| ATTAFLOW® FL | BASF Formulation Additives | ATTAFLOW® FL suspension aid is a specially designed attapulgite gellant fluid grade suited for use in a wide range of industries. | |
| ATTAGEL® 15 | BASF Formulation Additives | ATTAGEL® 15 is an economical, coarse particle-size attapulgite product that has high gel strength and a smooth texture with good spreading characteristics. Although ATTAGEL® 15 has a slightly higher residue than our other products, it is a cost-effective ...voir plus ATTAGEL® 15 is an economical, coarse particle-size attapulgite product that has high gel strength and a smooth texture with good spreading characteristics. Although ATTAGEL® 15 has a slightly higher residue than our other products, it is a cost-effective alternative in systems where high residue is acceptable. voir moins | |
| ATTAGEL® 30 | BASF Formulation Additives | ATTAGEL® 30 is a medium-fine grind, cost-effective thickener for use in a wide variety of thickening applications. ATTAGEL® 30 is typically used where particle size and residue are not critical or where superior mixing and dispersion is available. | |
| ATTAGEL® 40 | BASF Formulation Additives | ATTAGEL® 40 is an inert powdered gelling grade of attapulgite. It is finely pulverized to effectively form colloidal gels in ionic and non-ionic aqueous solutions to provide thixotropic thickening and suspension. This product is recommended for use in pa...voir plus ATTAGEL® 40 is an inert powdered gelling grade of attapulgite. It is finely pulverized to effectively form colloidal gels in ionic and non-ionic aqueous solutions to provide thixotropic thickening and suspension. This product is recommended for use in paint and coatings applications where sag resistance, spatter control and syneresis control is required. voir moins | |
| ATTAGEL® 50 | BASF Formulation Additives | ATTAGEL® 50 is an inert powdered gelling grade of attapulgite. It is finely pulverized to effectively form colloidal gels in ionic and non-ionic aqueous solutions to provide thixotropic thickening and suspension. This product is recommended for use in pai...voir plus ATTAGEL® 50 is an inert powdered gelling grade of attapulgite. It is finely pulverized to effectively form colloidal gels in ionic and non-ionic aqueous solutions to provide thixotropic thickening and suspension. This product is recommended for use in paint and coatings applications where sag resistance, spatter control, and syneresis control is required. In non-aqueous organic liquid systems, ATTAGEL® 50 can impart thickening and suspension when dispersed with an appropriate surfactant. It is also used in agriculture suspension products for suspending the active formulation ingredients. voir moins | |
| COATOSIL* 1211 COATINGS ADDITIVE | Momentive | CoatOSil* 1211 coatings additive is specially engineered and may impart non-foaming and superwetting properties in waterborne coatings for spray applications, high speed roll applications and hard to wet surfaces. It is a 100% active, organomodified silic...voir plus CoatOSil* 1211 coatings additive is specially engineered and may impart non-foaming and superwetting properties in waterborne coatings for spray applications, high speed roll applications and hard to wet surfaces. It is a 100% active, organomodified silicone that should not interfere with recoatability. voir moins | |
| COATOSIL* 1220 SURFACTANT | Momentive | CoatOSil 1220 surfactant is a non-fluorine based organomodified siloxane surfactant with the Description unique superwetting properties in waterborne coatings for spray applications, high-speed roll applications and hard-to-wet surfaces. It can also impro...voir plus CoatOSil 1220 surfactant is a non-fluorine based organomodified siloxane surfactant with the Description unique superwetting properties in waterborne coatings for spray applications, high-speed roll applications and hard-to-wet surfaces. It can also improve flow and leveling properties, while remaining stable in aqueous formulations having pH 6-11. CoatOSil 1220 surfactant solutions typically provide spread areas more than 100 times greater than the corresponding volume drop of pure water, and 2 voir moins | |
| COATOSIL* 1770 SILANE | Momentive | CoatOSil* 1770 silane is a crosslinking additive for waterborne coatings. An improved combination of performance, appearance and handling characteristics may be possible in waterborne coatings formulated with CoatOSil 1770 silane. When properly formulate...voir plus CoatOSil* 1770 silane is a crosslinking additive for waterborne coatings. An improved combination of performance, appearance and handling characteristics may be possible in waterborne coatings formulated with CoatOSil 1770 silane. When properly formulated, crosslinking can occur under both room temperature and elevated temperature conditions. voir moins | |
| COATOSIL* 2287 SILANE | Momentive | Coatosil 2287 silane may provide shelf stable non-yellowing cross-linking performance to enhance the physical properties of waterborne dispersions polymers such as polyurethane and acrylic latexes. | |
| COATOSIL* 2287 SILANE | Momentive | CoatOSil 2287 silane may provide shelf stable non-yellowing crosslinking performance to enhance the physical properties of waterborne dispersion polymers such as polyurethane and acrylic latexes. When CoatOsil 2287 silane is incorporated as a crosslinker ...voir plus CoatOSil 2287 silane may provide shelf stable non-yellowing crosslinking performance to enhance the physical properties of waterborne dispersion polymers such as polyurethane and acrylic latexes. When CoatOsil 2287 silane is incorporated as a crosslinker or adhesion promoter, it may provide improved water resistance and wet adhesion, with good shelf stability. voir moins | |
| COATOSIL* 2812 COATINGS ADDITIVE | Momentive | COATOSIL* 2812 COATINGS ADDITIVE is a linear silicone-polyether (EO) block copolymer with -OH end group. It can help reduce coefficient of friction (COF) and enhance slip and mar resistance in waterborne, water reducible, conventional and high-solids solv...voir plus COATOSIL* 2812 COATINGS ADDITIVE is a linear silicone-polyether (EO) block copolymer with -OH end group. It can help reduce coefficient of friction (COF) and enhance slip and mar resistance in waterborne, water reducible, conventional and high-solids solvent systems. Applications include waterborne coatings, solventborne coatings and solventless or high-solids coatings. voir moins | |
| COATOSIL* 3500 COATINGS ADDITIVE | Momentive | CoatOSil* 3500 coatings additive provides an excellent balance of properties in radiation cure coatings. It reduces coefficient of friction (COF) in acrylate based coatings, without generating foam or reducing gloss. This is possible because of its compat...voir plus CoatOSil* 3500 coatings additive provides an excellent balance of properties in radiation cure coatings. It reduces coefficient of friction (COF) in acrylate based coatings, without generating foam or reducing gloss. This is possible because of its compatibility in formulated coatings. voir moins | |
| COATOSIL* 3501 COATINGS ADDITIVE | Momentive | CoatOSil* 3501 coatings additive is Momentive's most powerful friction reducing agent, providing the maximum in coefficient of friction (COF) reduction for radiation-cured formulations in its portfolio of coatings additives. This additive also functions a...voir plus CoatOSil* 3501 coatings additive is Momentive's most powerful friction reducing agent, providing the maximum in coefficient of friction (COF) reduction for radiation-cured formulations in its portfolio of coatings additives. This additive also functions as an extremely efficient defoamer, especially in aqueous systems. voir moins | |
| COATOSIL* 3509 COATINGS ADDITIVE | Momentive | CoatOSil* 3509 coatings additive is a reactive 100% active slip agent that may help improve abrasion and mar resistance in UV and E Beam cured acrylate resins. Additional benefits include enhanced flow and leveling, substrate wetting and gloss retention. | |
