UL Prospector

Succès!

Vous avez enregistré votre recherche avec succès
Request Sample Deuteron LE 100 LV Antistatic Agent P.A.T. Products Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing ...voir plus Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems. Deuteron LE 100 LV can be used in many applications including epoxy flooring, PUR-foams (the production of shoe-soles for example), UV or electron-beam curing screen inks to avoid electrostatic charge, and 3D printing. Deuteron LE 100 LV has a cationic character and an extremely high polarity. This allows for considerable reduction in electrical resistance even when using small quatities. voir moins
Request Sample Deuteron MK Matting Agent P.A.T. Products Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...voir plus Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins
Request Sample Deuteron MK-F Matting Agent P.A.T. Products Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...voir plus Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins
Request Sample Deuteron MK-F6 Matting Agent P.A.T. Products Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...voir plus Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins
Request Sample Deuteron MM 659 Matting Agent for UV Systems P.A.T. Products Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...voir plus Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. voir moins
Request Sample Deuteron MM 677 Aqueous Matting Liquid P.A.T. Products Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...voir plus Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. voir moins
Request Sample Deuteron MM 823 Scratch Resistance Additive P.A.T. Products Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...voir plus Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. voir moins
Request Sample Deuteron PMH C Thermoset Matting Agent P.A.T. Products Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...voir plus Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. voir moins
Request Sample Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems P.A.T. Products Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. voir moins
Request Sample Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems P.A.T. Products Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. voir moins
Request Sample Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems P.A.T. Products Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems.  Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. voir moins
KTR-100 Suparna Chemicals Ltd. KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins
KTR-118 Suparna Chemicals Ltd. KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins
KTR-123 Suparna Chemicals Ltd. KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins
Request Sample ProFlex 4 P.A.T. Products ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylo...voir plus ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylon-11 and Nylon-12. The addition of this plasticizer contributes to, improved mold release, improved machining, better finish, reduced water absorption, improved shape stability, and heat stability to 80 °C (176 °F). ProFlex 4 can be injected during the hot compounding process of polyamide without generating fumes or deposits in the vacuum hoses. Applications include packaging, A/C hoses, filaments, lubrication hoses, air brake tubing, and vacuum / hydraulic tubing. voir moins
Request Sample ProFlex 8 P.A.T. Products ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes ny...voir plus ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes nylon, other polyamides, shellac, cellulose acetate, and protein materials. It is outstanding for making compounds resistant to oils, solvents, and greases. Because of its low solubility in petroleum hydrocarbons, ProFlex 8 may be used to produce grease and oil-resistant coatings and adhesives. Nitrocellulose lacquers resistant to grease and aliphatic hydrocarbons may be made by combining ProFlex 8 with ProFlex MH (a sulfonamide-formaldehyde resin). In nylon and other polyamides, ProFlex 8 aids processing by lowering the melting point and improving low temperature flexibility. Cellulose acetate plasticized with ProFlex 8 has a brilliance an polish not obtained with other plasticizers, and sheets and films obtain high tensile strength, elongation and flexibility. Polyvinyl acetate adhesives plasticized with ProFlex 8 show exceptional grease resistance and have a quick tack and adhesion for joining difficult surfaces such as rubber to metal. ProFlex 8 is an excellent dye solvent and pigment dispersant. voir moins
