| 2-(3,4-Epoxycyclohexyl) Ethyltriethoxysilane | Dalian Onichem Co., Ltd. | 2-(3,4-Epoxycyclohexyl) Ethyltriethoxysilane is a coupling and crosslinking agent for waterborne systems. 2-(3,4-Epoxycyclohexyl) Ethyltriethoxysilane is used in latexes and PUD. | Request Sample |
| 2-(3,4-Epoxycyclohexyl) Ethyltrimethoxysilane | Dalian Onichem Co., Ltd. | 2-(3,4-Epoxycyclohexyl) Ethyltrimethoxysilane is a coupling agent for epoxy composites. 2-(3,4-Epoxycyclohexyl) Ethyltrimethoxysilane is compatible with cationic cure chemistries. | Request Sample |
| 3-Chloropropylmethyldimethoxysilane | Dalian Onichem Co., Ltd. | 3-Chloropropylmethyldimethoxysilane is a chloro / ethoxy -functional coupling agent which boils between 70-72°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties,...voir plus 3-Chloropropylmethyldimethoxysilane is a chloro / ethoxy -functional coupling agent which boils between 70-72°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropylmethyldimethoxysilane is also the raw materials for other Organo-functional silanes with methyldimethoxy. voir moins | Request Sample |
| 3-Chloropropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Chloropropyltriethoxysilane is a chloro / ethoxy -functional coupling agent which boils at 220°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties, or used as c...voir plus 3-Chloropropyltriethoxysilane is a chloro / ethoxy -functional coupling agent which boils at 220°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropyltriethoxysilane is also the key intermediate for other Organo-functional silanes with triethoxy. voir moins | Request Sample |
| 3-Chloropropyltrimethoxysilane | Dalian Onichem Co., Ltd. | 3-Chloropropyltrimethoxysilane is a chloro / methoxy -functional coupling agent which boils at 192°C. It is a colorless or light yellowish liquid used in epoxy resins to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropyltrimetho...voir plus 3-Chloropropyltrimethoxysilane is a chloro / methoxy -functional coupling agent which boils at 192°C. It is a colorless or light yellowish liquid used in epoxy resins to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropyltrimethoxysilane is also a key intermediate for the preparation of a variety of amino-, mercapto- and methacryloyloxyorganosilanes which are used as silane coupling agents. voir moins | Request Sample |
| 3-Glycidoxypropylmethyldiethoxysilane | Dalian Onichem Co., Ltd. | 3-Glycidoxypropylmethyldiethoxysilane is a coupling and crosslinking agent for waterborne systems. 3-Glycidoxypropylmethyldiethoxysilane is used in acrylic SBR and polyurethane adhesives. | Request Sample |
| 3-Glycidoxypropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Glycidoxypropyltriethoxysilane is an adhesion promoter in polysulfide, urethane, epoxy and acrylic caulks, sealants, adhesives and coatings. | Request Sample |
| 3-Isocyanatopropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Isocyanatopropyltriethoxysilane is a bonding additive and used for polymer endcapping. | Request Sample |
| 3-Isocyanatopropyltrimethoxysilane | Dalian Onichem Co., Ltd. | 3-Isocyanatopropyltrimethoxysilane is a crosslinking agent used in silylated polyurethanes. | Request Sample |
| 3-Mercaptopropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Mercaptopropyltriethoxysilane is a coupling agent for sulfur, cured rubber, and polyurethanes. | Request Sample |
| 3-Mercaptopropyltrimethoxysilane | Dalian Onichem Co., Ltd. | 3-Mercaptopropyltrimethoxysilane is a coupling agent for sulfur, cured rubber and polyurethanes. | Request Sample |
| 3-Methacryloxypropylmethyldimethoxysilane | Dalian Onichem Co., Ltd. | 3-Methacryloxypropylmethyldimethoxysilane is a comonomer in radical cured resins, such as acrylic, polyester, methacrylate, and PVC. 3-Methacryloxypropylmethyldimethoxysilane is used as a coupling agent for reinforced and filled polyester and acrylics. | Request Sample |
| 3-Methacryloxypropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Methacryloxypropyltriethoxysilane is a comonomer in radical cured resins, such as acrylic, polyester, methacrylate, and PVC. 3-Methacryloxypropyltriethoxysilane is a coupling agent for reinforced and filled polyester and acrylics. | Request Sample |
| 3-Thiocyanatopropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Thiocyanatopropyltriethoxysilane is a coupling agent for mechanical rubber goods, and shoe soles. | Request Sample |
| 3-Ureidopropyltriethoxysilane (50% in Methanol) | Dalian Onichem Co., Ltd. | 3-Ureidopropyltriethoxysilane (50% in Methanol) is a colorless to light brown liquid which boils at 64.5°C. It is an ureido silane used as a coupling agent in a wide range of applications for adhesives, sealants, coatings, foundry and fiber glass. | Request Sample |
| 3-Ureidopropyltrimethoxysilane | Dalian Onichem Co., Ltd. | 3-Ureidopropyltrimethoxysilane is a bonding additive suited for contaminated surfaces. | Request Sample |
| Aqueous Aminoalkyl Silicone Solutions | Dalian Onichem Co., Ltd. | Aqueous Aminoalkyl Silicone Solutions is used for waterborne coatings, adhesives, sealants and primers. | Request Sample |
