| Aldirez BH | Incorez Ltd. | Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where ...voir plus Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where it is used to prevent gassing in sealant and adhesive applications. voir moins | |
| Amirez 142 | Incorez Ltd. | Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitabl...voir plus Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitable for floor nd wall applications. It has rapid hardness development as well as good anti-corrosion and chemical resistance. It has improved flexibility, excellent aqueous dilution stability, and a fast cure with visible end of pot life. voir moins | |
| Amirez 148/010 | Incorez Ltd. | Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosi...voir plus Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosity, zero VOC, and good freeze/thaw stability. It is completely compatible with cement and calcium salt and is particularly well suited for high temperature climates. Incorez 148/010 is used fro floor and wall paints, hygiene coatings, concrete primers, and gloss paints. voir moins | |
| Amirez 148/024 | Incorez Ltd. | Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and...voir plus Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and good freeze/thaw stability. It has fast cure and excellent gloss retention and chemical resistance. Incorez 148/024 is used for floor and wall paints, anti-graffiti coatings, concrete primers, and gloss paints. voir moins | |
| Amirez 148/055 | Incorez Ltd. | Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure devel...voir plus Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure development. voir moins | |
| BENAQUA® 4000 | Elementis | BENAQUA® 4000 is an easily dispersible powder designed for lower-gloss and matt latex paints, textured and high-build coatings and water-borne adhesives. It is especially useful in systems that are diluted with water prior to use. | |
| BENTONE® 1000 | Elementis | BENTONE® 1000 is an organic solventborne derivative of bentonite clay. This highly efficient and cost- effective rheological additive is designed for low- to intermediate polarity organic systems. | |
| BENTONE® 27 | Elementis | BENTONE® 27 is an organic solventborne derivative of a hectorite clay. It is designed for moderate to high-polarity organic systems and for synthetic binders. | |
| BENTONE® 34 | Elementis | BENTONE® 34 is an organic solventborne derivative of a special smectite designed for low to intermediate polarity organic systems. | |
| BENTONE® 38 | Elementis | BENTONE® 38 is an organic solventborne derivative of a hectorite clay. This highly efficient rheological additive is designed for low to intermediate polarity organic systems. | |
| BENTONE® 57 | Elementis | BENTONE® 57 is an organic solventborne derivative of bentonite clay. This highly efficient and cost-effective rheological additive is designed for high-polarity organic systems. | |
| BENTONE® CT | Elementis | BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier tha...voir plus BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier that prevents hard settling and builds thixotropy. voir moins | |
| BENTONE® DE | Elementis | BENTONE® DE is a highly beneficiated, waterborne hyperdispersible powdered hectorite clay. | |
| BENTONE® DY CE | Elementis | BENTONE® DY CE is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | |
| BENTONE® EW NA | Elementis | BENTONE® EW NA is a highly beneficiated, easily dispersible waterborne powdered smectite clay. | |
| BENTONE® GS | Elementis | BENTONE® GS is a beneficiated, waterborne powdered smectite clay specifically developed for construction applications. | |
| BENTONE® HD | Elementis | BENTONE® HD is a highly beneficiated hyperdispersible powdered waterborne hectorite clay. | |
| BENTONE® LT | Elementis | BENTONE® LT is an organically modified powdered clay additive designed for water-borne systems, primarily latex paints. | |
| BENTONE® NP-10 | Elementis | BENTONE® NP-10 is a solventborne, high- efficiency, easy-to-use organoclay. It is an ideal rheological additive for inks formulated with petroleum/vegetable oils and low polarity solvents. | |
| BENTONE® OC | Elementis | BENTONE® OC is a waterborne rheological additve based untreated hectorite clay with a defined particle size. This rheology modifieris suitable for thickening and control of workability and flow of mineral-based aqueous construction systems. | |
