| EPI-REZ™ Resin 7521-WH-57 | Brenntag North America | EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concret...voir plus EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concrete substrates. EPIREZ™ Resin 7521-WH-57 exhibits good compatibility with many water-reducible amine curing agents and is designed for use with either EPIKURE™ Curing Agent 8530-W-75 or EPIKURE™ Curing Agent 6870-W-53. EPI-REZ Resin 7521-WH-57, when combined with EPIKURE™ 8530-W-75, provides a cost-effective, high-performance alternative to traditional waterborne epoxy coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. 1 Hazardous air pollutants as defined by the US Environmental Protection Agency. voir moins | Request Sample |
| EPI-REZ™ Resin 7720-W-50 | Brenntag North America | EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional so...voir plus EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional solvent-based epoxy coatings at an ultra-low VOC (<50 g/L). EPI-REZ Resin 7720-W-50 may be used in non-HAP waterborne formulations for metal and concrete substrates. EPI-REZ Resin 7720-W-50 exhibits good compatibility with a water-reducible amine curing agents. A variety of EPIKURE™ curing agents may be used with EPI-REZ Resin 7720-W-50 (e.g., EPIKURE Curing Agent 6870-W-53 and EPIKURE Curing Agent 8530-W75). voir moins | Request Sample |
| EPIKOTE™ Resin 235 | Brenntag North America | EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no dil...voir plus EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no diluent. Its principal feature, as determined in laboratory tests is that it has excellent crystallization resistance during storage. Furthermore, the addition of reactive diluents, e.g., in the production of formulated compositions, has little to no adverse effect on crystallization resistance. EPIKOTE Resin 235 also provides good pigment-wetting and good resistance to filler settling. (Note: EPIKOTE Resin 235 is one product out of a series. There are other resin blends of similar type that offer the formulator a choice of starting viscosity). voir moins | Request Sample |
| EPIKOTE™ Resin 240 | Brenntag North America | EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono...voir plus EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono-epoxidized alcohol as a reactive diluent. The resin has lower volatility and lower odor factors which are responsible for its agreeable handling characteristics. EPIKOTE 240 has superior crystallization resistance during storage. voir moins | Request Sample |
| EPIKURE™ Curing Agent 3115-U-80 | Brenntag North America | EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions ...voir plus EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions of isopropyl alcohol at 73% solids, xylene at 70 solids, and Aromatic 100 at 80% solids. Other solutions may be made available upon request. voir moins | Request Sample |
| EPIKURE™ Curing Agent 3125 | Brenntag North America | EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, pottin...voir plus EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, potting, adhesives, caulks and voir moins | Request Sample |
| EPIKURE™ Curing Agent 3393 | Brenntag North America | EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liq...voir plus EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liquid epoxy resins such as EPON Resin 8132. voir moins | Request Sample |
| EPIKURE™ Curing Agent 580 | Brenntag North America | EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop ...voir plus EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop flooring formulations with lower indoor air emissions. voir moins | Request Sample |
| EPIKURE™ Curing Agent 6870-W-53 | Brenntag North America | EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy co...voir plus EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy coatings in low VOC1, non-HAPS2 waterborne epoxy coatings. Although EPIKURE Curing Agent 6870-W-53 exhibits good compatibility with other epoxy resin dispersions, it is designed for use with EPI-REZ™ Resin 6520-WH-53. 1 VOC is the acronym for volatile organic compound, as defined by the U.S. 40CFR51.100 (s). 2 HAP is the acronym for a hazardous air pollutant, as defined by the U.S. Clean Air Act Amendments of 1990. voir moins | Request Sample |
| EPIKURE™ Curing Agent 8530-W-75 | Brenntag North America | EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to ...voir plus EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to produce ambient-cure metal and concrete coatings. EPIKURE 8530-W-75, when combined with the solid epoxy resin dispersion EPI-REZ™ Resin 7520-WD-52, provides a cost-effective, high-performance alternative to traditional solvent-borne coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. voir moins | Request Sample |
| EPIKURE LY™ Curing Agent 3801 | Brenntag North America | EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy re...voir plus EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. voir moins | Request Sample |
| EPON LY™ Resin 1810 | Brenntag North America | EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curi...voir plus EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. voir moins | Request Sample |
| EPON™ Resin 1001-CX-75 | Brenntag North America | EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resista...voir plus EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resistance, corrosion resistance, and low color. This resin is used in formulating various room temperature curing industrial maintenance coatings including clears, primers, masonry surfaces, and gloss and semigloss enamels. The base resin is also available in other solvent lineups. voir moins | Request Sample |
| EPON™ Resin 1007F | Brenntag North America | EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007...voir plus EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007F is usually reacted with urea formaldehyde or phenol-formaldehyde resins to develop the desired film properties. Coatings of this type exhibit outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Some of the more important applications for EPON Resin 1007F/ureaformaldehyde or phenol formaldehyde coatings are linings for metal containers, appliance primers, metal furniture finishes, and clear coatings for brass hardware and cosmetic cases. EPON Resin 1007F also finds application in powder coatings and may be used as a partial replacement for other EPON Resins in amine or polyamide cured two package coatings. In addition, this product can be reacted with vegetable oil acids and isocyanate curing agents to produce epoxy resin esters and urethane coatings, respectively. voir moins | Request Sample |