| Bis-[3-(Triethoxysilyl)Propyl]Amine | Dalian Onichem Co., Ltd. | Bis-[3-(Triethoxysilyl)Propyl]Amine is an efficient crosslinking agent used for polyurethane prepolymer endcapping with good adhesion to difficult substrates. | Request Sample |
| Bis-[3-(Trimethoxysilyl)Propyl]Amine | Dalian Onichem Co., Ltd. | Bis-[3-(Trimethoxysilyl)Propyl]Amine is an efficient crosslinking agent used for polyurethane prepolymer endcapping with good adhesion to difficult substrates. | Request Sample |
| Bis[3-(Triethoxysilyl)Propyl]Disulfide | Dalian Onichem Co., Ltd. | Bis[3-(Triethoxysilyl)Propyl]Disulfide is a coupling agent for rubber belts, hoses, shoe soles and silica filled tires. | Request Sample |
| Bis[3-(Triethoxysilyl)Propyl]Tetrasulfide | Dalian Onichem Co., Ltd. | Bis[3-(Triethoxysilyl)Propyl]Tetrasulfide is a bifunctional polysulfide silane with four sulfur atoms in the center of structure that finds use as adhesion promoter for precious metals, and coupling agent & vulcanizing agent for rubbers. It is ayellowish ...voir plus Bis[3-(Triethoxysilyl)Propyl]Tetrasulfide is a bifunctional polysulfide silane with four sulfur atoms in the center of structure that finds use as adhesion promoter for precious metals, and coupling agent & vulcanizing agent for rubbers. It is ayellowish and transparent liquid used to improve the physical properties of sulfur cured compounds and to establish the chemical link between rubber and silica or other active white fillers. voir moins | Request Sample |
| DYHARD® 100 | AlzChem | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...voir plus DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100M | AlzChem | DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100S | AlzChem | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SF | AlzChem | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SH | AlzChem | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® A5M30 | AlzChem | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...voir plus DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. voir moins | |
| DYHARD® D50EP | AlzChem | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...voir plus DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. voir moins | |
| DYHARD® DF50EP | AlzChem | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...voir plus DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. voir moins | |
| DYHARD® OTB | AlzChem | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...voir plus DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® UR500 | AlzChem | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® UR700 | AlzChem | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...voir plus DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. voir moins | |
| DYHARD® UR800 | AlzChem | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® URAcc57 | AlzChem | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| Geotex® FXT Calcium Carbonate | Huber Engineered Materials | Geotex® FXT is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties and high brightness. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology...voir plus Geotex® FXT is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties and high brightness. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology modifier. voir moins | |
| Geotex® FXZ Calcium Carbonate | Huber Engineered Materials | Geotex® FXZ is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology modifier. | |
| Geotex® TXS Calcium Carbonate | Huber Engineered Materials | Geotex® TXS is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties and high brightness. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology...voir plus Geotex® TXS is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties and high brightness. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology modifier. voir moins | |
| Glutaraldehyde Technical Grade | Dalian Onichem Co., Ltd. | Glutaraldehyde Technical Grade is a colorless, transparent liquid which boils at 101°C. It is frequently used as a disinfecting agent, sterilizing agent, and leather tanning agent. Glutaraldehyde Technical Grade is also used as a fixative for light or el...voir plus Glutaraldehyde Technical Grade is a colorless, transparent liquid which boils at 101°C. It is frequently used as a disinfecting agent, sterilizing agent, and leather tanning agent. Glutaraldehyde Technical Grade is also used as a fixative for light or electron microscopy. voir moins | Request Sample |
| Glyoxal 40% | Dalian Onichem Co., Ltd. | Glyoxal 40% is a colorless to pale yellow and transparent liquid which boils at 104°C. It is most widely used as a cross-linking agent in the production of permanent press resins for textiles, of moisture resistant glues and adhesives, as well as moisture...voir plus Glyoxal 40% is a colorless to pale yellow and transparent liquid which boils at 104°C. It is most widely used as a cross-linking agent in the production of permanent press resins for textiles, of moisture resistant glues and adhesives, as well as moisture resistant foundry binders. Glyoxal 40% is also used to improve the wet strength of paper and the moisture resistance of leather. voir moins | Request Sample |
