| Polwhite™ E | Imerys Kaolin | Polwhite™ E is a high quality medium particle size kaolin. This hydrous kaolin (china clay) originates from deposits in the southwest of England. | |
| Polygloss® 90 | KaMin Solutions | Polygloss® 90 is an ultra-fine particle size, high brightness kaolin, designed to provide ease of dispersion and improved gloss in both aqueous and solvent-borne coatings and inks. Polygloss® 90 specialty kaolin contributes to improved opacity through eff...voir plus Polygloss® 90 is an ultra-fine particle size, high brightness kaolin, designed to provide ease of dispersion and improved gloss in both aqueous and solvent-borne coatings and inks. Polygloss® 90 specialty kaolin contributes to improved opacity through efficient TiO2 spacing. It can be loaded to higher PVC values than standard extender pigments, without decreasing gloss and with minimal effect on viscosity. voir moins | Request Sample |
| Polyplate® HMT | KaMin Solutions | Polyplate® HMT is a high brightness, very high aspect ratio, delaminated kaolin, intended for use in water-borne coatings, adhesives, and sealants. The large, platy structure of Polyplate® HMT imparts increased hide, tinting strength, enamel holdout, crac...voir plus Polyplate® HMT is a high brightness, very high aspect ratio, delaminated kaolin, intended for use in water-borne coatings, adhesives, and sealants. The large, platy structure of Polyplate® HMT imparts increased hide, tinting strength, enamel holdout, crack resistance, and reinforcement properties in water based systems. voir moins | Request Sample |
| Polyplate® P | KaMin Solutions | Polyplate® P is a high brightness, delaminated clay intended for use in latex paints, water flexography inks, water-based adhesives or water-based systems where increased hiding, tinting strength and improved hold out are desirable. | Request Sample |
| Polyplate® P01 | KaMin Solutions | Polyplate® P01 is a milled, high brightness, large particle size delaminated kaolin, intended for use in solvent and water-borne coatings, inks, and adhesives. The high aspect ratio of the large platy particles provides improved tinting strength, enamel h...voir plus Polyplate® P01 is a milled, high brightness, large particle size delaminated kaolin, intended for use in solvent and water-borne coatings, inks, and adhesives. The high aspect ratio of the large platy particles provides improved tinting strength, enamel holdout, and crack resistance. voir moins | Request Sample |
| Poraver® | Poraver® Expanded Glass | Poraver® expanded glass is available in five standard and two special grain sizes. With this wide variety of grain sizes from 0.04 mm to 8 mm, Poraver® expanded glass granulate offers a suitable lightweight aggregate solution for every field of applicatio...voir plus Poraver® expanded glass is available in five standard and two special grain sizes. With this wide variety of grain sizes from 0.04 mm to 8 mm, Poraver® expanded glass granulate offers a suitable lightweight aggregate solution for every field of application. voir moins | |
| Precipitated Barium Sulfate | Shanghai Tengmin Industry Co., Ltd. | Precipitated Barium Sulfate is a white powdery substance that has a melting point at 1580°C and becomes a crystalline structure at 1149°C. This product is primarily used as fillers for paint, coatings and pigments. | |
| Prizmalite P2011SL | Prizmalite Industries Inc. | Prizmalite P2011SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 3 to 6 microns. Prizmalite P2011SL can be used in solvent and water-based paint applications. | |
| Prizmalite P2050SL | Prizmalite Industries Inc. | Prizmalite P2050SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 35 to 45 microns. Prizmalite P2050SL can be used in textile and vinyl coatings, solvent and water-based coating...voir plus Prizmalite P2050SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 35 to 45 microns. Prizmalite P2050SL can be used in textile and vinyl coatings, solvent and water-based coatings, and tactile coatings. voir moins | |
| Prizmalite P2075SL | Prizmalite Industries Inc. | Prizmalite P2075SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 65 to 75 microns. Prizmalite P2075SL can be used in textile and vinyl coatings, solvent and water-based coating...voir plus Prizmalite P2075SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 65 to 75 microns. Prizmalite P2075SL can be used in textile and vinyl coatings, solvent and water-based coatings, and tactile coatings. voir moins | |
| Prizmalite P2453BTA | Prizmalite Industries Inc. | Prizmalite P2453BTA are hemispherically aluminum coated barium titanate glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 40 to 50 microns. Prizmalite P2453BTA can be used in textile and vinyl coating...voir plus Prizmalite P2453BTA are hemispherically aluminum coated barium titanate glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 40 to 50 microns. Prizmalite P2453BTA can be used in textile and vinyl coatings, solvent and water-based coatings, reflective plastisol inks, tactile coatings, and reflective powder coatings. voir moins | |
