| CHS-Alkyd S 471 WX 55 | Spolchemie | CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is...voir plus CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is primarily used for producing priming paints, enamels and quick drying coatings and lacquers. voir moins | |
| CHS-Alkyd S 491 W 55 | Spolchemie | CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W ...voir plus CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W 55 is primarily used for manufacture in primer coatings for metal surfaces. voir moins | |
| CHS-Alkyd S 622 N 60 | Spolchemie | CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic ...voir plus CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic content is just under one percent. This product is primarily used for air-drying coatings, enamels, lacquers and wood stains for exteriors and interiors. voir moins | |
| CHS-Alkyd Trim 551 W 85 | Spolchemie | CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primar...voir plus CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primary use for this product is for fast drying protective metal and wood coatings that have high hardness with hard lacquers, anticorrosive paints and varnishes. voir moins | |
| CHS-Alkyd TU 341 X 60 | Spolchemie | CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for...voir plus CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be 34%. CHS-Alkyd TU 341 X 60 is primarily used as a high performance anti-corrosion primer, paints and coatings; that has improved weather resistance on iron and light metal surfaces. voir moins | |
| CHS-Epoxy 112 | Spolchemie | CHS-Epoxy 112 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 4 solid epoxy resin with epoxide equivalent weight (EEW) range between 900-1050 g/mol. This product is primarily used for manufacture of epoxy esters, ...voir plus CHS-Epoxy 112 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 4 solid epoxy resin with epoxide equivalent weight (EEW) range between 900-1050 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. voir moins | |
| CHS-Epoxy 121 | Spolchemie | CHS-Epoxy 121 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 3.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 800-900 g/mol. This product is primarily used for manufacture of epoxy esters,...voir plus CHS-Epoxy 121 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 3.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 800-900 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution voir moins | |
| CHS-Epoxy 130 | Spolchemie | CHS-Epoxy 130 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 3 solid epoxy resin with epoxide equivalent weight (EEW) range between 700-800 g/mol. This product is primarily used for manufacture of epoxy esters, p...voir plus CHS-Epoxy 130 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 3 solid epoxy resin with epoxide equivalent weight (EEW) range between 700-800 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. voir moins | |
| CHS-Epoxy 141 | Spolchemie | CHS-Epoxy 141 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 2.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 650-700 g/mol. This product is primarily used for manufacture of epoxy esters, po...voir plus CHS-Epoxy 141 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 2.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 650-700 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. voir moins | |
| CHS-Epoxy 160 | Spolchemie | CHS-Epoxy 160 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 2 solid epoxy resin with epoxide equivalent weight (EEW) range between 600-650 g/mol. This product is primarily used for manufacture of epoxy esters, powd...voir plus CHS-Epoxy 160 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 2 solid epoxy resin with epoxide equivalent weight (EEW) range between 600-650 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. voir moins | |
| CHS-Epoxy 171 | Spolchemie | CHS-Epoxy 171 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 1.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 550-600 g/mol. This product is primarily used for manufacture of epoxy esters, po...voir plus CHS-Epoxy 171 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 1.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 550-600 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. voir moins | |
| Disvaket-100 | D.S.V. Chemicals Pvt. Ltd. | Disvaket-100 is a ketonic resin. This product has a melting point range of 85-95 degrees Celsius. It can be used in flexo and gravure inks for polypropylene and BOPP, as well as in nitrocellulose lacquers and paper varnishes. | |
| Disvaket-200 | D.S.V. Chemicals Pvt. Ltd. | Disvaket-200 is a ketonic resin. This product's melting point range is 105-115 degrees Celsius. It can be used in ballpoint inks and in wood lacquers. | |
| Disvimol-102 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-102 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and compatible with nitrocellulose substrates. It can be used in nitrocellulose lacquers and putty, in vinyl lacquers, and in flexographic inks. | |
| Disvipol-251 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-251 is a phenolic resin with high purity. This product is soluble in Novolac. It can be used in flexogravure inks, spirit varnishes, aniline inks, anti-corrosion lacquers, and traffic paints. | |
| E. GLYCOL ETHER EB | Brenntag North America | E. GLYCOL ETHER EB (Ethylene glycol butyl ether) is a colourless liquid with a mild odour. It has a high dilution ratio with petroleum hydrocarbons. It is soluble in alcohol and water. It is ideal for use in a variety of solvents, varnishes and coatings. | Request Sample |