| BENTONE SD® 1 | Elementis | BENTONE SD® 1 is an organic solventborne derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium- polarity solvents.BENTONE SD® 1 can be added at any point in the pa...voir plus BENTONE SD® 1 is an organic solventborne derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium- polarity solvents.BENTONE SD® 1 can be added at any point in the paint manufacturing process and can be used for post-correction. It provides viscosity increase, reduces sagging of coatings on vertical surfaces and prevents settling of pigments and fillers. voir moins | |
| BENTONE SD® 2 | Elementis | BENTONE SD® 2 is an organic solventborne derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvent...voir plus BENTONE SD® 2 is an organic solventborne derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents. BENTONE SD® 2 is easy to incorporate and can be added dry to the pigment grinding process without requiring the use of a chemical activator or the preparation of a pregel. It may be used for post correction. voir moins | |
| BENTONE SD® 3 | Elementis | BENTONE SD® 3 is an organic solventborne derivative of a hectorite clay. It is highly efficient and designed for use in coating systems with a wide range of solvent polarities. This product must be dispersed in the pigment milling stage. It does not requi...voir plus BENTONE SD® 3 is an organic solventborne derivative of a hectorite clay. It is highly efficient and designed for use in coating systems with a wide range of solvent polarities. This product must be dispersed in the pigment milling stage. It does not require pre-gelling or a chemical activator. Post correction with BENTONE SD® 3 is not recommended. It also has rheological additive provides stable viscosity, controls sag and suspends pigments. voir moins | |
| DAPRO® DF 1492 | Elementis | DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should...voir plus DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should be used whenever an immediate short-term effect is needed. All non-volatile components of DAPRO® DF 1492 Foam Suppressor are FDA compliant under CFR Title 21 175.300. voir moins | |
| DAPRO® DF 1760 | Elementis | DAPRO® DF 1760 is a highly effective, silicone free, long lasting waterborne bubble breaker. This product remains effective after extended storage of the system in which it is used. All non-volatile components of DAPRO® DF 1760 Foam Suppressor are FDA com...voir plus DAPRO® DF 1760 is a highly effective, silicone free, long lasting waterborne bubble breaker. This product remains effective after extended storage of the system in which it is used. All non-volatile components of DAPRO® DF 1760 Foam Suppressor are FDA compliant under CFR Title 21 175.105; 175.300; 176.170 and 176.180. voir moins | |
| DAPRO® DF 5300 | Elementis | DAPRO® DF 5300 is a bubble releasing, anti-foaming agent for variety of solvent-borne coatings. Applications include alkyd enamels, PUR, epoxies, and acrylics. | |
| DAPRO® DF 6800 | Elementis | DAPRO® DF 6800 is a mineral oil -free solventborne let down defoamer for architectural and industrial coatings, espcially in thick film epoxy floor coatings and other high-build systems. | |
| DAPRO® DF 7005 | Elementis | DAPRO® DF 7005 is a silicone free liquid defoamer, economical in use, for universal waterborne applications. The product shows very good long-term efficiency. | |
| DAPRO® DF 7010 | Elementis | DAPRO® DF 7010 is a liquid defoamer, economical in use, for universal waterborne applications The product shows very good long-term efficiency. | |
| DAPRO® DF 7015 | Elementis | DAPRO® DF 7010 is a defoamer for waterborne systems with very good emulsifying properties. It is specially recommended for use in grinding pastes, emulsion paints and inks. | |
| DAPRO® DF 7540 | Elementis | DAPRO® DF 7540 is a silicone free liquid defoamer for use in waterborne systems. This product has outstanding emulsifying properties in water. | |
| DAPRO® DF 7580 | Elementis | DAPRO® DF 7580 is a silicone free defoamer for waterborne systems. This product is very easily emulsifiable in water. | |
| DAPRO® DF 880 | Elementis | DAPRO® DF 880 is a silicone free air release additive that can be used to prevent foam formation in waterborne coating systems. This product provides rapid bubble breaking in applied wet films and also prevents the entrapment of air during processing step...voir plus DAPRO® DF 880 is a silicone free air release additive that can be used to prevent foam formation in waterborne coating systems. This product provides rapid bubble breaking in applied wet films and also prevents the entrapment of air during processing steps such as grinding, stirring and pumping. voir moins | |
| DAPRO® DF 975 | Elementis | DAPRO® DF 975 is a silicone-free waterborne defoamer based on a dispersion of olefinic solids. This product imparts excellent foam control properties in architectural, industrial paints and coatings and inks. | |
