| Acclaim® 8200 | Covestro | Acclaim® 8200 polyol is a 8,000-molecular-weight diol based on propylene oxide. This high-performance, low- monol polyether is prepared with Bayer’s proprietary IMPACT® technology, using a patented organo-metallic propoxylation catalyst. It may be use...voir plus Acclaim® 8200 polyol is a 8,000-molecular-weight diol based on propylene oxide. This high-performance, low- monol polyether is prepared with Bayer’s proprietary IMPACT® technology, using a patented organo-metallic propoxylation catalyst. It may be used in polyurethane and other applications, including cast elastomers, sealants, epoxy flexibilizers, defoamers, lubricants, crude oil de-emulsifiers, and plasticizers. As with any product, the use of Acclaim 8200 polyol in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins | |
| Acclaim® Polyol 4200 | Covestro | Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur in the formulation of solvent-free or low-solvent polyurethanes. It is suitable for combination with many Desmodur® products in the formulation of solvent-free elast...voir plus Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur in the formulation of solvent-free or low-solvent polyurethanes. It is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. Acclaim® Polyol 4200 can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water). voir moins | |
| Baybond® PU 130 | Covestro | Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers u...voir plus Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide. Glass fiber sizes based on Baybond® PU 130 have excellent filmforming properties and adhesion. This product also exhibits very good colorfastness at high temperatures and is also highly resistant to hydrolysis. Full mechanical properties of Baybond® PU 130 are developed by post-crosslinking for 20 minutes @ 170C. As with any product, use of Baybond® PU 130 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins | |
| Baybond® PU 330 | Covestro | Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. G...voir plus Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. Glass fiber sizes based on Baybond® PU 330 have excellent filmforming properties and adhesion. This product also remains stable when exposed to shear forces. As with any product, use of Baybond® PU 330 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins | |
| Baybond® PU 401 A | Covestro | Baybond® PU 401 A has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. Commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on its polyurethane dispersion have ex...voir plus Baybond® PU 401 A has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. Commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on its polyurethane dispersion have excellent film-forming properties and very good adhesion. As with any product, use of Baybond® PU 401 A polyurethane dispersion in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins | |
| Baybond® PU 402 A | Covestro | Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based o...voir plus Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 402 A are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. Baybond® PU 402 A is also very stable against shear forces. As with any product, use of Baybond® PU 402 A in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability voir moins | |
| Baybond® PU 403 | Covestro | Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond...voir plus Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond PU® 403 have excellent film-forming properties, and very good adhesion. The mechanical properties of Baybond® PU 403 are improved by post-curing at 150ºC or above for 30 minutes. As with any product, Baybond® PU 403 polyurethane dispersion in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins | |
| Baybond® PU 405 | Covestro | Baybond® PU 405 has anionic/non-ionic cross linking polyether urethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers us...voir plus Baybond® PU 405 has anionic/non-ionic cross linking polyether urethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide. Glass fiber sizes based on Baybond® PU 405 have excellent filmforming properties, adhesion and colorfastness. This product is also highly resistant to the effects of shear forces and hydrolysis. Full mechanical properties of Baybond® PU 405 are developed by post-crosslinking for 20 minutes @ 170°C. As with any product, use of Baybond® PU 405 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins | |
| Baybond® PU 406 | Covestro | Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing. It is also useful for the sizing of glass fibers used to reinforce thermop...voir plus Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing. It is also useful for the sizing of glass fibers used to reinforce thermoplastics and has excellent film-forming properties and adhesion. Baybond® PU 406 also remains stable when exposed to shear forces. As with any product, use of Baybond® PU 406 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins | |
| Baybond® XL 825 | Covestro | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 5...voir plus Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. voir moins | |
| Baybond® XP 2728 | Covestro | Baybond® XP 2728 is a anionic/non-ionic polycarbonate-polyether urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber...voir plus Baybond® XP 2728 is a anionic/non-ionic polycarbonate-polyether urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XP 2728 are characterized by their outstanding film-forming properties and very good adhesion. Baybond® XP 2728 exhibits outstanding hydrolysis resistance and colorfastness, and is also very stable against shear forces. As with any product, use of Baybond® XP 2728 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins | |
| Bayhydrol® A 242 | Covestro | Bayhydrol® A 242 is a polyacrylic resin used as a coreactant for Bayhydur® and Desmodur® N polyisocyanates in the formulation of aqueous two component polyurethane systems for various applications by brush, roller or spray. | |
| Bayhydrol® HD 2016 | Covestro | Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with othe...voir plus Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with other water-reducible binders. voir moins | |
| Bayhydrol® HD 2017 | Covestro | Bayhydrol® HD 2017 is a hydroxyl-functional acrylic resin dispersed in water with approximately 1% co-solvent. It can be used as a coreactant for Bayhydur® water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. | |
| Bayhydrol® PR 435 | Covestro | Bayhydrol® PR 435 is an aqueous aliphatic polyurethane dispersion that contains only 5% by weight of organic cosolvent. | |
| Bayhydrol® UV 2280 | Covestro | Bayhydrol® UV 2280 is a urethane acrylate dispersion. It is supplied as approximately 39% solids dispersion in water. It may be used in the formulation of aqueous UV-curing coatings, especially for applica- tion on wood/wood materials. Generally speaking,...voir plus Bayhydrol® UV 2280 is a urethane acrylate dispersion. It is supplied as approximately 39% solids dispersion in water. It may be used in the formulation of aqueous UV-curing coatings, especially for applica- tion on wood/wood materials. Generally speaking, the coated surfaces can be sanded before UV curing. Additions of 1.0 to 2.5% by weight photoinitiator, calculated on the solid binder, have proved suitable for initiating the curing reaction. voir moins | |
| Bayhydur® 304 | Covestro | Bayhydur® 304 is a hydrophilically modified, aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is primarily used as the crosslinker for aqueous polyol binders (Bayhydrol). | |
| Bayhydur® 305 | Covestro | Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by shaking or manual stirring is ...voir plus Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by shaking or manual stirring is a key requirement. voir moins | |
| Bayhydur® 401-70 | Covestro | Bayhydur® 401-70 is a water-dispersible polyisocyanate based on Isophorone Diisocyanate (IPDI) and dissolved in 1-methoxypropylacetate-2/xylene, 1:1. It is mainly used as the co-reactant for aqueous polyol binders from the Bayhydrol range. | |
| Bayhydur® BL XP 2706 | Covestro | Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water...voir plus Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast, one-component polyurethane baking coatings. It is also used as an additive in waterborne baking systems to improve hardness, impact strength, chemical resistance and adhesion. voir moins | |
| Bayhydur® XP 2487/1 | Covestro | Bayhydur® XP 2487/1 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. | |
| Bayhydur® XP 2547 | Covestro | Bayhydur® XP 2547 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. Suitable coreactants are hydroxyl-functional waterborne resins s...voir plus Bayhydur® XP 2547 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. Suitable coreactants are hydroxyl-functional waterborne resins such as Bayhydrol® XP 2542. voir moins | |
| Bayhydur® XP 2655 | Covestro | Bayhydur® XP 2655 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is used as a hardener for waterborne two-component polyurethane systems and a crosslinking agent for waterborne systems from which reliable incorpora...voir plus Bayhydur® XP 2655 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is used as a hardener for waterborne two-component polyurethane systems and a crosslinking agent for waterborne systems from which reliable incorporation and high chemical resistances are required. voir moins | |
