UL Prospector

Succès!

Vous avez enregistré votre recherche avec succès
BYK®-012 Byk BYK®-012 is a mineral oil and silicone free defoamer for aqueous VOC-free adhesives and sealants.
BYK®-016 Byk BYK®-016 is a mineral oil and silicone-free defoamer for aqueous adhesives and sealants.
BYK®-022 Byk Silicone defoamer for aqueous adhesives and sealants.
BYK®-023 Byk Silicone defoamer for aqueous adhesives and sealants.
BYK®-024 Byk Silicone defoamer for adhesives and sealants based on aqueous emulsions.
BYK®-025 Byk Silicone defoamer for adhesives and sealants based on aqueous emulsions.
BYK®-028 Byk Silicone defoamer for adhesives and sealants based on aqueous emulsions.
BYK®-035 Byk BYK®-035 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially suitable for emulsion systems with a PVC of 20-40. Its effectiveness is not impaired by high shear forces.
BYK®-037 Byk BYK®-037 is an emulsion of paraffin based mineral oils and hydrophobic components, containing silicone. It is used in all emulsion paints and plasters as well as for defoaming during the dispersion production. BYK-037 is very cost-efficient.
BYK®-038 Byk BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances ex...voir plus BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances excellent efficiency. BYK-038 should be preferably used in emulsion systems with a PVC from 20 to 70. voir moins
BYK®-065 Byk Silicone defoamer for solvent-borne and solvent-free adhesives and sealants. The additive is recommended for PUR systems and can also be used in epoxy systems.
BYK®-066 N Byk Silicone defoamer for solvent-borne and solvent-free adhesives and sealants. The additive is recommended for PUR systems and can also be used in epoxy systems.
BYK®-067 A Byk Silicone defoamer for solvent-borne and solvent-free adhesives and sealants. The additive is recommended for PUR systems and can also be used in epoxy systems.
BYK®-077 Byk BYK®-077 is a solution of a polymethylalkylsiloxane. This product prevents foam and bubble formation arising during paint production and application in non-polar to high polar systems. It does not cause dewetting or defects in intercoat adhesion when reco...voir plus BYK®-077 is a solution of a polymethylalkylsiloxane. This product prevents foam and bubble formation arising during paint production and application in non-polar to high polar systems. It does not cause dewetting or defects in intercoat adhesion when recoated. voir moins
BYK®-085 Byk Silicone defoamer and surface additive for solvent-borne adhesives and sealants. BYK®-085 is the solvent-free version of BYK®-077 and is used especially in systems in which solvent-free additives are requested or where a special solvent requirement exist...voir plus Silicone defoamer and surface additive for solvent-borne adhesives and sealants. BYK®-085 is the solvent-free version of BYK®-077 and is used especially in systems in which solvent-free additives are requested or where a special solvent requirement exists.  voir moins
BYK®-088 Byk Silicone air release additive recommended for PUR-based adhesives. Also suitable for epoxy systems.
BYK®-093 Byk High Persistence Silicone Defoamer for Aqueous Adhesives and Sealants. This defoamer combines high efficiency with broad compatibilty.
BYK®-1610 Byk BYK®-1610 is a defoamer for emulsion-based adhesives and sealants.
BYK®-1615 Byk BYK®-1615 is a defoamer for adhesives and sealants based on aqueous emulsions.
BYK®-3400 Byk BYK®-3400 is a silicone surface additive for aqueous adhesives and sealants. It reduces the surface tension and thus improves subtrate wetting.
BYK®-3410 Byk BYK®-3410 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the surface tension and thus improves subtrate wetting.
