| Polurene HR.B | S.A.P.I.C.I. SpA | Polurene HR.B is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. This product contains less than .5% TDI isocyanates. | |
| Polurene HR.B.S. | S.A.P.I.C.I. SpA | Polurene HR.B.S. is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. Polurene HR.B.S. is compatible with nitrocellulose. It contains less than .5% T...voir plus Polurene HR.B.S. is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. Polurene HR.B.S. is compatible with nitrocellulose. It contains less than .5% TDI isocyanates. voir moins | |
| Polurene IR 51 AB | S.A.P.I.C.I. SpA | Polurene IR 51 AB is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. This product contains less than .5% TDI isocyanates. | |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| Polurene IR 51 K | S.A.P.I.C.I. SpA | Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product prime...voir plus Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product primer or overprint varnishes. voir moins | |
| Polurene KC | S.A.P.I.C.I. SpA | Polurene KC is a mixed isocyanurate. This product sands well, either by hand or with sanding machines. It dries quickly with good elasticity. Polurene KC can be used in polyurethane sealers and matt topcoats. In particular, use of this product can imp...voir plus Polurene KC is a mixed isocyanurate. This product sands well, either by hand or with sanding machines. It dries quickly with good elasticity. Polurene KC can be used in polyurethane sealers and matt topcoats. In particular, use of this product can improve between-layer adhesion. voir moins | |
| Polurene M 75 | S.A.P.I.C.I. SpA | Polurene M 75 is an aliphatic polyisocyanate. This product can be used in non-yellowing systems. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyester in order to create 2K paints and enamels for metal, wood ...voir plus Polurene M 75 is an aliphatic polyisocyanate. This product can be used in non-yellowing systems. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyester in order to create 2K paints and enamels for metal, wood and plastics. It contains less than .2% HDI isocyanates. voir moins | |
| Polurene MBD 2 | S.A.P.I.C.I. SpA | Polurene MBD 2 is a blocked isocyanate. This product should be used in non-yellowing 1K stoving enamels. It can be used in traditional stoving enamels in order to increase flexibility and adhesion. | |
| Polurene SB 50 AB | S.A.P.I.C.I. SpA | Polurene SB 50 AB is an isocyanurate with low free TDI content. This product has good flexibility with a long pot life. It can be used in sealers, matt and semigloss topcoats. Polurene SB 50 AB shows good solubility in aromatic solvents. It contains l...voir plus Polurene SB 50 AB is an isocyanurate with low free TDI content. This product has good flexibility with a long pot life. It can be used in sealers, matt and semigloss topcoats. Polurene SB 50 AB shows good solubility in aromatic solvents. It contains less than .5% TDI isocyanates. voir moins | |
| Polurene T 70 | S.A.P.I.C.I. SpA | Polurene T 70 is an aliphatic polyisocyanate. When diluted, this product can be used in order to improve the performance of short or long oil drying resins. It can be used in 2K polyurethane coatings with good yellowing and weather resistance. This pro...voir plus Polurene T 70 is an aliphatic polyisocyanate. When diluted, this product can be used in order to improve the performance of short or long oil drying resins. It can be used in 2K polyurethane coatings with good yellowing and weather resistance. This product contains less than .5% IPDI isocyanates. voir moins | |
| Polurgreen AD AB-01 | S.A.P.I.C.I. SpA | Polurgreen AD AB-01 is a polyurethane adduct. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols and vinyl resins. It can be used in 2K varnishes, enamels, and coatings. It is composed of less than .1% ...voir plus Polurgreen AD AB-01 is a polyurethane adduct. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols and vinyl resins. It can be used in 2K varnishes, enamels, and coatings. It is composed of less than .1% TDI isocyanates and is based in a butyl-acetate solvent. voir moins | |
| Polurgreen AD-01 | S.A.P.I.C.I. SpA | Polurgreen AD-01 is a polyurethane adduct that can be used in 2K varnishes and enamels. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic and vinyl resins. It is composed of less than .1% TDI isocyanates. Polu...voir plus Polurgreen AD-01 is a polyurethane adduct that can be used in 2K varnishes and enamels. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic and vinyl resins. It is composed of less than .1% TDI isocyanates. Polurgreen AD-01 can be used in coatings. voir moins | |
