| 1-Vinylimidazole, VIM | BASF SE, Intermediates Division | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...voir plus 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. voir moins | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF SE, Intermediates Division | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 1,3-Diaminopropane | BASF SE, Intermediates Division | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| 1,3-Dioxolane | BASF SE, Intermediates Division | 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. Dioxolane can be used in pressure sensitive adhesives and sealants, as well as for dissolving polar polymers, including polyesters, epoxi...voir plus 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. Dioxolane can be used in pressure sensitive adhesives and sealants, as well as for dissolving polar polymers, including polyesters, epoxies, urethanes, and polyacrylamide. It can also be used as a solvent in polyester film seaming. voir moins | |
| 1,4-Butanediol, BDO | BASF SE, Intermediates Division | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...voir plus 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. voir moins | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...voir plus 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. voir moins | |
| 1,5-Pentanediol, PDO | BASF SE, Intermediates Division | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...voir plus 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. voir moins | |
| 1,6-Hexanediol HDO® | BASF SE, Intermediates Division | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...voir plus 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. voir moins | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF SE, Intermediates Division | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...voir plus 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. voir moins | |
| 2-(2-Aminoethoxy) ethanol | BASF SE, Intermediates Division | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | |
| 2-Ethyl-4-Methylimidazole | BASF SE, Intermediates Division | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF SE, Intermediates Division | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...voir plus 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. voir moins | |
| 2-Ethylhexylvinylether, EHVE | BASF SE, Intermediates Division | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...voir plus 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. voir moins | |
| 2-Ethylimidazole | BASF SE, Intermediates Division | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Mercaptoethanol | BASF SE, Intermediates Division | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| 2-Methylimidazole | BASF SE, Intermediates Division | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF SE, Intermediates Division | 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks. | |
| 3-(Cyclohexylamino) propylamine | BASF SE, Intermediates Division | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...voir plus 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. voir moins | |
| 3-(Dimethylamino) propylamine | BASF SE, Intermediates Division | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF SE, Intermediates Division | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...voir plus 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. voir moins | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF SE, Intermediates Division | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...voir plus 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. voir moins | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF SE, Intermediates Division | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...voir plus 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. voir moins | |
| 4,4'-Methylenedianiline, MDA | BASF SE, Intermediates Division | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...voir plus 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. voir moins | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF SE, Intermediates Division | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...voir plus 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. voir moins | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF SE, Intermediates Division | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...voir plus 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. voir moins | |
| Baxxodur™ EC 201 | BASF SE, Intermediates Division | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...voir plus Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. voir moins | |
| Baxxodur™ EC 301 | BASF SE, Intermediates Division | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| Baxxodur™ EC 302 | BASF SE, Intermediates Division | Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener. | |
| Baxxodur™ EC 110 | BASF SE, Intermediates Division | Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide. | |
| Baxxodur™ EC 130 | BASF SE, Intermediates Division | Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination. | |
| Baxxodur™ EC 252 | BASF SE, Intermediates Division | Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg. | |