BYK®-345 Byk BYK®-345 is a polyether modified siloxane. It is the solvent-free version of BYK-346. These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilizatio...voir plus BYK®-345 is a polyether modified siloxane. It is the solvent-free version of BYK-346. These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilization and they do not impair recoatability. voir moins
BYK®-346 Byk BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the p...voir plus BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the production process. voir moins
BYK®-347 Byk BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-...voir plus BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-345 is recommended. voir moins
BYK®-348 Byk BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage ...voir plus BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage of the production process. voir moins
BYK®-349 Byk BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable...voir plus BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable for water-borne systems based on: styrene acrylic, pure acrylic and acrylic/PU combinations, crosslinkable polyurethanes and baking systems. voir moins
BYK®-410 Byk Liquid rheologoical additive for solvent-based and solvent-free coatings. After incorporation it builds up pseudoplasticity within the system. The thixotropic flow behavior prevents settling and sagging. Due to its liquid form the additive is easy to hand...voir plus Liquid rheologoical additive for solvent-based and solvent-free coatings. After incorporation it builds up pseudoplasticity within the system. The thixotropic flow behavior prevents settling and sagging. Due to its liquid form the additive is easy to handle; it can even be used as a post-additive. The additive requires no special temperature control during incorporation. voir moins
BYK®-411 Byk BYK®-411 is a liquid rheological additive (also for post-addition into solvent-borne and solvent-free systems). It is a solution of a modified urea. These additives are preferably used to adjust rheology in low-polar, solvent-borne and solvent-free system...voir plus BYK®-411 is a liquid rheological additive (also for post-addition into solvent-borne and solvent-free systems). It is a solution of a modified urea. These additives are preferably used to adjust rheology in low-polar, solvent-borne and solvent-free systems. This product creates pseudo-plastic, thixotropic flow behavior in the low shear range, and has accordingly no impact on the overall application behavior of the coating. voir moins
BYK®-420 Byk BYK®-420 is a solution of a modified urea. BYK-420 has proven to be efficient for universal application in aqueous systems and pigment concentrates. As a result of varying regional labeling obligations for NMP (N-Methylpyrrolidone), the additives are avai...voir plus BYK®-420 is a solution of a modified urea. BYK-420 has proven to be efficient for universal application in aqueous systems and pigment concentrates. As a result of varying regional labeling obligations for NMP (N-Methylpyrrolidone), the additives are available alternatively as solutions in NEP (N-Ethylpyrroldione) and DMSO (Dimethylsulfoxide). voir moins
BYK®-425 Byk BYK®-425 is a rheological additive for aqueous and water soluble systems. It is a solution of an urea modified polyurethane. The additive is designed for adjusting the low shear viscosity of aqueous and water soluble resin systems providing pseudoplastic ...voir plus BYK®-425 is a rheological additive for aqueous and water soluble systems. It is a solution of an urea modified polyurethane. The additive is designed for adjusting the low shear viscosity of aqueous and water soluble resin systems providing pseudoplastic flow behavior. Due to its high effectiveness BYK-425 is also suitable to increase in-can viscosity and to adjust flow properties of pigment pastes. The viscosity increase improves the sag resistance. voir moins
BYK®-430 Byk BYK®-430 is a liquid rheology control additive for solvent borne systems. It is a solution of a high molecular urea modified medium polar polyamide. BYK-430 and BYK-431 build a three-dimensional structured network based on hydrogen bondings and interactio...voir plus BYK®-430 is a liquid rheology control additive for solvent borne systems. It is a solution of a high molecular urea modified medium polar polyamide. BYK-430 and BYK-431 build a three-dimensional structured network based on hydrogen bondings and interaction with the pigments and extenders. The resulting pseudoplastic flow characteristic is the result of the entanglement of high molecular weight polymers. The polarity of the coating system as well as the incorporation temperature will have an effect on the final rheology. voir moins
BYK®-431 Byk BYK®-431 is a liquid rheology control additive for solvent-borne systems. It is a solution of a high molecular urea modified non polar polyamide. BYK-430 and BYK-431 build a three-dimensional structured network based on hydrogen bondings and interaction w...voir plus BYK®-431 is a liquid rheology control additive for solvent-borne systems. It is a solution of a high molecular urea modified non polar polyamide. BYK-430 and BYK-431 build a three-dimensional structured network based on hydrogen bondings and interaction with the pigments and extenders. The resulting pseudoplastic flow characteristic is the result of the entanglement of high molecular weight polymers. The polarity of the coating system as well as the incorporation temperature will have an effect on the final rheology. voir moins
BYK®-9076 Byk BYK®-9076 is a high molecular weight additive for solvent-free adhesives and sealants BYK®-9076 is especially useful for the stabilization of acidic and neutral types of carbon black.