| DAPRO® FA-NCO-6 | Elementis | DAPRO® FA-NCO-6 is a solventborne dispersion of flatting agents in mineral sprits. It provides simple stir-in incorporation, uniform and efficient gloss reduction and consistency. | |
| DAPRO® FK 321 | Elementis | DAPRO® FK 321 is an effective solventborne auxiliary for reducing the resistance of paints that are sprayed electrostatically. | |
| DAPRO® FX 511 | Elementis | DAPRO® FX 511 is a low odour waterborne coalescing agent that has been designed for dispersions, dispersion paints and plasters. | |
| DAPRO® FX 513 | Elementis | DAPRO® FX 513 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC paint systems. This product shows excellent film formation, scrub resistance, improved gloss and open-time. | |
| DAPRO® FX 514 | Elementis | DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514...voir plus DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514 shows excellent film formation, scrub resistance, improved gloss and open-time. voir moins | |
| DAPRO® NA 1622 | Elementis | DAPRO® NA 1622 is a silicone modified liquid defoamer for use in solvent systems. It has outstanding defoaming properties in a variety of solvent systems. DAPRO® NA 1622 is easy to incorporate in solventborne coatings and inks. | |
| DAPRO® U-99 | Elementis | DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as w...voir plus DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as waterborne and solvent based alkyd systems and decorative coatings. voir moins | |
| DAPRO® W-77 | Elementis | DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-w...voir plus DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-wet or contaminated surfaces. DAPRO® W-77 also provides excellent recoatability. DAPRO® W-77 is silicone - free. voir moins | |
| DAPRO® W-95HS | Elementis | DAPRO® W-95HS is a surface tension modifier for waterborne systems. This product improves flow and leveling properties of coatings and inks. | |
| Dispurez® 103 | Incorez Ltd. | Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived fro...voir plus Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived from Dispurez® 103 exhibit good chemical, stain and hydrolysis resistance, making them a suitable non-hazardous foundation for durable rigid plastics, flexible films and waterproofing applications. voir moins | |
| Incorez STP | Incorez Ltd. | Incorez STP is a Silane Terminated Polyurethane that combines the properties of polyurethane with those of a silicone but without their respective drawbacks. This prepolymer is primarily designed to act as a binder for moisture-curing sealants and elastic...voir plus Incorez STP is a Silane Terminated Polyurethane that combines the properties of polyurethane with those of a silicone but without their respective drawbacks. This prepolymer is primarily designed to act as a binder for moisture-curing sealants and elastic adhesives. It is a high molecular weight prepolymer consisting of a polyurethane backbone and a tri-functional silane end group. voir moins | |
| Incorez STP | Incorez Ltd. | Incorez STP is an aliphatic silane terminated polyurethane that combines the properties of polyurethane with those of a silicone but without their respective drawbacks. This pre-polymer is primarily designed to act as a binder for moisture-curing sealants...voir plus Incorez STP is an aliphatic silane terminated polyurethane that combines the properties of polyurethane with those of a silicone but without their respective drawbacks. This pre-polymer is primarily designed to act as a binder for moisture-curing sealants and elastic adhesives. It is a high molecular weight pre-polymer consisting of a polyurethane backbone and a tri-functional silane end group. voir moins | |
| Incorez W2205 | Incorez Ltd. | Incorez W2205 is an universal hard grade with good balance of chemical and physical resistance properties. It has excellent gloss and rapid hardness development. It is used for wood finishes, coatings for plastics, mulit-surface, floor, and wall paints. T...voir plus Incorez W2205 is an universal hard grade with good balance of chemical and physical resistance properties. It has excellent gloss and rapid hardness development. It is used for wood finishes, coatings for plastics, mulit-surface, floor, and wall paints. This product is part of the Incorez W2005 series, which is a range of NMP free, aliphatic polyurethane/acrylic hybrid dispersions. The series combines the performance advantages of urethanes such as toughness, abrasion resistance, and flexibility, with those of acrylics including weatherability, hardness and pigmentability. voir moins | |