| Benzylamine | BASF SE, Intermediates Division | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| Capromer™ PD1–10 | BASF SE, Intermediates Division | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...voir plus Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD1–10 A | BASF SE, Intermediates Division | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...voir plus Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD1–20 | BASF SE, Intermediates Division | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...voir plus Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate voir moins | |
| Capromer™ PD1–20 A | BASF SE, Intermediates Division | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...voir plus Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF SE, Intermediates Division | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...voir plus Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. voir moins | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF SE, Intermediates Division | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...voir plus Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates voir moins | |
| Chlorez® 700 | Dover Chemical Corporation | Chlorez® 700 is a white powder solid that is 70% chlorinated paraffin and is well suited for use with alkyd resins. It is primarily used as a flame retardant for production of various products such as paints, coatings, rubber, adhesives, polyolefins, text...voir plus Chlorez® 700 is a white powder solid that is 70% chlorinated paraffin and is well suited for use with alkyd resins. It is primarily used as a flame retardant for production of various products such as paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. Additionally, it can improve ancillary in various grades of rubber and shows excellent synergies with antimony trioxide. voir moins | |
| Chlorez® 700-S | Dover Chemical Corporation | Chlorez® 700-S is a solid white powder of 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins, t...voir plus Chlorez® 700-S is a solid white powder of 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. And it shows excellent synergies with antimony trioxide and improvements with ancillary in various grades of rubber. voir moins | |
| Chloroflo 42 | Dover Chemical Corporation | Chloroflo 42 is a clear liquid made of a chlorinated long chain paraffin that contains a stabilizer to maintain product integrity during transport and storage. It is a nonflammable, non-corrosive, low volatile liquid at room temperature. Primarily used i...voir plus Chloroflo 42 is a clear liquid made of a chlorinated long chain paraffin that contains a stabilizer to maintain product integrity during transport and storage. It is a nonflammable, non-corrosive, low volatile liquid at room temperature. Primarily used in metal working applications as a straight or soluble oil for machining, drawing and stamping processes. Chloroflo 42 can be used in a variety of other applications including use as a flame retardant and plasticizer for paints and plastic production. voir moins | |
| Chlorowax® 40 | Dover Chemical Corporation | Chlorowax® 40 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax® 40 can be used in plasticizers an...voir plus Chlorowax® 40 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax® 40 can be used in plasticizers and EP metalworking packages. Chlorowax 40 is typically (but not limited to) applied in straight oil machining, drawing and stamping fluids. voir moins | |
| Chlorowax® 50 | Dover Chemical Corporation | Chlorowax® 50 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax 50 is typically (but not limited t...voir plus Chlorowax® 50 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax 50 is typically (but not limited to) applied in straight oil machining, drawing and stamping fluids. voir moins | |
| Cyclohexyl vinyl ether, CHVE | BASF SE, Intermediates Division | Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...voir plus Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. voir moins | |
| DA-8506 | Dover Chemical Corporation | DA-8506 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additi...voir plus DA-8506 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additional wetting and lubricity properties are desired in metal working applications. They can also be used as substitutes for chlorinated paraffins in lower temperature plasticizing applications. voir moins | |
| DA-8506XS | Dover Chemical Corporation | DA-8506XS is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when addi...voir plus DA-8506XS is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additional wetting and lubricity properties are desired in metal working applications. They can also be used as substitutes for chlorinated paraffins in lower temperature plasticizing applications. voir moins | |