| Polurgreen ES.M | S.A.P.I.C.I. SpA | Polurgreen ES.M is an isocyanurate. This product dries quickly with good pot life and yellowing resistance. It can be used in polyurethane topcoats with high solids content. Polurgreen ES.M's high nitrocellulose facilitates good cross-linking with high...voir plus Polurgreen ES.M is an isocyanurate. This product dries quickly with good pot life and yellowing resistance. It can be used in polyurethane topcoats with high solids content. Polurgreen ES.M's high nitrocellulose facilitates good cross-linking with higher hydroxide-content resins. This product contains less than .5% TDI isocyanates and less than .1% HDI isocyanates. voir moins | |
| Polurgreen ES.P | S.A.P.I.C.I. SpA | Polurgreen ES.P is a mixed isocyanurate. This product has good yellowing resistance and good hardness. It can be used in clear or pigmented polyurethane high gloss topcoats with high solids content. Its high nitrocellulose facilitates good cross-linkin...voir plus Polurgreen ES.P is a mixed isocyanurate. This product has good yellowing resistance and good hardness. It can be used in clear or pigmented polyurethane high gloss topcoats with high solids content. Its high nitrocellulose facilitates good cross-linking with higher hydroxide-content resins. This product contains less than .5% TDI isocyanates and less than .1% HDI isocyanates. voir moins | |
| Polurgreen HR-01 | S.A.P.I.C.I. SpA | Polurgreen HR-01 is a low-monomer isocyanurate. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. It is composed of less than .1% TDI isocyanate, and is based in a butyl-acetate solvent. | |
| Polurgreen M 570 | S.A.P.I.C.I. SpA | Polurgreen M 570 is a prepolymer. This product cures quickly with good abrasion resistance and elasticity. It can be used in matt or high gloss parquet coatings. Polurgreen M 570 is particularly recommended for the formulation of low-viscosity systems ...voir plus Polurgreen M 570 is a prepolymer. This product cures quickly with good abrasion resistance and elasticity. It can be used in matt or high gloss parquet coatings. Polurgreen M 570 is particularly recommended for the formulation of low-viscosity systems with high solids content. It contains less than .5% TDI isocyanates. voir moins | |
| POLYCAT® DBU | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® DBU is a strong gel catalyst that provides snap cure at ambient temperature. | |
| POLYCAT® SA 1 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 1 is an acid-free heat activated catalyst that provides excellent back-end cure. Can provide an extended pot life. It stays liquid at low temperature. | |
| POLYCAT® SA 102 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 102 is a heat activated catalyst that provides excellent back-end cure. Can provide an extended pot life. It stays liquid at low temperature. Is has higher de-blocking temperature and longer pot life time than POLYCAT® SA 1. | |
| POLYCAT® SA 2 LE | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 2 LE is a low emission heat activated catalyst that exhibits a front end delay with rapid back end-cure. | |
| POLYCAT® SA 20 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 20 is a DBT-free low emission gelling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. | |
| POLYCAT® SA 5 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 5 is a gelling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It is recommended to use in conjunction with DABCO® BA 100 to improve pot life time. | |
| POLYCAT® SA 8 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 8 is a heat activated co-catalyst with an excellent front-end delay. | |
| RAYCORE® 9021A | Specialty Polymers, Inc. | RAYCORE® 9021A is anionic self-crosslinking polyurethane-acrylic core shell hybrid. This product is intended to provide chemical, scratch and UV protection. RAYCORE® 9021A properties allow it to adhere to several different surfaces and be formulated with...voir plus RAYCORE® 9021A is anionic self-crosslinking polyurethane-acrylic core shell hybrid. This product is intended to provide chemical, scratch and UV protection. RAYCORE® 9021A properties allow it to adhere to several different surfaces and be formulated with low VOC. The primary use for this product is to apply a thin coat to the surface and provide UV and scratch protection and water resistance. voir moins | |
| RAYCRYL® 708E | Specialty Polymers, Inc. | RAYCRYL® 708E is a clear anionic all-acrylic emulsion intended for low VOC coatings on porch and floor enamels. This product is primarily used for sealers and stains on a wide variety of surfaces and provides UV protection for outdoor woods and cement. It...voir plus RAYCRYL® 708E is a clear anionic all-acrylic emulsion intended for low VOC coatings on porch and floor enamels. This product is primarily used for sealers and stains on a wide variety of surfaces and provides UV protection for outdoor woods and cement. It has an exclusive core-shell technology that provides water resistance after it cures and hardens. voir moins | |
