| AVANSE™ MV-100 | Univar Solutions | AVANSE™ MV-100 is an ambient temperature self-crosslinking acrylic emulsion which can be formulated into corrosion-resistant primers, highly durable topcoats, and high gloss, direct-to-metal (DTM) finish coats. Applications include both factory and field ...voir plus AVANSE™ MV-100 is an ambient temperature self-crosslinking acrylic emulsion which can be formulated into corrosion-resistant primers, highly durable topcoats, and high gloss, direct-to-metal (DTM) finish coats. Applications include both factory and field applied finishes for metal, concrete and masonry substrates. It has the ability to be formulated into high performance coating at or below 100 g/L of volatile organic content (VOC). voir moins | Request Sample |
| AVANSE™ ST-410 | Univar Solutions | AVANSE™ ST-410 is a 100% acrylic water borne emulsion, formulated to meet the toughest VOC standards and still outperform traditional solvent and water borne semitransparent stain technologies. It is easy to apply and doesn't require coalescent or heavy m...voir plus AVANSE™ ST-410 is a 100% acrylic water borne emulsion, formulated to meet the toughest VOC standards and still outperform traditional solvent and water borne semitransparent stain technologies. It is easy to apply and doesn't require coalescent or heavy metal driers to enhance the long lasting appearance of new or weathered wood. It's morphology and unique particle stabilization maximize the flow and lapping characteristics during application while building early resistance properties upon drying. voir moins | Request Sample |
| EMULSION E-2353 | Univar Solutions | EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory-applied, waterborne, interior and exterior wood coatings. Its self-crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and top...voir plus EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory-applied, waterborne, interior and exterior wood coatings. Its self-crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and topcoats. It can be blended with a softer polymer, such as RHOPLEX™ AC-261, to improve on flexibility and toughness. It can also be reacted with melamine formaldehyde resins, the combination of which offers an extremely durable finish, ideally suited for long-term warranty applications. voir moins | Request Sample |
| MAINCOTE™ 4950 | Univar Solutions | MAINCOTE™ 4950 is an aqueous acrylic polymer capable of being formulated to a less or equal to 50 g/L volatile organic content (VOC) coating for light to medium duty maintenance and industrial applications. It offers excellent exterior durability, corrosi...voir plus MAINCOTE™ 4950 is an aqueous acrylic polymer capable of being formulated to a less or equal to 50 g/L volatile organic content (VOC) coating for light to medium duty maintenance and industrial applications. It offers excellent exterior durability, corrosion resistance, and ease of formulation with excellent paint stability. It also offers good architectural gloss and trim paint properties. voir moins | Request Sample |
| MAINCOTE™ AE-58 | Univar Solutions | MAINCOTE™ AE-58 is an acrylic emulsion which reacts with epoxies offering coatings with paint characteristics such as low VOC, low toxicity, and low odor and the performance profile of conventional solvent-borne 2-pack epoxy finishes. It is designed for g...voir plus MAINCOTE™ AE-58 is an acrylic emulsion which reacts with epoxies offering coatings with paint characteristics such as low VOC, low toxicity, and low odor and the performance profile of conventional solvent-borne 2-pack epoxy finishes. It is designed for general-purpose acrylic/epoxy paints which can be used on a variety of substrates such as exterior and interior metal and concrete. Property benefits include a long pot-life, low-temperature property response, and improved durability. voir moins | Request Sample |
| MAINCOTE™ HG-54D | Univar Solutions | MAINCOTE™ HG-54D is an acrylic resin setting a performance standard for waterborne maintenance coatings, which can be formulated into corrosion resistant primers along with full gloss, durable topcoats for commercial, institutional, and industrial mainten...voir plus MAINCOTE™ HG-54D is an acrylic resin setting a performance standard for waterborne maintenance coatings, which can be formulated into corrosion resistant primers along with full gloss, durable topcoats for commercial, institutional, and industrial maintenance markets. voir moins | Request Sample |
