UL Prospector

Succès!

Vous avez enregistré votre recherche avec succès
Request Sample 10 AS Wollastocoat® Nexeo Solutions 10 AS Wollastocoat® is a fine particle size wollastonite that is chemically modified for select primer systems for enhanced corrosion protection and durability. It offers formulators cost savings by replacing 50% or more of corrosion inhibitor without sac...voir plus 10 AS Wollastocoat® is a fine particle size wollastonite that is chemically modified for select primer systems for enhanced corrosion protection and durability. It offers formulators cost savings by replacing 50% or more of corrosion inhibitor without sacrificing performance. voir moins
Request Sample 10 ES Wollastocoat® Nexeo Solutions 10 ES Wollastocoat® is a fine particle size wollastonite that is chemically modified for select primer systems for enhanced corrosion protection and durability. It offers formulators cost savings by replacing 50% or more of corrosion inhibitor without sac...voir plus 10 ES Wollastocoat® is a fine particle size wollastonite that is chemically modified for select primer systems for enhanced corrosion protection and durability. It offers formulators cost savings by replacing 50% or more of corrosion inhibitor without sacrificing performance. voir moins
Request Sample 3M™ Ceramic Microspheres W-210 3M Advanced Materials Division 3M™ Ceramic Microspheres White Grade W-210 are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these 3M c...voir plus 3M™ Ceramic Microspheres White Grade W-210 are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-210 are typically chosen over other 3M ceramic microspheres for higher gloss formulations. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. voir moins
Request Sample 3M™ Ceramic Microspheres W-410 3M Advanced Materials Division 3M™ Ceramic Microspheres White Grade W-410 are made of high-strength alkali alumino silicate ceramic with a typical d90 of 21 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler load...voir plus 3M™ Ceramic Microspheres White Grade W-410 are made of high-strength alkali alumino silicate ceramic with a typical d90 of 21 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-410 are typically chosen over other 3M ceramic microspheres for their overall balance in properties. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. voir moins
Request Sample 3M™ Ceramic Microspheres W-610 3M Advanced Materials Division 3M™ Ceramic Microspheres White Grade W-610 are made of alkali alumino silicate ceramic and is our largest high-strength ceramic particles with a typical d90 of 32 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic m...voir plus 3M™ Ceramic Microspheres White Grade W-610 are made of alkali alumino silicate ceramic and is our largest high-strength ceramic particles with a typical d90 of 32 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-610 are typically chosen over other 3M ceramic microspheres for increased durability. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. voir moins
Request Sample 3M™ Glass Bubbles K1 3M Advanced Materials Division 3M™ Glass Bubbles K1 are hollow glass spheres with a typical density of 0.125 g/cc and an isostatic crush strength of 250 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths...voir plus 3M™ Glass Bubbles K1 are hollow glass spheres with a typical density of 0.125 g/cc and an isostatic crush strength of 250 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles K15 3M Advanced Materials Division 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....voir plus 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles K20 3M Advanced Materials Division 3M™ Glass Bubbles K20 are hollow glass spheres with a typical density of 0.20 g/cc and an isostatic crush strength of 500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....voir plus 3M™ Glass Bubbles K20 are hollow glass spheres with a typical density of 0.20 g/cc and an isostatic crush strength of 500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles K25 3M Advanced Materials Division 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....voir plus 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles K37 3M Advanced Materials Division 3M™ Glass Bubbles K37 are hollow glass spheres with a typical density of 0.37 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strength...voir plus 3M™ Glass Bubbles K37 are hollow glass spheres with a typical density of 0.37 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles K42HS 3M Advanced Materials Division 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...voir plus 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles K46 3M Advanced Materials Division 3M™ Glass Bubbles SK46 are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...voir plus 3M™ Glass Bubbles SK46 are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles S15 3M Advanced Materials Division 3M™ Glass Bubbles S15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....voir plus 3M™ Glass Bubbles S15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles S22 3M Advanced Materials Division 3M™ Glass Bubbles S22 are hollow glass spheres with a typical density of 0.22 g/cc and an isostatic crush strength of 400 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths...voir plus 3M™ Glass Bubbles S22 are hollow glass spheres with a typical density of 0.22 g/cc and an isostatic crush strength of 400 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles S28HS 3M Advanced Materials Division 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...voir plus 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles S32 3M Advanced Materials Division 3M™ Glass Bubbles S32 are hollow glass spheres with a typical density of 0.32 g/cc and an isostatic crush strength