| Aldirez BH | Incorez Ltd. | Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where ...voir plus Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where it is used to prevent gassing in sealant and adhesive applications. voir moins | |
| Amirez 142 | Incorez Ltd. | Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitabl...voir plus Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitable for floor nd wall applications. It has rapid hardness development as well as good anti-corrosion and chemical resistance. It has improved flexibility, excellent aqueous dilution stability, and a fast cure with visible end of pot life. voir moins | |
| Amirez 148/010 | Incorez Ltd. | Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosi...voir plus Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosity, zero VOC, and good freeze/thaw stability. It is completely compatible with cement and calcium salt and is particularly well suited for high temperature climates. Incorez 148/010 is used fro floor and wall paints, hygiene coatings, concrete primers, and gloss paints. voir moins | |
| Amirez 148/024 | Incorez Ltd. | Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and...voir plus Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and good freeze/thaw stability. It has fast cure and excellent gloss retention and chemical resistance. Incorez 148/024 is used for floor and wall paints, anti-graffiti coatings, concrete primers, and gloss paints. voir moins | |
| Amirez 148/055 | Incorez Ltd. | Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure devel...voir plus Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure development. voir moins | |
| Dispurez® 103 | Incorez Ltd. | Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived fro...voir plus Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived from Dispurez® 103 exhibit good chemical, stain and hydrolysis resistance, making them a suitable non-hazardous foundation for durable rigid plastics, flexible films and waterproofing applications. voir moins | |
| Incorez STP | Incorez Ltd. | Incorez STP is an aliphatic silane terminated polyurethane that combines the properties of polyurethane with those of a silicone but without their respective drawbacks. This pre-polymer is primarily designed to act as a binder for moisture-curing sealants...voir plus Incorez STP is an aliphatic silane terminated polyurethane that combines the properties of polyurethane with those of a silicone but without their respective drawbacks. This pre-polymer is primarily designed to act as a binder for moisture-curing sealants and elastic adhesives. It is a high molecular weight pre-polymer consisting of a polyurethane backbone and a tri-functional silane end group. voir moins | |
| Incorez STP | Incorez Ltd. | Incorez STP is a Silane Terminated Polyurethane that combines the properties of polyurethane with those of a silicone but without their respective drawbacks. This prepolymer is primarily designed to act as a binder for moisture-curing sealants and elastic...voir plus Incorez STP is a Silane Terminated Polyurethane that combines the properties of polyurethane with those of a silicone but without their respective drawbacks. This prepolymer is primarily designed to act as a binder for moisture-curing sealants and elastic adhesives. It is a high molecular weight prepolymer consisting of a polyurethane backbone and a tri-functional silane end group. voir moins | |
| Incorez W2205 | Incorez Ltd. | Incorez W2205 is an universal hard grade with good balance of chemical and physical resistance properties. It has excellent gloss and rapid hardness development. It is used for wood finishes, coatings for plastics, mulit-surface, floor, and wall paints. T...voir plus Incorez W2205 is an universal hard grade with good balance of chemical and physical resistance properties. It has excellent gloss and rapid hardness development. It is used for wood finishes, coatings for plastics, mulit-surface, floor, and wall paints. This product is part of the Incorez W2005 series, which is a range of NMP free, aliphatic polyurethane/acrylic hybrid dispersions. The series combines the performance advantages of urethanes such as toughness, abrasion resistance, and flexibility, with those of acrylics including weatherability, hardness and pigmentability. voir moins | |
