| ACCULIN® 1000 (2071A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1000 is a hard, high melting point polyethylene. | |
| ACCULIN® 1500 (2057A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is an extremely pure, inert, narrow melt point product that exhibits very specific expansion behavior. | |
| ACCULIN® 1500 (2073A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is a hard, low melting point polyethylene. | |
| ACCULIN® 2000 (2074A) | The International Group, Inc. (IGI Wax) | ACCULIN® 2000 is a hard, high melting point polyethylene. | |
| ACCULIN® 500 (2056A) | The International Group, Inc. (IGI Wax) | ACCULIN® 500 is a hard, low melting point polyethylene. | |
| ACCULIN® 600 (2059A) | The International Group, Inc. (IGI Wax) | ACCULIN® 600 is a hard, low melting point polyethylene. | |
| ACCULIN® 655 (2061A) | The International Group, Inc. (IGI Wax) | ACCULIN® 655 is a hard, low melting point polyethylene. | |
| ACCULIN® 725 (2063A) | The International Group, Inc. (IGI Wax) | ACCULIN® 725 is a hard, low melting point polyethylene. | |
| Aquaban® 9001A | The International Group, Inc. (IGI Wax) | Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution ...voir plus Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. voir moins | |
| Aquaban® 9009A | The International Group, Inc. (IGI Wax) | Aquaban® 9009A is a water-based treatment for paper and corrugated board. It imparts a high level of water repellence. | |
| Aquaban® 9010A | The International Group, Inc. (IGI Wax) | Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection ...voir plus Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. For general purpose application other than corrugated, the product can be used without dilution. voir moins | |
| ASTORLITE® J50 (4636A) | The International Group, Inc. (IGI Wax) | ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar / container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar / container candles can be made with a single filling with no top-off necessary. | |
| Bake-Guard 9156A | The International Group, Inc. (IGI Wax) | Bake-Guard 9156A is a high performance water-based coating for corrugated board and paper substrates where exceptional grease and water resistance are required. Other unique features of this product are its high angle of slide and ease of printability. | |
| Barrier-Grip 9471A | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9471B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471B is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9472B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the...voir plus Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the performance of the functional coatings. voir moins | |
| Barrier-Grip R5701H | The International Group, Inc. (IGI Wax) | Barrier-Grip R5701H is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip R6709A | The International Group, Inc. (IGI Wax) | Barrier-Grip R6709A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Seal R6728A | The International Group, Inc. (IGI Wax) | Barrier-Seal R6728A is a water-based coating designed for SBS cup stock and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, oil resistance and heat seal. | |
| EPI-REZ™ Resin 7521-WH-57 | Brenntag North America | EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concret...voir plus EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concrete substrates. EPIREZ™ Resin 7521-WH-57 exhibits good compatibility with many water-reducible amine curing agents and is designed for use with either EPIKURE™ Curing Agent 8530-W-75 or EPIKURE™ Curing Agent 6870-W-53. EPI-REZ Resin 7521-WH-57, when combined with EPIKURE™ 8530-W-75, provides a cost-effective, high-performance alternative to traditional waterborne epoxy coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. 1 Hazardous air pollutants as defined by the US Environmental Protection Agency. voir moins | Request Sample |
| EPI-REZ™ Resin 7720-W-50 | Brenntag North America | EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional so...voir plus EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional solvent-based epoxy coatings at an ultra-low VOC (<50 g/L). EPI-REZ Resin 7720-W-50 may be used in non-HAP waterborne formulations for metal and concrete substrates. EPI-REZ Resin 7720-W-50 exhibits good compatibility with a water-reducible amine curing agents. A variety of EPIKURE™ curing agents may be used with EPI-REZ Resin 7720-W-50 (e.g., EPIKURE Curing Agent 6870-W-53 and EPIKURE Curing Agent 8530-W75). voir moins | Request Sample |
| EPIKOTE™ Resin 235 | Brenntag North America | EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no dil...voir plus EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no diluent. Its principal feature, as determined in laboratory tests is that it has excellent crystallization resistance during storage. Furthermore, the addition of reactive diluents, e.g., in the production of formulated compositions, has little to no adverse effect on crystallization resistance. EPIKOTE Resin 235 also provides good pigment-wetting and good resistance to filler settling. (Note: EPIKOTE Resin 235 is one product out of a series. There are other resin blends of similar type that offer the formulator a choice of starting viscosity). voir moins | Request Sample |
