| Airase® 4500 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Airase® 4500 Defoamer is a proprietary organic oil defoamer designed to control and typically eliminate foam, pinholes and entrapped air in waterbased inks, adhesives and coatings without generating surface defects. It does not contain added mineral oils,...voir plus Airase® 4500 Defoamer is a proprietary organic oil defoamer designed to control and typically eliminate foam, pinholes and entrapped air in waterbased inks, adhesives and coatings without generating surface defects. It does not contain added mineral oils, hazardous air pollutants (HAPs), or alkyl phenol ethoxylates (APEs). voir moins | |
| Airase® 5700 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Airase® 5700 Defoamer is a structured siloxane defoamer line (SSDL) defoamer - a member of aline of products that spans the application space from strong defoaming to high compatibility. Airase® 5700 Defoamer is a formulated product that contains no adde...voir plus Airase® 5700 Defoamer is a structured siloxane defoamer line (SSDL) defoamer - a member of aline of products that spans the application space from strong defoaming to high compatibility. Airase® 5700 Defoamer is a formulated product that contains no added solvent, HAPs, or alkylphenol ethoxylates. This siloxane-based defoamer was developed for use in a wide range of water-based applications. Airase® 5700 Defoamer is formulated for incorporation in the let-down of a coating or ink. Airase® 5700 Defoamer can provide an excellent balance of effective defoaming and film compatibility. voir moins | |
| Carbowet® 138 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment...voir plus Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment wetting and perform in a wide range of applications. voir moins | |
| Carbowet® GA-211 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment w...voir plus Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment wetting and deaeration and optimal milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-211 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Carbowet® GA-211 surfactant offers low foam and strong dynamic wetting properties. voir moins | |
| Carbowet® GA-221 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment w...voir plus Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment wetting and deaeration and optimizes milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-221 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Compared to related products, Carbowet® GA-221 surfactant offers the most stabilization benefits and is a first choice for organic and carbon black pigment dispersions. voir moins | |
| DYNOL™ 604 Surfactant | Evonik Operations GmbH, BL Interface & Performance | DYNOL™ 604 Surfactant is a low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants...voir plus DYNOL™ 604 Surfactant is a low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants. voir moins | |
| Dynol™ 607 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Dynol™ 607 surfactant has been developed to meet the growing need for high performance and cost effective surfactants. It provides a unique balance of properties for a wide range of waterbased industrial applications compared with traditional surfactants ...voir plus Dynol™ 607 surfactant has been developed to meet the growing need for high performance and cost effective surfactants. It provides a unique balance of properties for a wide range of waterbased industrial applications compared with traditional surfactants such as fluorosurfactants and silicones. Dynol™ 607 applications may include, coatings, graphic arts, adhesives, latex dipping, dye and pigment synthesis, pigment grinding, metalworking fluids, waste water treatment and more. voir moins | |
| Dynol™ 980 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Dynol™ 980 superwetting surfactant is an optimized siloxane-based surfactant providing good equilibrium and dynamic surface tension reduction in a wide range of aqueous formulations. Designed to provide superwetting on difficult-to-wet substrates, it offe...voir plus Dynol™ 980 superwetting surfactant is an optimized siloxane-based surfactant providing good equilibrium and dynamic surface tension reduction in a wide range of aqueous formulations. Designed to provide superwetting on difficult-to-wet substrates, it offers superior substrate wetting with low foam and excellent compatibility. The characteristics of Dynol™ 980 surfactant enable exceptional performance in waterborne wood coatings and overprint varnishes. This product can also provide good flow and leveling under diverse application conditions. voir moins | |
| Geotex® FXT Calcium Carbonate | Huber Engineered Materials | Geotex® FXT is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties and high brightness. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology...voir plus Geotex® FXT is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties and high brightness. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology modifier. voir moins | |
| Geotex® FXZ Calcium Carbonate | Huber Engineered Materials | Geotex® FXZ is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology modifier. | |
