| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...voir plus ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. voir moins | Request Sample |
| BECKOPOX™ EM 2120w/45WA | Allnex | BECKOPOX® EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX® EM 2120W/45WA is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorros...voir plus BECKOPOX® EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX® EM 2120W/45WA is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorrosive properties, especially on smooth steel. voir moins | Request Sample |
| BECKOPOX™ EM 460/60IBX | Allnex | Beckopox® EM 460/60IBX is an excellent adhesion to steel and nonferrous metals, high corrosions protection, best recoatability. It is used preferably in combination with polyvinyl butyral (PVB) for the production of wash primers and finish coatings. | Request Sample |
| BECKOPOX™ EP 116 | Allnex | Beckopox® EP 116 is a non-crystallizing liquid resin for coatings with high chemical-resistance, adhesives, trowelling, casting and laminating compounds. | Request Sample |
| BECKOPOX™ EP 117 | Allnex | Beckopox® EP 117 is a non-crystallizing, reactive diluted liquid resin for chemical-resistant coatings, concrete injections, adhesives, trowelling casting and laminating compounds. | Request Sample |
| BECKOPOX™ EP 128 | Allnex | Beckopox® EP 128 is a solvent-free liquid epoxy resin. It is used in: the construction field for chemical and abrasion resistant flooring compounds, for sealing and repairing stone and concrete structures, anticorrosion/solvent-free coating systems, for c...voir plus Beckopox® EP 128 is a solvent-free liquid epoxy resin. It is used in: the construction field for chemical and abrasion resistant flooring compounds, for sealing and repairing stone and concrete structures, anticorrosion/solvent-free coating systems, for cold and heat-curing trowelling and adhesive systems, in the electrical industry for castings, impregnations and composites, and for tool- and mould constructions, patterns, models and fixtures. voir moins | Request Sample |
| BECKOPOX™ EP 140 | Allnex | Beckopox® EP 140 is a liquid resin with high chemical resistance for coatings, adhesives, trowelling, casting and laminating compounds. | Request Sample |
| BECKOPOX™ EP 140/80SNB | Allnex | Beckopox® EP 140/80SNB is a liquid A-type resin diluted with organic solvent. Depending on the type of hardener it can be used for room temperature or heat curing applications. This form of delivery is especially designed for high solids formulations of a...voir plus Beckopox® EP 140/80SNB is a liquid A-type resin diluted with organic solvent. Depending on the type of hardener it can be used for room temperature or heat curing applications. This form of delivery is especially designed for high solids formulations of anticorrosion coatings and coatings with excellent chemical resistance. voir moins | Request Sample |
| BECKOPOX™ EP 147w | Allnex | BECKOPOX™ EP 147w is a non-crystallizing Bisphenol A/F liquid epoxy resin containing cross-linkable emulsifiers. It is used in primers/coatings on mineral and metallic substrates, and adhesives and water-washable jointing-compounds for tiles. | Request Sample |
| BECKOPOX™ EP 2340w/56WA | Allnex | BECKOPOX® EP 2340W/56WA is serving for trial purposes only. Deviations which might occur during transfer into manufacturing in a commercial scale are possible and do not constitute any material defect. | Request Sample |
| BECKOPOX™ EP 2350w/60WA | Allnex | Beckopox® EP 2350W/60WA is a solid epoxy resin dispersion in water with improved chemical resistance. | Request Sample |
| BECKOPOX™ EP 2384w/57WA | Allnex | BECKOPOX™ EP 2384w/57WA is a type 1 solid epoxy resin as aqueous dispersion. It results in rapid drying coating systems for mineral and metal substrates. | Request Sample |
| BECKOPOX™ EP 2392w/70MP | Allnex | Beckopox® EP 2392w/70MP is a flexibilized, water-emulsifiable, solid epoxy resin that is diluted in methoxypropanol. This solution can be easily emulsified with water in a high-speed mixer to achieve a stable dispersion. This product is used to formulate ...voir plus Beckopox® EP 2392w/70MP is a flexibilized, water-emulsifiable, solid epoxy resin that is diluted in methoxypropanol. This solution can be easily emulsified with water in a high-speed mixer to achieve a stable dispersion. This product is used to formulate anticorrosive primers, singular topcoats, due to its water-free form of delivery this product is very well suited for processing of water-sensitive pigments like zinc dust, such zinc-rich primers exhibit outstanding anti-corrosive properties. voir moins | Request Sample |