| DA-8527 | Dover Chemical Corporation | DA-8527 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additi...voir plus DA-8527 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additional wetting and lubricity properties are desired in metal working applications. They can also be used as substitutes for chlorinated paraffins in lower temperature plasticizing applications. voir moins | |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | BASF SE, Intermediates Division | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...voir plus Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). voir moins | |
| Diethanolamine, pure | BASF SE, Intermediates Division | Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings. | |
| Diethylene triamine | BASF SE, Intermediates Division | Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...voir plus Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). voir moins | |
| Diethyleneglycol divinyl ether, DVE-2 | BASF SE, Intermediates Division | Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based ...voir plus Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . voir moins | |
| Diisopropanolamine | BASF SE, Intermediates Division | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...voir plus Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. voir moins | |
| DO-8110 | Dover Chemical Corporation | DO-8110 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applicatio...voir plus DO-8110 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. DO-8110 can also be used as a plasticizer or as an additive in EP metalworking packages. voir moins | |
| Dovermulse H-0700 | Dover Chemical Corporation | Dovermulse H-0700 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~750 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-0700...voir plus Dovermulse H-0700 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~750 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-0700 is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1000 | Dover Chemical Corporation | Dovermulse H-1000 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1000...voir plus Dovermulse H-1000 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1000 is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1010-P | Dover Chemical Corporation | Dovermulse H-1010-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1010-P is primaril...voir plus Dovermulse H-1010-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1010-P is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1020-P | Dover Chemical Corporation | Dovermulse H-1020-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1020-P is primaril...voir plus Dovermulse H-1020-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1020-P is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1035-N | Dover Chemical Corporation | Dovermulse H-1035-N is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1035-N is primaril...voir plus Dovermulse H-1035-N is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1035-N is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovernox® 10 | Dover Chemical Corporation | Dovernox® 10 is a white free flowing powder, made of Tetrakis methylene (3,5-di-t-butyl-4-hydroxyhydrocinnamate) methane. It is a solid high molecular weight hindered phenolic antioxidant that can be used in a wide range of polymers. Dovernox 10 is well s...voir plus Dovernox® 10 is a white free flowing powder, made of Tetrakis methylene (3,5-di-t-butyl-4-hydroxyhydrocinnamate) methane. It is a solid high molecular weight hindered phenolic antioxidant that can be used in a wide range of polymers. Dovernox 10 is well suited for use as an effective stabilizer for polyolefins, styrenics, block copolymers, elastomers, adhesives, PVC, and polyurethanes. voir moins | |
| Dovernox® 76 | Dover Chemical Corporation | Dovernox® 76 is a white crystline powder of Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnamate. It is a solid high molecular weight hindered phenolic antioxidant that is effective in a wide range of polymers. Dovernox 76 can be used as an effective stabili...voir plus Dovernox® 76 is a white crystline powder of Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnamate. It is a solid high molecular weight hindered phenolic antioxidant that is effective in a wide range of polymers. Dovernox 76 can be used as an effective stabilizer for polyolefins, styrenics, block copolymers, elastomers, adhesives, PVC and polyurethanes. voir moins | |
| Dovernox® D-311 | Dover Chemical Corporation | Dovernox® D-311 is an antioxidant blend in powder form, and is offered by Dover Chemical Corporation, to be used in various polymer formulations. It is a two-component blend of Doverphos® S-480 and Dovernox® 10. | |
| Dovernox® D-321 | Dover Chemical Corporation | Dovernox® D-321 is an antioxidant blend in powder form, and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-480 and Dovernox® 10. | |
| Dovernox® D-911 | Dover Chemical Corporation | Dovernox® D-911 is a blend of Doverphos® S-9228 and Dovernox® 10 in a 1/1 weight/weight ratio. Chemically, Doverphos® S-9228 is Bis(2,4-dicumylphenyl) pentaerythritol diphosphite and Dovernox® 10 is Tetrakis methylene (3,5-di-t-butyl-4-hydroxyhydro-cinnam...voir plus Dovernox® D-911 is a blend of Doverphos® S-9228 and Dovernox® 10 in a 1/1 weight/weight ratio. Chemically, Doverphos® S-9228 is Bis(2,4-dicumylphenyl) pentaerythritol diphosphite and Dovernox® 10 is Tetrakis methylene (3,5-di-t-butyl-4-hydroxyhydro-cinnamate) methane. voir moins | |