Request Sample ProFlex 9S P.A.T. Products ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts ...voir plus ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts improved impact resistance, reduced shrinkage and wrap of the hardened laminate. ProFlex 9S can also be used in low pressure melamine formaldehyde laminates, urea formaldehyde resins, and as reactive plasticizer in epoxy, polyurethane, and melamine based resins. In addition, systems reacted with ProFlex 9S show improved resistance to oils, solvents, and moisture. ProFlex 9S has good UV and thermal stability. In coatings it imparts fungicidal activity. Applications include melamine based laminates, melamine based coatings, melamine/urea formaldehyde wood adhesives, phenol/resorcinol formaldehyde wood adhesives, epoxy coating and adhesives, polyurethane coating and adhesives, raw material for fluorescent pigments, and brightening agent for metal plating. voir moins
Request Sample ProFlex MS 80 P.A.T. Products ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nit...voir plus ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nitrocellulose based nail lacquers. ProFlex MS 80 has the advantage that it can be easily poured into formulation during the production process. ProFlex MS 80 imparts improved adhesion and wear properties and generally provides the lacquer system with a shiny glossy appearance. ProFlex MS 80 can also be used as plasticizing resin in solvent borne coating and ink formulations. In these applications ProFlex MS 80 acts as a non-migratory plasticizing co-resin improving the adhesion and gloss of the system. Applications include nail lacquers, nitrocellulose coatings, cellulose acetate formulations, and printing inks. voir moins
Request Sample RF 10 Resin Formulators (E.V. Roberts) RF 10 curing agent is a technical grade of tris-(dimethylaminomethyl) phenol, a versatile Lewis Base catalyst for curing epoxy resins. It is used both as a curing agent (adhesives applications) and as an activator for other curing agents including amidoam...voir plus RF 10 curing agent is a technical grade of tris-(dimethylaminomethyl) phenol, a versatile Lewis Base catalyst for curing epoxy resins. It is used both as a curing agent (adhesives applications) and as an activator for other curing agents including amidoamines, amine adducts and polyamides. It is also the preferred catalyst for blends of liquid epoxy resin and liquid polysulfides for body solder, sealant and concrete adhesives applications. Also, it is a highly efficient catalyst for epoxy resins cured with polycarboxylic acids and anhydrides. voir moins
Request Sample RF 1120 A/B Resin Formulators (E.V. Roberts) RF 1120 A/B is a two-part epoxy adhesive system for bonding a wide variety of substrates. This product is thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1120 is also supplied in a one part premixed an...voir plus RF 1120 A/B is a two-part epoxy adhesive system for bonding a wide variety of substrates. This product is thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1120 is also supplied in a one part premixed and frozen form. RF 1120 Blue is manufactured to MT-5-20. voir moins
Request Sample RF 1141 A/B Resin Formulators (E.V. Roberts) RF 1141 A/B is a two-part low-density epoxy syntactic system. It is qualified to SCGMS 58001, Type 2, Class 1 or Class 2. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out. RF 1141 can be supplied in S...voir plus RF 1141 A/B is a two-part low-density epoxy syntactic system. It is qualified to SCGMS 58001, Type 2, Class 1 or Class 2. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out. RF 1141 can be supplied in Semkits. voir moins
Request Sample RF 1144 A/B Kit Resin Formulators (E.V. Roberts) RF 1144 A/B Kit is a two-part heat cured, low density, high strength, syntactic system that is formulated for continuous service at high temperatures. RF 1144 has excellent mechanical properties up to 350°F.
Request Sample RF 1350M4 A/B Resin Formulators (E.V. Roberts) RF 1350M4 A/B is a two-part, quick curing, natural colored urethane adhesive/potting system. It has a shore A hardness between 60-65. This system was developed for potting connectors; small electronic components were flexibility is needed. RF 1350M4 A/B d...voir plus RF 1350M4 A/B is a two-part, quick curing, natural colored urethane adhesive/potting system. It has a shore A hardness between 60-65. This system was developed for potting connectors; small electronic components were flexibility is needed. RF 1350M4 A/B does not contain TDI or MOCA, and is easily mixed into a pourable material. When cured, this urethane system produces a flexible elastomer with excellent toughness, high elongation, and has very good adhesive strength to a variety of plastics. voir moins
