| BurnEx™ 30-107 | Nyacol Nano Technology | BurnEx™ 30-107 is a flame retardant synergist for polyvinyl chloride and other materials employing halogens as its primary flame retardant. It is composed of agglomerated particles in the range of 10 to 40 microns and is used in textiles, adhesives, coati...voir plus BurnEx™ 30-107 is a flame retardant synergist for polyvinyl chloride and other materials employing halogens as its primary flame retardant. It is composed of agglomerated particles in the range of 10 to 40 microns and is used in textiles, adhesives, coatings, and water-based systems. voir moins | |
| BurnEx™ A1582 | Nyacol Nano Technology | BurnEx™ A1582, a Nano-Dispersible Dry Powder Colloidal Antimony Pentoxide Flame Retardant Additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in flexible vinyl and thermoplastic polyester. | |
| BurnEx™ ADP480 | Nyacol Nano Technology | BurnEx™ ADP480 a nano-dispersible dry powder colloidal antimony Pentoxide flame retardant additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in Polyolefins, HIPS, and Adhesives | |
| BurnEx™ ADP494 | Nyacol Nano Technology | BurnEx™ ADP494, a nano-dispersible dry powder colloidal antimony Pentoxide flame retardant additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in Solution-spun fibers, ABS, Epoxy-ketones. | |
| BurnEx Plus™ A1588LP | Nyacol Nano Technology | BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatin...voir plus BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatings, and water-based systems. voir moins | |
| BurnEx Plus™ A1590 | Nyacol Nano Technology | BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings...voir plus BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings, and water-based systems. voir moins | |
| BurnEx™ ZTA | Nyacol Nano Technology | BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds ...voir plus BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds and calendar compounds. voir moins | |
| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...voir plus DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. voir moins | Request Sample |
| DEGACRYL® HS 4151 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...voir plus DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. voir moins | Request Sample |
| DEGACRYL® HS 4174 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing alum...voir plus DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). voir moins | Request Sample |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...voir plus DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. voir moins | Request Sample |
| DEGACRYL® HS 4221 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...voir plus DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. voir moins | Request Sample |
| DEGACRYL® HS 4240 D | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion ...voir plus DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion to aluminum, no primer is required. voir moins | Request Sample |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...voir plus DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. voir moins | Request Sample |
| DEGACRYL® HS 4251 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...voir plus DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. voir moins | Request Sample |
| DEGACRYL® HS 4294 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...voir plus DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. voir moins | Request Sample |
| DEGACRYL® HS 4322 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tra...voir plus DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). voir moins | Request Sample |
| DEGACRYL® HS 4792 L | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applicati...voir plus DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGACRYL® HS 4792 L will achieve good adhesion to aluminium. voir moins | Request Sample |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethyle...voir plus DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. voir moins | Request Sample |
| DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...voir plus DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. voir moins | Request Sample |
| Dynasylan® 1124 | Evonik Operations GmbH, BL Silanes | Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be us...voir plus Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the chemical modification of polymers and isocyanates. voir moins | |
