| Aldirez BH | Incorez Ltd. | Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where ...voir plus Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where it is used to prevent gassing in sealant and adhesive applications. voir moins | |
| Amirez 142 | Incorez Ltd. | Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitabl...voir plus Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitable for floor nd wall applications. It has rapid hardness development as well as good anti-corrosion and chemical resistance. It has improved flexibility, excellent aqueous dilution stability, and a fast cure with visible end of pot life. voir moins | |
| Amirez 148/010 | Incorez Ltd. | Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosi...voir plus Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosity, zero VOC, and good freeze/thaw stability. It is completely compatible with cement and calcium salt and is particularly well suited for high temperature climates. Incorez 148/010 is used fro floor and wall paints, hygiene coatings, concrete primers, and gloss paints. voir moins | |
| Amirez 148/024 | Incorez Ltd. | Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and...voir plus Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and good freeze/thaw stability. It has fast cure and excellent gloss retention and chemical resistance. Incorez 148/024 is used for floor and wall paints, anti-graffiti coatings, concrete primers, and gloss paints. voir moins | |
| Amirez 148/055 | Incorez Ltd. | Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure devel...voir plus Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure development. voir moins | |
| BDT-1006 | Bomar, formerly Dymax Oligomers & Coatings | BDT-1006 is a dendritic acrylate with an average functionality of 6. The hyper-branched structure of BDT-1006 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where with...voir plus BDT-1006 is a dendritic acrylate with an average functionality of 6. The hyper-branched structure of BDT-1006 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where withstanding exposure to the harshest conditions is paramount. Great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesn’t decompose until 377°C. voir moins | |
| BDT-1015 | Bomar, formerly Dymax Oligomers & Coatings | BDT-1015 is a dendritic acrylate with an average functionality of 15. The hyper-branched structure of BDT-1015 imparts a unique combination of low diluted viscosity with unmatched chemical and thermal resistance. This is ideal in applications where withst...voir plus BDT-1015 is a dendritic acrylate with an average functionality of 15. The hyper-branched structure of BDT-1015 imparts a unique combination of low diluted viscosity with unmatched chemical and thermal resistance. This is ideal in applications where withstanding exposure to the hardest of conditions is paramount. BDT-1015 is also great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesn’t decompose until 372°C voir moins | |
| BDT-4330 | Bomar, formerly Dymax Oligomers & Coatings | BDT-4330 is a dendritic acrylate with an average functionality of 30. The hyper-branched structure of BDT-4330 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where wit...voir plus BDT-4330 is a dendritic acrylate with an average functionality of 30. The hyper-branched structure of BDT-4330 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where withstanding exposure to the harshest conditions is paramount. Great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesn’t decompose until 397° voir moins | |
| Bisomer® Amine D700 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® Amine D700 (77% aqueous dimethylaminohydroxy-propane solution) is a multifunctional amino alcohol additive for aqueous polymer systems. It forms an aqueous azeotrope that minimizes dry time and maximizes amine elimination. The surfactant effect o...voir plus Bisomer® Amine D700 (77% aqueous dimethylaminohydroxy-propane solution) is a multifunctional amino alcohol additive for aqueous polymer systems. It forms an aqueous azeotrope that minimizes dry time and maximizes amine elimination. The surfactant effect of Bisomer® Amine D700 provides enhanced pigment dispersion, wetting and flow with additional benefits for water-based system formulators. This product has a water content of 22-24%, an active matter of 74-77.5%, a colour number of 200 Pt/Co max., and a molecular weight of 103g/mol. voir moins | |
| Bisomer® BDDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (M...voir plus Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (MEHQ) content of 300-500ppm, a colour number of 100 Pt/Co max., a total polymerisable monomers amount of 99.0% min., and a molecular weight (av) of 226g/mol. Bisomer® BDDMA is an excellent reactive diluent in UV curable wood coatings due to its low viscosity. It is ideal in peroxide cured applications such as a co-agent for PP, PE, nitrile, EPDM rubbers and PVC. It offers excellent properties with PMMA, especially in acrylic flooring and synthetic marble. Bisomer® BDDMA is used in photopolymers, wire and cable coatings, adhesives and sealants. It also offers excellent compatibility with unsaturated polyesters for gel-coats, chemical fixings and anchor bolts. voir moins | |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...voir plus Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. voir moins | |
| Bisomer® C13MA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) ...voir plus Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) of > 99.0%, a molecular weight (av) of 268g/mol, and an inhibitor (MEHQ) content of 75-125ppm. It is extremely hydrophobic and offers a low Glass Transition Temperature (Tg), hence it is an excellent flexibilising co-monomer in adhesive and sealant applications. Bisomer® C13MA is a particularly useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants and high solids acrylic polyols for automotive coatings and industrial coatings. It offers a low viscosity and low odour combined with low shrinkage on polymerisation. voir moins | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resi...voir plus Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent in 2K adhesives and coatings. voir moins | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...voir plus Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. voir moins | |
| Bisomer® DALP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This pro...voir plus Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This product has an ester of 99% min., an iodine number of 196gl^2/100g min., and a density @ 20°C of 1.115 to 1.121kg/l. It may also be copolymerised with a variety of common monomers, or used as a “reactive diluent”. When used as a partial replacement for styrene in cross-linking polyesters, Bisomer® DALP produces materials showing up to 25% less shrinkage on cure. Bisomer® DALP may also be employed in self-priming PVC organosols for steel coating or incorporated into EPDM rubber to improve the adhesive strength. voir moins | |
| Bisomer® DEGDMA HI | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters...voir plus Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a refractive index @ 20°C of 1.455-1.460, a residual solvent amount of 0.8% max., and an inhibitor (MEHQ) content of 650-850ppm. It is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® DEGDMA HI is also excellent for use in the manufacture of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® DEGDMA HI offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins | |
| Bisomer® EP 100 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This ...voir plus Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 90-110mg KOH/g, an inhibitor (MEHQ) content of 90-120ppm, and a molecular weight (av) of 1114g/mol. Bisomer® EP100 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP100 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. voir moins | |