BYK®-9077 Byk BYK®-9077 is a wetting and dispersing additive for solvent-free systems and pigment concentrates with high molecular weight. It is a copolymer with pigment affinic groups. This product reduces viscosity and leads to more Newtonian flow behavior in the mil...voir plus BYK®-9077 is a wetting and dispersing additive for solvent-free systems and pigment concentrates with high molecular weight. It is a copolymer with pigment affinic groups. This product reduces viscosity and leads to more Newtonian flow behavior in the mill-base. BYK-9077 is especially suited for stabilizing basic carbon black pigments. The product does not contain plasticizers. voir moins
BYK®-A 515 Byk BYK®-A 515 is a highly surface active air release additive often used in acrylic systems to prevent air entrapment.
BYK®-A 530 Byk Air release agent and defoamer for solvent-based and solvent-free epoxy systems.
BYK®-A 535 Byk Silicone-free defoamer / air release additive for solvent-free and solvent-borne epoxy and PUR-based adhesives and sealants.
BYK®-A 550 Byk BYK®-A 550 shows a strong air release effect without creating a strong haziness effect.
BYK®-A 555 Byk BYK®-A 555 shows the highest efficiency in various adhesive applications.
BYK®-DYNWET 800 Byk BYK®-DYNWET 800 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the dynamic surface tension during fast application processes and thus improves subtrate wetting.
BYK®-W 940 Byk BYK®-W 940 prevents sedimentation of mineral fillers such as calcium carbonate and aluminium trihydroxide and minimizes flooding and floating when organic and inorganic pigments are used.
BYK®-W 961 Byk BYK®-W 961 is used as a wetting and dispersing additive for mineral fillers to prevent sedimentation.
BYK®-W 966 Byk BYK®-W 966 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide in polyester resins. It reduces the viscosity, so that a higher filler loading is possible, and helps to prevent sedimentati...voir plus BYK®-W 966 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide in polyester resins. It reduces the viscosity, so that a higher filler loading is possible, and helps to prevent sedimentation. voir moins
BYK®-W 969 Byk BYK®-W 969 is used as a wetting and dispersing additive with viscosity reducing properties for adhesives and sealants.
BYK®-W 980 Byk BYK®-W 980 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide. It reduces the viscosity, so that a higher filler loading is possible and helps to prevent sedimentation.
BYK®-W 985 Byk BYK®-W 985 improves the wetting and dispersion speed of the most common fillers such as calcium carbonate and aluminium trihydroxide. It dramatically reduces the viscosity so that a higher filler load is possible. BYK®-W 985 usually will not prevent sedim...voir plus BYK®-W 985 improves the wetting and dispersion speed of the most common fillers such as calcium carbonate and aluminium trihydroxide. It dramatically reduces the viscosity so that a higher filler load is possible. BYK®-W 985 usually will not prevent sedimentation. voir moins
Claytone® 40 Byk Claytone® 40 is an organophilic bentonite derivative which is used as thixotropic thickener and anti-settling agent in solvent based coating systems of low to medium polarity. It is a traditional organoclay requiring the addition of an activator to achiev...voir plus Claytone® 40 is an organophilic bentonite derivative which is used as thixotropic thickener and anti-settling agent in solvent based coating systems of low to medium polarity. It is a traditional organoclay requiring the addition of an activator to achieve full efficiency. As organophilic smectite product, it can swell in organic media and build a gel structure (card-house structure). Weak hydrogen bonding between the single smectite platelets is the reason for this thixotropic gel structure. For optimum efficiency the complete separation of the platelets (complete dispersion of agglomerates into primary particles) is necessary. voir moins
