| Aldirez BH | Incorez Ltd. | Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where ...voir plus Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where it is used to prevent gassing in sealant and adhesive applications. voir moins | |
| Amirez 142 | Incorez Ltd. | Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitabl...voir plus Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitable for floor nd wall applications. It has rapid hardness development as well as good anti-corrosion and chemical resistance. It has improved flexibility, excellent aqueous dilution stability, and a fast cure with visible end of pot life. voir moins | |
| Amirez 148/010 | Incorez Ltd. | Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosi...voir plus Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosity, zero VOC, and good freeze/thaw stability. It is completely compatible with cement and calcium salt and is particularly well suited for high temperature climates. Incorez 148/010 is used fro floor and wall paints, hygiene coatings, concrete primers, and gloss paints. voir moins | |
| Amirez 148/024 | Incorez Ltd. | Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and...voir plus Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and good freeze/thaw stability. It has fast cure and excellent gloss retention and chemical resistance. Incorez 148/024 is used for floor and wall paints, anti-graffiti coatings, concrete primers, and gloss paints. voir moins | |
| Amirez 148/055 | Incorez Ltd. | Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure devel...voir plus Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure development. voir moins | |
| CS-200 | Glassfillers.com (A unit of Vitrominerals Inc.) | CS-200, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Gla...voir plus CS-200, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Glass powder contains no crystalline silica and is fully amorphous. CS-200 deals clean post-consumer filler for polymer-based systems where the uppermost brightness is not essential. The filler imparts chemical stability and admirable abrasion resistance to coatings and other polymer systems. CS-200 has a specific gravity of 2.5, a bulk density of 63 lb/ft3, a hegman value of 2, a pH of 10 to 11, a refractive index of 1.56, and a brightness of 78 to 83. voir moins | |
| CS-325 | Glassfillers.com (A unit of Vitrominerals Inc.) | CS-325, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Gla...voir plus CS-325, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Glass powder contains no crystalline silica and is fully amorphous. CS-325 deals clean post-consumer filler for polymer-based systems where the uppermost brightness is not essential. The filler imparts chemical stability and admirable abrasion resistance to coatings and other polymer systems. CS-325 has a specific gravity of 2.5, a bulk density of 60 lb/ft3, a hegman value of 3, a pH of 10 to 11, a refractive index of 1.56, and a brightness of 80 to 85. voir moins | |
| CS-400 | Glassfillers.com (A unit of Vitrominerals Inc.) | CS-400, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Gla...voir plus CS-400, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Glass powder contains no crystalline silica and is fully amorphous. CS-400 deals clean post-consumer filler for polymer-based systems where the uppermost brightness is not essential. The filler imparts chemical stability and admirable abrasion resistance to coatings and other polymer systems. CS-400 has a specific gravity of 2.5, a bulk density of 50 lb/ft3, a hegman value of 4 to 5, a pH of 10 to 11, a refractive index of 1.56, and a brightness of 85 to 90. voir moins | |
| Dispurez® 103 | Incorez Ltd. | Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived fro...voir plus Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived from Dispurez® 103 exhibit good chemical, stain and hydrolysis resistance, making them a suitable non-hazardous foundation for durable rigid plastics, flexible films and waterproofing applications. voir moins | |
| Incorez STP | Incorez Ltd. | Incorez STP is a Silane Terminated Polyurethane that combines the properties of polyurethane with those of a silicone but without their respective drawbacks. This prepolymer is primarily designed to act as a binder for moisture-curing sealants and elastic...voir plus Incorez STP is a Silane Terminated Polyurethane that combines the properties of polyurethane with those of a silicone but without their respective drawbacks. This prepolymer is primarily designed to act as a binder for moisture-curing sealants and elastic adhesives. It is a high molecular weight prepolymer consisting of a polyurethane backbone and a tri-functional silane end group. voir moins | |
