Acti-Gel® 208 purified attapulgite is a high quality, self-dispersing hydrated magnesium aluminosilicate intended for high performance use as a binder, thixotrope, reinforcement additive and anti-settling agent. This unique formulary tool suspends and hom...voir plus
Acti-Gel® 208 purified attapulgite is a high quality, self-dispersing hydrated magnesium aluminosilicate intended for high performance use as a binder, thixotrope, reinforcement additive and anti-settling agent. This unique formulary tool suspends and homogeneously disperses other particles in liquid systems creating a very stable mixture yet enables higher loadings of solids without increasing viscosity. Acti-Gel 208 additive can be a simple fix for syneresis, pigment float & flooding and sedimentation problems in a wide range of water-based coatings. Its low dosage, and extremely low residue makes it a quick “post-add” solution for stability problems in existing coating formulas without changing its rheology, paint formula or packaging label. voir moins
Acti-Min® PG air-float kaolin is a carefully produced, high quality, pigment extender designed for the paint industry. It provides desirable performance advantages in gloss and sheen control, enamel holdout, anti-settling, and sanding properties. As our h...voir plus
Acti-Min® PG air-float kaolin is a carefully produced, high quality, pigment extender designed for the paint industry. It provides desirable performance advantages in gloss and sheen control, enamel holdout, anti-settling, and sanding properties. As our highest brightness product, Acti-Min® PG product can be a lbs-for-lbs direct replacement for higher cost water-washed kaolin products in coatings and similar applications. Its very fine and narrow particle size distribution in the 0.25 to 0.4 micron range has shown to be more effective at TiO2 extension in latex paint than standard water-washed kaolin grades. voir moins
AnTec C-60, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to improve brightness. It can be used as an extende...voir plus
AnTec C-60, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to improve brightness. It can be used as an extender in paints and coatings. voir moins
AnTec C-98, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by controlled heat treatment in order to remove crystalline-bound hydroxyl groups and in order to improve brightness. It can be used as a f...voir plus
AnTec C-98, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by controlled heat treatment in order to remove crystalline-bound hydroxyl groups and in order to improve brightness. It can be used as a functional pigment extender in coatings, paints, and printing inks. voir moins
AnTec C-OP, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to remove brightness. It can be used in flat or low...voir plus
AnTec C-OP, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to remove brightness. It can be used in flat or low-sheen architectural paints. It can also serve as an ink receptacle in specialty paper applications. voir moins
AnTec MM, in the form of a highly pulverized powder, is a high-reactivity metakaolin Pozzolan. This product can be used as an admixture in mortars and grouts, as well as in concrete masonry units or other cement-based products. Its specific gravity lies...voir plus
AnTec MM, in the form of a highly pulverized powder, is a high-reactivity metakaolin Pozzolan. This product can be used as an admixture in mortars and grouts, as well as in concrete masonry units or other cement-based products. Its specific gravity lies between 2.5 and 2.7, and it contains less than .5% free moisture. voir moins
AnTec WE, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups. It can be used as an extender for pigment applications. ...voir plus
AnTec WE, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups. It can be used as an extender for pigment applications. It contains less than 0.5% free moisture at 105 degrees Celsius. voir moins
GR-100F is an odorless, translucent flake of thermosetting polysiloxane resin, soluble in polar and aromatic solvents such as: alcohols (isopropanol, N-propanol, butanol and diacetone alcohol), ketones and the glycol ethers and their acetates. It is nonfl...voir plus
GR-100F is an odorless, translucent flake of thermosetting polysiloxane resin, soluble in polar and aromatic solvents such as: alcohols (isopropanol, N-propanol, butanol and diacetone alcohol), ketones and the glycol ethers and their acetates. It is nonflammable and exhibits good chemical resistance and dielectric strength, making it useful for a binder in flame-proof, filled coatings and microelectronic and fiber optic coatings. voir moins
GR-150F is an odorless, translucent flake of thermosetting polysiloxane resin, soluble in polar and aromatic solvents such as: alcohols (isopropanol, N-propanol, butanol and diacetone alcohol), ketones and the glycol ethers and their acetates. it can be u...voir plus