| RAYCRYL® 918K | Specialty Polymers, Inc. | RAYCRYL® 918K is an anionic reactive acrylic emulsion for catalyzed systems. This product has a crosslinkable chemical build up that allows it to block and resist water, along with outdoor stability. RAYCRYL® 918K has a hydroxyl utility that allows it to...voir plus RAYCRYL® 918K is an anionic reactive acrylic emulsion for catalyzed systems. This product has a crosslinkable chemical build up that allows it to block and resist water, along with outdoor stability. RAYCRYL® 918K has a hydroxyl utility that allows it to react to isocyanate and gives it chemical resistance. The primary use for this product is to be used as a topcoat and provide surfaces such as cement and wood with chemical, water and UV resistance. voir moins | |
| Razeen® LR 1170 | Jubail Chemical Industries Co. | Razeen® LR 1170 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Razeen® LR 1170 is used in the formulation of solvent-free coating...voir plus Razeen® LR 1170 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Razeen® LR 1170 is used in the formulation of solvent-free coatings. voir moins | |
| Razeen® LR 2253 | Jubail Chemical Industries Co. | Razeen® LR 2253 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic diglycidyl ether. This product is characterized by its reactivity, surface hardness, flexibility, solvent resistance, and alkali resistance. Razeen® LR 2253 is ...voir plus Razeen® LR 2253 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic diglycidyl ether. This product is characterized by its reactivity, surface hardness, flexibility, solvent resistance, and alkali resistance. Razeen® LR 2253 is used in the formulation of solvent-free coatings. voir moins | |
| Razeen® SL 2733W67 | Jubail Chemical Industries Co. | Razeen® SL 2733W67 is an emulsion of an epoxy resin based on Bisphenol A/F supplied at 67% solids content. This product is characterized by its viscosity, stability, processing properties, mechanical properties, surface penetration, and chemical resistanc...voir plus Razeen® SL 2733W67 is an emulsion of an epoxy resin based on Bisphenol A/F supplied at 67% solids content. This product is characterized by its viscosity, stability, processing properties, mechanical properties, surface penetration, and chemical resistance. Razeen® SL 2733W67 is used in water-based paints and enamels. voir moins | |
| Razeen® SR 5198 | Jubail Chemical Industries Co. | Razeen® SR 5198 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact resistance, and chemical resistance. Razeen® SR 5198 is used in the formulation for baking primers and enamels ...voir plus Razeen® SR 5198 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact resistance, and chemical resistance. Razeen® SR 5198 is used in the formulation for baking primers and enamels as well as cold-curing coatings. voir moins | |
| Razeen® SR 5199 | Jubail Chemical Industries Co. | Razeen® SR 5199 is a high molecular weight, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact strength, and chemical resistance. Razeen® SR 5199 is used in the formulation of heat-curing primers and enam...voir plus Razeen® SR 5199 is a high molecular weight, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact strength, and chemical resistance. Razeen® SR 5199 is used in the formulation of heat-curing primers and enamels as well as anti-corrosive paints. voir moins | |
| RC125 | Tianyi Chemical Engineering Material Co., Ltd. | RC125, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal tar...voir plus RC125, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal tars, esters and turpentine oil, and is insoluble in alcoholic solvents. It is resistant to yellowing and heat. voir moins | |
| RC125B | Tianyi Chemical Engineering Material Co., Ltd. | RC125B, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal ta...voir plus RC125B, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal tars, esters and turpentine oil, and is insoluble in alcoholic solvents. It is resistant to yellowing and heat. voir moins | |
| RC130 | Tianyi Chemical Engineering Material Co., Ltd. | RC130, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal tar...voir plus RC130, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal tars, esters and turpentine oil, and is insoluble in alcoholic solvents. It is resistant to yellowing and heat. voir moins | |
| RC130A | Tianyi Chemical Engineering Material Co., Ltd. | RC130A, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal ta...voir plus RC130A, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal tars, esters and turpentine oil, and is insoluble in alcoholic solvents. It is resistant to yellowing and heat. voir moins | |
| RC130B | Tianyi Chemical Engineering Material Co., Ltd. | RC130B, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal ta...voir plus RC130B, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal tars, esters and turpentine oil, and is insoluble in alcoholic solvents. It is resistant to yellowing and heat. voir moins | |