| BECKOPOX™ EP 301/75X | Allnex | Beckopox® EP 301/75X is a Type 1 resin for solventborne coatings, anticorrosion primers, additional binder for stoving paints, e.g. based on saturated polyesters or acrylates. | Request Sample |
| BECKOPOX™ EP 384w/53WAMP | Allnex | BECKOPOX™ EP 384w/53WAMP is a solid resin -Type 1- dispersion, in combination with water emulsifiable liquid resins for fast drying coatings, preferably for mineral substrates. | Request Sample |
| BECKOPOX™ EP 385w/56WA | Allnex | Beckopox® EP 385W/56WA is a solid epoxy resin; flexibilized; dispersion in water. Formulations have good adhesion to various plastics such as PC, PA, PUR and UP-laminates. | Request Sample |
| BECKOPOX™ EP 386w/52WA | Allnex | Beckopox® EP 386W/52WA is an internally plasticized solid resin-Type 1-dispersion with improved shear stability, e.g. for water reducible fast drying anticorrosion primers and coatings for plastics. | Request Sample |
| BECKOPOX™ EP 387w/52WA | Allnex | BECKOPOX™ EP 387w/52WA is a flexible solid epoxy resin. It is suited for corrosion protection primers with very good adhesion to most metallic substrates. It is also suitable for use in single coat and decorative systems for metallic substrates. For optim...voir plus BECKOPOX™ EP 387w/52WA is a flexible solid epoxy resin. It is suited for corrosion protection primers with very good adhesion to most metallic substrates. It is also suitable for use in single coat and decorative systems for metallic substrates. For optimium corrosion protection it is recommended using 75 % of the stoichiometric curing agent quantity. voir moins | Request Sample |
| BECKOPOX™ VEM 2448/50EEP | Allnex | Beckopox® VEM 2448/50EEP is a modified, carboxylated epoxy resin, self cross-linking. It's a sole binder for white and clear interior and exterior can-coating systems, stamping enamels, capsule lacquers, foil lacquers and coil-coating primers with outstan...voir plus Beckopox® VEM 2448/50EEP is a modified, carboxylated epoxy resin, self cross-linking. It's a sole binder for white and clear interior and exterior can-coating systems, stamping enamels, capsule lacquers, foil lacquers and coil-coating primers with outstanding resistances. voir moins | Request Sample |
| BECKOPOX™ VEP 2381w/55WA | Allnex | Beckopox® VEP 2381W/55WA is a 1001 type epoxy dispersion for water based topcoats, primers, and DTM coatings. | Request Sample |
| BECKOPOX™ VEP 2382w/55WA | Allnex | BECKOPOX® VEP 2382W/55WA is solid epoxy resin dispersion in water. When cured with suitable curing agents such as Beckopox EH 623w or EH 659w fast drying coating systems for mineral or metallic substrates can be formulated. | Request Sample |
| Bisphenol A Epoxy Diacrylate SM6104 | Jiangsu Sanmu Group Corporation | SM6104 is a standard bisphenol A epoxy diacrylate. It provides low viscosity and light color, and offers high gloss, hardness and excellent chemical resistance. This product is widely used in UV coatings, inks and adhesives, and more. | |
| CN104A75 | Sartomer Americas | CN104A75 is a difunctional bisphenol A-based epoxy acrylate blended with 25% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's bisphen...voir plus CN104A75 is a difunctional bisphenol A-based epoxy acrylate blended with 25% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's bisphenol A based epoxy acrylates. Suggested applications for this include adhesives, coatings, electronics and inks. voir moins | |
| CN104Z | Sartomer Americas | CN104Z is a difunctional epoxy acrylate. It provides a good balance of water properties and high reactivity. CN104Z offers the lowest color of Sartomer epoxy acrylates. It exhibits good chemical resistance. | |
| CN120Z | Sartomer Americas | CN120Z is a difunctional bisphenol A based epoxy acrylate. It provides a good balance of water properties and high reactivity. CN120Z offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, ana...voir plus CN120Z is a difunctional bisphenol A based epoxy acrylate. It provides a good balance of water properties and high reactivity. CN120Z offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, anaerobic, binder, pressure sensitive and structural adhesives. It is also recommended for floor, metal, paper and plastic coatings, electronics, inks, flexo, gravure and offset inks. voir moins | |
| DUROXYN® EF 2107W/43WA | Allnex | DUROXYN® EF 2107W/43WA is an aqueous, cationic epoxy-resin ester developed for the production of 1-component primers, with fast dry, high film hardness, and excellent stain blocking properties. | Request Sample |
| DUROXYN® EF 2107w/45WA | Allnex | DUROXYN® EF 2107W/45WA is an aqueous, cationic epoxy-resin ester developed for the production of 1-comp.-primers, with quick drying and high film hardness. | Request Sample |
