| Benzethonium Chloride USP | Netchem |
|
Benzethonium Chloride USP is a quaternary amine antimicrobial that can also be used as a personal care preservative. Benzethonium chloride exhibits a broad spectrum of microbiocidal activity against bacteria, fungi, mold and viruses. It has been shown to...voir plus
Benzethonium Chloride USP is a quaternary amine antimicrobial that can also be used as a personal care preservative. Benzethonium chloride exhibits a broad spectrum of microbiocidal activity against bacteria, fungi, mold and viruses. It has been shown to increase moisture levels in the skin with repeated use. Its quaternary nitrogen is attracted to the skin and hair and contributes to a soft, powdery after-feel. The suggested usage levels are 0.5% for skin applications, and 0.02% for eye area products. It can be added at room and elevated temperatures in any phase of production and is soluble in water, lower alcohols and glycols. It is compatible with a wide variety of formulations, and effective over a wide pH range. voir moins
Compliance Highlights Available
|
|
| BENZOPHENONE-4 | Netchem |
|
Benzophenone 4, also known as sulisobenzone, is a member of a family of similar molecules which are generally employed as UV absorbers. Benzophenones are most often found in sunscreens but can be found in personal care products like nail polishes, and sh...voir plus
Benzophenone 4, also known as sulisobenzone, is a member of a family of similar molecules which are generally employed as UV absorbers. Benzophenones are most often found in sunscreens but can be found in personal care products like nail polishes, and shampoos. The FDA has approved benzophenone 4 for use in OTC sunscreens at concentrations up to 10%. As a sunscreen, it works as a secondary UV absorber and is combined with other UV absorbers to provide full protection.
Benzophenone 4 is more often used as a photoprotectant to maintain a products color when in clear packaging. voir moins
Compliance Highlights Available
|
|
| BKC | Netchem |
|
BKC, Benzalkonium chloride, is a quaternary ammonium compound. It is a mixture of alkylbenzyldimethylammonium chlorides. The three main uses areas: a biocide, a cationic surfactant, and a phase transfer agent. Benzalkonium chloride is used in fabric soft...voir plus
BKC, Benzalkonium chloride, is a quaternary ammonium compound. It is a mixture of alkylbenzyldimethylammonium chlorides. The three main uses areas: a biocide, a cationic surfactant, and a phase transfer agent. Benzalkonium chloride is used in fabric softeners, cosmetics, shampoos, conditioners, and body lotions. As a biocide it is among the most common active ingredients in household and industrial disinfectants. voir moins
Compliance Highlights Available
|
|
| Carbomer 940 | Netchem |
|
Carbomer 940 is a water soluble cross-linked polyacrylate polymer rheology modifier. It is an emulsifying, stabilizing, thickening and gelling agent. It is used in hair gels; hand, body and face lotions. Carbomer 940 is short flow, high clarity, high visc...voir plus
Carbomer 940 is a water soluble cross-linked polyacrylate polymer rheology modifier. It is an emulsifying, stabilizing, thickening and gelling agent. It is used in hair gels; hand, body and face lotions. Carbomer 940 is short flow, high clarity, high viscosity, and compatible with many materials used in gels. voir moins
Compliance Highlights Available
|
|
| Chloroxylenol | Netchem |
|
Chloroxylenol, or para-chlorometaxylenol (PCMX), is an antiseptic and disinfectant agent used for skin disinfection and surgical instruments. It is found in antibacterial soaps, wound-cleansing applications, and household antiseptics. It is bactericidal a...voir plus
Chloroxylenol, or para-chlorometaxylenol (PCMX), is an antiseptic and disinfectant agent used for skin disinfection and surgical instruments. It is found in antibacterial soaps, wound-cleansing applications, and household antiseptics. It is bactericidal against most gram-positive bacteria. PCMX is on the World Health Organization's List of Essential Medicines. PCMX is used as a preservative in cooling fluids, cosmetics, topical medications, urinary antiseptics and metal working fluids. voir moins
Compliance Highlights Available
|
|
| EDTA 2Na | Netchem |
|
EDTA 2Na is incorporated in personal care products to chelate and sequester metal ions, in an effort to increase shelf life and enhance the products foaming properties. EDTA is used in shampoo, dyes, lotion, gel, cosmetics. EDTA 2Na has a pH lower than 7.