| Incorez W2605 | Incorez Ltd. | Incorez W2605 is a hard yet flexible system with excellent alcohol and water resistance. It has good print properties and has excellent adhesion to many substrates. It is used in wood finishes, paper coatings, print-receptive coatings, as well as inks and...voir plus Incorez W2605 is a hard yet flexible system with excellent alcohol and water resistance. It has good print properties and has excellent adhesion to many substrates. It is used in wood finishes, paper coatings, print-receptive coatings, as well as inks and over-print lacquers. This product is part of the Incorez W2005 series, which is a range of NMP free, aliphatic polyurethane/acrylic hybrid dispersions. The series combines the performance advantages of urethanes such as toughness, abrasion resistance, and flexibility, with those of acrylics including weatherability, hardness and pigmentability. voir moins | |
| Incorez W835/140 | Incorez Ltd. | Incorez W835/140 is a NMP free, water based polyurethane dispersion. It has excellent chemical and stain resistance as well as good compatibility with acrylic emulsions. It is used in ink and print applications and floor and wall coatings. This product is...voir plus Incorez W835/140 is a NMP free, water based polyurethane dispersion. It has excellent chemical and stain resistance as well as good compatibility with acrylic emulsions. It is used in ink and print applications and floor and wall coatings. This product is a part of the Incorez W835 series which has been developed to offer superior performance with the added benifits of no NMP and low VOC content. Furthermore, they are low irritancy and non-harmful, thus allowing formulators to meet increasingly stringent regulations. voir moins | |
| Incorez W835/177 | Incorez Ltd. | Incorez W835/177 is a NMP free, co-solvent free polyurethane dispersion. It has excellent mechanical properties, impact resistance, and adhesion to plastics. It is used for plastic coatings. This product is a part of the Incorez W835 series which has been...voir plus Incorez W835/177 is a NMP free, co-solvent free polyurethane dispersion. It has excellent mechanical properties, impact resistance, and adhesion to plastics. It is used for plastic coatings. This product is a part of the Incorez W835 series which has been developed to offer superior performance with the added benifits of no NMP and low VOC content. Furthermore, they are low irritancy and non-harmful, thus allowing formulators to meet increasingly stringent regulations. voir moins | |
| Incorez W835/256 | Incorez Ltd. | Incorez W835/256 is a NMP free polyurethane dispersion. It is a self-crosslinking PUD with excellent chemical and stain resistance. It is used in wall and floor coatings as well as coatings for wood/parquet flooring. This product is a part of the Incorez ...voir plus Incorez W835/256 is a NMP free polyurethane dispersion. It is a self-crosslinking PUD with excellent chemical and stain resistance. It is used in wall and floor coatings as well as coatings for wood/parquet flooring. This product is a part of the Incorez W835 series which has been developed to offer superior performance with the added benifits of no NMP and low VOC content. Furthermore, they are low irritancy and non-harmful, thus allowing formulators to meet increasingly stringent regulations. voir moins | |
| Incorez W835/494 | Incorez Ltd. | Incorez W835/494 is a NMP free polyurethane dispersion. It is a non irritant, co-solvent free product with a tough backbone and excellent water resistance. It is used in textile soft-feel coatings, coatings for plastics, and biomedical devices. This produ...voir plus Incorez W835/494 is a NMP free polyurethane dispersion. It is a non irritant, co-solvent free product with a tough backbone and excellent water resistance. It is used in textile soft-feel coatings, coatings for plastics, and biomedical devices. This product is a part of the Incorez W835 series which has been developed to offer superior performance with the added benifits of no NMP and low VOC content. Furthermore, they are low irritancy and non-harmful, thus allowing formulators to meet increasingly stringent regulations. voir moins | |
| Incozol 2 | Incorez Ltd. | Incozol 2 acts as an effective moisture scavenger in polyurethane coatings and sealants. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and...voir plus Incozol 2 acts as an effective moisture scavenger in polyurethane coatings and sealants. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and prevents bubbling and downglossing caused by high moisture levels either on the substrate or from the atmosphere. Incozol 2 is used in one or two component systems but is not generally recommended in one component systems with a low NCO content. voir moins | |
