UL Prospector
Prospector

Succès!

Vous avez enregistré votre recherche avec succès
16 Résultats
Deuteron LE 100 LV Antistatic Agent P.A.T. Products Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing ...voir plus Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems. Deuteron LE 100 LV can be used in many applications including epoxy flooring, PUR-foams (the production of shoe-soles for example), UV or electron-beam curing screen inks to avoid electrostatic charge, and 3D printing. Deuteron LE 100 LV has a cationic character and an extremely high polarity. This allows for considerable reduction in electrical resistance even when using small quatities. voir moins Request Sample
Deuteron MK Matting Agent P.A.T. Products Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...voir plus Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins Request Sample
Deuteron MK-F Matting Agent P.A.T. Products Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...voir plus Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins Request Sample
Deuteron MK-F6 Matting Agent P.A.T. Products Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...voir plus Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins Request Sample
Deuteron MM 659 Matting Agent for UV Systems P.A.T. Products Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...voir plus Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. voir moins Request Sample
Deuteron MM 677 Aqueous Matting Liquid P.A.T. Products Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...voir plus Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. voir moins Request Sample
Deuteron MM 823 Scratch Resistance Additive P.A.T. Products Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...voir plus Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. voir moins Request Sample
Deuteron PMH C Thermoset Matting Agent P.A.T. Products Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...voir plus Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. voir moins Request Sample
Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems P.A.T. Products Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. voir moins Request Sample
Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems P.A.T. Products Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. voir moins Request Sample
Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems P.A.T. Products Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems.  Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. voir moins Request Sample
Lansperse BIO868 P.A.T. Products Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fas...voir plus Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fast reduction of particle size, and sustainability profiling. voir moins Request Sample
ProFlex 4 P.A.T. Products ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylo...voir plus ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylon-11 and Nylon-12. The addition of this plasticizer contributes to, improved mold release, improved machining, better finish, reduced water absorption, improved shape stability, and heat stability to 80 °C (176 °F). ProFlex 4 can be injected during the hot compounding process of polyamide without generating fumes or deposits in the vacuum hoses. Applications include packaging, A/C hoses, filaments, lubrication hoses, air brake tubing, and vacuum / hydraulic tubing. voir moins Request Sample
ProFlex 8 P.A.T. Products ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes ny...voir plus ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes nylon, other polyamides, shellac, cellulose acetate, and protein materials. It is outstanding for making compounds resistant to oils, solvents, and greases. Because of its low solubility in petroleum hydrocarbons, ProFlex 8 may be used to produce grease and oil-resistant coatings and adhesives. Nitrocellulose lacquers resistant to grease and aliphatic hydrocarbons may be made by combining ProFlex 8 with ProFlex MH (a sulfonamide-formaldehyde resin). In nylon and other polyamides, ProFlex 8 aids processing by lowering the melting point and improving low temperature flexibility. Cellulose acetate plasticized with ProFlex 8 has a brilliance an polish not obtained with other plasticizers, and sheets and films obtain high tensile strength, elongation and flexibility. Polyvinyl acetate adhesives plasticized with ProFlex 8 show exceptional grease resistance and have a quick tack and adhesion for joining difficult surfaces such as rubber to metal. ProFlex 8 is an excellent dye solvent and pigment dispersant. voir moins Request Sample
ProFlex 9S P.A.T. Products ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts ...voir plus ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts improved impact resistance, reduced shrinkage and wrap of the hardened laminate. ProFlex 9S can also be used in low pressure melamine formaldehyde laminates, urea formaldehyde resins, and as reactive plasticizer in epoxy, polyurethane, and melamine based resins. In addition, systems reacted with ProFlex 9S show improved resistance to oils, solvents, and moisture. ProFlex 9S has good UV and thermal stability. In coatings it imparts fungicidal activity. Applications include melamine based laminates, melamine based coatings, melamine/urea formaldehyde wood adhesives, phenol/resorcinol formaldehyde wood adhesives, epoxy coating and adhesives, polyurethane coating and adhesives, raw material for fluorescent pigments, and brightening agent for metal plating. voir moins Request Sample
ProFlex MS 80 P.A.T. Products ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nit...voir plus ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nitrocellulose based nail lacquers. ProFlex MS 80 has the advantage that it can be easily poured into formulation during the production process. ProFlex MS 80 imparts improved adhesion and wear properties and generally provides the lacquer system with a shiny glossy appearance. ProFlex MS 80 can also be used as plasticizing resin in solvent borne coating and ink formulations. In these applications ProFlex MS 80 acts as a non-migratory plasticizing co-resin improving the adhesion and gloss of the system. Applications include nail lacquers, nitrocellulose coatings, cellulose acetate formulations, and printing inks. voir moins Request Sample