| 1,6-Hexanediol | Perstorp | 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications. | |
| 4646-X-50 Epoxy Ester | Gabriel Performance Products | 4646-X-50 Epoxy Ester is a versatile epoxy ester resin which gives fast air drying enamels and primers excellent adhesion. 4646-X-50 can be cross linked with melamines for chemical and corrosion resistant finishes. | |
| 4724-XT-80 High Solids VT Alkyd Copolymer Resin | Gabriel Performance Products | 4724-XT-80 High Solids VT Alkyd Copolymer Resin is supplied at 80% non- volatile in a blend of xylene and toluene. The resin exhibits rapid dry, good toughness, and hardness. It is intended for use in fast drying industrial finishes with low VOCs. | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 4870-M-70 Alkyd Resin | Gabriel Performance Products | 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...もっと表示する 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. 表示を減らす | |
| 4929-X-50 Silicone Modified Short Oil Alkyd | Gabriel Performance Products | 4929-X-50 Silicone Modified Short Oil Alkyd is a fast air dry silicone modified alkyd for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. | |
| 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd | Gabriel Performance Products | 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd based on tall oil. It is recommended for high solids industrial enamels and primers. This resin has an extremely fast set time and rate of through dry. | |
| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...もっと表示する 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. 表示を減らす | |
| 5017-M-60 Chlorendic Modified Alkyd Resin | Gabriel Performance Products | 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time. | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5063-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film...もっと表示する 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film properties at the same time. 表示を減らす | |
| 5075-BS-85 Water Reducible Saturated Polyester Resin | Gabriel Performance Products | 5075-BS-85 Water Reducible Saturated Polyester Resin is a fast curing water reducible polyester resin intended for industrial and OEM finishes. | |
| 6400-7D | Guangzhou Baohui Resin Co., Ltd. | 6400-7D is an acrylic acid resin appearing as a clear, transparent liquid. It increases the strength of paint membranes based on various energies produced by UV conduction and solidification. 6400-7D is most commonly used to reduce the solidification of U...もっと表示する 6400-7D is an acrylic acid resin appearing as a clear, transparent liquid. It increases the strength of paint membranes based on various energies produced by UV conduction and solidification. 6400-7D is most commonly used to reduce the solidification of UV concentration in the presence of high energy and present cracking in thick membranes. 表示を減らす | |
| 75-62S Acrylic Resin | Guangzhou Baohui Resin Co., Ltd. | 75-62S Acrylic Resin is a light-cured primer thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring compatibility with nitrocotton and cellulose acetate, 75-62S Acrylic Resin adheres to UV light-cured paint films to provide resist...もっと表示する 75-62S Acrylic Resin is a light-cured primer thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring compatibility with nitrocotton and cellulose acetate, 75-62S Acrylic Resin adheres to UV light-cured paint films to provide resistance to water boning and high temperatures when used with UV. 表示を減らす | |
| AB-70F | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-70F is NMP free aliphatic urethane dispersion with good gloss, flow, water resistance, adhesion, tough, flexible, and is applicable in mold coatings. It is applicable for numerous different coatings such as, plastic, industrial, and more. | |
| AB-72FD | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-72FD is NMP free aliphatic urethane dispersion with good chemical resistance, high clarity, solvent resistance, and good scratch and mar resistance. It is applicable for numerous different coatings such as, plastic, metal, wood, industrial, and more. | |
| AB-91F | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-91F is NMP free aliphatic urethane dispersion that has medium hardness, good hydrolytic stability, tough, good adhesion, and more. It is applicable for numerous different coatings such as, plastic, metal, industrial, and more. | |
| Accoat 1G | Accoat A/S | Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...もっと表示する Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accoat 2G | Accoat A/S | Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...もっと表示する Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accofal 1G54 | Accoat A/S | Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...もっと表示する Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accofal 2G54 | Accoat A/S | Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...もっと表示する Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accofal 3G | Accoat A/S | Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pro...もっと表示する Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accofal 3G54 | Accoat A/S | Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...もっと表示する Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accolan G | Accoat A/S | Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...もっと表示する Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in the glue, varnish and paint industries as a coating for a mixing vats, regular vats and other processing equipment. 表示を減らす | |