of 2,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...voir plus 3M™ Glass Bubbles S32 are hollow glass spheres with a typical density of 0.32 g/cc and an isostatic crush strength of 2,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles S35 3M Advanced Materials Division 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...voir plus 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles S38 3M Advanced Materials Division 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...voir plus 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles S38HS 3M Advanced Materials Division 3M™ Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush streng...voir plus 3M™ Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles S42XHS 3M Advanced Materials Division 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...voir plus 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles S60 3M Advanced Materials Division 3M™ Glass Bubbles S60 are hollow glass spheres with a typical density of 0.6 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strength...voir plus 3M™ Glass Bubbles S60 are hollow glass spheres with a typical density of 0.6 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles S60HS 3M Advanced Materials Division 3M™ Glass Bubbles S60HS are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 18,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...voir plus 3M™ Glass Bubbles S60HS are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 18,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles XLD3000 3M Advanced Materials Division 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush str...voir plus 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles iM16K 3M Advanced Materials Division 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...voir plus 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 3M™ Glass Bubbles iM30K 3M Advanced Materials Division 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...voir plus 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. voir moins
Request Sample 400 Wollastocoat® Nexeo Solutions 400 Wollastocoat® is a 400 mesh wollastonite that is chemically modified for improved film cohesion, corrosion and resistance to UV degradation in powder. It is an industrial and other high performance coating.
AC-67 Ark (Fogang) Chemicals Industry Co., Ltd. AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic e...voir plus AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic emulsions as well as used for filler in glass fiber surface treatments. voir moins
ADDAPT® SilStab HL+ ADDAPT Chemicals BV ADDAPT® SilStab HL+ is a solvent-free, stabilized potassium silicate solution with a hydrophobic component in water. It is added to textured masonry coatings and interior paints. This product improves scrub resistance, is non-foaming, and free of preserva...voir plus ADDAPT® SilStab HL+ is a solvent-free, stabilized potassium silicate solution with a hydrophobic component in water. It is added to textured masonry coatings and interior paints. This product improves scrub resistance, is non-foaming, and free of preservatives. voir moins
ADDAPT® SilStab L 100 ADDAPT Chemicals BV ADDAPT® SilStab L 100 is a solvent-free, stabilized potassium silicate solution in water. It is added to interior and exterior coatings as well as textured masonry coatings. This product is non-foaming, free of preservatives, and has anti-corrosion proper...voir plus ADDAPT® SilStab L 100 is a solvent-free, stabilized potassium silicate solution in water. It is added to interior and exterior coatings as well as textured masonry coatings. This product is non-foaming, free of preservatives, and has anti-corrosion properties when applied to ferrous surfaces. The high stability of ADDAPT® SilStab L 100 allows it to be added to coatings without causing coagulation, and no additional stabilizing additives are necessary. voir moins
ADDAPT® SilStab L 50 ADDAPT Chemicals BV ADDAPT® SilStab L 50 is a solvent-free, stabilized potassium silicate solution for coatings and plasters. It can be used as a primer on masonry surfaces and for anti-corrosion on ferrous metals. This product is soluble in water, non-foaming, and can be ad...voir plus ADDAPT® SilStab L 50 is a solvent-free, stabilized potassium silicate solution for coatings and plasters. It can be used as a primer on masonry surfaces and for anti-corrosion on ferrous metals. This product is soluble in water, non-foaming, and can be added to coatings without causing coagulation. voir moins
Request Sample AKTIFIT AM Hoffmann Mineral AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomer...voir plus AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomers in combination with sulfur or sulfur donor, amine or bisphenolic crosslinking systems. This product can be used whenever high tensile strength and high modulus, combined with a very low tensile and compression set, are as important as excellent processing and extrusion properties. voir moins
Request Sample AKTIFIT PF 111 Hoffmann Mineral AKTIFIT PF 111 is a calcined product, treated with alkyl silane. It is recommended for electrophoretic coatings, corrosion protection coatings, plastic primers, and interior dispersion paints.
Request Sample AKTIFIT VM Hoffmann Mineral AKTIFIT VM is an activated SILFIT Z 91 that can be used as a functional filler either on its own or combined with extenders or matting agents. The best effect is achieved in binder systems which polymerize or cure due to a radically initiated reaction.
Request Sample AKTISIL AM Hoffmann Mineral AKTISIL AM is an activated SILLITIN Z 86, produced by modifying the surface with amino functional silane. Used as a functional filler either on its own or combined with extenders or flatting agents.
