| Acrylic Tannin Stain-blocking Primer with Busan® 11-M1 | Buckman Laboratories, Inc. | This formulation uses Busan® 11-M1 with other Buckman products to create an acrylic tannin stain-blocking primer. | |
| Bubond® 396 | Buckman Laboratories, Inc. | Bubond® 396 is an organic stain-blocking agent in liquid form. It is used in coatings that are applied over staining woods, such as cedar and redwood. By preventing wood extractives from bleeding through the paint films, Bubond® 396 reduces discoloration ...voir plus Bubond® 396 is an organic stain-blocking agent in liquid form. It is used in coatings that are applied over staining woods, such as cedar and redwood. By preventing wood extractives from bleeding through the paint films, Bubond® 396 reduces discoloration commonly known as “tannin staining.” Bubond® 396 can be post added to the coating or added in the letdown. In formulations that are pH-adjusted to the alkaline side, Bubond® 396 should preferably be added prior to neutralization since the product is acidic in nature and could cause pH shock if added directly into an alkaline system. voir moins | |
| Bubreak® 448 | Buckman Laboratories, Inc. | Bubreak® 448 is an antifoam and defoamer for use in water-thinned paints and coatings, glues, polyester spray and gel coatings. It is composed of substances that have been allowed for use under 21 CFR § 175.105 (Adhesives), 175.300 (Resinous and polymeric...voir plus Bubreak® 448 is an antifoam and defoamer for use in water-thinned paints and coatings, glues, polyester spray and gel coatings. It is composed of substances that have been allowed for use under 21 CFR § 175.105 (Adhesives), 175.300 (Resinous and polymeric coatings), and 176.200 (Defoaming agents used in coatings) of the U.S. Food and Drug Administration regulations. Bubreak® 448 can be dispensed directly from shipping containers by chemical-metering pumps or suitable measuring containers. To prevent deterioration of the product, keep drum closed when not in use. Contamination with water or other extraneous materials should be avoided. For the best control of foam, Bubreak® 448 should be added as near to the point of foam formation as possible. It should also be added where there is vigorous mixing action. voir moins | |
| Busperse® 39 | Buckman Laboratories, Inc. | Busperse® 39 is a high solids, anionic dispersant used in water-based paints and pigment slurries. It is effective at very low concentrations and does not require the use of additional dispersants or wetting agents during the pigment-grinding stage. Buspe...voir plus Busperse® 39 is a high solids, anionic dispersant used in water-based paints and pigment slurries. It is effective at very low concentrations and does not require the use of additional dispersants or wetting agents during the pigment-grinding stage. Busperse® 39 also provides excellent viscosity stability when using reactive pigments. It exhibits good color acceptance, is low foaming, and is not corrosive. Busperse® 39 has good compatibility with glycols and is therefore well-suited for use in gloss latex paint formulations. This product is a translucent, pale yellow liquid. voir moins | |
| Busan® 11-M1 | Buckman Laboratories, Inc. | Busan® 11-M1 is a multifunctional pigment for protection against corrosion, tannin staining, and UV light. This product is also an effective fire retardant and is used extensively to enhance the long-term performance and durability of paints. Busan® 11-M1...voir plus Busan® 11-M1 is a multifunctional pigment for protection against corrosion, tannin staining, and UV light. This product is also an effective fire retardant and is used extensively to enhance the long-term performance and durability of paints. Busan® 11-M1 is the commercial form of modified barium metaborate monohydrate. It is 90+% active calculated as BaB2O4 H2O. voir moins |
