| Razeen® 6138 | Jubail Chemical Industries Co. | Razeen® 6138 is a semi-solid phenol novolac based multifunctional epoxy resin. This product is characterized by its viscosity and its ability to improve the chemical resistance and mechanical properties in end products. Razeen® 6138 is used in marine and ...voir plus Razeen® 6138 is a semi-solid phenol novolac based multifunctional epoxy resin. This product is characterized by its viscosity and its ability to improve the chemical resistance and mechanical properties in end products. Razeen® 6138 is used in marine and protective coatings, chemical resistant coatings, adhesives, and coil coatings. voir moins | |
| Razeen® LR 1100 | Jubail Chemical Industries Co. | Razeen® LR 1100 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its viscosity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1100 is used in the formulation of highly chemical ...voir plus Razeen® LR 1100 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its viscosity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1100 is used in the formulation of highly chemical resistant coatings and matrix adhesives. voir moins | |
| Razeen® LR 1110 | Jubail Chemical Industries Co. | Razeen® LR 1110 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1110 is used in the formulation of...voir plus Razeen® LR 1110 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1110 is used in the formulation of electro-deposition primers used in the automotive industry, as well as the production of UV cure epoxy acrylates. voir moins | |
| Razeen® LR 1120 | Jubail Chemical Industries Co. | Razeen® LR 1120 is an unmodified epoxy resin based on Bisphenol A. This product is characterized by its very low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1120 is used in the formulation of high solid...voir plus Razeen® LR 1120 is an unmodified epoxy resin based on Bisphenol A. This product is characterized by its very low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1120 is used in the formulation of high solids chemical resistant coatings, matrix adhesives, and UV cur epoxy acrylates. voir moins | |
| Razeen® LR 1140-B | Jubail Chemical Industries Co. | Razeen® LR 1140-B is an unmodified epoxy resin based on Bisphenol A. This product is characterized by its very low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1140-B is used in the formulation of high s...voir plus Razeen® LR 1140-B is an unmodified epoxy resin based on Bisphenol A. This product is characterized by its very low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1140-B is used in the formulation of high solids chemical resistant coatings, matrix adhesives, and UV cur epoxy acrylates. voir moins | |
| Razeen® LR 1150 | Jubail Chemical Industries Co. | Razeen® LR 1150 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Razeen® LR 1150 is used in the formulation of solvent-free coating...voir plus Razeen® LR 1150 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Razeen® LR 1150 is used in the formulation of solvent-free coatings. voir moins | |
| Razeen® LR 1160 | Jubail Chemical Industries Co. | Razeen® LR 1160 is a liquid, unmodified, medium to high viscosity epoxy resin based on Bisphenol A. This product is characterized by its extremely low chlorine content. Razeen® LR 1160 is used in the formulation of automotive body coatings. | |
| Razeen® LR 1166 | Jubail Chemical Industries Co. | Razeen® LR 1166 is a general purpose, low viscosity epoxy resin based on Bisphenol A. This product is characterized by its extremely low chlorine content. Razeen® LR 1166 is used in the formulation of automotive body coatings. | |
| Razeen® LR 1170 | Jubail Chemical Industries Co. | Razeen® LR 1170 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Razeen® LR 1170 is used in the formulation of solvent-free coating...voir plus Razeen® LR 1170 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Razeen® LR 1170 is used in the formulation of solvent-free coatings. voir moins | |
| Razeen® LR 2253 | Jubail Chemical Industries Co. | Razeen® LR 2253 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic diglycidyl ether. This product is characterized by its reactivity, surface hardness, flexibility, solvent resistance, and alkali resistance. Razeen® LR 2253 is ...voir plus Razeen® LR 2253 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic diglycidyl ether. This product is characterized by its reactivity, surface hardness, flexibility, solvent resistance, and alkali resistance. Razeen® LR 2253 is used in the formulation of solvent-free coatings. voir moins | |
| Razeen® LR 2254 | Jubail Chemical Industries Co. | Razeen® LR 2254 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic monoglycidyl ether. This product is characterized by its diluting properties. Razeen® LR 2254 is used in the formulation of solvent-free coatings and structural...voir plus Razeen® LR 2254 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic monoglycidyl ether. This product is characterized by its diluting properties. Razeen® LR 2254 is used in the formulation of solvent-free coatings and structural adhesives. voir moins | |