| Incorez STP | Incorez Ltd. | Incorez STP is an aliphatic silane terminated polyurethane that combines the properties of polyurethane with those of a silicone but without their respective drawbacks. This pre-polymer is primarily designed to act as a binder for moisture-curing sealants...voir plus Incorez STP is an aliphatic silane terminated polyurethane that combines the properties of polyurethane with those of a silicone but without their respective drawbacks. This pre-polymer is primarily designed to act as a binder for moisture-curing sealants and elastic adhesives. It is a high molecular weight pre-polymer consisting of a polyurethane backbone and a tri-functional silane end group. voir moins | |
| Incorez W2205 | Incorez Ltd. | Incorez W2205 is an universal hard grade with good balance of chemical and physical resistance properties. It has excellent gloss and rapid hardness development. It is used for wood finishes, coatings for plastics, mulit-surface, floor, and wall paints. T...voir plus Incorez W2205 is an universal hard grade with good balance of chemical and physical resistance properties. It has excellent gloss and rapid hardness development. It is used for wood finishes, coatings for plastics, mulit-surface, floor, and wall paints. This product is part of the Incorez W2005 series, which is a range of NMP free, aliphatic polyurethane/acrylic hybrid dispersions. The series combines the performance advantages of urethanes such as toughness, abrasion resistance, and flexibility, with those of acrylics including weatherability, hardness and pigmentability. voir moins | |
| Incorez W2605 | Incorez Ltd. | Incorez W2605 is a hard yet flexible system with excellent alcohol and water resistance. It has good print properties and has excellent adhesion to many substrates. It is used in wood finishes, paper coatings, print-receptive coatings, as well as inks and...voir plus Incorez W2605 is a hard yet flexible system with excellent alcohol and water resistance. It has good print properties and has excellent adhesion to many substrates. It is used in wood finishes, paper coatings, print-receptive coatings, as well as inks and over-print lacquers. This product is part of the Incorez W2005 series, which is a range of NMP free, aliphatic polyurethane/acrylic hybrid dispersions. The series combines the performance advantages of urethanes such as toughness, abrasion resistance, and flexibility, with those of acrylics including weatherability, hardness and pigmentability. voir moins | |
| Incorez W835/140 | Incorez Ltd. | Incorez W835/140 is a NMP free, water based polyurethane dispersion. It has excellent chemical and stain resistance as well as good compatibility with acrylic emulsions. It is used in ink and print applications and floor and wall coatings. This product is...voir plus Incorez W835/140 is a NMP free, water based polyurethane dispersion. It has excellent chemical and stain resistance as well as good compatibility with acrylic emulsions. It is used in ink and print applications and floor and wall coatings. This product is a part of the Incorez W835 series which has been developed to offer superior performance with the added benifits of no NMP and low VOC content. Furthermore, they are low irritancy and non-harmful, thus allowing formulators to meet increasingly stringent regulations. voir moins | |
| Incorez W835/177 | Incorez Ltd. | Incorez W835/177 is a NMP free, co-solvent free polyurethane dispersion. It has excellent mechanical properties, impact resistance, and adhesion to plastics. It is used for plastic coatings. This product is a part of the Incorez W835 series which has been...voir plus Incorez W835/177 is a NMP free, co-solvent free polyurethane dispersion. It has excellent mechanical properties, impact resistance, and adhesion to plastics. It is used for plastic coatings. This product is a part of the Incorez W835 series which has been developed to offer superior performance with the added benifits of no NMP and low VOC content. Furthermore, they are low irritancy and non-harmful, thus allowing formulators to meet increasingly stringent regulations. voir moins | |
| Incorez W835/256 | Incorez Ltd. | Incorez W835/256 is a NMP free polyurethane dispersion. It is a self-crosslinking PUD with excellent chemical and stain resistance. It is used in wall and floor coatings as well as coatings for wood/parquet flooring. This product is a part of the Incorez ...voir plus Incorez W835/256 is a NMP free polyurethane dispersion. It is a self-crosslinking PUD with excellent chemical and stain resistance. It is used in wall and floor coatings as well as coatings for wood/parquet flooring. This product is a part of the Incorez W835 series which has been developed to offer superior performance with the added benifits of no NMP and low VOC content. Furthermore, they are low irritancy and non-harmful, thus allowing formulators to meet increasingly stringent regulations. voir moins | |