| Bayhydur® XP 2700 | Covestro | Bayhydur® XP 2700 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Form supplied is approximately 65% in dipropylene glycol dimethyl ether. It is a crosslinker for aqueous coatings, developed specially for trade applica...voir plus Bayhydur® XP 2700 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Form supplied is approximately 65% in dipropylene glycol dimethyl ether. It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by manual stirring is a key requirement. voir moins | |
| Bayhytherm® 3146 | Covestro | Bayhytherm® 3146 is a water-reducible, aliphatic, self-crosslinking stoving urethane resin used as binder for waterborne, one-component stoving polyurethane systems. | |
| Baymedix® AP501 | Covestro | Baymedix® AP501 is an aliphatic NCO-terminated prepolymer based on hexamethylene diisocyanate. | |
| Baymedix® AR602 | Covestro | Baymedix® AR602 is a polyether polyol based on a tetra-functional starter molecule. | |
| Baymedix® CD102 | Covestro | Baymedix® CD102 is an aqueous polyurethane dispersion. | |
| Baymedix® CD104 | Covestro | Baymedix® CD104 is an aqueous polyurethane dispersion. | |
| Baymedix® FD103 | Covestro | Baymedix® FD103 is an aqueous polyurethane dispersion. | |
| Baymedix® FP503 | Covestro | Baymedix® FP503 is an aliphatic, hydrophilic NCO prepolymer blend based on hexamethylene diisocyanate (HDI). | |
| BYK®-012 | BYK | BYK®-012 is a mineral oil and silicone free defoamer for aqueous VOC-free adhesives and sealants. | |
| BYK®-016 | BYK | BYK®-016 is a mineral oil and silicone-free defoamer for aqueous adhesives and sealants. | |
| BYK®-022 | BYK | Silicone defoamer for aqueous adhesives and sealants. | |
| BYK®-023 | BYK | Silicone defoamer for aqueous adhesives and sealants. | |
| BYK®-024 | BYK | Silicone defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK®-025 | BYK | Silicone defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK®-028 | BYK | Silicone defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK®-035 | BYK | BYK®-035 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially suitable for emulsion systems with a PVC of 20-40. Its effectiveness is not impaired by high shear forces. | |
| BYK®-037 | BYK | BYK®-037 is an emulsion of paraffin based mineral oils and hydrophobic components, containing silicone. It is used in all emulsion paints and plasters as well as for defoaming during the dispersion production. BYK-037 is very cost-efficient. | |
| BYK®-038 | BYK | BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances ex...voir plus BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances excellent efficiency. BYK-038 should be preferably used in emulsion systems with a PVC from 20 to 70. voir moins | |
| BYK®-077 | BYK | BYK®-077 is a solution of a polymethylalkylsiloxane. This product prevents foam and bubble formation arising during paint production and application in non-polar to high polar systems. It does not cause dewetting or defects in intercoat adhesion when reco...voir plus BYK®-077 is a solution of a polymethylalkylsiloxane. This product prevents foam and bubble formation arising during paint production and application in non-polar to high polar systems. It does not cause dewetting or defects in intercoat adhesion when recoated. voir moins | |
| BYK®-085 | BYK | Silicone defoamer and surface additive for solvent-borne adhesives and sealants. BYK®-085 is the solvent-free version of BYK®-077 and is used especially in systems in which solvent-free additives are requested or where a special solvent requirement exist...voir plus Silicone defoamer and surface additive for solvent-borne adhesives and sealants. BYK®-085 is the solvent-free version of BYK®-077 and is used especially in systems in which solvent-free additives are requested or where a special solvent requirement exists. voir moins | |
| BYK®-088 | BYK | Silicone air release additive recommended for PUR-based adhesives. Also suitable for epoxy systems. | |
| BYK®-093 | BYK | High Persistence Silicone Defoamer for Aqueous Adhesives and Sealants. This defoamer combines high efficiency with broad compatibilty. | |
| BYK®-1610 | BYK | BYK®-1610 is a defoamer for emulsion-based adhesives and sealants. | |
| BYK®-1615 | BYK | BYK®-1615 is a defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK-1641 | BYK | BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio. | |
| BYK-1642 | BYK | BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage. | |
| BYK-1745 | BYK | BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings. | |