Compliance Highlights Available
|
|
| EDTA 4Na | Netchem |
|
EDTA 4Na is incorporated in personal care products to chelate and sequester metal ions, in an effort to increase shelf life and enhance the products foaming properties. EDTA is used in shampoo, dyes, lotion, gel, cosmetics. EDTA 4Na has a pH higher than 7...voir plus
EDTA 4Na is incorporated in personal care products to chelate and sequester metal ions, in an effort to increase shelf life and enhance the products foaming properties. EDTA is used in shampoo, dyes, lotion, gel, cosmetics. EDTA 4Na has a pH higher than 7. voir moins
Compliance Highlights Available
|
|
| Ethylhexylglycerin | Netchem |
|
Ethylhexylglycerin (EHG) is incorporated in personal care formulations. It can be found in hair care products, lotions, cleansers, deodorants, makeup, and suntan products. EHG may function as a preservative (or preservative booster), surfactant, or skin c...voir plus
Ethylhexylglycerin (EHG) is incorporated in personal care formulations. It can be found in hair care products, lotions, cleansers, deodorants, makeup, and suntan products. EHG may function as a preservative (or preservative booster), surfactant, or skin conditioner. EHG acts a preservative by disrupting the surface tension and potentially damaging a bacteria’s cell membrane. In this way, EHG may enhance the function of other preservatives, such as phenoxyethanol, isothiazolinones, or parabens. As a surfactant, EHG lowers the surface tension between two substances. This is useful in skincare and cosmetics where mixtures of oil and water-based ingredients are required. Regarding skin conditioning, EHG is an emollient and mild humectant. voir moins
Compliance Highlights Available
|
|
| Glycolic Acid 70% Solution | Netchem |
Glycolic acid, also called hydroxyacetic acid, is the smallest alpha-hydroxy acid (AHA). It is used in skin-care products as an exfoliant and moisturizer. It may reduce wrinkles, and acne scarring. A major use of glycolic acid is as an ingredient in clean...voir plus
Glycolic acid, also called hydroxyacetic acid, is the smallest alpha-hydroxy acid (AHA). It is used in skin-care products as an exfoliant and moisturizer. It may reduce wrinkles, and acne scarring. A major use of glycolic acid is as an ingredient in cleaning solutions, rust removal and degreasing. It is also used in the textile industry as a dyeing and tanning agent, in adhesives, and in emulsion polymers. Glycolic acid is environmentally friendly, biodegradable, compatible with many cleaning surfaces, and compatible with many other ingredients. voir moins
Compliance Highlights Available
|
||
| MQ-RESIN POWDER 803 TF | Wacker Chemical Corporation - Silicones |
MQ-RESIN POWDER 803 TF is a co-hydrolysis product of tetraalkoxy silane (Q unit)and trimethyl-ethoxy silane (M unit). The chemical structure of MQ-RESIN POWDER 803 TF can be seen as a three dimensional network of polysilicic acid units which are endblocke...voir plus
MQ-RESIN POWDER 803 TF is a co-hydrolysis product of tetraalkoxy silane (Q unit)and trimethyl-ethoxy silane (M unit). The chemical structure of MQ-RESIN POWDER 803 TF can be seen as a three dimensional network of polysilicic acid units which are endblocked with trimethylsilyl groups. Some residual ethoxy and hydroxy functions are present. The average molecular weight can be exactly controlled by the ratio of M and Q units. This ratio approx. is 0.67 for MQ-RESIN POWDER 803 TF.MQ-RESIN POWDER 803 TF is a pure white powder manufactured substantially free ofvolatile impurities. It therefore only contains traces of aliphatic hydrocarbons. According to its low content of fine dust particles and its uniform spherical particle shape, MQ-RESIN POWDER 803 TF exhibits excellent rheological properties (flowability). Therefore, common powder processing techniques like bottling, conveying, and metering are simplified.MQ-RESIN POWDER 803 TF can be compounded with polydimethylsiloxanes or dissolvedin appropriate solvents like aromatic and non-aromatic hydrocarbons or lower alcohols. The solubility of WACKER® MQ 803 TF is excellent. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| Netthon CG | Netchem |
|
Netthon CG is a preservative mixture isothiazolinones. It is used in personal care products such as shampoos, conditioners, body washes, gels, and liquid soaps. It is effective over a wide pH range, and is compatible with numerous ingredients. It is effec...voir plus
Netthon CG is a preservative mixture isothiazolinones. It is used in personal care products such as shampoos, conditioners, body washes, gels, and liquid soaps. It is effective over a wide pH range, and is compatible with numerous ingredients. It is effective at low usage levels and does not release formaldehyde. voir moins
Compliance Highlights Available
|
|
| SILFOAM® SC 1132 | Wacker Chemical Corporation - Silicones |
SILFOAM® SC 1132 is an opaque, viscous, anhydrous compound that is effective against a wide range of surfactants.