Request Sample RF 1366 Resin Formulators (E.V. Roberts) RF 1366 is a medium viscosity standard epoxy resin designed for potting, encapsulating and filament winding. It can be used with a wide variety of curing agents to generate products with a broad range of work lives, cure conditions and mechanical properti...voir plus RF 1366 is a medium viscosity standard epoxy resin designed for potting, encapsulating and filament winding. It can be used with a wide variety of curing agents to generate products with a broad range of work lives, cure conditions and mechanical properties. This system can be cured in high humidity and low temperatures and produces a hard glossy surface. RF 1366 offers very good wet out and can produce a high strength laminate. In addition, this resin can be used for coating, potting and encapsulating small electronic components and exhibits good electrical properties. voir moins
Request Sample RF 1386 A/B Kit Resin Formulators (E.V. Roberts) RF 1386 A/B Kit is a two-part, thixotropic, high strength epoxy adhesive system designed for use in food packaging and water filtration applications and meets the requirements of provision 21 CFR 175.105. The raw materials used in RF 1386 are listed for u...voir plus RF 1386 A/B Kit is a two-part, thixotropic, high strength epoxy adhesive system designed for use in food packaging and water filtration applications and meets the requirements of provision 21 CFR 175.105. The raw materials used in RF 1386 are listed for use in “Food Packaging Adhesive” applications and are classified as FDA Approved under the same provision. It has excellent wet out and can easily penetrate fibrous substrates. RF 1386 has exceptional adhesive strength to a wide variety of substrates, including membranes, separators and other material used in reverse osmosis. voir moins
Request Sample RF 1392 A/B Resin Formulators (E.V. Roberts) RF 1392 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1392 A/B has excel...voir plus RF 1392 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1392 A/B has excellent adhesion to metal and plastic substrates as well as excellent water soak and environmental resistance. voir moins
Request Sample RF 1393 A/B Resin Formulators (E.V. Roberts) RF 1393 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1393 A/B has excel...voir plus RF 1393 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1393 A/B has excellent adhesion to metal and plastic substrates as well as excellent water soak and environmental resistance. RF 1393 A/B has been used to bond Fluorocarbon sheeting to steel structures. voir moins
Request Sample RF 14 Resin Formulators (E.V. Roberts) RF 14 is a standard polyamine (TETA) curing agent for use with liquid epoxy resins. It provides rapid cures at ambient temperature, excellent chemical resistance and intermediate temperature resistance. Compared with DETA, it has a lower vapor pressure, i...voir plus RF 14 is a standard polyamine (TETA) curing agent for use with liquid epoxy resins. It provides rapid cures at ambient temperature, excellent chemical resistance and intermediate temperature resistance. Compared with DETA, it has a lower vapor pressure, is somewhat less hygroscopic and does not carbamate as readily. voir moins
Request Sample RF 1591BK A/B Resin Formulators (E.V. Roberts) RF 1591BK A/B is a low viscosity potting system. This system will meet the UL 94V-0 burn test as a self-extinguishing system. RF 1591BK A/B has good thermal conductivity, chemical and thermal shock resistance. It has very good adhesion to a variety of sub...voir plus RF 1591BK A/B is a low viscosity potting system. This system will meet the UL 94V-0 burn test as a self-extinguishing system. RF 1591BK A/B has good thermal conductivity, chemical and thermal shock resistance. It has very good adhesion to a variety of substrates. voir moins
Request Sample RF 1710 A/B Resin Formulators (E.V. Roberts) RF 1710 A/B is a two-component polyurethane rigid foam system. It was formulated to resist high temperatures. It is also CFC free. This resin system is used whenever rigid closed cell foam is needed. Applications include thermal insulation of pipes, tanks...voir plus RF 1710 A/B is a two-component polyurethane rigid foam system. It was formulated to resist high temperatures. It is also CFC free. This resin system is used whenever rigid closed cell foam is needed. Applications include thermal insulation of pipes, tanks, and panels. voir moins
Request Sample RF 1735 A/B Resin Formulators (E.V. Roberts) RF 1735 is an easy-to-use, two-part, medium-soft (Shore 60A), high temperature, urethane potting compound. It does not contain TDI or MOCA. This product is also available in a blue version as RF 1735 Blue Mod-1, all other properties are identical. RF 1735...voir plus RF 1735 is an easy-to-use, two-part, medium-soft (Shore 60A), high temperature, urethane potting compound. It does not contain TDI or MOCA. This product is also available in a blue version as RF 1735 Blue Mod-1, all other properties are identical. RF 1735 has excellent hydrolytic stability. Thirty days at 100°C and 95% relative humidity has little effect on the properties. Thermal stability is exceptional, with intermittent temperatures as high as 150°C causing little or no degradation. The material remains thermally stable to temperatures well below -60°F (50°C) with a brittle point less than -60°C. Excursions well below the brittle point have no effect on the physical properties of the polymer. voir moins