| Bisomer® EP 150 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, bo...voir plus Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, both ends of the chain are capped with 2 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 140-160mg KOH/g, an inhibitor (MEHQ) content of 70-100ppm, and a molecular weight (av) of 736g/mol. Bisomer® EP150 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP150 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. voir moins | |
| Bisomer® HEMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an...voir plus Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an inhibitor (MEHQ) content of 200-240ppm, and an acid number of < 1.0mg KOH/g. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. It may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HEMA is also the major raw material for the production of long-term wear and disposable contact lenses and in turn is an ideal starting point in formulating biomedical hydrogels. voir moins | |
| Bisomer® HEMA HP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...voir plus Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. voir moins | |
| Bisomer® HPMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. Thi...voir plus Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. This product has a molecular weight (av) 144g/mol, a diester (PGDMA) of 0.2% max., and a colour number of 10 Pt/Co max. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. Bisomer® HPMA may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HPMA is particularly useful as a hydrophobic hydroxy monomer in the production of vacuum impregnation sealants for cast aluminium components. It is also extensively used in the production of flexible, UV curable photopolymer printing plates. voir moins | |
| Bisomer® IDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. Th...voir plus Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. This product acidity (methacrylic acid) of 0.01% max., an inhibitor (MEHQ) content of 75-125ppm, and an assay (GC) of 97.0% min. Bisomer® IDMA is a useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants, high solids acrylic polyols for automotive coatings and industrial coatings. It offers low viscosity and low odour combined with low shrinkage on polymerisation. It is non-toxic, non-irritating and is not a suspected sensitiser. voir moins | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active ...voir plus Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active monomer of 97.0%. Bisomer® LMA is based on a natural form of lauryl alcohol; as C12 lauryl methacrylate the content is around 65-70 %. Bisomer® LMA is mostly used in the automotive industry for viscosity modification of lubricating oils. However, due to its hydrophobic nature and flexibilising properties, Bisomer® LMA is also extensively used in anaerobic adhesives, vacuum impregnation of aluminium castings, sealants and pressure sensitive adhesives (PSAs). voir moins | |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced ...voir plus Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced variation in properties such as viscosity, pigment wetting, chemical resistance, adhesion, hardness, sheer strength and tack. This product is a key raw material for the synthesis of high quality acrylic resins for a wide range of applications, including industrial coatings, printing inks and pressure sensitive adhesive applications. voir moins | |
| Bisomer® MPEG 350 MA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponific...voir plus Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponification value of 127-140mg KOH/g, an inhibitor (MEHQ) content of 0.45-0.55%, and a water content of 0.5% max. Bisomer® MPEG 350 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 350 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). voir moins | |
| Bisomer® MPEG 550 MA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecula...voir plus Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecular weight (av) of 628g/mol. Bisomer® MPEG 550 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 550 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). Bisomer® MPEG 550 MA is non-toxic and a liquid at ambient temperature. voir moins | |
| Bisomer® PEG 200 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsa...voir plus Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsaturated polyesters and especially acrylic polymers such as acrylic sheet and acrylic flooring. This product has an inhibitor (MEHQ) content of 300-500 ppm, an active monomer of 99.0%, and a molecular weight (ac) of 338g/mol. Bisomer® PEG 200 DMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and a non-irritant. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® PEG 200 DMA is also excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings and is also an essential component in many anaerobic adhesives and sealants. Bisomer® PEG 200 DMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins | |
| Bisomer® PEM6 LD | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties wh...voir plus Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers. This product has a hydroxul value of 145-165mg KOH/g, a molecular weigh (av) of 350g/mol, and an inhibitor (MEHQ) content of 500-800ppm. Bisomer® PEM6 LD is ideal in the preparation of hydrogels, wood impregnants, soil stabilisers and polyurethane dispersions (PUDs). It is also used extensively in the manufacture of more traditional acrylic polyols and urethane methacrylate oligomers for use in photo imaging applications such as printed circuit boards (PCBs) and dry film resists (DFRs). voir moins | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...voir plus Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. voir moins | |
| Bisomer® PPM5 LI | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g...voir plus Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g, a molecular weight (av) of 376g/mol, and an inhibitor (MEHQ) content of 300-500ppm. Bisomer PPM5 LI shows excellent properties in acrylic polyols for automotive OEM and refinish applications, especially flexibility and weathering properties. It is hydrophobic and offers a low Glass Transition Temperature (Tg) and low shrinkage on polymerisation. It is an excellent component in anaerobic adhesives, vacuum impregnation of aluminium castings and general sealants. This product is also a useful co-monomer in the production of vinyl, acrylic and styrene acrylic decorative paints. voir moins | |
| Bisomer® PTE | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular wei...voir plus Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular weight (av) of 217g/mol. Bisomer® PTE is an aromatic tertiary amine used as an amine activator for organic peroxide initiation, ideal for use in formulations using dibenzoyl peroxide (BPO). It has reduced toxicity. Bisomer® PTE is extensively used to activate MMA based acrylic resins, styrene-based unsaturated polyesters and vinyl ester methacrylate formulations. It is ideal in a wide range of applications, including acrylic flooring, adhesives, chemical fixings, road-marking paints, anchor bolts and chemical mortars. voir moins | |
| Bisomer® TEGDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of ...voir plus Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a total polymerisable monomers of 99% min., a molecular weight (av) of 286g/mol, and an inhibitor (MEHQ) content of 250-400ppm. Bisomer® TEGDMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and non-irritating. It is ideal in dibenzoyl peroxide (BPO) cured applications and excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® TEGDMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins | |
| BR-1041MB | Bomar, formerly Dymax Oligomers & Coatings | BR-1041MB is a biobased polyether urethane methacrylate oligomer with a substantial amount of bio based content and is tin-free. This is a harder version of BR-1043MB. This oligomer has a good balance of toughness and flexibility. It has the ability to ad...voir plus BR-1041MB is a biobased polyether urethane methacrylate oligomer with a substantial amount of bio based content and is tin-free. This is a harder version of BR-1043MB. This oligomer has a good balance of toughness and flexibility. It has the ability to adhere to a variety of plastic substrates. The biobased backbone, methacrylate functionality, and tin-free nature make this an excellent choice for consumer applications with low irritancy. voir moins | |
| BR-1043MB | Bomar, formerly Dymax Oligomers & Coatings | BR-1043MB is a biobased polyether urethane methacrylate oligomer with a majority percentage of biobased content. This oligomer provides excellent low-temperature flexibility, elasticity, and excellent dynamic properties and rebound with a lower viscosity ...voir plus BR-1043MB is a biobased polyether urethane methacrylate oligomer with a majority percentage of biobased content. This oligomer provides excellent low-temperature flexibility, elasticity, and excellent dynamic properties and rebound with a lower viscosity versus similar polyether chemistries. The oligomer exhibits a higher degree of heat resistance vs other polyether oligomers. The high biobased backbone and methacrylate functionality make this an excellent candidate for consumer applications with low irritancy requirements. voir moins | |
| BR-116 | Bomar, formerly Dymax Oligomers & Coatings | BR-116 oligomer, a trifunctional aromatic polyether urethane methacrylate, is used in the manufacture of soft coatings and adhesives which are made to adhere to metals and glass. BR-116 offers superior bond strength and excellent reduction capabilities in...voir plus BR-116 oligomer, a trifunctional aromatic polyether urethane methacrylate, is used in the manufacture of soft coatings and adhesives which are made to adhere to metals and glass. BR-116 offers superior bond strength and excellent reduction capabilities in common monomers. voir moins | |
| BR-144B | Bomar, formerly Dymax Oligomers & Coatings | BR-144B, a medium molecular weight, trifunctional, aliphatic polyether urethane acrylate oligomer, offers the formulator a cost-effective means of obtaining high abrasion resistance and solvent resistance in a durable, high-gloss coating. While not limite...voir plus BR-144B, a medium molecular weight, trifunctional, aliphatic polyether urethane acrylate oligomer, offers the formulator a cost-effective means of obtaining high abrasion resistance and solvent resistance in a durable, high-gloss coating. While not limited to these fields, BR-144B is an effective choice in wood and furniture applications, along with abrasion-resistant overprint varnishes. This material has low skin sensitivity for dental and cosmetic applications. voir moins | |
| BR-144H15 | Bomar, formerly Dymax Oligomers & Coatings | BR-144H15 is a trifunctional polyether urethane acrylate with excellent weather ability properties, fast cure speeds, and abrasion and solvent resistance. BR-144H15 is suitable for abrasion-resistant wood coatings, hydrolytically stable inks, and coatings...voir plus BR-144H15 is a trifunctional polyether urethane acrylate with excellent weather ability properties, fast cure speeds, and abrasion and solvent resistance. BR-144H15 is suitable for abrasion-resistant wood coatings, hydrolytically stable inks, and coatings requiring additional cure speed with multifunctional oligomers. voir moins | |
| BR-202 | Bomar, formerly Dymax Oligomers & Coatings | BR-202, an aromatic polyether urethane dimethacrylate, finds use in a diverse number of UV coating applications. BR-202 is valued for its strong bond strength, its affinity for glass, steel, and a variety of plastic substrates, and for its excellent elong...voir plus BR-202, an aromatic polyether urethane dimethacrylate, finds use in a diverse number of UV coating applications. BR-202 is valued for its strong bond strength, its affinity for glass, steel, and a variety of plastic substrates, and for its excellent elongation. BR-202 is also of value for its low initial color (despite its aromatic nature). voir moins | |
| BR-204 | Bomar, formerly Dymax Oligomers & Coatings | BR-204, an aromatic polyether urethane dimethacrylate, finds use in a diverse number of UV adhesives applications. BR-204 is valued for its strong bond strength, its affinity for glass, steel, and a variety of plastic substrates, and for its excellent elo...voir plus BR-204, an aromatic polyether urethane dimethacrylate, finds use in a diverse number of UV adhesives applications. BR-204 is valued for its strong bond strength, its affinity for glass, steel, and a variety of plastic substrates, and for its excellent elongation. BR-204 is also of value for its low initial viscosity and low color (despite its aromatic nature). voir moins | |
| BR-302 | Bomar, formerly Dymax Oligomers & Coatings | BR-302 is a linear aromatic urethane diacrylate, typically used in coatings and adhesives applications where yellowing constraints are not present. The backbone and aromatic content of BR-302 offer excellent chemical resistance and toughness, combined in ...voir plus BR-302 is a linear aromatic urethane diacrylate, typically used in coatings and adhesives applications where yellowing constraints are not present. The backbone and aromatic content of BR-302 offer excellent chemical resistance and toughness, combined in an affordable oligomer. voir moins | |
| BR-3042 | Bomar, formerly Dymax Oligomers & Coatings | BR-3042 is an aromatic polyether urethane diacrylate designed for UV adhesive applications. Cured films of BR-3042 and monofunctional monomers result in soft, highly elastic, tacky systems ideal for use in UV pressure-sensitive adhesives (PSA), or UV-cura...voir plus BR-3042 is an aromatic polyether urethane diacrylate designed for UV adhesive applications. Cured films of BR-3042 and monofunctional monomers result in soft, highly elastic, tacky systems ideal for use in UV pressure-sensitive adhesives (PSA), or UV-curable laminating adhesives. BR-3042 enhances adhesion and improves solvent resistance. voir moins | |
| BR-344 | Bomar, formerly Dymax Oligomers & Coatings | BR-344, a high molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a cost-effective choice for coatings formulations that require weathering durability and non-yellowing characteristics. Formulations with BR-344 result in fl...voir plus BR-344, a high molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a cost-effective choice for coatings formulations that require weathering durability and non-yellowing characteristics. Formulations with BR-344 result in flexible yet durable, abrasion-resistant, non-yellowing systems of moderate- to low-viscosity. voir moins | |
| BR-345 | Bomar, formerly Dymax Oligomers & Coatings | BR-345 is a difunctional polyether urethane acrylate that provides unique properties for 3D printing resins. This soft material is ideal for use in applications where high elongation is desired and can be used as an additive for impact resistance. Resins ...voir plus BR-345 is a difunctional polyether urethane acrylate that provides unique properties for 3D printing resins. This soft material is ideal for use in applications where high elongation is desired and can be used as an additive for impact resistance. Resins with less than 1000 cps can be formulated with this material when monomer levels are above 50%. voir moins | |
| BR-371B | Bomar, formerly Dymax Oligomers & Coatings | BR-371B, a low molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a great fit for coatings that require high tensile strength, superior hardness, scratch resistance, and weathering resistance. Formulations with BR-371B yiel...voir plus BR-371B, a low molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a great fit for coatings that require high tensile strength, superior hardness, scratch resistance, and weathering resistance. Formulations with BR-371B yield hard, clear, low-yellowing films. This is a reduced MEHQ version of BR-371S. voir moins | |
