| CN2207 | Sartomer Americas | CN2207 is a polyester acrylate oligomer designed for UV/EB lithographic inks. It exhibits good pigment wetting characteristics and will yield inks with high viscosity and low tack. On-press performance is enhanced because of the good water balance and ver...voir plus CN2207 is a polyester acrylate oligomer designed for UV/EB lithographic inks. It exhibits good pigment wetting characteristics and will yield inks with high viscosity and low tack. On-press performance is enhanced because of the good water balance and very fast cure speed. Suggested applications are coatings, metal and wood coatings, litho, offset and screen inks. voir moins | |
| CN2261LV | Sartomer Americas | CN2261LV is a polyester acrylate oligomer. CN2261LV was developed for UV curable wood and floor coating applications, where hardness and abrasion resistance are required. CN2261LV demonstrates excellent cure rates and impact strength. | |
| CN2262 | Sartomer Americas | CN2262 is a polyester acrylate oligomer with a Primary Irritation Index (PII) of zero. CN2262 was developed for sprayable UV curable wood coatings applications where hardness and abrasion resistance are required. CN2262 demonstrates excellent cure rates a...voir plus CN2262 is a polyester acrylate oligomer with a Primary Irritation Index (PII) of zero. CN2262 was developed for sprayable UV curable wood coatings applications where hardness and abrasion resistance are required. CN2262 demonstrates excellent cure rates and intra-coat adhesion. voir moins | |
| CN2270 | Sartomer Americas | CN2270 provides good pigment wetting, low viscosity and adhesion to polyolefins and vinyl substrates. When used in UV curable inks and clear coatings, CN2270 should be accompanied by a higher viscosity resin, such as CN119 or CN293, to improve three-roll ...voir plus CN2270 provides good pigment wetting, low viscosity and adhesion to polyolefins and vinyl substrates. When used in UV curable inks and clear coatings, CN2270 should be accompanied by a higher viscosity resin, such as CN119 or CN293, to improve three-roll mill pigment dispersing. voir moins | |
| CN2271E | Sartomer Americas | CN2271E is designed to provide a higher UV cure rate than CN2270. Use of this oligomer with epoxy and urethane acrylates results in inks which behave thixotropically. CN2271E is ideal for high TiO2 dispersions. It can produce Newtonian like inks. This oli...voir plus CN2271E is designed to provide a higher UV cure rate than CN2270. Use of this oligomer with epoxy and urethane acrylates results in inks which behave thixotropically. CN2271E is ideal for high TiO2 dispersions. It can produce Newtonian like inks. This oligomer is perfect for diluting epoxy acrylates, improving adhesion, and increasing the cure rate. Recommended uses are coatings, flexo, gravure and offset inks. voir moins | |
| CN2273 | Sartomer Americas | CN2273 is designed for very fast cure response in inks and coatings. This polyester acrylate has low viscosity and flexibility with good pigment wetting characteristics. The unique structure provides natural thixotropic properties for screen and lithograp...voir plus CN2273 is designed for very fast cure response in inks and coatings. This polyester acrylate has low viscosity and flexibility with good pigment wetting characteristics. The unique structure provides natural thixotropic properties for screen and lithographic inks. Its flexibility, low viscosity, and fast surface cure speed make CN2273 suitable for overprint varnishes and coatings requiring low odor. voir moins | |
| CN2279 | Sartomer Americas | CN2279 is a clear liquid, polyester acrylate grinding vehicle which has low viscosity and good pigment wetting. Dispersions and inks made with this product, exhibit low viscosity, excellent flow, excellent stability, and good color strength. It also shows...voir plus CN2279 is a clear liquid, polyester acrylate grinding vehicle which has low viscosity and good pigment wetting. Dispersions and inks made with this product, exhibit low viscosity, excellent flow, excellent stability, and good color strength. It also shows good adhesion, low shrinkage, and high flexibilty. CN2279 is designed for UV ink jet and UV flexographic markets. voir moins | |
| CN2302 | Sartomer Americas | CN2302 is a hyperbranched polyester acrylate oligomer designed with low viscosity and high functionality. Suggested applications include metal, water-based and plastic coatings, electronics, and flexo and Inkjet inks. | |
| CN2303 | Sartomer Americas | CN2303 is a hyperbranched polyester acrylate oligomer designed with low viscosity and high functionality. CN2303 possesses Low viscosity and fast surface cure. CN2303 is suited to UV/EB cured inks, hardcoats, plastic and water-based coatings. | |
| CN2304 | Sartomer Americas | CN2304 is a hyperbranched polyester acrylate oligomer designed with low viscosity and high functionality. CN2304 possesses low viscosity and fast surface cure. CN2304 is suited to UV/EB-cured inks, hardcoats, plastic and water-based coatings. | |
| CN292 | Sartomer Americas | CN292 is a multifunctional, low viscosity polyester acrylate designed as a general purpose fast reacting oligomer. Its excellent wetting properties make CN292 suitable for inks, particularly flexographic inks. | |