| EPIKOTE™ Resin 240 | Brenntag North America | EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono...voir plus EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono-epoxidized alcohol as a reactive diluent. The resin has lower volatility and lower odor factors which are responsible for its agreeable handling characteristics. EPIKOTE 240 has superior crystallization resistance during storage. voir moins | Request Sample |
| EPIKURE™ Curing Agent 3115-U-80 | Brenntag North America | EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions ...voir plus EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions of isopropyl alcohol at 73% solids, xylene at 70 solids, and Aromatic 100 at 80% solids. Other solutions may be made available upon request. voir moins | Request Sample |
| EPIKURE™ Curing Agent 3125 | Brenntag North America | EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, pottin...voir plus EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, potting, adhesives, caulks and voir moins | Request Sample |
| EPIKURE™ Curing Agent 3393 | Brenntag North America | EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liq...voir plus EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liquid epoxy resins such as EPON Resin 8132. voir moins | Request Sample |
| EPIKURE™ Curing Agent 580 | Brenntag North America | EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop ...voir plus EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop flooring formulations with lower indoor air emissions. voir moins | Request Sample |
| EPIKURE™ Curing Agent 6870-W-53 | Brenntag North America | EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy co...voir plus EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy coatings in low VOC1, non-HAPS2 waterborne epoxy coatings. Although EPIKURE Curing Agent 6870-W-53 exhibits good compatibility with other epoxy resin dispersions, it is designed for use with EPI-REZ™ Resin 6520-WH-53. 1 VOC is the acronym for volatile organic compound, as defined by the U.S. 40CFR51.100 (s). 2 HAP is the acronym for a hazardous air pollutant, as defined by the U.S. Clean Air Act Amendments of 1990. voir moins | Request Sample |
| EPIKURE™ Curing Agent 8530-W-75 | Brenntag North America | EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to ...voir plus EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to produce ambient-cure metal and concrete coatings. EPIKURE 8530-W-75, when combined with the solid epoxy resin dispersion EPI-REZ™ Resin 7520-WD-52, provides a cost-effective, high-performance alternative to traditional solvent-borne coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. voir moins | Request Sample |
| EPIKURE LY™ Curing Agent 3801 | Brenntag North America | EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy re...voir plus EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. voir moins | Request Sample |
| EPON LY™ Resin 1810 | Brenntag North America | EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curi...voir plus EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. voir moins | Request Sample |
| EPON™ Resin 1001-CX-75 | Brenntag North America | EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resista...voir plus EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resistance, corrosion resistance, and low color. This resin is used in formulating various room temperature curing industrial maintenance coatings including clears, primers, masonry surfaces, and gloss and semigloss enamels. The base resin is also available in other solvent lineups. voir moins | Request Sample |
| EPON™ Resin 1007F | Brenntag North America | EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007...voir plus EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007F is usually reacted with urea formaldehyde or phenol-formaldehyde resins to develop the desired film properties. Coatings of this type exhibit outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Some of the more important applications for EPON Resin 1007F/ureaformaldehyde or phenol formaldehyde coatings are linings for metal containers, appliance primers, metal furniture finishes, and clear coatings for brass hardware and cosmetic cases. EPON Resin 1007F also finds application in powder coatings and may be used as a partial replacement for other EPON Resins in amine or polyamide cured two package coatings. In addition, this product can be reacted with vegetable oil acids and isocyanate curing agents to produce epoxy resin esters and urethane coatings, respectively. voir moins | Request Sample |
| EPON™ Resin 160 | Brenntag North America | EPON™ Resin 160 is a multifunctional novolac resin. It combines low viscosity and ease of processing with good thermal stability and chemical resistance for use in a number of applications. | Request Sample |
| EPON™ Resin 233 | Brenntag North America | EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with ...voir plus EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with cycloaliphatic amine curing agents. voir moins | Request Sample |
| EPON™ Resin 828 | Brenntag North America | EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obt...voir plus EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obtained. Because of this versatility, EPON Resin 828 has become a standard epoxy resin used in formulation, fabrication, and fusion technology. voir moins | Request Sample |