Compliance Highlights Unavailable
|
Request Sample | |
| SILFOAM® SC 120 | Wacker Chemical Corporation - Silicones |
An anhydrous antifoam compound. Because of its low viscosity, it is easier to handle than high viscous grades. Shows a high resistance in alkaline environments. Its excellent alkali resistance renders it extremely versatile. Was conceived for the agrochem...voir plus
An anhydrous antifoam compound. Because of its low viscosity, it is easier to handle than high viscous grades. Shows a high resistance in alkaline environments. Its excellent alkali resistance renders it extremely versatile. Was conceived for the agrochemical industry, biotechnology, technical processes, washing industry, fermentation. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| SILFOAM® SC 129 | Wacker Chemical Corporation - Silicones |
SILFOAM® SC 129 is a viscous, opaque antifoam compound that is effective against a wide range of surfactants.
Compliance Highlights Unavailable
|
Request Sample | |
| SILFOAM® SC 132 | Wacker Chemical Corporation - Silicones |
SILFOAM® SC 132 is a viscous, opaque antifoam compound that is effective against a wide range of surfactants.
Compliance Highlights Unavailable
|
Request Sample | |
| SILFOAM® SD 168 | Wacker Chemical Corporation - Silicones |
SILFOAM® SD 168 is a very compatible, anhydrous antifoam agent that is easily disperable. SILFOAM® SD 168 is intended for incorporation into non-structured liquid detergents for foam control and polymer dispersions (latices) in order for deaeration.
Compliance Highlights Unavailable
|
Request Sample | |
| SILFOAM® SD 850 | Wacker Chemical Corporation - Silicones |
SILFOAM® SD 850 is an anhydrous, low-viscosity, readily dispersible and relatively alkali-resistant organomodified antifoam agent with good deaeration characteristics.
Compliance Highlights Unavailable
|
Request Sample | |
| SILFOAM® SE 21 FOOD GRADE | Wacker Chemical Corporation - Silicones |
SILFOAM® SE 21 FOOD GRADE is a 10% active emulsion designed for controlling foam in aqueous systems. Can be added to most foaming systems as is or by diluting with either water or a portion of the foaming system. In hot systems and in processes where maxi...voir plus
SILFOAM® SE 21 FOOD GRADE is a 10% active emulsion designed for controlling foam in aqueous systems. Can be added to most foaming systems as is or by diluting with either water or a portion of the foaming system. In hot systems and in processes where maximum uniformity of the dispersion is required, SILFOAM® SE 21 FOOD GRADE is best diluted with cool water before adding it to the foaming solution. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| SILFOAM® SE 24 | Wacker Chemical Corporation - Silicones |
SILFOAM® SE 24 is a 10% silicone emulsion designed for controlling foam in aqueous systems. Is recommended for highly alkaline systems where quick knockdown is desired. Can be added easily to most foaming systems as is or by diluting with either water or ...voir plus
SILFOAM® SE 24 is a 10% silicone emulsion designed for controlling foam in aqueous systems. Is recommended for highly alkaline systems where quick knockdown is desired. Can be added easily to most foaming systems as is or by diluting with either water or a portion of the foaming system. In hot systems and in processes where maximum uniformity of the dispersion is required, SILFOAM® SE 24 is best diluted with cool water before adding it to the foaming solution. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| SILFOAM® SE 33 | Wacker Chemical Corporation - Silicones |