| COATOSIL* 3573 COATINGS ADDITIVE | Momentive | CoatOSil* 3573 coatings additive is a highly compatible agent for reducing the coefficient of friction (COF) of radiation-cured coatings containing either acrylated or cycloaliphatic epoxy resins. It contains 100% of an organomodified silicone polymer. It...voir plus CoatOSil* 3573 coatings additive is a highly compatible agent for reducing the coefficient of friction (COF) of radiation-cured coatings containing either acrylated or cycloaliphatic epoxy resins. It contains 100% of an organomodified silicone polymer. It imparts abrasion and mar resistance to the radiation-cured coatings. voir moins | |
| COATOSIL* 7001 | Momentive | Coatosil 7001 copolymer is an additive for improved flow and leveling of solventborne two-component acrylic-polyol isocyanate cured coatings. | |
| COATOSIL* 7001 SILICONE-POLYETHER BLOCK COPOLYMER | Momentive | COATOSIL* 7001 SILICONE-POLYETHER BLOCK COPOLYMER is an additive for improved flow and leveling of solventborne two-component acrylic-polyol isocyanate cured coatings. When incorporated as a flow and leveling additive, the appearance and distinctness of i...voir plus COATOSIL* 7001 SILICONE-POLYETHER BLOCK COPOLYMER is an additive for improved flow and leveling of solventborne two-component acrylic-polyol isocyanate cured coatings. When incorporated as a flow and leveling additive, the appearance and distinctness of image (DOI) of the clearcoat is typically excellent, compared to current commercial additives used in the fomulations discussed. voir moins | |
| CoatOSil* DRI Waterborne Silicone | Momentive | CoatOSil DRI waterborne silicone can help reduce water uptake and improve UV resistance in organic waterborne coating compositions. Its innovative chemical structure enables it to overcome the difficulties of combining silicone materials with organic wate...voir plus CoatOSil DRI waterborne silicone can help reduce water uptake and improve UV resistance in organic waterborne coating compositions. Its innovative chemical structure enables it to overcome the difficulties of combining silicone materials with organic waterborne resins. This product has been shown to improve hydrophobicity and elongation properties when used as a cobinder with acrylic latexes, resulting in more flexible coatings and sealants. CoatOSil DRI waterborne silicone may also be considered as a sole binder when maximizing thermal and UV stability is a priority. When applied alone, this product typically cures at room temperature to form an elastomeric film. *CoatOSil, Momentive and the Momentive logo are trademarks of Momentive Performance Materials Inc. voir moins | |
| COATOSIL DSA 10 | Momentive | CoatOSil DSA 10 is a silicone micro resin and an excellent candidate to consider for use as an additive to help improve the performance of coatings. In addition to providing the specific characteristics of silicones, such as lubricity and water repellency...voir plus CoatOSil DSA 10 is a silicone micro resin and an excellent candidate to consider for use as an additive to help improve the performance of coatings. In addition to providing the specific characteristics of silicones, such as lubricity and water repellency, CoatOSil DSA 10 silicone micro resin has a lower specific gravity than conventional inorganic fine powders and typically has superior heat and chemical resistance as compared with conventional organic fine powders. voir moins | |
| COATOSIL DSA 6 | Momentive | CoatOSil DSA 6 friction modifier is a silicone micro resin and an excellent candidate to consider for use as an additive to help improve the performance of coatings. In addition to providing silicone lubricity, CoatOSil DSA 6 friction modifierhas a lower ...voir plus CoatOSil DSA 6 friction modifier is a silicone micro resin and an excellent candidate to consider for use as an additive to help improve the performance of coatings. In addition to providing silicone lubricity, CoatOSil DSA 6 friction modifierhas a lower specific gravity than conventional inorganic fine powders and typcally has superior heat and chemical resistance as compared with conventional organic fine powders. voir moins | |
| CoatOSil* FLX Coating Modifier | Momentive | CoatOSil* FLX is a polysiloxane resin modifier for silane/polysiloxane containing coatings, including hybrids. It improves coating flexibility, gloss retention under harsh weathering conditions, and corrosion performance in neutral spray testing. This pro...voir plus CoatOSil* FLX is a polysiloxane resin modifier for silane/polysiloxane containing coatings, including hybrids. It improves coating flexibility, gloss retention under harsh weathering conditions, and corrosion performance in neutral spray testing. This product is compatible with many organic resin systems and pigments. voir moins | |
| CoatOSil* MP 200 Silane | Momentive | CoatOSil* MP 200 Silane is an epoxy functional silane oligomer that may be considered for use as an adhesion promoter or binder in polysulfide, urethane, epoxy and acrylic caulks, sealants, adhesives and coatings. It typically aids adhesion promotion and ...voir plus CoatOSil* MP 200 Silane is an epoxy functional silane oligomer that may be considered for use as an adhesion promoter or binder in polysulfide, urethane, epoxy and acrylic caulks, sealants, adhesives and coatings. It typically aids adhesion promotion and crosslinking of waterborne or solvent based coatings as well as dispersion of metallic pigments in waterborne systems. voir moins | |
| COATOSIL* MP AQUEOUS PRETREATMENT SYSTEM | Momentive | COATOSIL* MP AQUEOUS PRETREATMENT is a two component aqueous pretreatment system for aluminum, cold rolled steel and hot dip galvanized steel substrates is composed of CoatOSil MP Y-15779 metal oxide sol and CoatOSil MP Y-15817 organofunctional alkoxysila...voir plus COATOSIL* MP AQUEOUS PRETREATMENT is a two component aqueous pretreatment system for aluminum, cold rolled steel and hot dip galvanized steel substrates is composed of CoatOSil MP Y-15779 metal oxide sol and CoatOSil MP Y-15817 organofunctional alkoxysilane. These two products are combined with deionized water or distilled water to give a dry-in-place pretreatment system. This water-based nanoscale pretreatment technology is not based on the use of chromium or phosphate and may be used for multi metal applications. voir moins | |
| COATOSIL* RESIN P 501 | Momentive | CoatOSil Resin P 501 is a medium-hard phenylmethyl silicone resin in solvent that can be used as a binder for anticorrosion coatings with thermal stability up to 600C. The main fields of application are the coating of machine components, fire doors, engin...voir plus CoatOSil Resin P 501 is a medium-hard phenylmethyl silicone resin in solvent that can be used as a binder for anticorrosion coatings with thermal stability up to 600C. The main fields of application are the coating of machine components, fire doors, engine manifolds, car exhaust silencers, drying units etc. These commonly use one-coat finishes. Systems of this kind are also applied for sealing spray-metallized surfaces. CoatOSil P 501 Resin can also be used for multi-coat finishing systems for industrial plant. voir moins | |
| COATOSIL* RESIN P 576 | Momentive | CoatOSil* Resin P 576 is a medium-hard high solid phenylmethyl silicone resin in solvent that can be used as a binder for anti-corrosion coatings with thermal stability up to 600C | |
| COATOSIL* RESIN P 851 | Momentive | CoatOsil* Resin P 851 is a phenylmethyl silicone resin in solvent that can be used as a binder for anti corrosion coatings, especially for primers iwth thermal stability up to 600C. | |
| CoatOSil* T-Cure Silane Oligomer | Momentive | CoatOSil* T-Cure Silane Oligomer may be useful in the development of coating formulations, such as Polyaspartic and 2K Polyurethane systems, where reactivity with a mercapto silane is desirable. This patented oligomer is low in odor compared to standard m...voir plus CoatOSil* T-Cure Silane Oligomer may be useful in the development of coating formulations, such as Polyaspartic and 2K Polyurethane systems, where reactivity with a mercapto silane is desirable. This patented oligomer is low in odor compared to standard mercapto silanes and can display a trio of reactive chemistries. In addition to thiol groups, silanol and diols are generated upon the hydrolysis of the silane. It behaves as a reactive diluent within a coating formulation, and is recommended for industrial maintenance applications, automotive, appliance, and coil applications; epoxy primers for metals and flooring, and aurospace and automotive refinishing applications. voir moins | |