| EPON™ Resin 874-G-90 | Brenntag North America | EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications,...voir plus EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications, EPON Resin 874-G-90 outperforms standard liquid epoxy resin grades (e.g., EPON Resin 828) offering better flexibility and faster dry times while providing comparable performance to solid epoxy resin grades like EPON Resin 1001F. EPON Resin 874-G-90 can be formulated into non-HAPs coatings (<250 g/l VOC) that offer performance equivalent to standard epoxy-polyamide systems. A wide variety of curing agents can be used with EPON 874-G-90 including low viscosity polyamidoamines (e.g. EPIKURE™ Curing Agent 3175), cycloaliphatic amines, and amine adducts. voir moins | Request Sample |
| EPOSIL™ Resin 5550 | Brenntag North America | EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-perform...voir plus EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-performance topcoats with the potential to reduce the overall cost of ownership through improved durability and fewer coating layers. voir moins | Request Sample |
| EVACOTE® 7089A | The International Group, Inc. (IGI Wax) | EVACOTE® 7089A is a specialty formulation of petroleum waxes and polymers suitable in consistency to be utilized as a sealant and coating for fertilizer applications. | |
| EVACOTE® 7292C | The International Group, Inc. (IGI Wax) | EVACOTE® 7292C is a premium multi-component formulation having good barrier properties against both water and moisture vapor. Its low viscosity might assist in achieving better machinability for application. | |
| HELOXY™ Modifier 8 | Brenntag North America | HELOXY™ Modifier 8 is an aliphatic monoglycidyl ether containing alkyl chains that are predominately C12 and C14 in length. Its primary use is the viscosity reducing modification of epoxy resin formulations. | Request Sample |
| IGI® 0431G | The International Group, Inc. (IGI Wax) | IGI® 0431G is a crude paraffin slack wax with relatively high oil content and melting point. | |
| IGI® 1230A | The International Group, Inc. (IGI Wax) | IGI® 1230A is a fully refined paraffin wax. | |
| IGI® 1239A | The International Group, Inc. (IGI Wax) | IGI® 1239A is a fully refined wax with a mid-range melting point. | |
| IGI® 1250A | The International Group, Inc. (IGI Wax) | IGI® 1250A is a fully refined paraffin wax. | |
| IGI® 1260A | The International Group, Inc. (IGI Wax) | IGI® 1260A is a fully refined paraffin wax. | |
| IGI® 1297A | The International Group, Inc. (IGI Wax) | IGI® 1297A is a fully refined paraffin wax with excellent heat stability. | |
| IGI® 1303A | The International Group, Inc. (IGI Wax) | IGI® 1303A is a fully refined high-melt paraffin wax that is used in a variety of applications including: hot-melt adhesives, investment casting, rubber products and textiles. | |
| IGI® 2202A | The International Group, Inc. (IGI Wax) | IGI® 2202A is a semi-refined, low-melt, scale wax that is used in a variety of applications including; candles and chlorination. | |
| IGI® 2251A | The International Group, Inc. (IGI Wax) | IGI® 2251A is a flexible physiotherapy wax. IGI® 2251A is a low melting wax that is totally transparent (clear) at 125°F (52°C). | |
| IGI® 2281A | The International Group, Inc. (IGI Wax) | IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as...voir plus IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as turnips is improved by prevention of loss of moisture, while appearance is enhanced for improved marketability. Because it maintains flexibility at refrigerated temperatures, chipping and cracking of the coating is minimized when compared to other waxes. voir moins | |
| IGI® 2288A | The International Group, Inc. (IGI Wax) | IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 228...voir plus IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 2288A solidifies, it continues to release heat to the treated area. voir moins | |
| IGI® 2289A | The International Group, Inc. (IGI Wax) | IGI® 2289A is a crude scale paraffin wax derived from petroleum. | |
| IGI® 6006A | The International Group, Inc. (IGI Wax) | IGI® 6006A is a specialty wax formulation for “one pour” container candles. | |
| IGI® 6027A | The International Group, Inc. (IGI Wax) | IGI® 6027A is a specialty formulation for container candles. | |
| IGI® 6028A | The International Group, Inc. (IGI Wax) | IGI® 6028A is a specialty formulation of vegetable derived waxes and petroleum derived waxes suitable in consistency to be used for the manufacture of pillar, votive and other molded candles. | |
| IGI® 6046A | The International Group, Inc. (IGI Wax) | IGI® 6046A is a specialty formulation for use in container candles. | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| MICROSERE® 5788A | The International Group, Inc. (IGI Wax) | MICROSERE® 5788A is a unique, low-melt microcrystalline wax that is used in a variety of applications including paper packaging and candles. | |
| MICROSERE® 5806A | The International Group, Inc. (IGI Wax) | MICROSERE® 5806A is a high-melt, amber colored microcrystalline that is used in a variety of applications. | |
| MICROSERE® 5871A | The International Group, Inc. (IGI Wax) | MICROSERE® 5871A is a light colored, high-melt, microcrystalline wax that is used in a variety of applications. | |