| Dovernox® D-921 | Dover Chemical Corporation | Dovernox® D-921 is an antioxidant blend which has an advantage of low-dusting during handling and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-9228 and Dovernox® 10. | |
| Dovernox® D-9411-T | Dover Chemical Corporation | Dovernox® D-9411T is a one to one blend of Doverphos® S-9228T and Doverphos® S-480. It is offered by Dover Chemical Corporation to be used in various polymer formulations as an excellent cost/performance processing stabilizer. | |
| Dovernox®D-721 | Dover Chemical Corporation | Dovernox® D-721 is a white to off white powdered antioxidant blend and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-9228 and Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnama...voir plus Dovernox® D-721 is a white to off white powdered antioxidant blend and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-9228 and Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnamate. voir moins | |
| Doverphos® 10 HR (TPP) | Dover Chemical Corporation | Doverphos® 10 HR (TPP) is a clear liquid made of triphenyl phosphite (TPP). Primarily used as an aryl phosphite stabilizer, Doverphos® 10 HR (TPP) is well suited for the production of adhesives, polyurethanes, coatings, styrenics, polyesters, epoxies, PVC...voir plus Doverphos® 10 HR (TPP) is a clear liquid made of triphenyl phosphite (TPP). Primarily used as an aryl phosphite stabilizer, Doverphos® 10 HR (TPP) is well suited for the production of adhesives, polyurethanes, coatings, styrenics, polyesters, epoxies, PVC, and polycarbonates. voir moins | |
| Doverphos® 10 (TPP) | Dover Chemical Corporation | Doverphos® 10 (TPP) is a clear liquid made of triphenyl phosphite (TPP). Primarily used as an aryl phosphite stabilizer, it can be used in polyolefins to enhance the effect of polymerization catalyst. Doverphos® 10 (TPP) is well suited for the production...voir plus Doverphos® 10 (TPP) is a clear liquid made of triphenyl phosphite (TPP). Primarily used as an aryl phosphite stabilizer, it can be used in polyolefins to enhance the effect of polymerization catalyst. Doverphos® 10 (TPP) is well suited for the production of adhesives, polyurethanes, coatings, styrenics, polyesters, epoxies, PVC and polycarbonates. voir moins | |
| Doverphos® 11 | Dover Chemical Corporation | Doverphos® 11 is a clear liquid made of tetraphenyl dipropyleneglycol diphosphite, which has a high phosphorus content and a high molecular weight but low viscosity. Primarily used as a heat stabilizer, Doverphos® 11 is well suited for the production of r...voir plus Doverphos® 11 is a clear liquid made of tetraphenyl dipropyleneglycol diphosphite, which has a high phosphorus content and a high molecular weight but low viscosity. Primarily used as a heat stabilizer, Doverphos® 11 is well suited for the production of rigid and plasticized PVC applications where high gloss is important. voir moins | |
| Doverphos® 12 | Dover Chemical Corporation | Doverphos® 12 is a clear liquid made from poly (dipropyleneglycol) phenyl phosphite, which has a high phosphorus content and high molecular weight. Primarily used as a heat stabilizer, Doverphos® 12 is well suited for use in the production of rigid and p...voir plus Doverphos® 12 is a clear liquid made from poly (dipropyleneglycol) phenyl phosphite, which has a high phosphorus content and high molecular weight. Primarily used as a heat stabilizer, Doverphos® 12 is well suited for use in the production of rigid and plasticized PVC applications where early color hold and brighter, more consistent color is important. voir moins | |
| Doverphos® 213 (DPP) | Dover Chemical Corporation | Doverphos® 213 (DPP) is a clear liquid made of diphenyl phosphite which is a liquid diaryl phosphite with a relatively low molecular weight and a high phosphorus content. Primarily used as a secondary stabilizer in PVC, Doverphos® 213 (DPP) can also be e...voir plus Doverphos® 213 (DPP) is a clear liquid made of diphenyl phosphite which is a liquid diaryl phosphite with a relatively low molecular weight and a high phosphorus content. Primarily used as a secondary stabilizer in PVC, Doverphos® 213 (DPP) can also be effective in improving the color of unsaturated polyesters and minimize plateout during processing. voir moins | |
| Doverphos® 253 | Dover Chemical Corporation | Doverphos® 253 is a clear liquid made of dioleyl hydrogen phosphite with a relatively high molecular weight and low phosphorus content. Primarily used as a flame retardant additive, it can be used as a costabilizer with mixed metal stabilizers used in PVC...voir plus Doverphos® 253 is a clear liquid made of dioleyl hydrogen phosphite with a relatively high molecular weight and low phosphorus content. Primarily used as a flame retardant additive, it can be used as a costabilizer with mixed metal stabilizers used in PVC applications. In addition Doverphos® 253 can be used in lube applications as an additive for metalworking fluids. voir moins | |