Request Sample AKTISIL EM Hoffmann Mineral AKTISIL EM is an activated SILLITIN Z 86, produced by modifying the surface with 3-epoxypropyloxypropyltrimethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents.
Request Sample AKTISIL MAM Hoffmann Mineral AKTISIL MAM is an activated SILLITIN V 88, produced by modifying the surface with 3-methacryloxypropyl-trimethoxy silane. Can be used as a functional filler either on its own or combined with extenders or flatting agents.
Request Sample AKTISIL MAM-R Hoffmann Mineral AKTISIL MAM-R is an activated SILLITIN V 85, produced by modifying the surface with 3-methacryloxypropyl-trimethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents.
Request Sample AKTISIL MM Hoffmann Mineral AKTISIL MM is an activated SILLITIN Z 86, produced by modifying the surface with 3-mercaptopropyl-trimethoxy silane. Used as a functional filler either on its own or combined with other extenders or flatting agents.
Request Sample AKTISIL PF 777 Hoffmann Mineral AKTISIL PF 777 is an activated SILLITIN Z 86, produced by modifying the surface with alkyl silane. Used as a functional filler alone by itself, or in combination with rheological additives and/or flatting agents.
Request Sample AKTISIL VM 56 Hoffmann Mineral AKTISIL VM 56 is an activated SILLITIN Z 86, produced by modifying the surface with Vinyl-triethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents.
Request Sample AKTISIL VM 56 / 89 Hoffmann Mineral AKTISIL VM 56 / 89 is an activated SILLITIN Z 89, produced by modifying the surface with 3-Vinyltriethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents.
Request Sample AKTISIL WW Hoffmann Mineral AKTISIL WW is basically SILLITIN V 88 that has been modified by treatment with a special additive. Used as a matting filler alone as well as in combination with matting agents in dispersion based clear wood varnishes. Optimum effects will be obtained with...voir plus AKTISIL WW is basically SILLITIN V 88 that has been modified by treatment with a special additive. Used as a matting filler alone as well as in combination with matting agents in dispersion based clear wood varnishes. Optimum effects will be obtained with acrylic binders, which react highly sensitively to matting agents with markedly reduced water and stain resistance. voir moins
ALBACAR® 5970 Specialty Minerals ALBACAR® 5970 is a mineral additive which has a narrow particle size distribution. This product has an oil absorption of 50 and a specific gravity of 2.7. ALBACAR® 5970 is used as a filler in paints, adhesives, sealants, caulks, and plastics.
ALBACAR® 8101 Specialty Minerals ALBACAR® 8101 is a mineral additive which has a narrow particle size distribution. This product has an oil absorption of 36 and a specific gravity of 2.7. ALBACAR® 8101 is used as a filler in paints, adhesives, sealants, caulks, and plastics.
ALBAFIL® Specialty Minerals ALBAFIL® is a fine, pure precipitated calcium carbonate which has a precisely controlled particle size and a narrow distribution. This product has an average particle size of 0.7 microns and a specific gravity of 2.7. ALBAFIL® is used in paints and coatin...voir plus ALBAFIL® is a fine, pure precipitated calcium carbonate which has a precisely controlled particle size and a narrow distribution. This product has an average particle size of 0.7 microns and a specific gravity of 2.7. ALBAFIL® is used in paints and coatings. voir moins
Request Sample ATOMITE® Nexeo Solutions ATOMITE® is a premium, fine particle size, wet ground marble available in a dry form as a free flowing powder. In addition to high whiteness and closely controlled particle size, this product has been engineered to readily dispense in non-aqueous applica...voir plus ATOMITE® is a premium, fine particle size, wet ground marble available in a dry form as a free flowing powder. In addition to high whiteness and closely controlled particle size, this product has been engineered to readily dispense in non-aqueous applications. voir moins
Accowear Accoat A/S Accowear is a reinforcement that is composed of a wear-resistant layer of stainless steel that is porous. It is used in conjunction with a fluoroplastic topcoat. The topcoat provides the non-stick properties while Accowear provides the wear-resistant prop...voir plus Accowear is a reinforcement that is composed of a wear-resistant layer of stainless steel that is porous. It is used in conjunction with a fluoroplastic topcoat. The topcoat provides the non-stick properties while Accowear provides the wear-resistant properties. voir moins
