| Bisomer® Amine D700 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® Amine D700 (77% aqueous dimethylaminohydroxy-propane solution) is a multifunctional amino alcohol additive for aqueous polymer systems. It forms an aqueous azeotrope that minimizes dry time and maximizes amine elimination. The surfactant effect o...voir plus Bisomer® Amine D700 (77% aqueous dimethylaminohydroxy-propane solution) is a multifunctional amino alcohol additive for aqueous polymer systems. It forms an aqueous azeotrope that minimizes dry time and maximizes amine elimination. The surfactant effect of Bisomer® Amine D700 provides enhanced pigment dispersion, wetting and flow with additional benefits for water-based system formulators. This product has a water content of 22-24%, an active matter of 74-77.5%, a colour number of 200 Pt/Co max., and a molecular weight of 103g/mol. voir moins | |
| Bisomer® BDDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (M...voir plus Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (MEHQ) content of 300-500ppm, a colour number of 100 Pt/Co max., a total polymerisable monomers amount of 99.0% min., and a molecular weight (av) of 226g/mol. Bisomer® BDDMA is an excellent reactive diluent in UV curable wood coatings due to its low viscosity. It is ideal in peroxide cured applications such as a co-agent for PP, PE, nitrile, EPDM rubbers and PVC. It offers excellent properties with PMMA, especially in acrylic flooring and synthetic marble. Bisomer® BDDMA is used in photopolymers, wire and cable coatings, adhesives and sealants. It also offers excellent compatibility with unsaturated polyesters for gel-coats, chemical fixings and anchor bolts. voir moins | |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...voir plus Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. voir moins | |
| Bisomer® C13MA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) ...voir plus Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) of > 99.0%, a molecular weight (av) of 268g/mol, and an inhibitor (MEHQ) content of 75-125ppm. It is extremely hydrophobic and offers a low Glass Transition Temperature (Tg), hence it is an excellent flexibilising co-monomer in adhesive and sealant applications. Bisomer® C13MA is a particularly useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants and high solids acrylic polyols for automotive coatings and industrial coatings. It offers a low viscosity and low odour combined with low shrinkage on polymerisation. voir moins | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resi...voir plus Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent in 2K adhesives and coatings. voir moins | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...voir plus Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. voir moins | |
| Bisomer® DALP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This pro...voir plus Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This product has an ester of 99% min., an iodine number of 196gl^2/100g min., and a density @ 20°C of 1.115 to 1.121kg/l. It may also be copolymerised with a variety of common monomers, or used as a “reactive diluent”. When used as a partial replacement for styrene in cross-linking polyesters, Bisomer® DALP produces materials showing up to 25% less shrinkage on cure. Bisomer® DALP may also be employed in self-priming PVC organosols for steel coating or incorporated into EPDM rubber to improve the adhesive strength. voir moins | |
| Bisomer® DEGDMA HI | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters...voir plus Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a refractive index @ 20°C of 1.455-1.460, a residual solvent amount of 0.8% max., and an inhibitor (MEHQ) content of 650-850ppm. It is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® DEGDMA HI is also excellent for use in the manufacture of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® DEGDMA HI offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins | |
| Bisomer® EP 100 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This ...voir plus Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 90-110mg KOH/g, an inhibitor (MEHQ) content of 90-120ppm, and a molecular weight (av) of 1114g/mol. Bisomer® EP100 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP100 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. voir moins | |
| Bisomer® EP 150 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, bo...voir plus Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, both ends of the chain are capped with 2 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 140-160mg KOH/g, an inhibitor (MEHQ) content of 70-100ppm, and a molecular weight (av) of 736g/mol. Bisomer® EP150 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP150 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. voir moins | |
| Bisomer® HEMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an...voir plus Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an inhibitor (MEHQ) content of 200-240ppm, and an acid number of < 1.0mg KOH/g. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. It may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HEMA is also the major raw material for the production of long-term wear and disposable contact lenses and in turn is an ideal starting point in formulating biomedical hydrogels. voir moins | |
| Bisomer® HEMA HP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...voir plus Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. voir moins | |
| Bisomer® HPMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. Thi...voir plus Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. This product has a molecular weight (av) 144g/mol, a diester (PGDMA) of 0.2% max., and a colour number of 10 Pt/Co max. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. Bisomer® HPMA may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HPMA is particularly useful as a hydrophobic hydroxy monomer in the production of vacuum impregnation sealants for cast aluminium components. It is also extensively used in the production of flexible, UV curable photopolymer printing plates. voir moins | |