| Geotex® TXS Calcium Carbonate | Huber Engineered Materials | Geotex® TXS is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties and high brightness. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology...voir plus Geotex® TXS is a high purity, coarse particle size calcium carbonate that has consistent typical physical properties and high brightness. It is commonly used in a number of paint and coating applications such as an extender, anti-slip additive or rheology modifier. voir moins | |
| HN 336 ALUMINA TRIHYDRATE | Huber Engineered Materials | HN-336 is a halogen–free, medium particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, an...voir plus HN-336 is a halogen–free, medium particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-336 is recommended for spray-up or hand-lay up FRP applications, filament winding, panel production, resin injection, foam materials, cast polymer and epoxy parts, coatings, adhesives, latex, vinyl and urethane compounds. voir moins | |
| HN 36 ALUMINA TRIHYDRATE | Huber Engineered Materials | HN-36 is a halogen–free, medium-coarse particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading leve...voir plus HN-36 is a halogen–free, medium-coarse particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-36 is recommended for rubber goods, compression molded thermosets, coatings, adhesives, latex, vinyl and urethane compounds and carpet backings. voir moins | |
| HN 434 Alumina Trihydrate | Huber Engineered Materials | HN-434 is a halogen–free, fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and ...voir plus HN-434 is a halogen–free, fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-434 is recommended for spray-up or hand-lay up FRP applications, filament winding, panel production, resin injection, foam materials, cast polymer and epoxy parts, coatings, adhesives, latex, vinyl and urethane compounds. voir moins | |
| HN 532 Alumina Trihydrate | Huber Engineered Materials | HN-532 is a halogen–free, very fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels,...voir plus HN-532 is a halogen–free, very fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-532 is recommended for spray-up or hand lay-up FRP applications, filament winding, panel production, resin injection, foam materials, add cast polyester and epoxy parts, coatings, adhesives, latex, vinyl and urethane. voir moins | |
| Huberbrite® 10 Barium Sulfate | Huber Engineered Materials | Huberbrite® 10 is a high brightness, 10 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases sp...voir plus Huberbrite® 10 is a high brightness, 10 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases specific gravity and improves the chemical resistance of the surface coating. It can also be used as a corrosion protective additive in paints and coatings due to its weather resistant properties. voir moins | |
| Huberbrite® 7 Barium Sulfate | Huber Engineered Materials | Huberbrite® 7 is a high brightness, 7 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases spe...voir plus Huberbrite® 7 is a high brightness, 7 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases specific gravity and improves the chemical resistance of the surface coating. It can also be used as a corrosion protective additive in paints and coatings due to its weather resistant properties. voir moins | |
| Hubercarb® G 260 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G260 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® G260 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® G3 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® G3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® G325 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G325 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® G325 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® G35 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G35 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent...voir plus Hubercarb® G35 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® G35 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® G6 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent...voir plus Hubercarb® G6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® G6 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® G8 Calcium Carbonate | Huber Engineered Materials | Hubercarb® G8 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® G8 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® G8 can also improve the physical and rheological properties of powder coatings. voir moins | |
| HUBERCARB® M200 CALCIUM CARBONATE | Huber Engineered Materials | Hubercarb® M200 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® M200 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. voir moins | |
| Hubercarb® M3 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® M3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® M3 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® M300 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M300 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® M300 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® M4 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M4 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® M4 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® M4 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® M6 Calcium Carbonate | Huber Engineered Materials | Hubercarb® M6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® M6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® M6 can also improve the physical and rheological properties of powder coatings. voir moins | |
