| ALQUIMEX 109 | Polimeros Sinteticos, S.A de C.V | The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, e...voir plus The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, enamels for repainting automobiles of high brightness, resistance to yellowing, and enamels for industrial finishes. voir moins | |
| ALQUIMEX CC-60X | Polimeros Sinteticos, S.A de C.V | The short oil alkyd of the coconut in xylene owns excellent finished durability and brightness to of baking, maintaining the permanent firmness in the color, hardness and brightness. For baking enamel, special plasticizers for nitrocellulose lacquers, lac...voir plus The short oil alkyd of the coconut in xylene owns excellent finished durability and brightness to of baking, maintaining the permanent firmness in the color, hardness and brightness. For baking enamel, special plasticizers for nitrocellulose lacquers, lacquers for furniture, and special enamels. voir moins | |
| ALQUIMEX LS-70GN | Polimeros Sinteticos, S.A de C.V | Alkyd resin without modifying of long oil, dilute in naphtha. For the architectonic enamel formulation of inner and outer drying to the domestic air, easy application with brush, and excellent durability in exteriors. | |
| ALQUIMEX S-50GN | Polimeros Sinteticos, S.A de C.V | Medium oil length Alkyd resin of soybean, diluted in naphtha. For domestic enamel formulation of drying of 4 hours max., provides excellent appearance and outer resistance wing. | |
| ALQUIMEX S-50T | Polimeros Sinteticos, S.A de C.V | Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requi...voir plus Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requirements with drying, adhesion, flexibility, abrasion, exudation and resistance to the gasoline, as well as the resistance outdoors. voir moins | |
| ALQUIMEX SC-60X | Polimeros Sinteticos, S.A de C.V | The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in...voir plus The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in solution and resins of urea, and melamine, to obtain finished from greater hardness by baked systems. voir moins | |
| ALQUIMEX SE–50X | Polimeros Sinteticos, S.A de C.V | Alkyd resin modified with styrene monomer, diluted in xylene. It owns excellent properties in the enamel elaboration of drying to the air, distributes excellent brightness, hardness, good retention of the color and resistance to the water. | |
| ALQUIMEX SVT-60X | Polimeros Sinteticos, S.A de C.V | Alkyd resin modified with monomer of vinyl toluene, diluted in xylene. Enamel for application with brush and/or by aspersion, enamels for tools, and primary, industrial enamels for drying to the air and by low baking. | |
| Brij™ C20 | Croda Coatings & Polymers | Brij™ C20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...voir plus Brij™ C20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. voir moins | |
| Brij™ L23 | Croda Coatings & Polymers | Brij™ L23 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...voir plus Brij™ L23 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. voir moins | |
| Brij™ L4 | Croda Coatings & Polymers | Brij™ L4 is a multifunctional, non-silicone and non-fluorinated colorless, liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety o...voir plus Brij™ L4 is a multifunctional, non-silicone and non-fluorinated colorless, liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. voir moins | |
| Brij™ S10 | Croda Coatings & Polymers | Brij™ S10 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...voir plus Brij™ S10 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. voir moins | |
| Cirrasol G-1300 | Croda Coatings & Polymers | Cirrasol G-1300 is a POE-(100)-castor oil, ethoxylated triglyceride. It is used as an O/W (co-) emulsifier for waxes, oils, polysiloxanesalkyd resins and organic esters; as well as a polyurethane building block. | |
| Cirrasol G-265 | Croda Coatings & Polymers | Cirrasol G-265 is an oily liquid, anti-stat additive with effective anti-static behavior and good thermal stability. | |
| Crodafos™ T6A | Croda Coatings & Polymers | Crodafos™ T6A is a POE isotridecyl phosphate used as a formulation enhancer to solve challenges in aqueous and non-aqueous formulations. It is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It also ...voir plus Crodafos™ T6A is a POE isotridecyl phosphate used as a formulation enhancer to solve challenges in aqueous and non-aqueous formulations. It is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It also functions as a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match any formulation needs. voir moins | |