Request Sample RF 1902 (AS) A/B Kit Resin Formulators (E.V. Roberts) RF 1902 (AS) A/B Kit is a low viscosity, low density, epoxy system designed for potting and encapsulating. This product is pourable when mixed and will cure at room temperature. This system will bond to a wide variety of substrates. Castings can be machin...voir plus RF 1902 (AS) A/B Kit is a low viscosity, low density, epoxy system designed for potting and encapsulating. This product is pourable when mixed and will cure at room temperature. This system will bond to a wide variety of substrates. Castings can be machined or sanded within 16 to 24 hours. voir moins
Request Sample RF 2108 A/B Resin Formulators (E.V. Roberts) RF 2108 A/B is an epoxy adhesive system for bonding a wide variety of substrates. This product is a reduced viscosity version of RF 912 and is slightly thixotropic. RF 2108 part A is composed of a Bis-Phenol-A epoxy resin blend with suitable inert fillers...voir plus RF 2108 A/B is an epoxy adhesive system for bonding a wide variety of substrates. This product is a reduced viscosity version of RF 912 and is slightly thixotropic. RF 2108 part A is composed of a Bis-Phenol-A epoxy resin blend with suitable inert fillers. RF 2108 part B is a blend of polyamide resins and suitable fillers. There are no solvents or any other chemical present that would cause any incompatibility with plastic substrates. voir moins
Request Sample RF 2388 1-Component Resin Formulators (E.V. Roberts) RF 2388 is a 1-Component anti-corrosion paste adhesive system for aluminum substrates with excellent high temperature properties.
Request Sample RF 24 Resin Formulators (E.V. Roberts) RF 24 is a cycloaliphatic amine curing agent used to cure various epoxy resins at elevated temperatures. This particular curing agent offers light color, low viscosity, long pot life and high glass transition temperature (Tg). Because of its light color, ...voir plus RF 24 is a cycloaliphatic amine curing agent used to cure various epoxy resins at elevated temperatures. This particular curing agent offers light color, low viscosity, long pot life and high glass transition temperature (Tg). Because of its light color, absence of staining and excellent physical properties, it is recommended has a replacement for aromatic amines. voir moins
Request Sample RF 2869 Mod 2 Resin Formulators (E.V. Roberts) RF 2869 Mod 2 is a one-part, silver filled, electrically conductive epoxy adhesive. This system does not require mixing or vacuum degassing. Cure is achieved at temperatures as low as 82°C (180°F) for one hour or a short dwell at 121°C (250°F) for three m...voir plus RF 2869 Mod 2 is a one-part, silver filled, electrically conductive epoxy adhesive. This system does not require mixing or vacuum degassing. Cure is achieved at temperatures as low as 82°C (180°F) for one hour or a short dwell at 121°C (250°F) for three minutes. Because RF 2869 Mod 2 is already vacuum degassed during manufacturing and no mixing is required, a void free casting or bond line is easily achieved. When cured, this adhesive will have very high thermal and electrical conductive properties. voir moins
Request Sample RF 2969 (Mod 4) A/B Kit Resin Formulators (E.V. Roberts) RF 2969 (Mod 4) A/B Kit is a thixotropic, high strength epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed where hot solder applications are impractical or on parts which cannot be subjected to h...voir plus RF 2969 (Mod 4) A/B Kit is a thixotropic, high strength epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed where hot solder applications are impractical or on parts which cannot be subjected to heat. RF 2969 (Mod 4) is also effective as a shielding material. Open working time is 45 minutes and full cure is achieved in 24 hours at room temperature. voir moins
Request Sample RF 2970 A/B Resin Formulators (E.V. Roberts) RF 2970 A/B is a thixotropic, fast setting, high strength epoxy adhesive with good physical strength and high electrical conductivity. This material is designed for applications where hot solder applications are impractical or on parts which cannot be sub...voir plus RF 2970 A/B is a thixotropic, fast setting, high strength epoxy adhesive with good physical strength and high electrical conductivity. This material is designed for applications where hot solder applications are impractical or on parts which cannot be subjected to heat. voir moins
Request Sample RF 30 Resin Formulators (E.V. Roberts) RF 35 is a di-functional polyglycol amine curing agent used to cure various epoxy resins at elevated temperatures. This particular curing agent offers light color, low viscosity, long pot life, high elongation and excellent thermal shock resistance.