| Hubercarb® Q325 Calcium Carbonate | Huber Engineered Materials | Hubercarb® Q325 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whiteni...voir plus Hubercarb® Q325 is a high purity, medium fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. voir moins | |
| Hubercarb® Q6 Calcium Carbonate | Huber Engineered Materials | Hubercarb® Q6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent....voir plus Hubercarb® Q6 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is widely used in adhesive, caulk and sealant applications as a rheology modifier, cost-reducing filler, opacifier and/or whitening agent. In paints and coating applications it is commonly used as an extender, anti-slip additive or rheology modifier. Hubercarb® Q6 can also improve the physical and rheological properties of powder coatings. voir moins | |
| HYMOD® M1500 SPD TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M1500 SPD is a fine particle size, surface treated ATH product that provides functional reinforcement, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. Mechani...voir plus Hymod® M1500 SPD is a fine particle size, surface treated ATH product that provides functional reinforcement, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. Mechanical properties observed with Hymod® M1500 SPD are comparable to fine particle precipitated alumina trihydrate. voir moins | |
| Hymod® M632 SG TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M632 SG is a fine particle size, surface treated alumina trihydrate commonly known as aluminum hydroxide product that provides flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyo...voir plus Hymod® M632 SG is a fine particle size, surface treated alumina trihydrate commonly known as aluminum hydroxide product that provides flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this product to have low moisture and to be easily and uniformly dispersed into polymers at high loading levels without causing processing rheology concerns. Hymod® M632 SG can be used in such applications as foamed insulation, wire and cable jacketing, TPO roofing membranes, injection molded and extruded polyolefins, compression molded thermosets and solvent borne coatings. voir moins | |
| Hymod® M9400 SG TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M9400 SG is a precipitated, surface treated ATH product that provides flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this pr...voir plus Hymod® M9400 SG is a precipitated, surface treated ATH product that provides flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this product to have low moisture and to be easily and uniformly dispersed into polymers at high loading levels. Hymod® M9400 SG can be used in such applications as foamed insulation, wire and cable insulation and jacketing, injection molded and extruded polyolefins and solvent borne coatings. This product provides excellent processing characteristics as well as superior electrical and mechanical properties. voir moins | |
| HYMOD® M9400 SP TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M9400 SP aluminum hydroxide (ATH) is a vinyl- functionalized, precipitated grade developed for peroxide-cured silicone rubber. Everything about this product has been optimized for maximum performance in high-voltage, silicone rubber insulator compo...voir plus Hymod® M9400 SP aluminum hydroxide (ATH) is a vinyl- functionalized, precipitated grade developed for peroxide-cured silicone rubber. Everything about this product has been optimized for maximum performance in high-voltage, silicone rubber insulator compositions. Silicone rubber compound containing Hymod® M9400 SP does not stick in the mold. This increases the value of your compound to your customers. They will save money by reducing the number of rejected parts. voir moins | |
| Hymod® SB432 SG TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® SB432 SG is a medium particle size, surface treated ATH product that provides hydrophobicity, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modi...voir plus Hymod® SB432 SG is a medium particle size, surface treated ATH product that provides hydrophobicity, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this product to have low moisture and to be easily and uniformly dispersed into polymers at high loading levels without causing processing rheology concerns. voir moins | |
| KEMGARD® 911A MOLYBDATE COMPOUND | Huber Engineered Materials | Kemgard® 911A is a high efficiency calcium zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properti...voir plus Kemgard® 911A is a high efficiency calcium zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties and ensure better dispersion in the polymer matrix. Can be used in automotive and building applications where certain criteria for flame retardance is required. voir moins | |
| KEMGARD® 911B MOLYBDATE COMPOUND | Huber Engineered Materials | Kemgard® 911B is a high efficiency basic zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties...voir plus Kemgard® 911B is a high efficiency basic zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties and ensure better dispersion in the polymer matrix. Can be used in automotive and building applications where certain criteria for flame retardance is required. voir moins | |