| MICROSERE® 5890A | The International Group, Inc. (IGI Wax) | MICROSERE® 5890A is a white, high-melt, microcrystalline wax that is used in a variety of applications. MICROSERE® 5890A complies with the requirements for “Microcrystalline Wax” set by the United States Pharmacopeia (USP) / National Formulary (NF). | |
| MICROSERE® 5896A | The International Group, Inc. (IGI Wax) | MICROSERE® 5896A is a coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5897A | The International Group, Inc. (IGI Wax) | MICROSERE® 5897A is a light colored, coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5909A | The International Group, Inc. (IGI Wax) | MICROSERE® 5909A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5910A | The International Group, Inc. (IGI Wax) | MICROSERE® 5910A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5999A | The International Group, Inc. (IGI Wax) | MICROSERE® 5999A is an amber colored microcrystalline wax with hard consistency and a high melting point. | |
| Norub 9202B Green | The International Group, Inc. (IGI Wax) | Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. Thi...voir plus Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. This product is an ideal non-scuff coating which can be used for packaging office furniture, filing cabinets, household goods, and most speciality metal products - wherever non-abrasiveness is required. voir moins | |
| P. GLYCOL ETHER DPNB | Brenntag North America | P. GLYCOL ETHER DPNB (Dipropylene glycol n-butyl ether) is a colourless liquid with a mild odour and low volatility. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, texti...voir plus P. GLYCOL ETHER DPNB (Dipropylene glycol n-butyl ether) is a colourless liquid with a mild odour and low volatility. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaners, agricultural products, and adhesives. voir moins | Request Sample |
| P. GLYCOL ETHER PNB | Brenntag North America | P. GLYCOL ETHER PNB (Propylene glycol n-butyl ether) is a colourless liquid with a characteristic odour. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaner...voir plus P. GLYCOL ETHER PNB (Propylene glycol n-butyl ether) is a colourless liquid with a characteristic odour. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaners, and adhesives. voir moins | Request Sample |
| P. GLYCOL ETHER PPH | Brenntag North America | P. GLYCOL ETHER PPH (P. Glycol ether PPH) is a slow-evaporating, very hydrophobic glycol ether ideal in coalescing and carrier solvent applications. It has a low odor. Ideal for use in latex coalescent in water-based architectural and industrial coatings,...voir plus P. GLYCOL ETHER PPH (P. Glycol ether PPH) is a slow-evaporating, very hydrophobic glycol ether ideal in coalescing and carrier solvent applications. It has a low odor. Ideal for use in latex coalescent in water-based architectural and industrial coatings, carrier solvent for textile dyes, solvent for inks in ball point and felt tip pens, stamp pads, and textile printing pastes, paint removers, coalescent for latex adhesives, and is useful in the formulation of homogeneous, stable metalworking fluids. voir moins | Request Sample |
| PARAFFLEX® 4625A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4625A is a specialty formulation of petroleum waxes suitable for the manufacture of scented pillar, votive and other molded candles. | |
| PARAFFLEX® 4630A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4630A is a soft, smooth and creamy looking blend specially formulated for single pour container candles. | |
| PARAFFLEX® 4797A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4797A is a premium grade cascading wax for treatment of corrugated paperboard. | |
| PETAX® 0310A | The International Group, Inc. (IGI Wax) | PETAX® 0310A is a cream white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0310A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0320A | The International Group, Inc. (IGI Wax) | PETAX® 0320A is a cream white, odorless petrolatum with a soft consistency and medium fiber length. PETAX® 0320A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0386A | The International Group, Inc. (IGI Wax) | PETAX® 0386A is a white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0386A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETROFIBE® 0201A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0201A is a dark brown industrial grade petrolatum of medium-hard consistency. PETROFIBE® 0201A finds economical use in applications not requiring the more expensive USP or NF grades. | |
| PETROFIBE® 0251A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0251A is a mixture of soft petroleum waxes. | |
| Research Curing Agent RSC-4628 | Brenntag North America | Research Curing Agent RSC-4628 is a light color, very low viscosity, amino silane curing agent that is used with EPOSIL™ Resin 5550 for the development of lower yellowing protective topcoats. | Request Sample |
| VAPORGUARD® R5341B | The International Group, Inc. (IGI Wax) | VAPORGUARD® R5341B is a water-based coating designed for corrugated board liners and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, and low rate of moisture vapor transmission (MVTR). | |
| VAPORGUARD® R5715A | The International Group, Inc. (IGI Wax) | VAPORGUARD® R5715A is a water-based coating designed for kraft liners. It can be used for any packaging application that requires excellent water resistance, and low rate of moisture vapor transmission (MVTR). |