| BR-371MS | Bomar, formerly Dymax Oligomers & Coatings | BR-371MS, a low molecular weight, difunctional, aliphatic polyether urethane methacrylate oligomer, is a great fit for coatings that require high tensile strength, extremely low color, superior hardness, scratch resistance, and weathering resistance. BR-3...voir plus BR-371MS, a low molecular weight, difunctional, aliphatic polyether urethane methacrylate oligomer, is a great fit for coatings that require high tensile strength, extremely low color, superior hardness, scratch resistance, and weathering resistance. BR-371MS provides very low color and high viscosity, is ideal for hard gel nail coatings, and offers reduced heat generation vs other high tensile strength materials. voir moins | |
| BR-372 | Bomar, formerly Dymax Oligomers & Coatings | BR-372, a medium molecular weight, difunctional aliphatic polyether urethane acrylate oligomer, is a material offering a balance of toughness and flexibility with very low color. Formulations with BR-372 yield high clarity films with adhesion to a variety...voir plus BR-372, a medium molecular weight, difunctional aliphatic polyether urethane acrylate oligomer, is a material offering a balance of toughness and flexibility with very low color. Formulations with BR-372 yield high clarity films with adhesion to a variety of plastics, and can also be used in the manufacture of UV-curable fiberglass matrix resins. This material has low skin sensitivity for dental and cosmetic applications. voir moins | |
| BR-374 | Bomar, formerly Dymax Oligomers & Coatings | BR-374, a medium molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a material offering a balance of toughness and flexibility, with very low color. Formulations with BR-374 yield high clarity films or tie layers with adhes...voir plus BR-374, a medium molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a material offering a balance of toughness and flexibility, with very low color. Formulations with BR-374 yield high clarity films or tie layers with adhesion to a variety of substrates, making it ideal for laminating applications. voir moins | |
| BR-3741AJ | Bomar, formerly Dymax Oligomers & Coatings | BR-3741AJ is an aliphatic 1.3 acrylate functional polyether urethane. The extremely elongating nature of BR-3741AJ makes it an excellent candidate for consideration in UV light-curable PSAs as a reactive tackifier. It is also used as a co-oligomer for adh...voir plus BR-3741AJ is an aliphatic 1.3 acrylate functional polyether urethane. The extremely elongating nature of BR-3741AJ makes it an excellent candidate for consideration in UV light-curable PSAs as a reactive tackifier. It is also used as a co-oligomer for adhesion promotion in coatings. Films formulated with BR-3741AJ are highly flexible, elastomeric, and tacky. This oligomer is an excellent adhesion promoter, and compared to other reactive tackifiers it results in relatively tougher films. It is a perfect choice for optically clear UV pressure-sensitive adhesives (PSAs). voir moins | |
| BR-3747AE | Bomar, formerly Dymax Oligomers & Coatings | BR-3747AE is a difunctional, flexible, aliphatic polyether urethane acrylate. In addition to our typical substrates, BR-3747AE provides adhesion to variety of unusual substrates: polypropylene, high-density polyethylene (HDPE), and poly(vinyl chloride) (P...voir plus BR-3747AE is a difunctional, flexible, aliphatic polyether urethane acrylate. In addition to our typical substrates, BR-3747AE provides adhesion to variety of unusual substrates: polypropylene, high-density polyethylene (HDPE), and poly(vinyl chloride) (PVC). This unique product adheres well to a variety of metals, glass, and plastics. It is also an excellent candidate for consideration in UV light-curable PSA as a co-oligomer. voir moins | |
| BR-441BI20 | Bomar, formerly Dymax Oligomers & Coatings | BR-441BI20 is a fast-curing, high tensile strength, low molecular weight aliphatic polyester urethane acrylate with low color, high hardness, and excellent adhesion to plastic substrates. BR-441BI20 can be considered for use in high tensile strength overp...voir plus BR-441BI20 is a fast-curing, high tensile strength, low molecular weight aliphatic polyester urethane acrylate with low color, high hardness, and excellent adhesion to plastic substrates. BR-441BI20 can be considered for use in high tensile strength overprint varnishes, high tensile strength 3D printing resins, and low-yellowing coating. voir moins | |
| BR-5413MB | Bomar, formerly Dymax Oligomers & Coatings | BR-5413MB is a difunctional aliphatic polyether urethane methacrylate with a good balance of high tensile strength and impact resistance. Formulating with linear monofunctional monomers can yield improved flexibility. This oligomer is an excellent candida...voir plus BR-5413MB is a difunctional aliphatic polyether urethane methacrylate with a good balance of high tensile strength and impact resistance. Formulating with linear monofunctional monomers can yield improved flexibility. This oligomer is an excellent candidate to consider for use in impact-resistant coatings and provides low color and excellent non-yellowing performance. voir moins | |
| BR-541MB | Bomar, formerly Dymax Oligomers & Coatings | BR-541MB is a difunctional aliphatic polyether urethane methacrylate. BR-541MB is used for its desirable balance of toughness and flexibility and its ability to adhere to a variety of substrates. This oligomer is an excellent candidate to consider for use...voir plus BR-541MB is a difunctional aliphatic polyether urethane methacrylate. BR-541MB is used for its desirable balance of toughness and flexibility and its ability to adhere to a variety of substrates. This oligomer is an excellent candidate to consider for use in impact-resistant coatings on various substrates when used with BR-543MB. This material has low skin sensitivity and is INCI registered for compliance in cosmetic applications. voir moins | |
| BR-541S | Bomar, formerly Dymax Oligomers & Coatings | BR-541S a difunctional, polyether urethane acrylate that is used for its desirable balance of toughness and flexibility. It adheres readily to a variety of substrates including cold rolled steel, glass, PC, and stainless steel. It is an excellent choice f...voir plus BR-541S a difunctional, polyether urethane acrylate that is used for its desirable balance of toughness and flexibility. It adheres readily to a variety of substrates including cold rolled steel, glass, PC, and stainless steel. It is an excellent choice for impact-resistant coatings. BR-541S is desirable for use in cosmetic applications where color stability and optically clear tough coatings are needed. voir moins | |
| BR-543 | Bomar, formerly Dymax Oligomers & Coatings | BR-543 is a difunctional, aliphatic, polyether urethane acrylate. Films formulated with BR-543 exhibit superior physical and weathering capabilities. BR-543 may also be used to improve the flexibility, weathering, and adhesion characteristics of existing ...voir plus BR-543 is a difunctional, aliphatic, polyether urethane acrylate. Films formulated with BR-543 exhibit superior physical and weathering capabilities. BR-543 may also be used to improve the flexibility, weathering, and adhesion characteristics of existing film and foil coatings. voir moins | |
| BR-543MB | Bomar, formerly Dymax Oligomers & Coatings | BR-543MB is a difunctional aliphatic polyether urethane methacrylate. BR-543MB is an excellent candidate to consider for use in cosmetic applications. As a primary oligomer, BR-543MB offers excellent properties of adhesion and optical clarity. As a co-oli...voir plus BR-543MB is a difunctional aliphatic polyether urethane methacrylate. BR-543MB is an excellent candidate to consider for use in cosmetic applications. As a primary oligomer, BR-543MB offers excellent properties of adhesion and optical clarity. As a co-oligomer, BR-543MB can be used to improve an existing formulation’s glass adhesion. This product is listed in the INCI directory to meet cosmetic regulatory guidelines and has low skin sensitivity. voir moins | |