| KEMGARD® 911C MOLYBDATE COMPOUND | Huber Engineered Materials | Kemgard® 911C is a high efficiency zinc molybdate-magnesium silicate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder fl...voir plus Kemgard® 911C is a high efficiency zinc molybdate-magnesium silicate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties and ensure better dispersion in the polymer matrix. Can be used in automotive and building applications where certain criteria for flame retardance is required. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| MICRAL® 632 ALUMINA TRIHYDRATE | Huber Engineered Materials | Micral® 632 is a mechanically produced ATH product designed for plastic and rubber applications requiring a fine particle size. The high surface area of Micral 632 provides a low cost approach to flame retardance and smoke suppression in applications such...voir plus Micral® 632 is a mechanically produced ATH product designed for plastic and rubber applications requiring a fine particle size. The high surface area of Micral 632 provides a low cost approach to flame retardance and smoke suppression in applications such as urethane foams, vinyl, SBR belting, EPDM, EPR, adhesives, coatings, ABS, polyolefins and XPLE. A complete range of surface modifications is available to aid processing and enhance physical properties. These include silanes, stearates and wetting agents. voir moins | |
| Micral® AM550 ALUMINA TRIHYDRATE | Huber Engineered Materials | Micral® AM550 is a narrow particle size distribution flame retardant and smoke suppressant with a median particle size of about 5.5 microns which offers a lower surface area. Used in adhesive, caulk, sealant and paints and coating applications. | |
| Polymer ST 48 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the applic...voir plus Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the application as sealant for interior or exterior joints, e.g. expansion or connection joints, interior joints for dry walling, joints at staircases. voir moins | |
| Polymer ST 61 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high ...voir plus Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high elasticity. voir moins | |
| Polymer ST 61 LV | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 61 LV is a plasticizer-free product which addresses the same formulation properties as Polymer ST 61. Its viscosity is approx. 70 % less, thus it allows quicker dosing, lower formulation viscosities and higher possible filler loading levels. | |
| Polymer ST 77 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assemb...voir plus Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assembly of superstructural parts, bumpers, etc. Mechanical fastening is often avoided as it could cause damage to the materials used. In addition, it could negatively affect the design. voir moins | |
| Polymer ST 80 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 80 is a high quality binder for adhesive formulations where high bonding strength and high surface hardness after curing are required. | |
| Polymer ST 81 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 81 does not contain plasticizers, it offers a large variability in formulation design. It allows the formulation of both tin- and phthalate-free products. It allows formulators to enter markets such as wood construction, transport and automotiv...voir plus Polymer ST 81 does not contain plasticizers, it offers a large variability in formulation design. It allows the formulation of both tin- and phthalate-free products. It allows formulators to enter markets such as wood construction, transport and automotive, assembly as well as light-weight construction. voir moins | |
| SB 336 ALUMINA TRIHYDRATE | Huber Engineered Materials | SB-336 is a medium particle size ATH product that provides low cost flame retardancy and smoke suppression in a variety of applications. The unique particle size is specifically designed for low viscosites, high filler loading levels, and excellent proces...voir plus SB-336 is a medium particle size ATH product that provides low cost flame retardancy and smoke suppression in a variety of applications. The unique particle size is specifically designed for low viscosites, high filler loading levels, and excellent processing characteristics. SB-336 is recommended for spray-up or hand lay-up FRP applications, filament winding, panel production, resin injection, SMC/BMC, foam materials, and cast polyester and epoxy parts. voir moins | |
| SB 36 ALUMINA TRIHYDRATE | Huber Engineered Materials | SB-36 is a coarse, mechanically ground alumina trihydrate used to suppress flame and smoke in applications such as latex, vinyl and urethane compounds. | |