| DISPEX® AA 4030 | BASF Formulation Additives | DISPEX® AA 4030 is an effective polymeric dispersing agent based on acrylic acid ammonium salt. | |
| DISPEX® AA 4040 | BASF Formulation Additives | DISPEX AA® 4040 is a standard dispersing agent for inorganic fillers and pigments; low polydispersity leading to efficient dispersing properties and liquefying effect. | |
| DISPEX® AA 4135 NA | BASF Formulation Additives | DISPEX® AA 4135 is an effective polymeric dispersing agent based on acrylic acid sodium salt. | |
| DISPEX® AA 4140 | BASF Formulation Additives | DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of ...voir plus DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of an acrylic polymer in water. This straw colored liquid is effective over a pH range 5-12 and up to temperatures in excess of 100°C. Compared with inorganic dispersing agents, e.g. polyphosphate products, the organic polymer based DISPEX® N40 provides improved storage stability of both the pigment dispersion and the formulated paint. There is little or no adverse reaction to high temperatures or pH changes. voir moins | |
| DISPEX® AA 4144 EB | BASF Formulation Additives | DISPEX® AA 4144 EB is a highly effective pigment dispersing aid for waterborne systems, even at low dosages. As a sole dispersant it does not require any auxiliary dispersant or wetting agent or polyphosphates. DISPEX® AA 4144 EB demonstrates excellent in...voir plus DISPEX® AA 4144 EB is a highly effective pigment dispersing aid for waterborne systems, even at low dosages. As a sole dispersant it does not require any auxiliary dispersant or wetting agent or polyphosphates. DISPEX® AA 4144 EB demonstrates excellent initial gloss retention and superior gloss retention after heat again. It shows exceptional compatibility with reactive pigments such as zinc oxide and with solvents like ethylene and propylene glycol. This permits the use in glycol based grinds or in pigment slurries. voir moins | |
| DISPEX® AA 4935 | BASF Formulation Additives | DISPEX® AA 4935 is a polymeric dispersing agent based on acrylic acid sodium salt in powder form. | |
| DISPEX® CX 4230 | BASF Formulation Additives | DISPEX® CX 4230 is a low VOC, low odor hydrophobic dispersant for interior and exterior architectural coatings. It is used to disperse titanium dioxide and extender pigments. It is added levels ranging from 1.05 to 3.0% based on pigment solids. | |
| DISPEX® CX 4240 | BASF Formulation Additives | DISPEX® CX 4240 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of an ammonium salt of an acrylic copolymer in...voir plus DISPEX® CX 4240 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of an ammonium salt of an acrylic copolymer in water. The copolymer is manufactured to a relatively narrow molecular weight distribution thus resulting in a consistent product quality with maximum effectiveness. The special copolymer backbone is designed for complete compatibility with polypropylene and hexylene glycols used in high proportions in water-borne high gloss coatings to promote wet edge time. voir moins | |
| DISPEX® CX 4320 | BASF Formulation Additives | DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersi...voir plus DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersing inorganic fillers and pigments in high gloss, semi-gloss and highly filled interior paints. It also improves wet-scrub resistance, blocking resistance and has excellent ZnO-compatibility. voir moins | |
| DISPEX® CX 4340 | BASF Formulation Additives | DISPEX® CX 4340 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of a sodium salt of an acrylic copolymer in wa...voir plus DISPEX® CX 4340 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of a sodium salt of an acrylic copolymer in water. The copolymer is manufactured to a relatively narrow molecular weight distribution thus resulting in a consistent product quality with maximum effectiveness. The special copolymer backbone is designed for complete compatibility with polypropylene and hexylene glycols used in high proportions in water-borne high gloss coatings to promote wet edge time. voir moins | |
| DISPEX® CX 4910 | BASF Formulation Additives | DISPEX® CX 4910 is a highly effective dispersing agent for systems, which are supplied as ‘dry systems’ and require addition of water for activation prior to their use. Typical applications examples are plasters, wall finishes, cement and tile adhesives. ...voir plus DISPEX® CX 4910 is a highly effective dispersing agent for systems, which are supplied as ‘dry systems’ and require addition of water for activation prior to their use. Typical applications examples are plasters, wall finishes, cement and tile adhesives. DISPEX® CX 4910 is a sodium salt of an acrylic polymer. For the production of systems, traded as ‘dry systems’, DISPEX® CX 4910 is typically incorporated into the dry powder mix by a normal dry blending operation. Upon wetting of such a ‘dry system’ a waterbased paste/slurry is generated. DISPEX® CX 4910 is effective over a pH range 5-12 and up to temperatures in excess of 100°C. voir moins | |
| DISPEX® Ultra FA 4404 | BASF Formulation Additives | DISPEX® Ultra FA 4404 is a partially neutralized chelating agent suitable for use in the manufacture of pigment suspensions, emulsion paints, slurries, mainly inorganic pigments, viscosity reducer. It combines the properties of a chelating agent and polyp...voir plus DISPEX® Ultra FA 4404 is a partially neutralized chelating agent suitable for use in the manufacture of pigment suspensions, emulsion paints, slurries, mainly inorganic pigments, viscosity reducer. It combines the properties of a chelating agent and polyphosphate with those of an organic dispersant thus yielding highly concentrated, stable and low-viscosity inorganic pigment suspensions, e. g. TiO2-slurries. voir moins | |
| DISPEX® Ultra FA 4416 | BASF Formulation Additives | DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-...voir plus DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-emulsions. With its excellent wetting properties, DISPEX® Ultra FA 4416 when used with inorganic and organic pigments produces a high gloss and good color development in low and co-solvent free systems. DISPEX® Ultra FA 4416 prevents rub-out effects by using critical pigment combinations, e.g. titanium dioxide / phthalo blue. It is suitable for air and oven drying coatings as well as baking coatings. Since DISPEX® Ultra FA 4416 has no effect on pot-life it is also recommended for aqueous 2 pack PUR coatings. It allows the formulation of economical inorganic slurries and pigment concentrates for emulsion paints and consumer coatings. Here it combines the advantages of a low paste-viscosity with anti-settling characteristics and excellent compatibility to all types of aqueous base-paints. voir moins | |
| DISPEX® Ultra FA 4420 | BASF Formulation Additives | DISPEX® Ultra FA 4420 is a fatty acid modified polyester that stabilizes inorganic and organic pigments in water and solvents. It provides maximum color development, higher pigment loading and optimum color acceptance. This product is used for universal c...voir plus DISPEX® Ultra FA 4420 is a fatty acid modified polyester that stabilizes inorganic and organic pigments in water and solvents. It provides maximum color development, higher pigment loading and optimum color acceptance. This product is used for universal colorants for decorative paints. When using universal colorants in decorative paints, the addition of DISPEX® Ultra FA 4420 to the base paints (water and solvent) can increase compatibility and color acceptance and prevents de-wetting of the colorants. DISPEX® Ultra FA 4420 is an activator for Bentonites as well as for associated and acrylic thickeners. voir moins | |
