| BurnEx™ 30-107 | Nyacol Nano Technology | BurnEx™ 30-107 is a flame retardant synergist for polyvinyl chloride and other materials employing halogens as its primary flame retardant. It is composed of agglomerated particles in the range of 10 to 40 microns and is used in textiles, adhesives, coati...voir plus BurnEx™ 30-107 is a flame retardant synergist for polyvinyl chloride and other materials employing halogens as its primary flame retardant. It is composed of agglomerated particles in the range of 10 to 40 microns and is used in textiles, adhesives, coatings, and water-based systems. voir moins | |
| BurnEx™ A1582 | Nyacol Nano Technology | BurnEx™ A1582, a Nano-Dispersible Dry Powder Colloidal Antimony Pentoxide Flame Retardant Additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in flexible vinyl and thermoplastic polyester. | |
| BurnEx™ ADP480 | Nyacol Nano Technology | BurnEx™ ADP480 a nano-dispersible dry powder colloidal antimony Pentoxide flame retardant additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in Polyolefins, HIPS, and Adhesives | |
| BurnEx™ ADP494 | Nyacol Nano Technology | BurnEx™ ADP494, a nano-dispersible dry powder colloidal antimony Pentoxide flame retardant additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in Solution-spun fibers, ABS, Epoxy-ketones. | |
| BurnEx Plus™ A1588LP | Nyacol Nano Technology | BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatin...voir plus BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatings, and water-based systems. voir moins | |
| BurnEx Plus™ A1590 | Nyacol Nano Technology | BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings...voir plus BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings, and water-based systems. voir moins | |
| BurnEx™ ZTA | Nyacol Nano Technology | BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds ...voir plus BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds and calendar compounds. voir moins | |
| Hydrorene AW 1 | S.A.P.I.C.I. SpA | Hydrorene AW 1 is a water-dispersible isocyanate. This product can be used in 2k waterborne varnishes with good chemical or abrasion resistance. It can also be used in adhesives. | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| NexSil™ 12 | Nyacol Nano Technology | NexSil™ 12 is an alkaline dispersion of 12 nm colloidal silica at 30% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatm...voir plus NexSil™ 12 is an alkaline dispersion of 12 nm colloidal silica at 30% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder and more. voir moins | |
| NexSil™ 125-40 | Nyacol Nano Technology | NexSil™ 125-40 is an alkaline dispersion of 70 - 90 nm colloidal silica at a 40% SiO2 concentration in water. The product can be used in paper, steel and precision polishing applications where large particle size colloidal silica is required and as an ant...voir plus NexSil™ 125-40 is an alkaline dispersion of 70 - 90 nm colloidal silica at a 40% SiO2 concentration in water. The product can be used in paper, steel and precision polishing applications where large particle size colloidal silica is required and as an anti-slip coating. voir moins | |
| NexSil™ 125A | Nyacol Nano Technology | NexSil™ 125A is an acidic dispersion of 60 - 80 nm colloidal silica at a 30% SiO2 concentration in water. The product can be used in paper, steel, and precision polishing applications where large-particle size colloidal silica is required. | |
| NexSil™ 125K-40 | Nyacol Nano Technology | NexSil™ 125K-40 is a colloidal silica at a 40% SiO2 concentration in water. A large particle product, it is primarily intended as an abrasive for formulated polishing slurries. | |
| NexSil™ 125NH4 | Nyacol Nano Technology | NexSil™ 125NH4 is an ammonia-stabilized, aqueous dispersion of 85 nm colloidal silica at a 40% SiO2 concentration in water. This product has applications in surface modifications for cardboard coatings, anti-blocking effects for films and coatings, among ...voir plus NexSil™ 125NH4 is an ammonia-stabilized, aqueous dispersion of 85 nm colloidal silica at a 40% SiO2 concentration in water. This product has applications in surface modifications for cardboard coatings, anti-blocking effects for films and coatings, among others. voir moins | |
| NexSil™ 12HS | Nyacol Nano Technology | NexSil™ 12HS is an alkaline dispersion of 12 nm colloidal silica at 40% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binde...voir plus NexSil™ 12HS is an alkaline dispersion of 12 nm colloidal silica at 40% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or other applications where a very small particle size colloidal silica is required. voir moins | |