| Razeen® LR 2257 | Jubail Chemical Industries Co. | Razeen® LR 2257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical performance, surface penetration, and its resistance to chemicals, acid, a...voir plus Razeen® LR 2257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical performance, surface penetration, and its resistance to chemicals, acid, and solvents. Razeen® LR 2257 is used in the formulation of solvent-free coatings and structural adhesives. voir moins | |
| Razeen® LR 2280 | Jubail Chemical Industries Co. | Razeen® LR 2280 is a high viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and chemical resistance. Razeen® LR 2280 is used in the formulation of anti-corrosion coatings, spray applied seal...voir plus Razeen® LR 2280 is a high viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and chemical resistance. Razeen® LR 2280 is used in the formulation of anti-corrosion coatings, spray applied sealer lacquers, and primers and finishing paints for metal substrates. voir moins | |
| Razeen® LR 2282 | Jubail Chemical Industries Co. | Razeen® LR 2282 is a liquid, general purpose, unmodified epoxy resin based on Bisphenol F . This product is characterized by its viscosity, reactivity, compatibility, and low hydrolysable chlorine content. Razeen® LR 2282 is used in chemical resistant coa...voir plus Razeen® LR 2282 is a liquid, general purpose, unmodified epoxy resin based on Bisphenol F . This product is characterized by its viscosity, reactivity, compatibility, and low hydrolysable chlorine content. Razeen® LR 2282 is used in chemical resistant coatings and matrix adhesives. voir moins | |
| Razeen® LR 2302 | Jubail Chemical Industries Co. | Razeen® LR 2302 is a liquid epoxy resin based on Bisphenol A/F . This product is characterized by its viscosity and low shrinkage of cure films as well as its ability to improve mechanical properties and chemical resistance in end products. Razeen® LR 230...voir plus Razeen® LR 2302 is a liquid epoxy resin based on Bisphenol A/F . This product is characterized by its viscosity and low shrinkage of cure films as well as its ability to improve mechanical properties and chemical resistance in end products. Razeen® LR 2302 is used in solvent-free coatings, high solids coatings, and protective coatings. voir moins | |
| Razeen® LR 2308 | Jubail Chemical Industries Co. | Razeen® LR 2308 is a hydrogenated Bisphenol A based cycloaliphatic epoxy resin. This product is characterized by its UV resistance. It has an epoxy equivalent weight of 230-260 and a denisty of 1.14. Razeen® LR 2308 is used in outdoor applications, mainte...voir plus Razeen® LR 2308 is a hydrogenated Bisphenol A based cycloaliphatic epoxy resin. This product is characterized by its UV resistance. It has an epoxy equivalent weight of 230-260 and a denisty of 1.14. Razeen® LR 2308 is used in outdoor applications, maintenance coatings, decorative paints, and acrylic finishes. voir moins | |
| Razeen® LR 2310 | Jubail Chemical Industries Co. | Razeen® LR 2310 is a hydrogenated Bisphenol A based cycloaliphatic epoxy resin. This product is characterized by its UV resistance. It has an epoxy equivalent weight of 130-150 and a denisty of 1.17. Razeen® LR 2310 is used in outdoor applications, mainte...voir plus Razeen® LR 2310 is a hydrogenated Bisphenol A based cycloaliphatic epoxy resin. This product is characterized by its UV resistance. It has an epoxy equivalent weight of 130-150 and a denisty of 1.17. Razeen® LR 2310 is used in outdoor applications, maintenance coatings, decorative paints, and acrylic finishes. voir moins | |
| Razeen® LR 2350 | Jubail Chemical Industries Co. | Razeen® LR 2350 is a general purpose, modified epoxy resin based on Bisphenol A and F. This product is characterized by its ability to improve chemical resistance and mechanical properties in end products. Razeen® LR 2350 is used in solvent-free coatings. | |
| Razeen® LR 2351 | Jubail Chemical Industries Co. | Razeen® LR 2351 is a general purpose, modified epoxy resin based on Bisphenol A and Bisphenol F. This product is characterized by its mechanical properties and chemical resistance. Razeen® LR 2351 is used in the formulation of solvent-free coatings. | |
| Razeen® LR 2352 | Jubail Chemical Industries Co. | Razeen® LR 2352 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its adhesion properties. It has an epoxy equivalent weight of 170-185 and a denisty of 1.17. Razeen® LR 2352 is used in solvent-free and high solids coati...voir plus Razeen® LR 2352 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its adhesion properties. It has an epoxy equivalent weight of 170-185 and a denisty of 1.17. Razeen® LR 2352 is used in solvent-free and high solids coatings. voir moins | |
| Razeen® LR 2740 | Jubail Chemical Industries Co. | Razeen® LR 2740 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity and that is modified with mono-functional reactive diluent. It has an epoxy equivalent weight of 190-210 and a denisty of 1.14. Razeen® LR 2...voir plus Razeen® LR 2740 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity and that is modified with mono-functional reactive diluent. It has an epoxy equivalent weight of 190-210 and a denisty of 1.14. Razeen® LR 2740 is used in high solids coatings and adhesives. voir moins | |