| EPON™ Resin 160 | Brenntag North America | EPON™ Resin 160 is a multifunctional novolac resin. It combines low viscosity and ease of processing with good thermal stability and chemical resistance for use in a number of applications. | Request Sample |
| EPON™ Resin 233 | Brenntag North America | EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with ...voir plus EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with cycloaliphatic amine curing agents. voir moins | Request Sample |
| EPON™ Resin 828 | Brenntag North America | EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obt...voir plus EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obtained. Because of this versatility, EPON Resin 828 has become a standard epoxy resin used in formulation, fabrication, and fusion technology. voir moins | Request Sample |
| EPON™ Resin 874-G-90 | Brenntag North America | EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications,...voir plus EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications, EPON Resin 874-G-90 outperforms standard liquid epoxy resin grades (e.g., EPON Resin 828) offering better flexibility and faster dry times while providing comparable performance to solid epoxy resin grades like EPON Resin 1001F. EPON Resin 874-G-90 can be formulated into non-HAPs coatings (<250 g/l VOC) that offer performance equivalent to standard epoxy-polyamide systems. A wide variety of curing agents can be used with EPON 874-G-90 including low viscosity polyamidoamines (e.g. EPIKURE™ Curing Agent 3175), cycloaliphatic amines, and amine adducts. voir moins | Request Sample |
| EPOSIL™ Resin 5550 | Brenntag North America | EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-perform...voir plus EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-performance topcoats with the potential to reduce the overall cost of ownership through improved durability and fewer coating layers. voir moins | Request Sample |
| Geotex® FXT Calcium Carbonate | Huber Engineered Materials | Geotex® FXT is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties and high brightness. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology...voir plus Geotex® FXT is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties and high brightness. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology modifier. voir moins | |
| Geotex® FXZ Calcium Carbonate | Huber Engineered Materials | Geotex® FXZ is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology modifier. | |
| Geotex® TXS Calcium Carbonate | Huber Engineered Materials | Geotex® TXS is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties and high brightness. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology...voir plus Geotex® TXS is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties and high brightness. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology modifier. voir moins | |
| HELOXY™ Modifier 8 | Brenntag North America | HELOXY™ Modifier 8 is an aliphatic monoglycidyl ether containing alkyl chains that are predominately C12 and C14 in length. Its primary use is the viscosity reducing modification of epoxy resin formulations. | Request Sample |
| HN 336 ALUMINA TRIHYDRATE | Huber Engineered Materials | HN-336 is a halogen–free, medium particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, an...voir plus HN-336 is a halogen–free, medium particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-336 is recommended for spray-up or hand-lay up FRP applications, filament winding, panel production, resin injection, foam materials, cast polymer and epoxy parts, coatings, adhesives, latex, vinyl and urethane compounds. voir moins | |
| HN 36 ALUMINA TRIHYDRATE | Huber Engineered Materials | HN-36 is a halogen–free, medium-coarse particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading leve...voir plus HN-36 is a halogen–free, medium-coarse particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-36 is recommended for rubber goods, compression molded thermosets, coatings, adhesives, latex, vinyl and urethane compounds and carpet backings. voir moins | |
| HN 434 Alumina Trihydrate | Huber Engineered Materials | HN-434 is a halogen–free, fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and ...voir plus HN-434 is a halogen–free, fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-434 is recommended for spray-up or hand-lay up FRP applications, filament winding, panel production, resin injection, foam materials, cast polymer and epoxy parts, coatings, adhesives, latex, vinyl and urethane compounds. voir moins | |
| HN 532 Alumina Trihydrate | Huber Engineered Materials | HN-532 is a halogen–free, very fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels,...voir plus HN-532 is a halogen–free, very fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-532 is recommended for spray-up or hand lay-up FRP applications, filament winding, panel production, resin injection, foam materials, add cast polyester and epoxy parts, coatings, adhesives, latex, vinyl and urethane. voir moins | |
| Huberbrite® 10 Barium Sulfate | Huber Engineered Materials | Huberbrite® 10 is a high brightness, 10 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases sp...voir plus Huberbrite® 10 is a high brightness, 10 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases specific gravity and improves the chemical resistance of the surface coating. It can also be used as a corrosion protective additive in paints and coatings due to its weather resistant properties. voir moins | |
| Huberbrite® 7 Barium Sulfate | Huber Engineered Materials | Huberbrite® 7 is a high brightness, 7 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases spe...voir plus Huberbrite® 7 is a high brightness, 7 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases specific gravity and improves the chemical resistance of the surface coating. It can also be used as a corrosion protective additive in paints and coatings due to its weather resistant properties. voir moins | |