| MAINCOTE™ HG-56 | Univar Solutions | MAINCOTE™ HG-56 is an acrylic emulsion designed as a binder for maintenance coatings. While it is compositionally similar to MAINCOTE™ HG-54D, it offers improved reactive-pigment stability which achieve higher solids levels (50% vs. 41.5%), along with imp...voir plus MAINCOTE™ HG-56 is an acrylic emulsion designed as a binder for maintenance coatings. While it is compositionally similar to MAINCOTE™ HG-54D, it offers improved reactive-pigment stability which achieve higher solids levels (50% vs. 41.5%), along with improved stability. voir moins | Request Sample |
| MAINCOTE™ PR-15 | Univar Solutions | MAINCOTE™ PR-15 is a waterborne acrylic resin designed to have a high degree of short-term block resistance and metal protection properties required of shop primers. It functions best where a finisher has some control of drying conditions. It can also be ...voir plus MAINCOTE™ PR-15 is a waterborne acrylic resin designed to have a high degree of short-term block resistance and metal protection properties required of shop primers. It functions best where a finisher has some control of drying conditions. It can also be formulated into high-quality OEM and general industrial topcoat finishes for steel substrates treated with zinc or iron phosphate. voir moins | Request Sample |
| MAINCOTE™ PR-71 | Univar Solutions | MAINCOTE™ PR-71 is an acrylic waterborne emulsion which allows the coating manufacturer to supply primers that not only adhere to difficult metallic substrates, but also give good corrosion resistance over carbon steel in a wide application environment. T...voir plus MAINCOTE™ PR-71 is an acrylic waterborne emulsion which allows the coating manufacturer to supply primers that not only adhere to difficult metallic substrates, but also give good corrosion resistance over carbon steel in a wide application environment. This resin's ability to be topcoated by most solvent-based coating systems makes it a very versatile water-based primer. voir moins | Request Sample |
| RHOPLEX™ 52 | Univar Solutions | RHOPLEX™ 52 is a styrene-acrylic emulsion designed to be employed in stain blocking interior and exterior primers. It provides excellent tannin and marker stain blocking in zinc oxide free and zinc oxide containing formulations. It has excellent sandabili...voir plus RHOPLEX™ 52 is a styrene-acrylic emulsion designed to be employed in stain blocking interior and exterior primers. It provides excellent tannin and marker stain blocking in zinc oxide free and zinc oxide containing formulations. It has excellent sandability allowing formulated primers to be quickly topcoated. It has excellent alkaki resistance minimizing efflorescence and good adhesion to a variety of substrates including alkyds, wood, masonry, aluminum and steel. It also has very good enamel holdout properties.RHOPLEX™ 52 can be coalesced with non-volatile plasticisers to formulate primers with <5g/l VOC and is made APEO-free(1). voir moins | Request Sample |
| RHOPLEX™ 585 | Univar Solutions | RHOPLEX™ 585 is a 100% acrylic binder designed for premium exterior performance in flat and satin Architectural Coatings. It is supplied at high solids for formulation flexibility and does not contain any APEO (alkyl phenol ethoxylate) surfactants. The lo...voir plus RHOPLEX™ 585 is a 100% acrylic binder designed for premium exterior performance in flat and satin Architectural Coatings. It is supplied at high solids for formulation flexibility and does not contain any APEO (alkyl phenol ethoxylate) surfactants. The low coalescent demand of RHOPLEX™TM 585 allows the formulator to meet the 50g/VOC regulations while still maintaining some freeze thaw stability. Due to its 100% acrylic composition, RHOPLEX™TM 585 offers good exterior durability. voir moins | Request Sample |