| SB 432 ALUMINA TRIHYDRATE | Huber Engineered Materials | SB-432 was developed especially for SMC, BMC, resin injection and high solids coatings, has a unique particle size distribution that provides the best possible combination of viscosity, flame, electrical and molding properties that can be derived from an ...voir plus SB-432 was developed especially for SMC, BMC, resin injection and high solids coatings, has a unique particle size distribution that provides the best possible combination of viscosity, flame, electrical and molding properties that can be derived from an ATH filler. A closely controlled top size with a large super fine faction yields rapid dispersion in resin. Excellent mold flow and wet-out characteristics result in superior surface profile, minimal porosity, even pigmentation, and excellent filler and reinforcement distribution throughout the molded part. voir moins | |
| SURFYNOL® 104 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® 104 surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104 surfactant is a nonionic molecule containing ...voir plus SURFYNOL® 104 surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104 surfactant is a nonionic molecule containing a hydrophilic portion in the middle of two symmetrical hydrophobic groups. Its unique chemical structure allows this product to provide multifunctional properties such as surface tension reduction, foam control and viscosity stabilization. voir moins | |
| SURFYNOL® 104A | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® 104A surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104A surfactant is a nonionic molecule containing...voir plus SURFYNOL® 104A surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104A surfactant is a nonionic molecule containing a hydrophilic portion in the middle of two symmetrical hydrophobic groups. Its unique chemical structure allows this product to provide multifunctional properties such as surface tension reduction, foam control and viscosity stabilization. voir moins | |
| SURFYNOL® 104BC | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in 2-Butoxyethanol. | |
| SURFYNOL® 104DPM | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Dipropylene Glycol Monomethyl Ether. | |
| SURFYNOL® 104E | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Ethylene Glycol. | |
| SURFYNOL® 104H SURFACTANT | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 75% active liquid in Ethylene Glycol. | |
| SURFYNOL® 104PA | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Isopropyl Alcohol. | |
| SURFYNOL® 104PG-50 | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Propylene Glycol. | |
| SURFYNOL® 104S | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 46% active powder on Amorphous Silica. | |
| Surfynol® 107 L | Evonik Operations GmbH, BL Interface & Performance | Surfynol® 107 L is a low-viscosity surfactant that provides substratre wetting and defoaming properties. It also acts as coalescing aid. | |
| SURFYNOL® 2502 | Evonik Operations GmbH, BL Interface & Performance | An ethoxylated/propoxylated acetylenic-based surfactant that provides specific performance benefits in a broad range of water-based systems. 100% active liquid. | |
| SURFYNOL® 420 | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that functions both as a wetting agent and foam control agent. 100% active liquid with an HLB of 4. | |
| SURFYNOL® 440 | Evonik Operations GmbH, BL Interface & Performance | A nonfoaming, nonionic surfactant that is employed for substrate wetting. 100% active liquid with an HLB of 8. | |
| SURFYNOL® 465 | Evonik Operations GmbH, BL Interface & Performance | A nonionic, low-foaming surfactant that is utilized for its wetting and slight emulsification properties. It has a high cloud point for utilization in high-temperature systems. 100% active liquid with an HLB of 13. | |
| SURFYNOL® 485W | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that functions as a wetting agent and has slight emulsification properties. 75% active liquid with an HLB of 17. | |
| SURFYNOL® 82 | Evonik Operations GmbH, BL Interface & Performance | This is a 95% Dimethyl Octynediol surfactant. | |
| SURFYNOL® CT-131 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® CT-131 is a solvent-free, low-foaming pigment grind aid designed for use in aqueous systems. | |
| SURFYNOL® CT-171 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® CT-171 is a solvent-free anionic/nonionic grind aid designed to provide both effective pigment wetting and dispersing characteristics for many types of organic pigments. | |
| Surfynol® DF-110 D | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF 110 D is a very compatible molecular defoamer basedon Gemini surfactant technology. Free of silicone and silica. Offers additional dynamic wetting properties. | |
| Surfynol® DF-110BC Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surfa...voir plus Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surface defects. voir moins | |
| SURFYNOL® DF-110L | Evonik Operations GmbH, BL Interface & Performance | Surfynol DF-110C, Surfynol DF-110D, and Surfynol DF-110L molecular defoamers are highly effective, non-ionic organic products. They do not contain silicone, silica or fluoro products. These three defoaming/de-air entraining agents are useful for a wide ...voir plus Surfynol DF-110C, Surfynol DF-110D, and Surfynol DF-110L molecular defoamers are highly effective, non-ionic organic products. They do not contain silicone, silica or fluoro products. These three defoaming/de-air entraining agents are useful for a wide variety of applications where foam prevention or foam elimination is nescessary without causing surface defects. voir moins | |