| Razeen® LR 2783 | Jubail Chemical Industries Co. | Razeen® LR 2783 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity, processing properties, mechanical properties, surface penetration, and chemical resistance. Razeen® LR 2783 is used in solvent-free coating...voir plus Razeen® LR 2783 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity, processing properties, mechanical properties, surface penetration, and chemical resistance. Razeen® LR 2783 is used in solvent-free coatings and structural adhesives. voir moins | |
| Razeen® LR 2810 | Jubail Chemical Industries Co. | Razeen® LR 2810 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity, reactivity, surface hardness, flexibility, organic solvent resistance, and alkali resistance. Razeen® LR 2810 is used in solvent-free coati...voir plus Razeen® LR 2810 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity, reactivity, surface hardness, flexibility, organic solvent resistance, and alkali resistance. Razeen® LR 2810 is used in solvent-free coatings and structural adhesives. voir moins | |
| Razeen® S 7103 | Jubail Chemical Industries Co. | Razeen® S 7103 is a bi-functional aliphatic reactive diluent based on Propylenglycol diglycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 320-450 and a density of 1.04...voir plus Razeen® S 7103 is a bi-functional aliphatic reactive diluent based on Propylenglycol diglycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 320-450 and a density of 1.04. Razeen® S 7103 is used in epoxy resin systems. voir moins | |
| Razeen® S 7105 | Jubail Chemical Industries Co. | Razeen® S 7105 is a mono-functional aliphatic reactive diluent based on ortho cresyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 175-190 and a density of 1.06. ...voir plus Razeen® S 7105 is a mono-functional aliphatic reactive diluent based on ortho cresyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 175-190 and a density of 1.06. Razeen® S 7105 is used in epoxy resin systems. voir moins | |
| Razeen® S 7106 | Jubail Chemical Industries Co. | Razeen® S 7106 is a mono-functional aliphatic reactive diluent based on C12-C14 alkyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 300-340 and a density of .89. ...voir plus Razeen® S 7106 is a mono-functional aliphatic reactive diluent based on C12-C14 alkyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 300-340 and a density of .89. Razeen® S 7106 is used in epoxy resin systems. voir moins | |
| Razeen® S 7106 HP | Jubail Chemical Industries Co. | Razeen® S 7106 HP is a mono-functional aliphatic reactive diluent based on high purity C12-C14 alkyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 270-305 and a d...voir plus Razeen® S 7106 HP is a mono-functional aliphatic reactive diluent based on high purity C12-C14 alkyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 270-305 and a density of .89. Razeen® S 7106 HP is used in epoxy resin systems. voir moins | |
| Razeen® S 7107 | Jubail Chemical Industries Co. | Razeen® S 7107 is a reactive diluent based on 1.4-butane diol diglycidyl ether. This product is characterized by its ability to increase the strength of end products. It has an epoxy equivalent weight of 130-145 and a density of 1.1. Razeen® S 7107 is use...voir plus Razeen® S 7107 is a reactive diluent based on 1.4-butane diol diglycidyl ether. This product is characterized by its ability to increase the strength of end products. It has an epoxy equivalent weight of 130-145 and a density of 1.1. Razeen® S 7107 is used in epoxy resin systems. voir moins | |
| Razeen® S 7109 | Jubail Chemical Industries Co. | Razeen® S 7109 is an aliphatic di-functional reactive diluent based on 1.6-hexanediol diglycidyl ether. This product is characterized by its ability to increase the strength and flexibility of end products. It has an epoxy equivalent weight of 150-170 and...voir plus Razeen® S 7109 is an aliphatic di-functional reactive diluent based on 1.6-hexanediol diglycidyl ether. This product is characterized by its ability to increase the strength and flexibility of end products. It has an epoxy equivalent weight of 150-170 and a density of 1.06. Razeen® S 7109 is used in epoxy resin systems. voir moins | |
| Razeen® S 93513 | Jubail Chemical Industries Co. | Razeen® S 93513 is a novel mono-functional reactive diluent. This product is characterized by its ability to increase the flexibility of end products. It has an epoxy equivalent weight of 424-575 and a density of 8.17. Razeen® S 93513 is used in solvent-f...voir plus Razeen® S 93513 is a novel mono-functional reactive diluent. This product is characterized by its ability to increase the flexibility of end products. It has an epoxy equivalent weight of 424-575 and a density of 8.17. Razeen® S 93513 is used in solvent-free coatings, high solids coatings, marine coatings, industrial coatings, and coatings that come in contact with potable water. voir moins | |