| Promisil 135-LS | Industrias Promi de Occidente, S.A. de C.V | Promisil 135-LS is a precipitated amorphous silica with superior dispersion. It has a median surface area, which facilitates perfect transparency. The high dispersion benefits the mixing of rubber components, so that favors the properties of tensile stren...voir plus Promisil 135-LS is a precipitated amorphous silica with superior dispersion. It has a median surface area, which facilitates perfect transparency. The high dispersion benefits the mixing of rubber components, so that favors the properties of tensile strength, abrasion resistance and tear resistance. Applications include wire, cable coverings, sportswear, shoe soles, solves, and paint. voir moins | |
| Promisil SM | Industrias Promi de Occidente, S.A. de C.V | Promisil SM is a highly dispersed precipitated silica and higher density. It is used as reinforcing filler in the rubber industry and other compounds as anticaking powder. Applications include use in agriculture, coatings, footwear, fungicide, insecticide...voir plus Promisil SM is a highly dispersed precipitated silica and higher density. It is used as reinforcing filler in the rubber industry and other compounds as anticaking powder. Applications include use in agriculture, coatings, footwear, fungicide, insecticide, processing aid, paint, pesticide, plastics, PVC, sheet, reinforcement, salt and silicon rubber. voir moins | |
| Promisil STD | Industrias Promi de Occidente, S.A. de C.V | Promisil STD is a highly dispersed precipitated silica has an affordable price. It is used as reinforcing filler in the rubber industry and as anti-caking agent in other compounds. It also provides thixotropic properties to the mixtures. Applications incl...voir plus Promisil STD is a highly dispersed precipitated silica has an affordable price. It is used as reinforcing filler in the rubber industry and as anti-caking agent in other compounds. It also provides thixotropic properties to the mixtures. Applications include use in agriculture, coatings, footwear, fungicide, insecticide, paint, pesticides, plastics, salt and silicon rubber. voir moins | |
| PYRAX® ABB | Vanderbilt Minerals, LLC | PYRAX® ABB is a pyrophyllite (hydrated aluminum silicate) that is an economical extender pigment. It can be used in both interior and exterior architectural coatings. With a unique combination of particle morphologies, this product is a suitable functiona...voir plus PYRAX® ABB is a pyrophyllite (hydrated aluminum silicate) that is an economical extender pigment. It can be used in both interior and exterior architectural coatings. With a unique combination of particle morphologies, this product is a suitable functional alternate for specialty mica products, including mineralite micas. PYRAX® ABB also imparts mud crack resistance to high build coatings such as texture paints and block fillers. voir moins | Request Sample |
| PYRAX® B | Vanderbilt Minerals, LLC | PYRAX® B is a hydrated aluminum silicate (pyrophyllite) that is an economical extender pigment. It can be used in both interior and exterior architectural coatings. With a unique combination of particle morphologies, this product is a suitable functional ...voir plus PYRAX® B is a hydrated aluminum silicate (pyrophyllite) that is an economical extender pigment. It can be used in both interior and exterior architectural coatings. With a unique combination of particle morphologies, this product is a suitable functional alternate for specialty mica products, including mineralite micas. voir moins | Request Sample |
| Pyrogenic Silica RS-50 | Glassfillers.com (A unit of Vitrominerals Inc.) | Pyrogenic Silica RS-50 is a hydrophilic, 100% recycled synthetic, fully X-ray amorphous silica, produced by flame hydrolysis. It is a white, submicron-sized powder of great purity and a surface area of 20 to 50 m2/g. RS-50 is effective as a thixotropic r...voir plus Pyrogenic Silica RS-50 is a hydrophilic, 100% recycled synthetic, fully X-ray amorphous silica, produced by flame hydrolysis. It is a white, submicron-sized powder of great purity and a surface area of 20 to 50 m2/g. RS-50 is effective as a thixotropic rheology control and thickening agent in many polymer systems, such as unsaturated polyesters, adhesives, sealants, coatings, printing inks, etc. It can be used as active strengthening filler in silicone-elastomers and elastomers. Pyrogenic Silica RS-50 has a specific gravity of 2.2, a bulk density of 23 to 25 lb/ft3 vibrated, oil absorption of 65 g/100g, a pH of 6.0 (4% dispersion in water), a refractive index of 1.46, and a softening temperature of ~1600 °C. voir moins | |
| Q-Cel® 300 | Potters Industries Inc. | Q-Cel® 300 is a hollow, engineered glass microsphere. This product has a tamped bulk density of 0.12 g/cc and an average particle size of 90 microns. Q-Cel® 300 is most commonly used to reduce density in automotive underbody coating applications. | |
| Q-Cel® 5019 | Potters Industries Inc. | Q-Cel® 5019 is a hollow, engineered glass microsphere. This product has a tamped bulk density of 0.11 g/cc and an average particle size of 72 microns. Q-Cel® 5019 is most commonly used to reduce density in automotive underbody coating applications. | |