| Hubercarb® G 260 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G260 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® G260 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® G3 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® G3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® G325 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G325 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® G325 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® G35 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G35 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent...voir plus Hubercarb® G35 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® G35 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® G6 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent...voir plus Hubercarb® G6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® G6 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® G8 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G8 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® G8 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® G8 can also improve the physical and rheological properties of powder coatings. voir moins | |
| HUBERCARB® M200 CALCIUM CARBONATE | Huber Engineered Materials | Hubercarb® M200 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® M200 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. voir moins | |
| Hubercarb® M3 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® M3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® M3 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® M300 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M300 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® M300 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® M4 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M4 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® M4 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® M4 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® M6 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® M6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® M6 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® Q325 Calcium Carbonate | Huber Engineered Materials | Hubercarb® Q325 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® Q325 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® Q6 Calcium Carbonate | Huber Engineered Materials | Hubercarb® Q6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® Q6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® Q6 can also improve the physical and rheological properties of powder coatings. voir moins | |
| HYMOD® M1500 SPD TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M1500 SPD is a fine particle size, surface treated ATH product that provides functional reinforcement, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. Mechani...voir plus Hymod® M1500 SPD is a fine particle size, surface treated ATH product that provides functional reinforcement, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. Mechanical properties observed with Hymod® M1500 SPD are comparable to fine particle precipitated alumina trihydrate. voir moins | |
| Hymod® M632 SG TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M632 SG is a fine particle size, surface treated alumina trihydrate commonly known as aluminum hydroxide product that provides flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyo...voir plus Hymod® M632 SG is a fine particle size, surface treated alumina trihydrate commonly known as aluminum hydroxide product that provides flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this product to have low moisture and to be easily and uniformly dispersed into polymers at high loading levels without causing processing rheology concerns. Hymod® M632 SG can be used in such applications as foamed insulation, wire and cable jacketing, TPO roofing membranes, injection molded and extruded polyolefins, compression molded thermosets and solvent borne coatings. voir moins | |
| Hymod® M9400 SG TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M9400 SG is a precipitated, surface treated ATH product that provides flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this pr...voir plus Hymod® M9400 SG is a precipitated, surface treated ATH product that provides flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this product to have low moisture and to be easily and uniformly dispersed into polymers at high loading levels. Hymod® M9400 SG can be used in such applications as foamed insulation, wire and cable insulation and jacketing, injection molded and extruded polyolefins and solvent borne coatings. This product provides excellent processing characteristics as well as superior electrical and mechanical properties. voir moins | |
| HYMOD® M9400 SP TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M9400 SP aluminum hydroxide (ATH) is a vinyl- functionalized, precipitated grade developed for peroxide-cured silicone rubber. Everything about this product has been optimized for maximum performance in high-voltage, silicone rubber insulator compo...voir plus Hymod® M9400 SP aluminum hydroxide (ATH) is a vinyl- functionalized, precipitated grade developed for peroxide-cured silicone rubber. Everything about this product has been optimized for maximum performance in high-voltage, silicone rubber insulator compositions. Silicone rubber compound containing Hymod® M9400 SP does not stick in the mold. This increases the value of your compound to your customers. They will save money by reducing the number of rejected parts. voir moins | |
| Hymod® SB432 SG TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® SB432 SG is a medium particle size, surface treated ATH product that provides hydrophobicity, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modi...voir plus Hymod® SB432 SG is a medium particle size, surface treated ATH product that provides hydrophobicity, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this product to have low moisture and to be easily and uniformly dispersed into polymers at high loading levels without causing processing rheology concerns. voir moins | |