| RHOPLEX™ AC-1034 | Univar Solutions | RHOPLEX™ AC-1034 is a styrenated acrylic copolymer with a distinct composition that imparts excellent water resistance as well as a good degree of flexibility. It is designed for use in edgesealer products and offers very good compatibility with high leve...voir plus RHOPLEX™ AC-1034 is a styrenated acrylic copolymer with a distinct composition that imparts excellent water resistance as well as a good degree of flexibility. It is designed for use in edgesealer products and offers very good compatibility with high levels of waxes and fillers, which are often used in such products. RHOPLEX™ AC-1034 can also be used as a clear primer or sealer coat to provide water resistance. voir moins | Request Sample |
| RHOPLEX™ AC-2235M | Univar Solutions | RHOPLEX™ AC-2235M is a 100% acrylic binder provides a high degree of adhesion, durability, film build, flow and leveling. It is designed for use in exterior flat and sheen latex housepaints. | Request Sample |
| RHOPLEX™ AC-2508 | Univar Solutions | RHOPLEX™ AC-2508 is a 100% acrylic binder designed for exterior semigloss house and trim paints. | Request Sample |
| RHOPLEX™ AC-261 LF | Univar Solutions | RHOPLEX™ AC-261 LF is an all-acrylic emulsion polymer for latex floor paints. Its adhesion and abrasion resistance have been designed for this application. It is also suitable for quality exterior semi-gloss trim paints. | Request Sample |
| RHOPLEX™ AC-264 | Univar Solutions | RHOPLEX™ AC-264 is a unique high solids, 100%-acrylic emulsion vehicle for exterior latex paints which provides a high level of adhesion to chalky substrates. It provides the excellent general durability associated with all-acrylic binders designed for ex...voir plus RHOPLEX™ AC-264 is a unique high solids, 100%-acrylic emulsion vehicle for exterior latex paints which provides a high level of adhesion to chalky substrates. It provides the excellent general durability associated with all-acrylic binders designed for exterior paints. voir moins | Request Sample |
| RHOPLEX™ AC-337N | Univar Solutions | RHOPLEX™ AC-337N is 100% Acrylic Emulsion is designed for use in semi-transparent stains. This binder provides an extremely hydrophobic film, leading to excellent water resistance and reduced liquid water permeability. It reacts more efficiently with asso...voir plus RHOPLEX™ AC-337N is 100% Acrylic Emulsion is designed for use in semi-transparent stains. This binder provides an extremely hydrophobic film, leading to excellent water resistance and reduced liquid water permeability. It reacts more efficiently with associative thickeners, leading potentially to lower formulation cost. RHOPLEX™ AC-337N also shows improved color acceptance and alkyd compatibility. The 100% acrylic backbone ensures the high standard of tint retention, crack resistance, chalk resistance, and alkali resistance. The outstanding adhesion technology will ensure excellent adhesion to wood. The in-can clarity makes it possible to prepare transparent and semi-transparent stains with more attractive application properties than conventional alkyd emulsion or acrylic emulsion based stains. voir moins | Request Sample |
| RHOPLEX™ AC-347 | Univar Solutions | RHOPLEX™ AC-347 is a 100% acrylic vehicle developed for use in interior and exterior semigloss paints. It has excellent adhesion and abrasion resistance, along with very good flow and leveling, and gloss with both dry and slurry paints. | Request Sample |
| RHOPLEX™ AC-464 | Univar Solutions | RHOPLEX™ AC-464 is a high solids, emulsion vehicle for exterior latex paints which provides excellent adhesion to chalky substrates, excellent general exterior durability and can be compounded to meet low VOCs and multiple freeze-thaw requirements. | Request Sample |
| RHOPLEX™ B-60A | Univar Solutions | RHOPLEX™ B-60A is a non-reactive specialty binder. Excellent color stability. Recommended for applications where clarity and resistance to discoloration are desired. | Request Sample |