Almatis BayGranite®17 ATH (Aluminum Trihydroxide) Almatis, Inc. Almatis BayGranite®17 ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina, primarily used as a flame retardant additive for most polymer systems. BayGranite® 17 is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, and is pr...voir plus Almatis BayGranite®17 ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina, primarily used as a flame retardant additive for most polymer systems. BayGranite® 17 is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, and is produced through processing of alumina-bearing feedstocks. It is a dry powder, when heated above approximately 220°C it decomposes into approximately 35% water and 65% alumina by weight. voir moins
Almatis FlameGard® ATH (Aluminum Trihydroxide) Almatis, Inc. Almatis FlameGard® ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina designed for use in polymer systems as a flame retardant and smoke suppressive additive. FlameGard is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, ...voir plus Almatis FlameGard® ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina designed for use in polymer systems as a flame retardant and smoke suppressive additive. FlameGard is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, and is produced through processing of alumina-bearing feedstocks. Although FlameGard is a dry powder, when heated above approximately 220°C it decomposes into approximately 35% water and 65% alumina by weight. voir moins
AnTec C-60 Anpeak Specialty Minerals Co., Ltd. AnTec C-60, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to improve brightness. It can be used as an extende...voir plus AnTec C-60, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to improve brightness. It can be used as an extender in paints and coatings. voir moins
AnTec C-98 Anpeak Specialty Minerals Co., Ltd. AnTec C-98, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by controlled heat treatment in order to remove crystalline-bound hydroxyl groups and in order to improve brightness. It can be used as a f...voir plus AnTec C-98, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by controlled heat treatment in order to remove crystalline-bound hydroxyl groups and in order to improve brightness. It can be used as a functional pigment extender in coatings, paints, and printing inks. voir moins
AnTec C-OP Anpeak Specialty Minerals Co., Ltd. AnTec C-OP, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to remove brightness. It can be used in flat or low...voir plus AnTec C-OP, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to remove brightness. It can be used in flat or low-sheen architectural paints. It can also serve as an ink receptacle in specialty paper applications. voir moins
AnTec MM Anpeak Specialty Minerals Co., Ltd. AnTec MM, in the form of a highly pulverized powder, is a high-reactivity metakaolin Pozzolan. This product can be used as an admixture in mortars and grouts, as well as in concrete masonry units or other cement-based products. Its specific gravity lies...voir plus AnTec MM, in the form of a highly pulverized powder, is a high-reactivity metakaolin Pozzolan. This product can be used as an admixture in mortars and grouts, as well as in concrete masonry units or other cement-based products. Its specific gravity lies between 2.5 and 2.7, and it contains less than .5% free moisture. voir moins
AnTec WE Anpeak Specialty Minerals Co., Ltd. AnTec WE, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups. It can be used as an extender for pigment applications. ...voir plus AnTec WE, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups. It can be used as an extender for pigment applications. It contains less than 0.5% free moisture at 105 degrees Celsius. voir moins
Anhydrite Provencale S.A. Anhydrite is a filler that can withstand humidity. It is finely ground and dressed natural anhydrite that is a waterless sulphate. It is often formed as an evaporation product from sea water subject to progressive concentration of the salt water solution....voir plus Anhydrite is a filler that can withstand humidity. It is finely ground and dressed natural anhydrite that is a waterless sulphate. It is often formed as an evaporation product from sea water subject to progressive concentration of the salt water solution. Anhydrite makes up the sturdy solid base of gypsum deposits and can be mined separately. It is for use in industrial paints, lacquers and adhesives. voir moins
Anti-Reflective Application Nano Alumina B8013-2 Tianjin Boyuan New Materials Co., Ltd. B8013-2 has small particle size and excellent dispersibility, making is useful for anti-reflective coatings. It can be applied on photovoltaic glass and PET. It increases transmittance by way of decreasing light reflectance.