| CN294E | Sartomer Americas | CN294E is a clear liquid tetrafunctional acrylated polyester oligomer. This product has good chemical and heat resistance as well as good adhesion and high abrasion resistance. It also has a fast cure response, good lithographic behavior, and good pigment...voir plus CN294E is a clear liquid tetrafunctional acrylated polyester oligomer. This product has good chemical and heat resistance as well as good adhesion and high abrasion resistance. It also has a fast cure response, good lithographic behavior, and good pigment wetting. CN294E is used in UV curable coatings and inks including metal, paper, and plastic coatings and flexographic, screen, and lithographic inks. voir moins | |
| CN296 | Sartomer Americas | CN296 is a hexafunctional polyester acrylate oligomer that demonstrates good pigment wetting and fast cure in lithographic and flexographic inks and abrasion resistant coatings. | |
| CN299 | Sartomer Americas | CN299 is a clear to hazy liquid tetrafunctional acrylated polyester oligomer. It features fast cure response, good lithographic behavior, good pigment wetting, and hydrophobic/hydrophilic balance. CN299 is used in UV-curable coatings and inks including me...voir plus CN299 is a clear to hazy liquid tetrafunctional acrylated polyester oligomer. It features fast cure response, good lithographic behavior, good pigment wetting, and hydrophobic/hydrophilic balance. CN299 is used in UV-curable coatings and inks including metal, plastic, and paper coatings as well as flexographic, screen, and lithographic inks. This product also has good chemical resistance, good heat resistance, high abrasion resistance and good adhesion. voir moins | |
| DOUBLEMER® 236GP | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 236GP is a polyester acrylate oligomer blended with 40% Glycerylpropoxy Triacrylate (GPTA) monomer. It imparts good wet lithographic behavior and pigment wetting properties. The films of this product cured by ultraviolet light (UV) or electron ...voir plus DOUBLEMER® 236GP is a polyester acrylate oligomer blended with 40% Glycerylpropoxy Triacrylate (GPTA) monomer. It imparts good wet lithographic behavior and pigment wetting properties. The films of this product cured by ultraviolet light (UV) or electron beam (EB) exhibit good adhesion to metals, plastics, and papers. voir moins | |
| DOUBLEMER® 278-X25 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 278-X25 is a polyester acrylate oligomer blended with 25% Isobornyl methacrylate, which improves adhesion to substrates, such as PP and PE, PET. It is characterized by its acid functionality, low shrinkage, and excellent adhesion. DOUBLEMER® 27...voir plus DOUBLEMER® 278-X25 is a polyester acrylate oligomer blended with 25% Isobornyl methacrylate, which improves adhesion to substrates, such as PP and PE, PET. It is characterized by its acid functionality, low shrinkage, and excellent adhesion. DOUBLEMER® 278-X25 is recommended for use in PP/PE/PET plastic application as well as an metal and glass adhesion promoter. voir moins | |
| DOUBLEMER® 286 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 286 is a tetra-functional amine modified polyester acrylate oligomer. Because of the special structure of its backbone and the high acrylic functionality. This product provides good abrasion resistance, solvent resistance and hardness. It is de...voir plus DOUBLEMER® 286 is a tetra-functional amine modified polyester acrylate oligomer. Because of the special structure of its backbone and the high acrylic functionality. This product provides good abrasion resistance, solvent resistance and hardness. It is designed for clear coating or ink on wood, paper and plastics to obtain hard films. voir moins | |
| DOUBLEMER® L234 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® L234 is a special tetra-functional polyester acrylate resin for LED curable systems. This product is designed especially for UV LED applications, but is equally suitable for other low energy curing applications (e.g. UV-A curing). DOUBLEMER® L2...voir plus DOUBLEMER® L234 is a special tetra-functional polyester acrylate resin for LED curable systems. This product is designed especially for UV LED applications, but is equally suitable for other low energy curing applications (e.g. UV-A curing). DOUBLEMER® L234 can also be used for reduction of oxygen inhibition in UV/EB curable systems, when cured with the standard medium pressure Hg lamps. voir moins | |
| DOUBLEMER® UA-0099-1 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® UA-0099-1 is a modified polyester-acrylate oligomer with good adhesion on metal, plastic and paper. It has good pigment wettability, color saturation, high gloss and moderate hardness. This product is particularly suitable for offset printing i...voir plus DOUBLEMER® UA-0099-1 is a modified polyester-acrylate oligomer with good adhesion on metal, plastic and paper. It has good pigment wettability, color saturation, high gloss and moderate hardness. This product is particularly suitable for offset printing inks. Flexographic, silk printing inks are also very effective. voir moins | |
| EBECRYL® 1859 | Allnex | EBECRYL® 1859 is a high molecular weight polyester acrylate especially developed for high speed UV, HUV, UV LED, and EB cured offset lithographic inks. EBECRYL® 1859 exhibits excellent lithographic behavior, very good pigment wetting and high reactivity. | Request Sample |