| Razeen® SL 2290 X 90 | Jubail Chemical Industries Co. | Razeen® SL 2290 X 90 is a semi-solid, modified epoxy resin based on Bisphenol A as a solvent cut in 90% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Razeen® SL 2290 X 90 ...voir plus Razeen® SL 2290 X 90 is a semi-solid, modified epoxy resin based on Bisphenol A as a solvent cut in 90% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Razeen® SL 2290 X 90 is used in the formulation of primers applied on metal substrates. voir moins | |
| Razeen® SL 2711W57 | Jubail Chemical Industries Co. | Razeen® SL 2711W57 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its viscosity and compatibility with a wide variety of different end product formulations. Razeen® SL 2711W57 is used in chemical resist...voir plus Razeen® SL 2711W57 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its viscosity and compatibility with a wide variety of different end product formulations. Razeen® SL 2711W57 is used in chemical resistant coatings and matrix adhesives. voir moins | |
| Razeen® SL 2733W67 | Jubail Chemical Industries Co. | Razeen® SL 2733W67 is an emulsion of an epoxy resin based on Bisphenol A/F supplied at 67% solids content. This product is characterized by its viscosity, stability, processing properties, mechanical properties, surface penetration, and chemical resistanc...voir plus Razeen® SL 2733W67 is an emulsion of an epoxy resin based on Bisphenol A/F supplied at 67% solids content. This product is characterized by its viscosity, stability, processing properties, mechanical properties, surface penetration, and chemical resistance. Razeen® SL 2733W67 is used in water-based paints and enamels. voir moins | |
| Razeen® SL 4071 X 75 | Jubail Chemical Industries Co. | Razeen® SL 4071 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve the mechanical and electrical properties in end products. Razeen® SL 4071 X 75 is us...voir plus Razeen® SL 4071 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve the mechanical and electrical properties in end products. Razeen® SL 4071 X 75 is used in the formulation of acrylic resin systems, marine maintenance, and protective coatings applications. voir moins | |
| Razeen® SL 4072 X 75 | Jubail Chemical Industries Co. | Razeen® SL 4072 X 75 is a typical type 2 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance....voir plus Razeen® SL 4072 X 75 is a typical type 2 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance. Razeen® SL 4072 X 75 is used in the formulation of primers, anti-corrosive primers, zinc rich primers, top coats, clear lacquers, and quick dry floor coatings. voir moins | |
| Razeen® SL 4150 X 90 | Jubail Chemical Industries Co. | Razeen® SL 4150 X 90 is a semi-solid epoxy resin based on Bisphenol A as a solvent cut 90% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Razeen® SL 4150 X 90 is used in th...voir plus Razeen® SL 4150 X 90 is a semi-solid epoxy resin based on Bisphenol A as a solvent cut 90% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Razeen® SL 4150 X 90 is used in the formulation of primers and finishing paints applied on metal substrates and in high solids coatings. voir moins | |
| Razeen® SL 4171 X 75 | Jubail Chemical Industries Co. | Razeen® SL 4171 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance....voir plus Razeen® SL 4171 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance. Razeen® SL 4171 X 75 is used in the formulation of primers, anti-corrosive primers, zinc rich primers, top coats, clear lacquers, and quick dry floor coatings. voir moins | |
| Razeen® SR 5004 | Jubail Chemical Industries Co. | Razeen® SR 5004 is a solid medium molecular weight epoxy resin based on Bisphenol A. This product is characterized by its melt viscosity, storage stability, gloss, and mechanical properties. Razeen® SR 5004 has a softening point value of 95 - 106 °C and i...voir plus Razeen® SR 5004 is a solid medium molecular weight epoxy resin based on Bisphenol A. This product is characterized by its melt viscosity, storage stability, gloss, and mechanical properties. Razeen® SR 5004 has a softening point value of 95 - 106 °C and is designed for use the formulation of powder coatings. voir moins | |
| Razeen® SR 5013 | Jubail Chemical Industries Co. | Razeen® SR 5013 is a solid unmodified epoxy resin based on Bisphenol A. This product is characterized by it adhesion properties, gloss, mechanical properties, filler loading, and corrosion resistance. Razeen® SR 5013 has a softening point value of 85 - 92...voir plus Razeen® SR 5013 is a solid unmodified epoxy resin based on Bisphenol A. This product is characterized by it adhesion properties, gloss, mechanical properties, filler loading, and corrosion resistance. Razeen® SR 5013 has a softening point value of 85 - 92 °C and is designed for use in high general industrial coatings and decorative coatings for metal furniture. voir moins | |