Arbocel® 230 Interfibe Corporation Arbocel® 230 is a grey reclaimed cellulose fiber that is insoluble in water. This product improves a variety of adhesive formulations, which includes: acrlyic, butyl, epoxy, latex, or any type of solvent. Arbocel® 230 provides improved oil retention, ten...voir plus Arbocel® 230 is a grey reclaimed cellulose fiber that is insoluble in water. This product improves a variety of adhesive formulations, which includes: acrlyic, butyl, epoxy, latex, or any type of solvent. Arbocel® 230 provides improved oil retention, tensile strength, and overall formulation performance. voir moins
Arbocel® 566 Interfibe Corporation Arbocel® 566 is a white reclaimed cellulose fiber that is used as an acrylic roof coating as well as an acrylic textured paint. This product can also be used to add body and texture to coating formulas as well as a wood putty or glue. Arbocel® 566 can b...voir plus Arbocel® 566 is a white reclaimed cellulose fiber that is used as an acrylic roof coating as well as an acrylic textured paint. This product can also be used to add body and texture to coating formulas as well as a wood putty or glue. Arbocel® 566 can be used to increase tensile strength and to increase resistance to sagging. voir moins
Arbocel® 5FT Interfibe Corporation Arbocel® 5FT is a white reclaimed cellulose fiber that is insoluble in water and is primarily used as a grout and tile adhesive. This product improves both oil retention and tensile strength in formulations. Arbocel® 5FT tends to contribute to a stable ...voir plus Arbocel® 5FT is a white reclaimed cellulose fiber that is insoluble in water and is primarily used as a grout and tile adhesive. This product improves both oil retention and tensile strength in formulations. Arbocel® 5FT tends to contribute to a stable viscosity and prevents sagging. voir moins
Arbocel® FTP Interfibe Corporation Arbocel® FTP is a grey reclaimed cellulose fiber that is insoluble in water. This product has a bulk density of 98 g/l and is primarily used as an acrylic tennis court coating and as a cushion coat for other recreational surfaces. Arbocel® FTP features ...voir plus Arbocel® FTP is a grey reclaimed cellulose fiber that is insoluble in water. This product has a bulk density of 98 g/l and is primarily used as an acrylic tennis court coating and as a cushion coat for other recreational surfaces. Arbocel® FTP features the ability to reduce resin demand and improve finished coating consistency. voir moins
Arbocel® GC-66 Interfibe Corporation Arbocel® GC-66 is a grey cellulose fiber that is most often used as a gunnable (cartridge) butyl sealant. This product has a bulk density of 119g/l and provides improved oil retention, increases tensile strength, and improves performance of applicable fo...voir plus Arbocel® GC-66 is a grey cellulose fiber that is most often used as a gunnable (cartridge) butyl sealant. This product has a bulk density of 119g/l and provides improved oil retention, increases tensile strength, and improves performance of applicable formulations. voir moins
Arbocel® GCW10 Interfibe Corporation Arbocel® GCW10 is white reclaimed cellulose that is used in acrylic roof coating as well as acrylic textured paint. This product is insoluble in water and can improve all types of adhesive formulations, which includes: acrylic, butyl, epoxy, latex, or an...voir plus Arbocel® GCW10 is white reclaimed cellulose that is used in acrylic roof coating as well as acrylic textured paint. This product is insoluble in water and can improve all types of adhesive formulations, which includes: acrylic, butyl, epoxy, latex, or any type of solvent. In addition to being used as an acrylic coating and paint, Arbocel® GCW10 can also be deployed as an extruded tape product. voir moins
Arbocel® GCW90 Interfibe Corporation Arbocel® GCW90 is a white reclaimed cellulose fiber that is insoluble in water. This product is meant to enhance adhesive formulations, which include acrylic, butyl, epoxy, latex, or any type of solvent. Arbocel® GCW90 contributes to a stable viscosity...voir plus Arbocel® GCW90 is a white reclaimed cellulose fiber that is insoluble in water. This product is meant to enhance adhesive formulations, which include acrylic, butyl, epoxy, latex, or any type of solvent. Arbocel® GCW90 contributes to a stable viscosity and adds tensile strength. voir moins
Arbocel® JMC Interfibe Corporation Arbocel® JMC is a semi-coarse natural cellulose fiber that is grey in color. This product is primarily used as an asphalt roof coating or cement and can also be used as a thickener, reinforcement fiber, absorbent, or as an extender. In addition to the a...voir plus Arbocel® JMC is a semi-coarse natural cellulose fiber that is grey in color. This product is primarily used as an asphalt roof coating or cement and can also be used as a thickener, reinforcement fiber, absorbent, or as an extender. In addition to the aforementioned features and applications, this product also provides high levels of oil absorption and increases internal reinforcement in coatings. voir moins