| Surfynol® DF-178 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-178 Defoamer is a formulated defoamer and de-aerator that provides strong defoaming and microfoam control and is particularly effective in spray applications. It is a liquid, 100% active, silicone-based product developed specifically for appl...voir plus Surfynol® DF-178 Defoamer is a formulated defoamer and de-aerator that provides strong defoaming and microfoam control and is particularly effective in spray applications. It is a liquid, 100% active, silicone-based product developed specifically for applications in water-borne coatings and graphic arts that demand both powerful defoaming and defect-free surfaces. voir moins | |
| Surfynol® DF-220 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-220 Defoamer is a 100% active, silicone-free, silica-free, and alkylphenol ethoxylate (APE)-free organic defoamer that can provide not only high initial efficacy, but also long term sustained defoaming. It is a clear, low viscosity liquid tha...voir plus Surfynol® DF-220 Defoamer is a 100% active, silicone-free, silica-free, and alkylphenol ethoxylate (APE)-free organic defoamer that can provide not only high initial efficacy, but also long term sustained defoaming. It is a clear, low viscosity liquid that has been specifically designed to be used in a variety of water-based formulations, including printing inks, coatings and adhesives. voir moins | |
| SURFYNOL® DF-37 | Evonik Operations GmbH, BL Interface & Performance | A nonionic, acetylenic-based defoamer which promotes foam control as well as surface wetting. 100% active liquid. | |
| SURFYNOL® DF-37 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A nonionic, acetylenic-based defoamer which promotes foam control as well as surface wetting. A unique additive designed to minimize web formation during latex glove and waterborne coating dipping processes. | |
| SURFYNOL® DF-58 | Evonik Operations GmbH, BL Interface & Performance | A silicone-based foam control agent useful in aqueous systems. The product has strong foam control and deairation performance. 100% active liquid. | |
| SURFYNOL® DF-58 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A silicone-based foam control agent useful in aqueous systems. It has strong foam control and deairation performance. Developed for use in water-based coating and ink formulations where strong, rapid defoaming is required. 100% active liquid. | |
| SURFYNOL® DF-62 | Evonik Operations GmbH, BL Interface & Performance | An ether-modified polysiloxane-based defoamer designed to provide excellent knockdown defoaming and sustained antifoaming over time. 100% active liquid. | |
| SURFYNOL® DF-62 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | Ether-modified, silicone defoamer designed to provide excellent knockdown defoaming and sustained antifoaming over time in a variety of waterborne formulations. Useful when long-term defoamer efficacy is needed. 100% active liquid. | |
| SURFYNOL® DF-66 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A liquid, acetylenic-modified polysiloxane-based emulsion defoamer which provides excellent balance of initial knockdown and sustained defoaming with no detrimental effects. Designed for use in aqueous ink and coating systems. 46% active liquid. | |
| SURFYNOL® DF-695 | Evonik Operations GmbH, BL Interface & Performance | A silicone emulsion defoamer, which provides initial and sustained defoaming performance in water-based formulations. 100% active liquid. | |
| SURFYNOL® DF-695 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A silicone-based emulsion defoamer designed for use in aqueous ink systems. It is recommended for use in grinding and dispersion as well as letdown applications. 100% active liquid. | |
| SURFYNOL® MD-600S | Evonik Operations GmbH, BL Interface & Performance | This is a highly effective powder product designed to eliminate air entrapment in cementitious-based products for the construction industry. It allows for fast-acting defoaming with long-lasting deaeration, at a molecular level. It also ensures the fast...voir plus This is a highly effective powder product designed to eliminate air entrapment in cementitious-based products for the construction industry. It allows for fast-acting defoaming with long-lasting deaeration, at a molecular level. It also ensures the fast escape of air entrapped while incorporating water and during mixing. voir moins | |
| Surfynol® MD20 | Evonik Operations GmbH, BL Interface & Performance | Surfynol® MD20 is a 100% active, nonsilicone, liquid product based on Gemini Surfactant Technology. This multifunctional defoamer provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minim...voir plus Surfynol® MD20 is a 100% active, nonsilicone, liquid product based on Gemini Surfactant Technology. This multifunctional defoamer provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Additional advantages of Surfynol® MD20 include, long-lasting defoamer efficacy, ease of incorporation and good compatibility without separation, synergestic with typical wetting agents, eliminates microfoam, wide compounding latitude, solvent-free and temperature and pH stable (pH 1-13). voir moins | |
| SURFYNOL® PSA-336 | Evonik Operations GmbH, BL Interface & Performance | A powerful solvent-free wetting agent with moderate foaming tendencies. | |