| RHOPLEX™ CL-105 | Univar Solutions | RHOPLEX™ CL-105 is an acrylic emulsion designed for use in factory-applied, waterborne, acrylic wood finishes requiring warmth, clarity, grain character, and sandability. Sealers based have excellent sanding characteristics without the addition of stearat...voir plus RHOPLEX™ CL-105 is an acrylic emulsion designed for use in factory-applied, waterborne, acrylic wood finishes requiring warmth, clarity, grain character, and sandability. Sealers based have excellent sanding characteristics without the addition of stearates or other sanding aids. Formulations are clear from the moment they are applied due to their excellent wet film clarity. These formulations also dry very rapidly. Clear lacquers formulations have very low VOC and HAPS content. voir moins | Request Sample |
| RHOPLEX™ CL-106 | Univar Solutions | RHOPLEX™ CL-106 is an acrylic emulsion has been designed for use in factory-applied clear topcoats for wood requiring the highest levels of appearance and surface hardness characteristics. Lacquers are translucent in the can and upon application turn clea...voir plus RHOPLEX™ CL-106 is an acrylic emulsion has been designed for use in factory-applied clear topcoats for wood requiring the highest levels of appearance and surface hardness characteristics. Lacquers are translucent in the can and upon application turn clear very rapidly while drying. voir moins | Request Sample |
| RHOPLEX™ CL-204 | Univar Solutions | RHOPLEX™ CL-204 is a acrylic emulsion designed for use in factory applied, clear topcoats over wood coatings which dry quickly and have early print and block resistance. It was also designed to minimize microfoam entrapment when coating conditions aren't ...voir plus RHOPLEX™ CL-204 is a acrylic emulsion designed for use in factory applied, clear topcoats over wood coatings which dry quickly and have early print and block resistance. It was also designed to minimize microfoam entrapment when coating conditions aren't ideal, which causes blemishes, haziness and clarity loss. voir moins | Request Sample |
| RHOPLEX™ EC-2848 | Univar Solutions | RHOPLEX™ EC-2848 is a 100% acrylic polymer emulsion for use in elastomeric wall coatings providing outstanding balance of elongation, tensile strength, and dirt pick-up resistance over a wide temperature range. The elongation and recovery properties of th...voir plus RHOPLEX™ EC-2848 is a 100% acrylic polymer emulsion for use in elastomeric wall coatings providing outstanding balance of elongation, tensile strength, and dirt pick-up resistance over a wide temperature range. The elongation and recovery properties of the polymer allow coatings to bridge dimensionally unstable cracks without rupturing. voir moins | Request Sample |
| RHOPLEX™ EP-6060 | Univar Solutions | RHOPLEX™ EP-6060 is an acrylic emulsion recommended for factory-applied interior wood coatings requiring early hardness, block resistance, and sandability. It can be used in clear formulations as a sealer and topcoat or in lightly pigmented (PVC 20%) coat...voir plus RHOPLEX™ EP-6060 is an acrylic emulsion recommended for factory-applied interior wood coatings requiring early hardness, block resistance, and sandability. It can be used in clear formulations as a sealer and topcoat or in lightly pigmented (PVC 20%) coatings. The wet and dry clarity of films are good, especially over light wood. voir moins | Request Sample |
| RHOPLEX™ HG-44P | Univar Solutions | RHOPLEX™ HG-44P is an acrylic co-polymer emulsion developed specifically as a paint vehicle for both interior and light duty exterior high gloss and semigloss enamels. This aqueous latex allows the formulator to make enamel-like paints with the outstandin...voir plus RHOPLEX™ HG-44P is an acrylic co-polymer emulsion developed specifically as a paint vehicle for both interior and light duty exterior high gloss and semigloss enamels. This aqueous latex allows the formulator to make enamel-like paints with the outstanding block resistance, stain removal, and washability needed for indoor use. It has good metal adhesion, resistance to household chemicals and can be formulated for light maintenance applications. voir moins | Request Sample |
