FMS-9921 | Gelest, Incorporated | Silanol terminated polytrifluoropropylmethylsiloxane. | |
FMV-4031 | Gelest, Incorporated | Vinyl terminated trifluoropropylmethylsiloxane-dimethylsiloxane copolymer. | |
GELEST GEL D200 | Gelest, Incorporated | Temporarily deformable low penetration gel with typical dimethylsilicone properties. | |
GELEST GEL D300 | Gelest, Incorporated | Temporarily deformed medium penetration gel with typical dimethylsilicone properties. | |
GELEST GEL F065 | Gelest, Incorporated | Temporarily deformable material with fluorosilicone properties, providing fuel resistant properties and a low refractive index. The one part addition cure system is technically achieved by incorporating a fugitive inhibitor to the catalyzed mix. | |
GELEST GEL P065 | Gelest, Incorporated | Temporarily deformable material with excellent low temperature properties. It performs as a dielectric gel -115 to 235 degrees Celsius. | |
GELEST RG™ 01 | Gelest, Incorporated | Flexible, clear molding and encapsulation compound. The moderate viscosity of the catalyzed mix and long pot-life at room temperature make this extremely useful in micro-contact printing, prototype and small production run applications. | |
GELEST RG™ 02 | Gelest, Incorporated | Clear to translucent molding and encapsulation compound with greater adsorption of hydrocarbons than conventional silicons making it able to transfer a wider variety range of chemicals for self-assembly techniques. | |
GL-1350 | Mo-Sci Corporation | GL-1350 is a sealing glass. It is a glass-ceramic sealant. It can be used to bond and seal components for solid oxide fuel cells (SOFCs). | |
GL-1681 | Mo-Sci Corporation | GL-1681 is a sealing glass that is white in color. It is a viscous sealant. It can be used to bond metals and ceramics while operating in a viscous state and resisting crystallization. | |
GL-1702 | Mo-Sci Corporation | GL-1702 is a sealing glass that is white in color. It is a glass-ceramic sealant. It can be used to bond and seal components for solid oxide fuel cells (SOFCs). | |
GL-1707 | Mo-Sci Corporation | GL-1707 is a sealing glass. It is a viscous sealant. It can be used to bond metals and ceramics while operating in a viscous state and resisting crystallization. | |
HAM-301 | Gelest, Incorporated | Methylhydrosiloxane-octylmethylsiloxane copolymer. | |
HAM-3012 | Gelest, Incorporated | Methylhydrosiloxane-octylmethylsiloxane terpolymer. | |
HARDSIL™ AM | Gelest, Incorporated | Primerless silicone resin dispersed in a mixture of alcohols including methanol, n-butanol and isopropanol. | |
HARDSIL™ AP | Gelest, Incorporated | Primerless phenyl modified silicone dispersed in xylene for continuous use at temperatures up to 360 degrees Celsius. | |
HARDSIL™ AR | Gelest, Incorporated | Primerless modified phenyl silicone resin dispersed in xylene for continuous use at temperatures up to 325 degrees Celsius. | |
HARDSIL™ CC | Gelest, Incorporated | Peroxide curable solventless silicone resin supplied with catalyst. | |
HDP-111 | Gelest, Incorporated | Hydride terminated polyphenyl-(dimethylhydrosiloxy)siloxane. | |
HES-992 | Gelest, Incorporated | Triethylsiloxy terminated polyethylhydrosiloxane. | |
HMS-013 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
HMS-031 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
HMS-064 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
HMS-071 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
HMS-082 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
HMS-151 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
HMS-301 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
HMS-501 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
HMS-991 | Gelest, Incorporated | Trimethylsiloxy terminated polymethylhydrosiloxane. | |
HMS-992 | Gelest, Incorporated | Trimethylsiloxy terminated polymethylhydrosiloxane. | |