| Accolan LB | Accoat A/S | Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and...もっと表示する Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 表示を減らす | |
| Accolan S | Accoat A/S | Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust...もっと表示する Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 表示を減らす | |
| Accolan Silver | Accoat A/S | Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and ...もっと表示する Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is safe to use in the foodstuffs industry, particularly in mixers, on conveyer belts and in dough vats. It is also an excellent coating for cutting tools, knives and freeze-drying trays. 表示を減らす | |
| Accoshield | Accoat A/S | Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have bee...もっと表示する Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in industries where corrosion protection at high temperatures are required. 表示を減らす | |
| Accotron | Accoat A/S | Accotron is a dark grey or green colored fluoropolymer coating. It is applied to products mainly to improve anti-corrosive attributes. This product is used in the paints and coatings industry. | |
| ACMO | Rahn AG | ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the a...もっと表示する ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. ACMO can be applied to the following applications: screen inks and varnishes; plastic coatings; laminating adhesives; printed circuit boards; and industrial coatings. 表示を減らす | Request Sample |
| Acronal® PRO80 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PRO80 is an APEO- and zinc-free acrylic emulsion. It has excellent anti-corrosion protection and barrier to humidity. This product has good adhesion, good early rain resistance, and high pigmentability with anti-corrosive pigments. It is recommen...もっと表示する Acronal® PRO80 is an APEO- and zinc-free acrylic emulsion. It has excellent anti-corrosion protection and barrier to humidity. This product has good adhesion, good early rain resistance, and high pigmentability with anti-corrosive pigments. It is recommended for high build primer, mid-coat and topcoat metal coatings. 表示を減らす | |
| AEROSIL® R 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia. | Request Sample |
| AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
| Ancamide® 220 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings. | Request Sample |
| ANCAMIDE® 220-IPA-73 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-IPA-73 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers, and coatings for concrete. | Request Sample |
| ANCAMIDE 221® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excelle...もっと表示する ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 表示を減らす | Request Sample |
| ANCAMIDE 221-X70® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xyle...もっと表示する ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xylene. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 表示を減らす | Request Sample |
| Aqualac AYD-127 | Aquent Impex | Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...もっと表示する Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). 表示を減らす | |
| Aqualac AYD-128 | Aquent Impex | Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...もっと表示する Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). 表示を減らす | |
| Araldite® GT 6099 | Jubail Chemical Industries Co. | Araldite® GT 6099 is a high molecular weight, solid epoxy resin based on Bisphenol A. This product is characterized by its deep-drawing capability, flexibility, impact resistance, and chemical resistance. Araldite® GT 6099 is used in the formulation of he...もっと表示する Araldite® GT 6099 is a high molecular weight, solid epoxy resin based on Bisphenol A. This product is characterized by its deep-drawing capability, flexibility, impact resistance, and chemical resistance. Araldite® GT 6099 is used in the formulation of heat-curing primers and enamels as well as anti-corrosion paints when combined with polyisocyanates. 表示を減らす | |
| Araldite® GT 6609 | Jubail Chemical Industries Co. | Araldite® GT 6609 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, flexibility, impact resistance, and chemical resistance. Araldite® GT 6609 is used in the formulation of baking pr...もっと表示する Araldite® GT 6609 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, flexibility, impact resistance, and chemical resistance. Araldite® GT 6609 is used in the formulation of baking primers and enamels as well as cold-curing coatings when combined with polyisocyanates. 表示を減らす | |