| Reactol™ 5145 A | Lawter | Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be ...voir plus Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be an adhesion promoter in hard resin systems. It is used in flexo and gravure alcohol-based inks and in aqueous inks, overprint varnishes and coatings. voir moins | |
| Red 101 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Red 101 is a red iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 5-7. It finds ...voir plus Red 101 is a red iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 5-7. It finds application in various types of coatings. voir moins | |
| Red 110 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Red 110 is a red iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 5-7. It finds ...voir plus Red 110 is a red iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 5-7. It finds application in various types of coatings. voir moins | |
| Red 120 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Red 120 is a red iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 5-7. It finds ...voir plus Red 120 is a red iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 5-7. It finds application in various types of coatings. voir moins | |
| Red 130 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Red 130 is a red iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 5-7. It finds ...voir plus Red 130 is a red iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 5-7. It finds application in various types of coatings. voir moins | |
| Red 190 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Red 190 is a red iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 5-7. It finds ...voir plus Red 190 is a red iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 5-7. It finds application in various types of coatings. voir moins | |
| Resiflow® L | Estron Chemical, Inc. | Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve fl...voir plus Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve flow and leveling (orange peel), and improve the flexibility of coatings. This can be easily achieved by thoroughly mixing Resiflow® L with the other paint ingredients. Resiflow® L has compatibility with all coating resins and can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. voir moins | |
| Resiflow® L-210 | Estron Chemical, Inc. | Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and c...voir plus Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. voir moins | |
| Resiflow® L-37 | Estron Chemical, Inc. | Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and...voir plus Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and is especially effective in urethane acrylates, epoxy acrylates, polyesters, and epoxies. Recommended level of usage is 0.1%-0.5% based on solids. Resiflow® L-37 can be cut in various reactive diluents, aromatic and aliphatic hydrocarbons, esters, ketones, or alcohols for easy incorporation into the formula. voir moins | |
| Resiflow® L-45D | Estron Chemical, Inc. | Resiflow® L-45D is an acrylic polymer solution used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it can eliminate air entrapment, correct surface imperfections such as pinholes, craters, and or...voir plus Resiflow® L-45D is an acrylic polymer solution used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it can eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel. Resiflow® L-45D can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. voir moins | |
| Resiflow® L-64F | Estron Chemical, Inc. | Resiflow® L-64F is a carboxyl functional, viscous acrylic flow control agent that can be used in high solids, solvent borne, UV curable, and other paint systems. Resiflow® L-64F can act as an air release agent, reduce or eliminate surface defects such as ...voir plus Resiflow® L-64F is a carboxyl functional, viscous acrylic flow control agent that can be used in high solids, solvent borne, UV curable, and other paint systems. Resiflow® L-64F can act as an air release agent, reduce or eliminate surface defects such as craters, pinholes and fisheyes, as well as improve flow and leveling. The recommended dosage of Resiflow® L-64F is 0.2-1.5% based on binder solids. voir moins | |
| Resiflow® L-67 | Estron Chemical, Inc. | Resiflow® L-67 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems for elimination of entrapped air and surface imperfections such as pinholes and craters. As a flow control agent, Resiflow® L-67 will improve flow and lev...voir plus Resiflow® L-67 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems for elimination of entrapped air and surface imperfections such as pinholes and craters. As a flow control agent, Resiflow® L-67 will improve flow and leveling (orange peel) and can improve the flexibility of coatings. Resiflow® L-67 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems, as the product has compatibility with all coating resins. voir moins | |