| Bisomer® IDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. Th...voir plus Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. This product acidity (methacrylic acid) of 0.01% max., an inhibitor (MEHQ) content of 75-125ppm, and an assay (GC) of 97.0% min. Bisomer® IDMA is a useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants, high solids acrylic polyols for automotive coatings and industrial coatings. It offers low viscosity and low odour combined with low shrinkage on polymerisation. It is non-toxic, non-irritating and is not a suspected sensitiser. voir moins | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active ...voir plus Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active monomer of 97.0%. Bisomer® LMA is based on a natural form of lauryl alcohol; as C12 lauryl methacrylate the content is around 65-70 %. Bisomer® LMA is mostly used in the automotive industry for viscosity modification of lubricating oils. However, due to its hydrophobic nature and flexibilising properties, Bisomer® LMA is also extensively used in anaerobic adhesives, vacuum impregnation of aluminium castings, sealants and pressure sensitive adhesives (PSAs). voir moins | |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced ...voir plus Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced variation in properties such as viscosity, pigment wetting, chemical resistance, adhesion, hardness, sheer strength and tack. This product is a key raw material for the synthesis of high quality acrylic resins for a wide range of applications, including industrial coatings, printing inks and pressure sensitive adhesive applications. voir moins | |
| Bisomer® MPEG 350 MA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponific...voir plus Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponification value of 127-140mg KOH/g, an inhibitor (MEHQ) content of 0.45-0.55%, and a water content of 0.5% max. Bisomer® MPEG 350 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 350 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). voir moins | |
| Bisomer® MPEG 550 MA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecula...voir plus Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecular weight (av) of 628g/mol. Bisomer® MPEG 550 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 550 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). Bisomer® MPEG 550 MA is non-toxic and a liquid at ambient temperature. voir moins | |
| Bisomer® PEG 200 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsa...voir plus Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsaturated polyesters and especially acrylic polymers such as acrylic sheet and acrylic flooring. This product has an inhibitor (MEHQ) content of 300-500 ppm, an active monomer of 99.0%, and a molecular weight (ac) of 338g/mol. Bisomer® PEG 200 DMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and a non-irritant. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® PEG 200 DMA is also excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings and is also an essential component in many anaerobic adhesives and sealants. Bisomer® PEG 200 DMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins | |
| Bisomer® PEM6 LD | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties wh...voir plus Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers. This product has a hydroxul value of 145-165mg KOH/g, a molecular weigh (av) of 350g/mol, and an inhibitor (MEHQ) content of 500-800ppm. Bisomer® PEM6 LD is ideal in the preparation of hydrogels, wood impregnants, soil stabilisers and polyurethane dispersions (PUDs). It is also used extensively in the manufacture of more traditional acrylic polyols and urethane methacrylate oligomers for use in photo imaging applications such as printed circuit boards (PCBs) and dry film resists (DFRs). voir moins | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...voir plus Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. voir moins | |
| Bisomer® PPM5 LI | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g...voir plus Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g, a molecular weight (av) of 376g/mol, and an inhibitor (MEHQ) content of 300-500ppm. Bisomer PPM5 LI shows excellent properties in acrylic polyols for automotive OEM and refinish applications, especially flexibility and weathering properties. It is hydrophobic and offers a low Glass Transition Temperature (Tg) and low shrinkage on polymerisation. It is an excellent component in anaerobic adhesives, vacuum impregnation of aluminium castings and general sealants. This product is also a useful co-monomer in the production of vinyl, acrylic and styrene acrylic decorative paints. voir moins | |
| Bisomer® PTE | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular wei...voir plus Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular weight (av) of 217g/mol. Bisomer® PTE is an aromatic tertiary amine used as an amine activator for organic peroxide initiation, ideal for use in formulations using dibenzoyl peroxide (BPO). It has reduced toxicity. Bisomer® PTE is extensively used to activate MMA based acrylic resins, styrene-based unsaturated polyesters and vinyl ester methacrylate formulations. It is ideal in a wide range of applications, including acrylic flooring, adhesives, chemical fixings, road-marking paints, anchor bolts and chemical mortars. voir moins | |
