properties as those based on Desmodur® N 100. It is particularly suitable for the formulation of high-solids two-component coating materials for a variety of applications. voir moins
Desmodur® N 3200A Covestro (formerly Bayer MaterialScience) Desmodur® N 3200A is a solvent free aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI).
Desmodur® N 3400 Covestro (formerly Bayer MaterialScience) Desmodur® N 3400 is a solvent free low viscosity aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Can be used as a hardener or reactive diluent for 100% solids, solvent-borne and aqueous, two-pack polyurethane coatings. Depending ...voir plus Desmodur® N 3400 is a solvent free low viscosity aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Can be used as a hardener or reactive diluent for 100% solids, solvent-borne and aqueous, two-pack polyurethane coatings. Depending on the polyol used, the coatings yield tough but flexible films that can be either soft or extremely hard, have good resistance to chemicals and solvents, good weather stability and good resistance to abrasion. voir moins
Desmodur® N 3600 Covestro (formerly Bayer MaterialScience) Desmodur® N 3600 is a low viscosity solvent-free polyfunctional aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Used primarily as the hardener component for light- fast two-pack polyurethane coatings with high resistance to chemi...voir plus Desmodur® N 3600 is a low viscosity solvent-free polyfunctional aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Used primarily as the hardener component for light- fast two-pack polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. The main applications for systems based on Desmodur® N 3600 are air and force drying coatings for automotive OEM, automotive refinishing, transportation, industrial finishing and plastics. voir moins
Desmodur® N 3790 BA Covestro (formerly Bayer MaterialScience) Desmodur® N 3790 BA is an aliphatic polyisocyanate (high functional HDI trimer) supplied at 90% solids in n-butyl acetate. Used primarily as the hardener component for lightfast two-pack polyurethane coatings with high resistance to chemicals and weatheri...voir plus Desmodur® N 3790 BA is an aliphatic polyisocyanate (high functional HDI trimer) supplied at 90% solids in n-butyl acetate. Used primarily as the hardener component for lightfast two-pack polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. The main applications for systems based on Desmodur® N 3790 BA are air and force-drying coatings for automotive OEM, automotive refinishing, transportation, industrial finishing and plastics. voir moins
Desmodur® N 3800 Covestro (formerly Bayer MaterialScience) Desmodur® N 3800 is a solvent free flexibilizing aliphatic polyisocyanate. In combination with suitable polyols, it can be used in the formulation of highly flexible coatings that are stable to accelerated and outdoor weathering. These can be used for coa...voir plus Desmodur® N 3800 is a solvent free flexibilizing aliphatic polyisocyanate. In combination with suitable polyols, it can be used in the formulation of highly flexible coatings that are stable to accelerated and outdoor weathering. These can be used for coating plastics. The use of Desmodur® N 3800 as a combination hardener component makes it possible to adjust the flexibility of the polyol mill base. The product can also be used as a flexibilizing component in other applications, e.g. stone-chip protection systems, vehicle repair systems. voir moins
Desmodur® N 75 MPA/X Covestro (formerly Bayer MaterialScience) Desmodur® N 75 MPA/X is an aliphatic polyisocyanate that acts as the hardener component for lightfast polyurethane coating systems.
Desmodur® W Covestro (formerly Bayer MaterialScience) Desmodur® W is a liquid cycloaliphatic diisocyanate used as a reactive building block for the preparation of chemical products, reactive intermediates and polymers.
Desmodur® Z 4470 BA Covestro (formerly Bayer MaterialScience) Desmodur® Z 4470 BA is an aliphatic polyisocyanate for use as the hardener component for lightfast polyurethane coating systems and as an additive resin for alkyd spray coatings.
Desmodur® Z 4470 MPA/X Covestro (formerly Bayer MaterialScience) Desmodur® Z 4470 MPA/X is an aliphatic polyisocyanate for use as the hardener component for lightfast polyurethane coating systems and as an additive resin for alkyd spray coatings.
Desmodur® Z 4470 SN Covestro (formerly Bayer MaterialScience) Desmodur® Z 4470 SN is an aliphatic polyisocyanate based on isophorone diisocyanate and dissolved in aromatic 100. Has better solubility and compatibility. Mainly used as an additive resin to accelerate drying, curing and chemical crosslinking.