| EBECRYL® 1871 | Allnex | EBECRYL® 1871 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink-water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® 1871 display excellent rheological properties ensuri...voir plus EBECRYL® 1871 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink-water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® 1871 display excellent rheological properties ensuring good ink transfer from the printing plate to the blanket and then to the substrate, combined with good dot definition. voir moins | Request Sample |
| GENOMER* 4302 | Rahn USA Corp. | GENOMER* 4302 is an aliphatic polyester triurethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: non yellowing coatings for plastics; non yellowing screen an...voir plus GENOMER* 4302 is an aliphatic polyester triurethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: non yellowing coatings for plastics; non yellowing screen and decor varnishes; paper and board coatings premiums; and industrial coatings. The product provides outstanding weatherability and mechanical properties. The product is used as the sole oligomer or in association with other urethane acrylates and acrylate monomers. voir moins | Request Sample |
| HS9701 | Tianyi Chemical Engineering Material Co., Ltd. | HS9701, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in coil coatings, inks, and vacuum plating primers. This product wets pigments well and is resistant to boiling water. | |
| HS9705 | Tianyi Chemical Engineering Material Co., Ltd. | HS9705, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in offset printing inks, screen printing inks, and adhesives. This product is resistant to boiling water and exhibits low shrinkage properties. | |
| HS9706 | Tianyi Chemical Engineering Material Co., Ltd. | HS9706, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in gravure inks, inkjet printing applications, oil inks, and gravure varnishes. This product has low viscosity and is highly reactive. | |
| HS9713 | Tianyi Chemical Engineering Material Co., Ltd. | HS9713, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in offset printing, silk-screen printing, flexographic printing applications, and in wooden coatings. This product wets pigments well and is flexible u...voir plus HS9713, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in offset printing, silk-screen printing, flexographic printing applications, and in wooden coatings. This product wets pigments well and is flexible under most conditions. voir moins | |
| HS9714 | Tianyi Chemical Engineering Material Co., Ltd. | HS9714, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in offset printing, vacuum plating primers, wooden coatings, and grinding color slurries. This product is resistant to boiling water and exhibits good ...voir plus HS9714, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in offset printing, vacuum plating primers, wooden coatings, and grinding color slurries. This product is resistant to boiling water and exhibits good plating properties with high reactivity. voir moins | |
| HS9732 | Tianyi Chemical Engineering Material Co., Ltd. | HS9732, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in metal coatings, BMC high-temperature resistant coatings, glass paints, and plastic primers. This product has high viscosity and tack. It also provi...voir plus HS9732, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in metal coatings, BMC high-temperature resistant coatings, glass paints, and plastic primers. This product has high viscosity and tack. It also provides a good balance between water and inks. voir moins | |
| Oligomer SM6401 | Jiangsu Sanmu Group Corporation | Oligomer SM6401 is a polyester acrylate oligomer that is designed for high reactivity with excellent pigment wetting properties. It can be used in coatings and inks. | |
| Oligomer SM6605 | Jiangsu Sanmu Group Corporation | Oligomer SM6605 is a polyester acrylate oligomer that is designed for high reactivity with excellent pigment wetting properties. It can be used in papers, woods and plastics. | |
| Oligomer SM6606 | Jiangsu Sanmu Group Corporation | Oligomer SM6606 is a polyester acrylate oligomer that is designed for high reactivity with excellent pigment wetting properties. It can be used in wood flooring coatings. | |
| POLYESTER ACRYLATE 03-849 | Rahn USA Corp. | POLYESTER ACRYLATE 03-849 is a polyester acrylate resin for radically curable inks, coatings and adhesives. The product provides good adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. It is recommended for use in print...voir plus POLYESTER ACRYLATE 03-849 is a polyester acrylate resin for radically curable inks, coatings and adhesives. The product provides good adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. It is recommended for use in printing inks and varnishes, overprint varnishes, plastic coatings and wood and industrial coatings. voir moins | Request Sample |