| Resiflow® L5 | Estron Chemical, Inc. | Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel,...voir plus Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel, and can improve the flexibility of coatings. Resiflow®L-5 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. voir moins | |
| Resiflow® LF | Estron Chemical, Inc. | Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow...voir plus Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow® LF can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. voir moins | |
| Resiflow® LG-99 | Estron Chemical, Inc. | Resiflow® LG-99 is a non-silicone, flow, leveling and wetting additive for UV and solvent-based inks and coatings. Typical dosage is 0.1-3.0% based on total formula. Resiflow® LG-99 can also be used in UV free radical, cationic cure systems, solvent-based...voir plus Resiflow® LG-99 is a non-silicone, flow, leveling and wetting additive for UV and solvent-based inks and coatings. Typical dosage is 0.1-3.0% based on total formula. Resiflow® LG-99 can also be used in UV free radical, cationic cure systems, solvent-based acrylics, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. voir moins | |
| Resiflow® LV | Estron Chemical, Inc. | Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as...voir plus Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® LV has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. voir moins | |
| Resiflow® PL-200B | Estron Chemical, Inc. | Resiflow® PL-200B is a standard type flow control agent which can impart excellent re-coatability and intercoat adhesion properties in addition to good flow and leveling. Resiflow® PL-200B is widely used and known for its suitability and reliable performa...voir plus Resiflow® PL-200B is a standard type flow control agent which can impart excellent re-coatability and intercoat adhesion properties in addition to good flow and leveling. Resiflow® PL-200B is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and Epoxies. voir moins | |
| Resinate® A2551-100 Polyol for Solventless 2k Adhesives | Resinate Materials Group, Inc. | Resinate® A2551-100 is a developmental polyester polyol made with 99.9% recycled and renewable content. It is ideal for solventless 2k or moisture cure adhesive applications where superior adhesion performance on plastic and metal substrates is required. ...voir plus Resinate® A2551-100 is a developmental polyester polyol made with 99.9% recycled and renewable content. It is ideal for solventless 2k or moisture cure adhesive applications where superior adhesion performance on plastic and metal substrates is required. Long pot life, low viscosity, excellent water and chemical resistance. voir moins | |
| Resinate® C1051-60 (BA80) Polyol for Direct to Metal Coatings | Resinate Materials Group, Inc. | Resinate® C1051-60 (BA80) is an aromatic polyester polyol made with 60% recycled and renewable content on a solids basis. This polyol is supplied at 80% solids in n-butyl acetate. Good balance of hardness and flexibility, excellent corrosion protection, ...voir plus Resinate® C1051-60 (BA80) is an aromatic polyester polyol made with 60% recycled and renewable content on a solids basis. This polyol is supplied at 80% solids in n-butyl acetate. Good balance of hardness and flexibility, excellent corrosion protection, 60% recycled and renewable content. voir moins | |
| Resinate® C1181-100 High Flexibility Modifying Polyol | Resinate Materials Group, Inc. | Resinate® C1181-100 is a developmental aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key conside...voir plus Resinate® C1181-100 is a developmental aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key considerations. Ideal balance of hardness and flexibility, good water resistance, good chemical resistance. voir moins | |
| Resinate® C1182-100 Mid-Flexibility Modifying Polyol | Resinate Materials Group, Inc. | Resinate® C1182-100 is a developmental aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key conside...voir plus Resinate® C1182-100 is a developmental aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key considerations. Good mechanical properties with flexibility in polyurethane products, good water resistance, good chemical resistance. voir moins | |
| Resinate® C2051-50 Concrete Coating Polyol | Resinate Materials Group, Inc. | Resinate® C2051-50 is a low viscosity high-performance polyester polyol for 2K polyurethane top coats. This polyol is designed for demanding flooring and concrete coating applications where a high degree of flexibility and hardness with direct/indirect im...voir plus Resinate® C2051-50 is a low viscosity high-performance polyester polyol for 2K polyurethane top coats. This polyol is designed for demanding flooring and concrete coating applications where a high degree of flexibility and hardness with direct/indirect impact resistance is required. voir moins | |