| BR-543TF | Bomar, formerly Dymax Oligomers & Coatings | BR-543TF is a difunctional aliphatic polyether urethane acrylate that is tin-free. Films formulated with BR-543TF exhibit superior physical and weathering capabilities. BR-543TF may also be used to improve the flexibility, weathering, and adhesion charact...voir plus BR-543TF is a difunctional aliphatic polyether urethane acrylate that is tin-free. Films formulated with BR-543TF exhibit superior physical and weathering capabilities. BR-543TF may also be used to improve the flexibility, weathering, and adhesion characteristics of existing film and foil coatings. This product shows a high degree of crystallinity at room temperature. voir moins | |
| BR-551M | Bomar, formerly Dymax Oligomers & Coatings | BR-551M is an oligomer that provides excellent acetone removability when used in gel polish applications. Low heat generation occurs during cure with UV/LED lamps that are typically used in nail gel polish applications. The resultant coating also has high...voir plus BR-551M is an oligomer that provides excellent acetone removability when used in gel polish applications. Low heat generation occurs during cure with UV/LED lamps that are typically used in nail gel polish applications. The resultant coating also has high gloss and low APHA color impact. Furthermore, this oligomer was designed to meet regulatory expectations for salon applications in Europe. voir moins | |
| BR-551ME | Bomar, formerly Dymax Oligomers & Coatings | BR-551ME is an oligomer that provides excellent acetone removability when used in gel polish applications. Low heat generation occurs during cure with UV/LED lamps that are typically used in nail gel polish applications. The resultant coating also has hig...voir plus BR-551ME is an oligomer that provides excellent acetone removability when used in gel polish applications. Low heat generation occurs during cure with UV/LED lamps that are typically used in nail gel polish applications. The resultant coating also has high gloss, and low APHA color impact. Furthermore, this oligomer was designed to meet regulatory expectations for salon applications in Europe. voir moins | |
| BR-5541M | Bomar, formerly Dymax Oligomers & Coatings | BR-5541M is a flexible polyether urethane methacrylate oligomer diluted in 20% IBOA with a low modulus, good adhesion to a variety of substrates, and excellent elasticity. The high molecular weight of the backbone structure offers improved elasticity and ...voir plus BR-5541M is a flexible polyether urethane methacrylate oligomer diluted in 20% IBOA with a low modulus, good adhesion to a variety of substrates, and excellent elasticity. The high molecular weight of the backbone structure offers improved elasticity and rebound versus similar high elongation materials. The low modulus of the material allows for a high degree of flexibility comparable to silicone-based materials such as BRS-14320S, but with improved compatibility and surface cure. The compressibility of the material also offers potential usage in gasket and sealing applications. voir moins | |
| BR-571 | Bomar, formerly Dymax Oligomers & Coatings | BR-571 is an aliphatic polyether urethane diacrylate with exceptionally low color. Based on a stable polyether backbone, BR-571 offers excellent physical properties in formulated films. While relatively high in neat viscosity, BR-571 reduces quickly with ...voir plus BR-571 is an aliphatic polyether urethane diacrylate with exceptionally low color. Based on a stable polyether backbone, BR-571 offers excellent physical properties in formulated films. While relatively high in neat viscosity, BR-571 reduces quickly with the addition of heat or monomer. Formulations using BR-571 often have a unique blend of toughness and flexibility. voir moins | |
| BR-571MB | Bomar, formerly Dymax Oligomers & Coatings | BR-571MB, a difunctional, aliphatic polyether urethane methacrylate, is used for its desirable balance of toughness and flexibility and its ability to adhere to a variety of substrates. It is an excellent choice for impact-resistant coatings. BR-571MB als...voir plus BR-571MB, a difunctional, aliphatic polyether urethane methacrylate, is used for its desirable balance of toughness and flexibility and its ability to adhere to a variety of substrates. It is an excellent choice for impact-resistant coatings. BR-571MB also brings desirable weather resistance and low-yellowing properties to formulations utilizing it. voir moins | |
| BR-581MT | Bomar, formerly Dymax Oligomers & Coatings | BR-581MT is an oligomer blend that provides a low-color, tack-free cure under low-intensity LED cure conditions. BR-581MT provides a balance of hardness and flexibility for abrasion resistance on flexible substrates, while also yielding a high-gloss, non-...voir plus BR-581MT is an oligomer blend that provides a low-color, tack-free cure under low-intensity LED cure conditions. BR-581MT provides a balance of hardness and flexibility for abrasion resistance on flexible substrates, while also yielding a high-gloss, non-yellowing finish. This product is a resin blend containing 25% DEGDMA, is tin-free, is fully INCI listed, and can be formulated into a tack-free top coat for nail gel applications. For further recommendations on formulating nail applications, please see our sell sheet for a starting point formula. voir moins | |
| BR-5825I30 | Bomar, formerly Dymax Oligomers & Coatings | BR-5825I30 was designed to be a lower viscosity equivalent to BR-582. BR-5825I30 offers an excellent combination of toughness and flexibility, with the added advantage of lower formulation viscosity. BR-5825I30 is low in color and provides excellent weath...voir plus BR-5825I30 was designed to be a lower viscosity equivalent to BR-582. BR-5825I30 offers an excellent combination of toughness and flexibility, with the added advantage of lower formulation viscosity. BR-5825I30 is low in color and provides excellent weatherability. voir moins | |
| BR-582E8 | Bomar, formerly Dymax Oligomers & Coatings | BR-582E8 is an aliphatic polyether urethane acrylate that provides a balance of toughness and flexibility. This oligomer is highly recommended for use in single-coat, flexible coatings on metal and plastic substrates. It is an excellent choice for impact ...voir plus BR-582E8 is an aliphatic polyether urethane acrylate that provides a balance of toughness and flexibility. This oligomer is highly recommended for use in single-coat, flexible coatings on metal and plastic substrates. It is an excellent choice for impact and bend-resistant coatings. BR-582E8 also brings desirable weather resistance and low-yellowing properties to formulations utilizing it. voir moins | |
| BR-640D | Bomar, formerly Dymax Oligomers & Coatings | BR-640D is a polybutadiene (PBD) urethane acrylate with a functionality of two. Designed to meet rigorous electronic applications, BR-640D has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring t...voir plus BR-640D is a polybutadiene (PBD) urethane acrylate with a functionality of two. Designed to meet rigorous electronic applications, BR-640D has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-640D withstands the extremes of temperature typical of such tests, without undue degradation of properties. Excellent hydrophobic properties were exhibited where 0.012 and 0.037% water was absorbed by cured coating when submerged in water for 24 hours. In addition to the adhesion properties listed in the table below, BR-640D showed excellent adhesion to ABS, acrylic, nylon-6, PVC, and PS. voir moins | |