| Estergum-751 | D.S.V. Chemicals Pvt. Ltd. | Estergum-751 is an esterified rosin derivative. This product derives from penta polyols. It can be used in primers, undercoats, adhesives, and nitrocellulose lacquers. | |
| Filtrez™ 3320 A | Lawter | Filtrez™ 3320 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Filtrez™ 3320 A is considered suitable for use in gravure and flexographic inks and coatings. | |
| Filtrez™ 339 A | Lawter | Filtrez™ 339 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Benefits of using the resin include higher gloss, adhesion and hardness. Filtrez™ 339 A is used in flexographic and gravure i...voir plus Filtrez™ 339 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Benefits of using the resin include higher gloss, adhesion and hardness. Filtrez™ 339 A is used in flexographic and gravure inks and coatings. voir moins | |
| Flex-rez™ 1074CS A | Lawter | Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The pr...voir plus Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The product is used in gravure and flexographic inks, overprint varnishes and cold seal release lacquers. voir moins | |
| Flex-Rez™ 1084AS A | Lawter | Flex-Rez™ 1084AS A is a polyamide resin that is alcohol soluble, is non-film forming and has the advantage of displaying a high melting point. It also has high heat, grease and gel resistance properties and is a fast solvent release. Flex-Rez™ 1084AS A is...voir plus Flex-Rez™ 1084AS A is a polyamide resin that is alcohol soluble, is non-film forming and has the advantage of displaying a high melting point. It also has high heat, grease and gel resistance properties and is a fast solvent release. Flex-Rez™ 1084AS A is suitable for use in flexo/gravure inks for plastics and foils and in overprint varnishes and coatings. voir moins | |
| Flex-Rez™ 1155AS A | Lawter | Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is...voir plus Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is suitable for use in flexo/gravure inks for plastics and foils, in cold seal release lacquers and in coatings and overprint varnishes. voir moins | |
| Flex-Rez™ 4584AD A | Lawter | Flex-Rez™ 4584AD A is a polyamide resin with 100% solids and is compatible with phenolic and maleic resins. It has good wet pack, gel and block resistance with gloss as an added feature. Flex-Rez™ 4584AD A is used in flexo and gravure inks for plastics an...voir plus Flex-Rez™ 4584AD A is a polyamide resin with 100% solids and is compatible with phenolic and maleic resins. It has good wet pack, gel and block resistance with gloss as an added feature. Flex-Rez™ 4584AD A is used in flexo and gravure inks for plastics and foil, in cold seal release lacquers and in coatings and overprint varnishes. voir moins | |
| PAP-110 | FTC Korea Co.,Ltd | PAP-110 has excellent adhesion and weatherability (non-yellowing) properties. It also shows good chemical resistance and good solubility. It is suitable for use in metal adhesion for paint and lacquer, organic solvent-borne and water-borne paints, and tex...voir plus PAP-110 has excellent adhesion and weatherability (non-yellowing) properties. It also shows good chemical resistance and good solubility. It is suitable for use in metal adhesion for paint and lacquer, organic solvent-borne and water-borne paints, and textile fabrics. voir moins | Request Sample |
| Resiflow® L | Estron Chemical, Inc. | Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve fl...voir plus Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve flow and leveling (orange peel), and improve the flexibility of coatings. This can be easily achieved by thoroughly mixing Resiflow® L with the other paint ingredients. Resiflow® L has compatibility with all coating resins and can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. voir moins | |
| Resiflow® L-210 | Estron Chemical, Inc. | Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and c...voir plus Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. voir moins | |
| Resiflow® LF | Estron Chemical, Inc. | Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow...voir plus Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow® LF can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. voir moins | |
| Rexin K 1939 | S.A.P.I.C.I. SpA | Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...voir plus Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. voir moins | |
| WorléeKyd C 632 M | Worlée-Chemie G.m.b.H. | WorléeKyd C 632 M is a modified short oil alkyd resin for the manufacture of PVC resistant NC combination lacquers and paints. W´Kyd C 632 M is used in combination with nitrocellulose for the manufacture of PVC resistance NC-lacquers and paints. An additi...voir plus WorléeKyd C 632 M is a modified short oil alkyd resin for the manufacture of PVC resistant NC combination lacquers and paints. W´Kyd C 632 M is used in combination with nitrocellulose for the manufacture of PVC resistance NC-lacquers and paints. An addition of urea resin and acid catalyst is not necessary. voir moins | |
| WorléeKyd C 641 | Worlée-Chemie G.m.b.H. | WorléeKyd C 641 is an extremely low viscous, alkyd resin used with nitrocellulose for clear and pigmented nitrocellulose lacquers, and acid curing coatings for wood, foil, and paper. This grade has a non-volatile content of 70% ± 1. It exhibits very quick...voir plus WorléeKyd C 641 is an extremely low viscous, alkyd resin used with nitrocellulose for clear and pigmented nitrocellulose lacquers, and acid curing coatings for wood, foil, and paper. This grade has a non-volatile content of 70% ± 1. It exhibits very quick solvent release, good recoatability at any time and very good yellowing resistance. voir moins |