| DISPEX® Ultra FA 4425 | BASF Formulation Additives | DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints ...voir plus DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints into which they may be incorporated. This results in: maximum color development of the colorant based on DISPEX® Ultra FA 4425, optimum color acceptance of universal colorants in base-paints, and higher pigment loading in colorants. DISPEX® Ultra FA 4425, used as a single wetting and dispersing agent, is considered suitable for VOC-free applications, particularly universal colorants. When using universal colorants in decorative paints, the addition of DISPEX® Ultra FA 4425 to the base paints (water and solvent) can increase compatibility and color acceptance, especially in water-based and ultra-low aromatic content decorative paints. voir moins | |
| DISPEX® Ultra FA 4431 | BASF Formulation Additives | DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especia...voir plus DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especially suitable for wetting, dispersion and stabilization of inorganic pigments and fillers in solvent-free epoxy and polyurethane systems, like flooring or pipe-line coatings. DISPEX® Ultra FA 4431 can also be used to decrease the viscosity of water-based resin-free inorganic pigment concentrates, based on high molecular weight dispersing agents like DISPEX® Ultra PA 4550. In addition DISPEX® Ultra FA 4431 is suitable for dispersion and stabilization of inorganic pigments and fillers in water-based decorative paints based on acrylic emulsions, achieving a better rheology and improved gloss. voir moins | |
| DISPEX® Ultra FA 4437 | BASF Formulation Additives | DISPEX® Ultra FA 4437 is a silicone-free surface active flow additive and colour acceptance improver for aqueous systems based on emulsions and aqueous resins. Due to its good wetting properties DISPEX® Ultra FA 4437 ensures better wetting of difficult-to...voir plus DISPEX® Ultra FA 4437 is a silicone-free surface active flow additive and colour acceptance improver for aqueous systems based on emulsions and aqueous resins. Due to its good wetting properties DISPEX® Ultra FA 4437 ensures better wetting of difficult-to-wet substrates. The emulsifying effect of this product also prevents surface defects such as craters, fisheyes, pinholes and streaks caused by incompatible components. Furthermore, DISPEX® Ultra FA 4437 has a strong affinity to pigment surfaces thereby reducing color acceptance problems. voir moins | |
| DISPEX® Ultra FA 4480 | BASF Formulation Additives | DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra...voir plus DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra FA 4480 also provides outstanding flow properties even at high pigment load. In topcoats based on different binder types DISPEX® Ultra FA 4480 improves pigment wetting and therefore increases gloss and color intensity of the paint, especially in combination with organic pigments. This product also shows excellent results in waterbased alkyds, polyester resins as also in aqueous polyurethane emulsions. voir moins | |
| DISPEX® Ultra FA 4483 | BASF Formulation Additives | DISPEX® Ultra FA 4483 is an excellent low-VOC dispersing agent for inorganic pigments and be used to formulate APEO-free and glycol-free universal colorants. It offers excellent pigment stabilization, viscosity reduction, and wetting and dispersing proper...voir plus DISPEX® Ultra FA 4483 is an excellent low-VOC dispersing agent for inorganic pigments and be used to formulate APEO-free and glycol-free universal colorants. It offers excellent pigment stabilization, viscosity reduction, and wetting and dispersing properties. This allows improved stability and color intensity of pigment concentrates. voir moins | |
| DISPEX® Ultra PA 4503 | BASF Formulation Additives | DISPEX® Ultra PA 4503 is a dispersing resin with self-emulsifying properties. In combination with DISPEX® Ultra PA 4503, it is suitable for the production of VOC free pigment concentrates. The excellent compatibility of this combination with both water- a...voir plus DISPEX® Ultra PA 4503 is a dispersing resin with self-emulsifying properties. In combination with DISPEX® Ultra PA 4503, it is suitable for the production of VOC free pigment concentrates. The excellent compatibility of this combination with both water- and solvent-based decorative paint systems means these concentrates are suitable for the production of tinting systems where only low shear forces (shaking machines) are used. The chemical character of DISPEX® Ultra PA 4503 makes it suitable for systems with a wide pH range (5–12). voir moins | |
| DISPEX® Ultra PA 4510 | BASF Formulation Additives | DISPEX® Ultra PA 4510 is a modified polyacrylate that is recommended for use in all kinds of high quality waterborne industrial coatings. It can be used for both inorganic and organic pigments. This product is a high molecular weight dispersing agent for ...voir plus DISPEX® Ultra PA 4510 is a modified polyacrylate that is recommended for use in all kinds of high quality waterborne industrial coatings. It can be used for both inorganic and organic pigments. This product is a high molecular weight dispersing agent for both inorganic and organic pigments. It should be neutralized for use in aqueous coatings. Complete water solubility will be obtained by e.g. addition of 2.5% dimethylethanolamine which is equivalent to 75% neutralization of DISPEX® Ultra PA 4510. voir moins | |
| DISPEX® Ultra PA 4530 | BASF Formulation Additives | DISPEX® Ultra PA 4530 is a high molecular weight polymeric dispersant for deflocculation of pigments in solvent and aqueous coatings. It stabilizes the pigment dispersion of difficult inorganic and organic pigments. This product is a film-forming polymer ...voir plus DISPEX® Ultra PA 4530 is a high molecular weight polymeric dispersant for deflocculation of pigments in solvent and aqueous coatings. It stabilizes the pigment dispersion of difficult inorganic and organic pigments. This product is a film-forming polymer with excellent water resistance and wide-spread compatibility in both solvent- and water-based systems. Before being added to the mill base, DISPEX® Ultra PA 4530 should be neutralized up to pH 8.5–9.0. Complete water solubility will be obtained by, e.g., the addition of 8.5 % AMP-90™1. voir moins | |
| DISPEX® Ultra PA 4550 | BASF Formulation Additives | DISPEX® Ultra PA 4550 is a modified polyacrylate that stabilizes the pigment dispersion of inorganic and organic pigments and improves gloss, color strength, flocculation stability, and anti-flooding behavior. This product is used as a dispersing agent. D...voir plus DISPEX® Ultra PA 4550 is a modified polyacrylate that stabilizes the pigment dispersion of inorganic and organic pigments and improves gloss, color strength, flocculation stability, and anti-flooding behavior. This product is used as a dispersing agent. DISPEX® Ultra PA 4550 is pH-independent and has a broad compatibility in most commonly used water-based coatings. It is completely water-soluble and does not need to be neutralized. voir moins | |
| DISPEX® Ultra PA 4560 | BASF Formulation Additives | DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior...voir plus DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior. DISPEX® Ultra PA 4560 is, in combination with DISPEX® Ultra PA 4503, suitable to formulate VOC-free tinting concentrates for both water- and solvent-based decorative paints. These concentrates have excellent compatibility and can therefore be incorporated by the use of low shear forces (shaking machines). voir moins | |
| DISPEX® Ultra PA 4590 | BASF Formulation Additives | DISPEX® Ultra PA 4590 is ideal for water-based industrial and decorative coatings where cost-effective performance is vital; suitable for making universal colorants with good compatibility. | |
| DISPEX® Ultra PX 4275 | BASF Formulation Additives | DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 p...voir plus DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 pack PUR coating. This product has a low foaming tendency and to the best of our knowledge has no negative influence on the water and corrosion resistance. DISPEX® Ultra PX 4275 is used in combination with zinc oxid, an increase of viscosity may occur. voir moins | |