Request Sample RF 3000 Resin Formulators (E.V. Roberts) RF 3000 is a modified low viscosity Bisphenol A epoxy resin. It has viscosity of 500-700 cps at 77°F.
Request Sample RF 32 Resin Formulators (E.V. Roberts) RF 35 is a modified aromatic amine. It offers long pot life coupled with rapid cure response. RF 32 is non-staining and has physical properties and chemical resistances equivalent to MDA cured resins.
Request Sample RF 4010 Resin Formulators (E.V. Roberts) RF 4010 is medium viscosity modified bisphenol A epoxy. It is suitable for laminating, potting and RTM applications. The diluent in RF 4010 was chosen to minimize the effect on Tg, chemical resistance and reduce skin irritation. It does not contain butyl ...voir plus RF 4010 is medium viscosity modified bisphenol A epoxy. It is suitable for laminating, potting and RTM applications. The diluent in RF 4010 was chosen to minimize the effect on Tg, chemical resistance and reduce skin irritation. It does not contain butyl glycidyl ether (BGE) or cresyl glycidyl ether (CGE). The cured properties of RF 4010 will depend on the choice of hardener. voir moins
Request Sample RF 4407 Resin Formulators (E.V. Roberts) RF 4407 is a filled epoxy resin designed for potting or casting applications. Various curing agents can be used to achieve particular end properties. Regardless of which curing agent is used, the end product will be a thermally conductive plastic. RF 4407...voir plus RF 4407 is a filled epoxy resin designed for potting or casting applications. Various curing agents can be used to achieve particular end properties. Regardless of which curing agent is used, the end product will be a thermally conductive plastic. RF 4407 can be colored with any of the RF color concentrates. RF 4407-130 is colored black, RF 4407-139 is the white version. RF 4408 is the thixotropic version of RF 4407 when a soft paste is required prior to cure. voir moins
Request Sample RF 46 Resin Formulators (E.V. Roberts) RF 46 is a standard, medium viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios it cures to hard, durabl...voir plus RF 46 is a standard, medium viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios it cures to hard, durable, moisture and chemical resistant plastics. The ratios can be extended to 1:1 by weight to improve flexibility. voir moins
Request Sample RF 47 Resin Formulators (E.V. Roberts) RF 47 is a standard, medium viscosity, polyamide resins for ambient curing of epoxy resins. They are intended as equivalent “drop-ins” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios they cure to hard, dur...voir plus RF 47 is a standard, medium viscosity, polyamide resins for ambient curing of epoxy resins. They are intended as equivalent “drop-ins” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios they cure to hard, durable, moisture and chemical resistant plastics. The ratios can be extended to 1:1 by weight to improve flexibility. RF 47 complies with FDA 21 CFR 175.300, 21 CFR 176.170 and 21 CFR 175.105. RF 46 is a TETA free version of RF 47. voir moins
Request Sample RF 5000 Resin Formulators (E.V. Roberts) RF 5000 is a standard viscosity Bisphenol A epoxy resin. It has a viscosity of 11,000-15,000 cps at 77°F.
