| 6400-7D | Guangzhou Baohui Resin Co., Ltd. | 6400-7D is an acrylic acid resin appearing as a clear, transparent liquid. It increases the strength of paint membranes based on various energies produced by UV conduction and solidification. 6400-7D is most commonly used to reduce the solidification of U...もっと表示する 6400-7D is an acrylic acid resin appearing as a clear, transparent liquid. It increases the strength of paint membranes based on various energies produced by UV conduction and solidification. 6400-7D is most commonly used to reduce the solidification of UV concentration in the presence of high energy and present cracking in thick membranes. 表示を減らす | |
| 75-62S Acrylic Resin | Guangzhou Baohui Resin Co., Ltd. | 75-62S Acrylic Resin is a light-cured primer thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring compatibility with nitrocotton and cellulose acetate, 75-62S Acrylic Resin adheres to UV light-cured paint films to provide resist...もっと表示する 75-62S Acrylic Resin is a light-cured primer thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring compatibility with nitrocotton and cellulose acetate, 75-62S Acrylic Resin adheres to UV light-cured paint films to provide resistance to water boning and high temperatures when used with UV. 表示を減らす | |
| BH-113 UV Resin | Guangzhou Baohui Resin Co., Ltd. | BH-113 UV Resin is a modified urethane acrylate of the middle functional group. This clear, transparent liquid can enhance the adhesion to metal and vacuum electroplating surface, improve the leveling status, and eliminate the spot and pinhole of coatings...もっと表示する BH-113 UV Resin is a modified urethane acrylate of the middle functional group. This clear, transparent liquid can enhance the adhesion to metal and vacuum electroplating surface, improve the leveling status, and eliminate the spot and pinhole of coatings. BH-113 UV Resin enhances coating surface cleanness and humid packaging performance of pigments, and water boiling resistance of coatings. 表示を減らす | |
| BH-2300 | Guangzhou Baohui Resin Co., Ltd. | BH-2300 is a modified acrylic resin appearing as a light yellow liquid. The surface of the paint membrane has photo mask effect, anti-alcohol, excellent laser carving effect and layer density. It can be used as UV primer and compatible to the anti-falling...もっと表示する BH-2300 is a modified acrylic resin appearing as a light yellow liquid. The surface of the paint membrane has photo mask effect, anti-alcohol, excellent laser carving effect and layer density. It can be used as UV primer and compatible to the anti-falling auxiliary. BH-2300 is commonly used in the formulation of coatings requiring an electroplating effect. 表示を減らす | |
| BH-233 | Guangzhou Baohui Resin Co., Ltd. | BH-233 is a mixture of modified acrylic acid resin and solvent appearing as a light yellow liquid. It provides a photo mask effect, laser carving effect, and layer density to the surface of paint membranes. BH-233 can be used as a UV primer and is suitabl...もっと表示する BH-233 is a mixture of modified acrylic acid resin and solvent appearing as a light yellow liquid. It provides a photo mask effect, laser carving effect, and layer density to the surface of paint membranes. BH-233 can be used as a UV primer and is suitable for the formulation of electroplating effects in coatings. 表示を減らす | |
| BH-533 | Guangzhou Baohui Resin Co., Ltd. | BH-533 is a dual-function PUA resin with weathering resistance and flexibility. This clear, transparent liquid has resistance to yellowing, and high and low temperature and thermal cycling performance. BH-533 finds application in UV plastic coatings. | |
| BH-6200-3G | Guangzhou Baohui Resin Co., Ltd. | BH-6200-3G is a polyurethane acrylic acid oligomer with comprehensive performance. This clear, transparent liquid provides leveling and waterproof properties, and RCA resistance. It is commonly applied to laptop UV, shells of mobile phones, and key-press ...もっと表示する BH-6200-3G is a polyurethane acrylic acid oligomer with comprehensive performance. This clear, transparent liquid provides leveling and waterproof properties, and RCA resistance. It is commonly applied to laptop UV, shells of mobile phones, and key-press UV to overcome whitening, pinhole and sagging problems in thick coatings. 6200-3G finds application in NB UV plastic paint and mobile UV plastic paints. 表示を減らす | |
| BH-66 UV Resin | Guangzhou Baohui Resin Co., Ltd. | BH-66 UV Resin is a modified polyester acrylate featuring UV radiation solidification performance. This clear, transparent liquid functions as a UV resin and enhances the light solidification speed rate in printing ink systems, reduces the consumption qua...もっと表示する BH-66 UV Resin is a modified polyester acrylate featuring UV radiation solidification performance. This clear, transparent liquid functions as a UV resin and enhances the light solidification speed rate in printing ink systems, reduces the consumption quantity of the photo initiator, and enhances the proportion of formula middle pigment and filling. BH-66 has adhesion force, hardness, and bruise resistance performance. It can be used in bruise-resistant coating systems. 表示を減らす | |