| DYNASYLAN® 1146 | Evonik Operations GmbH, BL Silanes | Hydrophobic Dynasylan® 1146 diaminofunctional silane is used in adhesives and sealants, and in coatings, to improve the adhesion of amino-reactive resins (e.g. RTV-silicones, two-part urethanes, silylated urethanes, MS polymers, and two-part epoxies) to i...voir plus Hydrophobic Dynasylan® 1146 diaminofunctional silane is used in adhesives and sealants, and in coatings, to improve the adhesion of amino-reactive resins (e.g. RTV-silicones, two-part urethanes, silylated urethanes, MS polymers, and two-part epoxies) to inorganic surfaces, plastic surfaces, and inorganic fillers. Dynasylan® 1146 silane is characterized by randomly distributed linear and cyclic oligosiloxanes and it fulfills the OECD polymer definition. Its low volatility and viscosity make compounding easy. Dynasylan® 1146 silane produces significantly less by-product (VOC) and has a correspondingly low odor level during application. voir moins | |
| Dynasylan® 40 | Evonik Operations GmbH, BL Silanes | Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt...voir plus Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt]4) by partial hydrolysis of the ethoxy groups to hydroxyl groups and subsequent condensation with formation of siloxane bonds (-Si-O-Si-). Dynasylan® 40 is a colorless, low-viscosity liquid with an SiO2 content of 40% (the Si content of Dynasylan® 40 is calculated as SiO2). The polysilicic acids still have a sufficient content of ethoxy groups which can be activated by acid- or base-catalyzed hydrolysis. Condensation starts even during hydrolysis, with the formation of relatively large polymeric molecules. During storage of these hydrolysates, condensation continues until a gel is formed, where the rate depends on the degree of hydrolysis. The action of the hydrolysates as binders is based on the continuation of the hydrolysis with subsequent gelation and dehydration to give polymeric SiO2 structures. voir moins | |
| Dynasylan® 4148 | Evonik Operations GmbH, BL Silanes | Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contr...voir plus Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contrary to most other organofunctional silanes, Dynasylan® 4148 features chemical polarity but has a non-reactive polar group. Furthermore, Dynasylan® 4148 can be used as anti-settling agent for fillers and pigments in paints as well as corrosion inhibitors in glycol based cooling agents. voir moins | |
| Dynasylan® 6490 | Evonik Operations GmbH, BL Silanes | Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. ...voir plus Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE). The high boiling point of Dynasylan® 6490, together with its high flash point, gives it outstanding advantages with respect to safety and handling during processing. From an environmental viewpoint it should be noted that the amount of released hydrolysis methanol (VOC) is significantly reduced compared to monomeric vinyl silanes. voir moins | |
| Dynasylan® A | Evonik Operations GmbH, BL Silanes | Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-...voir plus Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-catalysed hydrolysis. Since all 4 ethoxy groups are able to participate in this reaction, Dynasylan® A is regarded as tetrafunctional. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (-Si-O-Si-). Condensation starts before hydrolysis is complete. During storage of these hydrolysates condensation, continues until a gel is formed. The rate of gelation depends on the concentration of water. voir moins | |
| DYNASYLAN® AMEO-T | Evonik Operations GmbH, BL Silanes | DYNASYLAN® AMEO-T is a blend of primary and secondary aminofunctional silanes. The dual nature of the product allows it to bind chemically to both inorganic materials and organic polymers, thus acting as an adhesion promoter, a surface modifier or as a re...voir plus DYNASYLAN® AMEO-T is a blend of primary and secondary aminofunctional silanes. The dual nature of the product allows it to bind chemically to both inorganic materials and organic polymers, thus acting as an adhesion promoter, a surface modifier or as a reactive reagent. voir moins | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...voir plus Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. voir moins | |
| Dynasylan® P | Evonik Operations GmbH, BL Silanes | Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient ...voir plus Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations. voir moins | |
| Dynasylan® SIVO 202 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 202 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 202 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silyla...voir plus Dynasylan® SIVO 202 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 202 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers), RTV-silicones, two-part polyurethanes and two-part epoxies to inorganic surfaces and some difficult plastic surfaces. In addition, Dynasylan® SIVO 202 can lead to fast sealant curing and high-crosslinked products and it imparts both additional flexibility and hydrophobicity. voir moins | |