| RHOPLEX™ HG-706 | Univar Solutions | RHOPLEX™ HG-706 is an all acrylic emulsion designed for interior and exterior VOC-compliant gloss and semigloss enamels, allowing formulators to produce high performance coatings at 50 g/l VOC. The combination of an all-acrylic backbone and ambient-cure c...voir plus RHOPLEX™ HG-706 is an all acrylic emulsion designed for interior and exterior VOC-compliant gloss and semigloss enamels, allowing formulators to produce high performance coatings at 50 g/l VOC. The combination of an all-acrylic backbone and ambient-cure crosslinking technology provides superior performance in formulations ranging from 50 to 150 g/l VOC. Enamels based on RHOPLEX™ HG-706 emulsion provide excellent adhesion, block, and stain removal. voir moins | Request Sample |
| RHOPLEX™ HG-95P | Univar Solutions | RHOPLEX™ HG-95P is a 100% acrylic emulsion with ambient crosslinking was developed specifically for low VOC aqueous gloss enamels with excellent hardness, block resistance, durability and resistance to many household chemicals. It is recommended for inter...voir plus RHOPLEX™ HG-95P is a 100% acrylic emulsion with ambient crosslinking was developed specifically for low VOC aqueous gloss enamels with excellent hardness, block resistance, durability and resistance to many household chemicals. It is recommended for interior/exterior applications in both high gloss and semigloss finishes. voir moins | Request Sample |
| RHOPLEX™ MULTILOBE 200 | Univar Solutions | RHOPLEX™ MULTILOBE 200 is an APEO (Alkyl Phenol Ethoxylate) surfactant free acrylic emulsion providing outstanding durability, tint retention, and dirt resistance for low VOC exterior flat and satin coatings. This unique technology enhances brush drag, du...voir plus RHOPLEX™ MULTILOBE 200 is an APEO (Alkyl Phenol Ethoxylate) surfactant free acrylic emulsion providing outstanding durability, tint retention, and dirt resistance for low VOC exterior flat and satin coatings. This unique technology enhances brush drag, durability, film build, chalk adhesion and minimized thickener, and surfactant levels in the paint formulation. It also saves on raw material costs with surfactant and defoamers for building tint and minimizing air entrapment. voir moins | Request Sample |
| RHOPLEX™ MULTILOBE 400 | Univar Solutions | RHOPLEX™ MULTILOBE 400 is an APEO (alkyl phenol ethoxylate) surfactant free binder for low-VOC exterior flat and satin paints, providing excellent durability, color retention, and dirt pick-up resistance. It enhances film-build performance and reduces thi...voir plus RHOPLEX™ MULTILOBE 400 is an APEO (alkyl phenol ethoxylate) surfactant free binder for low-VOC exterior flat and satin paints, providing excellent durability, color retention, and dirt pick-up resistance. It enhances film-build performance and reduces thickener demand. Also, polymer composition has been modified to a slightly lower Tg relative to MULTILOBE™ 200 in order to optimize the balance of properties with lower co-solvent levels. voir moins | Request Sample |
| RHOPLEX™ MV-23 LO | Univar Solutions | RHOPLEX™ MV-23 LO is an aqueous, all-acrylic binder designed for interior and exterior wood primers and stain-blocking sealers. It is a versatile vehicle that can be used in both the formulation of primers that upgrade difficult substrates into sound repa...voir plus RHOPLEX™ MV-23 LO is an aqueous, all-acrylic binder designed for interior and exterior wood primers and stain-blocking sealers. It is a versatile vehicle that can be used in both the formulation of primers that upgrade difficult substrates into sound repaint surfaces, and stainblocking sealers that minimize the "bleed through" of wood tannins and common household stains. voir moins | Request Sample |
| RHOPLEX™ P-376 50% | Univar Solutions | RHOPLEX™ P-376 50% is a styrene acrylic binder is a hydrophobic binder with excellent wet and dry pick resistance for offset printing. This latex is effective in promoting sheet gloss development, glueability properties for packaging, and ink/aqueous coat...voir plus RHOPLEX™ P-376 50% is a styrene acrylic binder is a hydrophobic binder with excellent wet and dry pick resistance for offset printing. This latex is effective in promoting sheet gloss development, glueability properties for packaging, and ink/aqueous coating holdout in offset printing. It has excellent compatibility with natural and synthetic co-binders and adhesion to paper and non-conventional substrates. voir moins | Request Sample |