| Crodamide EBO | Croda Coatings & Polymers | Crodamide EBO is a bis-amide anti-tag additive used to prevent blocking and as anti-tack of adhesives. It is used to prevent the adhesive granulate from sticking together during storage, or to prevent adhesive film layers to attract dirt or stick together...voir plus Crodamide EBO is a bis-amide anti-tag additive used to prevent blocking and as anti-tack of adhesives. It is used to prevent the adhesive granulate from sticking together during storage, or to prevent adhesive film layers to attract dirt or stick together before application by reactivation or melting. voir moins | |
| Crodamide EBS | Croda Coatings & Polymers | Crodamide EBS is a bis-amide anti-blocking additive used to prevent blocking and as anti-tack of adhesives. It is used to prevent the adhesive granulate from sticking together during storage, or to prevent adhesive film layers to attract dirt or stick to...voir plus Crodamide EBS is a bis-amide anti-blocking additive used to prevent blocking and as anti-tack of adhesives. It is used to prevent the adhesive granulate from sticking together during storage, or to prevent adhesive film layers to attract dirt or stick together before application by reactivation or melting. voir moins | |
| Crodamide S | Croda Coatings & Polymers | Crodamide S is a fast migrating primary amide additive which gives excellent anti-blocking performance at low temperatures. Adhesive pellets or film often exhibit adhesion between the polymer pellets or layers when exposed to elevated temperatures and pre...voir plus Crodamide S is a fast migrating primary amide additive which gives excellent anti-blocking performance at low temperatures. Adhesive pellets or film often exhibit adhesion between the polymer pellets or layers when exposed to elevated temperatures and pressures. This product is used to prevent adhesive granulates from sticking together during storage at moderate and low temperatures. Crodamide S also prevents adhesive film layers to attract dirt or stick together before application by reactivation or melting. It can be incorporated directly into polymers to prevent any unwanted adhesion. The amide migrates fast to the surface of the material on cooling to form a non-sticking ‘release’ layer. It may be used in conjunction with organic additives such as talc to enhance performance. voir moins | |
| DYHARD® 100 | AlzChem | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...voir plus DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100M | AlzChem | DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100S | AlzChem | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SF | AlzChem | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SH | AlzChem | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® A5M30 | AlzChem | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...voir plus DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. voir moins | |
| DYHARD® D50EP | AlzChem | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...voir plus DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. voir moins | |
| DYHARD® DF50EP | AlzChem | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...voir plus DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. voir moins | |
| DYHARD® OTB | AlzChem | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...voir plus DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® UR500 | AlzChem | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® UR700 | AlzChem | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...voir plus DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. voir moins | |
| DYHARD® UR800 | AlzChem | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® URAcc57 | AlzChem | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Maxemul™ 6106 | Croda Coatings & Polymers | Maxemul™ 6106 is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and electrolyte tolerance. | |
| Maxemul™ 6112 | Croda Coatings & Polymers | Maxemul™ 6112 is a non-migratory, anionic surfactant for superior emulsion stability in latex systems and excellent moisture resistance or adhesive properties in coatings or psa's. | |
| Multiwet™ BD - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ BD - Multifunctional wetting agent is a non-silicone and non-fluorinated multifunctional surfactant. Multiwet BD offers excellent wetting of clean, unprepared or low energy substrates and is best in class for biodegradability. | |
| Multiwet™ EF - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ EF - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet EF offers excellent wetting with a very low critical micelle concentration and is the best in class for efficiency. | |
| Multiwet™ SO - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SO - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SO offers excellent wetting with a low VOC content and is best in class at solids wetting. | |