| Bisomer® TEGDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of ...voir plus Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a total polymerisable monomers of 99% min., a molecular weight (av) of 286g/mol, and an inhibitor (MEHQ) content of 250-400ppm. Bisomer® TEGDMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and non-irritating. It is ideal in dibenzoyl peroxide (BPO) cured applications and excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® TEGDMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins | |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of wat...voir plus DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of water soluble resins. This product has a neutralization equivalent of 141.0 max., a decomposition temperature of 230°C, and a water insolubles amount of 50.0ppm max. The neopentyl structure of this trifunctional compound, having two primary hydroxyl groups and one tertiary carboxylic group, permits simplified processing by allowing the combining of all reactants in a single kettle charge. Good control of the reaction is possible due to the slower esterification rate of the tertiary carboxyl, assuring a uniform distribution of carboxyl groups along the resin backbone. The free acid group actively promotes resin water solubility or water dispersibility after neutralization with a base, easily introduces a polar group to improve coating adhesion and synthetic fiber dye receptivity, and increases the alkali solubility of deposited films. voir moins | |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA...voir plus DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA-0135 can be used to formulate high solids and NMP free polyurethane dispersions. It is a source of acid functionality for water-borne applications, is a co-resin to improve pigment wetting, dispersing and stabilizing. This product has an acid value of 100-115mg KOH/g, density @ 25°C of 1200-1235g/l, and a non-volatile content of 98% min. voir moins | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersio...voir plus DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersions. This product offers increased hydroxyl concentration, increased coating hardness and chemical resistance. It has low crystallinity and allows for ease of handling at lower temperatures. DMPA® Polyol HA-0135LV2 has a hydroxyl value of 330-345mg KOH/g, a density @ 25°C of 1170-1200g/l, a viscosity @ 25°C of 172 poise, and a colour content (APHA) of < 250 max. voir moins | |
| Geotex® FXT Calcium Carbonate | Huber Engineered Materials | Geotex® FXT is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties and high brightness. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology...voir plus Geotex® FXT is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties and high brightness. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology modifier. voir moins | |
| Geotex® FXZ Calcium Carbonate | Huber Engineered Materials | Geotex® FXZ is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology modifier. | |
| Geotex® TXS Calcium Carbonate | Huber Engineered Materials | Geotex® TXS is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties and high brightness. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology...voir plus Geotex® TXS is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties and high brightness. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology modifier. voir moins | |
| HN 336 ALUMINA TRIHYDRATE | Huber Engineered Materials | HN-336 is a halogen–free, medium particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, an...voir plus HN-336 is a halogen–free, medium particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-336 is recommended for spray-up or hand-lay up FRP applications, filament winding, panel production, resin injection, foam materials, cast polymer and epoxy parts, coatings, adhesives, latex, vinyl and urethane compounds. voir moins | |
| HN 36 ALUMINA TRIHYDRATE | Huber Engineered Materials | HN-36 is a halogen–free, medium-coarse particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading leve...voir plus HN-36 is a halogen–free, medium-coarse particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-36 is recommended for rubber goods, compression molded thermosets, coatings, adhesives, latex, vinyl and urethane compounds and carpet backings. voir moins | |
| HN 434 Alumina Trihydrate | Huber Engineered Materials | HN-434 is a halogen–free, fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and ...voir plus HN-434 is a halogen–free, fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-434 is recommended for spray-up or hand-lay up FRP applications, filament winding, panel production, resin injection, foam materials, cast polymer and epoxy parts, coatings, adhesives, latex, vinyl and urethane compounds. voir moins | |
| HN 532 Alumina Trihydrate | Huber Engineered Materials | HN-532 is a halogen–free, very fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels,...voir plus HN-532 is a halogen–free, very fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-532 is recommended for spray-up or hand lay-up FRP applications, filament winding, panel production, resin injection, foam materials, add cast polyester and epoxy parts, coatings, adhesives, latex, vinyl and urethane. voir moins | |
| Huberbrite® 10 Barium Sulfate | Huber Engineered Materials | Huberbrite® 10 is a high brightness, 10 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases sp...voir plus Huberbrite® 10 is a high brightness, 10 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases specific gravity and improves the chemical resistance of the surface coating. It can also be used as a corrosion protective additive in paints and coatings due to its weather resistant properties. voir moins | |
| Huberbrite® 7 Barium Sulfate | Huber Engineered Materials | Huberbrite® 7 is a high brightness, 7 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases spe...voir plus Huberbrite® 7 is a high brightness, 7 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases specific gravity and improves the chemical resistance of the surface coating. It can also be used as a corrosion protective additive in paints and coatings due to its weather resistant properties. voir moins | |
| Hubercarb® G 260 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G260 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® G260 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® G3 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® G3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® G325 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G325 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® G325 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® G35 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G35 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent...voir plus Hubercarb® G35 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® G35 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® G6 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent...voir plus Hubercarb® G6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® G6 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® G8 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G8 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® G8 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® G8 can also improve the physical and rheological properties of powder coatings. voir moins | |