| RHOPLEX™ PR-33 | Univar Solutions | RHOPLEX™ PR-33 is an aqueous, all-acrylic binder designed for exterior and interior primers and stain blocking sealers, which uses ambient crosslinking technology to offer improved performance versus conventional latex polymers. It achieves excellent film...voir plus RHOPLEX™ PR-33 is an aqueous, all-acrylic binder designed for exterior and interior primers and stain blocking sealers, which uses ambient crosslinking technology to offer improved performance versus conventional latex polymers. It achieves excellent film formation blocking stains from migrating through the dry paint film and yields stain blocking performance at high PVC. Enhanced adhesion and excellent durability are additional attributes of this technology. voir moins | Request Sample |
| RHOPLEX™ SG-10AF | Univar Solutions | RHOPLEX™ SG-10AF is a versatile 100% copolymer designed for high-quality interior/exterior semigloss paints which provides excellent early and ultimate block resistance, along with very good flow and leveling. This product establishes a new level of perfo...voir plus RHOPLEX™ SG-10AF is a versatile 100% copolymer designed for high-quality interior/exterior semigloss paints which provides excellent early and ultimate block resistance, along with very good flow and leveling. This product establishes a new level of performance for aqueous semigloss applications. voir moins | Request Sample |
| RHOPLEX™ SG-30 | Univar Solutions | RHOPLEX™ SG-30 is a 100% acrylic emulsion designed to meet 150 g/L VOC for semigloss interior and exterior architectural paints, while maintaining key properties of conventional higher VOC semigloss architectural paints. | Request Sample |
| RHOPLEX™ SS-4 | Univar Solutions | RHOPLEX™ SS-4 is a 100% acrylic with quick drying tendencies that will resist the rigorous environments encountered on many exterior sports surfaces. It Offers a balance of excellent cost and performance characteristics with excellent pigment and sand bin...voir plus RHOPLEX™ SS-4 is a 100% acrylic with quick drying tendencies that will resist the rigorous environments encountered on many exterior sports surfaces. It Offers a balance of excellent cost and performance characteristics with excellent pigment and sand binding capacity, superior resistance to wear and quick drying capabilities. voir moins | Request Sample |
| RHOPLEX™ TP-257 | Univar Solutions | RHOPLEX™ TP-257 is a high-solids binder for waterborne acrylic traffic paints, which offers a good cost/performance balance. Quick-drying striping paint resist the rigorous environment encountered on highways and related surfaces such as airfields and par...voir plus RHOPLEX™ TP-257 is a high-solids binder for waterborne acrylic traffic paints, which offers a good cost/performance balance. Quick-drying striping paint resist the rigorous environment encountered on highways and related surfaces such as airfields and parking lots. voir moins | Request Sample |
| RHOPLEX™ VSR-50 | Univar Solutions | RHOPLEX™ VSR-50 is a 100% acrylic binder designed for premium performance interior and exterior multi-substrate capable, flat to gloss architectural coatings, and is particularly useful in formulating paints at 50 g/l VOC with some freeze-thaw capability....voir plus RHOPLEX™ VSR-50 is a 100% acrylic binder designed for premium performance interior and exterior multi-substrate capable, flat to gloss architectural coatings, and is particularly useful in formulating paints at 50 g/l VOC with some freeze-thaw capability. It is easy to formulate, slurry compatible with excellent stain removal and alkali resistance, good interior and exterior durability. voir moins | Request Sample |
| RHOPLEX™ WL-100 | Univar Solutions | RHOPLEX™ WL-100 is an acrylic-styrene copolymer designed for high-gloss, high-DOI (Distinctness of Image) waterborne plastic coatings where an attractive appearance and excellent dry and wet adhesion are important considerations. The favorable colloidal s...voir plus RHOPLEX™ WL-100 is an acrylic-styrene copolymer designed for high-gloss, high-DOI (Distinctness of Image) waterborne plastic coatings where an attractive appearance and excellent dry and wet adhesion are important considerations. The favorable colloidal stability (robustness) accommodates a wide range of formulation types and process types capable of meeting many applications. It can achieve volume solids above conventional waterborne binders. voir moins | Request Sample |