| DISPEX® Ultra PX 4290 | BASF Formulation Additives | DISPEX® Ultra PX 4290 is a novel high molecular weight dispersing agent for organic and inorganic pigments in aqueous coating systems, printing inks and adhesives. It offers excellent pigment stabilizing characteristics and outstanding color strength and ...voir plus DISPEX® Ultra PX 4290 is a novel high molecular weight dispersing agent for organic and inorganic pigments in aqueous coating systems, printing inks and adhesives. It offers excellent pigment stabilizing characteristics and outstanding color strength and viscosity reduction. This allows higher pigment loadings while excellent flow characteristics are maintained. voir moins | |
| DISPEX® Ultra PX 4525 | BASF Formulation Additives | DISPEX® Ultra PX 4525 is a high molecular weight, universal wetting and dispersing agent for a variety of pigments in both water- and solvent-based paint systems. It is based on a blend of amine- and acid- functional polymer technology and especially deve...voir plus DISPEX® Ultra PX 4525 is a high molecular weight, universal wetting and dispersing agent for a variety of pigments in both water- and solvent-based paint systems. It is based on a blend of amine- and acid- functional polymer technology and especially developed for label-free colorants. Because of its chemical nature, DISPEX® Ultra PX 4525 provides improved gloss development, excellent color intensity, and color acceptance in both polar and unpolar paint systems. voir moins | |
| DISPEX® Ultra PX 4575 | BASF Formulation Additives | DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra ...voir plus DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. voir moins | |
| DISPEX® Ultra PX 4585 | BASF Formulation Additives | DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low...voir plus DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4585 is especially suited for the dispersion of pigments in water-based coatings. DISPEX® Ultra PX 4585 offers high efficiency in stabilizing pigments and demonstrates wide compatibility with many water-based resin systems. This makes DISPEX® Ultra PX 4585 ideally suited for the use of the concept of resin-free pigment concentrates (RFPC). voir moins | |
| EFKA® FA 4600 | BASF Formulation Additives | EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in l...voir plus EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in low-viscosity coatings such as, e.g., dipping paints and wash-primers. This is possible even in the presence of specific high density pigments based on lead, chrome, barium, iron and titanium. In addition, the uniform electrostatic charge imparted by EFKA® FA 4600 prevents re-agglomeration thereby counteracting any premature settling of the pigments. EFKA® FA 4600 is an easy to use liquid anti-settling agent, the particular advantage of which is that it is effective over a broad range of polarity. It can, therefore, be used in a nitrocellulose lacquer, the solvents of which are mainly polar, as well as in decorative paints which only contain white spirit, i.e., a non-polar solvent. EFKA® FA 4600 is also an excellent anti-settling agent for low-viscosity printing inks, e.g., flexographic and gravure. In particular it counteracts the tendency of inorganic pigments to settle. voir moins | |
| EFKA® FA 4601 | BASF Formulation Additives | EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regardi...voir plus EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regarding interfacial activity. The mode of action of EFKA® FA 4601 systems results from the high surface activity of its constituents with almost all pigments. If processed properly, the individual pigment particles are coated with a monomolecular layer of adsorbed compounds which prevent agglomeration into larger particles, with the result that the fine particles remain in suspension and no caking occurs. This viscous liquid is a blend of selected fatty alcohol sulfates. EFKA® FA 4601 does not contain any alkali ions, and it is effective in most paints, provided they are not distinctly polar in their composition. voir moins | |
| EFKA® FA 4608 | BASF Formulation Additives | EFKA® FA 4608 is a clear to slightly hazy, brownish liquid low-molecular-weight dispersing agent. It is used as a wetting and dispersing additive for extenders and inorganic pigments, especially TiO2. It increases gloss as well as reduces dispersing time ...voir plus EFKA® FA 4608 is a clear to slightly hazy, brownish liquid low-molecular-weight dispersing agent. It is used as a wetting and dispersing additive for extenders and inorganic pigments, especially TiO2. It increases gloss as well as reduces dispersing time and the flooding of pigments. In white bases, EFKA® FA 4608 improves the color acceptance of tinting pastes, resulting in higher pigment efficiency. In addition, it will reduce flooding and floating in those bases. voir moins | |
| EFKA® FA 4609 | BASF Formulation Additives | EFKA® FA 4609 is a polymeric wetting and dispersing agent with acidic groups. It shows outstanding performance in dispersing and stabilizing inorganic pigments in particular titanium dioxide. In combination with a universal solvent based grinding resin li...voir plus EFKA® FA 4609 is a polymeric wetting and dispersing agent with acidic groups. It shows outstanding performance in dispersing and stabilizing inorganic pigments in particular titanium dioxide. In combination with a universal solvent based grinding resin like Laropal® A 81, low mill base viscosities with reduced pseudo plastic flow behavior can be achieved. Furthermore, EFKA® FA 4609 is highly suitable to disperse iron oxide pigments. This product is suitable for many coating systems, such as automotive OEM and refinish coatings, solvent-based industrial coatings, coil coatings, especially TiO2, and wood coatings. voir moins | |
| EFKA® FA 4611 | BASF Formulation Additives | EFKA® FA 4611 is a solvent-free dispersing agent, which shows excellent stabilization of inorganic pigments, notably TiO2. It achieves strong reduction in mill-base viscosity, even with high pigment and filler loadings, it demonstrates increased hiding po...voir plus EFKA® FA 4611 is a solvent-free dispersing agent, which shows excellent stabilization of inorganic pigments, notably TiO2. It achieves strong reduction in mill-base viscosity, even with high pigment and filler loadings, it demonstrates increased hiding power, and is suitable for high gloss systems. EFKA® FA 4611 is appropriate for solvent-based and solvent-free Industrial, OEM/Refinish, Automotive and Wood Coatings, Composites, and Printing Inks. voir moins | |
| EFKA® FA 4620 | BASF Formulation Additives | EFKA® FA 4620 helps to wet and disperse solid particles (e.g. CaCO3, ATH) in unsaturated polyester resin systems. This results in improved wetting and incorporation of fillers and extenders, reduced viscosity of the paste/compound, and increased filler an...voir plus EFKA® FA 4620 helps to wet and disperse solid particles (e.g. CaCO3, ATH) in unsaturated polyester resin systems. This results in improved wetting and incorporation of fillers and extenders, reduced viscosity of the paste/compound, and increased filler and extender loading. EFKA® FA 4620 is suited for filled unsaturated polyester systems (e.g. SMC/BMC, gel coats, car putties) or combinations with polystyrene, polyvinylacetate and styrene-butadiene copolymers (e.g. LS- or LP formulations). voir moins | |
| EFKA® FA 4642 | BASF Formulation Additives | EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not aff...voir plus EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. In the dispersion of organically treated Bentonites, the use of EFKA® FA 4642 shortens dispersion time, provides easier handling of the Bentonite gel, and improves storage stability. voir moins | |
| EFKA® FA 4644 | BASF Formulation Additives | EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigm...voir plus EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigment sedimentation, and increased gloss and improved flow. EFKA® FA 4644 is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. voir moins | |