| Multiwet™ SU - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SU - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SU offers excellent wetting especially of clean and low energy substrates and is best in class for substrate wetting. | |
| Multiwet™ VE - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ VE - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet VE offers excellent wetting of clean, unprepared and low energy surfaces and is best in class for versatility. | |
| Priamine™ 1074 - Dimer Diamine | Croda Coatings & Polymers | Priamine™ 1074 is a low viscous dimer diamine building block for use in polyamides and polyurethane coatings and adhesives. It offers high flexibility, moisture repellency and adhesion. | |
| Priplast 3162 | Croda Coatings & Polymers | Priplast 3162 is a semicrystalline, dimer fatty acid based polyester polyol building block for PU coatings (PUD) for excellent wetting of rigid and fibrous substrates providing hardness, flexibility and good adhesion. | |
| Priplast 3172 | Croda Coatings & Polymers | Priplast 3172 is a semicrystalline, dimer fatty acid based polyester polyol building block for PU coatings and adhesives for excellent durability and adhesion. | |
| Priplast™ 3188 - Polyester Polyol (Amorphous) | Croda Coatings & Polymers | Priplast™ 3188 is an amorphous polyester polyol building block for use in a wide variety of polyurethane systems. It offers hydrolytic stability and is suitable for cross-linked or 2K systems. | |
| Priplast™ 3190 | Croda Coatings & Polymers | Priplast™ 3190 is a liquid, semi-crystalline, dimer fatty acid based polyester polyol building block for PU coatings, adhesives and sealants with good compatability with polyether and polyester polyols. It provides resistance to hydrolytic attack, alkali ...voir plus Priplast™ 3190 is a liquid, semi-crystalline, dimer fatty acid based polyester polyol building block for PU coatings, adhesives and sealants with good compatability with polyether and polyester polyols. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. voir moins | |
| Priplast™ 3192 | Croda Coatings & Polymers | Priplast™ 3192 is a semicrystalline, dimer fatty acid based polyester polyol building block for PU coatings and adhesives with excellent hydrolytic resistance and mechanical properties. It provides resistance to hydrolytic attack, alkali and acid, oxidati...voir plus Priplast™ 3192 is a semicrystalline, dimer fatty acid based polyester polyol building block for PU coatings and adhesives with excellent hydrolytic resistance and mechanical properties. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. voir moins | |
| Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) | Croda Coatings & Polymers | Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) is a bio-based polyester polyol used in water repellent PU flexible foams and sealants, cast PU elastomers, and 2K PU adhesives. It provides resistance to hydrolytic attack, alkali and acid, oxidative ...voir plus Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) is a bio-based polyester polyol used in water repellent PU flexible foams and sealants, cast PU elastomers, and 2K PU adhesives. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. voir moins | |
| Pripol™ 1010 | Croda Coatings & Polymers | Pripol™ 1010 is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, im...voir plus Pripol™ 1010 is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, improved flexibility, thermo-oxidative stability, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, elastomers, automotive coatings, engineering plastics, advanced ceramics, and industrial coating applications. voir moins | |
| Pycal® 94 | Croda Coatings & Polymers | Pycal® 94 is a plasticizer for emulsion adhesives. It has a number of characteristics which make it unique among polyvinyl acetate plasticizers. It has a thickening effect on polyvinyl acetate emulsions, thus reducing or eliminating the need for other thi...voir plus Pycal® 94 is a plasticizer for emulsion adhesives. It has a number of characteristics which make it unique among polyvinyl acetate plasticizers. It has a thickening effect on polyvinyl acetate emulsions, thus reducing or eliminating the need for other thickening agents. voir moins | |
| SILZOT® FS-X1 | AlzChem | SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride po...voir plus SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride powders show a very stable and uniform high quality and are manufactured with best environmental practice. voir moins | |
