| CRYSTAZENE 110 | DRT (Les Derives Resiniques et Terpeniques) | CRYSTAZENE 110 is a water-white, highly stabilized, terpene-modified tackifying resin. It shows excellent adhesive performances. This product is recommended for metallocene polyethylene based hot melt-synthetic rubber adhesives, acrylic based adhesives, a...voir plus CRYSTAZENE 110 is a water-white, highly stabilized, terpene-modified tackifying resin. It shows excellent adhesive performances. This product is recommended for metallocene polyethylene based hot melt-synthetic rubber adhesives, acrylic based adhesives, and for plastic film modification. voir moins | |
| DERCOLYTE A 115 | DRT (Les Derives Resiniques et Terpeniques) | A tackifying resin especially recommended to improve the adhesive properties of hot melt formulations or solvent adhesives. It is produced from the polymerization of alpha pinene. | |
| DERCOLYTE A 125 | DRT (Les Derives Resiniques et Terpeniques) | DERCOLYTE A 125 is a tackifying resin recommended to improve the adhesive properties of hot melt formulations or solvent adhesives. It is produced from the polymerization of alpha pinene. | |
| DERCOLYTE LTG | DRT (Les Derives Resiniques et Terpeniques) | Issue de la polymérisation des terpènes, la DERCOLYTE LTG est une résine tackifiante de bas point de ramollissement, à faible taux de COV, recommandée pour plastifier et améliorer l’adhésion de certaines formules d’adhésifs sensibles à la pression. | |
| DERCOLYTE S 115 | DRT (Les Derives Resiniques et Terpeniques) | A tackifying resin recommended to improve the adhesive properties of solvent based adhesive formulations, particularly in PSA. It is produced from the polymerization of beta pinene. | |
| DERCOLYTE S 125 | DRT (Les Derives Resiniques et Terpeniques) | DERCOLYTE S 125 is a tackifying resin recommended to improve the adhesive properties of solvent based adhesive formulations, particularly in PSA. It is produced from the polymerization of beta pinene. | |
| DERCOLYTE TS 105 | DRT (Les Derives Resiniques et Terpeniques) | DERCOLYTE TS 105 is a very light colored tackifying resin showing excellent adhesive performances with block copolymers, especially in hot melt, pressure sensitive adhesives formulations. It is produced from the copolymerisation of terpene and styrene. | |
| DERCOLYTE TS 95 | DRT (Les Derives Resiniques et Terpeniques) | DERCOLYTE TS 95 is produced from the polymerisation of terpene and styrene. It is a light coloured tackifying resin showing excellent adhesive performances with block copolymers. | |
| DERMULSENE 222 | DRT (Les Derives Resiniques et Terpeniques) | An aqueous, solvent free resin based on terpene and stabilized rosin ester. It is designed to tackify a wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
| DERMULSENE DEG | DRT (Les Derives Resiniques et Terpeniques) | It is an aqueous, solvent free resin based on diethyleneglycol resin. | |
| DERMULSENE HBR 509 | DRT (Les Derives Resiniques et Terpeniques) | Le DERMULSENE HBR 509 est une dispersion sans solvant à base de colophane et de résine pétrolière. | |
| DERMULSENE HBR 70 | DRT (Les Derives Resiniques et Terpeniques) | An aqueous, solvent free resin based on a hybrid rosin/hydrocarbon resin. It is designed specifically to tackify and wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
| DERMULSENE RA 702 | DRT (Les Derives Resiniques et Terpeniques) | DERMULSENE RA 702 is an aqueous, solvent free resin based on stabilized rosin. It is recommended for contact adhesives, building and industrial adhesives. | |
| DERMULSENE RE 802 | DRT (Les Derives Resiniques et Terpeniques) | An aqueous, solvent free resin based on a stabilized rosin ester. It is designed specifically to tackify a wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
| DERMULSENE TR 602 | DRT (Les Derives Resiniques et Terpeniques) | An aqueous resin dispersion based on a terpene phenolic resin. It is specifically designed to tackify a wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
| DERTOLINE G2L | DRT (Les Derives Resiniques et Terpeniques) | A tall oil resin esterified with glycerol. It is a tackifying resin particularly recommended for hot melt adhesives based on EVA or block copolymers. | |
| DERTOLINE P2L | DRT (Les Derives Resiniques et Terpeniques) | A tall oil resin esterified with pentaerythritol. It is a tackifying resin mainly recommended for hot melt adhesives based on EVA copolymers. | |