| EFKA® FA 4654 | BASF Formulation Additives | EFKA® FA 4654 helps to prevent interfacial tension between the hydrophilic pigments/extenders and binder, forming a lattice structure with the pigments at the same time. This means: reduced dispersion time, stabilization of the pigment dispersion, reduced...voir plus EFKA® FA 4654 helps to prevent interfacial tension between the hydrophilic pigments/extenders and binder, forming a lattice structure with the pigments at the same time. This means: reduced dispersion time, stabilization of the pigment dispersion, reduced pigment sedimentation, reduced tendency to sag during application on vertical surfaces, and prevention of flooding. It is a high molecular weight carboxylic acid salts. EFKA® FA 4654 is ideal for dispersing organophilic bentonites, because it reduces dispersion time, improves the storage properties of the final paste and gives a thixotropic, easily processed paste product. It is especially suitable for non- to medium-polar binder systems, ie. air-dried alkyd resins, chlorinated polymers, alkyd/amino resin combinations and epoxies. EFKA® FA 4654 can cause discoloration in nitrocellulose varnishes. voir moins | |
| EFKA® FA 4663 | BASF Formulation Additives | EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of a...voir plus EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of an electroneutral salt of a polycarboxylic acid with amine derivatives dissolved in higher aromatics. EFKA® FA 4663 is an almost universally applicable additive for nonaqueous coatings. It has proved its value in particular in systems based on alkyd resins, alkyd/melamine resins, acrylic and epoxy resins,chlorinated rubber, linseed oil/stand oil, etc. If some linear binders which contain hydroxyl groups (e.g. Desmophen® types from Bayer)are used with our product, thixotropy can occur. voir moins | |
| EFKA® FA 4665 | BASF Formulation Additives | EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, s...voir plus EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, slightly brownish liquid is especially suitable for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane- and chlorinated polymer systems, acrylic polyisocyanate systems (2-pack acrylics), and chlorinated polymers. EFKA® FA 4665 is not compatible with white spirit or paints which are diluted with white spirit. voir moins | |
| EFKA® FA 4666 | BASF Formulation Additives | EFKA® FA 4666 is a high molecular weight unsaturated carboxylic acid that prevents interfacial tension between the hydrophilic pigments and the binder. This wetting and dispersing additive reduces dispersion time and pigment sedimentation, prevents floodi...voir plus EFKA® FA 4666 is a high molecular weight unsaturated carboxylic acid that prevents interfacial tension between the hydrophilic pigments and the binder. This wetting and dispersing additive reduces dispersion time and pigment sedimentation, prevents flooding/floating and stabilizes pigment dispersion. EFKA® FA 4666 is especially suited for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane systems, acrylic polyisocyanate systems (2-pack acrylics) and chlorinated polymers. voir moins | |
| EFKA® FA 4671 | BASF Formulation Additives | EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimen...voir plus EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimentation. This product is an alkylol ammonium salt of a high-molecular weight carboxylic acid. EFKA® FA 4671 is suitable for use in low or high-polarity solvent systems as well as water-based coatings. It is used to reduce flooding and settling in non-polar systems e.g. air drying alkyd paints. It is an effective anti-settling agent in wash and shop primers. It improves the color acceptance of tinting bases in white latex paints, resulting in higher pigment efficiency. voir moins | |
| EFKA® FL 3740 EH | BASF Formulation Additives | EFKA® FL 3740 is a levelling agent with air release properties for nonaqueous, liquid coating systems, as well as for powder coatings and binders for powder coatings. Due to its chemical structure, EFKA® FL 3740 modifies the surface tension of the coating...voir plus EFKA® FL 3740 is a levelling agent with air release properties for nonaqueous, liquid coating systems, as well as for powder coatings and binders for powder coatings. Due to its chemical structure, EFKA® FL 3740 modifies the surface tension of the coatings. It also eliminates or reduces cratering, fish-eyes and orange peel; improves the flow, dispersion and floating behaviour, prevents air entrapment and optimizes wetting of the substrate. EFKA® FL 3740 is also ideally suited to be used in the manufacture of powder coatings or binders for powder coatings. For the preparation of a master batch, it is recommended to use a mixing of 9 parts of polyester resin with 1 part EFKA® FL 3740. This mixture is perfectly suited for direct application in the premix and extrusion process after melting, homogenization, cooling and granulation. The drawbacks of leveling agents applied on SiO2 are avoided. In particular, pigmented and transparent powder coatings with excellent levelling properties are obtained for the production of weatherproof powder coatings. voir moins | |
| EFKA® FL 3745 | BASF Formulation Additives | EFKA® FL 3745 is a silicone-free levelling agent with air release properties for powder coatings. It can be used in liquid non-aqueous coatings as well as in powder coating. Due to its chemical structure EFKA® FL 3745 modifies the surface tension of powde...voir plus EFKA® FL 3745 is a silicone-free levelling agent with air release properties for powder coatings. It can be used in liquid non-aqueous coatings as well as in powder coating. Due to its chemical structure EFKA® FL 3745 modifies the surface tension of powder coatings. By formulating with this product, smooth trouble-free film surfaces will be obtained, generally with an improvement in gloss. This copolyacrylate is a clear, colorless liquid. voir moins | |
| EFKA® FL 3770 | BASF Formulation Additives | EFKA® FL 3770 is highly compatible with most solvent-based resins to act as an effective leveling agent, anti-cratering agent, and flow control agent with minimized effect on stabilizing foam. It is based on a fluoro-modified polyacrylate technology that ...voir plus EFKA® FL 3770 is highly compatible with most solvent-based resins to act as an effective leveling agent, anti-cratering agent, and flow control agent with minimized effect on stabilizing foam. It is based on a fluoro-modified polyacrylate technology that makes it excellent for most solvent-based industrial and wood coatings to improve the leveling of the dry film with no negative impact on recoatability. voir moins | |
| EFKA® FL 3778 | BASF Formulation Additives | EFKA® FL 3778 is an acrylic copolymer that improves leveling, prevents cratering, helps substrate wetting and does not interfere with intercoat adhesion. It is used for coil coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds and ai...voir plus EFKA® FL 3778 is an acrylic copolymer that improves leveling, prevents cratering, helps substrate wetting and does not interfere with intercoat adhesion. It is used for coil coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds and air-drying alkyd systems. voir moins | |
| EFKA® FL 3785 | BASF Formulation Additives | EFKA® FL 3785 is a modified polyacylate leveling agent for solvent-based systems without fluor or silicon modifications. It improves leveling, prevents cratering, significantly improves de-aeration and does not interfere with intercoat adhesion. EFKA® FL ...voir plus EFKA® FL 3785 is a modified polyacylate leveling agent for solvent-based systems without fluor or silicon modifications. It improves leveling, prevents cratering, significantly improves de-aeration and does not interfere with intercoat adhesion. EFKA® FL 3785 is especially suitable for coil coatings, two-pack epoxy or polyurethane coatings, baking enamels and gelcoats. For enhanced performance in coil and two-pack coatings, EFKA® FL 3785 can be combined with EFKA® FL 3600. Compared to fluorocarbon-modified acrylates or silicone leveling additives, EFKA® FL 3785 has less influence on surface tension and more effect on de-aeration. voir moins | |