| Incorez W835/494 | Incorez Ltd. | Incorez W835/494 is a NMP free polyurethane dispersion. It is a non irritant, co-solvent free product with a tough backbone and excellent water resistance. It is used in textile soft-feel coatings, coatings for plastics, and biomedical devices. This produ...voir plus Incorez W835/494 is a NMP free polyurethane dispersion. It is a non irritant, co-solvent free product with a tough backbone and excellent water resistance. It is used in textile soft-feel coatings, coatings for plastics, and biomedical devices. This product is a part of the Incorez W835 series which has been developed to offer superior performance with the added benifits of no NMP and low VOC content. Furthermore, they are low irritancy and non-harmful, thus allowing formulators to meet increasingly stringent regulations. voir moins | |
| Incozol 2 | Incorez Ltd. | Incozol 2 acts as an effective moisture scavenger in polyurethane coatings and sealants. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and...voir plus Incozol 2 acts as an effective moisture scavenger in polyurethane coatings and sealants. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and prevents bubbling and downglossing caused by high moisture levels either on the substrate or from the atmosphere. Incozol 2 is used in one or two component systems but is not generally recommended in one component systems with a low NCO content. voir moins | |
| Incozol 4 | Incorez Ltd. | Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in both one and two component PU systems. In one component systems it i...voir plus Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in both one and two component PU systems. In one component systems it is normally used with aliphatic prepolymers. In two component systems it can also be used with aromatic prepolymers or isocyanates. voir moins | |
| Incozol BH | Incorez Ltd. | Incozol BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker and benzaldehyde. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic p...voir plus Incozol BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker and benzaldehyde. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers. voir moins | |
| Incozol EH | Incorez Ltd. | Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings, adhesives, sealants and elastomers. Used in conjunction with a low NCO polyurethane prepolymer, this hardener accelerates the cure of the prepolymer through ...voir plus Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings, adhesives, sealants and elastomers. Used in conjunction with a low NCO polyurethane prepolymer, this hardener accelerates the cure of the prepolymer through a moisture triggered mechanism to afford crosslinking benefits to the 1K urethane. In addition, it enhances properties such as through cure development and mechanical strength through the elimination of CO2 gassing in high build, high solids PU systems. Incozol EH confers tolerance to the repeated opening of containers and can be used as a versatile curing agent with 2 or 4 functional mix ratios. It can also be handled and stored at temperatures as low as -15ºC without risk of crystallisation. voir moins | |
| Incozol LV | Incorez Ltd. | Incozol LV is a reactive diluent designed to help producers of polyurethane coatings and sealants attain low VOC systems. It is used in the formulation of two component coatings where Incozol LV replaces a portion of the polyol component, for example, aut...voir plus Incozol LV is a reactive diluent designed to help producers of polyurethane coatings and sealants attain low VOC systems. It is used in the formulation of two component coatings where Incozol LV replaces a portion of the polyol component, for example, automotive refinish and OEM coatings. Other uses include high solids PU coatings for boats, industrial maintenance, aircraft, automotive sealants, anti-graffiti lacquers and waterproof coatings. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LA-300 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-300, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction an...voir plus LA-300, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (22). LA-300 has a specific gravity of 2.45, a bulk density of 50 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. voir moins | |