| Silzot® HQ plus (Powder) | AlzChem | Silzot® HQ plus (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| Silzot® HQ (Powder) | AlzChem | Silzot® HQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| SILZOT® RTP | AlzChem | SILZOT® RTP is a spray dried granulated silicon nitride powder containing processing and sintering additives. | |
| Silzot® SQ | AlzChem | Silzot® SQ is a fine powder derived from the direct chemical reaction of highly purified silicon and nitrogen. | |
| Silzot® TQ (Powder) | AlzChem | Silzot® TQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| Synperonic™ 13/12 | Croda Coatings & Polymers | Synperonic™ 13/12 is a nonionic surfactant with good pigment wetting and emulsifying properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. | |
| Synperonic™ 13/6 | Croda Coatings & Polymers | Synperonic™ 13/6 is a nonionic surfactant with good wetting properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also a multifunctional...voir plus Synperonic™ 13/6 is a nonionic surfactant with good wetting properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. voir moins | |
| Synperonic PE/F108 | Croda Coatings & Polymers | Synperonic PE/F108 is a ethoxylated polypropylene glycol MW 14000. It is used as a polymeric O/W emulsifier for polyester and epoxy resins with excellent dry film properties, dispersant for superior colloidal stability. | |
| Synperonic PE/F127 | Croda Coatings & Polymers | Synperonic PE/F127 is an ethoxylated polypropylene glycol MW 12000. It is used as a polymeric O/W emulsifier for polyester and epoxy resins with excellent dry film properties, solubilizer, and dispersant for superior colloidal stability. | |
| Synperonic PE/L101 | Croda Coatings & Polymers | Synperonic PE/L101 is an ethoxylated polypropylene glycol MW 3800. It is used as an effective defoamer and polyether polyol building block with enhanced reactivity. | |
| Synperonic PE/L31 | Croda Coatings & Polymers | Synperonic PE/L31 is an ethoxylated polypropylene glycol MW 1100. It is used as an effective defoamer and polyether polyol building block with enhanced reactivity. | |
| Synperonic PE/L61 | Croda Coatings & Polymers | Synperonic PE/L61 is an ethoxylated polypropylene glycol MW 2000. It is used as an effective defoamer and polyether polyol building block with enhanced reactivity. | |
| Synperonic PE/L64 | Croda Coatings & Polymers | Synperonic PE/L64 is an ethoxylated polypropylene glycol MW 2900. It is used as a polymeric emulsion stabilizer. | |
| Synperonic T/701 | Croda Coatings & Polymers | Synperonic T/701 is a liquid, alkoxylated ethylene diamine. It is an excellent cross-linker in PU systems improving water and solvent resistance. It also functions as a low foaming water soluble surfactant used in multiple applications as emulsifier or di...voir plus Synperonic T/701 is a liquid, alkoxylated ethylene diamine. It is an excellent cross-linker in PU systems improving water and solvent resistance. It also functions as a low foaming water soluble surfactant used in multiple applications as emulsifier or dispersant. voir moins | |
| Tween 20 | Croda Coatings & Polymers | Tween 20 is a liquid, POE-(20)-sorbitan monolaurate. It is used as a versatile dispersant, humectant, wetting agent, solubilizer, and O/W emulsifier for multiple applications. | |
| Tween 60 | Croda Coatings & Polymers | Tween 60 is a solid, POE-(20)-sorbitan monostearate. It is used as a low foam, dispersant, and O/W emulsifier. | |
| Zephrym PD 1000 | Croda Coatings & Polymers | Zephrym PD 1000 is a low VOC polymeric dispersant. It is used as a non VOC dispersant for inorganic particles in low polarity non-aqueous systems. | |
| Zephrym™ PD 2206 | Croda Coatings & Polymers | Zephrym™ PD 2206 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has enhanced di...voir plus Zephrym™ PD 2206 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has enhanced dispersion of particles in low polarity solvent and resin systems. This product is well suited for both organic and inorganic pigments and fillers, as well as carbon black. It is FDA indirect food contact approved and provides excellent performance in liquid color for plastics. voir moins | |
| Zephrym™ PD 7000 | Croda Coatings & Polymers | Zephrym™ PD 7000 is a liquid, cationic, polymeric pigment dispersant for enhanced color development. It is a versatile polymeric dispersant that can be used in aqueous and high polarity solvent or resin systems. This product is particularly suited for dis...voir plus Zephrym™ PD 7000 is a liquid, cationic, polymeric pigment dispersant for enhanced color development. It is a versatile polymeric dispersant that can be used in aqueous and high polarity solvent or resin systems. This product is particularly suited for dispersion of carbon black, inorganic pigments and fillers, and for use in electronics and adhesives applications. voir moins |