| Incorez W2605 | Incorez Ltd. | Incorez W2605 is a hard yet flexible system with excellent alcohol and water resistance. It has good print properties and has excellent adhesion to many substrates. It is used in wood finishes, paper coatings, print-receptive coatings, as well as inks and...voir plus Incorez W2605 is a hard yet flexible system with excellent alcohol and water resistance. It has good print properties and has excellent adhesion to many substrates. It is used in wood finishes, paper coatings, print-receptive coatings, as well as inks and over-print lacquers. This product is part of the Incorez W2005 series, which is a range of NMP free, aliphatic polyurethane/acrylic hybrid dispersions. The series combines the performance advantages of urethanes such as toughness, abrasion resistance, and flexibility, with those of acrylics including weatherability, hardness and pigmentability. voir moins | |
| Incorez W835/140 | Incorez Ltd. | Incorez W835/140 is a NMP free, water based polyurethane dispersion. It has excellent chemical and stain resistance as well as good compatibility with acrylic emulsions. It is used in ink and print applications and floor and wall coatings. This product is...voir plus Incorez W835/140 is a NMP free, water based polyurethane dispersion. It has excellent chemical and stain resistance as well as good compatibility with acrylic emulsions. It is used in ink and print applications and floor and wall coatings. This product is a part of the Incorez W835 series which has been developed to offer superior performance with the added benifits of no NMP and low VOC content. Furthermore, they are low irritancy and non-harmful, thus allowing formulators to meet increasingly stringent regulations. voir moins | |
| Incorez W835/177 | Incorez Ltd. | Incorez W835/177 is a NMP free, co-solvent free polyurethane dispersion. It has excellent mechanical properties, impact resistance, and adhesion to plastics. It is used for plastic coatings. This product is a part of the Incorez W835 series which has been...voir plus Incorez W835/177 is a NMP free, co-solvent free polyurethane dispersion. It has excellent mechanical properties, impact resistance, and adhesion to plastics. It is used for plastic coatings. This product is a part of the Incorez W835 series which has been developed to offer superior performance with the added benifits of no NMP and low VOC content. Furthermore, they are low irritancy and non-harmful, thus allowing formulators to meet increasingly stringent regulations. voir moins | |
| Incorez W835/256 | Incorez Ltd. | Incorez W835/256 is a NMP free polyurethane dispersion. It is a self-crosslinking PUD with excellent chemical and stain resistance. It is used in wall and floor coatings as well as coatings for wood/parquet flooring. This product is a part of the Incorez ...voir plus Incorez W835/256 is a NMP free polyurethane dispersion. It is a self-crosslinking PUD with excellent chemical and stain resistance. It is used in wall and floor coatings as well as coatings for wood/parquet flooring. This product is a part of the Incorez W835 series which has been developed to offer superior performance with the added benifits of no NMP and low VOC content. Furthermore, they are low irritancy and non-harmful, thus allowing formulators to meet increasingly stringent regulations. voir moins | |
| Incorez W835/494 | Incorez Ltd. | Incorez W835/494 is a NMP free polyurethane dispersion. It is a non irritant, co-solvent free product with a tough backbone and excellent water resistance. It is used in textile soft-feel coatings, coatings for plastics, and biomedical devices. This produ...voir plus Incorez W835/494 is a NMP free polyurethane dispersion. It is a non irritant, co-solvent free product with a tough backbone and excellent water resistance. It is used in textile soft-feel coatings, coatings for plastics, and biomedical devices. This product is a part of the Incorez W835 series which has been developed to offer superior performance with the added benifits of no NMP and low VOC content. Furthermore, they are low irritancy and non-harmful, thus allowing formulators to meet increasingly stringent regulations. voir moins | |
| Incozol 2 | Incorez Ltd. | Incozol 2 acts as an effective moisture scavenger in polyurethane coatings and sealants. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and...voir plus Incozol 2 acts as an effective moisture scavenger in polyurethane coatings and sealants. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and prevents bubbling and downglossing caused by high moisture levels either on the substrate or from the atmosphere. Incozol 2 is used in one or two component systems but is not generally recommended in one component systems with a low NCO content. voir moins | |
| Incozol 4 | Incorez Ltd. | Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in both one and two component PU systems. In one component systems it i...voir plus Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in both one and two component PU systems. In one component systems it is normally used with aliphatic prepolymers. In two component systems it can also be used with aromatic prepolymers or isocyanates. voir moins | |