| Dynasylan® SIVO 203 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 203 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 203 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silyla...voir plus Dynasylan® SIVO 203 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 203 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers), RTV-silicones, two-part polyurethanes and two-part epoxies to inorganic surfaces and some difficult plastic surfaces. In addition, Dynasylan® SIVO 203 can lead to fast sealant curing and high-crosslinked products and it imparts both additional flexibility and hydrophobicity. voir moins | |
| DYNASYLAN® SIVO 210 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or ...voir plus Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or as chemical modification of substances. Dynasylan® SIVO 210 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols, aliphatic or aromatic hydrocarbons. voir moins | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMOEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMOEO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. The dual nature of its reactivity allows Dynasylan® VTMOEO to bind chemically to both inorganic materials (e.g. glass, meta...voir plus Dynasylan® VTMOEO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. The dual nature of its reactivity allows Dynasylan® VTMOEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning mainly as an efficient adhesion promoter and/or surface modifier. Dynasylan® VTMOEO is a colorless, low-viscosity liquid with a typical aromatic odor. voir moins | |
| Hexatran™-100 | Ascend Performance Materials Operations LLC | Hexatran™-100 is an innovative trifunctional clear amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solvency & com...voir plus Hexatran™-100 is an innovative trifunctional clear amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solvency & compatibility. voir moins | |
| Hexatran™-200 | Ascend Performance Materials Operations LLC | Hexatran™-200 is an innovative trifunctional straw-colored amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solven...voir plus Hexatran™-200 is an innovative trifunctional straw-colored amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solvency & compatibility. voir moins | |
| Hexatran™-300 | Ascend Performance Materials Operations LLC | Hexatran™-300 is an innovative trifunctional brown amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solvency & com...voir plus Hexatran™-300 is an innovative trifunctional brown amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solvency & compatibility. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| NexSil™ 12 | Nyacol Nano Technology | NexSil™ 12 is an alkaline dispersion of 12 nm colloidal silica at 30% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatm...voir plus NexSil™ 12 is an alkaline dispersion of 12 nm colloidal silica at 30% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder and more. voir moins | |
| NexSil™ 125-40 | Nyacol Nano Technology | NexSil™ 125-40 is an alkaline dispersion of 70 - 90 nm colloidal silica at a 40% SiO2 concentration in water. The product can be used in paper, steel and precision polishing applications where large particle size colloidal silica is required and as an ant...voir plus NexSil™ 125-40 is an alkaline dispersion of 70 - 90 nm colloidal silica at a 40% SiO2 concentration in water. The product can be used in paper, steel and precision polishing applications where large particle size colloidal silica is required and as an anti-slip coating. voir moins | |
| NexSil™ 125A | Nyacol Nano Technology | NexSil™ 125A is an acidic dispersion of 60 - 80 nm colloidal silica at a 30% SiO2 concentration in water. The product can be used in paper, steel, and precision polishing applications where large-particle size colloidal silica is required. | |
| NexSil™ 125K-40 | Nyacol Nano Technology | NexSil™ 125K-40 is a colloidal silica at a 40% SiO2 concentration in water. A large particle product, it is primarily intended as an abrasive for formulated polishing slurries. | |
| NexSil™ 125NH4 | Nyacol Nano Technology | NexSil™ 125NH4 is an ammonia-stabilized, aqueous dispersion of 85 nm colloidal silica at a 40% SiO2 concentration in water. This product has applications in surface modifications for cardboard coatings, anti-blocking effects for films and coatings, among ...voir plus NexSil™ 125NH4 is an ammonia-stabilized, aqueous dispersion of 85 nm colloidal silica at a 40% SiO2 concentration in water. This product has applications in surface modifications for cardboard coatings, anti-blocking effects for films and coatings, among others. voir moins | |
| NexSil™ 12HS | Nyacol Nano Technology | NexSil™ 12HS is an alkaline dispersion of 12 nm colloidal silica at 40% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binde...voir plus NexSil™ 12HS is an alkaline dispersion of 12 nm colloidal silica at 40% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or other applications where a very small particle size colloidal silica is required. voir moins | |