| LA-350 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-350, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...voir plus LA-350, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (23). LA-350 has a specific gravity of 2.45, a bulk density of 50 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. voir moins | |
| LA-400 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction an...voir plus LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (24). LA-400 has a specific gravity of 2.45, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. voir moins | |
| LA-500 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...voir plus LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (25). LA-500 has a specific gravity of 2.5, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.51. voir moins | |
| LA-600 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...voir plus LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (27). LA-600 has a specific gravity of 2.5, a bulk density of 43 lb/ft3, a pH of 10.5, and a refractive index of 1.51. voir moins | |
| LA-700 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...voir plus LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (28). LA-700 has a specific gravity of 2.5, a bulk density of 40 lb/ft3, a pH of 10.5, and a refractive index of 1.51. voir moins | |
| LA-800 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...voir plus LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (29). LA-800 has a specific gravity of 2.5, a bulk density of 35 lb/ft3, a pH of 10.5, and a refractive index of 1.51. voir moins | |
| Pyrogenic Silica RS-50 | Glassfillers.com (A unit of Vitrominerals Inc.) | Pyrogenic Silica RS-50 is a hydrophilic, 100% recycled synthetic, fully X-ray amorphous silica, produced by flame hydrolysis. It is a white, submicron-sized powder of great purity and a surface area of 20 to 50 m2/g. RS-50 is effective as a thixotropic r...voir plus Pyrogenic Silica RS-50 is a hydrophilic, 100% recycled synthetic, fully X-ray amorphous silica, produced by flame hydrolysis. It is a white, submicron-sized powder of great purity and a surface area of 20 to 50 m2/g. RS-50 is effective as a thixotropic rheology control and thickening agent in many polymer systems, such as unsaturated polyesters, adhesives, sealants, coatings, printing inks, etc. It can be used as active strengthening filler in silicone-elastomers and elastomers. Pyrogenic Silica RS-50 has a specific gravity of 2.2, a bulk density of 23 to 25 lb/ft3 vibrated, oil absorption of 65 g/100g, a pH of 6.0 (4% dispersion in water), a refractive index of 1.46, and a softening temperature of ~1600 °C. voir moins | |
| WhiteLite™ WL-32 | Glassfillers.com (A unit of Vitrominerals Inc.) | WhiteLite™ WL-32 Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight th...voir plus WhiteLite™ WL-32 Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight than traditional naturally mined mineral fillers, which permits larger volumetric extension when used in plastics and coatings. WL-32 improves a wide range of plastics, paints, adhesives, and coatings. Great reliable brightness, stain/scrub resistance, and tint retention can be accomplished in most coating and paint systems. WL-32 has a bulk density of 50 lb/ft3, oil absorption of 22, a pH of 7 ± 1, a refractive index of 1.5, a hegman value of 4, and a brightness of 90 to 91 photovolt Y value. voir moins | |
| WL-42 | Glassfillers.com (A unit of Vitrominerals Inc.) | WL-42, WhiteLite™ Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight t...voir plus WL-42, WhiteLite™ Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight than traditional naturally mined mineral fillers, which permits larger volumetric extension when used in plastics and coatings. WL-42 improves a wide range of plastics, paints, adhesives, and coatings. Great reliable brightness, stain/scrub resistance, and tint retention can be accomplished in most coating and paint systems. WL-42 has a bulk density of 40 lb/ft3, oil absorption of 25, a pH of 7 ± 1, a refractive index of 1.5, a hegman value of 2, and a brightness of 90 to 91 photovolt Y value. voir moins | |
| 2K PU Heavy Duty Protective Coating (Formulation #Inz 2/LV Clear - 001) | Incorez Ltd. | This formulation is for an automotive refinish clearcoat using the Incozol product line. | |
| 2K Waterborne Floor Paint - Glossy Grey (Formulation #142-013) | Incorez Ltd. | This formulation is a grey gloss floor paint that utilizes the product Amirez 142. | |
| 2K Waterborne Floor Paint - Matt Grey (Formulation #142 - 024) | Incorez Ltd. | This formulation is a grey matt floor paint that utilizes Amirez 142. | |
| 2K Waterborne Floor Paint - Semi-Glossy Red (Formulation #148/024 - 025) | Incorez Ltd. | This formulation is for a red gloss floor paint that utilizes the product Amirez 148/024. | |