GR-150F is an odorless, translucent flake of thermosetting polysiloxane resin, soluble in polar and aromatic solvents such as: alcohols (isopropanol, N-propanol, butanol and diacetone alcohol), ketones and the glycol ethers and their acetates. it can be used as a binder for filled and clear top coats which call for service temperatures between 200 °C and 300 °C (392 °F to 572 °F). It also exhibits good chemical resistance and dielectric strength, for applications as a coating for microelectronic components. voir moins
GR-650F is an odorless, translucent flake of thermosetting polysiloxane resin, soluble in polar solvents such as: alcohols (isopropanol, N-propanol, butanol and diacetone alcohol), ketones and the glycol ethers and their acetates. It is suitable for use a...voir plus
GR-650F is an odorless, translucent flake of thermosetting polysiloxane resin, soluble in polar solvents such as: alcohols (isopropanol, N-propanol, butanol and diacetone alcohol), ketones and the glycol ethers and their acetates. It is suitable for use as a binder for flame-proof, filled coatings and microelectronic and fiber optic coatings; optically clear, abrasion resistant coatings for lenses and applications requiring a thermal operating temperature from 250 °C to 300 °C (482 °F to 572 °F). voir moins
GR-651L is a clear, colorless liquid with vinous odor. It is comprised of 35% solids in a butanol-ethanol solvent. It is also soluble in polar solvents such as: alcohols (isopropanol, N-propanol, butanol and diacetone alcohol), ketones and the glycol ethe...voir plus
GR-651L is a clear, colorless liquid with vinous odor. It is comprised of 35% solids in a butanol-ethanol solvent. It is also soluble in polar solvents such as: alcohols (isopropanol, N-propanol, butanol and diacetone alcohol), ketones and the glycol ethers and their acetates. It is suitable for use as an optically clear, abrasion resistant coatings for lenses and applications requiring good chemical resistance, weatherability and enhanced light transmission. voir moins
GR-653L is a clear liquid with slight color and a vinous odor. It is comprised of 30% solids in a butanol-ethanol solvent. It is also soluble in polar solvents such as: alcohols (isopropanol, N-propanol, butanol and diacetone alcohol), ketones and the gly...voir plus
GR-653L is a clear liquid with slight color and a vinous odor. It is comprised of 30% solids in a butanol-ethanol solvent. It is also soluble in polar solvents such as: alcohols (isopropanol, N-propanol, butanol and diacetone alcohol), ketones and the glycol ethers and their acetates. It is suitable for use as an optically clear, abrasion resistant coatings for lenses and applications requiring good chemical resistance, weatherability and enhanced light transmission. voir moins
GR-653LPP is a clear liquid with slight color and a vinous odor. It is comprised of 30% solids in a butanol-ethanol solvent. It is also soluble in polar solvents such as: alcohols (isopropanol, N-propanol, butanol and diacetone alcohol), ketones and the ...voir plus
GR-653LPP is a clear liquid with slight color and a vinous odor. It is comprised of 30% solids in a butanol-ethanol solvent. It is also soluble in polar solvents such as: alcohols (isopropanol, N-propanol, butanol and diacetone alcohol), ketones and the glycol ethers and their acetates. It is suitable for use as an optically clear, abrasion resistant coatings for lenses and applications requiring good chemical resistance, weatherability and enhanced light transmission. voir moins
GR-654L is a clear liquid with slight color and a vinous odor. It is comprised of 40% solids in a butanol-ethanol solvent. It is also soluble in polar solvents such as: alcohols (isopropanol, N-propanol, butanol and diacetone alcohol), ketones and the gl...voir plus
GR-654L is a clear liquid with slight color and a vinous odor. It is comprised of 40% solids in a butanol-ethanol solvent. It is also soluble in polar solvents such as: alcohols (isopropanol, N-propanol, butanol and diacetone alcohol), ketones and the glycol ethers and their acetates. It is suitable for use as an optically clear, abrasion resistant coatings for lenses and applications requiring good chemical resistance, weatherability and enhanced light transmission. voir moins
Min-U-Gel® attapulgite thixotropic thickener is highly suited for low-shear rheology control (flow & leveling, sag control, spatter resistance and more) in a wide range of liquid systems. It is a reliable stabilizer that is derived from unique colloidal l...voir plus
Min-U-Gel® attapulgite thixotropic thickener is highly suited for low-shear rheology control (flow & leveling, sag control, spatter resistance and more) in a wide range of liquid systems. It is a reliable stabilizer that is derived from unique colloidal lathe-shaped particles forming a very stable lattice structure that keeps liquids and particles more evenly dispersed and suspended. The uniformity it creates generates unique multi-functional performance benefits well beyond rheological properties, such as syneresis control, suspension, improved tint strength and hiding, reduced pigment flooding and in-can stability. voir moins
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
Désolé mais l'industrie que vous avez sélectionnée n'est pas disponible actuellement dans votre langue. Vous pouvez choisir une des langues ci-dessous pour sélectionner l'industrie ou sinon fermer cette fenêtre.