| HN 336 ALUMINA TRIHYDRATE | Huber Engineered Materials | HN-336 is a halogen–free, medium particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, an...voir plus HN-336 is a halogen–free, medium particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-336 is recommended for spray-up or hand-lay up FRP applications, filament winding, panel production, resin injection, foam materials, cast polymer and epoxy parts, coatings, adhesives, latex, vinyl and urethane compounds. voir moins | |
| HN 36 ALUMINA TRIHYDRATE | Huber Engineered Materials | HN-36 is a halogen–free, medium-coarse particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading leve...voir plus HN-36 is a halogen–free, medium-coarse particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-36 is recommended for rubber goods, compression molded thermosets, coatings, adhesives, latex, vinyl and urethane compounds and carpet backings. voir moins | |
| HN 434 Alumina Trihydrate | Huber Engineered Materials | HN-434 is a halogen–free, fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and ...voir plus HN-434 is a halogen–free, fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-434 is recommended for spray-up or hand-lay up FRP applications, filament winding, panel production, resin injection, foam materials, cast polymer and epoxy parts, coatings, adhesives, latex, vinyl and urethane compounds. voir moins | |
| HN 532 Alumina Trihydrate | Huber Engineered Materials | HN-532 is a halogen–free, very fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels,...voir plus HN-532 is a halogen–free, very fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-532 is recommended for spray-up or hand lay-up FRP applications, filament winding, panel production, resin injection, foam materials, add cast polyester and epoxy parts, coatings, adhesives, latex, vinyl and urethane. voir moins | |
| Huberbrite® 10 Barium Sulfate | Huber Engineered Materials | Huberbrite® 10 is a high brightness, 10 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases sp...voir plus Huberbrite® 10 is a high brightness, 10 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases specific gravity and improves the chemical resistance of the surface coating. It can also be used as a corrosion protective additive in paints and coatings due to its weather resistant properties. voir moins | |
| Huberbrite® 7 Barium Sulfate | Huber Engineered Materials | Huberbrite® 7 is a high brightness, 7 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases spe...voir plus Huberbrite® 7 is a high brightness, 7 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases specific gravity and improves the chemical resistance of the surface coating. It can also be used as a corrosion protective additive in paints and coatings due to its weather resistant properties. voir moins | |
| Hubercarb® G 260 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G260 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® G260 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® G3 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® G3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® G325 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G325 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® G325 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® G35 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G35 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent...voir plus Hubercarb® G35 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® G35 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® G6 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent...voir plus Hubercarb® G6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® G6 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® G8 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G8 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® G8 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® G8 can also improve the physical and rheological properties of powder coatings. voir moins | |
| HUBERCARB® M200 CALCIUM CARBONATE | Huber Engineered Materials | Hubercarb® M200 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® M200 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. voir moins | |
| Hubercarb® M3 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® M3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® M3 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® M300 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M300 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® M300 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® M4 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M4 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® M4 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® M4 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® M6 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® M6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® M6 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® Q325 Calcium Carbonate | Huber Engineered Materials | Hubercarb® Q325 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® Q325 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® Q6 Calcium Carbonate | Huber Engineered Materials | Hubercarb® Q6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® Q6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® Q6 can also improve the physical and rheological properties of powder coatings. voir moins | |
