| Hydrorene AW 1 | S.A.P.I.C.I. SpA | Hydrorene AW 1 is a water-dispersible isocyanate. This product can be used in 2k waterborne varnishes with good chemical or abrasion resistance. It can also be used in adhesives. | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Polurene BK 50 AE | S.A.P.I.C.I. SpA | Polurene BK 50 AE is a TDI-based polymer containing blocked and curable isocyanic groups. This product can be used as an adhesive in non-woven fabrics, PVC, and fabric laminations, among other uses. It contains 50% non-volatiles. | |
| Polurene FP75 | S.A.P.I.C.I. SpA | Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates. | |
| Polurene IAX 3719 | S.A.P.I.C.I. SpA | Polurene IAX 3719 is an MDI-based polyurethane resin. This product has strong initial bond. It can be used as a 1K adhesive in PVC systems, expanded polyurethane, and natural or synthetic fabrics. | |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| Polurene LP 100 LV | S.A.P.I.C.I. SpA | Polurene LP 100 LV is a polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and can be used to improve the flexibility of epoxy systems. It is designed for use in adhesives. | |
| Polurene LP 100 NFF | S.A.P.I.C.I. SpA | Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving t...voir plus Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving the flexibility of epoxy systems. voir moins | |
| Polurene LP 80 LV | S.A.P.I.C.I. SpA | Polurene LP 80 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and memb...voir plus Polurene LP 80 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and membranes. voir moins | |
| Polurene LP 90 LV | S.A.P.I.C.I. SpA | Polurene LP 90 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and memb...voir plus Polurene LP 90 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and membranes. voir moins | |
| Polurene LPI 103 | S.A.P.I.C.I. SpA | Polurene LPI 103 is an MDI-based 1K adhesive. This product has strong initial bond. It can be used in PVC applications, expanded polyurethane, and natural or synthetic fabrics. | |
| Polurene LPI 1272 | S.A.P.I.C.I. SpA | Polurene LPI 1272 is a solvent-free MDI-based polyurethane resin. This product can be used as an adhesive in sandwich panels for thermal and acoustic insulation. It contains 100% non-volatiles. | |
| Polurene LPI 2572 | S.A.P.I.C.I. SpA | Polurene LPI 2572 is a solvent-free MDI-based polyurethane resin. This product can be used as an adhesive in sandwich panels for thermal and acoustic insulation. It contains 100% non-volatiles. | |
| Polurene LPI 407 | S.A.P.I.C.I. SpA | Polurene LPI 407is a MDI-based polyester/polyether blend 2K adhesive in ethyl acetate. This product has strong initial bond and can be used in PVC, polyurethane, and natural or synthetic fabrics. | |
| Polurene LPI 433 | S.A.P.I.C.I. SpA | Polurene LPI 433 is a MDI polyether, 2K 100% solid content adhesive. This product has strong initial bond. It can be used in PVC, expanded polyurethane, and natural or synthetic fabrics. | |
| Polurene MD 1500 | S.A.P.I.C.I. SpA | Polurene MD 1500 is a polyfunctional polyisocyanate of 4,4-diphenylmethane diisocyanate. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like sealants, synthetic mortars, and self-leveling compounds...voir plus Polurene MD 1500 is a polyfunctional polyisocyanate of 4,4-diphenylmethane diisocyanate. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like sealants, synthetic mortars, and self-leveling compounds. voir moins | |
| Polurene MD 1600 | S.A.P.I.C.I. SpA | Polurene MD 1600 is a polyfunctional polyisocyanate based on MDI. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like adhesives, 2K primers, sealants, and self-leveling compounds. | |
| Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...voir plus Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. voir moins | |
| Polurene T 70 AE | S.A.P.I.C.I. SpA | Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings w...voir plus Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings with good chemical and weather resistance. This product contains less than .5% IPDI isocyanates. voir moins | |
| Polurgreen FP75-01 | S.A.P.I.C.I. SpA | Polurgreen FP75-01 is a polyurethane adduct. This product contains less than .1% TDI isocyanates. It may be used in 2K adhesives and inks. Polurgreen FP75-01 is in accord with EU, BFR, and FDA regulations for food packaging. | |
| Rexin XP 81 | S.A.P.I.C.I. SpA | Rexin XP 81 is a linear polyester polyol based on bio-derived succinic acid and glycol. This product combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Rexin XP 82 | S.A.P.I.C.I. SpA | Rexin XP 82 is a linear polyester polyol. This product is based on bio-derived succinic acid and glycol, and it combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Rexin XP 86 | S.A.P.I.C.I. SpA | Rexin XP 86 is a linear polyester polyol. This product is based on bio-derived succinic acid and glycol, and it combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Ucopol M 541 | S.A.P.I.C.I. SpA | Ucopol M 541 is a moisture-curing prepolymer. This product can be used to formulate 1K and 2K sealants and adhesives. It can be mixed with Ucopol M 551 in order to adjust the end product's flexibility or drying time. This product contains less than .5%...voir plus Ucopol M 541 is a moisture-curing prepolymer. This product can be used to formulate 1K and 2K sealants and adhesives. It can be mixed with Ucopol M 551 in order to adjust the end product's flexibility or drying time. This product contains less than .5% TDI isocyanates. voir moins | |