| Incozol 4 | Incorez Ltd. | Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in both one and two component PU systems. In one component systems it i...voir plus Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in both one and two component PU systems. In one component systems it is normally used with aliphatic prepolymers. In two component systems it can also be used with aromatic prepolymers or isocyanates. voir moins | |
| Incozol BH | Incorez Ltd. | Incozol BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker and benzaldehyde. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic p...voir plus Incozol BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker and benzaldehyde. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers. voir moins | |
| Incozol EH | Incorez Ltd. | Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings, adhesives, sealants and elastomers. Used in conjunction with a low NCO polyurethane prepolymer, this hardener accelerates the cure of the prepolymer through ...voir plus Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings, adhesives, sealants and elastomers. Used in conjunction with a low NCO polyurethane prepolymer, this hardener accelerates the cure of the prepolymer through a moisture triggered mechanism to afford crosslinking benefits to the 1K urethane. In addition, it enhances properties such as through cure development and mechanical strength through the elimination of CO2 gassing in high build, high solids PU systems. Incozol EH confers tolerance to the repeated opening of containers and can be used as a versatile curing agent with 2 or 4 functional mix ratios. It can also be handled and stored at temperatures as low as -15ºC without risk of crystallisation. voir moins | |
| Incozol LV | Incorez Ltd. | Incozol LV is a reactive diluent designed to help producers of polyurethane coatings and sealants attain low VOC systems. It is used in the formulation of two component coatings where Incozol LV replaces a portion of the polyol component, for example, aut...voir plus Incozol LV is a reactive diluent designed to help producers of polyurethane coatings and sealants attain low VOC systems. It is used in the formulation of two component coatings where Incozol LV replaces a portion of the polyol component, for example, automotive refinish and OEM coatings. Other uses include high solids PU coatings for boats, industrial maintenance, aircraft, automotive sealants, anti-graffiti lacquers and waterproof coatings. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| M-P-A® 2000 X | Elementis | M-P-A® 2000 X is an easily incorporated, highly efficient organic solventborne antisettling and sag control additive supplied as a pourable dispersion in xylene. | |
| M-P-A® 3000 MS | Elementis | A liquid, 20% solids antisettling additive in Mineral Spirits. This highly effective, pourable additive is best suited to aliphatic solvent based systems where pigment suspension is not totally satisfactory when using only viscosity- building rheological ...voir plus A liquid, 20% solids antisettling additive in Mineral Spirits. This highly effective, pourable additive is best suited to aliphatic solvent based systems where pigment suspension is not totally satisfactory when using only viscosity- building rheological additives. M-P-A 3000 MS also effectively provides sag resistance in certain systems. voir moins | |
| M-P-A® 4020 BA | Elementis | M-P-A® 4020 BA is a solventborne/colorant HAPS-free and moisture free additive designed for highly efficient control of pigment settling in HAPS-free industrial finishes. | |
| M-P-A® 4020 BA2 | Elementis | M-P-A® 4020 BA2 is a HAPS-free and moisture free soft paste additive is designed for highly efficient control of pigment settling in HAPS-free industrial finishes. M-P-A 4020 BA 2 additive handles easily and disperses rapidly. It is organic in nature, hav...voir plus M-P-A® 4020 BA2 is a HAPS-free and moisture free soft paste additive is designed for highly efficient control of pigment settling in HAPS-free industrial finishes. M-P-A 4020 BA 2 additive handles easily and disperses rapidly. It is organic in nature, having a nominal non-volatile content of 20%. voir moins | |
| M-P-A® 4020 X | Elementis | M-P-A® 4020 X is a solventborne/colorant, highly stable, moisture-free, high efficiency, pourable antisettling agent offering the effectiveness of the M-P-A 1078 X additive in an easier to handle form. Use of this product as an additive in industrial fini...voir plus M-P-A® 4020 X is a solventborne/colorant, highly stable, moisture-free, high efficiency, pourable antisettling agent offering the effectiveness of the M-P-A 1078 X additive in an easier to handle form. Use of this product as an additive in industrial finishes yields superior control of pigment settling at lower additive levels than for conventional antisettling agents. It may be directly substituted on an equal solids basis for either M-P-A® 60X or M-P-A® 2000X. voir moins | |