| SURFYNOL® SE | Evonik Operations GmbH, BL Interface & Performance | A nonionic defoaming surfactant which can act as a highly effective wetting agent, defoamer and viscosity stabilizer and often performs more than one of these functions in combination. 80% active liquid with an HLB of 4-5. | |
| SURFYNOL® SE-F | Evonik Operations GmbH, BL Interface & Performance | A nonionic self-emulsifiable surfactant that will reduce surface tension and control foam. 80% active liquid with an HLB of 4-5. | |
| TEGOPAC® Bond 150 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 150 is recommended for usage as a binder in assembly adhesives and sealant formulations. The combination of outstanding through-cure and excellent elastic recovery properties allows formulations with TEGOPAC® Bond 150 to be used in a number ...voir plus TEGOPAC® Bond 150 is recommended for usage as a binder in assembly adhesives and sealant formulations. The combination of outstanding through-cure and excellent elastic recovery properties allows formulations with TEGOPAC® Bond 150 to be used in a number of demanding applications, e.g. in construction of sandwich elements, for flexible bonding in transport applications or for high quality expansion joints. voir moins | |
| TEGOPAC® Bond 160 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 160 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 160 shows excellent through cure properties,...voir plus TEGOPAC® Bond 160 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 160 shows excellent through cure properties, improved water & thermal resistance and excellent elastic recovery properties. The low polymer viscosity allows quick & easy handling. voir moins | |
| TEGOPAC® Bond 170 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 170 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 170 shows excellent through cure properties,...voir plus TEGOPAC® Bond 170 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 170 shows excellent through cure properties, improved water & thermal resistance and excellent elastic recovery properties. The low polymer viscosity allows quick & easy handling. voir moins | |
| TEGOPAC® Bond 251 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 251 is a hybrid polymer with a modified backbone that contains hydrophilic segments. Formulations with TEGOPAC® Bond 251 are suitable to replace flexible PUR adhesives and sealants. | |
| TEGOPAC® RD 1 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...voir plus TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. voir moins | |
| TEGOPAC® RD 2 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...voir plus TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. voir moins | |
| TEGOPAC® Seal 100 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Seal 100 is a moisture curing silane-modified polymer recommended for low modulus sealant formulations which are used in construction applications (e.g. for façades, expansion joints, etc. ) or for indoor applications. TEGOPAC® Seal 100 is also ...voir plus TEGOPAC® Seal 100 is a moisture curing silane-modified polymer recommended for low modulus sealant formulations which are used in construction applications (e.g. for façades, expansion joints, etc. ) or for indoor applications. TEGOPAC® Seal 100 is also recommended for use in sealant and adhesive formulations where vibration and sound dampening is an issue. voir moins | |
| ZetaSperse® 170 Dispersant | Evonik Operations GmbH, BL Interface & Performance | ZetaSperse® 170 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles with acidic surface groups. A nonionic stabilizing surfactant, ZetaSperse® 170 dispersant utilizes a tertiary amine anchoring grou...voir plus ZetaSperse® 170 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles with acidic surface groups. A nonionic stabilizing surfactant, ZetaSperse® 170 dispersant utilizes a tertiary amine anchoring group that has been found to have particularly strong affinity for carbon black pigments, titanium dioxide pigments, and other pigments and particles with acidic surface groups. ZetaSperse® 170 dispersant is most effective when used as a secondary dispersant in conjunction with anionic polymeric dispersants and grind resins where it can provide significant wetting, milling, and steric stabilization benefits, often improving milling efficiency, color development, and dispersion stability, allowing formulators to achieve higher performance. voir moins | |
| ZetaSperse® 179 Dispersant | Evonik Operations GmbH, BL Interface & Performance | ZetaSperse® 179 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles. A nonionic, high-HLB surfactant, ZetaSperse® 179 Dispersant provides performance benefits in the aqueous dispersion of organic, c...voir plus ZetaSperse® 179 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles. A nonionic, high-HLB surfactant, ZetaSperse® 179 Dispersant provides performance benefits in the aqueous dispersion of organic, carbon black, and inorganic pigments as well as fillers and functional solid chemicals. Ideal applications include resinated dispersions, colorants and pigment dispersions, inks and graphic arts, architectural and industrial coatings, and industrial processes. voir moins |