| Q-Cel® 5032S | Potters Industries Inc. | Q-Cel® 5032S is a hollow, engineered glass microsphere. This product has a tamped bulk density of 0.20 g/cc and an average particle size of 63 microns. Q-Cel® 5032S is most commonly used to reduce density in automotive underbody coating applications. | |
| Q-Cel® 6014 | Potters Industries Inc. | Q-Cel® 6014 is a hollow, engineered glass microsphere. This product has a tamped bulk density of 0.08 g/cc and an average particle size of 85 microns. Q-Cel® 6014 is most commonly used to reduce density in automotive underbody coating applications. | |
| Q-Cel® 6019 | Potters Industries Inc. | Q-Cel® 6019 is a hollow, engineered glass microsphere. This product has a tamped bulk density of 0.11 g/cc and an average particle size of 75 microns. Q-Cel® 6019 is most commonly used to reduce density in automotive underbody coating applications. | |
| Q-Cel® 6019S | Potters Industries Inc. | Q-Cel® 6019S is a hollow, engineered glass microsphere. This product has a tamped bulk density of 0.11 g/cc and an average particle size of 70 microns. Q-Cel® 6019S is most commonly used to reduce density in automotive underbody coating applications. | |
| Q-Cel® 6028 | Potters Industries Inc. | Q-Cel® 6028 is a hollow, engineered glass microsphere. This product has a tamped bulk density of 0.16 g/cc and an average particle size of 70 microns. Q-Cel® 6028 is most commonly used to reduce density in automotive underbody coating applications. | |
| Q-Cel® 6036 | Potters Industries Inc. | Q-Cel® 6036 is a hollow, engineered glass microsphere. This product has a tamped bulk density of 0.21 g/cc and an average particle size of 60 microns. Q-Cel® 6036 is most commonly used to reduce density in automotive underbody coating applications. | |
| Q-Cel® 6042S | Potters Industries Inc. | Q-Cel® 6042S is a hollow, engineered glass microsphere. This product has a tamped bulk density of 0.26 g/cc and an average particle size of 50 microns. Q-Cel® 6042S is most commonly used to reduce density in automotive underbody coating applications. | |
| Q-Cel® 6048 | Potters Industries Inc. | Q-Cel® 6048 is a hollow, engineered glass microsphere. This product has a tamped bulk density of 0.27 g/cc and an average particle size of 50 microns. Q-Cel® 6048 is most commonly used to reduce density in automotive underbody coating applications. | |
| Q-Cel® 7019 | Potters Industries Inc. | Q-Cel® 7019 is a hollow, engineered glass microsphere. This product has a tamped bulk density of 0.11 g/cc and an average particle size of 80 microns. Q-Cel® 7019 is most commonly used to reduce density in automotive underbody coating applications. | |
| Q-Cel® 7023S | Potters Industries Inc. | Q-Cel® 7023S is a hollow, engineered glass microsphere. This product has a tamped bulk density of 0.13 g/cc and an average particle size of 85 microns. Q-Cel® 7023S is most commonly used to reduce density in automotive underbody coating applications. | |
| Q-Cel® 7028 | Potters Industries Inc. | Q-Cel® 7028 is a hollow, engineered glass microsphere. This product has a tamped bulk density of 0.16 g/cc and an average particle size of 75 microns. Q-Cel® 7028 is most commonly used to reduce density in automotive underbody coating applications. | |
| Q-Cel® 7036 | Potters Industries Inc. | Q-Cel® 7036 is a hollow, engineered glass microsphere. This product has a tamped bulk density of 0.21 g/cc and an average particle size of 63 microns. Q-Cel® 7036 is most commonly used to reduce density in automotive underbody coating applications. | |
| Q-Cel® 7040S | Potters Industries Inc. | Q-Cel® 7040S is a hollow, engineered glass microsphere. This product has a tamped bulk density of 0.26 g/cc and an average particle size of 54 microns. Q-Cel® 7040S is most commonly used to reduce density in automotive underbody coating applications. | |
| Quartz 300 | Micronized Products | Quartz 300 is a washed, sorted, micronized, crystalline quartz ore with an oil absorption rate of 23-33%. This product is most commonly used in textured coating applications where good whiteness, high purity, fine particle size, and hardness are preferred...voir plus Quartz 300 is a washed, sorted, micronized, crystalline quartz ore with an oil absorption rate of 23-33%. This product is most commonly used in textured coating applications where good whiteness, high purity, fine particle size, and hardness are preferred properties. voir moins | |
| Quartz Sand | BassTech International | Quartz Sand is specially designed to add functionality and durability while decreasing the use of expensive resins. This product is used in paint, coatings, and inks, and works well with binders and other additives. | |
| Quarzflor® 30 | Minerals Girona S.A. | Quarzflor® 30 is a silica filler of high purity with a medium grade of brightness to be used in paints, anti-acids coatings, adhesives and rubber. It has an oil absorption DOP of 36g/100g and a top cut of 30µm. | |
| Quarzflor® 50 | Minerals Girona S.A. | Quarzflor® 50 is a silica filler of high purity with a medium grade of brightness to be used in paints, anti-acid coatings, adhesives and rubber. It has an oil absorption DOP of 28g/100g and a top cut of 50µm. | |