| Incozol BH | Incorez Ltd. | Incozol BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker and benzaldehyde. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic p...voir plus Incozol BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker and benzaldehyde. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers. voir moins | |
| Incozol EH | Incorez Ltd. | Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings, adhesives, sealants and elastomers. Used in conjunction with a low NCO polyurethane prepolymer, this hardener accelerates the cure of the prepolymer through ...voir plus Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings, adhesives, sealants and elastomers. Used in conjunction with a low NCO polyurethane prepolymer, this hardener accelerates the cure of the prepolymer through a moisture triggered mechanism to afford crosslinking benefits to the 1K urethane. In addition, it enhances properties such as through cure development and mechanical strength through the elimination of CO2 gassing in high build, high solids PU systems. Incozol EH confers tolerance to the repeated opening of containers and can be used as a versatile curing agent with 2 or 4 functional mix ratios. It can also be handled and stored at temperatures as low as -15ºC without risk of crystallisation. voir moins | |
| Incozol LV | Incorez Ltd. | Incozol LV is a reactive diluent designed to help producers of polyurethane coatings and sealants attain low VOC systems. It is used in the formulation of two component coatings where Incozol LV replaces a portion of the polyol component, for example, aut...voir plus Incozol LV is a reactive diluent designed to help producers of polyurethane coatings and sealants attain low VOC systems. It is used in the formulation of two component coatings where Incozol LV replaces a portion of the polyol component, for example, automotive refinish and OEM coatings. Other uses include high solids PU coatings for boats, industrial maintenance, aircraft, automotive sealants, anti-graffiti lacquers and waterproof coatings. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| PEL-CAT CA100 | Ele Corporation | PEL-CAT CA100 is an efficient tertiary amine accelerator and curing agent for epoxy resin systems. It is a technical preparation of Tris-(Dimethylaminomethyl) Phenol, a Mannich base. This product functions as a Lewis base containing unshared electrons tha...voir plus PEL-CAT CA100 is an efficient tertiary amine accelerator and curing agent for epoxy resin systems. It is a technical preparation of Tris-(Dimethylaminomethyl) Phenol, a Mannich base. This product functions as a Lewis base containing unshared electrons that facilitate the operning of the oxirane ring of epoxides. This compound shows marked acceleration because of the presence of the phenolic hydroxyl group. It is an activator for curing agents such as polyamides, amidoamines and amine adducts. PEL-CAT CA100 finds use in many applications including adhesives, casting and flooring. The low volatility of this product minimizes odors. voir moins | |
| PEL-EST CF190 | Ele Corporation | PEL-EST CF190 is propoxylated castor oil based non-silicone defoamer. It retains the fluidity of the original oil and is useful in the formation of organic defoamers. PEL-EST CF190 is water-dispersable. It is an excellent choice as a natural and renewab...voir plus PEL-EST CF190 is propoxylated castor oil based non-silicone defoamer. It retains the fluidity of the original oil and is useful in the formation of organic defoamers. PEL-EST CF190 is water-dispersable. It is an excellent choice as a natural and renewable organic defoamer. voir moins | |
| PEL-HIB CC220 | Ele Corporation | PEL-HIB CC220 corrosion inhibitor is an amine borate ester suitable for use with aluminum and steel substrates. Originally introduced as an alternative to nitrites, it affords the same level of protection to ferrous materials. It provides excellent rust i...voir plus PEL-HIB CC220 corrosion inhibitor is an amine borate ester suitable for use with aluminum and steel substrates. Originally introduced as an alternative to nitrites, it affords the same level of protection to ferrous materials. It provides excellent rust inhibition and aids lubrication. PEL-HIB CC220 is very water soluble. In addition to its applications in metalworking fluids and coolants, cooling water and boiler operations, oil well and refinery operations, fuels, lubricants and greases, PEL-HIB CC220 also finds its uses in inorganic coatings, organic coatings, and printing inks. voir moins | |
| PEL-PAG CF240 | Ele Corporation | PEL-PAG CF240 is a water-soluble, non-silicone defoamer. It is butanol alkoxylated. PEL-PAG CF240 is used as a defoamer in waterborne paint and coatings. It can also be used as freeze-thaw stabilizer for latexes emulsions. | |