| Araldite® GT 7071 | Jubail Chemical Industries Co. | Araldite® GT 7071 is a low melting, solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion ...もっと表示する Araldite® GT 7071 is a low melting, solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Araldite® GT 7071 is designed for use in the formulation of protective coating systems and decorative coating systems. 表示を減らす | |
| Araldite® GT 7072 | Jubail Chemical Industries Co. | Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. A...もっと表示する Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Araldite® GT 7072 is designed for use in high performance coating systems. 表示を減らす | |
| Araldite® GT 7074 | Jubail Chemical Industries Co. | Araldite® GT 7074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Araldite® GT 7074 is designed for use in the formu...もっと表示する Araldite® GT 7074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Araldite® GT 7074 is designed for use in the formulation of functional powder coating systems like pipe and rebar applications. 表示を減らす | |
| Araldite® GZ 471 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 471 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Araldite® GZ 471 X 7...もっと表示する Araldite® GZ 471 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Araldite® GZ 471 X 75 is used in the formulation of acrylic resin system coatings, marine maintenance, and protective coatings applications. 表示を減らす | |
| Araldite® GZ 7071 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 70...もっと表示する Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 7071 X 75 is used in the formulation for adhesive primers, anti-corrosive primers, zinc dust primers, top coats, and clear lacquers. 表示を減らす | |
| ASCOTRAN® H30 | ASCOTEC | ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very se...もっと表示する ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 表示を減らす | Request Sample |
| Aspartic Ester Resin Sunaspar SN220 | Suny Chem 烟台信谊化工有限公司 | Aspartic Ester Resin Sunaspar SN220 is a solvent free amine-functional aspartic ester resin used as a reactive partner for polyisocyanates. It's used in adhesive fields, anti-corrosion surface coating for steel structure, oil pipeline, heavy and light cor...もっと表示する Aspartic Ester Resin Sunaspar SN220 is a solvent free amine-functional aspartic ester resin used as a reactive partner for polyisocyanates. It's used in adhesive fields, anti-corrosion surface coating for steel structure, oil pipeline, heavy and light corrosion protection, bubble landscape coating, fan blade coating and concrete water proofing materials. 表示を減らす | |
| Aspartic Ester Resin Sunaspar SN520 | Suny Chem 烟台信谊化工有限公司 | Sunaspar SN520 is a solvent free amine-functional aspartic ester resin used as reactive partner for polyisocyanates. This product has high solid content, low viscosity, and excellent compatibility with most hydroxy acrylate resins. It offers excellent ha...もっと表示する Sunaspar SN520 is a solvent free amine-functional aspartic ester resin used as reactive partner for polyisocyanates. This product has high solid content, low viscosity, and excellent compatibility with most hydroxy acrylate resins. It offers excellent hardness, fullness, leveling and gloss properties. It also has good resistance to weather, solvents, acids and alkalies and saline water. This product is widely used in automobile, industrial, and anti-corrosion paints. 表示を減らす | |
| BAM 203 X-60 | Bonyan Kala Chemie Co. | BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at...もっと表示する BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at 25°C and is mainly used in auto body repair paints, metallic paints, industrial machinery coatings, metal structural coatings, and industrial air-drying paints. 表示を減らす | |
| BAM 204 WS-50 | Bonyan Kala Chemie Co. | BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke ...もっと表示する BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke at 25°C and is mainly used in cabinet and spray paints, industrial air-drying paints, metal structural coatings, industrial machinery coatings, paste for architectural paints, and anti-corrosion primers. 表示を減らす | |
| BAM 208 WSX-55 | Bonyan Kala Chemie Co. | BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke ...もっと表示する BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, cabinet and spray paints, and industrial air-drying paints. 表示を減らす | |
| BAM 212 X-60 | Bonyan Kala Chemie Co. | BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at ...もっと表示する BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, metallic paints, industrial air-drying paints, and paint paste. 表示を減らす | |
| BAS 305 X-50 | Bonyan Kala Chemie Co. | BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in...もっと表示する BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in hammer finish paints, anti-corrosion primers, fast dry paints, and industrial air-drying paints. 表示を減らす | |