| NexSil™ 20 | Nyacol Nano Technology | NexSil™ 20 is an alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatm...voir plus NexSil™ 20 is an alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder or other applications where a small particle size colloidal silica is required. voir moins | |
| NexSil™ 20A | Nyacol Nano Technology | NexSil™ 20A is an acidic dispersion of 20 nm colloidal silica at 30% concentration. The product is used as a low sodium colloidal silica binder in investment casting and fibrous refractory applications, to formulate catalyst support structures, and for us...voir plus NexSil™ 20A is an acidic dispersion of 20 nm colloidal silica at 30% concentration. The product is used as a low sodium colloidal silica binder in investment casting and fibrous refractory applications, to formulate catalyst support structures, and for use with trivalent chromium conversion coatings, among other applications. voir moins | |
| NexSil™ 20K-30 | Nyacol Nano Technology | NexSil™ is a potassium-stabilized alkaline dispersion of 20nm colloidal silica at 30% SiO2 concentration in water. It can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile...voir plus NexSil™ is a potassium-stabilized alkaline dispersion of 20nm colloidal silica at 30% SiO2 concentration in water. It can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder, or other applications where a small particle-size colloidal silica is required. voir moins | |
| NexSil™ 20NH4 | Nyacol Nano Technology | NexSil™ 20NH4 is an ammonia-stabilized alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. It can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, cat...voir plus NexSil™ 20NH4 is an ammonia-stabilized alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. It can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or other applications. voir moins | |
| NexSil™ 35A | Nyacol Nano Technology | NexSil™ 35A is an acidic colloidal silica dispersion of 35nm collidal silica at 30% SIO2 concentration in water. This product is used in binders, cardboard coatings, films, coatings, catalyst production, and precision polishing of semiconductor substrates...voir plus NexSil™ 35A is an acidic colloidal silica dispersion of 35nm collidal silica at 30% SIO2 concentration in water. This product is used in binders, cardboard coatings, films, coatings, catalyst production, and precision polishing of semiconductor substrates. voir moins | |
| NexSil™ 6 | Nyacol Nano Technology | NexSil™ 6 is an alkaline dispersion of 6 nm colloidal silica at a 16-18% SiO2 concentration in water. It can be used in paper, steel, and precision polishing applications as well. | |
| NexSil™ 8 | Nyacol Nano Technology | NexSil™ 8 is an alkaline dispersion of 8 nm colloidal silica at 30% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or...voir plus NexSil™ 8 is an alkaline dispersion of 8 nm colloidal silica at 30% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or other applications where a very small particle size colloidal silica is required. voir moins | |
| NexSil™ 85-40 | Nyacol Nano Technology | NexSil™ 85-40 is an alkaline dispersion of 40-60 nm colloidal silica at a 40% SiO2 concentration in water. The product is used in paper, steel and precision polishing applications as well as specialty wafer polishing applications. | |
| NexSil™ 85A | Nyacol Nano Technology | NexSil™ 85A is an acidic dispersion of 40 - 60 nm colloidal silica at a 30% SiO2 concentration in water. The product can be used in paper, steel, and precision polishing applications. | |
| NexSil™ 85K-40 | Nyacol Nano Technology | NexSil™ 85K-40 is a colloidal silica of 50 nm colloidal silica at a 40% SiO2 concentration in water. This product is used as an abrasive for formulated polishing slurries. | |
| NexSil™ 85NH4 | Nyacol Nano Technology | NexSil™ 85NH4 is an ammonia-stabilized alkaline dispersion of 85 nm colloidal silica at 40% SiO2 concentration in water with low alkali metal levels. It is used in a wide variety of applications such as paper, steel and precision polishing applications. | |
| Nyacol ® DP5540 | Nyacol Nano Technology | Nyacol DP5540, colloidal silica in ethylene glycol, is a dispersion of nano-sized silica particles with a particle size between 100 and 120 nm. It is used in abrasion resistance and anti-blocking properties for PET film. | |
| Nyacol ® DP5480 | Nyacol Nano Technology | Nyacol DP5480, Colloidal Silica in Ethylene Glycol, are Silica particles with a particle size of 50nm colloidal silica at a 30% SiO2 concentration in water. The polymer-grade EG provides abrasion resistance and anti-blocking properties for PET film. | |
| Nyacol® DP5820 | Nyacol Nano Technology | Nycaol® DP5820, Colloidal Silica in Ethylene Glycol, is an ethylene glycol silica additive with a particle size of 20nm. This product is developed to provide anti-block and abrasion resistance properties to polyester film and tape. | |