| PEL-PHOS CD260 | Ele Corporation | PEL-PHOS CD260 is a dispersant, lubricant, anti-wear additive, corrosion inhibitor, wetting agent, emulsifier, and detergent. It is both biodegradable and a non-ecotoxic surfactant. PEL-PHOS CD260 can also be used as co-emulsifier for emulsion polymerizat...voir plus PEL-PHOS CD260 is a dispersant, lubricant, anti-wear additive, corrosion inhibitor, wetting agent, emulsifier, and detergent. It is both biodegradable and a non-ecotoxic surfactant. PEL-PHOS CD260 can also be used as co-emulsifier for emulsion polymerization. voir moins | |
| PEL-PHOS CD270 | Ele Corporation | PEL-PHOS CD270 is an aqueous solution of the sodium salt of a medium HLB, aromatic, phosphate ester. PEL-PHOS CD270 is a useful pigment dispersion agent for the manufacture of paints. It is also a detergent, foamer, co...voir plus PEL-PHOS CD270 is an aqueous solution of the sodium salt of a medium HLB, aromatic, phosphate ester. PEL-PHOS CD270 is a useful pigment dispersion agent for the manufacture of paints. It is also a detergent, foamer, corrosion inhibitor, emulsifier for detergent concentrates & metalworking fluids, FDA, EPA compliance. voir moins | |
| PEL-PHOS CE250 | Ele Corporation | PEL-PHOS CE250 is a phosphate ester of alkoxylated isotridecyl alcohol. It is useful as an emulsifier for emulsion polymerization. It can also be used as co-dispersant and stabilizer for water-based coatings and paints. | |
| PEL-QUAT CS280 | Ele Corporation | PEL-QUAT CS280 is a quaternary salt. It is a very concentrated liquid consisting primarily of isostearyl ethylimidazolinium ethosulfate. PEL-QUAT CS280 is compatible with waterborne coating systems stabilized by anionic surfacants. PEL-QUAT CS280 is a mu...voir plus PEL-QUAT CS280 is a quaternary salt. It is a very concentrated liquid consisting primarily of isostearyl ethylimidazolinium ethosulfate. PEL-QUAT CS280 is compatible with waterborne coating systems stabilized by anionic surfacants. PEL-QUAT CS280 is a multi-functional additive. It can be used as an effective anti-static agent, wetting agent for coatings and adhesives, and as a quat emulsifier for drilling fluid. voir moins | |
| PEL-SIL CD710 | Ele Corporation | PEL-SIL CD710 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and ethylene oxide (EO) and propylene oxide (PO)polyether side chains. PEL-SIL CD710 minimizes foam stability and is an excellent defoamer for waterbo...voir plus PEL-SIL CD710 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and ethylene oxide (EO) and propylene oxide (PO)polyether side chains. PEL-SIL CD710 minimizes foam stability and is an excellent defoamer for waterborne and solvent-based coatings and inks, and textile fibre processing applications. PEL-SIL CD710 is also recommended for use as a wetting agent, dispersant, and secondary emulsifier. voir moins | |
| PEL-SIL CL290 | Ele Corporation | PEL-SIL CL290 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL CE 390 has recoatability and low tendency to foam. It is good compatibility with ma...voir plus PEL-SIL CL290 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL CE 390 has recoatability and low tendency to foam. It is good compatibility with many resin systems. PEL-SIL CL290 is an excellent silicone-based additive for improving slip and mar esistance and reducing friction coefficient for solvent-borne, water-borne, and UV/EB cured coating systems. It can be used for coatings in industrial and auto, wood, and overprint vanishes and inks. voir moins | |
| PEL-SIL CL310 | Ele Corporation | PEL-SIL CL310 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and polypropylene oxide (PO) side chains. PEL-SIL CL310 minimizes foam stability and is an excellent defoamer for waterborne industrial or decorative ...voir plus PEL-SIL CL310 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and polypropylene oxide (PO) side chains. PEL-SIL CL310 minimizes foam stability and is an excellent defoamer for waterborne industrial or decorative coatings. PEL-SIL CL310 is compatible with solvent-borne coatings and inks. It provides good low and leveling performance, mar resistance, antiblocking and releasing properties. voir moins | |
| PEL-SIL CL320 | Ele Corporation | PEL-SIL CL320 is a low HLB silicone surfactant and a leveling & gloss agent. It is used as an additive for polyurethane coating resin systems. PEL-SIL CL320 will react into PU coatings to give silicone properties to the surface because it is hydrxyl funct...voir plus PEL-SIL CL320 is a low HLB silicone surfactant and a leveling & gloss agent. It is used as an additive for polyurethane coating resin systems. PEL-SIL CL320 will react into PU coatings to give silicone properties to the surface because it is hydrxyl functional. It is useful for imparting silicone characteristics itno synthetic leather top coat formulations. voir moins | |