| Razeen® SR 5014 | Jubail Chemical Industries Co. | Razeen® SR 5014 is a solid, unmodified epoxy resin based on Bisphenol A. Razeen® SR 5014 is a fast reacting, medium melt viscosity solid epoxy resin designed for high performance powder coatings including hybrids. It is for use in coatings of complicated ...voir plus Razeen® SR 5014 is a solid, unmodified epoxy resin based on Bisphenol A. Razeen® SR 5014 is a fast reacting, medium melt viscosity solid epoxy resin designed for high performance powder coatings including hybrids. It is for use in coatings of complicated metal objects, e.g., wire mesh, coil springs, spinning bobbins, steel furniture, tube and pipe coatings voir moins | |
| Razeen® SR 5071 | Jubail Chemical Industries Co. | Razeen® SR 5071 is a low melting solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion resist...voir plus Razeen® SR 5071 is a low melting solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion resistance. Razeen® SR 5071 has a softening point value of 77 - 82 °C is designed for use in the formulation of protective and decorative coatings systems such as maintenance coatings, interior pipe coatings, zinc rich primers, marine finishes, floor finishes, and concrete coatings. voir moins | |
| Razeen® SR 5071 Flake | Jubail Chemical Industries Co. | Razeen® SR 5071 Flake is a low melting solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion ...voir plus Razeen® SR 5071 Flake is a low melting solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion resistance. Razeen® SR 5071 comes in a flake form with a softening point value of 77 - 82 °C and is designed for use in the formulation of protective and decorative coatings systems such as maintenance coatings, interior pipe coatings, zinc rich primers, marine finishes, floor finishes, and concrete coatings. voir moins | |
| Razeen® SR 5072 | Jubail Chemical Industries Co. | Razeen® SR 5072 is a solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion resistance. Razeen...voir plus Razeen® SR 5072 is a solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion resistance. Razeen® SR 5072 has a softening point value of 82 - 90 °C and is designed for use in high performance coating systems. voir moins | |
| Razeen® SR 5074 | Jubail Chemical Industries Co. | Razeen® SR 5074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its melt viscosity, mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Razeen® SR 5074 is designed for use ...voir plus Razeen® SR 5074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its melt viscosity, mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Razeen® SR 5074 is designed for use in the formulation of functional powder coating systems including pipe and rebar applications. voir moins | |
| Razeen® SR 5084 | Jubail Chemical Industries Co. | Razeen® SR 5084 is a solid, medium molecular weight epoxy resin based on Bisphenol A. This product is characterized by its ability to take on different properties depending on what it's combined with. Razeen® SR 5084 is designed for use in solvent-contain...voir plus Razeen® SR 5084 is a solid, medium molecular weight epoxy resin based on Bisphenol A. This product is characterized by its ability to take on different properties depending on what it's combined with. Razeen® SR 5084 is designed for use in solvent-containing coatings when combined with fatty acids and powder coatings when combined with certain curing agents. voir moins | |
| Razeen® SR 5097 | Jubail Chemical Industries Co. | Razeen® SR 5097 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flow, wetting properties, gloss, adhesion properties, sterilization performance, and flexibility, as well as its resistance to chemicals, solvent...voir plus Razeen® SR 5097 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flow, wetting properties, gloss, adhesion properties, sterilization performance, and flexibility, as well as its resistance to chemicals, solvents, water, and corrosion. Razeen® SR 5097 is used in metal decorative finishes, can and coil coatings, drum and tank linings, application primers and enamels, metal furniture finishes, and primers. voir moins | |
| Razeen® SR 5143 | Jubail Chemical Industries Co. | Razeen® SR 5143 is a solid epoxy resin based on Bisphenol A. This product is characterized by its flow properties, overbake stability, substrate wetting, and pigment wetting. Razeen® SR 5143 is designed for use in the formulation of polyester-rich hybrid ...voir plus Razeen® SR 5143 is a solid epoxy resin based on Bisphenol A. This product is characterized by its flow properties, overbake stability, substrate wetting, and pigment wetting. Razeen® SR 5143 is designed for use in the formulation of polyester-rich hybrid powder coatings and systems where exceptional flow is required. voir moins | |
| Razeen® SR 5174 | Jubail Chemical Industries Co. | Razeen® SR 5174 is a solid epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loading. Razeen® SR 5174 is designed for use in th...voir plus Razeen® SR 5174 is a solid epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loading. Razeen® SR 5174 is designed for use in the formulation of general industrial coatings and decorative coatings for metal furniture. voir moins | |