| M-P-A® 60 MS | Elementis | M-P-A® 60 MS is a highly efficient organic solventborne/colorant antisettling agent and sag control additive supplied as a soft paste dispersed in mineral spirit. | |
| M-P-A® 60 X | Elementis | M-P-A® 60 X is a solventborne/colorant paste, anti-settling agent for industrial finishes. | |
| NALZIN® 2 | Elementis | NALZIN® 2 is a modern non-toxic anti-corrosive pigment suitable for waterborne and solvent-borne paints alike. Manufactured by a patented process, NALZIN® 2 has excellent corrosion-inhibiting properties and is cost-effective. | |
| NALZIN® FA 179 | Elementis | NALZIN® FA 179 is a recommended as a corrosion inhibitor for waterborne paint systems to counteract the formation of flash-rust. The product is also recommended for application as an inhibitor against the formation of in-can corrosion. Emulsified in water...voir plus NALZIN® FA 179 is a recommended as a corrosion inhibitor for waterborne paint systems to counteract the formation of flash-rust. The product is also recommended for application as an inhibitor against the formation of in-can corrosion. Emulsified in water, NALZIN® FA 179 can also be used as a temporary rust inhibitor. voir moins | |
| NALZIN® FA-379 | Elementis | NALZIN® FA-379 is a very effective liquid corrosion inhibitor for waterborne coatings; it counteracts both flash and early rusting. The product is nitrite-free but still performs excellently as a permanent corrosion inhibitor in coatings. | |
| NUOSPERSE® 15 | Elementis | NUOSPERSE® 15 is a multifunctional pigment dispersing additive/vehicle that has been developed for high performance solventborne coatings. | |
| NUOSPERSE® 2000 | Elementis | NUOSPERSE® 2000 is a waterborne liquid carrier/humectant for use in VOC- compliant colorants and pigment dispersions. | |
| NUOSPERSE® 2006 | Elementis | NUOSPERSE® 2006 is an organic-solvent free, anionic, waterborne surface active compound which can be used as a wetting agent in aqueous as well as organic- solvent borne systems. It has excellent substrate wetting properties. | |
| NUOSPERSE® 2008 | Elementis | NUOSPERSE® 2008 is a unique solvent free/NO- VOC waterborne/solventborne pigment dispersing agent specifically used in NO-VOC paints and pigment concentrates. The product is a liquid polymeric multi-functional surfactant and may be used in both aqueous as...voir plus NUOSPERSE® 2008 is a unique solvent free/NO- VOC waterborne/solventborne pigment dispersing agent specifically used in NO-VOC paints and pigment concentrates. The product is a liquid polymeric multi-functional surfactant and may be used in both aqueous as well as organic solvent based coatings and inks. voir moins | |
| NUOSPERSE® 657 NA | Elementis | NUOSPERSE® 657 NA is a highly effective in various types of organic and inorganic pigments. It is recommended for use in a wide range of high- performance, solvent-borne coatings. The product can also be used in vinyl applications. | |
| NUOSPERSE® 9100 | Elementis | NUOSPERSE® 9100 is a powder solventborne dispersing agent designed for high solids and UV systems. It is soluble in a wide variety of solvents, monomers, reactive diluents and compatible with most non-aqueous systems. It can be used as the sole dispersing...voir plus NUOSPERSE® 9100 is a powder solventborne dispersing agent designed for high solids and UV systems. It is soluble in a wide variety of solvents, monomers, reactive diluents and compatible with most non-aqueous systems. It can be used as the sole dispersing resin to prepare highly concentrated dispersions of both organic and inorganic pigments. voir moins | |
| NUOSPERSE® FA 115 | Elementis | NUOSPERSE® FA 115 is a waterborne additive to improve the incorporation of universal tinting pastes into the base dispersion paint. | |
| NUOSPERSE® FA 182 | Elementis | NUOSPERSE® FA 182 is an anionic waterborne/solventborne surface active compound which can be used as a wetting agent in dispersion paints. The product also reduces the resistance of electrostatic spray paints. | |