| Polyester Actylate SP 224 | Soltech Ltd | Polyester Actylate SP 224 is an acid modified polyester acrylate oligomer that is designed to provide adhesion on glass and plastics, light color, and inter-coat adhesion. Common applications of this product include primers for metal, laminating adhesives...voir plus Polyester Actylate SP 224 is an acid modified polyester acrylate oligomer that is designed to provide adhesion on glass and plastics, light color, and inter-coat adhesion. Common applications of this product include primers for metal, laminating adhesives, and screen inks. Polyester Actylate SP 224 is 70% polymer solid by weight with a viscosity of 50,000-100,000 at 25℃. voir moins | |
| Polyester Actylate SP 236 | Soltech Ltd | Polyester Actylate SP 236 is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesi...voir plus Polyester Actylate SP 236 is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 236 is 60% polymer solid by weight with a viscosity of 2,400-2,800 at 25℃. voir moins | |
| Polyester Actylate SP 236L | Soltech Ltd | Polyester Actylate SP 236L is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhes...voir plus Polyester Actylate SP 236L is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 236L is 60% polymer solid by weight with a viscosity of 1,200-1,800 at 25℃. voir moins | |
| Polyester Actylate SP 238 | Soltech Ltd | Polyester Actylate SP 238 is a chlorinated polyester acrylate oligomer with GPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesio...voir plus Polyester Actylate SP 238 is a chlorinated polyester acrylate oligomer with GPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 238 is 60% polymer solid by weight with a viscosity of 1,200-1,800 at 25℃. voir moins | |
| Polyester Actylate SP 260 | Soltech Ltd | Polyester Actylate SP 260 is a multifunctional polyester acrylate oligomer with 5% TMPTA that is designed to provide compatibility and heat resistance. Common applications of this product include wet lithographic inks, wet lithographic coatings, and top c...voir plus Polyester Actylate SP 260 is a multifunctional polyester acrylate oligomer with 5% TMPTA that is designed to provide compatibility and heat resistance. Common applications of this product include wet lithographic inks, wet lithographic coatings, and top coatings for vacuum metalizing. Polyester Actylate SP 260 is 95% polymer solid by weight with a viscosity of 6,000-14,000 at 25℃. voir moins | |
| Polyester Actylate SP 270 | Soltech Ltd | Polyester Actylate SP 270 is a carboxylated polyester acrylate oligomer designed to provide low shrinkage, low odor, acid functionality, and adhesion to copper. Common applications of this product include various alkali-strippable coatings. Polyester Acty...voir plus Polyester Actylate SP 270 is a carboxylated polyester acrylate oligomer designed to provide low shrinkage, low odor, acid functionality, and adhesion to copper. Common applications of this product include various alkali-strippable coatings. Polyester Actylate SP 270 is 100% polymer solid by weight with a viscosity of 500-2,500 at 25℃. voir moins | |
| Polyester Actylate SP 277 | Soltech Ltd | Polyester Actylate SP 277 is a carboxylated polyester acrylate oligomer designed to provide low shrinkage, low odor, acid functionality, and adhesion to copper. Common applications of this product include various alkali-strippable coatings. Polyester Acty...voir plus Polyester Actylate SP 277 is a carboxylated polyester acrylate oligomer designed to provide low shrinkage, low odor, acid functionality, and adhesion to copper. Common applications of this product include various alkali-strippable coatings. Polyester Actylate SP 277 is 100% polymer solid by weight with a viscosity of 5,000-8,000 at 25℃. voir moins | |
| Polyester Actylate SP 280 | Soltech Ltd | Polyester Actylate SP 280 is a low viscosity multi-functional polyester acrylate oligomer designed to provide light color, high gloss, fast curing, pigment wetting, and low odor. Common applications of this product include high gloss coatings, Polyester A...voir plus Polyester Actylate SP 280 is a low viscosity multi-functional polyester acrylate oligomer designed to provide light color, high gloss, fast curing, pigment wetting, and low odor. Common applications of this product include high gloss coatings, Polyester Actylate SP 280 is 100% polymer solid by weight with a viscosity of 2,500-3,500 at 25℃. voir moins | |
| Polyester Actylate SP 281 | Soltech Ltd | Polyester Actylate SP 281 is a low viscosity amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing. Common applications of this product include clear coatings, high gloss co...voir plus Polyester Actylate SP 281 is a low viscosity amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing. Common applications of this product include clear coatings, high gloss coatings, top coatings for wood, flexographic inks, and screen inks, Polyester Actylate SP 281 is 100% polymer solid by weight with a viscosity of 80-120 at 25℃. voir moins | |
| Polyester Actylate SP 283 | Soltech Ltd | Polyester Actylate SP 283 is an amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing, and low residual odor. Common applications of this product include clear coatings, hig...voir plus Polyester Actylate SP 283 is an amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing, and low residual odor. Common applications of this product include clear coatings, high gloss coatings, top coatings for wood, flexographic inks, and screen inks, Polyester Actylate SP 283 is 100% polymer solid by weight with a viscosity of 1,000-2,000 at 25℃. voir moins |