| HUBERCARB® M200 CALCIUM CARBONATE | Huber Engineered Materials | Hubercarb® M200 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® M200 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. voir moins | |
| Hubercarb® M3 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® M3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® M3 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® M300 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M300 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® M300 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® M4 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M4 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® M4 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® M4 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® M6 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® M6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® M6 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® Q325 Calcium Carbonate | Huber Engineered Materials | Hubercarb® Q325 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® Q325 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® Q6 Calcium Carbonate | Huber Engineered Materials | Hubercarb® Q6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® Q6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® Q6 can also improve the physical and rheological properties of powder coatings. voir moins | |
| HYMOD® M1500 SPD TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M1500 SPD is a fine particle size, surface treated ATH product that provides functional reinforcement, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. Mechani...voir plus Hymod® M1500 SPD is a fine particle size, surface treated ATH product that provides functional reinforcement, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. Mechanical properties observed with Hymod® M1500 SPD are comparable to fine particle precipitated alumina trihydrate. voir moins | |
| Hymod® M632 SG TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M632 SG is a fine particle size, surface treated alumina trihydrate commonly known as aluminum hydroxide product that provides flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyo...voir plus Hymod® M632 SG is a fine particle size, surface treated alumina trihydrate commonly known as aluminum hydroxide product that provides flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this product to have low moisture and to be easily and uniformly dispersed into polymers at high loading levels without causing processing rheology concerns. Hymod® M632 SG can be used in such applications as foamed insulation, wire and cable jacketing, TPO roofing membranes, injection molded and extruded polyolefins, compression molded thermosets and solvent borne coatings. voir moins | |
| Hymod® M9400 SG TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M9400 SG is a precipitated, surface treated ATH product that provides flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this pr...voir plus Hymod® M9400 SG is a precipitated, surface treated ATH product that provides flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this product to have low moisture and to be easily and uniformly dispersed into polymers at high loading levels. Hymod® M9400 SG can be used in such applications as foamed insulation, wire and cable insulation and jacketing, injection molded and extruded polyolefins and solvent borne coatings. This product provides excellent processing characteristics as well as superior electrical and mechanical properties. voir moins | |
| HYMOD® M9400 SP TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M9400 SP aluminum hydroxide (ATH) is a vinyl- functionalized, precipitated grade developed for peroxide-cured silicone rubber. Everything about this product has been optimized for maximum performance in high-voltage, silicone rubber insulator compo...voir plus Hymod® M9400 SP aluminum hydroxide (ATH) is a vinyl- functionalized, precipitated grade developed for peroxide-cured silicone rubber. Everything about this product has been optimized for maximum performance in high-voltage, silicone rubber insulator compositions. Silicone rubber compound containing Hymod® M9400 SP does not stick in the mold. This increases the value of your compound to your customers. They will save money by reducing the number of rejected parts. voir moins | |
| Hymod® SB432 SG TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® SB432 SG is a medium particle size, surface treated ATH product that provides hydrophobicity, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modi...voir plus Hymod® SB432 SG is a medium particle size, surface treated ATH product that provides hydrophobicity, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this product to have low moisture and to be easily and uniformly dispersed into polymers at high loading levels without causing processing rheology concerns. voir moins | |
| KEMGARD® 911A MOLYBDATE COMPOUND | Huber Engineered Materials | Kemgard® 911A is a high efficiency calcium zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properti...voir plus Kemgard® 911A is a high efficiency calcium zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties and ensure better dispersion in the polymer matrix. Can be used in automotive and building applications where certain criteria for flame retardance is required. voir moins | |
| KEMGARD® 911B MOLYBDATE COMPOUND | Huber Engineered Materials | Kemgard® 911B is a high efficiency basic zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties...voir plus Kemgard® 911B is a high efficiency basic zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties and ensure better dispersion in the polymer matrix. Can be used in automotive and building applications where certain criteria for flame retardance is required. voir moins | |