| RHOPLEX™ WL-51 | Univar Solutions | RHOPLEX™ WL-51 is an acrylic resin ideal for high-performance waterborne finishes for coating plastic substrates which are used for business machines and office equipment which require ideal durability, appearance and application-use. Examples of plastic ...voir plus RHOPLEX™ WL-51 is an acrylic resin ideal for high-performance waterborne finishes for coating plastic substrates which are used for business machines and office equipment which require ideal durability, appearance and application-use. Examples of plastic substrates include acrylonitrile, butadiene, styrene, polycarbonate, polyphenylene oxide, polyvinyl chloride, acrylic, polystyrene, high-impact polystyrene, polypropylene, and pre-treated thermoplastic polyolefin. voir moins | Request Sample |
| RHOPLEX™ WL-81 | Univar Solutions | RHOPLEX™ WL-81 is a thermoplastic, waterborne, acrylic polymer is specifically designed for clear and pigmented ambient or forced-air-dry industrial lacquers. It is suitable for use on a variety of substrates and offering benefits currently provided by so...voir plus RHOPLEX™ WL-81 is a thermoplastic, waterborne, acrylic polymer is specifically designed for clear and pigmented ambient or forced-air-dry industrial lacquers. It is suitable for use on a variety of substrates and offering benefits currently provided by solventborne industrial lacquers, but without the flammability, odor, or other problems inherent with such systems. voir moins | Request Sample |
| RHOPLEX™ WL-91 | Univar Solutions | RHOPLEX™ WL-91 is a thermoplastic acrylic emulsion polymer can be formulated into both concrete and tile sealers. Formulations are comparable in performance, yet lower in cost, than aqueous acrylicurethane systems found in the marketplace today by avoidin...voir plus RHOPLEX™ WL-91 is a thermoplastic acrylic emulsion polymer can be formulated into both concrete and tile sealers. Formulations are comparable in performance, yet lower in cost, than aqueous acrylicurethane systems found in the marketplace today by avoiding surface preparation and raw materials associated with many solvent-borne systems. Furthermore, it exhibits superiority in chemical resistance, oil resistance, and film toughness. voir moins | Request Sample |
| RHOPLEX™ WL-96 | Univar Solutions | RHOPLEX™ WL-96 is a waterborne acrylic polymer used for low-VOC, brush-applied, interior clear wood finishes. It is well suited for finishing wood trim, doors, walls and floors. Formulation blends with polyurethane dispersions enhance hardness, stain and ...voir plus RHOPLEX™ WL-96 is a waterborne acrylic polymer used for low-VOC, brush-applied, interior clear wood finishes. It is well suited for finishing wood trim, doors, walls and floors. Formulation blends with polyurethane dispersions enhance hardness, stain and chemical resistance, and other performance characteristics. voir moins | Request Sample |
| RHOPLEX™ WP-1 | Univar Solutions | RHOPLEX™ WP-1 is a plasticizer. | Request Sample |
| Rovene® 6005 | Mallard Creek Polymers, Inc. | Rovene® 6005 is a very soft acrylic specifically designed for formulation of permanent label adhesives. It is specifically designed for formulation of pressure sensitive permanent label adhesives. | |
| Tykote® 6160 | Mallard Creek Polymers, Inc. | Tykote® 6160 is a flexible, film forming acrylic emulsion designed to provide a good balance of Cobb resistance, OGR, and MVTR properties from coatings made with it. Films and coatings made from Tykote® 6160 also have good flexibility. This product demons...voir plus Tykote® 6160 is a flexible, film forming acrylic emulsion designed to provide a good balance of Cobb resistance, OGR, and MVTR properties from coatings made with it. Films and coatings made from Tykote® 6160 also have good flexibility. This product demonstrates the ability to be applied via all typical methods used to apply barrier coatings, including rod, blade, and flexo or gravure presses. voir moins |