| Resinate® C2441 Corrosion Control Polyol | Resinate Materials Group, Inc. | Resinate® C2441 is a reactive diluent useful as a performance blend polyol for industrial coatings. It has diol functionality, has very low color, is a flowable liquid at ambient temperature, and when blended with suitable resin systems can provide signif...voir plus Resinate® C2441 is a reactive diluent useful as a performance blend polyol for industrial coatings. It has diol functionality, has very low color, is a flowable liquid at ambient temperature, and when blended with suitable resin systems can provide significant enhancement of several critical properties for metal protection. Excellent corrosion protection, good balance of hardness and flexibility, good chemical and stain resistance, very good adhesion. voir moins | |
| Resinate® C3851-100 Low Viscosity Building Block Polyol | Resinate Materials Group, Inc. | Resinate® C3851-100 is an aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key considerations. Good...voir plus Resinate® C3851-100 is an aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key considerations. Good balance of hardness and flexibility, good water resistance, good chemical resistance. voir moins | |
| Rexin 138 | S.A.P.I.C.I. SpA | Rexin 138 is a short-oil alkyd resin. This product cures quickly because of high cross-linking capabilities. It can be used in 2K polyurethane matt topcoats. | |
| Rexin 143 | S.A.P.I.C.I. SpA | Rexin 143 is a short-oil alkyd resin. This product dries quickly with good flexibility, solvent release, and wetting properties. It can be used in pigmented sealers or topcoats. It can also be used in nitrocellulose or acid-curing systems. | |
| Rexin 143/70 AB | S.A.P.I.C.I. SpA | Rexin 143/70 AB is a short-oil alkyd resin. This product dries quickly with good flexibility, solvent release, and high wetting properties. It can be used in pigmented sealers or topcoats. It can also be used in nitrocellulose or acid-curing systems. | |
| Rexin 2039 | S.A.P.I.C.I. SpA | Rexin 2039 is a short-oil alkyd resin. This product dries quickly with good surface hardness and filing. It is designed for used in high-quality matte or high-gloss sealers and topcoats. It can be used in combination with urea and melamine resins for s...voir plus Rexin 2039 is a short-oil alkyd resin. This product dries quickly with good surface hardness and filing. It is designed for used in high-quality matte or high-gloss sealers and topcoats. It can be used in combination with urea and melamine resins for stoving enamels. This product can be used in acid-curing systems. voir moins | |
| Rexin 2268 | S.A.P.I.C.I. SpA | Rexin 2268 is a short-oil alkyd resin. This product has good hardness, yellowing resistance, and gloss. It can be used in clear or pigmented polyurethane coatings with high solids. It can also be used in enamels with high flexibility and hardness. | |
| Rexin AP 572 | S.A.P.I.C.I. SpA | Rexin AP 572 is a short-oil alkyd resin. This product has good gloss, hardness, and yellowing resistance. It can be used in clear or pigmented polyurethane coatings with high solids content. It can also be used in stoving enamels with high flexibility ...voir plus Rexin AP 572 is a short-oil alkyd resin. This product has good gloss, hardness, and yellowing resistance. It can be used in clear or pigmented polyurethane coatings with high solids content. It can also be used in stoving enamels with high flexibility and hardness. voir moins | |
| Rexin DP 328 | S.A.P.I.C.I. SpA | Rexin DP 328 is a saturated polyester resin. This product has good abrasion resistance with good filling and solvent release. It can be used in clear or pigmented 2K polyurethane coatings. This product is compatible with nitrocellulose and can be used ...voir plus Rexin DP 328 is a saturated polyester resin. This product has good abrasion resistance with good filling and solvent release. It can be used in clear or pigmented 2K polyurethane coatings. This product is compatible with nitrocellulose and can be used in combination with urea or melamine resins. voir moins | |
| Rexin DP 343 | S.A.P.I.C.I. SpA | Rexin DP 343 is a saturated polyester resin. This product dries quickly with good solvent release, flexibility, and high wetting properties. It can be used in pigmented sealers and topcoats. It can also be used in nitrocellulose or acid-curing coatings...voir plus Rexin DP 343 is a saturated polyester resin. This product dries quickly with good solvent release, flexibility, and high wetting properties. It can be used in pigmented sealers and topcoats. It can also be used in nitrocellulose or acid-curing coatings. voir moins | |
| Rexin DP 390 | S.A.P.I.C.I. SpA | Rexin DP 390 is a saturated polyester resin. This product dries quickly with good flexibility, hardness, and a long pot life. It can be used in clear or pigmented matte and high gloss 2K polyurethane sealers and top coats. | |
| Rexin DP 411 | S.A.P.I.C.I. SpA | Rexin DP 411 is a slightly branched solventless saturated polyester resin. This product has good chemical resistance, hardness, and flexibility. It can be used in 2K polyurethane parquet coatings. | |