| NUOSPERSE® FA 196 | Elementis | NUOSPERSE® FA 196 is a highly concentrated liquid pigment waterborne/solventborne/colorant dispersing agent for application in organic solvent-borne systems. NUOSPERSE® FA 196 is especially recommended for application as a dispersing agent for carbon blac...voir plus NUOSPERSE® FA 196 is a highly concentrated liquid pigment waterborne/solventborne/colorant dispersing agent for application in organic solvent-borne systems. NUOSPERSE® FA 196 is especially recommended for application as a dispersing agent for carbon black, for thermoplastic acrylic systems and as an auxiliary product to improve the action of universal tinting pastes in basic alkyd paints. voir moins | |
| NUOSPERSE® FK 329 | Elementis | NUOSPERSE® FK 329 is a liquid solventborne corrosion inhibitor for non-aqueous systems. This product is also recommended as a cationic pigment dispersant. | |
| NUOSPERSE FN® 1566 | Elementis | NUOSPERSE FN® 1566 is a nonyl phenol ethoxylate waterborne surfactant. In general these ethoxylated compounds are resistant to acids and alkali, as well as weak oxidation and reduction agents. They are also totally compatible with both anionic and cationi...voir plus NUOSPERSE FN® 1566 is a nonyl phenol ethoxylate waterborne surfactant. In general these ethoxylated compounds are resistant to acids and alkali, as well as weak oxidation and reduction agents. They are also totally compatible with both anionic and cationic compounds. voir moins | |
| NUOSPERSE® FN 211 | Elementis | NUOSPERSE® FN 211 is a nonionic pigment wetting and dispersing agent primarily for use in waterborne coating formulations. This product is alkyl phenol ethoxylate-free and replaces traditionally used nonionic surfactants. | |
| NUOSPERSE® FN 260 | Elementis | NUOSPERSE® FN 260 is a unique, waterborne, labelling-free nonionic wetting agent and emulsifier. | |
| NUOSPERSE® FN 265 | Elementis | NUOSPERSE® FN 265 is an alkylphenol-free, nonionic waterborne wetting agent and emulsifier. | |
| NUOSPERSE® FX 365 | Elementis | NUOSPERSE® FX 365 is a nonionic polymeric wetting and dispersing agent for use in waterborne coating and ink formulations and pigment pastes. This product shows outstanding pigment wetting and stabilizing properties. | |
| NUOSPERSE® FX 504 | Elementis | NUOSPERSE® FX 504 is a low-foaming, polymeric waterborne pigment dispersing agent that works effectively for many hydrophilic pigments and extenders that are used in aqueous coatings. | |
| NUOSPERSE® FX 600 | Elementis | NUOSPERSE® FX 600 is a highly effective pigment dispersing agent for use in waterborne industrial coatings, protective coatings, gloss dispersion paints, colorants and also printing inks. The product is a liquid, multi-functional polymer and is free of or...voir plus NUOSPERSE® FX 600 is a highly effective pigment dispersing agent for use in waterborne industrial coatings, protective coatings, gloss dispersion paints, colorants and also printing inks. The product is a liquid, multi-functional polymer and is free of organic solvents. voir moins | |
| NUOSPERSE® FX 605 | Elementis | NUOSPERSE® FX 605 is a low-foaming pigment dispersing agent for waterborne systems. It counter-acts pigment flocculation in weak acid, neutral and strongly alkaline media. The product is also stable against hydrolysis and thus retains its activity even af...voir plus NUOSPERSE® FX 605 is a low-foaming pigment dispersing agent for waterborne systems. It counter-acts pigment flocculation in weak acid, neutral and strongly alkaline media. The product is also stable against hydrolysis and thus retains its activity even after extended storage of the coating system. voir moins | |
| NUOSPERSE® W-22 | Elementis | NUOSPERSE® W-22 is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the finished dispersion to prevent flocculation and viscosity drift. | |
| NUOSPERSE® W-28 | Elementis | NUOSPERSE® W-28 is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the finished dispersion to prevent flocculation and viscosity drift. | |
| NUOSPERSE® W-30 | Elementis | NUOSPERSE® W-30 is an environmentally friendly waterborne dispersing agent that can be used with all types of pigments to help provide full color development and maximum production output. It is highly effective in wetting and dispersing pigments in water...voir plus NUOSPERSE® W-30 is an environmentally friendly waterborne dispersing agent that can be used with all types of pigments to help provide full color development and maximum production output. It is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the finished dispersion to prevent re-flocculation and viscosity drift. voir moins | |