| BYK®-1760 | BYK | BYK®-1760 is an emission-free silicone and polymer-containing defoamer and air release agent for solvent-borne and solvent-free coatings, adhesives, sealants and casting resins. Particularly recommended for epoxy resin systems. | |
| BYK®-3400 | BYK | BYK®-3400 is a silicone surface additive for aqueous adhesives and sealants. It reduces the surface tension and thus improves subtrate wetting. | |
| BYK®-3410 | BYK | BYK®-3410 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the surface tension and thus improves subtrate wetting. | |
| BYK®-345 | BYK | BYK®-345 is a polyether modified siloxane. It is the solvent-free version of BYK-346. These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilizatio...voir plus BYK®-345 is a polyether modified siloxane. It is the solvent-free version of BYK-346. These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilization and they do not impair recoatability. voir moins | |
| BYK®-346 | BYK | BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the p...voir plus BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the production process. voir moins | |
| BYK®-347 | BYK | BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-...voir plus BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-345 is recommended. voir moins | |
| BYK®-348 | BYK | BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage ...voir plus BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage of the production process. voir moins | |
| BYK®-349 | BYK | BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable...voir plus BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable for water-borne systems based on: styrene acrylic, pure acrylic and acrylic/PU combinations, crosslinkable polyurethanes and baking systems. voir moins | |
| BYK®-9076 | BYK | BYK®-9076 is a high molecular weight additive for solvent-free adhesives and sealants BYK®-9076 is especially useful for the stabilization of acidic and neutral types of carbon black. | |
| BYK®-9077 | BYK | BYK®-9077 is a wetting and dispersing additive for solvent-free systems and pigment concentrates with high molecular weight. It is a copolymer with pigment affinic groups. This product reduces viscosity and leads to more Newtonian flow behavior in the mil...voir plus BYK®-9077 is a wetting and dispersing additive for solvent-free systems and pigment concentrates with high molecular weight. It is a copolymer with pigment affinic groups. This product reduces viscosity and leads to more Newtonian flow behavior in the mill-base. BYK-9077 is especially suited for stabilizing basic carbon black pigments. The product does not contain plasticizers. voir moins | |
| BYK®-A 530 | BYK | Air release agent and defoamer for solvent-based and solvent-free epoxy systems. | |
| BYK®-A 535 | BYK | Silicone-free defoamer / air release additive for solvent-free and solvent-borne epoxy and PUR-based adhesives and sealants. | |
| BYK®-A 550 | BYK | BYK®-A 550 shows a strong air release effect without creating a strong haziness effect. | |
| BYK®-A 555 | BYK | BYK®-A 555 shows the highest efficiency in various adhesive applications. | |
| BYK®-DYNWET 800 | BYK | BYK®-DYNWET 800 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the dynamic surface tension during fast application processes and thus improves subtrate wetting. | |
| BYK®-W 940 | BYK | BYK®-W 940 prevents sedimentation of mineral fillers such as calcium carbonate and aluminium trihydroxide and minimizes flooding and floating when organic and inorganic pigments are used. | |
| BYK®-W 961 | BYK | BYK®-W 961 is used as a wetting and dispersing additive for mineral fillers to prevent sedimentation. | |
| BYK®-W 966 | BYK | BYK®-W 966 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide in polyester resins. It reduces the viscosity, so that a higher filler loading is possible, and helps to prevent sedimentati...voir plus BYK®-W 966 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide in polyester resins. It reduces the viscosity, so that a higher filler loading is possible, and helps to prevent sedimentation. voir moins | |
| BYK®-W 969 | BYK | BYK®-W 969 is used as a wetting and dispersing additive with viscosity reducing properties for adhesives and sealants. | |
| BYK®-W 980 | BYK | BYK®-W 980 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide. It reduces the viscosity, so that a higher filler loading is possible and helps to prevent sedimentation. | |
| BYK®-W 985 | BYK | BYK®-W 985 improves the wetting and dispersion speed of the most common fillers such as calcium carbonate and aluminium trihydroxide. It dramatically reduces the viscosity so that a higher filler load is possible. BYK®-W 985 usually will not prevent sedim...voir plus BYK®-W 985 improves the wetting and dispersion speed of the most common fillers such as calcium carbonate and aluminium trihydroxide. It dramatically reduces the viscosity so that a higher filler load is possible. BYK®-W 985 usually will not prevent sedimentation. voir moins | |