| Doverphos® 4 (TNPP) | Dover Chemical Corporation | Doverphos® 4 (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP). It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer for a wide variety of applications, Doverphos® 4 (TNPP) is w...voir plus Doverphos® 4 (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP). It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer for a wide variety of applications, Doverphos® 4 (TNPP) is well suited for use in the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® 4-HR Plus (TNPP) | Dover Chemical Corporation | Doverphos® 4-HR Plus (TNPP) is a clear liquid mad of trisnonylphenyl phosphite (TNPP) with approximately 1.00% triisopropanolamine. It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer Doverpho...voir plus Doverphos® 4-HR Plus (TNPP) is a clear liquid mad of trisnonylphenyl phosphite (TNPP) with approximately 1.00% triisopropanolamine. It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer Doverphos® 4-HR Plus (TNPP) is well suited for the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® 4-HR (TNPP) | Dover Chemical Corporation | Doverphos® 4-HR (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) with pproximately 0.75% triisopropanolamine. Primarily used as a heat stabilizer, Doverphos® 4-HR (TNPP) is well suited for the production of polyolefin, acrylics, adhesives...voir plus Doverphos® 4-HR (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) with pproximately 0.75% triisopropanolamine. Primarily used as a heat stabilizer, Doverphos® 4-HR (TNPP) is well suited for the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® 49 (TTDP) | Dover Chemical Corporation | Doverphos® 49 (TTDP) is a clear liquid made of Tris (Tridecyl) Phosphite which is a high molecular weight and low phosphorus content alkyl phosphate. Primarily used as a heat stabilizer, Doverphos® 49 (TTDP) has good hydrolytic stability and low volatilit...voir plus Doverphos® 49 (TTDP) is a clear liquid made of Tris (Tridecyl) Phosphite which is a high molecular weight and low phosphorus content alkyl phosphate. Primarily used as a heat stabilizer, Doverphos® 49 (TTDP) has good hydrolytic stability and low volatility when mixed with additional metal heat stabilizers for production of PVC products. voir moins | |
| Doverphos® 6 (TDP) | Dover Chemical Corporation | Doverphos® 6 (TDP) is a clear liquid made of triisodecyl phosphite which is an alkyl phosphite with a low molecular weight and high phosphorus content. Primarily used as a heat stabilizer, it can be used in rigid and plasticized PVC applications to give b...voir plus Doverphos® 6 (TDP) is a clear liquid made of triisodecyl phosphite which is an alkyl phosphite with a low molecular weight and high phosphorus content. Primarily used as a heat stabilizer, it can be used in rigid and plasticized PVC applications to give brighter, more consistent colors and improve early color and clarity in un-pigmented compounds. Doverphos® 6 (TDP) is well suited for use in the production of polyolefins, polyurethanes, coatings, ABS, lubricants, and polyethylene terephthalate. voir moins | |
| Doverphos® 613 | Dover Chemical Corporation | Doverphos® 613 is a clear liquid made of alkyl (C12-C15) Bisphenol A Phosphite. It is primarily used to improve the color, light stability, and clarity of PVC and vinyl copolymers and can be used as a secondary stabilizer when in conjunction with primary ...voir plus Doverphos® 613 is a clear liquid made of alkyl (C12-C15) Bisphenol A Phosphite. It is primarily used to improve the color, light stability, and clarity of PVC and vinyl copolymers and can be used as a secondary stabilizer when in conjunction with primary metal stabilizers and epoxy stabilizers that commonly used in these applications. Doverphos 613 is well suited for use in the production of isocyanates either MDI, TDI, aliphatic isocyanates, rigid PVC and rigid vinyl chloride copolymers. voir moins | |
| Doverphos® 7 (PDDP) | Dover Chemical Corporation | Doverphos® 7 (PDDP) is a clear liquid made of phenyl diisodecyl phosphite and is a high molecular weight with a low phosphorus content alkyl-aryl phosphite. Primarily used as a heat stabilizer, Doverphos® 7 (PDDP) is well suited for the production of poly...voir plus Doverphos® 7 (PDDP) is a clear liquid made of phenyl diisodecyl phosphite and is a high molecular weight with a low phosphorus content alkyl-aryl phosphite. Primarily used as a heat stabilizer, Doverphos® 7 (PDDP) is well suited for the production of polyurethanes, coatings, ABS, and polycarbonates. voir moins | |
| Doverphos® 8 (DPDP) | Dover Chemical Corporation | Doverphos® 8 (DPDP) is a clear liquid made of diphenyl isodecyl phosphite. Primarily used as a heat stabilizer, it can be used in rigid and plasticized PVC applications to give brighter, more consistent colors. Doverphos® 8 (DPDP) is well suited for the p...voir plus Doverphos® 8 (DPDP) is a clear liquid made of diphenyl isodecyl phosphite. Primarily used as a heat stabilizer, it can be used in rigid and plasticized PVC applications to give brighter, more consistent colors. Doverphos® 8 (DPDP) is well suited for the production of polyurethanes, coatings, ABS, and polycarbonates. voir moins | |