| BR-641D | Bomar, formerly Dymax Oligomers & Coatings | BR-641D is a polybutadiene (PBD) urethane acrylate, which was designed to meet rigorous electronic coating applications. This oligomer has exceptional adhesion to various metals, glass, and polycarbonate substrates. BR-641D has many desirable properties t...voir plus BR-641D is a polybutadiene (PBD) urethane acrylate, which was designed to meet rigorous electronic coating applications. This oligomer has exceptional adhesion to various metals, glass, and polycarbonate substrates. BR-641D has many desirable properties that are typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-641D withstands the extremes of temperature typical of such tests, without undue degradation of properties. In addition to the adhesion properties listed in the table below, BR-641D showed excellent adhesion to PMMA, ABS, PVC, Nylon-6, Polystyrene, and Polypropylene. voir moins | |
| BR-641E | Bomar, formerly Dymax Oligomers & Coatings | BR-641E is a polybutadiene urethane acrylate oligomer designed for rigorous electronic coating, flexible ink, and pressure-sensitive adhesive applications. This oligomer is also perfect for extremely low water absorption applications. It is resistant to t...voir plus BR-641E is a polybutadiene urethane acrylate oligomer designed for rigorous electronic coating, flexible ink, and pressure-sensitive adhesive applications. This oligomer is also perfect for extremely low water absorption applications. It is resistant to thermal cycling and can withstand the temperature extremes typical of such tests without undue degradation of properties. voir moins | |
| BR-643 | Bomar, formerly Dymax Oligomers & Coatings | BR-643 is a polybutadiene (PBD) urethane acrylate. Designed to meet rigorous electronic applications, BR-643 has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-...voir plus BR-643 is a polybutadiene (PBD) urethane acrylate. Designed to meet rigorous electronic applications, BR-643 has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-643 withstands the extremes of temperature typical of such tests, without undue degradation of properties. voir moins | |
| BR-741 | Bomar, formerly Dymax Oligomers & Coatings | BR-741 is a low molecular weight, difunctional aliphatic polyester urethane acrylate that can be effectively formulated for adhesion to steel, aluminum, and various plastics with some amount of surface energy. The resulting hard, tough film makes an effec...voir plus BR-741 is a low molecular weight, difunctional aliphatic polyester urethane acrylate that can be effectively formulated for adhesion to steel, aluminum, and various plastics with some amount of surface energy. The resulting hard, tough film makes an effective protective coating, which will be non-yellowing, due to the aliphatic backbone of BR-741. voir moins | |
| BR-741MD1 | Bomar, formerly Dymax Oligomers & Coatings | BR-741MD1 is an aliphatic, difunctional polyester urethane methacrylate offering excellent adhesion and flexibility. While not limited to these applications, BR-741MD1 is an effective choice in optically clear coatings and inks for plastics and metals. Th...voir plus BR-741MD1 is an aliphatic, difunctional polyester urethane methacrylate offering excellent adhesion and flexibility. While not limited to these applications, BR-741MD1 is an effective choice in optically clear coatings and inks for plastics and metals. This oligomer is also perfect for UV & LED nail gel coatings because this material has low skin sensitivity and is INCI listed. voir moins | |
| BR-742M | Bomar, formerly Dymax Oligomers & Coatings | BR-742M is a medium molecular weight, difunctional aliphatic polyester urethane methacrylate offering excellent adhesion, flexibility, and hardness balance. BR-742M offers an excellent balance of gloss, low heat generation, low color, and low MeHQ for nai...voir plus BR-742M is a medium molecular weight, difunctional aliphatic polyester urethane methacrylate offering excellent adhesion, flexibility, and hardness balance. BR-742M offers an excellent balance of gloss, low heat generation, low color, and low MeHQ for nail coating applications. It can also be effectively formulated for adhesion to steel, aluminum, and glass. Due to its low solvent resistance, it can be formulated into solvent strippable temporary coatings. This material has low skin sensitivity for dental and cosmetic applications. voir moins | |
| BR-742MS | Bomar, formerly Dymax Oligomers & Coatings | BR-742MS is a variant of BR-742M with non-detectable (<10 ppm) MeHQ content to comply with regulatory requirements for both salon and retail nail coating applications in Europe. This oligomer has an excellent balance of gloss, low color, removability, dur...voir plus BR-742MS is a variant of BR-742M with non-detectable (<10 ppm) MeHQ content to comply with regulatory requirements for both salon and retail nail coating applications in Europe. This oligomer has an excellent balance of gloss, low color, removability, durability, and low heat generation during the cure process. voir moins | |
| BR-742S | Bomar, formerly Dymax Oligomers & Coatings | BR-742S is a difunctional polyester urethane acrylate oligomer that offers good weather ability. High-impact-strength coatings and inks can be formulated that is non-yellowing and have a high gloss. This material offers low shrinkage, which is excellent f...voir plus BR-742S is a difunctional polyester urethane acrylate oligomer that offers good weather ability. High-impact-strength coatings and inks can be formulated that is non-yellowing and have a high gloss. This material offers low shrinkage, which is excellent for 3D printing applications. Furthermore, BR-742S is registered with INCI for cosmetic applications. voir moins | |
| BR-7432GB | Bomar, formerly Dymax Oligomers & Coatings | BR-7432GB, an aliphatic polyester urethane diacrylate, formulates into applications requiring adhesion to various substrates and applications such as thermoforming resistant coatings where toughness and flexibility are required. BR-7432GB provides an exce...voir plus BR-7432GB, an aliphatic polyester urethane diacrylate, formulates into applications requiring adhesion to various substrates and applications such as thermoforming resistant coatings where toughness and flexibility are required. BR-7432GB provides an excellent balance of weathering, solvent resistance, tensile strength, and adhesion properties. BR-7432GB is an incredibly tough, elastomeric material with similar mechanical performance to cast urethanes, and can provide excellent impact resistance and weatherability to formulations. BR-7432GB also has low MeHQ for nail gel polish applications. voir moins | |
| BR-7432GI30 | Bomar, formerly Dymax Oligomers & Coatings | BR-7432GI30, an aliphatic polyester urethane diacrylate, formulates into applications requiring adhesion to various substrates and applications where excellent toughness and flexibility are required. The BR-7432GI30 backbone performs very well in extended...voir plus BR-7432GI30, an aliphatic polyester urethane diacrylate, formulates into applications requiring adhesion to various substrates and applications where excellent toughness and flexibility are required. The BR-7432GI30 backbone performs very well in extended weatherability studies. It is an excellent choice for impact and bend resistant coatings, and can act as an impact modifier for composite applications. voir moins | |
| BR-744BT | Bomar, formerly Dymax Oligomers & Coatings | BR-744BT is an aliphatic difunctional polyester urethane acrylate offering excellent adhesion, toughness, and flexibility. BR-744BT provides excellent flexibility and high elongation to UV formulations and can provide impact and chip resistance to nail ge...voir plus BR-744BT is an aliphatic difunctional polyester urethane acrylate offering excellent adhesion, toughness, and flexibility. BR-744BT provides excellent flexibility and high elongation to UV formulations and can provide impact and chip resistance to nail gel polishes. This material has low skin sensitivity for dental and cosmetic applications and is INCI listed. voir moins | |