| NexSil™ 20 | Nyacol Nano Technology | NexSil™ 20 is an alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatm...voir plus NexSil™ 20 is an alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder or other applications where a small particle size colloidal silica is required. voir moins | |
| NexSil™ 20A | Nyacol Nano Technology | NexSil™ 20A is an acidic dispersion of 20 nm colloidal silica at 30% concentration. The product is used as a low sodium colloidal silica binder in investment casting and fibrous refractory applications, to formulate catalyst support structures, and for us...voir plus NexSil™ 20A is an acidic dispersion of 20 nm colloidal silica at 30% concentration. The product is used as a low sodium colloidal silica binder in investment casting and fibrous refractory applications, to formulate catalyst support structures, and for use with trivalent chromium conversion coatings, among other applications. voir moins | |
| NexSil™ 20K-30 | Nyacol Nano Technology | NexSil™ is a potassium-stabilized alkaline dispersion of 20nm colloidal silica at 30% SiO2 concentration in water. It can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile...voir plus NexSil™ is a potassium-stabilized alkaline dispersion of 20nm colloidal silica at 30% SiO2 concentration in water. It can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder, or other applications where a small particle-size colloidal silica is required. voir moins | |
| NexSil™ 20NH4 | Nyacol Nano Technology | NexSil™ 20NH4 is an ammonia-stabilized alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. It can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, cat...voir plus NexSil™ 20NH4 is an ammonia-stabilized alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. It can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or other applications. voir moins | |
| NexSil™ 35A | Nyacol Nano Technology | NexSil™ 35A is an acidic colloidal silica dispersion of 35nm collidal silica at 30% SIO2 concentration in water. This product is used in binders, cardboard coatings, films, coatings, catalyst production, and precision polishing of semiconductor substrates...voir plus NexSil™ 35A is an acidic colloidal silica dispersion of 35nm collidal silica at 30% SIO2 concentration in water. This product is used in binders, cardboard coatings, films, coatings, catalyst production, and precision polishing of semiconductor substrates. voir moins | |
| NexSil™ 6 | Nyacol Nano Technology | NexSil™ 6 is an alkaline dispersion of 6 nm colloidal silica at a 16-18% SiO2 concentration in water. It can be used in paper, steel, and precision polishing applications as well. | |
| NexSil™ 8 | Nyacol Nano Technology | NexSil™ 8 is an alkaline dispersion of 8 nm colloidal silica at 30% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or...voir plus NexSil™ 8 is an alkaline dispersion of 8 nm colloidal silica at 30% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or other applications where a very small particle size colloidal silica is required. voir moins | |
| NexSil™ 85-40 | Nyacol Nano Technology | NexSil™ 85-40 is an alkaline dispersion of 40-60 nm colloidal silica at a 40% SiO2 concentration in water. The product is used in paper, steel and precision polishing applications as well as specialty wafer polishing applications. | |
| NexSil™ 85A | Nyacol Nano Technology | NexSil™ 85A is an acidic dispersion of 40 - 60 nm colloidal silica at a 30% SiO2 concentration in water. The product can be used in paper, steel, and precision polishing applications. | |
| NexSil™ 85K-40 | Nyacol Nano Technology | NexSil™ 85K-40 is a colloidal silica of 50 nm colloidal silica at a 40% SiO2 concentration in water. This product is used as an abrasive for formulated polishing slurries. | |
| NexSil™ 85NH4 | Nyacol Nano Technology | NexSil™ 85NH4 is an ammonia-stabilized alkaline dispersion of 85 nm colloidal silica at 40% SiO2 concentration in water with low alkali metal levels. It is used in a wide variety of applications such as paper, steel and precision polishing applications. | |
| Nyacol ® DP5540 | Nyacol Nano Technology | Nyacol DP5540, colloidal silica in ethylene glycol, is a dispersion of nano-sized silica particles with a particle size between 100 and 120 nm. It is used in abrasion resistance and anti-blocking properties for PET film. | |
| Nyacol ® DP5480 | Nyacol Nano Technology | Nyacol DP5480, Colloidal Silica in Ethylene Glycol, are Silica particles with a particle size of 50nm colloidal silica at a 30% SiO2 concentration in water. The polymer-grade EG provides abrasion resistance and anti-blocking properties for PET film. | |