| PEL-SIL CL330 | Ele Corporation | PEL-SIL CL330 is a silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) side chains. It is stable in neutral or mildly acid or alkaline aqueous solutions. It is recommended for use as a leveling and wetting agent in water-...voir plus PEL-SIL CL330 is a silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) side chains. It is stable in neutral or mildly acid or alkaline aqueous solutions. It is recommended for use as a leveling and wetting agent in water-borne paints and coatings in automotive, transportation, construction and aerospace industries. It can also be used in solvent-based and high solid/UV curable coatings as leveling agent. For polyurethane foam coatings, PEL-SIL CL330 acts a surfactant and foam cell stabilizer. It is not compatible on the isocyanate side and must be added with the polyol. It exhibits excellent compatibility with most polyol premixes. voir moins | |
| PEL-SIL CL340 | Ele Corporation | PEL-SIL CL340 is a nonreactive, acetate capped, silicone glycol copolymer surfactant supplied at 100 percent active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. Additionally, it prov...voir plus PEL-SIL CL340 is a nonreactive, acetate capped, silicone glycol copolymer surfactant supplied at 100 percent active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. Additionally, it provides mar resistance for coatings applications such as glossy printed materials. voir moins | |
| PEL-SIL CL350 | Ele Corporation | PEL-SIL CL350 is a polysiloxane with EO/PO polyether side chains. It can be used as a low foaming flow and leveling agent and wetting agent in waterborne and solventborne coatings and inks. PEL-SIL CL350 is also reactive in 2K polyurethane systems as a r...voir plus PEL-SIL CL350 is a polysiloxane with EO/PO polyether side chains. It can be used as a low foaming flow and leveling agent and wetting agent in waterborne and solventborne coatings and inks. PEL-SIL CL350 is also reactive in 2K polyurethane systems as a resin and surface modifier. Other uses for PEL-SIL CL350 include surface tension reduction in silicone emulsions and improvement of drainage in pulp brownstock washing. voir moins | |
| PEL-SIL CL360 | Ele Corporation | PEL-SIL CL360 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. It has pendant molecular structure. PEL-SIL CL360 is an excellent flow and leveling agent f...voir plus PEL-SIL CL360 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. It has pendant molecular structure. PEL-SIL CL360 is an excellent flow and leveling agent for solvent-based coatings and inks. It can also be used as a defoamer or anti-foaming agent for waterborne coatings systems. In polyurethane foam coatings, PEL-SIL CL360 acts as a surfactant and foam cell stabilizer. It is not compatible on the isocyanate side and must be added with the polyol. voir moins | |
| PEL-SIL CL370 | Ele Corporation | PEL-SIL CL370 is an amino-functional siloxane with pedant propyldiamine groups. The specialty amino polysiloxane can be used in coatings and adhesives for improving adhesion to various substrates. PEL-SIL CL370 is a reactive amine-containing siloxane addi...voir plus PEL-SIL CL370 is an amino-functional siloxane with pedant propyldiamine groups. The specialty amino polysiloxane can be used in coatings and adhesives for improving adhesion to various substrates. PEL-SIL CL370 is a reactive amine-containing siloxane additive as resin modifier for epoxy resin and polyurethane systems to impart flexibility and strength. voir moins | |
| PEL-SIL CL380 | Ele Corporation | PEL-SIL CL380 is a linear, 100% active, PEG-10 siloxane polyether. It is an excellent flow and leveling agent for both waterborne and solventborne coatings. It also provides slip and mar resistance as well as anti-blocking properties. For UV/EB cure coati...voir plus PEL-SIL CL380 is a linear, 100% active, PEG-10 siloxane polyether. It is an excellent flow and leveling agent for both waterborne and solventborne coatings. It also provides slip and mar resistance as well as anti-blocking properties. For UV/EB cure coatings, PEL-SIL CL380 can reduce coefficient of friction reduction without generating foams or lowering gloss. It may also be incorporated into polymer systems by virtue of its two primary hydroxyl in polyurethane systems. voir moins | |