| BR-744SD | Bomar, formerly Dymax Oligomers & Coatings | BR-744SD is a difunctional, aliphatic polyester urethane acrylate offering excellent adhesion, flexibility, and tensile strength. It can be effectively formulated for adhesion to steel, aluminum, and various plastics. Products formulated with BR-744SD can...voir plus BR-744SD is a difunctional, aliphatic polyester urethane acrylate offering excellent adhesion, flexibility, and tensile strength. It can be effectively formulated for adhesion to steel, aluminum, and various plastics. Products formulated with BR-744SD can be highly flexible, elastomeric, and tacky. It is excellent as an adhesion promoter or reactive tackifier and is a perfect choice for optically clear UV-PSAs. voir moins | |
| BR-771F | Bomar, formerly Dymax Oligomers & Coatings | BR-771F is a low molecular weight oligomer with a good balance of high tensile strength and moderate elongation with an excellent cure speed. BR-771F exhibits excellent adhesion to plastic substrates, particularly polycarbonate. Formulations made with BR-...voir plus BR-771F is a low molecular weight oligomer with a good balance of high tensile strength and moderate elongation with an excellent cure speed. BR-771F exhibits excellent adhesion to plastic substrates, particularly polycarbonate. Formulations made with BR-771F can exhibit superior toughness properties with a high Tg. Its inherently low color and aliphatic backbone make BR-771F an excellent candidate for polycarbonate coatings and adhesives. voir moins | |
| BR-930D | Bomar, formerly Dymax Oligomers & Coatings | BR-930D is a trifunctional urethane acrylate oligomer that offers high heat distortion temperatures. This product also offers high abrasion resistance, solvent resistance, and durability. BR-930D is perfect for 3D printing applications using SLA, 3D inkje...voir plus BR-930D is a trifunctional urethane acrylate oligomer that offers high heat distortion temperatures. This product also offers high abrasion resistance, solvent resistance, and durability. BR-930D is perfect for 3D printing applications using SLA, 3D inkjet, and DLP printers. voir moins | |
| BR-941 | Bomar, formerly Dymax Oligomers & Coatings | BR-941, a hexafunctional aliphatic urethane acrylate, is used in applications that require a hard, chemically resistant, non-yellowing coating or adhesive with a very fast cure response. BR-941’s high functionality and low molecular weight deliver its exc...voir plus BR-941, a hexafunctional aliphatic urethane acrylate, is used in applications that require a hard, chemically resistant, non-yellowing coating or adhesive with a very fast cure response. BR-941’s high functionality and low molecular weight deliver its excellent properties to systems with a final viscosity much lower than is typical of urethane acrylates. BR-941 is compatible with a broad range of monomers and oligomers. voir moins | |
| BR-952 | Bomar, formerly Dymax Oligomers & Coatings | BR-952 is an aliphatic urethane dimethacrylate. The low viscosity allows for ease of use in coating applications for the nail care and 3D printing industries. BR-952 can be used to provide a high gloss, tough coating or 3D printed part. This material is a...voir plus BR-952 is an aliphatic urethane dimethacrylate. The low viscosity allows for ease of use in coating applications for the nail care and 3D printing industries. BR-952 can be used to provide a high gloss, tough coating or 3D printed part. This material is also used in coatings for construction applications when improved toughness is desired for excellent durability. BR-952 provides an inherently high HDT of 143°C and a Tg of 153°C, and is inherently tin-free. voir moins | |
| BR-970BT | Bomar, formerly Dymax Oligomers & Coatings | BR-970BT is a low molecular weight, difunctional aliphatic urethane acrylate. BR-970BT can be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970BT offers rapid cure and low-yellowing properties where premium performance...voir plus BR-970BT is a low molecular weight, difunctional aliphatic urethane acrylate. BR-970BT can be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970BT offers rapid cure and low-yellowing properties where premium performance is required. voir moins | |
| BR-970H | Bomar, formerly Dymax Oligomers & Coatings | BR-970H is a low viscosity, difunctional, aliphatic urethane acrylate. BR-970H has a high modulus and doesn't necessarily need to be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970H offers rapid cure and non-yellowin...voir plus BR-970H is a low viscosity, difunctional, aliphatic urethane acrylate. BR-970H has a high modulus and doesn't necessarily need to be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970H offers rapid cure and non-yellowing properties where premium performance is required. This oligomer is perfect for 2D and 3D inkjet applications as well as for use in graphic arts application. voir moins | |
| BR-990 | Bomar, formerly Dymax Oligomers & Coatings | BR-990, an aliphatic polyether urethane triacrylate, is a more flexible option from the BR-900 series of high-purity oligomers. BR-990 can be used effectively in performance coatings applications needing a greater degree of flexibility than is offered by ...voir plus BR-990, an aliphatic polyether urethane triacrylate, is a more flexible option from the BR-900 series of high-purity oligomers. BR-990 can be used effectively in performance coatings applications needing a greater degree of flexibility than is offered by higher functionality materials of the same product line. In addition, BR-990 offers one of the lowest viscosity profiles of any urethane acrylate. voir moins | |
| BRC-441D | Bomar, formerly Dymax Oligomers & Coatings | BRC-441D is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical and temperature resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated i...voir plus BRC-441D is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical and temperature resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated into tough, impact resistant 3D printing resins with excellent flexibility. It’s ultra-low water absorption makes this an excellent choice for moisture sensitive or hydrophobic applications. voir moins | |
| BRC-4421 | Bomar, formerly Dymax Oligomers & Coatings | BRC-4421 is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical- and temperature-resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated ...voir plus BRC-4421 is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical- and temperature-resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated into tough, impact resistant 3D printing resins with excellent flexibility. It’s ultra-low water absorption makes this an excellent choice for moisture-sensitive or hydrophobic applications. voir moins | |
| BRC-443 | Bomar, formerly Dymax Oligomers & Coatings | BRC-443 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective low-yellowing, protective single-coating that extends the substra...voir plus BRC-443 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective low-yellowing, protective single-coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443 exhibits retention of mechanical properties after exposure to high temperatures (200°C for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443 also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene. voir moins | |
| BRC-443D | Bomar, formerly Dymax Oligomers & Coatings | BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substr...voir plus BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443D exhibits retention of mechanical properties after exposure to high temperatures (200°C for at least 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443D also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene. voir moins | |