| Nyacol® A1530 | Nyacol Nano Technology | Nyacol® A1530 is a water-based dispersion of 30nm particle antimony at 29% Antimony Pentoxide. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyacol® A1540N | Nyacol Nano Technology | Nyacol® A1540N is a water-based dispersion of 30nm particle antimony at 38% Antimony Pentoxide. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyacol® A1550 | Nyacol Nano Technology | Nyacol® A1550 is a water-based dispersion of 30nm particle antimony at 48% Antimony Pentoxide and a pH of 5. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyacol® A1550pH7 | Nyacol Nano Technology | Nyacol® A1550pH7 is a water-based dispersion of 30nm particle antimony at 48% Antimony Pentoxide and a pH of 7. It is used in the flame retardant treatments of DMAC solvent systems. | |
| Nyacol® AB40 | Nyacol Nano Technology | Nyacol® AB40 is a nonaqueous dispersion of colloidal antimony peroxide with a specific gravity of 1.67. It is used as a flame retardant synergist in halogen containing polyester and vinyl ester resins. | |
| Nyacol® AL20 | Nyacol Nano Technology | Nyacol® AL20 Colloidal Alumina, a high temperature coating/binder, is a water-based dispersion of particle size 60-90nm at 20% Aluminum content. It is used within high-temperature binders for refractories and ceramics. | |
| Nyacol® AL20SD | Nyacol Nano Technology | Nyacol® AL20SD is an alumina powder with a particle size of 60-90nm, a high-temperature coating/binder, that is dispersible in either water or ethylene glycol. This product is used in coating/binder applications where a water-based system cannot be used. | |
| Nyacol® AL25 | Nyacol Nano Technology | Nyacol® AL25 is a colloidal dispersion of boehmite with particle sizes of 70-80 nm at 20% Al2O3 content. This product is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and pa...voir plus Nyacol® AL25 is a colloidal dispersion of boehmite with particle sizes of 70-80 nm at 20% Al2O3 content. This product is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper coating. voir moins | |
| Nyacol® AL25-HP | Nyacol Nano Technology | Nyacol® AL25-HP is a colloidal dispersion of boehmite with dispersed sizes of 70-80 nm at 20% Al2O3 content. It is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper co...voir plus Nyacol® AL25-HP is a colloidal dispersion of boehmite with dispersed sizes of 70-80 nm at 20% Al2O3 content. It is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper coating. voir moins | |
| Nyacol® AP50 | Nyacol Nano Technology | Nyacol® AP50 is a dispersion of nano-sized (colloidal) antimony pentoxide particles in a tertiary amine. The product is used in liquid flame-retarded epoxy systems, in aerospace structural prepregs, and in printed circuit boards. | |
| Nyacol® APE1540 | Nyacol Nano Technology | Nyacol® APE1540 is a nonaqueous dispersion of colloidal antimony peroxide with a specific gravity of 1.70. It is used as a flame retardant synergist in halogen containing polyester and vinyl ester resins. | |
| Nyacol® APE3040 | Nyacol Nano Technology | Nyacol® APE3040 is a nonaqueous dispersion of colloidal antimony pentoxide formulated for use as a flame retardant synergist in halogen-containing vinyl ester and unsaturated polyester resins. It can replace antimony trioxide in formulas containing bromin...voir plus Nyacol® APE3040 is a nonaqueous dispersion of colloidal antimony pentoxide formulated for use as a flame retardant synergist in halogen-containing vinyl ester and unsaturated polyester resins. It can replace antimony trioxide in formulas containing bromine or chlorine and can be used in textiles, adhesives, coatings, and water-based systems. voir moins | |
| Nyacol® CeO2 | Nyacol Nano Technology | Nyacol® CeO2 is cerium oxide. This product is designed for use in automotive and other catalyst production. Nyacol® CeO2 is used in glass polishing and coating applications. | |
| NYACOL® DP6095 | Nyacol Nano Technology | NYACOL® DP6095 is a sub-micron calcium carbonate dispersion in ethylene glycol recommended for use as an additive in PET for film or fiber production. | |
| Nyacol® SN15 | Nyacol Nano Technology | Nyacol® SN15 is a colloidal tin oxide with a water carrier and a counter potassium ion concentration of 0.5%. This product is designed for use as a binder in ceramic or catalyst applications, a passivation agent, an anti-scuff agent on glass, and a potent...voir plus Nyacol® SN15 is a colloidal tin oxide with a water carrier and a counter potassium ion concentration of 0.5%. This product is designed for use as a binder in ceramic or catalyst applications, a passivation agent, an anti-scuff agent on glass, and a potential conductor in glass. Nyacol® SN15 is used in coatings and sealants. voir moins | |
| Nyacol® SN15CG | Nyacol Nano Technology | Nyacol® SN15CG is a colloidal tin oxide in a water carrier with an counter ion concentration of .23% ammonia. This product is designed for use as a binder in ceramic or catalyst applications, a passivation agent, an anti-scuff agent on glass, and a potent...voir plus Nyacol® SN15CG is a colloidal tin oxide in a water carrier with an counter ion concentration of .23% ammonia. This product is designed for use as a binder in ceramic or catalyst applications, a passivation agent, an anti-scuff agent on glass, and a potential conductor in glass. Nyacol® SN15ES is used in coatings and sealants. voir moins | |