| BAS 310 H X-60 | Bonyan Kala Chemie Co. | BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly use...もっと表示する BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 表示を減らす | |
| BAS 310 L X-60 | Bonyan Kala Chemie Co. | BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly use...もっと表示する BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 表示を減らす | |
| BAS 312 X-60 | Bonyan Kala Chemie Co. | BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used i...もっと表示する BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 表示を減らす | |
| BAS 313 X-60 | Bonyan Kala Chemie Co. | BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used...もっと表示する BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 表示を減らす | |
| Bayhydur® 401-60 PGDA | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® 401-60 PGDA is a hydrophilically modified aliphatic polyisocyanate based on isophorone diisocyanate (IPDI). Bayhydur® 401-60 PGDA might be used as co-reactant for aqueous resins and as hardener for chemically resistant and weather-stable coating...もっと表示する Bayhydur® 401-60 PGDA is a hydrophilically modified aliphatic polyisocyanate based on isophorone diisocyanate (IPDI). Bayhydur® 401-60 PGDA might be used as co-reactant for aqueous resins and as hardener for chemically resistant and weather-stable coating systems. 表示を減らす | |
| Benasol 4V | Benasedo | Benasol 4V is a very fast air drying alkyd resin phenolic modified having good through dry. It is especially recommended for rust-inhibitive metal and nitrocellulose non lifting primers, fast air–drying enamels for farm and industrial equipment. | |
| BENASOL AS 3716 | Benasedo | BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber...もっと表示する BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. 表示を減らす | |
| BENASOL HS 6922 | Benasedo | BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...もっと表示する BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 表示を減らす | |
| BENASOL HS 7100 | Benasedo | BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...もっと表示する BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 表示を減らす | |
| BENASOL L 50 AV | Benasedo | BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...もっと表示する BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. 表示を減らす | |
| Benester 896 | Benasedo | Benester 896 is a saturated polyester resin, slightly branched, endowed with excellent mechanical properties, high reactivity, good flow and brightness. It is employed, crosslinked with amino-resins or blocked polyisocyanates, in industrial baking primers...もっと表示する Benester 896 is a saturated polyester resin, slightly branched, endowed with excellent mechanical properties, high reactivity, good flow and brightness. It is employed, crosslinked with amino-resins or blocked polyisocyanates, in industrial baking primers and enamels, particularly for base- coats and over-print varnishes with good printability properties also with UV inks, in cans, spray-bottles and collapsible tubes. 表示を減らす | |
| BENTONE® DY | Elementis 海名斯特殊化学 | BENTONE® DY additive is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | Request Sample |
| Benzimidazolone Yellow H4G | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Benzimidazolone Yellow H4G is a greenish shade yellow pigment that features high color strength, good heat stability, and warping resistance. This product has a density of 1.57 g/cm3 and a pH value of 6.5-7.5. It is commonly used in decorative paints, ind...もっと表示する Benzimidazolone Yellow H4G is a greenish shade yellow pigment that features high color strength, good heat stability, and warping resistance. This product has a density of 1.57 g/cm3 and a pH value of 6.5-7.5. It is commonly used in decorative paints, industrial paints, and OEM paints. 表示を減らす | |
| Benzimidazolone Yellow S3G | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Benzimidazolone Yellow S3G is a greenish yellow pigment that features good heat stability, excellent light fastness, and weather fastness. This product has a density of 1.57 g/cm3 and a pH value of 6.5-7.5. It is commonly used in decorative paints, indust...もっと表示する Benzimidazolone Yellow S3G is a greenish yellow pigment that features good heat stability, excellent light fastness, and weather fastness. This product has a density of 1.57 g/cm3 and a pH value of 6.5-7.5. It is commonly used in decorative paints, industrial paints, and powder coatings. 表示を減らす | |
| BH-113 UV Resin | Guangzhou Baohui Resin Co., Ltd. | BH-113 UV Resin is a modified urethane acrylate of the middle functional group. This clear, transparent liquid can enhance the adhesion to metal and vacuum electroplating surface, improve the leveling status, and eliminate the spot and pinhole of coatings...もっと表示する BH-113 UV Resin is a modified urethane acrylate of the middle functional group. This clear, transparent liquid can enhance the adhesion to metal and vacuum electroplating surface, improve the leveling status, and eliminate the spot and pinhole of coatings. BH-113 UV Resin enhances coating surface cleanness and humid packaging performance of pigments, and water boiling resistance of coatings. 表示を減らす | |