| Quarzflor® 80 | Minerals Girona S.A. | Quarzflor® 80 is a silica filler of high purity with a medium grade of brightness to be used in paints, anti-acid coatings, adhesives and rubber. It has an oil absorption DOP of 26g/100g and a top cut of 80µm. | |
| R-8601 Alkyl Modified Polysiloxane | Zhejiang Feidian Chemical Co., Ltd. | R-8601 Alkyl Modified Polysiloxane offers functional reactivity, good surface wetting, and low risk of precipitation. Its benefits also include comprehensive versatility, improved mechanical property of composites, and improved compatibility between inorg...voir plus R-8601 Alkyl Modified Polysiloxane offers functional reactivity, good surface wetting, and low risk of precipitation. Its benefits also include comprehensive versatility, improved mechanical property of composites, and improved compatibility between inorganic fillers and polymers. voir moins | |
| RHODOLINE® OTE 600 | Univar Solutions | RHODOLINE® OTE 600 is an ecolabel compliant APE-free, low VOC and SVOC open time extender for waterborne coating formulations, which allows for improved applicability, flow and leveling, and film appearance. | Request Sample |
| Rockforce® MS600-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS600-Roxul®1000 is a high quality engineered mineral fibre. Its short fibre length results in an excellent dispersion in various matrix materials e.g. resins, bitumen. Rockforce® MS600-Roxul®1000 shows added values in rheology control, reinfor...voir plus Rockforce® MS600-Roxul®1000 is a high quality engineered mineral fibre. Its short fibre length results in an excellent dispersion in various matrix materials e.g. resins, bitumen. Rockforce® MS600-Roxul®1000 shows added values in rheology control, reinforcement, dimensional stability, and heat resistance. voir moins | |
| Rockforce® MS603-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS603-Roxul®1000 is a high quality engineered mineral fibre. Its short fibre length results in an excellent dispersion in various matrix materials e.g. resins, bitumen. Rockforce® MS603-Roxul®1000 shows added values in rheology control, reinfor...voir plus Rockforce® MS603-Roxul®1000 is a high quality engineered mineral fibre. Its short fibre length results in an excellent dispersion in various matrix materials e.g. resins, bitumen. Rockforce® MS603-Roxul®1000 shows added values in rheology control, reinforcement, dimensional stability, and heat resistance. voir moins | |
| Rockforce® MS605-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS605-Roxul®1000 is a high quality engineered mineral fibre. The relative long fibre is developed for use in wet mixing processes. Rockforce® MS605-Roxul®1000 is consistent in quality in terms of rheology control, reinforcement, dimensional sta...voir plus Rockforce® MS605-Roxul®1000 is a high quality engineered mineral fibre. The relative long fibre is developed for use in wet mixing processes. Rockforce® MS605-Roxul®1000 is consistent in quality in terms of rheology control, reinforcement, dimensional stability, and heat resistance. voir moins | |
| Rockforce® MS610-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS610-Roxul®1000 is a highly cleaned mineral fibre. Its amino-silane surface treatment gives it an optimum bond in phenol, epoxy and resins alike, resulting in better reinforcement properties. Rockforce® MS610-Roxul®1000 shows added values in r...voir plus Rockforce® MS610-Roxul®1000 is a highly cleaned mineral fibre. Its amino-silane surface treatment gives it an optimum bond in phenol, epoxy and resins alike, resulting in better reinforcement properties. Rockforce® MS610-Roxul®1000 shows added values in rheology control, dimensional stability, reinforcement, heat resistance, and chemical bonding with phenol and epoxy resins voir moins | |
| Rockforce® MS640-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS640-Roxul®1000 is a premium quality mineral fibre. Its surface modification gives optimum processing conditions and compatibility/reactivity with sulphur cured rubbers resulting in higher strength properties, better dimension stability and im...voir plus Rockforce® MS640-Roxul®1000 is a premium quality mineral fibre. Its surface modification gives optimum processing conditions and compatibility/reactivity with sulphur cured rubbers resulting in higher strength properties, better dimension stability and improved thermal resistance of the product. Rockforce® MS640-Roxul®1000 reduces the speed of deterioration of the rubber matrix, since engineered mineral fibres are not susceptible to ageing under the applied conditions. voir moins | |
| Rockforce® MS675-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS675-Roxul®1000 is a premium quality engineered mineral fibre. It is a medium length fibre with extreme low shot content, surface treated with a surfactant for excellent dispersion in bitumen / asphalt. Rockforce® MS675-Roxul®1000 can be used ...voir plus Rockforce® MS675-Roxul®1000 is a premium quality engineered mineral fibre. It is a medium length fibre with extreme low shot content, surface treated with a surfactant for excellent dispersion in bitumen / asphalt. Rockforce® MS675-Roxul®1000 can be used in a number of coating applications. It is especially suitable for replacing asbestos and cellulose fibres in bituminous roof coatings and water proofing coatings. Rockforce® MS675-Roxul®1000 is easy to use no major increase of viscosity during production, excellent viscosity building characteristics and controlled rheology, levelling and sag resistance. voir moins | |