Claytone® AF Byk Claytone® AF is a modified montmorillonite designed for use in systems containing aliphatic solvents and aliphatic-aromatic solvent blends that display low to medium polarity. Claytone® AF produces reproducible viscosity and thixotropic development, a hig...voir plus Claytone® AF is a modified montmorillonite designed for use in systems containing aliphatic solvents and aliphatic-aromatic solvent blends that display low to medium polarity. Claytone® AF produces reproducible viscosity and thixotropic development, a high degree of sag control and prevents pigment settling. Claytone® AF is self dispersing and does not require a polar activator. Claytone® AF eliminates the need for high shear or pregels. voir moins
Claytone® APA Byk Claytone® APA is a modified montmorillonite designed for use in systems containing aromatic solvent or aromatic-oxygenated solvent blends that display medium to high polarity. Claytone® APA demonstrates high gelling efficiency, reproducible viscosity and ...voir plus Claytone® APA is a modified montmorillonite designed for use in systems containing aromatic solvent or aromatic-oxygenated solvent blends that display medium to high polarity. Claytone® APA demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. voir moins
Claytone® HT Byk Claytone® HT is a modified montmorillonite designed for use in systems containing aromatic and aliphatic solvents that display low to medium polarity. Claytone® HT demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a...voir plus Claytone® HT is a modified montmorillonite designed for use in systems containing aromatic and aliphatic solvents that display low to medium polarity. Claytone® HT demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. This product is a high performance rheological additive for use in high performance oil based paints and is especially suited to industrial, marine and maintenance coatings. voir moins
Claytone® HY Byk Claytone® HY is a modified montmorillonite designed for use in low to medium polarity printing inks. Claytone® HY demonstrates high gelling efficiency, increases the viscosity and yield value, prevents pigment agglomeration, and settling, reduces misting ...voir plus Claytone® HY is a modified montmorillonite designed for use in low to medium polarity printing inks. Claytone® HY demonstrates high gelling efficiency, increases the viscosity and yield value, prevents pigment agglomeration, and settling, reduces misting and allows the ink manufacturer to control tack viscosity. voir moins
DISPERBYK®-118 Byk DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting an...voir plus DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting and dispersing of all inorganic fillers such as calcium carbonate and aluminum hydroxide (ATH). DISPERBYK®-118 is all-purpose for titanium dioxides. The additive causes lower viscosity and enables higher filler loading. voir moins
DISPERBYK®-180 Byk Wetting and dispersing additive for aqueous, solvent-based and solvent-free adhesives and sealants.
DISPERBYK®-190 Byk Wetting and dispersing additive for aqueous adhesives and sealants.
DISPERBYK®-191 Byk Wetting and dispersing additive for aqueous adhesives and sealants.
DISPERBYK®-192 Byk Wetting and dispersing additive for aqueous adhesives and sealants.