| KEMGARD® 911A MOLYBDATE COMPOUND | Huber Engineered Materials | Kemgard® 911A is a high efficiency calcium zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properti...voir plus Kemgard® 911A is a high efficiency calcium zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties and ensure better dispersion in the polymer matrix. Can be used in automotive and building applications where certain criteria for flame retardance is required. voir moins | |
| KEMGARD® 911B MOLYBDATE COMPOUND | Huber Engineered Materials | Kemgard® 911B is a high efficiency basic zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties...voir plus Kemgard® 911B is a high efficiency basic zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties and ensure better dispersion in the polymer matrix. Can be used in automotive and building applications where certain criteria for flame retardance is required. voir moins | |
| KEMGARD® 911C MOLYBDATE COMPOUND | Huber Engineered Materials | Kemgard® 911C is a high efficiency zinc molybdate-magnesium silicate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder fl...voir plus Kemgard® 911C is a high efficiency zinc molybdate-magnesium silicate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties and ensure better dispersion in the polymer matrix. Can be used in automotive and building applications where certain criteria for flame retardance is required. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| MICRAL® 632 ALUMINA TRIHYDRATE | Huber Engineered Materials | Micral® 632 is a mechanically produced ATH product designed for plastic and rubber applications requiring a fine particle size. The high surface area of Micral 632 provides a low cost approach to flame retardance and smoke suppression in applications such...voir plus Micral® 632 is a mechanically produced ATH product designed for plastic and rubber applications requiring a fine particle size. The high surface area of Micral 632 provides a low cost approach to flame retardance and smoke suppression in applications such as urethane foams, vinyl, SBR belting, EPDM, EPR, adhesives, coatings, ABS, polyolefins and XPLE. A complete range of surface modifications is available to aid processing and enhance physical properties. These include silanes, stearates and wetting agents. voir moins | |
| Micral® AM550 ALUMINA TRIHYDRATE | Huber Engineered Materials | Micral® AM550 is a narrow particle size distribution flame retardant and smoke suppressant with a median particle size of about 5.5 microns which offers a lower surface area. Used in adhesive, caulk, sealant and paints and coating applications. | |
| P. GLYCOL ETHER DPNB | Brenntag North America | P. GLYCOL ETHER DPNB (Dipropylene glycol n-butyl ether) is a colourless liquid with a mild odour and low volatility. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, texti...voir plus P. GLYCOL ETHER DPNB (Dipropylene glycol n-butyl ether) is a colourless liquid with a mild odour and low volatility. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaners, agricultural products, and adhesives. voir moins | Request Sample |
| P. GLYCOL ETHER PNB | Brenntag North America | P. GLYCOL ETHER PNB (Propylene glycol n-butyl ether) is a colourless liquid with a characteristic odour. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaner...voir plus P. GLYCOL ETHER PNB (Propylene glycol n-butyl ether) is a colourless liquid with a characteristic odour. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaners, and adhesives. voir moins | Request Sample |
| P. GLYCOL ETHER PPH | Brenntag North America | P. GLYCOL ETHER PPH (P. Glycol ether PPH) is a slow-evaporating, very hydrophobic glycol ether ideal in coalescing and carrier solvent applications. It has a low odor. Ideal for use in latex coalescent in water-based architectural and industrial coatings,...voir plus P. GLYCOL ETHER PPH (P. Glycol ether PPH) is a slow-evaporating, very hydrophobic glycol ether ideal in coalescing and carrier solvent applications. It has a low odor. Ideal for use in latex coalescent in water-based architectural and industrial coatings, carrier solvent for textile dyes, solvent for inks in ball point and felt tip pens, stamp pads, and textile printing pastes, paint removers, coalescent for latex adhesives, and is useful in the formulation of homogeneous, stable metalworking fluids. voir moins | Request Sample |
| Research Curing Agent RSC-4628 | Brenntag North America | Research Curing Agent RSC-4628 is a light color, very low viscosity, amino silane curing agent that is used with EPOSIL™ Resin 5550 for the development of lower yellowing protective topcoats. | Request Sample |
| SB 336 ALUMINA TRIHYDRATE | Huber Engineered Materials | SB-336 is a medium particle size ATH product that provides low cost flame retardancy and smoke suppression in a variety of applications. The unique particle size is specifically designed for low viscosites, high filler loading levels, and excellent proces...voir plus SB-336 is a medium particle size ATH product that provides low cost flame retardancy and smoke suppression in a variety of applications. The unique particle size is specifically designed for low viscosites, high filler loading levels, and excellent processing characteristics. SB-336 is recommended for spray-up or hand lay-up FRP applications, filament winding, panel production, resin injection, SMC/BMC, foam materials, and cast polyester and epoxy parts. voir moins | |
| SB 36 ALUMINA TRIHYDRATE | Huber Engineered Materials | SB-36 is a coarse, mechanically ground alumina trihydrate used to suppress flame and smoke in applications such as latex, vinyl and urethane compounds. | |
| SB 432 ALUMINA TRIHYDRATE | Huber Engineered Materials | SB-432 was developed especially for SMC, BMC, resin injection and high solids coatings, has a unique particle size distribution that provides the best possible combination of viscosity, flame, electrical and molding properties that can be derived from an ...voir plus SB-432 was developed especially for SMC, BMC, resin injection and high solids coatings, has a unique particle size distribution that provides the best possible combination of viscosity, flame, electrical and molding properties that can be derived from an ATH filler. A closely controlled top size with a large super fine faction yields rapid dispersion in resin. Excellent mold flow and wet-out characteristics result in superior surface profile, minimal porosity, even pigmentation, and excellent filler and reinforcement distribution throughout the molded part. voir moins |