| CLAYTONE 34 | BYK | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotrop...voir plus CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. voir moins | |
| CLAYTONE® 40 | BYK | CLAYTONE® 40 is an organophilic bentonite derivative which is used as thixotropic thickener and anti-settling agent in solvent based coating systems of low to medium polarity. It is a traditional organoclay requiring the addition of an activator to achiev...voir plus CLAYTONE® 40 is an organophilic bentonite derivative which is used as thixotropic thickener and anti-settling agent in solvent based coating systems of low to medium polarity. It is a traditional organoclay requiring the addition of an activator to achieve full efficiency. As organophilic smectite product, it can swell in organic media and build a gel structure (card-house structure). Weak hydrogen bonding between the single smectite platelets is the reason for this thixotropic gel structure. For optimum efficiency the complete separation of the platelets (complete dispersion of agglomerates into primary particles) is necessary. voir moins | |
| CLAYTONE® AF | BYK | CLAYTONE® AF is a modified montmorillonite designed for use in systems containing aliphatic solvents and aliphatic-aromatic solvent blends that display low to medium polarity. CLAYTONE® AF produces reproducible viscosity and thixotropic development, a hig...voir plus CLAYTONE® AF is a modified montmorillonite designed for use in systems containing aliphatic solvents and aliphatic-aromatic solvent blends that display low to medium polarity. CLAYTONE® AF produces reproducible viscosity and thixotropic development, a high degree of sag control and prevents pigment settling. CLAYTONE® AF is self dispersing and does not require a polar activator. CLAYTONE® AF eliminates the need for high shear or pregels. voir moins | |
| CLAYTONE® APA | BYK | CLAYTONE® APA is a modified montmorillonite designed for use in systems containing aromatic solvent or aromatic-oxygenated solvent blends that display medium to high polarity. CLAYTONE® APA demonstrates high gelling efficiency, reproducible viscosity and ...voir plus CLAYTONE® APA is a modified montmorillonite designed for use in systems containing aromatic solvent or aromatic-oxygenated solvent blends that display medium to high polarity. CLAYTONE® APA demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. voir moins | |
| CLAYTONE® HT | BYK | CLAYTONE® HT is a modified montmorillonite designed for use in systems containing aromatic and aliphatic solvents that display low to medium polarity. CLAYTONE® HT demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a...voir plus CLAYTONE® HT is a modified montmorillonite designed for use in systems containing aromatic and aliphatic solvents that display low to medium polarity. CLAYTONE® HT demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. This product is a high performance rheological additive for use in high performance oil based paints and is especially suited to industrial, marine and maintenance coatings. voir moins | |
| CLAYTONE® HY | BYK | CLAYTONE® HY is a modified montmorillonite designed for use in low to medium polarity printing inks. CLAYTONE® HY demonstrates high gelling efficiency, increases the viscosity and yield value, prevents pigment agglomeration, and settling, reduces misting ...voir plus CLAYTONE® HY is a modified montmorillonite designed for use in low to medium polarity printing inks. CLAYTONE® HY demonstrates high gelling efficiency, increases the viscosity and yield value, prevents pigment agglomeration, and settling, reduces misting and allows the ink manufacturer to control tack viscosity. voir moins | |
| CLAYTONE-3 | BYK | CLAYTONE-3 is an cconomy rheological additive suitable for use in diesel, clean mineral oil and synthetic olefin-based drilling fluids to increase the carrying capacity and hole cleaning capabilities. | |
| CLAYTONE-40 | BYK | CLAYTONE-40 is a rheology additive in powder form based on an organophilic phyllosilicate for non-polar to medium-polar systems to create a thixotropic flow behavior. | |
| CLAYTONE-EM | BYK | CLAYTONE-EM is a high efficiency rheological additive suitable for use in synthetic base fluids and all-oil systems to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-ER | BYK | CLAYTONE-ER is a high efficiency rheological additive suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-IMG 400 | BYK | CLAYTONE-IMG 400 is a general purpose rheological additive for diesel and mineral oil based drilling fluids to increase the carrying capacity and hole cleaning capabilities. | |