| DUROXYN® EF 900/60X | Allnex | Duroxyn® EF 900/60X is an air-drying and stoving epoxy resin ester that is used in anticorrosive paint systems and primers, and zinc dust paints. | Request Sample |
| DUROXYN® EF 935/60X | Allnex | Duroxyn® EF 935/60X is an air-drying and stoving epoxy resin ester. It has very rapid air-drying, excellent hardness flexibility and adhesion, and excellent resistance to alkali and colour retention. It's used in industrial stoving enamels and air-drying ...voir plus Duroxyn® EF 935/60X is an air-drying and stoving epoxy resin ester. It has very rapid air-drying, excellent hardness flexibility and adhesion, and excellent resistance to alkali and colour retention. It's used in industrial stoving enamels and air-drying and stoving anticorrosive primers. voir moins | Request Sample |
| DUROXYN® SEF 968w | Allnex | Duroxyn® SEF 968w is a non-drying epoxy-resin-ester. It is used as binder for glass fibre sizing. It is processed as approx. 33 % emulsion in water. For production of the emulsion Duroxyn SEF 968w is heated up at a temperature of approx. 50 °C. | Request Sample |
| DUROXYN® SEF 968w/25WA | Allnex | DUROXYN® SEF 968w/25WA is a non-drying epoxy resin ester. It is used as binder for fiber sizing. It can be easily formulated and reduced with water to the required solids content. It can be used as the sole sizing material or formulated with other waterbo...voir plus DUROXYN® SEF 968w/25WA is a non-drying epoxy resin ester. It is used as binder for fiber sizing. It can be easily formulated and reduced with water to the required solids content. It can be used as the sole sizing material or formulated with other waterborne sizing components. Final compatibility and sizing bath stability needs to be evaluated. voir moins | Request Sample |
| DUROXYN® SEF 968w/50WA | Allnex | DUROXYN® SEF 968w/50WA is a non-drying epoxy resin ester. It is used as binder for fiber sizing. It can be easily formulated and reduced with water to the required solids content. It can be used as the sole sizing material or formulated with other waterbo...voir plus DUROXYN® SEF 968w/50WA is a non-drying epoxy resin ester. It is used as binder for fiber sizing. It can be easily formulated and reduced with water to the required solids content. It can be used as the sole sizing material or formulated with other waterborne sizing components. Final compatibility and sizing bath stability needs to be evaluated. voir moins | Request Sample |
| DUROXYN® VAX 6127w/42WA | Allnex | Duroxyn® VAX 6127W/42WA is an oxidatively drying epoxy resin ester in aqueous emulsion form. It has excellent corrosion resistance, high water stability, and good recoat-ability. It's a sole binder for air and forced drying anticorrosive primers and indus...voir plus Duroxyn® VAX 6127W/42WA is an oxidatively drying epoxy resin ester in aqueous emulsion form. It has excellent corrosion resistance, high water stability, and good recoat-ability. It's a sole binder for air and forced drying anticorrosive primers and industrial coatings. voir moins | Request Sample |
| DUROXYN® VEF 2406w/45WA | Allnex | Duroxyn® VEF 2406W/45WA is an aqueous, cationic epoxy-resin-ester developed for the production of 1-comp. -primers, with quick drying and high film hardness. | Request Sample |
| DUROXYN® VEF 4380w/35WA | Allnex | Duroxyn® VEF 4380W/35WA is an oxidatively drying epoxy resin ester in aqueous emulsion form. It's a sole binder for air and forced drying anticorrosive primers and industrial coatings. | Request Sample |
| EBECRYL® 3418 | Allnex | EBECRYL® 3418 is a modified epoxy diacrylate that exhibits excellent reactivity and low viscosity. Films of EBECRYL® 3418 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high flexibility, gloss, toughness, adhesion and superior chemical ...voir plus EBECRYL® 3418 is a modified epoxy diacrylate that exhibits excellent reactivity and low viscosity. Films of EBECRYL® 3418 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high flexibility, gloss, toughness, adhesion and superior chemical and scratch resistance. voir moins | Request Sample |
| EBECRYL® 4266 | Allnex | EBECRYL® 4266 is a modified aromatic epoxy acrylate without reactive diluent that is used in the formulation of UV/EB energy curable coatings. Coatings based on this product are characterized by their good sandability and high abrasion resistance. UV/EB c...voir plus EBECRYL® 4266 is a modified aromatic epoxy acrylate without reactive diluent that is used in the formulation of UV/EB energy curable coatings. Coatings based on this product are characterized by their good sandability and high abrasion resistance. UV/EB cured polymers of EBECRYL® 4266 exhibit a balance of hardness and flexibility. It is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet and film. voir moins | Request Sample |