| KEMGARD® 911C MOLYBDATE COMPOUND | Huber Engineered Materials | Kemgard® 911C is a high efficiency zinc molybdate-magnesium silicate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder fl...voir plus Kemgard® 911C is a high efficiency zinc molybdate-magnesium silicate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties and ensure better dispersion in the polymer matrix. Can be used in automotive and building applications where certain criteria for flame retardance is required. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| MICRAL® 632 ALUMINA TRIHYDRATE | Huber Engineered Materials | Micral® 632 is a mechanically produced ATH product designed for plastic and rubber applications requiring a fine particle size. The high surface area of Micral 632 provides a low cost approach to flame retardance and smoke suppression in applications such...voir plus Micral® 632 is a mechanically produced ATH product designed for plastic and rubber applications requiring a fine particle size. The high surface area of Micral 632 provides a low cost approach to flame retardance and smoke suppression in applications such as urethane foams, vinyl, SBR belting, EPDM, EPR, adhesives, coatings, ABS, polyolefins and XPLE. A complete range of surface modifications is available to aid processing and enhance physical properties. These include silanes, stearates and wetting agents. voir moins | |
| Micral® AM550 ALUMINA TRIHYDRATE | Huber Engineered Materials | Micral® AM550 is a narrow particle size distribution flame retardant and smoke suppressant with a median particle size of about 5.5 microns which offers a lower surface area. Used in adhesive, caulk, sealant and paints and coating applications. | |
| SB 336 ALUMINA TRIHYDRATE | Huber Engineered Materials | SB-336 is a medium particle size ATH product that provides low cost flame retardancy and smoke suppression in a variety of applications. The unique particle size is specifically designed for low viscosites, high filler loading levels, and excellent proces...voir plus SB-336 is a medium particle size ATH product that provides low cost flame retardancy and smoke suppression in a variety of applications. The unique particle size is specifically designed for low viscosites, high filler loading levels, and excellent processing characteristics. SB-336 is recommended for spray-up or hand lay-up FRP applications, filament winding, panel production, resin injection, SMC/BMC, foam materials, and cast polyester and epoxy parts. voir moins | |
| SB 36 ALUMINA TRIHYDRATE | Huber Engineered Materials | SB-36 is a coarse, mechanically ground alumina trihydrate used to suppress flame and smoke in applications such as latex, vinyl and urethane compounds. | |
| SB 432 ALUMINA TRIHYDRATE | Huber Engineered Materials | SB-432 was developed especially for SMC, BMC, resin injection and high solids coatings, has a unique particle size distribution that provides the best possible combination of viscosity, flame, electrical and molding properties that can be derived from an ...voir plus SB-432 was developed especially for SMC, BMC, resin injection and high solids coatings, has a unique particle size distribution that provides the best possible combination of viscosity, flame, electrical and molding properties that can be derived from an ATH filler. A closely controlled top size with a large super fine faction yields rapid dispersion in resin. Excellent mold flow and wet-out characteristics result in superior surface profile, minimal porosity, even pigmentation, and excellent filler and reinforcement distribution throughout the molded part. voir moins | |
| TRI-REZ® Polyol 1030-60 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1030-60 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-60 makes it an ideal polyol for...voir plus TRI-REZ® Polyol 1030-60 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-60 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product has a viscosity (Brookfield @ 25°C) of 40-60P, a moisture content of 0.05% max., and a hydroxyl number (as supplied) of 57-63mg KOH/g. voir moins | |
| TRI-REZ® Polyol 1030-90 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1030-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-90 makes it an ideal polyol for...voir plus TRI-REZ® Polyol 1030-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-90 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product has an acid value (as supplied) of 0.8mg KOH/g max., a viscosity (Brookfield @ 25°C (as supplied)) of 15-30 Poise, and a colour (APHA) of 250 max. voir moins | |
| TRI-REZ® Polyol 1220A-300 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids ...voir plus TRI-REZ® Polyol 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids polyurethane coatings and elastomers that require excellent UV and chemical resistance properties. voir moins | |
| TRI-REZ® Polyol 1230-60 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1230-60 Polyester Resin is a non-crystalline saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-60 makes it an ideal polyol for formulating h...voir plus TRI-REZ® Polyol 1230-60 Polyester Resin is a non-crystalline saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-60 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product is a clear, viscous liquid, with a density (pounds / gallon @ 25°C) of 9.3 +/- 0.3, a moisture content of 0.05 max., viscosity (Brookfield @ 25°C (as supplied)) of 300-500P, and a hydroxyl number (as supplied) of 57-63mg KOH/g. voir moins | |
| TRI-REZ® Polyol 1230-90 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1230-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-90 makes it an ideal polyol for...voir plus TRI-REZ® Polyol 1230-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-90 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product is a clear, viscous liquid, with an acid value (as supplied) of 0.8mg KOH/g max., a hydroxyl content (as supplied) of 87-93mg KOH/g, and a viscosity (Brookfield @ 25°C (as supplied)) of 100-200P. voir moins |