| DERTOLINE PLS | DRT (Les Derives Resiniques et Terpeniques) | A highly stabilized tall oil rosin esterified with pentaerythritol. It is a tackifying resin mainly suitable for hot melt adhesives based on EVA or block copolymers. | |
| DERTOPHENE H 150 | DRT (Les Derives Resiniques et Terpeniques) | DERTOPHENE H 150 is a terpene phenolic resin showing a high polarity. It is suitable for use in solvent based and hot melt based adhesives. | |
| DERTOPHENE T | DRT (Les Derives Resiniques et Terpeniques) | A terpene phenolic resin compatible with various elastomers, resins and waxes. It is used to improve the properties of hot melt or solvent based adhesives. | |
| DERTOPHENE T 105 | DRT (Les Derives Resiniques et Terpeniques) | A terpene phenolic resin compatible with various elastomers, resins and waxes. It improves the properties of hot melt or solvent adhesives. | |
| DERTOPHENE T 115 | DRT (Les Derives Resiniques et Terpeniques) | A terpene phenolic resin compatible with various elastomers. It is suitable for use in solvent based and hot melt based adhesives. | |
| FIPOLDER™ FHP05040 | Polygroup Inc. | FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...voir plus FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. voir moins | |
| FIPOLDER™ FHP05080 | Polygroup Inc. | FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...voir plus FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. voir moins | |
| FIPOLDER™ HM300 | Polygroup Inc. | FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some applicatio...voir plus FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. FIPOLDER™ powders are well suited for a variety of applications including for use in structural paints and coatings, textiles, soap and cleaners, Etc.. voir moins | |
| GRANOLITE G | DRT (Les Derives Resiniques et Terpeniques) | This is a light-colored and deodorised gum rosin esterified with glycerol. | |
| GRANOLITE G 105 | DRT (Les Derives Resiniques et Terpeniques) | Gum rosin esterified with glycerol, GRANOLITE G 105 is a light-colored and deodorised resin suitable in various adhesive applications. | |
| GRANOLITE P | DRT (Les Derives Resiniques et Terpeniques) | It is a light-colored and deodorised resin suitable in various adhesive and road marking Hot Melt formulations. | |
| GRANOLITE P 118 | DRT (Les Derives Resiniques et Terpeniques) | It is a pentaerythritol ester of rosin, showing a high softening point, mainly recommanded for Hot Melt formulations. | |
| GRANOLITE SG | DRT (Les Derives Resiniques et Terpeniques) | It is a glycerol ester of stabilized rosin, deodorized. | |
| GRANOLITE TEG | DRT (Les Derives Resiniques et Terpeniques) | A modified triethyleneglycol ester of rosin. It is used in adhesives, mainly for floor covering formulations. | |
| HP series™ HM080 | Polygroup Inc. | HP series™ HM080 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements fo...voir plus HP series™ HM080 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements for coating modern textile interlinings and is well suited for paste coatings. voir moins | |
| HP series™ HM200 | Polygroup Inc. | HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements fo...voir plus HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements for coating modern textile interlinings and is well suited for paste coatings. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| NOVACOM-P™ HFS2100P | Polygroup Inc. | NOVACOM-P™ HFS2100P is a maleic anhydride (MAH) grafted high density polyethylene (HPDE) polymer in a powder form. These polar materials have been specifically designed to provide adhesion to inorganic fillers or additives, wood and paper fiber, glass, EV...voir plus NOVACOM-P™ HFS2100P is a maleic anhydride (MAH) grafted high density polyethylene (HPDE) polymer in a powder form. These polar materials have been specifically designed to provide adhesion to inorganic fillers or additives, wood and paper fiber, glass, EVOH, Nylon and other materials. Primarily markets for these materials are plastics compounding and mixed plastic recycle industries as compatibilizer. voir moins | |