| Rockforce® MS730-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS730-Roxul®1000 is a mineral fibre with a very consistent fibre length and a relatively high but consistent content of non-fibrous material, which is applied in refractory products and bitumen / asphalt. Rockforce® MS730-Roxul®1000 shows added...voir plus Rockforce® MS730-Roxul®1000 is a mineral fibre with a very consistent fibre length and a relatively high but consistent content of non-fibrous material, which is applied in refractory products and bitumen / asphalt. Rockforce® MS730-Roxul®1000 shows added values in rheology control, reinforcement, dimensional stability, and heat resistance. voir moins | |
| Rockforce® MS750-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS750-Roxul®1000 is a quality engineered mineral fibre. Its short fibre length results in excellent dispersion properties during dry mixing, even when used in high fibre loads. Rockforce® MS750-Roxul®1000 is consistent in quality in terms of ch...voir plus Rockforce® MS750-Roxul®1000 is a quality engineered mineral fibre. Its short fibre length results in excellent dispersion properties during dry mixing, even when used in high fibre loads. Rockforce® MS750-Roxul®1000 is consistent in quality in terms of chemical composition, shot content, and fibre length. voir moins | |
| Rockforce® RF840-Roxul®1000 | Lapinus Fibres BV | Rockforce® RF840-Roxul®1000 is a premium quality engineered mineral fibre with a dual coating system that gives excellent interaction with phenol resins. Its surface treatment is a combination of amino silane and a cationic surfactant resulting in a signi...voir plus Rockforce® RF840-Roxul®1000 is a premium quality engineered mineral fibre with a dual coating system that gives excellent interaction with phenol resins. Its surface treatment is a combination of amino silane and a cationic surfactant resulting in a significant better flexible strength and higher compression strength. Rockforce® RF840-Roxul®1000 is consistent in terms of chemical composition, surface treatment, purity, and fibre length. voir moins | |
| ROYALE® A | Sibelco | ROYALE® A mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. An optimal mix of chemistry, rheology and parti...voir plus ROYALE® A mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. An optimal mix of chemistry, rheology and particle size distribution, this product arrives ready for use without additional processing, screening or aging. It has a brightness value of 70.0. voir moins | |
| ROYALE® C-60 | Sibelco | ROYALE® C-60 mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. This product arrives ready for use without a...voir plus ROYALE® C-60 mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. This product arrives ready for use without additional processing, screening or aging. It has a brightness value of 77.0. voir moins | |
| ROYALE® R | Sibelco | ROYALE® R mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. An optimal mix of chemistry, rheology and parti...voir plus ROYALE® R mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. An optimal mix of chemistry, rheology and particle size distribution, this product arrives ready for use without additional processing, screening or aging. It has a brightness value of 79.0-80.0. voir moins | |
| RSU - Vermiculite | Micronized Products | RSU - Vermiculite is an asbestos-free vermiculite in a fine powder form. This product is most commonly used as a composite filler in specialty paint formulation applications. | |
| SERICRON® 2M | Specialty Minerals | SERICRON® 2M is a talc product which has a high chemical resistance. This product has an oil absorption of 22 and a bulking value of 23.3. SERICRON® 2M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. | |
| SERICRON® 3M | Specialty Minerals | SERICRON® 3M is a talc product which has a high chemical resistance. This product has an oil absorption of 24 and a median particle size of 8 microns. SERICRON® 3M is used in construction products such as joint compound, adhesives, sealants, putties, and ...voir plus SERICRON® 3M is a talc product which has a high chemical resistance. This product has an oil absorption of 24 and a median particle size of 8 microns. SERICRON® 3M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. voir moins | |
| SERICRON® 4M | Specialty Minerals | SERICRON® 4M is a talc product which has a high chemical resistance. This product has an oil absorption of 30 and a median particle size of 4 microns. SERICRON® 4M is used in construction products such as joint compound, adhesives, sealants, putties, and ...voir plus SERICRON® 4M is a talc product which has a high chemical resistance. This product has an oil absorption of 30 and a median particle size of 4 microns. SERICRON® 4M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. voir moins | |