Request Sample Deuteron LE 100 LV Antistatic Agent P.A.T. Products Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing ...voir plus Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems. Deuteron LE 100 LV can be used in many applications including epoxy flooring, PUR-foams (the production of shoe-soles for example), UV or electron-beam curing screen inks to avoid electrostatic charge, and 3D printing. Deuteron LE 100 LV has a cationic character and an extremely high polarity. This allows for considerable reduction in electrical resistance even when using small quatities. voir moins
Request Sample Deuteron MK Matting Agent P.A.T. Products Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...voir plus Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins
Request Sample Deuteron MK-F Matting Agent P.A.T. Products Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...voir plus Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins
Request Sample Deuteron MK-F6 Matting Agent P.A.T. Products Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...voir plus Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins
Request Sample Deuteron MM 659 Matting Agent for UV Systems P.A.T. Products Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...voir plus Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. voir moins
Request Sample Deuteron MM 677 Aqueous Matting Liquid P.A.T. Products Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...voir plus Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. voir moins
Request Sample Deuteron MM 823 Scratch Resistance Additive P.A.T. Products Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...voir plus Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. voir moins
Request Sample Deuteron PMH C Thermoset Matting Agent P.A.T. Products Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...voir plus Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. voir moins
Request Sample Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems P.A.T. Products Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. voir moins
Request Sample Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems P.A.T. Products Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. voir moins
Request Sample Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems P.A.T. Products Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems.  Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. voir moins
GARAMITE® 1210 Byk GARAMITE® 1210 is a unique rheological additive developed for vinyl ester and unsaturated polyester systems. It is recommended for use in unsaturated polyester resins such as Orthophthalic, Isophthalic, DCPD and PET resins. Compared to fumed silica, this ...voir plus GARAMITE® 1210 is a unique rheological additive developed for vinyl ester and unsaturated polyester systems. It is recommended for use in unsaturated polyester resins such as Orthophthalic, Isophthalic, DCPD and PET resins. Compared to fumed silica, this product provides improved sag (drainage) resistance, rheology control and stability, is more efficient, and is easier to handle in manufacturing (less dusty, higher bulk density and not sensitive to shear). voir moins
GARAMITE® 7303 Byk GARAMITE® 7303 was developed using the patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, ty...voir plus GARAMITE® 7303 was developed using the patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, typically requiring both very high shear mixing and a polar activator to help delaminate the aggregates of clay platelets. Due to the multiple particle morphologies of this product, the powder disperses very easily into oils or solvents with only moderate shear. GARAMITE® 7303 exhibits a very unique rheology profile compared to other thickening additives. Very high low-shear viscosity can be achieved by incorporating this product into formulations which results in outstanding ant-settling and anti-syneresis properties. However, when a shear force is applied, the viscosity is quickly reduced which allows for excellent application properties. voir moins
GARAMITE® 7305 Byk GARAMITE® 7305 was developed using patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, typica...voir plus GARAMITE® 7305 was developed using patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, typically requiring both very high shear mixing and a polar activator to help delaminate the aggregates of clay platelets. Due to the multiple particle morphologies of this product, the powder disperses very easily into oils or solvents with only moderate shear. GARAMITE® 7305 exhibits a very unique rheology profile compared to other thickening additives. Very high low-shear viscosity can be achieved by incorporating this product into formulations which results in outstanding ant-settling and anti-syneresis properties. However, when a shear force is applied, the viscosity is quickly reduced which allows for excellent application properties. It is most suited for medium to high polarity systems. voir moins
KTR-100 Suparna Chemicals Ltd. KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins
KTR-118 Suparna Chemicals Ltd. KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins
KTR-123 Suparna Chemicals Ltd. KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins
Laponite® RD Byk Laponite® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used f...voir plus Laponite® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used for imparting a shear sensitive structure to a wide range of waterborne formulations. These include household and industrial surface coatings, cleansers, ceramic glazes, agrochemical, oilfield and horticultural products. voir moins
Laponite® RDS Byk Laponite® RDS is a synthetic layered silicate incorporating an inorganic polyphosphate peptiser. It hydrates and swells in water to give clear and colourless colloidal dispersions of low viscosity known as sols. At 10% concentration in water, these will r...voir plus Laponite® RDS is a synthetic layered silicate incorporating an inorganic polyphosphate peptiser. It hydrates and swells in water to give clear and colourless colloidal dispersions of low viscosity known as sols. At 10% concentration in water, these will remain free flowing for 24 hours. On addition of small quantities of electrolyte, highly thixotropic gels are formed rapidly. This product is used to impart a shear sensitive structure to a wide range of waterborne formulations including household and industrial surface coatings, cleansers, agrochemical and horticultural products. voir moins
Laponite® S482 Byk Laponite® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remai...voir plus Laponite® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remain free flowing for up to 1 year. On addition of small quantities of electrolyte, or on addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products. voir moins
Laponite® SL25 Byk Laponite® SL25 is a ready-for-use liquid dispersion of synthetic layered silicate modified with a patented dispersing agent. Supplied at 25% solids content in water, Laponite® SL25 is a translucent and colourless low viscosity liquid dispersion. On additi...voir plus Laponite® SL25 is a ready-for-use liquid dispersion of synthetic layered silicate modified with a patented dispersing agent. Supplied at 25% solids content in water, Laponite® SL25 is a translucent and colourless low viscosity liquid dispersion. On addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products. voir moins
NANOBYK®-3620 Byk NANOBYK®-3620 is a VOC-free, aqueous dispersion made up of nanohybrid particles to protect glossy, aqueous, pigmented and unpigmented top-coats against scratching and abrasion. This protective property comes into effect quickly after only a brief drying p...voir plus NANOBYK®-3620 is a VOC-free, aqueous dispersion made up of nanohybrid particles to protect glossy, aqueous, pigmented and unpigmented top-coats against scratching and abrasion. This protective property comes into effect quickly after only a brief drying period. NANOBYK® 3620 has no negative influences on the gloss and transparency, and is therefore particularly suitable for clear coats. voir moins
OPTIBENT® 1056 Byk OPTIBENT® 1056 is a high-quality, carefully selected and activated layered silicate product and has been developed for cementitious tile adhesives and base coats (renders). Due to its excellent thixotropic properties, sag resistance and workability proper...voir plus OPTIBENT® 1056 is a high-quality, carefully selected and activated layered silicate product and has been developed for cementitious tile adhesives and base coats (renders). Due to its excellent thixotropic properties, sag resistance and workability properties can be improved. This product is used for dry mix mortars and adhesives voir moins
OPTIBENT® 602 Byk OPTIBENT® 602 is a high-quality, activated layered silicate product which creates special properties in mineral binding wall plasters and in hydraulically hardening tile adhesives due to its additional organic modification.
OPTIBENT® 6027 Byk OPTIBENT® 6027 is natural untreated phylosilicate suitable to adjust the rheological properties of dry mix mortars, particularly cementitious tile adhesives according to C1-standard and other economic dry mix mortar applications.
OPTIBENT® 6042 Byk OPTIBENT® 6042 is a natural occurring rheology modifier based on phyllosilicates providing softer consistency, improved sag control and open time with no negative impact on setting time. OPTIBENT 6042 is effective in mineral based adhesives, particularly ...voir plus OPTIBENT® 6042 is a natural occurring rheology modifier based on phyllosilicates providing softer consistency, improved sag control and open time with no negative impact on setting time. OPTIBENT 6042 is effective in mineral based adhesives, particularly in cementitious, fast setting and mid-set adhesives. OPTIBENT® 6042 is suitable in cementitious construction application allowing a balance of other organic thickeners such as water retention aids. voir moins
OPTIBENT® 987 Byk OPTIBENT® 987 is a carefully selected, activated layered silicate product that has been developed for dry pre-mixed mortars and emulsion based systems. It shows a marked thixotropic effect and incorporates a yield value into the system.