Desmodur® Z 4470 SN/BA Covestro (formerly Bayer MaterialScience) Desmodur® Z 4470 SN/BA is an aliphatic polyisocyanate based on isophorone diisocyanate dissolved in Aromatic 100 and n-butyl acetate. Better solubility and compatibility. Mainly used as an additive resin to accelerate drying, curing and chemical crossl...voir plus Desmodur® Z 4470 SN/BA is an aliphatic polyisocyanate based on isophorone diisocyanate dissolved in Aromatic 100 and n-butyl acetate. Better solubility and compatibility. Mainly used as an additive resin to accelerate drying, curing and chemical crosslinking. voir moins
Desmophen® 1300 BA Covestro (formerly Bayer MaterialScience) Desmophen® 1300 BA is a polyester polyol. Form supplied is approximately 75% in butyl acetate. This polyester is mainly used as the co-reactant for polyisocyanates in the formulation of fast-drying, two-pack coatings. They are mainly used for clear and p...voir plus Desmophen® 1300 BA is a polyester polyol. Form supplied is approximately 75% in butyl acetate. This polyester is mainly used as the co-reactant for polyisocyanates in the formulation of fast-drying, two-pack coatings. They are mainly used for clear and pigmented finishes for wood, chipboard and hardboard. voir moins
Desmophen® 1300 X Covestro (formerly Bayer MaterialScience) Desmophen® 1300 X polyester is mainly used as the co-reactant for polyisocyanates in the formulation of fast-drying, two-pack coatings. They are mainly used as clear and pigmented finishes for wood, chipboard and hardboard. Desmophen 1300 X is a polyester...voir plus Desmophen® 1300 X polyester is mainly used as the co-reactant for polyisocyanates in the formulation of fast-drying, two-pack coatings. They are mainly used as clear and pigmented finishes for wood, chipboard and hardboard. Desmophen 1300 X is a polyester polyol, and the form supplied is approximately 75% in xylene. voir moins
Desmophen® 631 MPA Covestro (formerly Bayer MaterialScience) Desmophen® 631 MPA is a saturated polyester resin.
Desmophen® 650 MPA Covestro (formerly Bayer MaterialScience) Desmophen® 650 MPA is a branched, hydroxyl-bearing polyester used as a co-reactant, usually with Desmodur N 75, in the formulation of lightfast and weather-stable, two-pack polyurethane coatings.
Desmophen® 650A 65 PMA Covestro (formerly Bayer MaterialScience) Desmophen® 650A 65 PMA is a saturated polyester resin that is used as a coreactant for Desmodur N polyisocyanates two-component polyurethane coatings.
Desmophen® 651 MPA Covestro (formerly Bayer MaterialScience) Desmophen® 651 MPA is a branched hydroxyl-bearing polyester used as a co-reactant, usually with Desmodur N 75, in the formulation of lightfast and weather-stable two-pack coatings.
Desmophen® 670 BA Covestro (formerly Bayer MaterialScience) Desmophen® 670 BA is a slightly branched, hydroxyl- bearing polyester. Form supplied is approximately 80% in butyl acetate. Desmophen® 670 BA is used primarily in the formulation of weather-stable flexible coatings.
Desmophen® C 1100 Covestro (formerly Bayer MaterialScience) Desmophen® C 1100 is a linear aliphatic polycarbonate polyester based on hexane diol-1,6 E-caprolactone with an average molecular weight of approximately 1,000. It is a solvent-free medium viscosity liquid used for high-grade building blocks for a variet...voir plus Desmophen® C 1100 is a linear aliphatic polycarbonate polyester based on hexane diol-1,6 E-caprolactone with an average molecular weight of approximately 1,000. It is a solvent-free medium viscosity liquid used for high-grade building blocks for a variety of polyurethane systems. Applications for Desmophen® C 1100 include both interior and exterior applications with very good weatherability, lightfastness, hydrolytic stability and elasticity. voir moins
Desmophen® C 1200 Covestro (formerly Bayer MaterialScience) Desmophen® C 1200 is a linear aliphatic polycarbonate polyester based on hexane diol-1,6 E-caprolactone with an average molecular weight of approximately 2,000. It is a solvent-free medium viscosity liquid used for binder for high-grade flexible coatings...voir plus Desmophen® C 1200 is a linear aliphatic polycarbonate polyester based on hexane diol-1,6 E-caprolactone with an average molecular weight of approximately 2,000. It is a solvent-free medium viscosity liquid used for binder for high-grade flexible coatings and sealers. Possible applications include decorative coatings, sealing compounds and joint sealants. voir moins