| Doverphos® 9 (DPIOP) | Dover Chemical Corporation | Doverphos® 9 (DPIOP) is a clear liquid made of diphenyl isooctyl phosphite, which has a low molecular weight, and high phosphorus content of alkyl-aryl phosphites. Primarily used as a heat stablizer, it can also be used as a brightness stabilizer for mo...voir plus Doverphos® 9 (DPIOP) is a clear liquid made of diphenyl isooctyl phosphite, which has a low molecular weight, and high phosphorus content of alkyl-aryl phosphites. Primarily used as a heat stablizer, it can also be used as a brightness stabilizer for more consistent colors in PVC applications. Doverphos® 9 (DPIOP) is well suited for the production of polyurethanes, coatings, ABS, and polycarbonates. voir moins | |
| Doverphos® HiPure 4 (TNPP) | Dover Chemical Corporation | Doverphos® HiPure 4 (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) that has less than 0.1% residual nonylphenol. It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer, Doverph...voir plus Doverphos® HiPure 4 (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) that has less than 0.1% residual nonylphenol. It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer, Doverphos® HiPure 4 (TNPP) is well suited for the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® HiPure 4-HR (TNPP) | Dover Chemical Corporation | Doverphos® HiPure 4-HR (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) with approximately 0.75% triisopropanolamine and less than 0.1% residual nonyl phenol. Primarily used as a heat stabilizer, Doverphos® HiPure 4-HR (TNPP) is well suit...voir plus Doverphos® HiPure 4-HR (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) with approximately 0.75% triisopropanolamine and less than 0.1% residual nonyl phenol. Primarily used as a heat stabilizer, Doverphos® HiPure 4-HR (TNPP) is well suited for the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® S-480 | Dover Chemical Corporation | Doverphos® S-480 is a white free flowing powder of tris (2,4-di-t-butylphenyl) phosphite. It is a solid phosphite with excellent hydrolytic stability that can be used as a processing stabilizer for polymers to help control color and melt flow. Doverphos S...voir plus Doverphos® S-480 is a white free flowing powder of tris (2,4-di-t-butylphenyl) phosphite. It is a solid phosphite with excellent hydrolytic stability that can be used as a processing stabilizer for polymers to help control color and melt flow. Doverphos S-480 can also be used to stabilize polyesters, polycarbonates, polyamides, polystyrenes and elastomers. voir moins | |
| Doverphos® S-680 | Dover Chemical Corporation | Doverphos® S-680 is a solid white flake of distearyl pentaerythritol diphosphite. Primarily used as an antioxidant and stabilizer for polymers and adhesives. Doverphos® S-680 is well suited for use in the production of polyolefins, polystyrene, rubber, AB...voir plus Doverphos® S-680 is a solid white flake of distearyl pentaerythritol diphosphite. Primarily used as an antioxidant and stabilizer for polymers and adhesives. Doverphos® S-680 is well suited for use in the production of polyolefins, polystyrene, rubber, ABS, PVC, polyester, and polycarbonates. voir moins | |
| Doverphos® S-682 | Dover Chemical Corporation | Doverphos® S-682 is a solid white flake of distearyl pentaerythritol diphosphite and contains less than 1% triisopropanolamine. Primarily used as an antioxidant and stabilizer for polymers and adhesives. Doverphos® S-682 is well suited for use in the prod...voir plus Doverphos® S-682 is a solid white flake of distearyl pentaerythritol diphosphite and contains less than 1% triisopropanolamine. Primarily used as an antioxidant and stabilizer for polymers and adhesives. Doverphos® S-682 is well suited for use in the production of polyolefins, polystyrene, rubber, ABS, PVC, polyester, and polycarbonates. voir moins | |
| Doverphos® S-9228 | Dover Chemical Corporation | Doverphos® S-9228 is an off white, free flowing powder made of Bis (2,4-dicumylphenyl) pentaerythritol diphosphite. Primarily used as a solid phosphite antioxidant additive, it has excellent hydrolytic stability without the addition of inert products or ...voir plus Doverphos® S-9228 is an off white, free flowing powder made of Bis (2,4-dicumylphenyl) pentaerythritol diphosphite. Primarily used as a solid phosphite antioxidant additive, it has excellent hydrolytic stability without the addition of inert products or triisopropanol amine. Doverphos® S-9228 exhibits similar color performance as demonstrated by distearyl pentaerythritol diphosphite. Doverphos® S-9228 can be used to improve the performance of polyolefin resins, engineering resins and powder coatings. voir moins | |
| Doverphos® S-9228PC | Dover Chemical Corporation | Doverphos® S-9228PC is an off-white free flowing powder phosphite antioxidant. Primarily used to improve the performance of polyolefin resins, engineering resins and powder coatings, it offers high activity with good color, thermal and hydrolitic stabilit...voir plus Doverphos® S-9228PC is an off-white free flowing powder phosphite antioxidant. Primarily used to improve the performance of polyolefin resins, engineering resins and powder coatings, it offers high activity with good color, thermal and hydrolitic stability. Because of its high melting point, Doverphos® S-9228PC can be utilized in applications that require processing at elevated temperatures. voir moins | |
| Doverphos® S-9228T | Dover Chemical Corporation | Doverphos® S-9228T is an off-white free flowing powder phosphite antioxidant with 1% triisopropanol amine. Primarily used to improve the performance of polyolefin resins, engineering resins and powder coatings, it offers high activity with good color, th...voir plus Doverphos® S-9228T is an off-white free flowing powder phosphite antioxidant with 1% triisopropanol amine. Primarily used to improve the performance of polyolefin resins, engineering resins and powder coatings, it offers high activity with good color, thermal and hydrolitic stability. Because of its high melting point, Doverphos S-9228T can be utilized in applications that require processing at elevated temperatures. voir moins | |
| Doversperse 3-NR | Dover Chemical Corporation | Doversperse 3-NR is a cream white liquid of chlorinated paraffin aqueous emulsion of medium chain length. Primarily used as a flame retardant additive, it can improve adhesion and impart water resistance to a number of products including adhesives, rubber...voir plus Doversperse 3-NR is a cream white liquid of chlorinated paraffin aqueous emulsion of medium chain length. Primarily used as a flame retardant additive, it can improve adhesion and impart water resistance to a number of products including adhesives, rubber coatings, inks, carpet backings, paper and fabric coatings. Because of Doversperse 3-NR's non-ionic base, it can be used in both anionic and cationic emulsion systems. voir moins | |
| Doversperse A-1 | Dover Chemical Corporation | Doversperse A-1 is and off-white to beige powder and is an aqueous dispersion of C18-28 chlorinated alkane resin. Primarily used as a flame retardant additive, it can also improve adhesion and impart water or chemical resistance to products such as adhesi...voir plus Doversperse A-1 is and off-white to beige powder and is an aqueous dispersion of C18-28 chlorinated alkane resin. Primarily used as a flame retardant additive, it can also improve adhesion and impart water or chemical resistance to products such as adhesives, rubber coatings inks, carpet backings, paper and fabric coatings. Because of Doversperse A-1's non-ionic base, it is particularly useful in both anionic and cationic emulsion systems. voir moins | |
| Doversperse H-1015-P | Dover Chemical Corporation | Doversperse H-1015-P is a dark brown or amber liquid made of a polyisobutylene succinimide prepared from 950 MW HR PIBSA and high molecular weight amines. It was prepared via the thermal route, so there is no chlorine. Doversperse H-1015-P is primarily us...voir plus Doversperse H-1015-P is a dark brown or amber liquid made of a polyisobutylene succinimide prepared from 950 MW HR PIBSA and high molecular weight amines. It was prepared via the thermal route, so there is no chlorine. Doversperse H-1015-P is primarily used as a dispersant in various applications. voir moins | |
| Doversperse H-1035-P | Dover Chemical Corporation | Doversperse H-1035-P is a dark brown or amber liquid made of a polyisobutylene succinimide prepared from 950 MW HR PIBSA and high molecular weight amines. It was prepared via the thermal route, so there is no chlorine. Doversperse H-1035-P is primarily us...voir plus Doversperse H-1035-P is a dark brown or amber liquid made of a polyisobutylene succinimide prepared from 950 MW HR PIBSA and high molecular weight amines. It was prepared via the thermal route, so there is no chlorine. Doversperse H-1035-P is primarily used as a dispersant in various applications. voir moins | |
| epsilon-Caprolactone, CLO | BASF SE, Intermediates Division | Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combinatio...voir plus Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combination of flexibility and hardness (toughness) epsilon-Caprolactone can provide special mechanical properties in segmented polymers. voir moins | |
| Ethylene diamine | BASF SE, Intermediates Division | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...voir plus Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. voir moins | |
| Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone | BASF SE, Intermediates Division | Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone is effective formaldehyde scavenger in amino-resins like urea-formaldehyde (UF), melamine-formaldehyde (MF) or melamine-urea-formaldehyde (MUF) condensates. | |
| FIPOLDER™ FHP05040 | Polygroup Inc. | FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...voir plus FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. voir moins | |
| FIPOLDER™ FHP05080 | Polygroup Inc. | FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...voir plus FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. voir moins | |
| FIPOLDER™ HM300 | Polygroup Inc. | FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some applicatio...voir plus FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. FIPOLDER™ powders are well suited for a variety of applications including for use in structural paints and coatings, textiles, soap and cleaners, Etc.. voir moins |