| SERICRON® 5M | Specialty Minerals | SERICRON® 5M is a talc product which has a high chemical resistance. This product has an oil absorption of 36 and a density of 2.8. SERICRON® 5M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. | |
| SERICRON® 6M | Specialty Minerals | SERICRON® 6M is a talc product which has a high chemical resistance. This product has an oil absorption of 39 and a pH value of 8.8. SERICRON® 6M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. | |
| Silane Couping Agent FD‐1106 | Zhejiang Feidian Chemical Co., Ltd. | Silane Couping Agent FD‐1106 is aluminate modified silane. It is supplied as a colorless transparent liquid. It finds application in matrix resins and inorganic fillers. This product is also used in pyrocondensation material, for handling Mg(OH)2, Al(OH)3...voir plus Silane Couping Agent FD‐1106 is aluminate modified silane. It is supplied as a colorless transparent liquid. It finds application in matrix resins and inorganic fillers. This product is also used in pyrocondensation material, for handling Mg(OH)2, Al(OH)3, can decrease dramatically Mg(OH)2, Al(OH)3 water absorption, enhance the compatibility with resins, and can also promote the product's physical mechanical property and surface degree finish. voir moins | |
| SILFITZ 91 | Hoffmann Mineral | SILFIT Z 91 is a natural combination of corpuscular silica and lamellar kaolinite, which has been subjected to a heat treatment. The components and the thermal process lead to a product that offers special performance benefits as a functional filler. | |
| Silica Fume PSF 87 | Panadyne | Silica Fume PSF 87 is a microsilica or silica fume. This product is composed of ultra-fine amorphous spheres of silicon dioxide (SiO2), and has improved durability, strength, and flowability characteristics. Silica fume also has abrasion, chemical and c...voir plus Silica Fume PSF 87 is a microsilica or silica fume. This product is composed of ultra-fine amorphous spheres of silicon dioxide (SiO2), and has improved durability, strength, and flowability characteristics. Silica fume also has abrasion, chemical and corrosion-resistant properties as well. It can be used in coatings, adhesives, concrete applications, and sealants. voir moins | |
| Silica Fume PSF 92 | Panadyne | Silica Fume PSF 92 is a microsilica or silica fume. This product is composed of ultra-fine amorphous spheres of silicon dioxide (SiO2), and has improved durability, strength, and flowability characteristics. Silica fume also has abrasion, chemical and c...voir plus Silica Fume PSF 92 is a microsilica or silica fume. This product is composed of ultra-fine amorphous spheres of silicon dioxide (SiO2), and has improved durability, strength, and flowability characteristics. Silica fume also has abrasion, chemical and corrosion-resistant properties as well. It can be used in coatings, adhesives, concrete applications, and sealants. voir moins | |
| Silica Fume PSF 94 | Panadyne | Silica Fume PSF 94 is a microsilica or silica fume. This product is composed of ultra-fine amorphous spheres of silicon dioxide (SiO2), and has improved durability, strength, and flowability characteristics. Silica fume also has abrasion, chemical and cor...voir plus Silica Fume PSF 94 is a microsilica or silica fume. This product is composed of ultra-fine amorphous spheres of silicon dioxide (SiO2), and has improved durability, strength, and flowability characteristics. Silica fume also has abrasion, chemical and corrosion-resistant properties as well. It can be used in coatings, adhesives, concrete applications, and sealants. voir moins | |
| Silica Fume PSF 97 | Panadyne | Silica Fume PSF 97 is a microsilica or silica fume. This product is composed of ultra-fine amorphous spheres of silicon dioxide (SiO2), and has improved durability, strength, and flowability characteristics. Silica fume also has abrasion, chemical and cor...voir plus Silica Fume PSF 97 is a microsilica or silica fume. This product is composed of ultra-fine amorphous spheres of silicon dioxide (SiO2), and has improved durability, strength, and flowability characteristics. Silica fume also has abrasion, chemical and corrosion-resistant properties as well. It can be used in coatings, adhesives, concrete applications, and sealants. voir moins | |
| SILLIKOLLOID P 87 | Hoffmann Mineral | SILLIKOLLOID P 87 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinte. Used as a functional filler either on its own or combined with other extenders or flatting agents. | |
| SILLIKOLLOID P 87 PURISS | Hoffmann Mineral | SILLIKOLLOID P 87 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with other extenders or flatting agents. | |
| SILLITIN N 75 | Hoffmann Mineral | SILLITIN N 75 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. It is used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN N 85 | Hoffmann Mineral | SILLITIN N 85 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN N 85 PURISS | Hoffmann Mineral | SILLITIN N 85 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN N 87 | Hoffmann Mineral | SILLITIN N 87 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN V 85 | Hoffmann Mineral | SILLITIN V 85 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN V 88 | Hoffmann Mineral | SILLITIN V 88 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN Z 86 | Hoffmann Mineral | SILLITIN Z 86 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN Z 86 PURISS | Hoffmann Mineral | SILLITIN Z 86 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN Z 89 | Hoffmann Mineral | SILLITIN Z 89 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN Z 89 PURISS | Hoffmann Mineral | SILLITIN Z 89 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. | |