SILFOAM® SE 33 is a 20% active, medium viscosity silicone defoamer emulsion that is designed for controlling foam in aqueous systems. SILFOAM® SE 33 is safe to be used in alkaline and high temperature applications. It provides excellent foam knockdown as ...voir plus
SILFOAM® SE 33 is a 20% active, medium viscosity silicone defoamer emulsion that is designed for controlling foam in aqueous systems. SILFOAM® SE 33 is safe to be used in alkaline and high temperature applications. It provides excellent foam knockdown as well as prevents foam reoccurrence longer than most conventional defoamers. SILFOAM® SE 33 is certified as Kosher. It is suitable for use in indirect food contact and secondary direct food additive applications listed under FDA 21 CFR176.170; 176.180; 176.200; 176.210;175.300; 177.2600; 178.3400; and 173.340. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| SILFOAM® SE 36 | Wacker Chemical Corporation - Silicones |
SILFOAM® SE 36 is an antifoam emulsion that is largely compatible with surfactants. Unlike conventional antifoam emulsions, solutions of SILFOAM® SE 36 are stable for relatively long periods. SILFOAM® SE 36 is particularly efficient at keeping cloudiness ...voir plus
SILFOAM® SE 36 is an antifoam emulsion that is largely compatible with surfactants. Unlike conventional antifoam emulsions, solutions of SILFOAM® SE 36 are stable for relatively long periods. SILFOAM® SE 36 is particularly efficient at keeping cloudiness insurfactant-containing solutions to a minimum. We recommend that preliminary trials be carried out as these systems are highly diverse. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| SILFOAM® SE 39 | Wacker Chemical Corporation - Silicones |
SILFOAM® SE 39 is a low viscous antifoam emulsion of long-lasting efficiency.
Compliance Highlights Unavailable
|
Request Sample | |
| SILFOAM® SE 47 | Wacker Chemical Corporation - Silicones |
SILFOAM® SE 47 is a versatile antifoam that contains a comparatively high amount of emulsifier. It features a high resistance to alkalis and acids and may further be used in a wide range of areas in which pH is critical.
Compliance Highlights Unavailable
|
Request Sample | |
| SILFOAM® SP 150 | Wacker Chemical Corporation - Silicones |
The activity of SILFOAM® SP 150 is unaffected by a wide range of temperatures. SILFOAM® SP 150 has an excellent and lasting antifoam effect which is of particular advantage in laundry detergents.
Compliance Highlights Unavailable
|
Request Sample | |
| SILFOAM® SRE | Wacker Chemical Corporation - Silicones |
SILFOAM® SRE, which contains 20% active ingredients and 33% solids, is a versatile antifoam that is comparatively rich in emulsifier but is nonetheless easily metered because it has a relatively low viscosity. Since SILFOAM® SRE also possesses high resist...voir plus
SILFOAM® SRE, which contains 20% active ingredients and 33% solids, is a versatile antifoam that is comparatively rich in emulsifier but is nonetheless easily metered because it has a relatively low viscosity. Since SILFOAM® SRE also possesses high resistance to alkalis and acids it may further be used in a wide range of applications in which pH is critical. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| SIPELL® RE 55 M | Wacker Chemical Corporation - Silicones |
SIPELL® RE 55 M is a solvent-free silicone-based water repellent with incorporated catalyst.