| BH-2006 Special Auxillary | Guangzhou Baohui Resin Co., Ltd. | BH-2006 Special Auxillary is a phosphate containing an hydroxyl functional group. Appearing as an amber liquid, it functions to improve the adhesion of solvent type and water coatings to metal substrates by bonding directly to them. It also improves the f...もっと表示する BH-2006 Special Auxillary is a phosphate containing an hydroxyl functional group. Appearing as an amber liquid, it functions to improve the adhesion of solvent type and water coatings to metal substrates by bonding directly to them. It also improves the flexibility and anti-corrosive performance of coatings. Applications for BH-2006 include industrial and anti-corrosive coatings, in acid solidification primers, and in coatings with resin as a base stock. 表示を減らす | |
| BH-2300 | Guangzhou Baohui Resin Co., Ltd. | BH-2300 is a modified acrylic resin appearing as a light yellow liquid. The surface of the paint membrane has photo mask effect, anti-alcohol, excellent laser carving effect and layer density. It can be used as UV primer and compatible to the anti-falling...もっと表示する BH-2300 is a modified acrylic resin appearing as a light yellow liquid. The surface of the paint membrane has photo mask effect, anti-alcohol, excellent laser carving effect and layer density. It can be used as UV primer and compatible to the anti-falling auxiliary. BH-2300 is commonly used in the formulation of coatings requiring an electroplating effect. 表示を減らす | |
| BH-233 | Guangzhou Baohui Resin Co., Ltd. | BH-233 is a mixture of modified acrylic acid resin and solvent appearing as a light yellow liquid. It provides a photo mask effect, laser carving effect, and layer density to the surface of paint membranes. BH-233 can be used as a UV primer and is suitabl...もっと表示する BH-233 is a mixture of modified acrylic acid resin and solvent appearing as a light yellow liquid. It provides a photo mask effect, laser carving effect, and layer density to the surface of paint membranes. BH-233 can be used as a UV primer and is suitable for the formulation of electroplating effects in coatings. 表示を減らす | |
| BH-533 | Guangzhou Baohui Resin Co., Ltd. | BH-533 is a dual-function PUA resin with weathering resistance and flexibility. This clear, transparent liquid has resistance to yellowing, and high and low temperature and thermal cycling performance. BH-533 finds application in UV plastic coatings. | |
| BH-6200-3G | Guangzhou Baohui Resin Co., Ltd. | BH-6200-3G is a polyurethane acrylic acid oligomer with comprehensive performance. This clear, transparent liquid provides leveling and waterproof properties, and RCA resistance. It is commonly applied to laptop UV, shells of mobile phones, and key-press ...もっと表示する BH-6200-3G is a polyurethane acrylic acid oligomer with comprehensive performance. This clear, transparent liquid provides leveling and waterproof properties, and RCA resistance. It is commonly applied to laptop UV, shells of mobile phones, and key-press UV to overcome whitening, pinhole and sagging problems in thick coatings. 6200-3G finds application in NB UV plastic paint and mobile UV plastic paints. 表示を減らす | |
| BH-66 UV Resin | Guangzhou Baohui Resin Co., Ltd. | BH-66 UV Resin is a modified polyester acrylate featuring UV radiation solidification performance. This clear, transparent liquid functions as a UV resin and enhances the light solidification speed rate in printing ink systems, reduces the consumption qua...もっと表示する BH-66 UV Resin is a modified polyester acrylate featuring UV radiation solidification performance. This clear, transparent liquid functions as a UV resin and enhances the light solidification speed rate in printing ink systems, reduces the consumption quantity of the photo initiator, and enhances the proportion of formula middle pigment and filling. BH-66 has adhesion force, hardness, and bruise resistance performance. It can be used in bruise-resistant coating systems. 表示を減らす | |
| BH-9002 | Guangzhou Baohui Resin Co., Ltd. | BH-9002 is a mirror silver resin appearing as a light yellow powder. Functions include strengthening adhesion, viscosity, rigidness, hardness, and chemical resistance. BH-9002 finds application in coatings requiring waterproof and anti-chemical properties...もっと表示する BH-9002 is a mirror silver resin appearing as a light yellow powder. Functions include strengthening adhesion, viscosity, rigidness, hardness, and chemical resistance. BH-9002 finds application in coatings requiring waterproof and anti-chemical properties. 表示を減らす | |
| BH368 | Guangzhou Baohui Resin Co., Ltd. | BH368 is an acrylic polyester resin appearing as a transparent liquid. This product does not yellow, provides flexibility, and finds application in varnish finishes of ultraviolet ray solidification and printing inks. | |