| HYMOD® M1500 SPD TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M1500 SPD is a fine particle size, surface treated ATH product that provides functional reinforcement, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. Mechani...voir plus Hymod® M1500 SPD is a fine particle size, surface treated ATH product that provides functional reinforcement, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. Mechanical properties observed with Hymod® M1500 SPD are comparable to fine particle precipitated alumina trihydrate. voir moins | |
| Hymod® M632 SG TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M632 SG is a fine particle size, surface treated alumina trihydrate commonly known as aluminum hydroxide product that provides flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyo...voir plus Hymod® M632 SG is a fine particle size, surface treated alumina trihydrate commonly known as aluminum hydroxide product that provides flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this product to have low moisture and to be easily and uniformly dispersed into polymers at high loading levels without causing processing rheology concerns. Hymod® M632 SG can be used in such applications as foamed insulation, wire and cable jacketing, TPO roofing membranes, injection molded and extruded polyolefins, compression molded thermosets and solvent borne coatings. voir moins | |
| Hymod® M9400 SG TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M9400 SG is a precipitated, surface treated ATH product that provides flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this pr...voir plus Hymod® M9400 SG is a precipitated, surface treated ATH product that provides flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this product to have low moisture and to be easily and uniformly dispersed into polymers at high loading levels. Hymod® M9400 SG can be used in such applications as foamed insulation, wire and cable insulation and jacketing, injection molded and extruded polyolefins and solvent borne coatings. This product provides excellent processing characteristics as well as superior electrical and mechanical properties. voir moins | |
| HYMOD® M9400 SP TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M9400 SP aluminum hydroxide (ATH) is a vinyl- functionalized, precipitated grade developed for peroxide-cured silicone rubber. Everything about this product has been optimized for maximum performance in high-voltage, silicone rubber insulator compo...voir plus Hymod® M9400 SP aluminum hydroxide (ATH) is a vinyl- functionalized, precipitated grade developed for peroxide-cured silicone rubber. Everything about this product has been optimized for maximum performance in high-voltage, silicone rubber insulator compositions. Silicone rubber compound containing Hymod® M9400 SP does not stick in the mold. This increases the value of your compound to your customers. They will save money by reducing the number of rejected parts. voir moins | |
| Hymod® SB432 SG TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® SB432 SG is a medium particle size, surface treated ATH product that provides hydrophobicity, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modi...voir plus Hymod® SB432 SG is a medium particle size, surface treated ATH product that provides hydrophobicity, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this product to have low moisture and to be easily and uniformly dispersed into polymers at high loading levels without causing processing rheology concerns. voir moins | |
| KEMGARD® 911A MOLYBDATE COMPOUND | Huber Engineered Materials | Kemgard® 911A is a high efficiency calcium zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properti...voir plus Kemgard® 911A is a high efficiency calcium zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties and ensure better dispersion in the polymer matrix. Can be used in automotive and building applications where certain criteria for flame retardance is required. voir moins | |
| KEMGARD® 911B MOLYBDATE COMPOUND | Huber Engineered Materials | Kemgard® 911B is a high efficiency basic zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties...voir plus Kemgard® 911B is a high efficiency basic zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties and ensure better dispersion in the polymer matrix. Can be used in automotive and building applications where certain criteria for flame retardance is required. voir moins | |