| SILVERBOND® 140 (Troy Grove, IL.) | Sibelco | SILVERBOND® 140 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. Its low s...voir plus SILVERBOND® 140 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. Its low surface area and hardness offers a minimal oil absorption for high loading and stiffening of elastomerics, high performance epoxies and cementitious systems. This product has a mean particle size of 22.5µm. voir moins | |
| SILVERBOND® 200 (Troy Grove, IL.) | Sibelco | SILVERBOND® 200 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. Its low s...voir plus SILVERBOND® 200 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. Its low surface area and hardness offers a minimal oil absorption for high loading and stiffening of elastomerics, high performance epoxies and cementitious systems. This product has a mean particle size of 19.6µm. voir moins | |
| SILVERBOND® 200M (Cleburne, TX.) | Sibelco | SILVERBOND® 200M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This produ...voir plus SILVERBOND® 200M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a surface area of 3258 cm²/g. voir moins | |
| SILVERBOND® 270M (Cleburne, TX.) | Sibelco | SILVERBOND® 270M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This produ...voir plus SILVERBOND® 270M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a surface area of 3605 cm²/g and is completely inert and pH neutral. voir moins | |
| SILVERBOND® 300 (Troy Grove, IL.) | Sibelco | SILVERBOND® 300 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This prod...voir plus SILVERBOND® 300 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a mean particle size of 16.6µm. voir moins | |
| SILVERBOND® 325 (Troy Grove, IL.) | Sibelco | SILVERBOND® 325 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This prod...voir plus SILVERBOND® 325 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a mean particle size of 12.5µm. voir moins | |
| SILVERBOND® 325M (Cleburne, TX.) | Sibelco | SILVERBOND® 325M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This produ...voir plus SILVERBOND® 325M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a surface area of 4825 cm²/g and is completely inert and pH neutral. voir moins | |
| SILVERBOND® 325M (Lugoff, SC.) | Sibelco | SILVERBOND® 325M (Lugoff, SC.) is a ground crystalline silica produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This produ...voir plus SILVERBOND® 325M (Lugoff, SC.) is a ground crystalline silica produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product is completely inert and will not degrade when employed in extreme temperatures or harsh environments. It has a median particle size of 15.3µm. voir moins | |
| SILVERBOND® 325M (Marston, NC.) | Sibelco | SILVERBOND® 325M (Marston, NC.) is a ground crystalline silica produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This prod...voir plus SILVERBOND® 325M (Marston, NC.) is a ground crystalline silica produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product is completely inert and will not degrade when employed in extreme temperatures or harsh environments. voir moins | |
| Silverline® 403 | Imerys Performance Additives | Silverline® 403 is a platy, high purity talc that enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. | |
| SILZOT® FS-X1 | AlzChem AG | SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride po...voir plus SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride powders show a very stable and uniform high quality and are manufactured with best environmental practice. voir moins | |
| SILZOT® RTP | AlzChem AG | SILZOT® RTP is a spray dried granulated silicon nitride powder containing processing and sintering additives. | |
| SNOBRITE® 60 (Mcintyre, GA) | Sibelco | SNOBRITE® 60 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resist...voir plus SNOBRITE® 60 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. 34% passes through a sieve of <.5 microns. It has a median particle size of 1.2µ. voir moins | |
| SNOBRITE® 68 (Mcintyre, GA) | Sibelco | SNOBRITE® 68 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resist...voir plus SNOBRITE® 68 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. 40% passes through a sieve of <.5 microns. It has a median particle size of 0.9µ. voir moins | |
| SNOBRITE® 75 (Mcintyre, GA) | Sibelco | SNOBRITE® 75 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resist...voir plus SNOBRITE® 75 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. 50% passes through a sieve of <.5 microns. It has a median particle size of 0.5µ. voir moins | |
| SNOBRITE® 75HB (Mcintyre, GA) | Sibelco | SNOBRITE® 75HB (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resi...voir plus SNOBRITE® 75HB (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. 56% passes through a sieve of <.5 microns. It has a median particle size of 0.5µ. voir moins | |