| Nyagraph ® 249 | Nyacol Nano Technology | Nyagraph® 249 is a natural material based on the processing of graphite ore. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 200 | Nyacol Nano Technology | Nyagraph® 200 is a natural material based on the processing of graphite ore with a fine particle size of 80%>180 microns. This product is an intumescent flame retardant used in sealants, adhesives, and coatings and has applications in soft ash, plastic. | |
| Nyagraph® 250 | Nyacol Nano Technology | Nyagraph® 250 is a natural material based on the processing of graphite ore with an expansion volume of >250cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 251 | Nyacol Nano Technology | Nyagraph® 251 is a natural material based on the processing of graphite ore with a minimum of 250ml/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 35 | Nyacol Nano Technology | Nyagraph® 35 is a natural material based on the processing of graphite ore with an expansion volume of ≥35cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 351 | Nyacol Nano Technology | Nyagraph® 351 is a natural material based on the processing of graphite ore with an expansion volume of 330-350cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® FP | Nyacol Nano Technology | Nyagraph® FP is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g. This product is used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® KP251 | Nyacol Nano Technology | Nyagraph® KP251 is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g and soft ash, low initial expansion temperature, and low sulfur. This product is used in sealants, bitumens, rubbers, adhesives, and coatin...voir plus Nyagraph® KP251 is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g and soft ash, low initial expansion temperature, and low sulfur. This product is used in sealants, bitumens, rubbers, adhesives, and coatings. voir moins | |
| Nyasil™ 20 | Nyacol Nano Technology | Nyasil™ 20, a nano-structured amorphous silica powder, is an ethylene glycol silica additive with a mean particle diameter of 20μm. This product is used with polyester film and tape. | |
| Nyasil™ 5 | Nyacol Nano Technology | Nyasil™ 5 is an amorphous silica ethylene glycol silica additive with a particle size of 2.0µm. This product is used with polyester film and tape. | |
| Nyasil™ 6200 | Nyacol Nano Technology | Nyasil™ 6200, amorphous silica, ethylene glycol silica additive with a mean particle diameter of 1.5µm. This product is used with polyster film and tape. | |
| Polymer ST 48 | Evonik Operations GmbH, BL Silanes | Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the applic...voir plus Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the application as sealant for interior or exterior joints, e.g. expansion or connection joints, interior joints for dry walling, joints at staircases. voir moins | |
| Polymer ST 61 | Evonik Operations GmbH, BL Silanes | Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high ...voir plus Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high elasticity. voir moins | |
| Polymer ST 61 LV | Evonik Operations GmbH, BL Silanes | Polymer ST 61 LV is a plasticizer-free product which addresses the same formulation properties as Polymer ST 61. Its viscosity is approx. 70 % less, thus it allows quicker dosing, lower formulation viscosities and higher possible filler loading levels. | |
| Polymer ST 77 | Evonik Operations GmbH, BL Silanes | Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assemb...voir plus Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assembly of superstructural parts, bumpers, etc. Mechanical fastening is often avoided as it could cause damage to the materials used. In addition, it could negatively affect the design. voir moins | |
| Polymer ST 80 | Evonik Operations GmbH, BL Silanes | Polymer ST 80 is a high quality binder for adhesive formulations where high bonding strength and high surface hardness after curing are required. | |
| Polymer ST 81 | Evonik Operations GmbH, BL Silanes | Polymer ST 81 does not contain plasticizers, it offers a large variability in formulation design. It allows the formulation of both tin- and phthalate-free products. It allows formulators to enter markets such as wood construction, transport and automotiv...voir plus Polymer ST 81 does not contain plasticizers, it offers a large variability in formulation design. It allows the formulation of both tin- and phthalate-free products. It allows formulators to enter markets such as wood construction, transport and automotive, assembly as well as light-weight construction. voir moins | |