| Ucopol M 551 | S.A.P.I.C.I. SpA | Ucopol M 551 is a moisture-curing prepolymer. This product can be used to formulate 1K or 2K sealants and adhesives. It can be mixed with Ucopol M 541 in order to adjust the end product's flexibility or drying time. This product contains less than .5% ...voir plus Ucopol M 551 is a moisture-curing prepolymer. This product can be used to formulate 1K or 2K sealants and adhesives. It can be mixed with Ucopol M 541 in order to adjust the end product's flexibility or drying time. This product contains less than .5% TDI isocyanates. voir moins | |
| Uni-Dur E 1001 | S.A.P.I.C.I. SpA | Uni-Dur E 1001 is an isocyanic hardener. This product can be used to cross-link polyurethane adhesives for natural or synthetic rubber. It is soluble in ethyl acetate and appears as a clear, viscous fluid. | |
| Uni-Dur E 2002 ARFE | S.A.P.I.C.I. SpA | Uni-Dur E 2002 ARFE is an adhesive that is soluble in ethyl acetate. This product significantly improves the adhesion, cohesion, and heat resistance of the final bond. It can be used to cross-link polyurethane adhesives for natural or synthetic rubber. | |
| Uni-Dur WB 7000 | S.A.P.I.C.I. SpA | Uni-Dur WB 7000 is a hardener for high-quality water-based polyurethane systems. This product can improve the resistance of adhesive bonds toward moisture, heat and solvents and is easily dispersible by mechanical stirrers. It can be used as an adhesive...voir plus Uni-Dur WB 7000 is a hardener for high-quality water-based polyurethane systems. This product can improve the resistance of adhesive bonds toward moisture, heat and solvents and is easily dispersible by mechanical stirrers. It can be used as an adhesive in footwear applications. voir moins | |
| Uni-Dur WB 7075 | S.A.P.I.C.I. SpA | Uni-Dur WB 7075 is a hardener for high-quality water-based polyurethane systems. This product can improve the resistance of adhesive bonds toward moisture, heat and solvents and is easily dispersible by mechanical stirrers. It can be used as an adhesive...voir plus Uni-Dur WB 7075 is a hardener for high-quality water-based polyurethane systems. This product can improve the resistance of adhesive bonds toward moisture, heat and solvents and is easily dispersible by mechanical stirrers. It can be used as an adhesive in footwear applications. voir moins | |
| ASC Automatic Sample Changer | Anton Paar Viscosity & Rheology | ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully aut...voir plus ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully automatic. This unique system not only save work but also increases the quality of the measuring results due to high reproducibility. voir moins |  |
| FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Mater...voir plus FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Materials of regular use in everyday life, such as glasses and metals, are processed or refined as melts at temperatures above 1000°C. voir moins |  |
| High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the ...voir plus High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the measurement. Measurements are performed with concentric cylinder as well as with cone-and-plate and parallel-plate geometries – a novelty in automated rheometry. The basic MCR 301 setup remains as modular and customizable as ever - with the difference that HTR 301 now performs all measuring steps automatically, operated by a robot. In its standard setup, it processes 96 samples in a single run – working for up to 24 hours a day. voir moins |  |
| Lovis 2000 M/ME Rolling-Ball Viscometer | Anton Paar Viscosity & Rheology | Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or ...voir plus Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or dynamic viscosity. Lovis 2000 M/ME is compact and economical, and saves space in the lab. It is the successor to Anton Paar’s AMVn automated microviscometer. voir moins |  |
| MCR Rheometer Series | Anton Paar Viscosity & Rheology | MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or c...voir plus MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or combination of rheological tests, both in rotational and oscillatory mode, are possible with the MCR rheometers. The modularity of the system allows the integration of a wide range of temperature devices and application-specific accessories. voir moins |  |
| RheoLabQC Quality Control Rheometer | Anton Paar Viscosity & Rheology | RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over fl...voir plus RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over flow curve and yield point determinations to complex rheological investigations. It is a rotational rheometer based on the Searle principle, which features a high-precision encoder, a highly dynamic EC motor, and is also used in the MCR rheometer series, providing excellent speed regulation. voir moins |  |
| Rheometer Measuring Head | Anton Paar Viscosity & Rheology | Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solu...voir plus Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solution for process integration or building a customized rheometer system. The modular device consists of a measuring head, which is equipped with the well-known motor and air bearing technology of the MCR series, and a separate control unit. voir moins |  |
| RheoPlus Rheometer Software | Anton Paar Viscosity & Rheology | RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data...voir plus RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data. The state-of-the-art software offers a large number of templates, automated measurement and data processing in the RheoManager, a LIM/SAP interface and 21 CFR Part 11 compatibility. voir moins |  |