| Rexin HG 3 | S.A.P.I.C.I. SpA | Rexin HG 3 is a short-oil alkyd resin. This product cures quickly with good yellowing resistance and body filling. It can be used in clear or white high-gloss topcoats. | |
| Rexin HG 7 | S.A.P.I.C.I. SpA | Rexin HG 7 is a short-oil alkyd resin. This product has good yellowing resistance, levelling, and body filling properties. It can be used in top-quality high-gloss coatings. | |
| Rexin HS 0685 AB | S.A.P.I.C.I. SpA | Rexin HS 0685 AB is a short-oil alkyd resin. This product has good solvent release, good hardness, and a long pot life. It can be used in matt, clear, or pigmented polyurethane topcoats with high solids formulations. | |
| Rexin HS 129 | S.A.P.I.C.I. SpA | Rexin HS 129 is a short-oil alkyd resin. This product dries quickly with good solvent release. If used alone, it can improve the surface hardness and leveling of matte topcoats. If used in combination with flexible resins, it can improve the sandabilit...voir plus Rexin HS 129 is a short-oil alkyd resin. This product dries quickly with good solvent release. If used alone, it can improve the surface hardness and leveling of matte topcoats. If used in combination with flexible resins, it can improve the sandability of sealers. voir moins | |
| Rexin HS 129/70 AB | S.A.P.I.C.I. SpA | Rexin HS 129/70 AB is a short-oil alkyd resin. This product dries quickly with good solvent release. If used alone, it can improve the surface hardness and leveling of matte topcoats. In combination with flexible resins, it can improve the sandability ...voir plus Rexin HS 129/70 AB is a short-oil alkyd resin. This product dries quickly with good solvent release. If used alone, it can improve the surface hardness and leveling of matte topcoats. In combination with flexible resins, it can improve the sandability of sealers. voir moins | |
| Rexin HSP 05100 | S.A.P.I.C.I. SpA | Rexin HSP 05100 is a saturated polyester resin. This product has good abrasion and chemical resistance and good hardness and levelling. It can be used in high-gloss clear or pigmented 2K polyurethane coatings, especially those formulations with high sol...voir plus Rexin HSP 05100 is a saturated polyester resin. This product has good abrasion and chemical resistance and good hardness and levelling. It can be used in high-gloss clear or pigmented 2K polyurethane coatings, especially those formulations with high solids content. voir moins | |
| Rexin K 1939 | S.A.P.I.C.I. SpA | Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...voir plus Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. voir moins | |
| Rexin LS 124 | S.A.P.I.C.I. SpA | Rexin LS 124 is a low-viscosity short-oil alkyd resin. This product has good elasticity, adhesion and pigment wettability. It can be used in pigmented polyurethane sealers and topcoats. This product also creates an abrasion-resistant coating. | |
| RGM128 | Guangxi Zhongchang Resin Co., Ltd. | RGM128 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters i...voir plus RGM128 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 125-131ºC. voir moins | |
| RGM128W | Guangxi Zhongchang Resin Co., Ltd. | RGM128W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters ...voir plus RGM128W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 125-131ºC. voir moins | |
| RGM135 | Guangxi Zhongchang Resin Co., Ltd. | RGM135 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters i...voir plus RGM135 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 131-138ºC. voir moins | |
| RGM135W | Guangxi Zhongchang Resin Co., Ltd. | RGM135W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters ...voir plus RGM135W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 131-138ºC. voir moins | |
| RHEOVIS® PU 1341 | BASF Formulation Additives | RHEOVIS® PU 1341 is an excellent low VOC high-shear thickener with low odor, and imparts excellent flow. | |
| RHEOVIS® VP 1231 | BASF Formulation Additives | RHEOVIS® VP 1231 is a modified vinylpyrrolidone-vinylacetate copolymer thickener with maximum thickening effect at a pH of about 5; can be used as protective colloid in the production of dispersions. | |
| RL10 | Guangxi Zhongchang Resin Co., Ltd. | RL10 is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 25 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a pr...voir plus RL10 is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 25 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a premium rosin ester is required. It can also be applied to sealants and coatings. voir moins | |
| RL10W | Guangxi Zhongchang Resin Co., Ltd. | RL10W is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 20 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a p...voir plus RL10W is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 20 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a premium rosin ester is required. It can also be applied to sealants and coatings. voir moins | |