HMS-993 | Gelest, Incorporated | Trimethylsiloxy terminated polymethylhydrosiloxane. | |
HMS-H271 | Gelest, Incorporated | Hydride terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
HPM-502 | Gelest, Incorporated | Hydride terminated methylhydrosiloxane-phenylmethylsiloxane copolymer. | |
HQM-105 | Gelest, Incorporated | Hydride Q resin. | |
HQM-107 | Gelest, Incorporated | Hydride Q resin. | |
INPH055 | Gelest, Incorporated | Polyphosphonitrilic chloride for silanol oligomer polymerization. | |
INRH078 | Gelest, Incorporated | Tris(dibutylsulfide)rhodium trichloride. Catalyst for Si-H addition to olefins. Silicone vinyl addition cure catalyst, less susceptible to inhibition. Employed in moderate elevated temperature curing silicones. | |
IRGASTAB® UV 22 | BASF Dispersions & Resins | Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulatio...voir plus Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulations. voir moins | |
JONCRYL® 1685-A | BASF Dispersions & Resins | Joncryl® 1685-A is designed for excellent heat resistance in water-based overprint varnishes and inks providing excellent adhesion to a variety of substrates while also providing good block resistance. | |
JONCRYL® U 4501 | BASF Dispersions & Resins | JONCRYL® U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Ad...voir plus JONCRYL® U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Additionally, the low minimum film forming temperature and low solvent demand allows formulators to achieve low VOC coatings. With its broad acrylic dispersion compatibility, JONCRYL U 4501 can be easily blended with WB acrylic resins such as JONCRYL 9530-A to achieve higher levels of scratch, mar, and abrasion resistance, without many of the potential drawbacks of PUD blends. voir moins | |
KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
LMS-152 | Gelest, Incorporated | (Chloropropyl) methylsiloxane-dimethylsiloxane copolymer. | |
LUPHEN® D 207 E | BASF Dispersions & Resins | Luphen® D 207 E is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The film that Luphen® D 207 E yields can be activated by heat and in common with the PUR elastomer films, it has a limited hot-tack...voir plus Luphen® D 207 E is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The film that Luphen® D 207 E yields can be activated by heat and in common with the PUR elastomer films, it has a limited hot-tack life. voir moins | |
LUPHEN® D 259 U | BASF Dispersions & Resins | Luphen® D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition...voir plus Luphen® D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition of a few percent of a water dispersible polyisocyanate to Luphen® D 259 U increases its resistance to heat and moisture. The potlife of the adhesive depends on the reactivity of the polyisocyanate used, and this has to be determined in trials. voir moins | |
MCR-C12 | Gelest, Incorporated | Monocarbinol terminated polydimethylsiloxane. | |
MCR-C13 | Gelest, Incorporated | Monocarbinol terminated polydimethylsiloxane. | |
MCR-C18 | Gelest, Incorporated | Monocarbinol terminated polydimethylsiloxane. | |
MCR-C22 | Gelest, Incorporated | Monocarbinol terminated polydimethylsiloxane. | |
MCR-C61 | Gelest, Incorporated | Monodicarbinol terminated polydimethylsiloxane. | |
MCR-C62 | Gelest, Incorporated | Monodicarbinol terminated polydimethylsiloxane. | |
MCR-E11 | Gelest, Incorporated | Mono-(2,3-epoxy)propylether terminated polydimethylsiloxane. | |
MCR-E21 | Gelest, Incorporated | Mono-(2,3-epoxy)propylether terminated polydimethylsiloxane. | |
MCR-M11 | Gelest, Incorporated | Monomethacryloxypropyl terminated polydimethylsiloxane. | |
MCR-M17 | Gelest, Incorporated | Monomethacryloxypropyl terminated polydimethylsiloxane. | |
MCR-M22 | Gelest, Incorporated | Monomethacryloxypropyl terminated polydimethylsiloxane. | |