OPTIFLO® H6500 VF Byk OPTIFLO® H6500 VF is an aqueous solution of a hydrophobically modified nonionic polymer commonly called an associative thickener. It is VOC-free and APEO free. The use of this product will increase low shear rheology, such as Stormer viscosity as well as ...voir plus OPTIFLO® H6500 VF is an aqueous solution of a hydrophobically modified nonionic polymer commonly called an associative thickener. It is VOC-free and APEO free. The use of this product will increase low shear rheology, such as Stormer viscosity as well as improved sag control and some high shear or ICI viscosity. voir moins
OPTIFLO® H7500 VF Byk OPTIFLO® H7500 VF is a HEUR based nonionic associative thickener which is designed for use as a thickener in waterborne paints and coatings. It is mainly used to generate KU or mid-shear viscosity to yield package viscosity and sag control in difficult to...voir plus OPTIFLO® H7500 VF is a HEUR based nonionic associative thickener which is designed for use as a thickener in waterborne paints and coatings. It is mainly used to generate KU or mid-shear viscosity to yield package viscosity and sag control in difficult to thicken systems such as VAE, VaVEOVA and vinyl acrylic latex systems. It can be used at lower use levels than typical HEUR based polymers due to the strong interaction with these low VOC binders such as VAE systems. This product is up to 25% more efficient than conventional systems. Common applications include waterborne paints and coating, industrial coatings, waterborne adhesives, emulsion based adhesives, roof coatings, mastics, and sealing compounds. voir moins
OPTIGEL® CK Byk OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This produc...voir plus OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This product has applications in areas such as emulsion paints and plasters, dip coatings, primers, sealants and putties, ceramic frits and compounds, welding rods, foundry washes, cleaners and polishes, adhesives, bitumen emulsions, water reducible systems, and oil-in-water emulsions. voir moins
OPTIGEL® LX Byk OPTIGEL® LX is a modified bentonite which has been specially developed as a thickening agent for aqueous systems. It is an effective thixotropic thickener. This product is specially designed for use in latex emulsion systems and should not be used in wat...voir plus OPTIGEL® LX is a modified bentonite which has been specially developed as a thickening agent for aqueous systems. It is an effective thixotropic thickener. This product is specially designed for use in latex emulsion systems and should not be used in water reducible (cosolvent) systems. It can be used alone or in combination with cellulosic materials to improve pigment suspension and to impart dripless application properties. voir moins
OPTIGEL® WA Byk OPTIGEL® WA, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. It has a neutral pH-value and is particularly effective in neutral and alkaline systems. This produc...voir plus OPTIGEL® WA, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. It has a neutral pH-value and is particularly effective in neutral and alkaline systems. This product prevents the settling of heavy pigments or fillers, inhibits sagging, and allows the application of thick coatings. voir moins
OPTIGEL® WM Byk OPTIGEL® WM is an organically modified bentonite which has been specially developed as a thickening agent for aqueous systems. Due to its high thixotropy, it is particularly suited for improving consistency and stability of emulsion paints. Although the p...voir plus OPTIGEL® WM is an organically modified bentonite which has been specially developed as a thickening agent for aqueous systems. Due to its high thixotropy, it is particularly suited for improving consistency and stability of emulsion paints. Although the powder is slightly tinted, it is easy to incorporate and has no influence on the colour of the pigments added. voir moins
Optiflo® H3300 VF Byk Optiflo® H3300 VF is a VOC-free polymer solution used to generate low shear viscosity. It is an aqueous solution of a hydrophobically modified nonionic polymer commonly called an associative thickener. The use of Optiflo® H3300 VF will increase body by ge...voir plus Optiflo® H3300 VF is a VOC-free polymer solution used to generate low shear viscosity. It is an aqueous solution of a hydrophobically modified nonionic polymer commonly called an associative thickener. The use of Optiflo® H3300 VF will increase body by generating low shear viscosity with some impact on high shear viscosity. voir moins
Optigel® W724 Byk Optigel® W724 is an organically modified smectite product, which specially has been developed as a thickening agent for aqueous systems. Optigel® W724 used in emulsion paints incorporates a marked thixotropic thickening effect and a yield value into the s...voir plus Optigel® W724 is an organically modified smectite product, which specially has been developed as a thickening agent for aqueous systems. Optigel® W724 used in emulsion paints incorporates a marked thixotropic thickening effect and a yield value into the system which improves application and stability. This product is in the form of a fine, creamy white powder with a pH-value (2% suspension) of 9-11. voir moins
Optigel® WX Byk Optigel® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral a...voir plus Optigel® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. This product has applications in emulsion paints, release coatings, silicate paints, paint strippers, water reducible paints, liquid cleaners, inks, grinding pastes and abrasives, and car undercoatings. voir moins