| Rosin Modified Phenolic Resin - 2112 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It ...voir plus Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. voir moins | |
| Rosin Modified Phenolic Resin - 2116 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble i...voir plus Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. voir moins | |
| Rosin Modified Phenolic Resin - 2118 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble i...voir plus Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. voir moins | |
| Rosin Pentaerythrite Ester - 145 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Pentaerythrite Ester - 145 is the produce of esterification of rosin with pentaerythrite. This product dissolves in ester ,ketone and aromatic hydrocarbon and mixes well with polymers. It is used to increase initial adhesive strength of various kind...voir plus Rosin Pentaerythrite Ester - 145 is the produce of esterification of rosin with pentaerythrite. This product dissolves in ester ,ketone and aromatic hydrocarbon and mixes well with polymers. It is used to increase initial adhesive strength of various kinds of adhesive. voir moins | |
| Rovene® 4180 | Mallard Creek Polymers, Inc. | Rovene® 4180 is a styrene-butadiene emulsion. It is a low VOC latex that provides the ability to compound at high solids and in multiple application areas. It is recommended for use in automobile underbody and protective coatings, landscaping mulch coatin...voir plus Rovene® 4180 is a styrene-butadiene emulsion. It is a low VOC latex that provides the ability to compound at high solids and in multiple application areas. It is recommended for use in automobile underbody and protective coatings, landscaping mulch coatings, paper saturation, laminations, water resistance coatings, and specialty nonwoven/ textile applications. voir moins | |
| Rovene® 4546 | Mallard Creek Polymers, Inc. | Rovene® 4546 is a general purpose latex binder of medium to high stiffness. It dries to form a flexible, tough film of high water resistance. This product can be compounded with fillers and other additives to form coatings for a variety of applications. R...voir plus Rovene® 4546 is a general purpose latex binder of medium to high stiffness. It dries to form a flexible, tough film of high water resistance. This product can be compounded with fillers and other additives to form coatings for a variety of applications. Rovene® 4546 cured films are tough and pliable with excellent water resistance. voir moins | |
| Rovene® 4560 | Mallard Creek Polymers, Inc. | Rovene 4560 is a general purpose latex binder of low stiffness. It dries to form a soft but tough film. Rovene 4560 can be compounded with fillers and other additives for a variety of applications requiring flexibility, adhesion and excellent water resist...voir plus Rovene 4560 is a general purpose latex binder of low stiffness. It dries to form a soft but tough film. Rovene 4560 can be compounded with fillers and other additives for a variety of applications requiring flexibility, adhesion and excellent water resistance. voir moins | |
| Rovene® 6119 | Mallard Creek Polymers, Inc. | Rovene® 6119 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. It also exhibits excellent tensile strength and maintains elongation properties when compounded with ...voir plus Rovene® 6119 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. It also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers. voir moins | |
| Rovene® 6121 | Mallard Creek Polymers, Inc. | Rovene® 6121 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. It also exhibits excellent tensile strength and maintains elongation properties when compounded with ...voir plus Rovene® 6121 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. It also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers. voir moins | |
| Rovene® 6133 | Mallard Creek Polymers, Inc. | Rovene® 6133 is designed to work in a variety of coatings applications including interior, exterior, clear or pigmented. This polymer exhibits excellent water resistance, strength, and adhesion to multiple substrates. | |
| RPF100 | Guangxi Zhongchang Resin Co., Ltd. | RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ...voir plus RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| RPF100A | Guangxi Zhongchang Resin Co., Ltd. | RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low...voir plus RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| RPF100B | Guangxi Zhongchang Resin Co., Ltd. | RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low...voir plus RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| RPF100W | Guangxi Zhongchang Resin Co., Ltd. | RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ...voir plus RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins |
