| BURGESS 2211 | Burgess Pigment Company | BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, a...voir plus BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
| BURGESS 30P® | Burgess Pigment Company | BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives...voir plus BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
| BURGESS 5178 | Burgess Pigment Company | BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extende...voir plus BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
| BURGESS CB | Burgess Pigment Company | BURGESS CB is a surface modified calcined aluminum silicate that has been designed for use in crosslinked polyethylene and polyester. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
| BURGESS ICEBERG® | Burgess Pigment Company | BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opa...voir plus BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opacity, higher degree of whiteness, better tint strength, easy dispersion, and low moisture levels in moisture sensitive applications. voir moins | |
| BURGESS ICECAP K® | Burgess Pigment Company | BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives...voir plus BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
| BURGESS KE | Burgess Pigment Company | BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender ...voir plus BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
| BURGESS NO. 17 | Burgess Pigment Company | BURGESS NO. 17 is a fine particle size, high brightness hydrous kaolin clay used to extend TiO2 in semigloss paints and inks. This product is well ground, has excellent whiteness and dispersion, and high brightness. | |
| BURGESS NO. 20 | Burgess Pigment Company | BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an...voir plus BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
| BURGESS NO. 30® | Burgess Pigment Company | BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and ...voir plus BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
| BURGESS NO. 40 | Burgess Pigment Company | BURGESS NO. 40 is a median particle size, medium brightness hydrous kaolin clay. This product is an acid pH clay exhibiting excellent dispersion properties, and can be used in trade sales coatings and adhesives. | |
| BURGESS NO. 60 | Burgess Pigment Company | BURGESS NO. 60 is an acid pH, fine particle size, medium brightness hydrous kaolin clay with excellent dispersion properties. This product is used in inks, adhesives and industrial finishes, electrostatic deposition body primers, and EIFS. | |
| BURGESS NO. 97 | Burgess Pigment Company | BURGESS NO. 97 is an ultra fine particle size, medium brightness hydrous kaolin clay that exhibits excellent tint strength. This product is a well-ground extender of TiO2 in semigloss, satin, and gloss paints. | |
| BURGESS OPTIPOZZ® | Burgess Pigment Company | BURGESS OPTIPOZZ® is a high reactivity metakaolin produced by a patented process. This product increases chemical resistance and durability, and reduces shrinkage. It can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
| BURGESS THERMOGLACE H | Burgess Pigment Company | BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability...voir plus BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability. voir moins | |
| Hydrorene AW 1 | S.A.P.I.C.I. SpA | Hydrorene AW 1 is a water-dispersible isocyanate. This product can be used in 2k waterborne varnishes with good chemical or abrasion resistance. It can also be used in adhesives. | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Polurene BK 50 AE | S.A.P.I.C.I. SpA | Polurene BK 50 AE is a TDI-based polymer containing blocked and curable isocyanic groups. This product can be used as an adhesive in non-woven fabrics, PVC, and fabric laminations, among other uses. It contains 50% non-volatiles. | |
| Polurene FP75 | S.A.P.I.C.I. SpA | Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates. | |
| Polurene IAX 3719 | S.A.P.I.C.I. SpA | Polurene IAX 3719 is an MDI-based polyurethane resin. This product has strong initial bond. It can be used as a 1K adhesive in PVC systems, expanded polyurethane, and natural or synthetic fabrics. | |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| Polurene LP 100 LV | S.A.P.I.C.I. SpA | Polurene LP 100 LV is a polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and can be used to improve the flexibility of epoxy systems. It is designed for use in adhesives. | |
| Polurene LP 100 NFF | S.A.P.I.C.I. SpA | Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving t...voir plus Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving the flexibility of epoxy systems. voir moins | |
| Polurene LP 80 LV | S.A.P.I.C.I. SpA | Polurene LP 80 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and memb...voir plus Polurene LP 80 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and membranes. voir moins | |
| Polurene LP 90 LV | S.A.P.I.C.I. SpA | Polurene LP 90 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and memb...voir plus Polurene LP 90 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and membranes. voir moins | |
| Polurene LPI 103 | S.A.P.I.C.I. SpA | Polurene LPI 103 is an MDI-based 1K adhesive. This product has strong initial bond. It can be used in PVC applications, expanded polyurethane, and natural or synthetic fabrics. | |
| Polurene LPI 1272 | S.A.P.I.C.I. SpA | Polurene LPI 1272 is a solvent-free MDI-based polyurethane resin. This product can be used as an adhesive in sandwich panels for thermal and acoustic insulation. It contains 100% non-volatiles. | |
| Polurene LPI 2572 | S.A.P.I.C.I. SpA | Polurene LPI 2572 is a solvent-free MDI-based polyurethane resin. This product can be used as an adhesive in sandwich panels for thermal and acoustic insulation. It contains 100% non-volatiles. | |
| Polurene LPI 407 | S.A.P.I.C.I. SpA | Polurene LPI 407is a MDI-based polyester/polyether blend 2K adhesive in ethyl acetate. This product has strong initial bond and can be used in PVC, polyurethane, and natural or synthetic fabrics. | |
| Polurene LPI 433 | S.A.P.I.C.I. SpA | Polurene LPI 433 is a MDI polyether, 2K 100% solid content adhesive. This product has strong initial bond. It can be used in PVC, expanded polyurethane, and natural or synthetic fabrics. | |
| Polurene MD 1500 | S.A.P.I.C.I. SpA | Polurene MD 1500 is a polyfunctional polyisocyanate of 4,4-diphenylmethane diisocyanate. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like sealants, synthetic mortars, and self-leveling compounds...voir plus Polurene MD 1500 is a polyfunctional polyisocyanate of 4,4-diphenylmethane diisocyanate. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like sealants, synthetic mortars, and self-leveling compounds. voir moins | |
| Polurene MD 1600 | S.A.P.I.C.I. SpA | Polurene MD 1600 is a polyfunctional polyisocyanate based on MDI. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like adhesives, 2K primers, sealants, and self-leveling compounds. | |
| Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...voir plus Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. voir moins | |
| Polurene T 70 AE | S.A.P.I.C.I. SpA | Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings w...voir plus Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings with good chemical and weather resistance. This product contains less than .5% IPDI isocyanates. voir moins | |
| Polurgreen FP75-01 | S.A.P.I.C.I. SpA | Polurgreen FP75-01 is a polyurethane adduct. This product contains less than .1% TDI isocyanates. It may be used in 2K adhesives and inks. Polurgreen FP75-01 is in accord with EU, BFR, and FDA regulations for food packaging. | |
| Rexin XP 81 | S.A.P.I.C.I. SpA | Rexin XP 81 is a linear polyester polyol based on bio-derived succinic acid and glycol. This product combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Rexin XP 82 | S.A.P.I.C.I. SpA | Rexin XP 82 is a linear polyester polyol. This product is based on bio-derived succinic acid and glycol, and it combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Rexin XP 86 | S.A.P.I.C.I. SpA | Rexin XP 86 is a linear polyester polyol. This product is based on bio-derived succinic acid and glycol, and it combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Ucopol M 541 | S.A.P.I.C.I. SpA | Ucopol M 541 is a moisture-curing prepolymer. This product can be used to formulate 1K and 2K sealants and adhesives. It can be mixed with Ucopol M 551 in order to adjust the end product's flexibility or drying time. This product contains less than .5%...voir plus Ucopol M 541 is a moisture-curing prepolymer. This product can be used to formulate 1K and 2K sealants and adhesives. It can be mixed with Ucopol M 551 in order to adjust the end product's flexibility or drying time. This product contains less than .5% TDI isocyanates. voir moins | |
| Ucopol M 551 | S.A.P.I.C.I. SpA | Ucopol M 551 is a moisture-curing prepolymer. This product can be used to formulate 1K or 2K sealants and adhesives. It can be mixed with Ucopol M 541 in order to adjust the end product's flexibility or drying time. This product contains less than .5% ...voir plus Ucopol M 551 is a moisture-curing prepolymer. This product can be used to formulate 1K or 2K sealants and adhesives. It can be mixed with Ucopol M 541 in order to adjust the end product's flexibility or drying time. This product contains less than .5% TDI isocyanates. voir moins | |
| Uni-Dur E 1001 | S.A.P.I.C.I. SpA | Uni-Dur E 1001 is an isocyanic hardener. This product can be used to cross-link polyurethane adhesives for natural or synthetic rubber. It is soluble in ethyl acetate and appears as a clear, viscous fluid. | |
| Uni-Dur E 2002 ARFE | S.A.P.I.C.I. SpA | Uni-Dur E 2002 ARFE is an adhesive that is soluble in ethyl acetate. This product significantly improves the adhesion, cohesion, and heat resistance of the final bond. It can be used to cross-link polyurethane adhesives for natural or synthetic rubber. | |
| Uni-Dur WB 7000 | S.A.P.I.C.I. SpA | Uni-Dur WB 7000 is a hardener for high-quality water-based polyurethane systems. This product can improve the resistance of adhesive bonds toward moisture, heat and solvents and is easily dispersible by mechanical stirrers. It can be used as an adhesive...voir plus Uni-Dur WB 7000 is a hardener for high-quality water-based polyurethane systems. This product can improve the resistance of adhesive bonds toward moisture, heat and solvents and is easily dispersible by mechanical stirrers. It can be used as an adhesive in footwear applications. voir moins | |
| Uni-Dur WB 7075 | S.A.P.I.C.I. SpA | Uni-Dur WB 7075 is a hardener for high-quality water-based polyurethane systems. This product can improve the resistance of adhesive bonds toward moisture, heat and solvents and is easily dispersible by mechanical stirrers. It can be used as an adhesive...voir plus Uni-Dur WB 7075 is a hardener for high-quality water-based polyurethane systems. This product can improve the resistance of adhesive bonds toward moisture, heat and solvents and is easily dispersible by mechanical stirrers. It can be used as an adhesive in footwear applications. voir moins |