| POLYVEST® 110 | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® 110 is a stereospecific, low viscous and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. The apolar, hydrophobic hydrocarbon resin POLYVEST® 110 is a highly reactive binder characterized by: high chemical resista...voir plus POLYVEST® 110 is a stereospecific, low viscous and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. The apolar, hydrophobic hydrocarbon resin POLYVEST® 110 is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonates. POLYVEST® 110 is used in adhesive and sealant compositions, polymer printing plates, plasticizer for rubber compounds, binder for recycled rubber compounds, electrical insulations and potting compounds, release agents for polyurethane foams, modifier of vegetable oils, binder for oxidative drying alkyd resins, binder for dusty and dry quartz sand, binder for soil stabilization, and many more. voir moins | Request Sample |
| POLYVEST® 130 | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® 130 is a stereospecific, low viscous and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. The apolar, hydrophobic hydrocarbon resin POLYVEST® 130 is a highly reactive binder characterized by: high chemical resista...voir plus POLYVEST® 130 is a stereospecific, low viscous and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. The apolar, hydrophobic hydrocarbon resin POLYVEST® 130 is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonates. POLYVEST® 130 is used in adhesive and sealant compositions, polymer printing plates, plasticizer for rubber compounds, binder for recycled rubber compounds, release agents for polyurethane foams, cell opener for polyurethane foams, defoamers, modifier of resin systems, modifier of vegetable oils, binder for dusty and dry quartz sand, and many more. voir moins | Request Sample |
| POLYVEST® eCO 110 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 110 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 110 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification...voir plus POLYVEST® eCO 110 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 110 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 110 Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO 110 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and others, and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 110 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizer for rubber compounds, binder for recycled rubber compounds, electrical insulations and potting compounds, release agents for polyurethane foams, a modifier of vegetable oils, binder for oxidative drying alkyd resins, binder for dusty and dry quartz sand, binder for soil stabilization, and many more. voir moins | Request Sample |
| POLYVEST® eCO 130 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification...voir plus POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 130 Bio brings the same well-known performance but has reduced carbon emissions. The apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 130 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 130 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizers for rubber compounds, binders for recycled rubber compounds, release agents for polyurethane foams, cell openers for polyurethane foams, defoamers, modifiers of resin systems, a modifier of vegetable oils, binder for dusty and dry quartz sand, and many more. voir moins | Request Sample |
| POLYVEST® eCO EP MA 100 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and acce...voir plus POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. POLYVEST® eCO EP MA 100 Bio is compliant with the sustainability criteria laid down by the ISCC, a voluntary certification and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO EP MA 100 Bio brings the same well-known performance but has reduced carbon emissions. voir moins | Request Sample |
| POLYVEST® eCO HT Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a ...voir plus POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a highly reactive binder providing versatile opportunities for precise chemical modifications and reactions. POLYVEST® eCO HT Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO HT Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO HT Bio exhibits the following features: high chemical resistance towards acids and bases, excellent water resistance, excellent electrical insulation properties, high cold resistance by keeping good flexibility at low temperatures, good solubility in aliphatics, aromatics, and ethers, low moisture and gas permeability, good adhesion to various substrates. POLYVEST® eCO HT Bio is used in adhesive and sealant compositions, insulated glass sealants, waterproofing membranes and coatings, gap fillers and expansion joints, electrical insulations and potting compounds, binder for rubber-based sealants and recycled rubber compounds, polymer modification, and many more. voir moins | Request Sample |
