| Grilonit® Epoxide 8 | EMS-CHEMIE AG (PRIMID) | Grilonit® Epoxide 8 is a C12/C14-alkyl glycidyl ether formulated to provide low toxicity and vapor pressure, good diluting power, and reduced reactivity. This product is used in reducing system viscosity and enhancing properties for civil engineering and ...voir plus Grilonit® Epoxide 8 is a C12/C14-alkyl glycidyl ether formulated to provide low toxicity and vapor pressure, good diluting power, and reduced reactivity. This product is used in reducing system viscosity and enhancing properties for civil engineering and construction applications. voir moins | |
| Grilonit® F 704 | EMS-CHEMIE AG (PRIMID) | Grilonit® F 704 is a polypropyleneglycol diglycidyl ether formulated as a flexibilizer that provides low toxicity and vapor pressure, reduced reactivity, and limited diluting power. This product is used in reducing system viscosity and enhancing propertie...voir plus Grilonit® F 704 is a polypropyleneglycol diglycidyl ether formulated as a flexibilizer that provides low toxicity and vapor pressure, reduced reactivity, and limited diluting power. This product is used in reducing system viscosity and enhancing properties for civil engineering and construction applications. voir moins | |
| Grilonit® H 81016 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 81016 is a phenol free Mannichbase hardener formulated to provide fast and/or low temperature curing for wet and cold substrates. This product is used as a curing agent in liquid epoxy resins. | |
| Grilonit® H 82044 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 82044 is a modified cycloaliphatic polyamine low viscous universal hardener for solvent-free coatings. It has a low yellowing tendency and low sensitivity to water. This product is used as a curing agent in liquid epoxy resins. | |
| Grilonit® H 82062 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 82062 is a modified cycloaliphatic polyamine low viscous universal hardener for solvent-free coatings. It has a short pot life, and after full cure a low sensitivity to water. This product is used as a curing agent in liquid epoxy resins. | |
| Grilonit® H 84024 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 84024 is a modified cycloaliphatic polyamine adduct curing agent. It has good intercoat adhesion, tack and carbamate free surface, and good chemical resistance. This product is used as a high viscous amine hardener for solvent free coatings, c...voir plus Grilonit® H 84024 is a modified cycloaliphatic polyamine adduct curing agent. It has good intercoat adhesion, tack and carbamate free surface, and good chemical resistance. This product is used as a high viscous amine hardener for solvent free coatings, curing with liquid epoxy resins. voir moins | |
| Grilonit® H 84026 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 84026 is an isolated EDA adduct in xylene/butanol/propylene glycol methyl ether 50:35:15 curing agent type, medium viscous hardener formulated to provide good intercoat adhesion and good chemical resistance. This product is used as a curing ag...voir plus Grilonit® H 84026 is an isolated EDA adduct in xylene/butanol/propylene glycol methyl ether 50:35:15 curing agent type, medium viscous hardener formulated to provide good intercoat adhesion and good chemical resistance. This product is used as a curing agent with liquid epoxy resins. voir moins | |
| Grilonit® H 84043 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 84043 is a modified cycloaliphatic polyamine adduct that has good flow properties, low carbamate tendency, and low yellowing tendency. This product is used as a slow amine for self-levelling mortars. | |
| Grilonit® P 6835 | EMS-CHEMIE AG (PRIMID) | Grilonit® P 6835 is a thermoplastic modified co-polyamide additive that has improved abrasion resistance, enhanced slip coverage, and improved edge coverage. This product is used to produce nylon modified polyester and hybrid powder coatings. | |
| Grilonit® RV 1806 | EMS-CHEMIE AG (PRIMID) | Grilonit® RV 1806 is a 1,4-butane diglycidyl ether reactive diluent formulated to provide good reactivity at low temperatures, good solvent resistance, high mechanical strength, and limited acid resistance. This product is used in reducing system viscosit...voir plus Grilonit® RV 1806 is a 1,4-butane diglycidyl ether reactive diluent formulated to provide good reactivity at low temperatures, good solvent resistance, high mechanical strength, and limited acid resistance. This product is used in reducing system viscosity and enhancing properties for civil engineering and construction applications. voir moins | |
| Grilonit® RV 1807.41 | EMS-CHEMIE AG (PRIMID) | Grilonit® RV 1807.41 is a 2-ethylhexyl glycidyl ether formulated to provide good diluting effect and a higher vapor pressure. This product is used to reduce system viscosity and enhancing properties for civil engineering and construction applications. | |
| Grilonit® RV 1812 | EMS-CHEMIE AG (PRIMID) | Grilonit® RV 1812 is a 1,6-hexane diglycidyl ether formulated to provide good reactivity at low temperatures, good solvent resistance, high mechanical strength, and limited acid resistance. This product is used to reduce system viscosity and enhancing pro...voir plus Grilonit® RV 1812 is a 1,6-hexane diglycidyl ether formulated to provide good reactivity at low temperatures, good solvent resistance, high mechanical strength, and limited acid resistance. This product is used to reduce system viscosity and enhancing properties for civil engineering and construction applications. voir moins | |
| Grilonit® RV 1814 | EMS-CHEMIE AG (PRIMID) | Grilonit® RV 1814 is a C13/C15-alkyl glycidyl ether formulated to provide low toxicity and vapor pressure, good wetting and air release behavior, good diluting power, and reduced reactivity. This product is used in reducing system viscosity and enhancing ...voir plus Grilonit® RV 1814 is a C13/C15-alkyl glycidyl ether formulated to provide low toxicity and vapor pressure, good wetting and air release behavior, good diluting power, and reduced reactivity. This product is used in reducing system viscosity and enhancing properties for civil engineering and construction applications. voir moins | |
| Grilonit® V-68-39 | EMS-CHEMIE AG (PRIMID) | Grilonit® V-68-39 is a high performance matting wax that is formulated to provide good gloss reduction, good flow, and enhanced mar and scratch resistance. This product used for matte finish powder coats. | |
| Grilonit® V51-31 | EMS-CHEMIE AG (PRIMID) | Grilonit® V51-31 is a trimethylolpropane triglycidyl ether formulated to provide good mechanical strength and reactivity, hot water and solvent resistance, and limited diluting power. This product is used in reducing system viscosity and enhancing propert...voir plus Grilonit® V51-31 is a trimethylolpropane triglycidyl ether formulated to provide good mechanical strength and reactivity, hot water and solvent resistance, and limited diluting power. This product is used in reducing system viscosity and enhancing properties for civil engineering and construction applications. voir moins | |