| NUOSPERSE® W-33 | Elementis | NUOSPERSE® W-33 is a dispersing agent that can be used with a variety of pigments to help provide full colour development and maximum production output. It is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the f...voir plus NUOSPERSE® W-33 is a dispersing agent that can be used with a variety of pigments to help provide full colour development and maximum production output. It is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the finished dispersion to prevent reflocculation and viscosity drift. NUOSPERSE® W-33 is low VOC and free of Alkylphenolethoxylates. voir moins | |
| NUOSPERSE® W-39 | Elementis | NUOSPERSE® W-39 is an environmentally friendly waterborne/colorant dispersing agent that can be used with a variety of pigments to help provide full color development and maximum production output. It is highly effective in wetting and dispersing pigments...voir plus NUOSPERSE® W-39 is an environmentally friendly waterborne/colorant dispersing agent that can be used with a variety of pigments to help provide full color development and maximum production output. It is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the finished dispersion to prevent re-flocculation and viscosity drift. voir moins | |
| NUOSPERSE® XL-1/80 | Elementis | NUOSPERSE® XL-1/80 is solventborne/colorant, and is designed for use in manufacturing of glycol-free universal colorants for in-plant and machine tinting. This product is also used as an additive to improve compatibility of colorant/paint systems. | |
| POST® 4 | Elementis | POST® 4 is a castor based solventborne additive designed to be added to the let-down of a paint to boost viscosity and sag resistance. It is primarily designed for non-aqueous aliphatic coatings systems. The ability to be post added, allows this product t...voir plus POST® 4 is a castor based solventborne additive designed to be added to the let-down of a paint to boost viscosity and sag resistance. It is primarily designed for non-aqueous aliphatic coatings systems. The ability to be post added, allows this product to be used as a post corrective agent for addition to finished batches of paint in need of flow correction and/or pigment suspension enhancement. voir moins | |
| RHEOLATE® 1 | Elementis | RHEOLATE® 1 is an economical and versatile product in emulsion form for a variety of water-borne systems. It is used as an additive with a high thickening efficiency in the medium- shear-rate range and imparts excellent pigment suspension properties. Unli...voir plus RHEOLATE® 1 is an economical and versatile product in emulsion form for a variety of water-borne systems. It is used as an additive with a high thickening efficiency in the medium- shear-rate range and imparts excellent pigment suspension properties. Unlike other acrylic thickeners, RHEOLATE® 1 does not impair gloss. voir moins | |
| RHEOLATE® 101 | Elementis | RHEOLATE® 101 is an economical and versatile product in powder form for a variety of water-borne systems. It is used as an additive and is chemically identical to the active component in RHEOLATE® 1 rheological additive. Its dry powder form is easier to s...voir plus RHEOLATE® 101 is an economical and versatile product in powder form for a variety of water-borne systems. It is used as an additive and is chemically identical to the active component in RHEOLATE® 1 rheological additive. Its dry powder form is easier to store and is non-freezing. RHEOLATE® 101 is easily incorporated dry as a powder in the mill- base or as a pregel in water. voir moins | |
| RHEOLATE® 125 | Elementis | RHEOLATE® 125 is an alkali swellable waterborne emulsion based on an acrylic backbone. It is used as an additive and is cost effective with high thickening efficiency in the low to medium-shear-rate range. It is high shear properties provide excellent ato...voir plus RHEOLATE® 125 is an alkali swellable waterborne emulsion based on an acrylic backbone. It is used as an additive and is cost effective with high thickening efficiency in the low to medium-shear-rate range. It is high shear properties provide excellent atomization. voir moins | |
| RHEOLATE® 2001 | Elementis | RHEOLATE® 2001 is a highly efficient, pourable liquid, waterborne antisettling additive for use in water- reducible coatings and inks. | |
| RHEOLATE® 212 | Elementis | RHEOLATE® 212 is 20% solids, VOC-free polyether polyurethane associative flow modifier for aqueous applications. It is designed for use in emulsion paints and other waterborne systems including inks, textile coatings, adhesives and sealants where maintain...voir plus RHEOLATE® 212 is 20% solids, VOC-free polyether polyurethane associative flow modifier for aqueous applications. It is designed for use in emulsion paints and other waterborne systems including inks, textile coatings, adhesives and sealants where maintaining viscosity at high shear during product application and improved film leveling are required. voir moins |