| 2K Waterborne Primer - Clear (Formulation #148/010 - 016) | Incorez Ltd. | This formulation is a clear concrete primer for two pack waterborne epoxy systems. It features excellent adhesion, high gloss, a long pot life, and utilizes the product Amirez 148/010. | |
| 2K Waterborne Primer - Clear (Formulation #148/024 - 017) | Incorez Ltd. | This formulation is a clear concrete primer for two pack waterborne epoxy systems. It features excellent adhesion, high gloss, good hardness, faster drying and utilizes the product Amirez 148/024. | |
| 2K Waterborne Sealer - Clear (Formulation #142 - 019) | Incorez Ltd. | This formulation is a clear concrete sealer for waterborne epoxy systems. It features high gloss, excellent hardness, good chemical and water resistance that utilizes the product Amirez 142. | |
| 2K Waterborne Sealer - Clear (Formulation #148/024 - 018) | Incorez Ltd. | This formulation is a clear concrete sealer that features a high gloss, good hardness, excellent chemical and water resistance that utilizes Amirez 148/024. | |
| Self-Levelling Floor Coating | Incorez Ltd. | This formulation can be applied over damp and/or green concrete with minimal shrinkage and fast hardness and strength development. | |
| White Gloss using Incorez 142 & Incorez 148/024 | Incorez Ltd. | This formulation is a white gloss wall paint that utilizes the products Incorez 142 & Incorez 148/024. | |
| Automated Discharge Systems | Charles Ross & Son Company | A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipm...voir plus A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipment, an extruder, or a two or three-roll mill. voir moins |  |
| Double Planetary Mixer | Charles Ross & Son Company | Ross pioneered the Double Planetary Mixer design more than 60 years ago. Design updates make this mixer suitable for use in applications up to 7,000,000 centipoise. A high speed design variation is also available. |  |
| High Shear Mixer | Charles Ross & Son Company | All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear...voir plus All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear particles and droplets, and expel material at high velocity into the surrounding mix, creating intense hydraulic shear. voir moins |  |
| High Speed Disperser | Charles Ross & Son Company | Ross High Speed Dispersers are the industry standard for durability, faster dispersion and low maintenance costs. Standard models include: explosion-proof, inverter duty motors; heavy duty V-belt drives and bearings; safety switches; an air/oil hydraulic ...voir plus Ross High Speed Dispersers are the industry standard for durability, faster dispersion and low maintenance costs. Standard models include: explosion-proof, inverter duty motors; heavy duty V-belt drives and bearings; safety switches; an air/oil hydraulic lift system with hand/foot controls; and stainless steel wetted parts and shaft guard. Sizes range from 1/2 HP to 200 HP to handle batches from 1 to 2000 gallons. Custom designs are also available. voir moins |  |
| Multi-Shaft Mixer | Charles Ross & Son Company | We offer Dual and Triple Shaft designs to meet your specific process requirements. Our economical Dual Shaft design includes a conventional high speed disperser and a two wing anchor agitator. This configuration is ideal for straight forward dispersion an...voir plus We offer Dual and Triple Shaft designs to meet your specific process requirements. Our economical Dual Shaft design includes a conventional high speed disperser and a two wing anchor agitator. This configuration is ideal for straight forward dispersion and mixing applications. voir moins |  |
| Planetary Dispersers | Charles Ross & Son Company | The patented Planetary Disperser combines a planetary blade and a high speed dispersion blade. The planetary and the high speed disperser blades rotate on their own axes and also rotate continuously around the vessel. The planetary blade feeds materials ...voir plus The patented Planetary Disperser combines a planetary blade and a high speed dispersion blade. The planetary and the high speed disperser blades rotate on their own axes and also rotate continuously around the vessel. The planetary blade feeds materials directly into the high shear zone of the orbiting high speed disperser. This combination of unique mixing actions eliminate the need for multiple mixers i.e. 2 technologies in one machine. voir moins |  |
| Powder Induction | Charles Ross & Son Company | All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear...voir plus All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear particles and droplets, and expel material at high velocity into the surrounding mix, creating intense hydraulic shear. voir moins |  |