| Epoxy Acrylate SE 147 | Soltech Ltd | Epoxy Acrylate SE 147 is an difunctional epoxy acrylate oligomer with 20% HDDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as ...voir plus Epoxy Acrylate SE 147 is an difunctional epoxy acrylate oligomer with 20% HDDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 147 is 80% polymer solid by weight with a viscosity of 6,500-10,500 at 25℃. voir moins | |
| Epoxy Acrylate SE 1605 | Soltech Ltd | Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is c...voir plus Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is commonly used in applications such as metal substrate inks, metal substrate coatings, and 2 component curing systems, Epoxy Acrylate SE 1605 is 100% polymer solid by weight with a viscosity of 800-1,200 at 60℃. voir moins | |
| EPOXY METHACRYLATE 97-053 | Rahn USA Corp. | EPOXY METHACRYLATE 97-053 is a Bisphenol A epoxy dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. The product properties can be described as follows: low shrinkage, high stress resistance and high e-modulus, high abrasion ...voir plus EPOXY METHACRYLATE 97-053 is a Bisphenol A epoxy dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. The product properties can be described as follows: low shrinkage, high stress resistance and high e-modulus, high abrasion resistance, high hardness and scratch resistance, good adhesion and monomer-free. It improves resistance to solvents and chemicals. EPOXY METHACRYLATE 97-053 is designed for dental composites, UV adhesives and UV curtain systems. voir moins | Request Sample |
| Epoxy Resin SM828 | Jiangsu Sanmu Group Corporation | SM828 is an undiluted, clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. It is a widely-used, general purpose liquid epoxy resin. This product is recognized as the standard from which many variations have been developed. It is rec...voir plus SM828 is an undiluted, clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. It is a widely-used, general purpose liquid epoxy resin. This product is recognized as the standard from which many variations have been developed. It is recommended for adhesives, marine and protective coatings, can and coil coatings, automotive coatings, and more. voir moins | |
| Functional O-Cresol Novalac Epoxy Resin | Suny Chem | Functional O-Cresol Novalac Epoxy Resin has low organic chlorine content and high heat resistance. The cured resin has good heat resistance and chemical stability. It can be used for heat resistance materials and molding materials such as plastic sealants...voir plus Functional O-Cresol Novalac Epoxy Resin has low organic chlorine content and high heat resistance. The cured resin has good heat resistance and chemical stability. It can be used for heat resistance materials and molding materials such as plastic sealants, electric packing sealants, PCB lamination wood, and solder mask inks. The high softening point resin is suitable for solder masking inks, especially green oil. voir moins | |
| GENOMER* 2235 | Rahn USA Corp. | GENOMER* 2235 is a low viscosity, aliphatic epoxy diacrylate resin for radically curable inks, coatings and adhesives. It can be used in the following applications: overprint varnishes, wood coatings, flexo inks, gravure inks and ink jet inks. The product...voir plus GENOMER* 2235 is a low viscosity, aliphatic epoxy diacrylate resin for radically curable inks, coatings and adhesives. It can be used in the following applications: overprint varnishes, wood coatings, flexo inks, gravure inks and ink jet inks. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. voir moins | Request Sample |
| GENOMER* 2252 | Rahn USA Corp. | GENOMER* 2252 is a Bisphenol A epoxy diacrylate. It is a resin for radically curable inks, coatings and adhesives. It can be used in the following applications: lithographic inks and varnishes; screen inks and varnishes; flexo inks and varnishes; letterpr...voir plus GENOMER* 2252 is a Bisphenol A epoxy diacrylate. It is a resin for radically curable inks, coatings and adhesives. It can be used in the following applications: lithographic inks and varnishes; screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings and adhesives. The product is used in combination with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. voir moins | Request Sample |
| GENOMER* 2252/GP25 | Rahn USA Corp. | GENOMER* 2252/GP25 is a Bisphenol A epoxy diacrylate in 25% GPTA. It is a resin for radically curable inks, coatings and adhesives. | Request Sample |