Arbocel® JMM Interfibe Corporation Arbocel® JMM is a semi-coarse natural cellulose fiber that grey in color. This product is primarily made from natural raw materials and is primarily used as an asphalt roof coating. As an asphalt coating, Arbocel® JMM provides benefits such as high oil...voir plus Arbocel® JMM is a semi-coarse natural cellulose fiber that grey in color. This product is primarily made from natural raw materials and is primarily used as an asphalt roof coating. As an asphalt coating, Arbocel® JMM provides benefits such as high oil absorption and viscosity-building characteristics. This product can also be used as a thickener, extender, or filler. voir moins
Arbocel® RT Interfibe Corporation Arbocel® RT is a highly purified cellulose fiber that is light brown in color. This product is primarily used as a one and two-part epoxy or as a butyl tape/caulk. Arbocel® RT possesses the capability to contribute to a stable viscosity, can increase te...voir plus Arbocel® RT is a highly purified cellulose fiber that is light brown in color. This product is primarily used as a one and two-part epoxy or as a butyl tape/caulk. Arbocel® RT possesses the capability to contribute to a stable viscosity, can increase tensile strength, and helps prevent sagging. When Arbocel® RT is added to other products it has little effect on the appearance of the final product. voir moins
Request Sample Attasorb® 5/25 LVM BASF Dispersions & Resins Attasorb® 5/25 LVM is an economical, size-controlled attapulgite absorbent used for a wide range of industrial and commercial applications. It performs well as an absorbent of either water or oils and greases. Automotive shops, industrial and machine-shop...voir plus Attasorb® 5/25 LVM is an economical, size-controlled attapulgite absorbent used for a wide range of industrial and commercial applications. It performs well as an absorbent of either water or oils and greases. Automotive shops, industrial and machine-shop floors, and any other location where oil and/or grease can leak or build up are ideal locations to apply Attasorb® 5/25 LVM. In addition to absorbing oils and greases, Attasorb® 5/25 LVM absorbent can absorb water, reduce the slippery nature of spills, and be used as a consolidating material for liquids in need of disposal. voir moins
BARISTAR® 9015 Minerals Girona S.A. Baristar® 9015 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers,...voir plus Baristar® 9015 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins
Request Sample BENTONE® 34 Elementis Specialties BENTONE® 34 is an organic solventborne derivative of a special smectite designed for low to intermediate polarity organic systems.
Request Sample BENTONE® DH Elementis Specialties BENTONE® DH is a solvent-free, waterborne hectorite clay based powder for low to zero-VOC decorative coatings which provides syneresis control with improved flow. This Hectorite Clay is a cost effective replacement to HEC and Attapulgite without sacrifici...voir plus BENTONE® DH is a solvent-free, waterborne hectorite clay based powder for low to zero-VOC decorative coatings which provides syneresis control with improved flow. This Hectorite Clay is a cost effective replacement to HEC and Attapulgite without sacrificing performance . It is also crystalline silica-free; therefore, there are no Prop 65 reporting requirements. It is also compatible with a wide variety of rheological modifiers. Starting point formulations are available upon request. voir moins
Request Sample BILT-PLATES® 156 Vanderbilt Minerals, LLC BILT-PLATES® 156 is an air floated kaolin clay (hydrated aluminum silicate). It is used in coatings such as primers, alkyd flats, and latex paints. This product is good for titanium dioxide extension in coatings that do not require a high brightness exten...voir plus BILT-PLATES® 156 is an air floated kaolin clay (hydrated aluminum silicate). It is used in coatings such as primers, alkyd flats, and latex paints. This product is good for titanium dioxide extension in coatings that do not require a high brightness extender. voir moins
BLANC FIXE, Ultra Fine Grade, 198-BT, 0.7 μm Sino-American Pigment Systems, Inc. BLANC FIXE, Ultra Fine Grade, 198-BT, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It of...voir plus BLANC FIXE, Ultra Fine Grade, 198-BT, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness. voir moins
BP Heavy Kaolin Imerys Kaolin BP Heavy kaolin is a purified hydrous kaolin. This kaolin (china clay) is a fine, white powder, odourless and smooth to the touch.
BP Light Kaolin Imerys Kaolin BP Light Kaolin is a native hydrous kaolin, free from most of its impurities, dried and milled to a fine powder. This kaolin (china clay) is a light, white powder, free from gritty particles, odourless and unctuous to the touch.
BP Light Kaolin (Natural) Imerys Kaolin BP Light Kaolin (Natural) is a native hydrous kaolin, free from most of its impurities, dried and milled to a fine powder. This kaolin (china clay) is a light, white powder, free from gritty particles, odourless and unctuous to the touch.