| Nyacol® DP5820 | Nyacol Nano Technology | Nycaol® DP5820, Colloidal Silica in Ethylene Glycol, is an ethylene glycol silica additive with a particle size of 20nm. This product is developed to provide anti-block and abrasion resistance properties to polyester film and tape. | |
| Nyacol® A1530 | Nyacol Nano Technology | Nyacol® A1530 is a water-based dispersion of 30nm particle antimony at 29% Antimony Pentoxide. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyacol® A1540N | Nyacol Nano Technology | Nyacol® A1540N is a water-based dispersion of 30nm particle antimony at 38% Antimony Pentoxide. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyacol® A1550 | Nyacol Nano Technology | Nyacol® A1550 is a water-based dispersion of 30nm particle antimony at 48% Antimony Pentoxide and a pH of 5. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyacol® A1550pH7 | Nyacol Nano Technology | Nyacol® A1550pH7 is a water-based dispersion of 30nm particle antimony at 48% Antimony Pentoxide and a pH of 7. It is used in the flame retardant treatments of DMAC solvent systems. | |
| Nyacol® AB40 | Nyacol Nano Technology | Nyacol® AB40 is a nonaqueous dispersion of colloidal antimony peroxide with a specific gravity of 1.67. It is used as a flame retardant synergist in halogen containing polyester and vinyl ester resins. | |
| Nyacol® AL20 | Nyacol Nano Technology | Nyacol® AL20 Colloidal Alumina, a high temperature coating/binder, is a water-based dispersion of particle size 60-90nm at 20% Aluminum content. It is used within high-temperature binders for refractories and ceramics. | |
| Nyacol® AL20SD | Nyacol Nano Technology | Nyacol® AL20SD is an alumina powder with a particle size of 60-90nm, a high-temperature coating/binder, that is dispersible in either water or ethylene glycol. This product is used in coating/binder applications where a water-based system cannot be used. | |
| Nyacol® AL25 | Nyacol Nano Technology | Nyacol® AL25 is a colloidal dispersion of boehmite with particle sizes of 70-80 nm at 20% Al2O3 content. This product is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and pa...voir plus Nyacol® AL25 is a colloidal dispersion of boehmite with particle sizes of 70-80 nm at 20% Al2O3 content. This product is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper coating. voir moins | |
| Nyacol® AL25-HP | Nyacol Nano Technology | Nyacol® AL25-HP is a colloidal dispersion of boehmite with dispersed sizes of 70-80 nm at 20% Al2O3 content. It is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper co...voir plus Nyacol® AL25-HP is a colloidal dispersion of boehmite with dispersed sizes of 70-80 nm at 20% Al2O3 content. It is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper coating. voir moins | |
| Nyacol® AP50 | Nyacol Nano Technology | Nyacol® AP50 is a dispersion of nano-sized (colloidal) antimony pentoxide particles in a tertiary amine. The product is used in liquid flame-retarded epoxy systems, in aerospace structural prepregs, and in printed circuit boards. | |
| Nyacol® APE1540 | Nyacol Nano Technology | Nyacol® APE1540 is a nonaqueous dispersion of colloidal antimony peroxide with a specific gravity of 1.70. It is used as a flame retardant synergist in halogen containing polyester and vinyl ester resins. | |
| Nyacol® APE3040 | Nyacol Nano Technology | Nyacol® APE3040 is a nonaqueous dispersion of colloidal antimony pentoxide formulated for use as a flame retardant synergist in halogen-containing vinyl ester and unsaturated polyester resins. It can replace antimony trioxide in formulas containing bromin...voir plus Nyacol® APE3040 is a nonaqueous dispersion of colloidal antimony pentoxide formulated for use as a flame retardant synergist in halogen-containing vinyl ester and unsaturated polyester resins. It can replace antimony trioxide in formulas containing bromine or chlorine and can be used in textiles, adhesives, coatings, and water-based systems. voir moins | |
| Nyacol® CeO2 | Nyacol Nano Technology | Nyacol® CeO2 is cerium oxide. This product is designed for use in automotive and other catalyst production. Nyacol® CeO2 is used in glass polishing and coating applications. | |
| NYACOL® DP6095 | Nyacol Nano Technology | NYACOL® DP6095 is a sub-micron calcium carbonate dispersion in ethylene glycol recommended for use as an additive in PET for film or fiber production. | |
| Nyacol® SN15 | Nyacol Nano Technology | Nyacol® SN15 is a colloidal tin oxide with a water carrier and a counter potassium ion concentration of 0.5%. This product is designed for use as a binder in ceramic or catalyst applications, a passivation agent, an anti-scuff agent on glass, and a potent...voir plus Nyacol® SN15 is a colloidal tin oxide with a water carrier and a counter potassium ion concentration of 0.5%. This product is designed for use as a binder in ceramic or catalyst applications, a passivation agent, an anti-scuff agent on glass, and a potential conductor in glass. Nyacol® SN15 is used in coatings and sealants. voir moins | |