| Razeen® SR 5184 | Jubail Chemical Industries Co. | Razeen® SR 5184 is a solid, medium molecular weight epoxy resin based on Bisphenol A. This product is characterized by its ability to take on different properties depending on what it's combined with. Razeen® SR 5184 is designed for use in solvent-contain...voir plus Razeen® SR 5184 is a solid, medium molecular weight epoxy resin based on Bisphenol A. This product is characterized by its ability to take on different properties depending on what it's combined with. Razeen® SR 5184 is designed for use in solvent-containing coatings when combined with fatty acids and powder coatings when combined with certain curing agents. voir moins | |
| Razeen® SR 5197 | Jubail Chemical Industries Co. | Razeen® SR 5197 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flow, wetting properties, gloss, adhesion properties, sterilization performance, and flexibility, as well as its resistance to chemicals, solvent...voir plus Razeen® SR 5197 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flow, wetting properties, gloss, adhesion properties, sterilization performance, and flexibility, as well as its resistance to chemicals, solvents, water, and corrosion. Razeen® SR 5197 is used in metal decorative finishes, can and coil coatings, drum and tank linings, application primers and enamels, metal furniture finishes, and primers as well as in powder coatings for tube and pipe coatings. voir moins | |
| Razeen® SR 5198 | Jubail Chemical Industries Co. | Razeen® SR 5198 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact resistance, and chemical resistance. Razeen® SR 5198 is used in the formulation for baking primers and enamels ...voir plus Razeen® SR 5198 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact resistance, and chemical resistance. Razeen® SR 5198 is used in the formulation for baking primers and enamels as well as cold-curing coatings. voir moins | |
| Razeen® SR 5199 | Jubail Chemical Industries Co. | Razeen® SR 5199 is a high molecular weight, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact strength, and chemical resistance. Razeen® SR 5199 is used in the formulation of heat-curing primers and enam...voir plus Razeen® SR 5199 is a high molecular weight, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact strength, and chemical resistance. Razeen® SR 5199 is used in the formulation of heat-curing primers and enamels as well as anti-corrosive paints. voir moins | |
| Razeen® SR 5274 | Jubail Chemical Industries Co. | Razeen® SR 5274 is a solid flow agent master batch. This product is used to facilitate the incorporation of a liquid flow agent in powder coatings. Razeen® SR 5274 is designed for use in the formulation of powder coatings whose flow properties are require...voir plus Razeen® SR 5274 is a solid flow agent master batch. This product is used to facilitate the incorporation of a liquid flow agent in powder coatings. Razeen® SR 5274 is designed for use in the formulation of powder coatings whose flow properties are required to meet high demands. voir moins | |
| Razeen® SR 5284 | Jubail Chemical Industries Co. | Razeen® SR 5284 is a solid epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Razeen® SR 5284 is designed for use in the formulation of h...voir plus Razeen® SR 5284 is a solid epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Razeen® SR 5284 is designed for use in the formulation of high performance coatings systems. voir moins | |
| Razeen® SR 5334 | Jubail Chemical Industries Co. | Razeen® SR 5334 is a high flow, solid epoxy resin based on Bisphenol A. This product is characterized by its low melt viscosity and softening point. Razeen® SR 5334 is designed for use in the formulation of thin film hybrid powder coatings. | |
| Razeen® SR 5357 | Jubail Chemical Industries Co. | Razeen® SR 5357 is a solid epoxy resin based on Bisphenol A and Novolac. This product is characterized by its temperature cure, electrical properties, corrosion resistance, chemical resistance, heat resistance, edge coverage, and adhesion. Razeen® SR 5357...voir plus Razeen® SR 5357 is a solid epoxy resin based on Bisphenol A and Novolac. This product is characterized by its temperature cure, electrical properties, corrosion resistance, chemical resistance, heat resistance, edge coverage, and adhesion. Razeen® SR 5357 is used in powder coatings for products in which increasing the corrosion and chemical resistance is necessary. voir moins | |
| Razeentint PB 15:4 | Jubail Chemical Industries Co. | Razeentint PB 15:4 is a blue tinting paste formulated with organic and inorganic pigments with a viscosity of 4,000-10,000. This product is used to color solvent-free and water-based epoxy systems as well as adhesives. | |
| Razeentint PB 7 | Jubail Chemical Industries Co. | Razeentint PB 7 is a black tinting paste formulated with organic and inorganic pigments with a viscosity of 5,000-12,000. This product is used to color solvent-free and water-based epoxy systems as well as adhesives. | |
| Razeentint PG 7 | Jubail Chemical Industries Co. | Razeentint PG 7 is a green tinting paste formulated with organic and inorganic pigments with a viscosity of 6,000-12,000. This product is used to color solvent-free and water-based epoxy systems as well as adhesives. | |