| GENOMER* 2252/TM20 | Rahn USA Corp. | GENOMER* 2252/TM20 is a Bisphenol A epoxy diacrylate in 20% TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...voir plus GENOMER* 2252/TM20 is a Bisphenol A epoxy diacrylate in 20% TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. voir moins | Request Sample |
| GENOMER* 2252/TP20 | Rahn USA Corp. | GENOMER* 2252/TP20 is a Bisphenol A epoxy diacrylate in 20% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...voir plus GENOMER* 2252/TP20 is a Bisphenol A epoxy diacrylate in 20% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. voir moins | Request Sample |
| GENOMER* 2252/TP30 | Rahn USA Corp. | GENOMER* 2252/TP30 is a Bisphenol A epoxy diacrylate in 30% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...voir plus GENOMER* 2252/TP30 is a Bisphenol A epoxy diacrylate in 30% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. voir moins | Request Sample |
| GENOMER* 2252/TP40 | Rahn USA Corp. | GENOMER* 2252/TP40 is a Bisphenol A epoxy diacrylate in 40% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...voir plus GENOMER* 2252/TP40 is a Bisphenol A epoxy diacrylate in 40% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. voir moins | Request Sample |
| GENOMER* 2253 | Rahn USA Corp. | GENOMER* 2253 is a modified epoxy acrylate resin. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is used in the following applications: letterpress inks, flexo inks and varnishes, screen inks and varnishes, and v...voir plus GENOMER* 2253 is a modified epoxy acrylate resin. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is used in the following applications: letterpress inks, flexo inks and varnishes, screen inks and varnishes, and varnishes for paper, board and plastics. voir moins | Request Sample |
| GENOMER* 2259 | Rahn USA Corp. | GENOMER* 2259 is a modified epoxy acrylate resin. It is a resin for radically curable inks, coatings and adhesives. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is used in the...voir plus GENOMER* 2259 is a modified epoxy acrylate resin. It is a resin for radically curable inks, coatings and adhesives. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is used in the following applications: offset inks and varnishes; letterpress inks; screen inks and varnishes; coatings for paper, board and plastics; and wood coatings. voir moins | Request Sample |
| GENOMER* 2263 | Rahn USA Corp. | GENOMER* 2263 is a vinylester resin. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high stress at break and high e-modulus. GENOMER* 2263 is typically applied in offset inks and varnishes, letterpress inks, scr...voir plus GENOMER* 2263 is a vinylester resin. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high stress at break and high e-modulus. GENOMER* 2263 is typically applied in offset inks and varnishes, letterpress inks, screen inks and varnishes, and wood plastic, and paper coatings. voir moins | Request Sample |
| GENOMER* 2280 | Rahn USA Corp. | GENOMER* 2280 is a modified bisphenol A epoxy diacrylate resin for radically curable inks, coatings and adhesives. This product is used in the following applications: coatings for paper, wood and plastics and metal decorative inks and coatings. Compared t...voir plus GENOMER* 2280 is a modified bisphenol A epoxy diacrylate resin for radically curable inks, coatings and adhesives. This product is used in the following applications: coatings for paper, wood and plastics and metal decorative inks and coatings. Compared to standard bisphenol A epoxy acrylates, GENOMER* 2280 offers greater flexibility and toughness while maintaining fast cure response, high resistance properties and high hardness. voir moins | Request Sample |
| R-1008-0 | NuSil Silicone Technology 1 | R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating mus...voir plus R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). voir moins | |
| RESYDROL® AX 237w/70BG | Allnex | Resydrol® AX 237W/70BG is a water-dilutable oxidative drying epoxy resin ester. It's a sole binder for air-drying corrosion protection coatings. | Request Sample |
| RESYDROL® AX 246w/70BG | Allnex | Resydrol® AX 246W/70BG is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade...voir plus Resydrol® AX 246W/70BG is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade waterborne single-coat finishes for industrial applications. voir moins | Request Sample |
| RESYDROL® AX 247w/70BGMP | Allnex | Resydrol® AX 247W/70BGMP is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-gra...voir plus Resydrol® AX 247W/70BGMP is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade waterborne single-coat finishes for industrial applications. voir moins | Request Sample |