| KEMGARD® 911C MOLYBDATE COMPOUND | Huber Engineered Materials | Kemgard® 911C is a high efficiency zinc molybdate-magnesium silicate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder fl...voir plus Kemgard® 911C is a high efficiency zinc molybdate-magnesium silicate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties and ensure better dispersion in the polymer matrix. Can be used in automotive and building applications where certain criteria for flame retardance is required. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Methyltriethoxysilane | Dalian Onichem Co., Ltd. | Methyltriethoxysilane is a colorless and transparent liquid which boils at 143°C. It is used to synthesize methyl silicone resins and water-proofing adhesives, to polymerize with other monomers to be special and high molecular compounds. Methyltriethoxysi...voir plus Methyltriethoxysilane is a colorless and transparent liquid which boils at 143°C. It is used to synthesize methyl silicone resins and water-proofing adhesives, to polymerize with other monomers to be special and high molecular compounds. Methyltriethoxysilane can also be used as a coupling agent for inorganic materials and as strengthening agent for laminated plastic products. voir moins | Request Sample |
| Methyltrimethoxysilane | Dalian Onichem Co., Ltd. | Methyltrimethoxysilane is a colorless and transparent liquid which boils at 102°C. It can be used to polymerize with other monomers to be special and high molecular compounds. Methyltrimethoxysilane can also be used as a cross-linking agent for RTV, as c...voir plus Methyltrimethoxysilane is a colorless and transparent liquid which boils at 102°C. It can be used to polymerize with other monomers to be special and high molecular compounds. Methyltrimethoxysilane can also be used as a cross-linking agent for RTV, as coupling agent for inorganic materials and as a strengthening agent for laminated plastic products. voir moins | Request Sample |
| MICRAL® 632 ALUMINA TRIHYDRATE | Huber Engineered Materials | Micral® 632 is a mechanically produced ATH product designed for plastic and rubber applications requiring a fine particle size. The high surface area of Micral 632 provides a low cost approach to flame retardance and smoke suppression in applications such...voir plus Micral® 632 is a mechanically produced ATH product designed for plastic and rubber applications requiring a fine particle size. The high surface area of Micral 632 provides a low cost approach to flame retardance and smoke suppression in applications such as urethane foams, vinyl, SBR belting, EPDM, EPR, adhesives, coatings, ABS, polyolefins and XPLE. A complete range of surface modifications is available to aid processing and enhance physical properties. These include silanes, stearates and wetting agents. voir moins | |
| Micral® AM550 ALUMINA TRIHYDRATE | Huber Engineered Materials | Micral® AM550 is a narrow particle size distribution flame retardant and smoke suppressant with a median particle size of about 5.5 microns which offers a lower surface area. Used in adhesive, caulk, sealant and paints and coating applications. | |
| N-Octyltrimethoxysilane | Dalian Onichem Co., Ltd. | N-Octyltrimethoxysilane is a colorless to pale yellow liquid which boils 75°C. It is high purity, undiluted Alkylalkoxysiloxane. When diluted with an appropriate solvent, this product can be used in the formulation of water repellent products. Upon proper...voir plus N-Octyltrimethoxysilane is a colorless to pale yellow liquid which boils 75°C. It is high purity, undiluted Alkylalkoxysiloxane. When diluted with an appropriate solvent, this product can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance. voir moins | Request Sample |
| N-Phenyl-3-Aminopropyltrimethoxysilane | Dalian Onichem Co., Ltd. | N-Phenyl-3-Aminopropyltrimethoxysilane is an adhesion promoter additive and coupling agent especially suited for SPUR. | Request Sample |
| N-Propyltriethoxysilane | Dalian Onichem Co., Ltd. | N-Propyltriethoxysilane is an alkyltrialkoxy silane. This product is an important component in sol-gel systems. | Request Sample |
| N-Propyltrimethoxysilane | Dalian Onichem Co., Ltd. | N-Propyltrimethoxysilane is an alkyltrialkoxy silane. This product is an important component in sol-gel systems. | Request Sample |
| Organosilane 2A301 | Dalian Onichem Co., Ltd. | Organosilane 2A301 is a biamine functional silane which acts as an adhesion promoter in isocyanate end-capped polyurethane polymers for sealant, adhesive and coating formulations. It is the best type of aminosilane for crosslinking plasticized PVC. This p...voir plus Organosilane 2A301 is a biamine functional silane which acts as an adhesion promoter in isocyanate end-capped polyurethane polymers for sealant, adhesive and coating formulations. It is the best type of aminosilane for crosslinking plasticized PVC. This product is suitable for use with acrylic, isocyanate, polyurethane, ABS, PVC, and styrene polymers. voir moins | Request Sample |
| Organosilane A301 | Dalian Onichem Co., Ltd. | Organosilane A301 is a colorless and transparent liquid which boils at 210°C. It is an amino-functional coupling agent that is used over a broad range of applications. Organosilane A301 provides superior bonds between inorganic substrates and organic poly...voir plus Organosilane A301 is a colorless and transparent liquid which boils at 210°C. It is an amino-functional coupling agent that is used over a broad range of applications. Organosilane A301 provides superior bonds between inorganic substrates and organic polymers by improving organics/inorganics reactivity and chemical bonding, especially for fiberglass reinforced composites. voir moins | Request Sample |