Request Sample RF 5061 A/B Kit Resin Formulators (E.V. Roberts) RF 5061 A/B Kit is a two-part, semi-thixotropic epoxy paste designed for bonding soft, semi-porous materials such as wood, ceramic or composites. RF 5061 (Mod 1) and (Mod 2) are accelerated versions of RF 5061 that reduce fixturing time. When heated to 15...voir plus RF 5061 A/B Kit is a two-part, semi-thixotropic epoxy paste designed for bonding soft, semi-porous materials such as wood, ceramic or composites. RF 5061 (Mod 1) and (Mod 2) are accelerated versions of RF 5061 that reduce fixturing time. When heated to 150°F, RF 5061 (Mod 1) can be handled and machined after 15-20 minutes. voir moins
Request Sample RF 53 Resin Formulators (E.V. Roberts) RF 53 is a bi-cyclic anhydride that offers exceptionally long pot life and very high Tg. It cures into a highly temperature resistant plastic and it used for high temperature filament winding and RTM/VARTM applications. RF 53 requires a suitable accelerat...voir plus RF 53 is a bi-cyclic anhydride that offers exceptionally long pot life and very high Tg. It cures into a highly temperature resistant plastic and it used for high temperature filament winding and RTM/VARTM applications. RF 53 requires a suitable accelerator such as RF 22 or RF 80. voir moins
Request Sample RF 5407 Resin Formulators (E.V. Roberts) RF 5407 is an easy-to-use, aluminum oxide, liquid epoxy resin with excellent electrical insulation properties and high thermal conductivity. RF 5407 can be cured with nearly any hardener to produce a wide range of properties and cure cycles. Several poten...voir plus RF 5407 is an easy-to-use, aluminum oxide, liquid epoxy resin with excellent electrical insulation properties and high thermal conductivity. RF 5407 can be cured with nearly any hardener to produce a wide range of properties and cure cycles. Several potential curing agents are listed below. Regardless of which curing agent is selected, the resultant plastic will have low shrinkage during cure, excellent thermal stability and conductivity, and be a strong and durable casting. voir moins
Request Sample RF 6002 Resin Formulators (E.V. Roberts) RF 6002 is a modified Novolac epoxy resin. It offers improved Tg and chemical resistance versus standard bisphenol A epoxies. RF 6002 has a medium-low viscosity and is suitable for laminating, RTM and filament winding applications. The handling and final ...voir plus RF 6002 is a modified Novolac epoxy resin. It offers improved Tg and chemical resistance versus standard bisphenol A epoxies. RF 6002 has a medium-low viscosity and is suitable for laminating, RTM and filament winding applications. The handling and final cure properties can be adjusted by the choice of curing agent. voir moins
Request Sample RF 61 Resin Formulators (E.V. Roberts) RF 61 is a polyamide curing agent for use with various epoxy resins. This specific curing agent is designed to add toughness and flexibility to cured epoxy resins. It has very good adhesive strength characteristics and will bond with most substrates. Diff...voir plus RF 61 is a polyamide curing agent for use with various epoxy resins. This specific curing agent is designed to add toughness and flexibility to cured epoxy resins. It has very good adhesive strength characteristics and will bond with most substrates. Different mix ratios will impart varying degrees of increasing flexibility to the cured systems. A mix with RF 61 will have at least a one hour pot life under normal conditions. Cure will take place at room temperature or, in small castings or adhesives, can be accelerated with heat. voir moins
Request Sample RF 6100 A/B Kit Resin Formulators (E.V. Roberts) RF 6100 A/B Kit is a medium viscosity, high temperature epoxy adhesive system for bonding metal and composite structures. RF 6100 has an open pot life of four hours and cures in one hour at 200°F.
Request Sample RF 62 Resin Formulators (E.V. Roberts) RF 62 is a standard, high viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 115 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a tough, durabl...voir plus RF 62 is a standard, high viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 115 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a tough, durable, moisture and chemical resistant plastic. RF 62 complies with FDA 21 CFR 175.300 and 21 CFR 175.105. voir moins
Request Sample RF 67 Resin Formulators (E.V. Roberts) RF 67 curing agent is a polyfunctional, fatty amidoamine for use in curing liquid epoxy resins. It is intended as an equivalent “drop-in” for Genamid 2000 and can be used without formulation changes. Special features of this room temperature curing agent ...voir plus RF 67 curing agent is a polyfunctional, fatty amidoamine for use in curing liquid epoxy resins. It is intended as an equivalent “drop-in” for Genamid 2000 and can be used without formulation changes. Special features of this room temperature curing agent include relatively rapid cure rate, and the ability to cure in the presence of moisture. The mix ratio can be varied over a wide range to generate cured products that range from hard and rigid to soft and flexible. Appropriate applications include marine coatings, high-solids and solvent-free coatings, flooring, adhesives and laminates. It is approved for use in U.S. Navy Specification MILP-24441/Ships Coatings. voir moins
Request Sample RF 68 Resin Formulators (E.V. Roberts) RF 68 is a standard, low viscosity, fatty acid amidoamine resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Genamid 250 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a har...voir plus RF 68 is a standard, low viscosity, fatty acid amidoamine resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Genamid 250 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a hard, durable, moisture and chemical resistant plastic. RF 68 is ideally suited for high solids formulations with low viscosity resins. It can be used in compliance with 21 CFR 175.300 and 21 CFR 176.170 as a component of FDA-compliant epoxy coatings, can cements and adhesives. voir moins
Request Sample RF 713 A/B Kit Resin Formulators (E.V. Roberts) RF 713 A/B Kit is a thixotropic epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed to be used where hot solder applications are impractical or on parts which cannot be subjected to heat. RF 713 is...voir plus RF 713 A/B Kit is a thixotropic epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed to be used where hot solder applications are impractical or on parts which cannot be subjected to heat. RF 713 is also effective as a shielding material. voir moins
Request Sample RF 77 Resin Formulators (E.V. Roberts) RF 77 is a low-viscosity amine curing agent for use with liquid epoxy resins that provides rapid cure at ambient and temperatures as low as 32°F (0°C). It can also be used to accelerate other amine hardeners.