| PEL-SIL CL390 | Ele Corporation | PEL-SIL CL390 is a specialty quaternary organosilicone. The dialkyl quats polysiloxane is substantive to fibers. It provides anti-stat, lubricity and softness in textile coating applications. It is non-yellowing and water repellent. PEL-SIL can be used ...voir plus PEL-SIL CL390 is a specialty quaternary organosilicone. The dialkyl quats polysiloxane is substantive to fibers. It provides anti-stat, lubricity and softness in textile coating applications. It is non-yellowing and water repellent. PEL-SIL can be used as additive to impart antimicrobial activity for polysiloxane coatings in medical device and marine coatings. voir moins | |
| PEL-SIL CL400 | Ele Corporation | PEL-SIL CL400 is a linear, 100% active, PEG-10 siloxane polyether. It is a slip control agent for both waterborne, solventborne UV/EB coatings and inks. It is also a flow and leveling agent and defoamer that can be incorporated into polymer systems throug...voir plus PEL-SIL CL400 is a linear, 100% active, PEG-10 siloxane polyether. It is a slip control agent for both waterborne, solventborne UV/EB coatings and inks. It is also a flow and leveling agent and defoamer that can be incorporated into polymer systems through its two primary hydroxyls in polyurethane systems. voir moins | |
| PEL-SIL CW300 | Ele Corporation | PEL-SIL CW300 is a low molecular weight, nonionic silicone-based wetting additive that can reduce the surface tension of aqueous solutions significantly lower than conventional nonionic surfactants can. It is stable at neutral pH and compatible with other...voir plus PEL-SIL CW300 is a low molecular weight, nonionic silicone-based wetting additive that can reduce the surface tension of aqueous solutions significantly lower than conventional nonionic surfactants can. It is stable at neutral pH and compatible with other anionic sirfactants and nonionic surfactants. voir moins | |
| PEL-SIL™ CX740 | Ele Corporation | PEL-SIL™ CX740 is an epoxy functionalized siloxane polyether. With its silicone and organic combination and dual reactive hydroxy and epoxy functionality, PEL-SIL™ CX740 offers unique capability to modify epoxy and polyurethane systems. It can impart surf...voir plus PEL-SIL™ CX740 is an epoxy functionalized siloxane polyether. With its silicone and organic combination and dual reactive hydroxy and epoxy functionality, PEL-SIL™ CX740 offers unique capability to modify epoxy and polyurethane systems. It can impart surface and bulk properties, such as gloss, slip, hydrophobicity, and mechanical. Due to its low viscosity, PEL-SIL™ CX740 enhances the process for better mixing and flow for compounds and composites. voir moins | |
| PEL-STAT CS410 | Ele Corporation | PEL-STAT CS410 is a very effective internal antistatic agent. It is ideal for use in anti-static coatings for floors, walls, and anywhere anti-static properties are required. | |
| 2K PU Heavy Duty Protective Coating (Formulation #Inz 2/LV Clear - 001) | Incorez Ltd. | This formulation is for an automotive refinish clearcoat using the Incozol product line. | |
| 2K Waterborne Floor Paint - Glossy Grey (Formulation #142-013) | Incorez Ltd. | This formulation is a grey gloss floor paint that utilizes the product Amirez 142. | |
| 2K Waterborne Floor Paint - Matt Grey (Formulation #142 - 024) | Incorez Ltd. | This formulation is a grey matt floor paint that utilizes Amirez 142. | |
| 2K Waterborne Floor Paint - Semi-Glossy Red (Formulation #148/024 - 025) | Incorez Ltd. | This formulation is for a red gloss floor paint that utilizes the product Amirez 148/024. | |
| 2K Waterborne Primer - Clear (Formulation #148/010 - 016) | Incorez Ltd. | This formulation is a clear concrete primer for two pack waterborne epoxy systems. It features excellent adhesion, high gloss, a long pot life, and utilizes the product Amirez 148/010. | |
| 2K Waterborne Primer - Clear (Formulation #148/024 - 017) | Incorez Ltd. | This formulation is a clear concrete primer for two pack waterborne epoxy systems. It features excellent adhesion, high gloss, good hardness, faster drying and utilizes the product Amirez 148/024. | |
| 2K Waterborne Sealer - Clear (Formulation #142 - 019) | Incorez Ltd. | This formulation is a clear concrete sealer for waterborne epoxy systems. It features high gloss, excellent hardness, good chemical and water resistance that utilizes the product Amirez 142. | |
| 2K Waterborne Sealer - Clear (Formulation #148/024 - 018) | Incorez Ltd. | This formulation is a clear concrete sealer that features a high gloss, good hardness, excellent chemical and water resistance that utilizes Amirez 148/024. | |
| Self-Levelling Floor Coating | Incorez Ltd. | This formulation can be applied over damp and/or green concrete with minimal shrinkage and fast hardness and strength development. | |
| White Gloss using Incorez 142 & Incorez 148/024 | Incorez Ltd. | This formulation is a white gloss wall paint that utilizes the products Incorez 142 & Incorez 148/024. |