| Razeentint PR 101 | Jubail Chemical Industries Co. | Razeentint PR 101 is a red tinting paste formulated with organic and inorganic pigments with a viscosity of 8,000-13,000. This product is used to color solvent-free and water-based epoxy systems as well as adhesives. | |
| Razeentint PY 42 | Jubail Chemical Industries Co. | Razeentint PY 42 is a yellow tinting paste formulated with organic and inorganic pigments with a viscosity of 1,000-3,000. This product is used to color solvent-free and water-based epoxy systems as well as adhesives. | |
| STANLUX® Gold 12000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...voir plus STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 12000 is available in several shades and has an average size of 16 microns. voir moins | |
| STANLUX® Gold 13000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13...voir plus STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13000 is available in several shades and has an average size of 16 microns. voir moins | |
| STANLUX® Gold 13300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...voir plus STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 13300 is available in several shades and has an average size of 12 microns. voir moins | |
| STANLUX® Gold 14000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 i...voir plus STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 is available in several shades and has an average size of 5 microns. voir moins | |
| STANLUX® Gold 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...voir plus STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2000 is available in several shades and has an average size of 50 microns. voir moins | |
| STANLUX® Gold 2100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...voir plus STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2100 is available in several shades and has an average size of 50 microns. voir moins | |
| STANLUX® Gold 2700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...voir plus STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2700 is available in several shades and has an average size of 45 microns. voir moins | |
| STANLUX® Gold 2800 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...voir plus STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2800 is available in several shades and has an average size of 45 microns. voir moins | |
| STANLUX® Gold 3500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...voir plus STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3500 is available in several shades and has an average size of 35 microns. voir moins | |
| STANLUX® Gold 3600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...voir plus STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3600 is available in several shades and has an average size of 35 microns. voir moins | |
| STANLUX® Gold 4500 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...voir plus STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 3.4 - 4.2 (cm²/g Min) water coverage property. voir moins | |
| STANLUX® Gold 4500 (Shade D) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is rec...voir plus STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 30 microns and a 8% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. voir moins | |
| STANLUX® Gold 4500 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...voir plus STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 4.3-5.4 (cm²/g Min) water coverage property. voir moins | |
| STANLUX® Gold 4600 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...voir plus STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. voir moins | |
| STANLUX® Gold 4600 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...voir plus STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 4.3 - 5.4 (cm²/g Min) water coverage property. voir moins | |
| STANLUX® Gold 5500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...voir plus STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 5500 is available in several shades and has an average size of 23 microns. It possesses a 0.5% water retention rate with a 4.2 - 6.0 (cm²/g Min) water coverage property. voir moins | |
| STANLUX® Gold 6500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...voir plus STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 6500 is available in several shades and has an average size of 20 microns. It possesses a 5% water retention rate with a 5.5 - 6.5 (cm²/g Min) water coverage property. voir moins | |
| STANLUX® Gold 7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...voir plus STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 7500 is available in several shades and has an average size of 18 microns. It possesses a 0.8% water retention rate with a 6.3 - 7.5 (cm²/g Min) water coverage property. voir moins | |
| STANLUX® Hydro 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 140 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 1% in # 325 mesh. | |
| STANLUX® Hydro 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 150 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 4% in # 325 mesh. | |