MCR-V31 | Gelest, Incorporated | Monovinyl terminated polydimethylsiloxane. | |
MCR-V41 | Gelest, Incorporated | Monovinyl terminated polydimethylsiloxane. | |
MTT-1015 | Gelest, Incorporated | Branched silicone fluid that offers higher purity level, discrete vapor pressure and more linear rheology as a function of pressure and temperature. | |
MTV-124 | Gelest, Incorporated | Vinyl T-structure polymer. | |
OMBO037 | Gelest, Incorporated | UV initiator for cationic polymerizations, e.g. cycloaliphatic epoxides. | |
PAN-040 | Gelest, Incorporated | Catalyst for transesterification. | |
PDM-0421 | Gelest, Incorporated | Aromatic siloxane for mechanical and heat transfer applications. | |
PDM-0821 | Gelest, Incorporated | Aromatic siloxane for mechanical and heat transfer applications. | |
PDM-1922 | Gelest, Incorporated | Aromatic siloxane for mechanical and heat transfer applications. | |
PDM-7040 | Gelest, Incorporated | Aromatic siloxane for mechanical and heat transfer applications. | |
PDM-7050 | Gelest, Incorporated | Aromatic siloxane for mechanical and heat transfer applications. | |
PDS-0332 | Gelest, Incorporated | Silanol terminated diphenylsiloxane-dimethylsiloxane copolymer. | |
PDS-1615 | Gelest, Incorporated | Silanol terminated diphenylsiloxane-dimethylsiloxane copolymer. | |
PDS-9931 | Gelest, Incorporated | Silanol terminated polydiphenylsiloxane. | |
PDV-0325 | Gelest, Incorporated | Vinyl terminated diphenylsiloxane-dimethylsiloxane copolymer. | |
PDV-0331 | Gelest, Incorporated | Vinyl terminated diphenylsiloxane-dimethylsiloxane copolymer. | |
PDV-0341 | Gelest, Incorporated | Vinyl terminated diphenylsiloxane-dimethylsiloxane copolymer. | |
PDV-0346 | Gelest, Incorporated | Vinyl terminated diphenylsiloxane-dimethylsiloxane copolymer. | |
PDV-0525 | Gelest, Incorporated | Vinyl terminated diphenylsiloxane-dimethylsiloxane copolymer. | |
PDV-0541 | Gelest, Incorporated | Vinyl terminated diphenylsiloxane-dimethylsiloxane copolymer. | |
PDV-1625 | Gelest, Incorporated | Vinyl terminated diphenylsiloxane-dimethylsiloxane copolymer. | |
PDV-1631 | Gelest, Incorporated | Vinyl terminated diphenylsiloxane-dimethylsiloxane copolymer. | |
PDV-1635 | Gelest, Incorporated | Vinyl terminated diphenylsiloxane-dimethylsiloxane copolymer. | |
PDV-1641 | Gelest, Incorporated | Vinyl terminated diphenylsiloxane-dimethylsiloxane copolymer. | |
PDV-2331 | Gelest, Incorporated | Vinyl terminated diphenylsiloxane-dimethylsiloxane copolymer. | |
PDV-2335 | Gelest, Incorporated | Vinyl terminated diphenylsiloxane-dimethylsiloxane copolymer. | |
PGBLK01 | Gelest, Incorporated | Black pigment concentrate, nonconductive. | |
PGBLK02 | Gelest, Incorporated | Black pigment concentrate, conductive. | |
PGBLU01 | Gelest, Incorporated | Blue pigment concentrate. | |
PGBRN01 | Gelest, Incorporated | Brown pigment concentrate. | |
PGFLS01 | Gelest, Incorporated | Flesh pigment concentrate. | |
PGGRN01 | Gelest, Incorporated | Green pigment concentrate. | |
PGORA01 | Gelest, Incorporated | Orange pigment concentrate. | |
PGORR01 | Gelest, Incorporated | Orange-red pigment concentrate. | |
PGRED01 | Gelest, Incorporated | Red pigment concentrate. | |
PGWHT01 | Gelest, Incorporated | White pigment concentrate. | |
PGXRA01 | Gelest, Incorporated | X-Ray opaque pigment concentrate. | |
PGYLW01 | Gelest, Incorporated | Yellow pigment concentrate. | |
PMM-0011 | Gelest, Incorporated | Aromatic siloxane for mechanical and heat transfer applications. | |
PMM-0021 | Gelest, Incorporated | Aromatic siloxane for mechanical and heat transfer applications. | |
PMM-0025 | Gelest, Incorporated | Aromatic siloxane for mechanical and heat transfer applications. | |
PMM-1015 | Gelest, Incorporated | Aromatic siloxane for mechanical and heat transfer applications. | |
PMM-1025 | Gelest, Incorporated | Aromatic siloxane for mechanical and heat transfer applications. |