| Griltex® 11A | EMS-CHEMIE AG (PRIMID) | Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a...voir plus Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 1A | EMS-CHEMIE AG (PRIMID) | Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...voir plus Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 2A | EMS-CHEMIE AG (PRIMID) | Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...voir plus Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 2A S | EMS-CHEMIE AG (PRIMID) | Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination ...voir plus Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 6E | EMS-CHEMIE AG (PRIMID) | Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...voir plus Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 8E | EMS-CHEMIE AG (PRIMID) | Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...voir plus Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 9E | EMS-CHEMIE AG (PRIMID) | Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...voir plus Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is well used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CE 20 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...voir plus Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CE 21 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 21 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...voir plus Griltex® CE 21 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 160-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CE 22 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 22 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...voir plus Griltex® CE 22 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CT 100 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 100 is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle ...voir plus Griltex® CT 100 is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CT 101 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 210-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CT 102 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 102 is a polyphenylamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various parti...voir plus Griltex® CT 102 is a polyphenylamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1260A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1260A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It h...voir plus Griltex® D 1260A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has good steam and dry cleaning resistance. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1299A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1299A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, non-wovens, apparel materials and non-textile substrates. It is available in granule form in various pa...voir plus Griltex® D 1299A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, non-wovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1309E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1309E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1309E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-210°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1377E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1377E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1377E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a lamination temperature of 170-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1442E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1442E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1442E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 190-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1500A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1500A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1500A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 150-170°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1519E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1519E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 1519E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1523A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1523A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1523A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 210-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1539E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1539E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1539E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 140-170°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1541A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1541A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1541A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1549A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1549A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...voir plus Griltex® D 1549A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 180-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1556A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1556A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1556A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1566A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1566A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...voir plus Griltex® D 1566A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1582E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1582E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1582E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 120-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1595E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1595E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 1595E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1616E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1616E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 1616E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1619E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1619E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 1619E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 210-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1655E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1655E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1655E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 200-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1662A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1662A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...voir plus Griltex® D 1662A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1666A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1666A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...voir plus Griltex® D 1666A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 140-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1682E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1682E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1682E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1694A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1694A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1694A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1709A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1709A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1709A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1796A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1796A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1796A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1841E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1841E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1841E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 210-230°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1939E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1939E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 1939E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 190-230°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2132E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2132E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 2132E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a lamination temperature of 110-140°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2275E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2275E is a flame retardant copolyester-MB thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It has a FR additive and can be used to ble...voir plus Griltex® D 2275E is a flame retardant copolyester-MB thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It has a FR additive and can be used to blend with other copolyesters to provide flame retardant properties. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2315E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2315E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 2315E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 170-210°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2338E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2338E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 2338E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 210-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2427E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2427E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 2427E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 120-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2490A | EMS-CHEMIE AG (PRIMID) | Griltex® D 2490A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 2490A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2500E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2500E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 2500E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 170-210°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Primid® QM-1260 | EMS-CHEMIE AG (PRIMID) | Primid® QM-1260 is an improved hydroxyalkylamide crosslinker formulated for protective finishes on metal surfaces. This product is well suited for use in high color direct-fired powder coats. | |
| Primid® SF-4510 | EMS-CHEMIE AG (PRIMID) | Primid® SF-4510 is a hydroxyalkylamide crosslinker formulated for protective finishes on metal surfaces. This product is well suited for use in high gloss powder coatings as well as applications were good outgassing properties are required. | |
| Primid® XL-552 | EMS-CHEMIE AG (PRIMID) | Primid® XL-552 is a beta-hydroxyalkylamide crosslinker formulated for protective finishes on metal surfaces. This product is well suited for use in exterior weather resistant powder coats. | |
| Cenomic™ 1 | Bühler AG | Cenomic™ 1 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...voir plus Cenomic™ 1 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. voir moins |  |
| Cenomic™ 15 | Bühler AG | Cenomic™ 15 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler ...voir plus Cenomic™ 15 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. voir moins |  |
| Cenomic™ 3 | Bühler AG | Cenomic™ 3 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...voir plus Cenomic™ 3 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. voir moins |  |
| Cenomic™ 6 | Bühler AG | Cenomic™ 6 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...voir plus Cenomic™ 6 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. voir moins |  |
| MacroMedia™ | Bühler AG | MacroMedia™ is unique to the market because of its combination of a high-performance pump and small-volume grinding unit. Thanks to improved process control in the pre-grinding stage, fluctuating raw-material qualities can be balanced out and uniform prop...voir plus MacroMedia™ is unique to the market because of its combination of a high-performance pump and small-volume grinding unit. Thanks to improved process control in the pre-grinding stage, fluctuating raw-material qualities can be balanced out and uniform properties achieved for the pre-ground intermediate products. This produces optimum results in fine grinding and consequently increases the quality of the end product. At the same time, the system reduces production costs due to an improved material yield and optimized energy efficiency compared with other pre-grinding solutions. voir moins |  |
| MicroMedia™ L | Bühler AG | MicroMedia™ L is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMe...voir plus MicroMedia™ L is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. voir moins |  |
| MicroMedia™ L-C | Bühler AG | MicroMedia™ L-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micro...voir plus MicroMedia™ L-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. voir moins |  |
| MicroMedia™ P1-C | Bühler AG | MicroMedia™ P1-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micr...voir plus MicroMedia™ P1-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. voir moins |  |
| MicroMedia™ P2-C | Bühler AG | MicroMedia™ P2-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micr...voir plus MicroMedia™ P2-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. voir moins |  |
| MicroMedia™ X1 | Bühler AG | MicroMedia™ X1 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...voir plus MicroMedia™ X1 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. voir moins |  |
| MicroMedia™ X2 | Bühler AG | MicroMedia™ X2 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...voir plus MicroMedia™ X2 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. voir moins |  |
| MicroMedia™ X3 | Bühler AG | MicroMedia™ X3 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...voir plus MicroMedia™ X3 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. voir moins |  |
| MicroMedia™ X4 | Bühler AG | MicroMedia™ X4 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...voir plus MicroMedia™ X4 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. voir moins |  |
| PML 2 | Bühler AG | The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true gr...voir plus The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true grinding applications, metal-free dispersion of electronic materials or nano applications – the PML 2 is the right solution. voir moins |  |
| Trias™ 300 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...voir plus Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. voir moins |  |
| Trias™ 600 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...voir plus Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. voir moins |  |
| Trias™ 800 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...voir plus Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. voir moins |  |
| Trinomic™ 1300 | Bühler AG | Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative...voir plus Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative paints, toners, coatings and lubricants, but also for materials for the cosmetics industries. The three-roll mill is designed for meeting high quality demands and at the same time enables convenient, easy operation and quick cleaning voir moins |  |
| Trinomic™ 600 | Bühler AG | Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative...voir plus Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative paints, toners, coatings and lubricants, but also for materials for the cosmetics industries. The three-roll mill is designed for meeting high quality demands and at the same time enables convenient, easy operation and quick cleaning voir moins |  |