Compliance Highlights Unavailable
|
Request Sample | |
| Sodium Benzoate, Granular | Netchem |
|
Sodium benzoate is a preservative added to some foods and personal care products to prolong shelf life. Sodium benzoate is considered Generally Recognized As Safe (GRAS) by the FDA and as a result is used as a preservative in foods. It is particularly eff...voir plus
Sodium benzoate is a preservative added to some foods and personal care products to prolong shelf life. Sodium benzoate is considered Generally Recognized As Safe (GRAS) by the FDA and as a result is used as a preservative in foods. It is particularly effective in acidic foods such as soda, pickles, jelly, salad dressing, and condiments. In personal care products, it is commonly found in hair products, baby wipes, toothpaste, and mouthwash. It is also used in some over-the-counter medications like cough syrup. voir moins
Compliance Highlights Available
|
|
| Triclosan, USP | Netchem |
|
Triclosan is an antibacterial and antifungal agent used in toothpaste, soaps, detergents, toys, and surgical cleaning treatments. Triclosan acts as a preservative, helps to prevent odours, can kill or remove bacteria, and stops the growth of bacteria, fun...voir plus
Triclosan is an antibacterial and antifungal agent used in toothpaste, soaps, detergents, toys, and surgical cleaning treatments. Triclosan acts as a preservative, helps to prevent odours, can kill or remove bacteria, and stops the growth of bacteria, fungus and mildew. Application of the material will be determined by the regions regulations. As of 2020, in Canada the maximum amount of triclosan allowed is 0.03% in mouthwashes, 1.0% in non-prescription drugs, and 0.3% in cosmetics and natural health products. voir moins
Compliance Highlights Available
|
|
| VINNAPAS® 192 | Wacker Chemical Corporation - Silicones |
VINNAPAS® 192 is a self crosslinking, plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate and ethylene for the Nonwovens market. It is ideally used in absorbent hygiene products, air filters, baby wipes, cleansing wipes, ...voir plus
VINNAPAS® 192 is a self crosslinking, plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate and ethylene for the Nonwovens market. It is ideally used in absorbent hygiene products, air filters, baby wipes, cleansing wipes, tableware and toilet paper. This product has a pH value of 4.5-6.0, a viscosity (dynamic at 23.0°C), and a solid constituent of 51.0-53.0%. voir moins
Compliance Highlights Available
|
Request Sample | |
| VINNAPAS® 400 H | Wacker Chemical Corporation - Silicones |
VINNAPAS® 400 H is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of 0 °C. It was developed as a higher viscosity, high-performance dispersion offering a superior balance of adhesive/c...voir plus
VINNAPAS® 400 H is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of 0 °C. It was developed as a higher viscosity, high-performance dispersion offering a superior balance of adhesive/cohesive properties useful in achieving much higher formulation viscosities. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| VINNAPAS® DP 600 | Wacker Chemical Corporation - Silicones |
VINNAPAS® DP 600 is an aqueous, plasticizer-free polymer dispersion produced from vinyl acetate monomer.
Compliance Highlights Unavailable
|
Request Sample | |
| VINNAPAS® EN 1020 | Wacker Chemical Corporation - Silicones |
VINNAPAS® EN 1020 is a self crosslinking, plasticizer-free, aqueous polymer dispersion that is produced from the monomers vinyl acetate and ethylene. It is ideally used in tableware, absorbent hygiene products, and toilet paper. This product has a solid c...voir plus
VINNAPAS® EN 1020 is a self crosslinking, plasticizer-free, aqueous polymer dispersion that is produced from the monomers vinyl acetate and ethylene. It is ideally used in tableware, absorbent hygiene products, and toilet paper. This product has a solid constituent of 49.0-51.0%, a viscosity (dynamic at 23.0°C) of 50.0 - 650.0 mPa.s, and a pH value of 3.0-4.0. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| VINNAPAS® EN 1024 | Wacker Chemical Corporation - Silicones |
VINNAPAS® EN 1024 is a self crosslinking, plasticizer-free, aqueous polymer dispersion that is produced from the monomers vinyl acetate and ethylene. It is ideally used in air filtration, absorbent hygiene products, medical drapes, and tableware. This pro...voir plus
VINNAPAS® EN 1024 is a self crosslinking, plasticizer-free, aqueous polymer dispersion that is produced from the monomers vinyl acetate and ethylene. It is ideally used in air filtration, absorbent hygiene products, medical drapes, and tableware. This product has a pH level of 4.0-5.0, a viscosity (dynamic at 23.0°C) of 100.0 - 600.0 mPa.s, and a solid constituent of 52.0-54.0%. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| VINNAPAS® EN 1028 | Wacker Chemical Corporation - Silicones |
VINNAPAS® EN 1028 is a self crosslinking, plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate and ethylene.