| EFKA® IO 6782 | BASF Formulation Additives | EFKA® IO 6782 is a clear, yellowish liquid additive used to increase the conductivity of coating systems. This is especially important for electrostatically sprayed paints. This product can be used in most kinds of coating systems containing polar and non...voir plus EFKA® IO 6782 is a clear, yellowish liquid additive used to increase the conductivity of coating systems. This is especially important for electrostatically sprayed paints. This product can be used in most kinds of coating systems containing polar and non-polar solvents. In paints containing only white spirit, EFKA® IO 6782 should be prediluted with butanol at 1:1 or 1:2 proportions to improve efficiency by improving solubility and distribution. Since it is of cationic nature, compatibility with other parts of the recipe should be tested before use. Anionic components may react withEFKA® IO 6782 and thus reduce efficiency. voir moins | |
| EFKA® IO 6783 | BASF Formulation Additives | EFKA® IO 6783 is a conductivity promoter to adjust antistatic property of coatings and resistivity in liquid formulations to prevent static charge build-up or dust attraction during and after the drying process. | |
| EFKA® IO 6785 | BASF Formulation Additives | EFKA® IO 6785 is a conductivity promoter to adjust antistatic property of coatings and resistivity in liquid formulations to prevent static charge build-up or dust attraction during and after the drying process. | |
| EFKA® IO 6786 | BASF Formulation Additives | EFKA® IO 6786 is a conductivity promoter to adjust antistatic property of coatings and resistivity in liquid formulations to prevent static charge build-up or dust attraction during and after the drying process. | |
| EFKA® MI 6790 | BASF Formulation Additives | EFKA® MI 6790 are white to yellowish pearls used as a conductivity aid to prevent build up of direct current potentials during electrostatic powder spray coating. This allows, particularly with high direct current voltage, the output speed to be increased...voir plus EFKA® MI 6790 are white to yellowish pearls used as a conductivity aid to prevent build up of direct current potentials during electrostatic powder spray coating. This allows, particularly with high direct current voltage, the output speed to be increased and uniform thick coatings to be obtained, especially on object edges and ends. Furthermore it increases the throughput during powder production and improves substrate wetting. voir moins | |
| EFKA® PA 4400 | BASF Formulation Additives | EFKA® PA 4400 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all...voir plus EFKA® PA 4400 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all kinds of solvent borne coatings. EFKA® PA 4400 is an acrylic polymer with significant higher molecular weight compared with the EFKA® polyurethane-based polymeric dispersants. This gives better deflocculation of organic pigments. voir moins | |
| EFKA® PA 4401 | BASF Formulation Additives | EFKA® PA 4401 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems and higher color strength. This product is broadly compatible – from lo...voir plus EFKA® PA 4401 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems and higher color strength. This product is broadly compatible – from low- to high-polarity systems, including nitrocellulose. Care should be taken with EFKA® PA 4401 because of its tendency to yellowing and gelling when combined with chlorinated polymers. It also has a tendency to yellowing when combined with solvent-free epoxies. EFKA® PA 4401 is used for all kinds of high-quality solvent-based industrial coatings including automotive topcoats as well as pigment concentrates. voir moins | |
| EFKA® PA 4404 | BASF Formulation Additives | EFKA® PA 4404 is a high molecular weight, modified polyacrylate polymer-based dispersing agent suitable for solvent-based systems. It is specially used in coil coating applications and polyester / melamine stoving enamels while providing reduced residual ...voir plus EFKA® PA 4404 is a high molecular weight, modified polyacrylate polymer-based dispersing agent suitable for solvent-based systems. It is specially used in coil coating applications and polyester / melamine stoving enamels while providing reduced residual monomer content. voir moins | |
| EFKA® PA 4450 | BASF Formulation Additives | EFKA® PA 4450 is a polymeric dispersant for inorganic and organic pigments in non-aqueous, polar and non-polar coatings. This clear liquid avoids flocculation of pigments, increases color strength and also reduces grinding time. It is a carboxyl functiona...voir plus EFKA® PA 4450 is a polymeric dispersant for inorganic and organic pigments in non-aqueous, polar and non-polar coatings. This clear liquid avoids flocculation of pigments, increases color strength and also reduces grinding time. It is a carboxyl functional polymer that can be used in all systems independent from its polarity, e. g. alkyds, PE, acrylics. 2 - component polyurethane paints, 2 - component epoxy paints, unsaturated polyester. The application in systems with low polarity is possible as well. EFKA® PA 4450 is used in combination with all commonly used solvents. It shows good solubility even with isoparaffins, which makes it very useful for these systems. It also shows excellent performance when used as a dispersant in pigment pastes. voir moins | |
| EFKA® PB 2001 | BASF Formulation Additives | EFKA® PB 2001 is a silicone-free defoamer for non-aqueous coatings, printing inks, and especially for high viscous coatings based on 2-pack epoxy, unsaturated polyester, and PUR systems. It is a solution of vinyl polymer in organic solvents. EFKA® PB 2001...voir plus EFKA® PB 2001 is a silicone-free defoamer for non-aqueous coatings, printing inks, and especially for high viscous coatings based on 2-pack epoxy, unsaturated polyester, and PUR systems. It is a solution of vinyl polymer in organic solvents. EFKA® PB 2001 is used in nitrocellulose lacquers, particularly those applied on curtain coaters, 1- or 2-component acid curing wood coatings, particularly fast drying types applied on curtain coaters, acrylic resin finishes, air drying epoxy resin paints and unsaturated polyester. The paint industry uses defoamers to ensure that air bubbles occurring during application of lacquers and paints can escape from the film while still wet. The formation of craters is thus substantially eliminated. One must differentiate between: bubbles which originate from the substrate (wood and paper are typical examples), and bubbles which may be generated in the paint by pumping, rolling, airless spraying or curtain coating. voir moins | |
| EFKA® PB 2010 | BASF Formulation Additives | EFKA® PB 2010 is a silicone-free defoamer with good compatibility, intended to accelerate defoaming as well as to improve clarity in solvent-based coatings. It eliminates foaming and blistering regardless of whether the air bubbles are a result of the sub...voir plus EFKA® PB 2010 is a silicone-free defoamer with good compatibility, intended to accelerate defoaming as well as to improve clarity in solvent-based coatings. It eliminates foaming and blistering regardless of whether the air bubbles are a result of the substrate (e.g., wood or metal) or due to the application method (pumping, rolling, flooding or spraying). EFKA® PB 2010 performs well for a wide range of applications and is particularly suitable for clear coatings, without haziness, as well as providing high gloss if required. voir moins | |
| EFKA® PB 2018 AN | BASF Formulation Additives | EFKA® PB 2018 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers, and also prevents the entrapment of air during processing steps such as stirring, pumping etc. EFKA® PB 201...voir plus EFKA® PB 2018 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers, and also prevents the entrapment of air during processing steps such as stirring, pumping etc. EFKA® PB 2018 is especially suited for solvent-based wood finishes if foam formation is a problem when applied by spraying or curtain coating. It has very good compatibility properties which makes it extremely suitable for use in clear coatings. voir moins | |
| EFKA® PB 2020 | BASF Formulation Additives | EFKA® PB 2020 is a clear, slightly yellowish liquid that accelerates defoaming in solvent-based coatings. It therefore eliminates foaming and blistering, regardless of whether the air bubbles are caused by the substrate, e.g. wood or paper or as a result ...voir plus EFKA® PB 2020 is a clear, slightly yellowish liquid that accelerates defoaming in solvent-based coatings. It therefore eliminates foaming and blistering, regardless of whether the air bubbles are caused by the substrate, e.g. wood or paper or as a result of pumping, rolling, flooding or airless spraying. voir moins | |