BURGESS 2211 Burgess Pigment Company BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, a...voir plus BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins
BURGESS 30P® Burgess Pigment Company BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives...voir plus BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins
BURGESS 5178 Burgess Pigment Company BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extende...voir plus BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins
BURGESS CB Burgess Pigment Company BURGESS CB is a surface modified calcined aluminum silicate that has been designed for use in crosslinked polyethylene and polyester. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants.
BURGESS ICEBERG® Burgess Pigment Company BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opa...voir plus BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opacity, higher degree of whiteness, better tint strength, easy dispersion, and low moisture levels in moisture sensitive applications. voir moins
BURGESS ICECAP KSF Burgess Pigment Company BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely ...voir plus BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely low 325 (45 micron) mesh residue. voir moins
BURGESS ICECAP K® Burgess Pigment Company BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives...voir plus BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins
BURGESS KE Burgess Pigment Company BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender ...voir plus BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins
BURGESS NO. 10 Burgess Pigment Company BURGESS NO. 10 is a fine particle size, medium brightness hydrous kaolin clay. This product exhibits dispersion in water based, acid pH, alkyd, or solvent based coatings and inks, electrodeposition body primers, as well as EIFS.
BURGESS NO. 17 Burgess Pigment Company BURGESS NO. 17 is a fine particle size, high brightness hydrous kaolin clay used to extend TiO2 in semigloss paints and inks. This product is well ground, has excellent whiteness and dispersion, and high brightness.
BURGESS NO. 20 Burgess Pigment Company BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an...voir plus BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins
BURGESS NO. 27 Burgess Pigment Company BURGESS NO. 27 is an ultra fine particle size, medium brightness hydrous kaolin clay. This product is used as an extender in semigloss, satin, and gloss paints.
BURGESS NO. 28 Burgess Pigment Company BURGESS NO. 28 is an ultra fine particle size, higher brightness hydrous kaolin clay. This product is used to extend TiO2 while maintaining tint strength and gloss. It is used extensively in water based satin and semigloss coating systems.
BURGESS NO. 30® Burgess Pigment Company BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and ...voir plus BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins
BURGESS NO. 40 Burgess Pigment Company BURGESS NO. 40 is a median particle size, medium brightness hydrous kaolin clay. This product is an acid pH clay exhibiting excellent dispersion properties, and can be used in trade sales coatings and adhesives.
BURGESS NO. 50® Burgess Pigment Company BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings ...voir plus BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings and retention of physical properties in filled polymeric systems. voir moins
BURGESS NO. 60 Burgess Pigment Company BURGESS NO. 60 is an acid pH, fine particle size, medium brightness hydrous kaolin clay with excellent dispersion properties. This product is used in inks, adhesives and industrial finishes, electrostatic deposition body primers, and EIFS.
BURGESS NO. 97 Burgess Pigment Company BURGESS NO. 97 is an ultra fine particle size, medium brightness hydrous kaolin clay that exhibits excellent tint strength. This product is a well-ground extender of TiO2 in semigloss, satin, and gloss paints.
BURGESS NO. 98 Burgess Pigment Company BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss...voir plus BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss paints. voir moins
BURGESS OPTIPOZZ® Burgess Pigment Company BURGESS OPTIPOZZ® is a high reactivity metakaolin produced by a patented process. This product increases chemical resistance and durability, and reduces shrinkage. It can be used as an extender or filler in paints, coatings, adhesives, and sealants.
BURGESS OPTIWHITE MX® Burgess Pigment Company BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based ...voir plus BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based coatings by reducing the amount of TiO2 and lowering raw material costs while maintaining opacity, whiteness, and tint strength. voir moins
BURGESS OPTIWHITE P® Burgess Pigment Company BURGESS OPTIWHITE P® is a flash calcined clay used extensively to extend TiO2. This product exhibits GE Brightness, improves touchup, scrub, and burnish resistance. It is used in flat interior trade sales paints which do not require maximum whiteness.
BURGESS OPTIWHITE® Burgess Pigment Company BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention...voir plus BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention and hiding when embedded in coatings and polymers. It can provide excellent dispersion, high hiding, and improved film properties. voir moins
BURGESS POLYCLAY Burgess Pigment Company BURGESS POLYCLAY is a fine particle size, medium brightness hydrous kaolin clay used in inks.
BURGESS THERMOGLACE H Burgess Pigment Company BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability...voir plus BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability. voir moins