| PreMax | Charles Ross & Son Company | This single-stage rotor/stator generator is specially contoured to generate both high shear and vigorous flow in a batch mixing environment. Designed especially for pigment dispersions, the Delta rotor/stator generator is used in the Ross PreMax* to produ...voir plus This single-stage rotor/stator generator is specially contoured to generate both high shear and vigorous flow in a batch mixing environment. Designed especially for pigment dispersions, the Delta rotor/stator generator is used in the Ross PreMax* to produce an intense combination of mechanical, hydraulic and cavitational shear, which results in aggressive deagglomeration. voir moins |  |
| Ribbon Blender | Charles Ross & Son Company | Ribbon Blenders are ideal for powder blending applications. The dual action ribbon agitator creates an intimate blend in a short cycle time. Ross stocks Ribbon Blenders in many sizes from 1 - 100 cu.ft. working capacity. |  |
| Sanitary Mixers | Charles Ross & Son Company | Ross serves the requirements of the Food, Cosmetic and Pharmaceutical industries, in virtually every industrialized country around the world. We have the experience and production capacity that no other manufacturer of specialty mixing and blending equipm...voir plus Ross serves the requirements of the Food, Cosmetic and Pharmaceutical industries, in virtually every industrialized country around the world. We have the experience and production capacity that no other manufacturer of specialty mixing and blending equipment can match. voir moins |  |
| Static/Motionless Mixers | Charles Ross & Son Company | Ross LPD/LLPD (low pressure drop) and ISG (interfacial surface generator) Motionless Mixers are well known for their wide ranging uses in turbulent and laminar flow mixing applications. |  |
| Systems And Controls | Charles Ross & Son Company | Ross Systems and Controls (SysCon) is a leading worldwide supplier of control systems. We offer packages that range from simple on/off switches to sophisticated PLC based recipe systems. Each system, standard or custom, is designed to meet your specific n...voir plus Ross Systems and Controls (SysCon) is a leading worldwide supplier of control systems. We offer packages that range from simple on/off switches to sophisticated PLC based recipe systems. Each system, standard or custom, is designed to meet your specific needs. voir moins |  |
| Three Roll Mill | Charles Ross & Son Company | When Ross produced the first Three Roll Mill more than 80 years ago, we revolutionized pigment dispersion — with superior consistency and finer dispersion than ever before. Today the original Ross Three Roll Mills are still the standard by which all other...voir plus When Ross produced the first Three Roll Mill more than 80 years ago, we revolutionized pigment dispersion — with superior consistency and finer dispersion than ever before. Today the original Ross Three Roll Mills are still the standard by which all others are measured — in applications as diverse as magnetic coatings, cosmetics, paints, inks and high performance ceramics. voir moins |  |
| Tumble Blenders | Charles Ross & Son Company | Ross Tumble Blenders are supplied with generous standard features, including double cone design in 316 stainless steel construction, manually operated Butterfly valve for discharge - 24” discharge clearance Hinged stainless steel charging opening, mirror ...voir plus Ross Tumble Blenders are supplied with generous standard features, including double cone design in 316 stainless steel construction, manually operated Butterfly valve for discharge - 24” discharge clearance Hinged stainless steel charging opening, mirror finish on interior surfaces, 150 grit finish on exterior surfaces, and the non-stainless steel components are finished with a durable two-component paint. voir moins |  |
| Vertical Blender | Charles Ross & Son Company | Ross Vertical Blenders provide an excellent design alternative for applications when your product is shear sensitive or your process parameters are critical Products that require low-impact blending are best handled in a Ross Vertical Blender. The blendin...voir plus Ross Vertical Blenders provide an excellent design alternative for applications when your product is shear sensitive or your process parameters are critical Products that require low-impact blending are best handled in a Ross Vertical Blender. The blending action of the slow-turning blending screw is far more gentle than the agitators in a Ribbon Blender of the same working volume. voir moins |  |