Compliance Highlights Unavailable
|
Request Sample | |
| VINNAPAS® EN 1267 | Wacker Chemical Corporation - Silicones |
VINNAPAS® EN 1267 is an aqueous, APE- free, self crosslinking copolymer dispersion of vinyl acetate and ethylene, that is particularly suited as a soft binder for nonwoven applications requiring wet tensile strength performance. It is ideally used in air ...voir plus
VINNAPAS® EN 1267 is an aqueous, APE- free, self crosslinking copolymer dispersion of vinyl acetate and ethylene, that is particularly suited as a soft binder for nonwoven applications requiring wet tensile strength performance. It is ideally used in air filters, absorbent hygiene products, medical drapes, moist towelettes and tableware. This product has a residual monomer of < 0.1%, a solid constituent of 51.0-53.0%, a viscosity (dynamic at 25.0°C) of 50.0 - 450.0 mPa.s, and a pH value of 4.5-5.5. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| VINNAPAS® EN 428 | Wacker Chemical Corporation - Silicones |
VINNAPAS® EN 428 is a self crosslinking, plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate and ethylene.
Compliance Highlights Unavailable
|
Request Sample | |
| VINNAPAS® EP 14 | Wacker Chemical Corporation - Silicones |
VINNAPAS® EP 14 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene.
Compliance Highlights Unavailable
|
Request Sample | |
| VINNAPAS® EP 17 | Wacker Chemical Corporation - Silicones |
VINNAPAS® EP 17 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene.
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® 1035 SILICONE RELEASE AGENT | Wacker Chemical Corporation - Silicones |
WACKER® 1035 SILICONE RELEASE AGENT is a low-viscosity 50 % solution of a silicone resin.
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® AK 100 | Wacker Chemical Corporation - Silicones |
WACKER® AK 100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm²/s. Due to its chemical structure, WACKER® AK 100 has an outstanding property profile, which sets it apart from organic materials such as mineral oils.
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® AK 1000 | Wacker Chemical Corporation - Silicones |
WACKER® AK 1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1000 mm²/s. Due to its chemical structure, WACKER® AK 1000 has an outstanding property profile, which sets it apart from organic materials such as mineral oils.
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® AK 12500 SILICONE FLUID | Wacker Chemical Corporation - Silicones |
WACKER® AK 12500 SILICONE FLUID is a linear non-reactive polydimethylsiloxane with a viscosity of approx. 12 500 mm²/s. Due to its chemical structure, WACKER® AK 12500 SILICONE FLUID has an outstanding property profile which sets it apart from organic mat...voir plus
WACKER® AK 12500 SILICONE FLUID is a linear non-reactive polydimethylsiloxane with a viscosity of approx. 12 500 mm²/s. Due to its chemical structure, WACKER® AK 12500 SILICONE FLUID has an outstanding property profile which sets it apart from organic materials such as mineral oils. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® AK 200000 SILICONE FLUID | Wacker Chemical Corporation - Silicones |
WACKER® AK 200000 SILICONE FLUID is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 200 000 mm²/s. Due to its chemical structure, WACKER® AK 200000 SILICONE FLUID has an outstanding property profile which sets it apart from organic...voir plus
WACKER® AK 200000 SILICONE FLUID is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 200 000 mm²/s. Due to its chemical structure, WACKER® AK 200000 SILICONE FLUID has an outstanding property profile which sets it apart from organic materials such as mineral oils. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® AK 350 | Wacker Chemical Corporation - Silicones |
WACKER® AK 350 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 350 mm2/s. Due to its chemical structure, has an outstanding property profile, which sets it apart from organic materials since as mineral oils. It can be used as a ...voir plus
WACKER® AK 350 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 350 mm2/s. Due to its chemical structure, has an outstanding property profile, which sets it apart from organic materials since as mineral oils. It can be used as a lubricant, hydraulic fluid, antifoam agent, polish additive etc. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® E 10 SILICONE FLUID EMULSION | Wacker Chemical Corporation - Silicones |
WACKER® E 10 SILICONE FLUID EMULSION can easily be incorporated into cold-stirred formulations.
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® E 1044 SILICONE FLUID EMULSION | Wacker Chemical Corporation - Silicones |
WACKER® E 1044 SILICONE FLUID EMULSION is a nonionic oil-in-water emulsion of a high viscous polydimethylsiloxane.
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® E 1656 SILICONE FLUID EMULSION | Wacker Chemical Corporation - Silicones |
WACKER® E 1656 SILICONE FLUID EMULSION is an oil-in-water emulsion of an aminofunctional polydimethylsiloxane.