Request Sample ProFlex 4 P.A.T. Products ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylo...voir plus ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylon-11 and Nylon-12. The addition of this plasticizer contributes to, improved mold release, improved machining, better finish, reduced water absorption, improved shape stability, and heat stability to 80 °C (176 °F). ProFlex 4 can be injected during the hot compounding process of polyamide without generating fumes or deposits in the vacuum hoses. Applications include packaging, A/C hoses, filaments, lubrication hoses, air brake tubing, and vacuum / hydraulic tubing. voir moins
Request Sample ProFlex 8 P.A.T. Products ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes ny...voir plus ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes nylon, other polyamides, shellac, cellulose acetate, and protein materials. It is outstanding for making compounds resistant to oils, solvents, and greases. Because of its low solubility in petroleum hydrocarbons, ProFlex 8 may be used to produce grease and oil-resistant coatings and adhesives. Nitrocellulose lacquers resistant to grease and aliphatic hydrocarbons may be made by combining ProFlex 8 with ProFlex MH (a sulfonamide-formaldehyde resin). In nylon and other polyamides, ProFlex 8 aids processing by lowering the melting point and improving low temperature flexibility. Cellulose acetate plasticized with ProFlex 8 has a brilliance an polish not obtained with other plasticizers, and sheets and films obtain high tensile strength, elongation and flexibility. Polyvinyl acetate adhesives plasticized with ProFlex 8 show exceptional grease resistance and have a quick tack and adhesion for joining difficult surfaces such as rubber to metal. ProFlex 8 is an excellent dye solvent and pigment dispersant. voir moins
Request Sample ProFlex 9S P.A.T. Products ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts ...voir plus ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts improved impact resistance, reduced shrinkage and wrap of the hardened laminate. ProFlex 9S can also be used in low pressure melamine formaldehyde laminates, urea formaldehyde resins, and as reactive plasticizer in epoxy, polyurethane, and melamine based resins. In addition, systems reacted with ProFlex 9S show improved resistance to oils, solvents, and moisture. ProFlex 9S has good UV and thermal stability. In coatings it imparts fungicidal activity. Applications include melamine based laminates, melamine based coatings, melamine/urea formaldehyde wood adhesives, phenol/resorcinol formaldehyde wood adhesives, epoxy coating and adhesives, polyurethane coating and adhesives, raw material for fluorescent pigments, and brightening agent for metal plating. voir moins
Request Sample ProFlex MS 80 P.A.T. Products ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nit...voir plus ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nitrocellulose based nail lacquers. ProFlex MS 80 has the advantage that it can be easily poured into formulation during the production process. ProFlex MS 80 imparts improved adhesion and wear properties and generally provides the lacquer system with a shiny glossy appearance. ProFlex MS 80 can also be used as plasticizing resin in solvent borne coating and ink formulations. In these applications ProFlex MS 80 acts as a non-migratory plasticizing co-resin improving the adhesion and gloss of the system. Applications include nail lacquers, nitrocellulose coatings, cellulose acetate formulations, and printing inks. voir moins
TIXOGEL® MPZ Byk TIXOGEL® MPZ is a product of the Maximum Performance organoclay series. It is a highly efficient thixotropic thickener and anti-settling agent which is used in systems of medium to high polarity. The addition of an activator is not necessary in high polar...voir plus TIXOGEL® MPZ is a product of the Maximum Performance organoclay series. It is a highly efficient thixotropic thickener and anti-settling agent which is used in systems of medium to high polarity. The addition of an activator is not necessary in high polar systems as a rule, but is beneficial in systems with medium polarity. voir moins
TIXOGEL® VP Byk TIXOGEL® VP is a thixotropic and anti-settling agent for systems of low to medium polarity. To achieve optimum efficiency, TIXOGEL® VP should be dispersed using high shear forces.
VISCOSEAL R Byk VISCOSEAL R provides effective sag and slump control over a wide temperature range, as encountered in such applications as thick film baking and plastisol fusion. It is suggested for use in caulking, sealants, vinyl plastisols, and other thick film coatin...voir plus VISCOSEAL R provides effective sag and slump control over a wide temperature range, as encountered in such applications as thick film baking and plastisol fusion. It is suggested for use in caulking, sealants, vinyl plastisols, and other thick film coatings. This product is also suitable for use in Rule 66 Mineral Spirits, VM&P Naphtha, Hi-Flash Naphtha, Toluene, Xylene, and mixtures of aliphatic and/or aromatic solvents. voir moins