Request Sample RF 81 Resin Formulators (E.V. Roberts) RF 81 is a unique low viscosity polyamide hardener. It is compatible with most epoxy resins without induction and offers a shorter gel time than standard polyamide hardeners.
Request Sample RF 825 A/B Resin Formulators (E.V. Roberts) RF 825 A/B is a two component Epoxy compound used for potting electronic packages, generally with vacuum impregnation techniques. It is a high temperature resistant, low out gassing material which has been used in high voltage devices in space.
Request Sample RF 9 Resin Formulators (E.V. Roberts) RF 9 is an accelerated polyamide hardener. It offers better chemical resistance and a higher service temperature than standard polyamides.
Request Sample RF 912 A/B Kit Resin Formulators (E.V. Roberts) RF 912 A/B Kit is a high strength epoxy adhesive system for bonding a wide variety of substrates, including plastics. This product is thixotropic and can be used on vertical surfaces without excessive run out from the bond line. RF 912 has an open working...voir plus RF 912 A/B Kit is a high strength epoxy adhesive system for bonding a wide variety of substrates, including plastics. This product is thixotropic and can be used on vertical surfaces without excessive run out from the bond line. RF 912 has an open working time of 30 to 45 minutes and will cure at room temperature. voir moins
Request Sample RF 913 A/B Resin Formulators (E.V. Roberts) RF 913 A/B is a toughened epoxy adhesive system for bonding a wide variety of substrates. This product is semi-thixotropic, and so can be used on vertical surfaces without excessive bleed from the bond line. RF 913 A/B has excellent adhesion to metal and ...voir plus RF 913 A/B is a toughened epoxy adhesive system for bonding a wide variety of substrates. This product is semi-thixotropic, and so can be used on vertical surfaces without excessive bleed from the bond line. RF 913 A/B has excellent adhesion to metal and plastic substrates as well as excellent water soak and environmental resistance. RF 913 is available in green (blue/yellow) and black. An electrical grade is also available. voir moins
Request Sample RF 955 A/B Resin Formulators (E.V. Roberts) RF 955 A/B is an easy to mix, stiff paste, two-part, high strength, epoxy fairing compound. It is designed to hold up to a 1 inch peak before cure and is easily smoothed to a paintable surface. This high strength material bonds well to a wide variety of s...voir plus RF 955 A/B is an easy to mix, stiff paste, two-part, high strength, epoxy fairing compound. It is designed to hold up to a 1 inch peak before cure and is easily smoothed to a paintable surface. This high strength material bonds well to a wide variety of substrates, including most metals and most rigid plastics. voir moins
Request Sample RF 96 Resin Formulators (E.V. Roberts) RF 96 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins. It also can be used to cure solid resins in solvent-based systems. RF 96 curing agent allows for cures at high humidity, low temperatures to 40 °F and underwa...voir plus RF 96 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins. It also can be used to cure solid resins in solvent-based systems. RF 96 curing agent allows for cures at high humidity, low temperatures to 40 °F and underwater. voir moins
Request Sample RX 5004 A/B Resin Formulators (E.V. Roberts) RX 5004 A/B is fast setting, non-slump, general purpose adhesive for bonding a wide variety of substrates. It has a blue to green color.
Request Sample RX 5004 A/B Kit Resin Formulators (E.V. Roberts) RX 5004 A/B Kit is a fast setting, non-slump, general purpose epoxy adhesive system for bonding a wide variety of substrates. RX 5004 sets in as little as 10 minutes with full cure in 24 hours at room temperature.