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® E 22 | Wacker Chemical Corporation - Silicones |
An O/W emulsion of a polydimethylsiloxane dispersed in water. It is readily incorporated into cold-stirred formulations. Is a special, finely dispersed formulation of a high viscous dimethylpolysiloxane in water. The emulsion is extremely stable, so that ...voir plus
An O/W emulsion of a polydimethylsiloxane dispersed in water. It is readily incorporated into cold-stirred formulations. Is a special, finely dispersed formulation of a high viscous dimethylpolysiloxane in water. The emulsion is extremely stable, so that even highly diluted ready to use solutions are indifferent to shear forces. Its wetting and spreading properties are excellent. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® E 32 SILICONE WAX EMULSION | Wacker Chemical Corporation - Silicones |
WACKER® E 32 SILICONE WAX EMULSION is a nonionic aqueous emulsion of a silicone wax which issolid at room temperature. WACKER® E 32 SILICONE WAX EMULSION can be readily incorporated into cold-stirred formulations.
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® E 37 SILICONE RESIN EMULSION | Wacker Chemical Corporation - Silicones |
WACKER® E 37 SILICONE RESIN EMULSION is a nonionic/anionic oil-in-water emulsion whose active ingredient combines the benefits of both polydimethylsiloxanes and silicone resins. WACKER® E 37 SILICONE RESIN EMULSION can be readily incorporated into cold-st...voir plus
WACKER® E 37 SILICONE RESIN EMULSION is a nonionic/anionic oil-in-water emulsion whose active ingredient combines the benefits of both polydimethylsiloxanes and silicone resins. WACKER® E 37 SILICONE RESIN EMULSION can be readily incorporated into cold-stirred formulations. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® FC 201 | Wacker Chemical Corporation - Silicones |
WACKER® FC 201 is a nonionic 60% Polysiloxan emulsion for fabricsofteners. WACKER® FC 201 is a one-component system which is cross-linking at higher temperatures. Therefore, WACKER® FC 201 protects textiles especially cotton-polyester union cloth for wrin...voir plus
WACKER® FC 201 is a nonionic 60% Polysiloxan emulsion for fabricsofteners. WACKER® FC 201 is a one-component system which is cross-linking at higher temperatures. Therefore, WACKER® FC 201 protects textiles especially cotton-polyester union cloth for wrinkles and improves handle and easy ironing properties. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® FC 204 | Wacker Chemical Corporation - Silicones |
WACKER® FC 204 is a composition containing a self-dispersing aminofunctional silicone fluid especially for fabric softeners.
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® FC 207 | Wacker Chemical Corporation - Silicones |
WACKER® FC 207 is a nonionic micro emulsion of an amino modified silicone fluid especially for fabric softeners.
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® FINISH WR 301 | Wacker Chemical Corporation - Silicones |
WACKER® FINISH WR 301 is a reactive "functional silicone fluid".
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® HC 303 | Wacker Chemical Corporation - Silicones |
WACKER® HC 303 is an extremely finely dispersed water-based silicone emulsion. The particle size is in the nanometer range. WACKER® HC 303 can be easily diluted with water or readily incorporated into cold stirred formulations.
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® L 053 SILICONE | Wacker Chemical Corporation - Silicones |
WACKER® L 053 SILICONE is a 100% polyether functional polydimethylsiloxane which is completely water soluble.