| BH382 | Guangzhou Baohui Resin Co., Ltd. | BH382 is a UV resin appearing as a transparent liquid. This product is commonly used for the preparation of ultraviolet solidification wood coatings of half matt, matt, or full matt. BH382 also finds application as varnish for UV curing and printing inks. | |
| Boltorn™ H2004 | Perstorp | Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Bolt...もっと表示する Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Boltorn™ H2004 improves ink transfer at high speeds in printing applications and is also used in UV-curable resins and industrial coatings. 表示を減らす | |
| Brominated Epoxy Oligomers | Hainan Zhongxin Chemical Co., Ltd. | Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excelle...もっと表示する Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excellent thermal and light stability. 表示を減らす | |
| Brominated Polystyrene | Hainan Zhongxin Chemical Co., Ltd. | Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(...もっと表示する Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(nylon) ect. 表示を減らす | |
| BYD-1008 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1008, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in industrial paints, leather paints, and wood paints. This product is resistant to solvents and alcohol. It is durable for kinkin...もっと表示する BYD-1008, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in industrial paints, leather paints, and wood paints. This product is resistant to solvents and alcohol. It is durable for kinking applications and is resistant to yellowing. 表示を減らす | |
| BYD-1016 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1016, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne industrial paints, wood paints, glass paints, and leather varnishes. This product is non-toxic. Its substrate is an ...もっと表示する BYD-1016, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne industrial paints, wood paints, glass paints, and leather varnishes. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. 表示を減らす | |
| BYK-1616 | BYK 毕克 | BYK-1616 is a silicone-containing defoamer for aqueous printing inks and overprint varnishes, as well as aqueous wood and furniture coatings and general industrial coatings. | |
| BYK-1641 | BYK 毕克 | BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio. | |
| BYK-3540 | BYK 毕克 | BYK-3540 is a silicone- and APEO-free leveling additive for automotive and industrial coatings, especially ED coatings, used to avoid surface defects with a simultaneous defoaming effect. | |
| BYK-3568 | BYK 毕克 | BYK-3568 is a surface-active additive to improve leveling and increase the surface energy of solvent-borne, 100 %, and UV systems, with a medium reduction in surface tension and a medium increase in surface slip. | |
| CH-910 | Yangzhou Chenhua New Material CO., LTD. | CH-910 is a milky liquid which is an aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and a clear luster. CH-910 is used as a rigid substrate coating. | |
| CH-911 | Yangzhou Chenhua New Material CO., LTD. | CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance ...もっと表示する CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance to coatings. 表示を減らす | |
| CH-920 | Yangzhou Chenhua New Material CO., LTD. | CH-920 is a milky liquid which is an aromatic water-borne polyurethane resin. This product has an anionic lonic charge and a luster of 96 60oC. CH-920 is used as a rigid substrate coating. | |
| CH-940 | Yangzhou Chenhua New Material CO., LTD. | CH-940 is a milky liquid which is a aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and an elongation of 100 percent. Ch-940 is used as a rigid substrate coating. | |
| Chlorinated Rubber TR1-CR-1 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...もっと表示する Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 表示を減らす | |
| Chlorinated Rubber TR1-CR-2 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine...もっと表示する Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 表示を減らす | |
| Chlorinated Rubber TR1-CR-3 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marin...もっと表示する Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 表示を減らす | |
| Chlorinated Rubber TR1-CR-4 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...もっと表示する Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 表示を減らす | |
| Crestakyd® 10-3000 | Scott Bader | Crestakyd® 10-3000 is an air drying alkyd with excellent brushability & flow characteristics, as well as good gloss retention & weathering resistance for top quality gloss paints used in both decorative and marine applications. | |
| Crestakyd® 20-5024 | Scott Bader | Crestakyd® 20-5024 is used for air drying and low bake industrial finishes. | |
| Crestakyd® 20-5029 | Scott Bader | Crestakyd® 20-5029 is a chain stopped alkyd used for general industrial air drying finishes and machinery enamels. | |
| Crestakyd® 20-5036 | Scott Bader | Crestakyd® 20-5036 is a chain stopped alkyd used for general industrial air drying primers and enamels. | |
| Crestakyd® 20-9021 | Scott Bader | Crestakyd® 20-9021 is an economical chain stopped alkyd used for fast drying machinery enamels. |