| STANLUX® Paste 100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and ...voir plus STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance and general industrial paints. voir moins | |
| STANLUX® Paste 100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance,...voir plus STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective, or marine coatings. voir moins | |
| STANLUX® Paste 1100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation...voir plus STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) voir moins | |
| STANLUX® Paste 1100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulatio...voir plus STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses High Aromatic solvent. voir moins | |
| STANLUX® Paste 1120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation ...voir plus STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 17 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) voir moins | |
| STANLUX® Paste 1130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in ...voir plus STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in decorative paints, industrial paints, maintenance, protective and marine coatings, and trade paints. It has an average particle size of 11 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) voir moins | |
| STANLUX® Paste 120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial...voir plus STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 17 microns and a minimum water coverage of 20,000 cm2/g. voir moins | |
| STANLUX® Paste 1200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1200 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1200 has a high degree of hiding power and is ...voir plus STANLUX® Paste 1200 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1200 has a high degree of hiding power and is recommended for use in internal can coatings. It has an average particle size of 14 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) voir moins | |
| STANLUX® Paste 1290 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1290 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1290 has a high degree of hiding power an...voir plus STANLUX® Paste 1290 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1290 has a high degree of hiding power and is recommended for use in internal can coatings. It has an average particle size of 8 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) voir moins | |
| STANLUX® Paste 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial ...voir plus STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. voir moins | |
| STANLUX® Paste 130N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for applic...voir plus STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. voir moins | |
| STANLUX® Paste 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in for...voir plus STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. voir moins | |
| STANLUX® Paste 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 150 is a leafing type aluminum paste made of medium-coarse lamellar particles covered with stearic acid. STANLUX® Paste 150 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commo...voir plus STANLUX® Paste 150 is a leafing type aluminum paste made of medium-coarse lamellar particles covered with stearic acid. STANLUX® Paste 150 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for industrial paints, and roof coatings. It has an average particle size of 19 microns and a minimum water coverage of 14,000 cm2/g. voir moins | |
| STANLUX® Paste 1600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is...voir plus STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is recommended for paint formulations that require aluminium pigment with high metallic effect including: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. It has an average particle size of 23 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) voir moins | |
| STANLUX® Paste 1600N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and ...voir plus STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 23 microns and uses a HA (High Aromatic) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. voir moins | |
| STANLUX® Paste 166 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paint...voir plus STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, industrial paints, and trade paints. It has an average particle size of 15 microns and a minimum water coverage of 22,000cm2/g. voir moins | |
| STANLUX® Paste 1700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is...voir plus STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. voir moins | |
| STANLUX® Paste 1770 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level...voir plus STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. voir moins | |
| STANLUX® Paste 1770/60 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard...voir plus STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. STANLUX® Paste 1770/60 has the same characteristics of Stanlux Paste 1770 with 60% of solids. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. voir moins |