| CLAYTONE-MPZ | BYK | CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally su...voir plus CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. CLAYTONE-MPZ performs especially well in systems containing aromatic solvents, alcohols, glycols, ketones and esters. CLAYTONE-MPZ is the best solution particularly in epoxy systems or zinc (shop) primers, where high sag resistance or anti-settling performance is required. In comparison to other clays (e.g. Hectorite-based clays) CLAYTONE-MPZ outperforms these products in performance and ease of dispersion. voir moins | |
| CLAYTONE-SF | BYK | CLAYTONE-SF is an ultra high efficiency rheological suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-VP V | BYK | CLAYTONE-VP V is a powdered rheology additive based on an organophilic phyllosilicate for non-polar to medium-polar systems to produce a thixotropic flow behavior. | |
| Desmodur® BL 1100/1 | Covestro | Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI, supplied as solvent-free. It is combined with cycloaliphatic diamines to formulate highly flexible, one-component stoving coatings, including those for application by dipping and curta...voir plus Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI, supplied as solvent-free. It is combined with cycloaliphatic diamines to formulate highly flexible, one-component stoving coatings, including those for application by dipping and curtain coating and adhesive cements. voir moins | |
| Desmodur® BL 3272 MPA | Covestro | Desmodur® BL 3272 MPA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It was developed as a hardener for lightfast one-pack baking polyurethane coatings w...voir plus Desmodur® BL 3272 MPA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It was developed as a hardener for lightfast one-pack baking polyurethane coatings whose baking temperature can be reduced by the addition of a catalyst, e.g. 0.3 - 1.0 % DBTL, without influencing the storage stability of the ready-to-use formulation. voir moins | |
| Desmodur® BL 3370 MPA | Covestro | Desmodur® BL 3370 PMA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It is used with hydroxyl functional coreactants in the formulation of light-stable o...voir plus Desmodur® BL 3370 PMA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It is used with hydroxyl functional coreactants in the formulation of light-stable one-component baking systems with relatively low curing temperatures. Coatings based on Desmodur® BL 3370 MPA are used for the industrial finishing of appliances, coil coating, can coating, and in the automotive industry for chip-resistant primer-surfacers and topcoats. voir moins | |
| Desmodur® BL 3475 BA/SN | Covestro | Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack bakin...voir plus Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack baking polyurethane coatings with a low baking temperature. Used in the formulation of high-quality industrial coatings, especially for cans and tubes. The product can also be used as an additive to improve the reactivity, flexibility and adhesion of conventional baking systems. voir moins | |
| Desmodur® BL 4265 SN | Covestro | Desmodur® BL 4265 SN is a blocked aliphatic polyisocyanate based on isophorone diisocyanate (IPDI) and dissolved in aromatic 100. It is used with hydroxyl-functional coreactants in the formulation of light-stable one-component baking systems with relative...voir plus Desmodur® BL 4265 SN is a blocked aliphatic polyisocyanate based on isophorone diisocyanate (IPDI) and dissolved in aromatic 100. It is used with hydroxyl-functional coreactants in the formulation of light-stable one-component baking systems with relatively low curing temperatures. Coatings based on Desmodur® BL 4265 SN blocked polyisocyanate are used for the industrial finishing of appliances, coil coating, and can coating, and in the automotive industry for chip-resistant primer-surfacers and topcoats. voir moins | |
| Desmodur® BL 5375 | Covestro | Desmodur® BL 5375 is a blocked aliphatic crosslinking stoving urethane resin based on HMDI and dissolved in solvent naptha 100/1-methoxypropylacetate-2, 1:1. It was developed as a hardener component for lightfast one-pack stoving polyurethane systems. As ...voir plus Desmodur® BL 5375 is a blocked aliphatic crosslinking stoving urethane resin based on HMDI and dissolved in solvent naptha 100/1-methoxypropylacetate-2, 1:1. It was developed as a hardener component for lightfast one-pack stoving polyurethane systems. As with air-drying two-pack PU coatings, the film properties can be influenced by the crosslinking density and the selection of hydroxylbearing polyol co-reactant. voir moins | |