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® L 653 SILICONE FLUID | Wacker Chemical Corporation - Silicones |
WACKER® L 653 SILICONE FLUID is a non reactive aminofunctional polydimethylsiloxane. In comparison with other curable amino silicone fluids, WACKER® L 653 SILICONE FLUID exhibits an increased storage stability both as 100% fluid and in ready-to-use formul...voir plus
WACKER® L 653 SILICONE FLUID is a non reactive aminofunctional polydimethylsiloxane. In comparison with other curable amino silicone fluids, WACKER® L 653 SILICONE FLUID exhibits an increased storage stability both as 100% fluid and in ready-to-use formulations. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® L 654 SILICONE FLUID | Wacker Chemical Corporation - Silicones |
WACKER® L 654 SILICONE FLUID is a solvent-based system containing a reactive polydimethylsiloxane as well as an aminofunctional polydimethylsiloxane. Curing rate and film flexibility can be adapted to special demands by appropriate combination of WACKER® ...voir plus
WACKER® L 654 SILICONE FLUID is a solvent-based system containing a reactive polydimethylsiloxane as well as an aminofunctional polydimethylsiloxane. Curing rate and film flexibility can be adapted to special demands by appropriate combination of WACKER® L 654 with non reactive WACKER® L 656. Is used in paint conditioners and paint polishes in order to provide superior gloss and detergent resistance. In comparison with conventional polydimethylsiloxanes of the series WACKER® AK, aminofunctional WACKER® L 654 exhibits an excellent affinity to various substrates. Gloss and depth of color are retained for a longer period of time. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® L 655 SILICONE FLUID | Wacker Chemical Corporation - Silicones |
WACKER® L 655 SILICONE FLUID is an aminofunctional polydimethylsiloxane with crosslinking properties. In comparison with conventional polydimethylsiloxanes of the series WACKER® AK WACKER® L 655 SILICONE FLUID exhibits excellent affinity to various surfac...voir plus
WACKER® L 655 SILICONE FLUID is an aminofunctional polydimethylsiloxane with crosslinking properties. In comparison with conventional polydimethylsiloxanes of the series WACKER® AK WACKER® L 655 SILICONE FLUID exhibits excellent affinity to various surfaces. In the presence of atmospheric humidity or other reactive polish actives e. g. acid waxes. WACKER® L 655 SILICONE FLUID cross-links forming a stable insoluble polymer film which exhibits an outstanding affinity to substrates and detergent resistance. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® L 656 SILICONE FLUID | Wacker Chemical Corporation - Silicones |
WACKER® L 656 SILICONE FLUID is a non reactive aminofunctional polydimethylsiloxane. In comparison with other curable amino silicone fluids WACKER® L 656 SILICONE FLUID exhibits an increased storage stability both as 100 % fluid and in ready-to-use formu...voir plus
WACKER® L 656 SILICONE FLUID is a non reactive aminofunctional polydimethylsiloxane. In comparison with other curable amino silicone fluids WACKER® L 656 SILICONE FLUID exhibits an increased storage stability both as 100 % fluid and in ready-to-use formulations. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® NE 4720 SILICONE FLUID EMULSION | Wacker Chemical Corporation - Silicones |
WACKER® NE 4720 SILICONE FLUID EMULSION is an anionic oil-in-water-emulsion of a medium viscosity polydimethylsiloxane.
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® TPR SILICONE RELEASE AGENT | Wacker Chemical Corporation - Silicones |
WACKER® TPR SILICONE RELEASE AGENT is a reaction product of silicone resin with silicone fluids which forms water-repellent release films. These films have much better affinity than is attainable with polydimethylsiloxanes and many organomodified silicone...voir plus
WACKER® TPR SILICONE RELEASE AGENT is a reaction product of silicone resin with silicone fluids which forms water-repellent release films. These films have much better affinity than is attainable with polydimethylsiloxanes and many organomodified silicone fluids of comparable viscosity. voir moins
Compliance Highlights Unavailable
|
Request Sample | |
| WACKER® W 23 SILICONE WAX | Wacker Chemical Corporation - Silicones |
WACKER® W 23 SILICONE WAX is a white, waxy polymethylsiloxane that is resistant to hydrolysis and exhibits a very high affinity to various substrates.
Compliance Highlights Unavailable
|
Request Sample | |
| Zinc Pyrithione 50% | Netchem |
|
Zinc pyrithione is an antibacterial and antifungal. It is incorporated in personal care cleansers for the treatment of dandruff (seborrheic dermatitis), scalp psoriasis, and acne. In a daily dandruff shampoo, 2 percent zinc pyrithione is suggested. In a ...voir plus
Zinc pyrithione is an antibacterial and antifungal. It is incorporated in personal care cleansers for the treatment of dandruff (seborrheic dermatitis), scalp psoriasis, and acne. In a daily dandruff shampoo, 2 percent zinc pyrithione is suggested. In a face wash zinc pyrithione can mitigate symptoms of seborrheic dermatitis on the face. Additionally there is evidence that zinc pyrithione soap may help alleviate acne. voir moins
Compliance Highlights Available
|