| RESYDROL® AX 250w/75EP | Allnex | Resydrol® AX 250W/75EP is a water dilutable, fatty acid modified epoxy resin ester. It has excellent pigment wetting, high corrosion protection, and very good reactivity with melamine resins. | Request Sample |
| RESYDROL® AX 906w/35WA | Allnex | Resydrol® AX 906W/35WA is a water-thinnable, epoxy resin-modified, oil-free, alkyd resin with outstanding anti-corrosive properties, excellent pigment wetting, high reactivity and very good storage stability. It has to be used for paints in which a co-sol...voir plus Resydrol® AX 906W/35WA is a water-thinnable, epoxy resin-modified, oil-free, alkyd resin with outstanding anti-corrosive properties, excellent pigment wetting, high reactivity and very good storage stability. It has to be used for paints in which a co-solvent content of about 5 % must not be exceeded. voir moins | Request Sample |
| SETAL® 18-1123 | Allnex | SETAL® 18-1123 is an oil modified epoxy ester resin recommended for general use in quality enamels, primers and shopcoats. | Request Sample |
| SETAL® 28-4001 | Allnex | SETAL® 28-4001 is an economical high solids oil modified epoxy ester intended for air dry or baking applications. SETAL® 28-4001 is especially suited for uses requiring a hard and flexible finish with excellent adhesion and good alkali and abrasion resist...voir plus SETAL® 28-4001 is an economical high solids oil modified epoxy ester intended for air dry or baking applications. SETAL® 28-4001 is especially suited for uses requiring a hard and flexible finish with excellent adhesion and good alkali and abrasion resistance. voir moins | Request Sample |
| SILIKOPON® EC | Evonik Operations GmbH, BL Coating Additives | SILIKOPON® EC is a clear to hazy liquid, silicone epoxy resin that is dilutable by esters, ketones and glycol ethers. It is heat stable, has excellent adhesion, as well as corrosion, chemical, and solvent resistance. This product is used in high-temperatu...voir plus SILIKOPON® EC is a clear to hazy liquid, silicone epoxy resin that is dilutable by esters, ketones and glycol ethers. It is heat stable, has excellent adhesion, as well as corrosion, chemical, and solvent resistance. This product is used in high-temperature, anti-corrosion coatings for mufflers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. It is used in muffler coatings particularly for motor bikes. voir moins | Request Sample |
| SILIKOPON® ED | Evonik Operations GmbH, BL Coating Additives | SILIKOPON® ED is a silicone epoxy resin with good chemical resistance and excellent corrosion resistance. It is suitable for ultra high solids coatings. Applications include industrial and anti-corrosion coatings, offshore/marine areas, structural steel,...voir plus SILIKOPON® ED is a silicone epoxy resin with good chemical resistance and excellent corrosion resistance. It is suitable for ultra high solids coatings. Applications include industrial and anti-corrosion coatings, offshore/marine areas, structural steel, rail car and tank construction, concrete walls and floors, and commercial transport coatings. voir moins | Request Sample |
| SILIKOPON® EF | Evonik Operations GmbH, BL Coating Additives | SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pi...voir plus SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pipe lining, and commercial transport coatings. Some special features of SILIKOPON® EF includes extraordinary gloss retention and weather resistance, an anti-graffiti effect, excellent corrosion resistance, and is suitable for ultra high solids coatings. voir moins | Request Sample |
| Uvi-Cure S105E | Lambson Group Ltd. | UviCure S105E is a high purity, low viscosity difunctional cycloaliphatic epoxide resin which gives clear, hard, glossy coatings when polymerised with onium salt photoinitiators. | |
| Uvi-Cure S110-LV | Lambson Group Ltd. | Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains l...voir plus Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains low viscosity enabling a greater scope for meeting end-use processing needs. When this pale yellow to colourless transparent liquid is combined with photoinitiators it produces a clear, hard, glossy coatings. voir moins | |
| Uvi-Cure S128 | Lambson Group Ltd. | UviCure S128 is an adipate based difunctional cycloaliphatic epoxide resin which can be used alone or as an additive in UviCure S105 based formulations to increase the flexibility of a cured coating when polymerised with onium salt photoinitiators. | |
| UviCure S105 | Lambson Group Ltd. | UviCure S105 is a low viscosity difunctional cycloaliphatic epoxide resin which gives clear, hard, glossy coatings when polymerised with onium salt photoinitiators. |