| BRC-841 | Bomar, formerly Dymax Oligomers & Coatings | BRC-841 is a low-molecular-weight, difunctional, hydrophobic urethane acrylate that can be effectively formulated for steel and various plastic hard coatings. The resulting hard, tough film makes an effective non-yellowing protective single-coating. The l...voir plus BRC-841 is a low-molecular-weight, difunctional, hydrophobic urethane acrylate that can be effectively formulated for steel and various plastic hard coatings. The resulting hard, tough film makes an effective non-yellowing protective single-coating. The low water absorption and alkaline resistance make BRC-841 ideal for the following industries: aerospace, automotive, appliances, cosmetic, electronic, industrial, medical devices, metal finishing, and UV-curable inks and coatings. voir moins | |
| BRC-843 | Bomar, formerly Dymax Oligomers & Coatings | BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substr...voir plus BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substrates use-life. The low water absorption and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, cosmetic, electronic, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-843 exhibits retention of mechanical properties after exposure to high temperatures (200°C for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-843 also shows excellent adhesion to ABS, PVC, PMMA, and polystyrene. voir moins | |
| BRC-8430E | Bomar, formerly Dymax Oligomers & Coatings | BRC-8430E is a reduced-functionality version of BRC-843S that provides improved flexiblity and reduced modulus compared with BRC-843S. The hydrophobic and temperature resistant backbone of BRC-8430E combined with the low modulus make BRC-8430E an excellen...voir plus BRC-8430E is a reduced-functionality version of BRC-843S that provides improved flexiblity and reduced modulus compared with BRC-843S. The hydrophobic and temperature resistant backbone of BRC-8430E combined with the low modulus make BRC-8430E an excellent candidate for moisture resistant adhesives, coatings, and resins, as well as formulations that need to pass autoclave or 85/85 testing. voir moins | |
| BRC-843S | Bomar, formerly Dymax Oligomers & Coatings | BRC-843S is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, non-yellowing, protective single-coating that extends the subst...voir plus BRC-843S is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, non-yellowing, protective single-coating that extends the substrates use-life. BRC-843S is a softer and more flexible version of BRC-843. This oligomer is also tougher then BRC-843. The low water absorption and alkaline resistance make this oligomer perfect for specialty applications in the following industries: aerospace, appliance, automotive, electronic, and medical device. voir moins | |
| BRC-843SD1 | Bomar, formerly Dymax Oligomers & Coatings | BRC-843SD1 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, nonyellowing, protective single-coating that extends the subs...voir plus BRC-843SD1 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, nonyellowing, protective single-coating that extends the substrates use-life. BRC-843SD1 is a softer and more flexible version of BRC-843. This oligomer is also tougher then BRC-843. The low water absorption and alkaline resistance make this oligomer perfect for specialty applications in the following industries: aerospace, appliance, automotive, electronic, and medical device. voir moins | |
| BRS-14320S | Bomar, formerly Dymax Oligomers & Coatings | BRS-14320S is a difunctional oligomer that combines a robust silicone backbone into a urethane acrylate oligomer. The resulting product provides an unusual combination of desirable properties: softness, flexibility, and temperature resistance. BRS-14320S ...voir plus BRS-14320S is a difunctional oligomer that combines a robust silicone backbone into a urethane acrylate oligomer. The resulting product provides an unusual combination of desirable properties: softness, flexibility, and temperature resistance. BRS-14320S is a candidate for consideration in formulating 100% UV soft-touch coatings and also for electronics applications. voir moins | |
| Dispurez® 103 | Incorez Ltd. | Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived fro...voir plus Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived from Dispurez® 103 exhibit good chemical, stain and hydrolysis resistance, making them a suitable non-hazardous foundation for durable rigid plastics, flexible films and waterproofing applications. voir moins | |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of wat...voir plus DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of water soluble resins. This product has a neutralization equivalent of 141.0 max., a decomposition temperature of 230°C, and a water insolubles amount of 50.0ppm max. The neopentyl structure of this trifunctional compound, having two primary hydroxyl groups and one tertiary carboxylic group, permits simplified processing by allowing the combining of all reactants in a single kettle charge. Good control of the reaction is possible due to the slower esterification rate of the tertiary carboxyl, assuring a uniform distribution of carboxyl groups along the resin backbone. The free acid group actively promotes resin water solubility or water dispersibility after neutralization with a base, easily introduces a polar group to improve coating adhesion and synthetic fiber dye receptivity, and increases the alkali solubility of deposited films. voir moins | |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA...voir plus DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA-0135 can be used to formulate high solids and NMP free polyurethane dispersions. It is a source of acid functionality for water-borne applications, is a co-resin to improve pigment wetting, dispersing and stabilizing. This product has an acid value of 100-115mg KOH/g, density @ 25°C of 1200-1235g/l, and a non-volatile content of 98% min. voir moins | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersio...voir plus DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersions. This product offers increased hydroxyl concentration, increased coating hardness and chemical resistance. It has low crystallinity and allows for ease of handling at lower temperatures. DMPA® Polyol HA-0135LV2 has a hydroxyl value of 330-345mg KOH/g, a density @ 25°C of 1170-1200g/l, a viscosity @ 25°C of 172 poise, and a colour content (APHA) of < 250 max. voir moins | |
| Dual-Cure 3401 | Bomar, formerly Dymax Oligomers & Coatings | Dual-Cure 3401 is designed for rapid bonding of a wide variety of plastic and metal substrates and is ideally suited for PC and ABS bonding applications. The product provides superior bond strength and is formulated with a UV/visible light and secondary a...voir plus Dual-Cure 3401 is designed for rapid bonding of a wide variety of plastic and metal substrates and is ideally suited for PC and ABS bonding applications. The product provides superior bond strength and is formulated with a UV/visible light and secondary ambient moisture-cure system for curing in shadow areas. Dual-Cure 3401 is also moisture and thermal resistant, has low shrinkage, and fluoresces blue under low-intensity “black light” (365 nm) for easy in-line inspection. Dual-Cure 3401 has applications that include plastic assembly, appliance assembly, and bonding, sealing, or encapsulating PC and ABS components. voir moins | |
| Dymax 8-20626 | Bomar, formerly Dymax Oligomers & Coatings | Dymax 8-20626 is an epoxy resin adhesive that forms bonds to a variety of materials. Bonds form rapidly between close-fitting substrates upon induction or heat curing. Dymax 8-20626 exhibits thermal shock characteristics and adhesion to a wide variety of ...voir plus Dymax 8-20626 is an epoxy resin adhesive that forms bonds to a variety of materials. Bonds form rapidly between close-fitting substrates upon induction or heat curing. Dymax 8-20626 exhibits thermal shock characteristics and adhesion to a wide variety of plated surfaces. It is formulated as a one-part epoxy adhesive, and requires no mixing or activator application. Dymax 8-20626 can be used on metal surfaces, glass, ceramics, thermoset plastics, and filled nylon. voir moins |