| Snowtalc | Micronized Products | Snowtalc is a soft, lamellar inert mineral, which occurs typically as magnesium silicate. This product is most commonly used as a white pigment in high performance paint and coating applications. | |
| Snowtalc Ultra | Micronized Products | Snowtalc Ultra is a soft, lamellar inert mineral, which occurs typically as magnesium silicate. This product provides enhanced purity, whiteness, and chemical stability. Snowtalc Ultra is most commonly used as a white pigment in high performance paint an...voir plus Snowtalc Ultra is a soft, lamellar inert mineral, which occurs typically as magnesium silicate. This product provides enhanced purity, whiteness, and chemical stability. Snowtalc Ultra is most commonly used as a white pigment in high performance paint and coating applications. voir moins | |
| SORPALU® Nano Alumina Powder for RC Photo Paper Coating SPL110 | Human Chemicals Co., Ltd. | SORPALU® Nano Alumina Powder for RC Photo Paper Coating SPL110 is an alumina hydrate appearing as white free flowing powder. It can be readily dispersed in diluted mono valent acids like nitric acid, acetic acid etc. Stable dispersions are obtained to 25w...voir plus SORPALU® Nano Alumina Powder for RC Photo Paper Coating SPL110 is an alumina hydrate appearing as white free flowing powder. It can be readily dispersed in diluted mono valent acids like nitric acid, acetic acid etc. Stable dispersions are obtained to 25wt% solid concentration. voir moins | |
| SpaceRite® S-3 Alumina Trihydrate | Huber Engineered Materials | SpaceRite® S-3 is a fine crystalline, aluminum trihydroxide with uniform particles averaging about one micron in diameter. It is an organic-free pure white powder produced by a proprietary precipitation process that closely controls particle-size distribu...voir plus SpaceRite® S-3 is a fine crystalline, aluminum trihydroxide with uniform particles averaging about one micron in diameter. It is an organic-free pure white powder produced by a proprietary precipitation process that closely controls particle-size distributions. SpaceRite S-3 can also replace other extenders providing enhanced performance and benefits in coatings and adhesives. SpaceRite S-3 has many uses in architectural coatings and high solids/low VOC coatings. voir moins | |
| Speswhite™ | Imerys Kaolin | Speswhite™ is a highly refined kaolin of ultrafine particle size and high brightness. This hydrous kaolin (china clay) originates from deposits in the southwest of England. | |
| Sphericel® 110P8 | Potters Industries Inc. | Sphericel® 110P8 is a white-colored, fused borosilicate glass in a hollow microsphere form. This product has a bulk density of 0.49 g/cc and a maximum working pressure of 10,000 psi. Sphericel® 110P8 is most commonly used to increase thermal and acousti...voir plus Sphericel® 110P8 is a white-colored, fused borosilicate glass in a hollow microsphere form. This product has a bulk density of 0.49 g/cc and a maximum working pressure of 10,000 psi. Sphericel® 110P8 is most commonly used to increase thermal and acoustic insulation in autobody sealant and coating applications. voir moins | |
| Sphericel® 25P45 | Potters Industries Inc. | Sphericel® 25P45 is a white-colored, fused borosilicate glass in a hollow microsphere form. This product has a bulk density of 0.14 g/cc and a maximum working pressure of 750 psi. Sphericel® 25P45 is most commonly used to increase thermal and acoustic i...voir plus Sphericel® 25P45 is a white-colored, fused borosilicate glass in a hollow microsphere form. This product has a bulk density of 0.14 g/cc and a maximum working pressure of 750 psi. Sphericel® 25P45 is most commonly used to increase thermal and acoustic insulation in autobody sealant and coating applications. voir moins | |
| Sphericel® 34P30 | Potters Industries Inc. | Sphericel® 34P30 is a white-colored, fused borosilicate glass in a hollow microsphere form. This product has a bulk density of 0.22 g/cc and a maximum working pressure of 3,000 psi. Sphericel® 34P30 is most commonly used to increase thermal and acoustic...voir plus Sphericel® 34P30 is a white-colored, fused borosilicate glass in a hollow microsphere form. This product has a bulk density of 0.22 g/cc and a maximum working pressure of 3,000 psi. Sphericel® 34P30 is most commonly used to increase thermal and acoustic insulation in autobody sealant and coating applications. voir moins | |
| Sphericel® 45P25 | Potters Industries Inc. | Sphericel® 45P25 is a white-colored, fused borosilicate glass in a hollow microsphere form. This product has a bulk density of 0.26 g/cc and a maximum working pressure of 4,000 psi. Sphericel® 45P25 is most commonly used to increase thermal and acoustic...voir plus Sphericel® 45P25 is a white-colored, fused borosilicate glass in a hollow microsphere form. This product has a bulk density of 0.26 g/cc and a maximum working pressure of 4,000 psi. Sphericel® 45P25 is most commonly used to increase thermal and acoustic insulation in autobody sealant and coating applications. voir moins |