| Nyacol® SN15CG | Nyacol Nano Technology | Nyacol® SN15CG is a colloidal tin oxide in a water carrier with an counter ion concentration of .23% ammonia. This product is designed for use as a binder in ceramic or catalyst applications, a passivation agent, an anti-scuff agent on glass, and a potent...voir plus Nyacol® SN15CG is a colloidal tin oxide in a water carrier with an counter ion concentration of .23% ammonia. This product is designed for use as a binder in ceramic or catalyst applications, a passivation agent, an anti-scuff agent on glass, and a potential conductor in glass. Nyacol® SN15ES is used in coatings and sealants. voir moins | |
| Nyagraph ® 249 | Nyacol Nano Technology | Nyagraph® 249 is a natural material based on the processing of graphite ore. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 200 | Nyacol Nano Technology | Nyagraph® 200 is a natural material based on the processing of graphite ore with a fine particle size of 80%>180 microns. This product is an intumescent flame retardant used in sealants, adhesives, and coatings and has applications in soft ash, plastic. | |
| Nyagraph® 250 | Nyacol Nano Technology | Nyagraph® 250 is a natural material based on the processing of graphite ore with an expansion volume of >250cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 251 | Nyacol Nano Technology | Nyagraph® 251 is a natural material based on the processing of graphite ore with a minimum of 250ml/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 35 | Nyacol Nano Technology | Nyagraph® 35 is a natural material based on the processing of graphite ore with an expansion volume of ≥35cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 351 | Nyacol Nano Technology | Nyagraph® 351 is a natural material based on the processing of graphite ore with an expansion volume of 330-350cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® FP | Nyacol Nano Technology | Nyagraph® FP is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g. This product is used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® KP251 | Nyacol Nano Technology | Nyagraph® KP251 is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g and soft ash, low initial expansion temperature, and low sulfur. This product is used in sealants, bitumens, rubbers, adhesives, and coatin...voir plus Nyagraph® KP251 is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g and soft ash, low initial expansion temperature, and low sulfur. This product is used in sealants, bitumens, rubbers, adhesives, and coatings. voir moins | |
| Nyasil™ 20 | Nyacol Nano Technology | Nyasil™ 20, a nano-structured amorphous silica powder, is an ethylene glycol silica additive with a mean particle diameter of 20μm. This product is used with polyester film and tape. | |
| Nyasil™ 5 | Nyacol Nano Technology | Nyasil™ 5 is an amorphous silica ethylene glycol silica additive with a particle size of 2.0µm. This product is used with polyester film and tape. | |
| Nyasil™ 6200 | Nyacol Nano Technology | Nyasil™ 6200, amorphous silica, ethylene glycol silica additive with a mean particle diameter of 1.5µm. This product is used with polyster film and tape. | |
| Polurene BK 50 AE | S.A.P.I.C.I. SpA | Polurene BK 50 AE is a TDI-based polymer containing blocked and curable isocyanic groups. This product can be used as an adhesive in non-woven fabrics, PVC, and fabric laminations, among other uses. It contains 50% non-volatiles. | |
| Polurene FP75 | S.A.P.I.C.I. SpA | Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates. | |
| Polurene IAX 3719 | S.A.P.I.C.I. SpA | Polurene IAX 3719 is an MDI-based polyurethane resin. This product has strong initial bond. It can be used as a 1K adhesive in PVC systems, expanded polyurethane, and natural or synthetic fabrics. | |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| Polurene LP 100 LV | S.A.P.I.C.I. SpA | Polurene LP 100 LV is a polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and can be used to improve the flexibility of epoxy systems. It is designed for use in adhesives. | |
| Polurene LP 100 NFF | S.A.P.I.C.I. SpA | Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving t...voir plus Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving the flexibility of epoxy systems. voir moins | |
| Polurene LP 80 LV | S.A.P.I.C.I. SpA | Polurene LP 80 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and memb...voir plus Polurene LP 80 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and membranes. voir moins | |
| Polurene LP 90 LV | S.A.P.I.C.I. SpA | Polurene LP 90 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and memb...voir plus Polurene LP 90 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and membranes. voir moins | |
| Polurene LPI 103 | S.A.P.I.C.I. SpA | Polurene LPI 103 is an MDI-based 1K adhesive. This product has strong initial bond. It can be used in PVC applications, expanded polyurethane, and natural or synthetic fabrics. | |
| Polurene LPI 1272 | S.A.P.I.C.I. SpA | Polurene LPI 1272 is a solvent-free MDI-based polyurethane resin. This product can be used as an adhesive in sandwich panels for thermal and acoustic insulation. It contains 100% non-volatiles. | |
| Polurene LPI 2572 | S.A.P.I.C.I. SpA | Polurene LPI 2572 is a solvent-free MDI-based polyurethane resin. This product can be used as an adhesive in sandwich panels for thermal and acoustic insulation. It contains 100% non-volatiles. | |
| Polurene LPI 407 | S.A.P.I.C.I. SpA | Polurene LPI 407is a MDI-based polyester/polyether blend 2K adhesive in ethyl acetate. This product has strong initial bond and can be used in PVC, polyurethane, and natural or synthetic fabrics. | |
| Polurene LPI 433 | S.A.P.I.C.I. SpA | Polurene LPI 433 is a MDI polyether, 2K 100% solid content adhesive. This product has strong initial bond. It can be used in PVC, expanded polyurethane, and natural or synthetic fabrics. | |
| Polurene MD 1500 | S.A.P.I.C.I. SpA | Polurene MD 1500 is a polyfunctional polyisocyanate of 4,4-diphenylmethane diisocyanate. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like sealants, synthetic mortars, and self-leveling compounds...voir plus Polurene MD 1500 is a polyfunctional polyisocyanate of 4,4-diphenylmethane diisocyanate. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like sealants, synthetic mortars, and self-leveling compounds. voir moins | |
| Polurene MD 1600 | S.A.P.I.C.I. SpA | Polurene MD 1600 is a polyfunctional polyisocyanate based on MDI. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like adhesives, 2K primers, sealants, and self-leveling compounds. | |
| Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...voir plus Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. voir moins | |
| Polurene T 70 AE | S.A.P.I.C.I. SpA | Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings w...voir plus Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings with good chemical and weather resistance. This product contains less than .5% IPDI isocyanates. voir moins | |
| Polurgreen FP75-01 | S.A.P.I.C.I. SpA | Polurgreen FP75-01 is a polyurethane adduct. This product contains less than .1% TDI isocyanates. It may be used in 2K adhesives and inks. Polurgreen FP75-01 is in accord with EU, BFR, and FDA regulations for food packaging. | |
| Rexin XP 81 | S.A.P.I.C.I. SpA | Rexin XP 81 is a linear polyester polyol based on bio-derived succinic acid and glycol. This product combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Rexin XP 82 | S.A.P.I.C.I. SpA | Rexin XP 82 is a linear polyester polyol. This product is based on bio-derived succinic acid and glycol, and it combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Rexin XP 86 | S.A.P.I.C.I. SpA | Rexin XP 86 is a linear polyester polyol. This product is based on bio-derived succinic acid and glycol, and it combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Ucopol M 541 | S.A.P.I.C.I. SpA | Ucopol M 541 is a moisture-curing prepolymer. This product can be used to formulate 1K and 2K sealants and adhesives. It can be mixed with Ucopol M 551 in order to adjust the end product's flexibility or drying time. This product contains less than .5%...voir plus Ucopol M 541 is a moisture-curing prepolymer. This product can be used to formulate 1K and 2K sealants and adhesives. It can be mixed with Ucopol M 551 in order to adjust the end product's flexibility or drying time. This product contains less than .5% TDI isocyanates. voir moins | |
| Ucopol M 551 | S.A.P.I.C.I. SpA | Ucopol M 551 is a moisture-curing prepolymer. This product can be used to formulate 1K or 2K sealants and adhesives. It can be mixed with Ucopol M 541 in order to adjust the end product's flexibility or drying time. This product contains less than .5% ...voir plus Ucopol M 551 is a moisture-curing prepolymer. This product can be used to formulate 1K or 2K sealants and adhesives. It can be mixed with Ucopol M 541 in order to adjust the end product's flexibility or drying time. This product contains less than .5% TDI isocyanates. voir moins | |
| Uni-Dur E 1001 | S.A.P.I.C.I. SpA | Uni-Dur E 1001 is an isocyanic hardener. This product can be used to cross-link polyurethane adhesives for natural or synthetic rubber. It is soluble in ethyl acetate and appears as a clear, viscous fluid. | |
| Uni-Dur E 2002 ARFE | S.A.P.I.C.I. SpA | Uni-Dur E 2002 ARFE is an adhesive that is soluble in ethyl acetate. This product significantly improves the adhesion, cohesion, and heat resistance of the final bond. It can be used to cross-link polyurethane adhesives for natural or synthetic rubber. | |
| Uni-Dur WB 7000 | S.A.P.I.C.I. SpA | Uni-Dur WB 7000 is a hardener for high-quality water-based polyurethane systems. This product can improve the resistance of adhesive bonds toward moisture, heat and solvents and is easily dispersible by mechanical stirrers. It can be used as an adhesive...voir plus Uni-Dur WB 7000 is a hardener for high-quality water-based polyurethane systems. This product can improve the resistance of adhesive bonds toward moisture, heat and solvents and is easily dispersible by mechanical stirrers. It can be used as an adhesive in footwear applications. voir moins | |
| Uni-Dur WB 7075 | S.A.P.I.C.I. SpA | Uni-Dur WB 7075 is a hardener for high-quality water-based polyurethane systems. This product can improve the resistance of adhesive bonds toward moisture, heat and solvents and is easily dispersible by mechanical stirrers. It can be used as an adhesive...voir plus Uni-Dur WB 7075 is a hardener for high-quality water-based polyurethane systems. This product can improve the resistance of adhesive bonds toward moisture, heat and solvents and is easily dispersible by mechanical stirrers. It can be used as an adhesive in footwear applications. voir moins | |
| Automated Discharge Systems | Charles Ross & Son Company | A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipm...voir plus A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipment, an extruder, or a two or three-roll mill. voir moins |  |
| Double Planetary Mixer | Charles Ross & Son Company | Ross pioneered the Double Planetary Mixer design more than 60 years ago. Design updates make this mixer suitable for use in applications up to 7,000,000 centipoise. A high speed design variation is also available. |  |
| High Shear Mixer | Charles Ross & Son Company | All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear...voir plus All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear particles and droplets, and expel material at high velocity into the surrounding mix, creating intense hydraulic shear. voir moins |  |
| High Speed Disperser | Charles Ross & Son Company | Ross High Speed Dispersers are the industry standard for durability, faster dispersion and low maintenance costs. Standard models include: explosion-proof, inverter duty motors; heavy duty V-belt drives and bearings; safety switches; an air/oil hydraulic ...voir plus Ross High Speed Dispersers are the industry standard for durability, faster dispersion and low maintenance costs. Standard models include: explosion-proof, inverter duty motors; heavy duty V-belt drives and bearings; safety switches; an air/oil hydraulic lift system with hand/foot controls; and stainless steel wetted parts and shaft guard. Sizes range from 1/2 HP to 200 HP to handle batches from 1 to 2000 gallons. Custom designs are also available. voir moins |  |
| Multi-Shaft Mixer | Charles Ross & Son Company | We offer Dual and Triple Shaft designs to meet your specific process requirements. Our economical Dual Shaft design includes a conventional high speed disperser and a two wing anchor agitator. This configuration is ideal for straight forward dispersion an...voir plus We offer Dual and Triple Shaft designs to meet your specific process requirements. Our economical Dual Shaft design includes a conventional high speed disperser and a two wing anchor agitator. This configuration is ideal for straight forward dispersion and mixing applications. voir moins |  |
| Planetary Dispersers | Charles Ross & Son Company | The patented Planetary Disperser combines a planetary blade and a high speed dispersion blade. The planetary and the high speed disperser blades rotate on their own axes and also rotate continuously around the vessel. The planetary blade feeds materials ...voir plus The patented Planetary Disperser combines a planetary blade and a high speed dispersion blade. The planetary and the high speed disperser blades rotate on their own axes and also rotate continuously around the vessel. The planetary blade feeds materials directly into the high shear zone of the orbiting high speed disperser. This combination of unique mixing actions eliminate the need for multiple mixers i.e. 2 technologies in one machine. voir moins |  |
| Powder Induction | Charles Ross & Son Company | All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear...voir plus All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear particles and droplets, and expel material at high velocity into the surrounding mix, creating intense hydraulic shear. voir moins |  |
| PreMax | Charles Ross & Son Company | This single-stage rotor/stator generator is specially contoured to generate both high shear and vigorous flow in a batch mixing environment. Designed especially for pigment dispersions, the Delta rotor/stator generator is used in the Ross PreMax* to produ...voir plus This single-stage rotor/stator generator is specially contoured to generate both high shear and vigorous flow in a batch mixing environment. Designed especially for pigment dispersions, the Delta rotor/stator generator is used in the Ross PreMax* to produce an intense combination of mechanical, hydraulic and cavitational shear, which results in aggressive deagglomeration. voir moins |  |
| Ribbon Blender | Charles Ross & Son Company | Ribbon Blenders are ideal for powder blending applications. The dual action ribbon agitator creates an intimate blend in a short cycle time. Ross stocks Ribbon Blenders in many sizes from 1 - 100 cu.ft. working capacity. |  |
| Sanitary Mixers | Charles Ross & Son Company | Ross serves the requirements of the Food, Cosmetic and Pharmaceutical industries, in virtually every industrialized country around the world. We have the experience and production capacity that no other manufacturer of specialty mixing and blending equipm...voir plus Ross serves the requirements of the Food, Cosmetic and Pharmaceutical industries, in virtually every industrialized country around the world. We have the experience and production capacity that no other manufacturer of specialty mixing and blending equipment can match. voir moins |  |
| Static/Motionless Mixers | Charles Ross & Son Company | Ross LPD/LLPD (low pressure drop) and ISG (interfacial surface generator) Motionless Mixers are well known for their wide ranging uses in turbulent and laminar flow mixing applications. |  |
| Systems And Controls | Charles Ross & Son Company | Ross Systems and Controls (SysCon) is a leading worldwide supplier of control systems. We offer packages that range from simple on/off switches to sophisticated PLC based recipe systems. Each system, standard or custom, is designed to meet your specific n...voir plus Ross Systems and Controls (SysCon) is a leading worldwide supplier of control systems. We offer packages that range from simple on/off switches to sophisticated PLC based recipe systems. Each system, standard or custom, is designed to meet your specific needs. voir moins |  |
| Three Roll Mill | Charles Ross & Son Company | When Ross produced the first Three Roll Mill more than 80 years ago, we revolutionized pigment dispersion — with superior consistency and finer dispersion than ever before. Today the original Ross Three Roll Mills are still the standard by which all other...voir plus When Ross produced the first Three Roll Mill more than 80 years ago, we revolutionized pigment dispersion — with superior consistency and finer dispersion than ever before. Today the original Ross Three Roll Mills are still the standard by which all others are measured — in applications as diverse as magnetic coatings, cosmetics, paints, inks and high performance ceramics. voir moins |  |
| Tumble Blenders | Charles Ross & Son Company | Ross Tumble Blenders are supplied with generous standard features, including double cone design in 316 stainless steel construction, manually operated Butterfly valve for discharge - 24” discharge clearance Hinged stainless steel charging opening, mirror ...voir plus Ross Tumble Blenders are supplied with generous standard features, including double cone design in 316 stainless steel construction, manually operated Butterfly valve for discharge - 24” discharge clearance Hinged stainless steel charging opening, mirror finish on interior surfaces, 150 grit finish on exterior surfaces, and the non-stainless steel components are finished with a durable two-component paint. voir moins |  |
| Vertical Blender | Charles Ross & Son Company | Ross Vertical Blenders provide an excellent design alternative for applications when your product is shear sensitive or your process parameters are critical Products that require low-impact blending are best handled in a Ross Vertical Blender. The blendin...voir plus Ross Vertical Blenders provide an excellent design alternative for applications when your product is shear sensitive or your process parameters are critical Products that require low-impact blending are best handled in a Ross Vertical Blender. The blending action of the slow-turning blending screw is far more gentle than the agitators in a Ribbon Blender of the same working volume. voir moins |  |