| Desmodur® E 1160 MPA/X | Covestro | Desmodur® E 1160 MPA/X is an aromatic prepolymer based on toluene diisocyanate (TDI). It is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for m...voir plus Desmodur® E 1160 MPA/X is an aromatic prepolymer based on toluene diisocyanate (TDI). It is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for mineral building material. Clear impregnating systems based on Desmodur® E 1160 MPA/X provide surfaces with long-term protection against moisture, oil, fuels, aggressive chemicals and chemical damage. voir moins | |
| Desmodur® E 14 | Covestro | Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant fin...voir plus Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant finishes and sprayable coatings. Desmodur E 14 can be used with amine crosslinkers to provide tough flexible films. voir moins | |
| Desmodur® E 21 | Covestro | Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). It is a solvent-free liquid of medium viscosity. It is suitable for use in the formulation of moisture-curing, one-component systems which, when thinned w...voir plus Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). It is a solvent-free liquid of medium viscosity. It is suitable for use in the formulation of moisture-curing, one-component systems which, when thinned with a suitable solvent, can be used as primers and sealers for porous substrates to provide protection against moisture, oil, fuel and other chemicals. It can also be used as a binder in the formulation of synthetic resin mortars. voir moins | |
| Desmodur® H | Covestro | Desmodur® H is a monomeric aliphatic diisocyanate. It is used mainly in the manufacture of polyisocyanates, for example, polyurethane coating raw materials. | |
| Desmodur® HL BA | Covestro | Desmodur® HL BA is an aliphatic/aromatic polyisocyanate copolymer based on toluene diisocyanate (TDI) and and hexamethylene diisocyanate (HDI) and dissolved in n-butyl acetate. Used in the formulation of fast-drying two-component coatings. Drying times of...voir plus Desmodur® HL BA is an aliphatic/aromatic polyisocyanate copolymer based on toluene diisocyanate (TDI) and and hexamethylene diisocyanate (HDI) and dissolved in n-butyl acetate. Used in the formulation of fast-drying two-component coatings. Drying times of coatings using Desmodur® HL BA are considerably shorter than those of coatings based on Desmodur® CB polyisocyanates and somewhat longer than those based on Desmodur® IL polyisocyanate. voir moins | |
| Desmodur® I | Covestro | Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and po...voir plus Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and polymers. The isocyanate groups present in Desmodur® I diisocyanate can undergo addition reactions at room temperature with compounds which contain active hydrogens, making it a valuable organic intermediate. The difference in reactivity between the isocyanate groups in Desmodur® I diisocyanate is especially useful in the preparation of polyurethane products. voir moins | |
| Desmodur® IL 1351 51% BA | Covestro | Desmodur® IL 1351 51% BA is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 51% in butyl acetate. Can be used in combination with Desmophen® 1300 for the formulation of very fast drying, two-component polyurethane ...voir plus Desmodur® IL 1351 51% BA is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 51% in butyl acetate. Can be used in combination with Desmophen® 1300 for the formulation of very fast drying, two-component polyurethane coatings. Such systems are used in the furniture industry, among others, where very short drying times and early sandability are required. voir moins | |
| Desmodur® IL 1451 | Covestro | Desmodur® IL 1451 is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Two-pack polyurethane coatings based on Desmodur® IL 1451 are characterized by their rapid initial drying and early sandability. This is ...voir plus Desmodur® IL 1451 is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Two-pack polyurethane coatings based on Desmodur® IL 1451 are characterized by their rapid initial drying and early sandability. This is most important in industrial wood and furniture finishing. voir moins | |
| Desmodur® IL BA | Covestro | Desmodur® IL BA is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates. Coati...voir plus Desmodur® IL BA is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates. Coatings based on Desmodur® IL BA lend themselves to applications requiring high production rates and fast dry-to-handle times. Wood coatings formulated with Desmodur® IL BA show quick sanding properties. The applied finishes show little tendency to run from sharp edges. voir moins |