| EFKA® PB 2021 | BASF Formulation Additives | EFKA® PB 2021 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. This product ...voir plus EFKA® PB 2021 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. This product helps to prevent surface irregularities to give the smoothest possible surface. EFKA® PB 2021 is especially suited for solvent-based coatings if foam formation is a problem when applied by spraying or curtain coating. voir moins | |
| EFKA® PB 2050 | BASF Formulation Additives | EFKA® PB 2050 a silicone-free defoamer for solvent-based systems. It is particularly effective for thermosetting resin systems used in composites, flooring and industrial coating applications. When applied to composites, it achieves fast de-aeration of po...voir plus EFKA® PB 2050 a silicone-free defoamer for solvent-based systems. It is particularly effective for thermosetting resin systems used in composites, flooring and industrial coating applications. When applied to composites, it achieves fast de-aeration of polyester and epoxy resin systems. This ensures the production of foam- and bubble-free compounds and parts. It can also improve leveling. voir moins | |
| EFKA® PB 2720 | BASF Formulation Additives | EFKA® PB 2720 supports the quick de-aeration of thermosetting resin systems. It can be used in pigmented or non-pigmented resin systems such as unsaturated polyesters, 2-pack epoxies, and PVC-compounds. | |
| EFKA® PB 2744 | BASF Formulation Additives | EFKA® PB 2744 is an ultra low VOC de-aerator providing excellent efficiency as well as long-term persistency and effectiveness against macro and micro-foam. Recommended for clear and pigmented resin systems, and compatible in high solids 2K polyurethane, ...voir plus EFKA® PB 2744 is an ultra low VOC de-aerator providing excellent efficiency as well as long-term persistency and effectiveness against macro and micro-foam. Recommended for clear and pigmented resin systems, and compatible in high solids 2K polyurethane, 2K epoxy and UV coatings. Especially suitable for high solids industrial flooring. voir moins | |
| EFKA® PB 2770 | BASF Formulation Additives | EFKA® PB 2770 is a silicone-free deaerator and defoamer for UV-curable formulations, composites, gel coats, cast resins and adhesives. The product provides an outstanding compatibility. It is recommended for use in clear and pigmented radiation curable fo...voir plus EFKA® PB 2770 is a silicone-free deaerator and defoamer for UV-curable formulations, composites, gel coats, cast resins and adhesives. The product provides an outstanding compatibility. It is recommended for use in clear and pigmented radiation curable formulations (e.g. overprint varnishes, UV inkjet) as well as for solvent-free unsaturated polyester systems and for pultrusion applications with acrylic, unsaturated polyester and vinylester resins. It is silicone-free and therefore provides excellent recoatability. voir moins | |
| EFKA® PL 5381 | BASF Formulation Additives | EFKA® PL 5381 is the standard type of an epoxy plasticizer. It has a good stabilizing effect and is largely extraction-resistant to cleaning materials and many industrial agents. Its migration resistance (also to polystyrene) is comparable with those of p...voir plus EFKA® PL 5381 is the standard type of an epoxy plasticizer. It has a good stabilizing effect and is largely extraction-resistant to cleaning materials and many industrial agents. Its migration resistance (also to polystyrene) is comparable with those of polymeric plasticizers. voir moins | |
| EFKA® PL 5382 | BASF Formulation Additives | EFKA® PL 5382 is an epoxy plasticizer for the paint industry. This light yellow liquid is made from epoxidized soybean oil. It protects paints and plastics against the influence of heat, light and weather, and thereby improves whiteness and resistance to ...voir plus EFKA® PL 5382 is an epoxy plasticizer for the paint industry. This light yellow liquid is made from epoxidized soybean oil. It protects paints and plastics against the influence of heat, light and weather, and thereby improves whiteness and resistance to ageing. It is compatible with PVC, many other plastics, synthetic resins, plasticizers and gives transparent films. It can be hardened with acids, anhydrides, and amines. Moreover, it remains stable even at higher temperatures. voir moins | |
| EFKA® PL 5646 | BASF Formulation Additives | EFKA® PL 5646 is a phthalate-free plasticizer for the use in PVC, coatings, inks and rubber especially for toxicological sensitive applications. It is also suitable as a VOC-free solvent / carrier in various applications. It has a boiling point of ~394°C ...voir plus EFKA® PL 5646 is a phthalate-free plasticizer for the use in PVC, coatings, inks and rubber especially for toxicological sensitive applications. It is also suitable as a VOC-free solvent / carrier in various applications. It has a boiling point of ~394°C and is a solvent for ceramic inkjet. voir moins | |
| EFKA® PU 4009 | BASF Formulation Additives | EFKA® PU 4009 is a clear, slightly yellowish liquid polymeric dispersant for stabilizing inorganic and organic pigments. This results in reduced dispersing time, improved gloss, higher color strength, and the prevention of flooding and floating problems. ...voir plus EFKA® PU 4009 is a clear, slightly yellowish liquid polymeric dispersant for stabilizing inorganic and organic pigments. This results in reduced dispersing time, improved gloss, higher color strength, and the prevention of flooding and floating problems. EFKA® PU 4009 was developed for use in universal solvent-based pigment concentrates, particularly where cost-effective performance is vital. It can also be used as a general dispersing agent for all solvent based paints from high-performance industrial coatings to normal decorative paints. voir moins | |
| EFKA® PU 4010 | BASF Formulation Additives | EFKA® PU 4010 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in: reduced grinding time, impr...voir plus EFKA® PU 4010 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in: reduced grinding time, improved gloss, prevention of flooding and floating problems and higher color strength. Due to its particularly good combination of price and performance, EFKA® PU 4010 is a very attractive substitute for conventional wetting and dispersing agents. It is possible to mix combinations of inorganic pigments stabilized with EFKA® PU 4010 and organic pigments stabilized with other EFKA® highmolecular-weight polymeric dispersants. voir moins | |
| EFKA® PU 4015 | BASF Formulation Additives | EFKA® PU 4015 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic and organic pigments with strong viscosity depressing properties. This results in: improved gloss, reduced flooding problems, higher color st...voir plus EFKA® PU 4015 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic and organic pigments with strong viscosity depressing properties. This results in: improved gloss, reduced flooding problems, higher color strength, lower viscosity and higher pigment loads. Due to its particularly good combination of price and performance, EFKA® PU 4015 is a very attractive substitute for conventional wetting and dispersing agents. voir moins | |
| EFKA® PU 4020 | BASF Formulation Additives | EFKA® PU 4020 is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in reduced grinding time, improved gloss, prevention of flooding and floating p...voir plus EFKA® PU 4020 is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in reduced grinding time, improved gloss, prevention of flooding and floating problems, and higher color strength. Due to its particularly good combination of price and performance, EFKA® PU 4020 is a very attractive substitute for conventional wetting and dispersing agents. It is possible to mix combinations of inorganic pigments stabilized with EFKA® PU 4020 and organic pigments stabilized with other EFKA® highmolecular-weight polymeric dispersants. voir moins |