| PROPOLDER™ MPP2010 | Polygroup Inc. | PROPOLDER™ MPP2010 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2010 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| PROPOLDER™ MPP2020 | Polygroup Inc. | PROPOLDER™ MPP2020 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2020 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| PROPOLDER™ MPP2040 | Polygroup Inc. | PROPOLDER™ MPP2040 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2040 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| PROPOLDER™ MPP2060 | Polygroup Inc. | PROPOLDER™ MPP2060 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2060 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| PROPOLDER™ MPP2080 | Polygroup Inc. | PROPOLDER™ MPP2080 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2080 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| PROPOLDER™ MPP2100 | Polygroup Inc. | PROPOLDER™ MPP2100 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2100 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| SP Series™ SHP1500-1 | Polygroup Inc. | SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...voir plus SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. voir moins | |
| SP Series™ SHP4080-1 | Polygroup Inc. | SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...voir plus SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. voir moins | |
| SP Series™ SHP8015-1 | Polygroup Inc. | SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...voir plus SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. voir moins | |
| Viplex 200 | Atmos Technologies | Viplex 200 is a general purpose extender or secondary plasticizer with a moderate viscosity used in flexible PVC, polyurethane elastomers, rubber, and epoxies. Applications include concrete crack repair and more. | |
| Viplex 222 | Atmos Technologies | Viplex 222 is a general purpose PU extender with moderate viscosity. Applications include Carpet rebond adhesive. | |
| Viplex 222HV | Atmos Technologies | Viplex 222HV is a general-purpose high viscosity extender with excellent compatibility with Polyurethane systems. High loading capability. Applications include Carpet rebond adhesive. | |
| Viplex 223.5 | Atmos Technologies | Viplex 223.5 is a general purpose extender for higher-loading polyurethane systems and PVC plastisols. | |
| Viplex 525-24 | Atmos Technologies | Viplex 525-24 is a general purpose extender with good water resistance required in Polyurethane and Epoxy systems. Applications include Coatings, PVC Plastisol, and Sealants. | |
| Viplex 530A | Atmos Technologies | Viplex 530A is a general-purpose PU extender with moderate viscosity. Applications include Tire Fill, Waterproofing, and Roofing sealant. | |
| Viplex LS | Atmos Technologies | Viplex LS is a low-viscosity diluent with excellent compatibility in Polyurethane and Epoxy systems. Applications include Coatings, PVC Plastisols, and Carbon Black. | |
| Vycel EF | Atmos Technologies | Vycel EF is a viscosity-reducing diluent with very low color and a low odor level for Polyurethane and Epoxy systems. Vycel EF is very hydrophobic and is completely compatible with Epoxy, Phenolics, MDI, TDI and their Prepolymers. Applications include Coa...voir plus Vycel EF is a viscosity-reducing diluent with very low color and a low odor level for Polyurethane and Epoxy systems. Vycel EF is very hydrophobic and is completely compatible with Epoxy, Phenolics, MDI, TDI and their Prepolymers. Applications include Coatings, Adhesives, Sealants, Pigments, PU Foam. voir moins | |
| Vycel U | Atmos Technologies | Vycel U is a low-viscosity diluent of PU systems with excellent particle wetting. Excellent compatibility with Polyurethanes, Epoxy, Polyester, and Phenolic resin systems. Applications include Coatings, Adhesives, Sealants, Electrical potting, PU Foam. | |
| Vycel U-3000 | Atmos Technologies | Vycel U-3000 is a low-viscosity diluent, low-odor, and water-white extender. Applications include Coatings, Adhesives, Sealants, and concrete crack repair. | |
| Vycel U-V | Atmos Technologies | Vycel U-V is a low viscosity diluent of PU systems with excellent particle wetting. Excellent compatibility with Polyurethanes, Epoxy, Polyester and Phenolic resin systems. Vanilla odorant added to mitigate petroleum smell. Applications include Coatings, ...voir plus Vycel U-V is a low viscosity diluent of PU systems with excellent particle wetting. Excellent compatibility with Polyurethanes, Epoxy, Polyester and Phenolic resin systems. Vanilla odorant added to mitigate petroleum smell. Applications include Coatings, Adhesives, Sealants, Electrical potting, PU Foam. voir moins |
