| BYD-1318 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is...voir plus BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. voir moins | |
| BYD2600 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, an...voir plus BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. voir moins | |
| BYD3102 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3102, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in non-woven fabric adhesives. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. | |
| HE100 | Tianyi Chemical Engineering Material Co., Ltd. | HE100, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or S...voir plus HE100, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. voir moins | |
| HE105 | Tianyi Chemical Engineering Material Co., Ltd. | HE105, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or S...voir plus HE105, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. voir moins | |
| HE85 | Tianyi Chemical Engineering Material Co., Ltd. | HE85, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. Thi...voir plus HE85, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. voir moins | |
| HE90 | Tianyi Chemical Engineering Material Co., Ltd. | HE90, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. Thi...voir plus HE90, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. voir moins | |
| HE95 | Tianyi Chemical Engineering Material Co., Ltd. | HE95, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SB...voir plus HE95, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. voir moins | |
| HS2255 | Tianyi Chemical Engineering Material Co., Ltd. | HS2255, in the form of a transparent, light yellow, viscous liquid, is an epoxy resin that can be used as an adhesive in solvent-free coatings and concrete floor paint applications. This product contains less than 300 ppm of inorganic chlorine. It conta...voir plus HS2255, in the form of a transparent, light yellow, viscous liquid, is an epoxy resin that can be used as an adhesive in solvent-free coatings and concrete floor paint applications. This product contains less than 300 ppm of inorganic chlorine. It contains less than .7% easily saponified chlorine. voir moins | |
| HS9630 | Tianyi Chemical Engineering Material Co., Ltd. | HS9630, in the form of a transparent liquid, is a reactive monomer resin that can be used in paints, inks, and as a binder in adhesives. This product shows good weather resistance and adhesion to plastics. If one increases the number of acrylate or meth...voir plus HS9630, in the form of a transparent liquid, is a reactive monomer resin that can be used in paints, inks, and as a binder in adhesives. This product shows good weather resistance and adhesion to plastics. If one increases the number of acrylate or methacrylic ester optical activity groups, one will increase its cure rate with high rigidity and good dilution effects. voir moins | |
| HS9705 | Tianyi Chemical Engineering Material Co., Ltd. | HS9705, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in offset printing inks, screen printing inks, and adhesives. This product is resistant to boiling water and exhibits low shrinkage properties. | |
| HS971 | Tianyi Chemical Engineering Material Co., Ltd. | HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...voir plus HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. voir moins | |
| HS973 | Tianyi Chemical Engineering Material Co., Ltd. | HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...voir plus HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. voir moins | |
| HS975 | Tianyi Chemical Engineering Material Co., Ltd. | HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...voir plus HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. voir moins | |
| HT100 | Tianyi Chemical Engineering Material Co., Ltd. | HT100, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...voir plus HT100, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. voir moins | |
| HT105 | Tianyi Chemical Engineering Material Co., Ltd. | HT105, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...voir plus HT105, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. voir moins | |
| HT115 | Tianyi Chemical Engineering Material Co., Ltd. | HT115, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...voir plus HT115, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. voir moins | |
| HT85 | Tianyi Chemical Engineering Material Co., Ltd. | HT85, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product ...voir plus HT85, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. voir moins | |
| HT90 | Tianyi Chemical Engineering Material Co., Ltd. | HT90, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product ...voir plus HT90, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. voir moins | |
| HT95 | Tianyi Chemical Engineering Material Co., Ltd. | HT95, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This p...voir plus HT95, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. voir moins | |
| Isocryl® C-70 | Estron Chemical, Inc. | Isocryl® C-70 is a moderate to high Tg carboxyl functional solid acrylic resin suitable for use as a curative resin in epoxy formulations, such as acrylic hybrid powder coatings, industrial solvent based coatings, or adhesives. Isocryl® C-70 can afford co...voir plus Isocryl® C-70 is a moderate to high Tg carboxyl functional solid acrylic resin suitable for use as a curative resin in epoxy formulations, such as acrylic hybrid powder coatings, industrial solvent based coatings, or adhesives. Isocryl® C-70 can afford coatings or adhesives with excellent chemical resistance, flexibility, outdoor durability, green strength, modulus and impact resistance. Because of its relatively high acid value, Isocryl® C-70 may provide enhanced adhesion to certain substrates and may be a good pigment dispersing resin. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Lumicryl® 1928 | Estron Chemical, Inc. | Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-form...voir plus Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-forming component or as an adhesion promoting additive in UV/EB formulations for various applications. voir moins | |
| Polytex™ E-100 | Estron Chemical, Inc. | Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. P...voir plus Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-100 has excellent compatibility with most commercial polymeric binders, pigments and plasticizers. voir moins | |
| Polytex™ E-75 | Estron Chemical, Inc. | Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a for...voir plus Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a formaldehyde-free resin alternative for nail lacquers. Polytex™ E-75 has compatibility with most commercial polymeric binders, pigments and plasticizers. voir moins | |
| Resiflow® L-37 | Estron Chemical, Inc. | Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and...voir plus Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and is especially effective in urethane acrylates, epoxy acrylates, polyesters, and epoxies. Recommended level of usage is 0.1%-0.5% based on solids. Resiflow® L-37 can be cut in various reactive diluents, aromatic and aliphatic hydrocarbons, esters, ketones, or alcohols for easy incorporation into the formula. voir moins | |
| Sulfonex™ M-80 | Estron Chemical, Inc. | Sulfonex™ M-80 is a tosylamide/formaldehyde resin used as a modifier in lacquers, inks and adhesives to promote gloss, adhesion and overall durability. Sulfonex™ M-80 has compatibility with most commercial polymeric binders, pigments, dyes and plasticize...voir plus Sulfonex™ M-80 is a tosylamide/formaldehyde resin used as a modifier in lacquers, inks and adhesives to promote gloss, adhesion and overall durability. Sulfonex™ M-80 has compatibility with most commercial polymeric binders, pigments, dyes and plasticizers. Solutions of Sulfonex™ M-80 have a low viscosity and offer the advantage of formulating high solids lacquers. Sulfonex™ M-80 improves the compatibility of resins with plasticizers and pigments which may otherwise remain incompatible. In adhesives formulations, Sulfonex™ M-80 helps in bonding many substrates such as cellophane and aluminum foils to themselves or to paper. voir moins |