| BH368 | Guangzhou Baohui Resin Co., Ltd. | BH368 is an acrylic polyester resin appearing as a transparent liquid. This product does not yellow, provides flexibility, and finds application in varnish finishes of ultraviolet ray solidification and printing inks. | |
| BH382 | Guangzhou Baohui Resin Co., Ltd. | BH382 is a UV resin appearing as a transparent liquid. This product is commonly used for the preparation of ultraviolet solidification wood coatings of half matt, matt, or full matt. BH382 also finds application as varnish for UV curing and printing inks. | |
| DEXICRYL 3082 | DEX-VIN POLYMERS PVT LTD | DEXICRYL 3082 is a 100% acrylic emulsion with a large particle size. This product appears as a milky white acrylic co-polymer dispersion in water. It can be used in exterior and interior paint applications. DEXICRYL 3082 provides excellent resistance to...もっと表示する DEXICRYL 3082 is a 100% acrylic emulsion with a large particle size. This product appears as a milky white acrylic co-polymer dispersion in water. It can be used in exterior and interior paint applications. DEXICRYL 3082 provides excellent resistance to heat, light, and UV radiation. 表示を減らす | |
| Disvacryl-1019 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1019 is an acrylic polyol resin. This product includes xylene as a volatile byproduct. It can be used in fast-drying polyurethane coatings with good UV resistance. It can also be used in wood coatings. | |
| Flatting Agent 776 | Guangzhou Baohui Resin Co., Ltd. | Flatting Agent 776 is an organic silicon of alkylaryl modification appearing as a clear liquid. This paint additive provides a smoother feel and enhances flattening properties while increasing bruise resistance. This product is commonly used in elastic ru...もっと表示する Flatting Agent 776 is an organic silicon of alkylaryl modification appearing as a clear liquid. This paint additive provides a smoother feel and enhances flattening properties while increasing bruise resistance. This product is commonly used in elastic rubber paints and UV paints. 表示を減らす | |
| Hauthane HD-2334 | Hauthaway | Hauthane HD-2334 is a co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion. It was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 w...もっと表示する Hauthane HD-2334 is a co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion. It was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 will enable synthetic fabrics to pass various FR tests including NFPA-701, MVSS-302 and others. The film properties of HD-2334 also provide a stiff hand and excellent molding/pleating properties. Due to its aliphatic composition, excellent UV resistance is also exhibited. 表示を減らす | |
| Hauthane L-3101 | Hauthaway | Hauthane L-3101 is a very hard, NMP-free/APEO-free, polycarbonate-based, aliphatic, waterborne polyurethane dispersion. It was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. L-3101 ...もっと表示する Hauthane L-3101 is a very hard, NMP-free/APEO-free, polycarbonate-based, aliphatic, waterborne polyurethane dispersion. It was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. L-3101 is ideally suited for exterior applications where film durability and longevity are important considerations. L-3101 may be used as a sole vehicle or blended with acrylic emulsions for application by conventional or air-assisted spray equipment. It may be thickened with associative thickeners to attain desired application rheology. 表示を減らす | |
| Picassian® AC-049 | Stahl Polymers | Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss p...もっと表示する Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss properties, high UV resistance properties, and good outdoor durability. 表示を減らす | |
| Picassian® AC-176 | Stahl Polymers | Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistanc...もっと表示する Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistance, has good adhesion properties on a varity of metallic and plastic substrates, has good mechanical properties, and makes films clear, hard, flexiable, and glossy. 表示を減らす | |
| Picassian® AC-177 | Stahl Polymers | Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion p...もっと表示する Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion properties with plastic and metallic substrates, good outdoor resistance properties, good UV resistance properties, and good mechanical properties. 表示を減らす | |
| Syna-Epoxy 06 | Synasia, Inc. | Syna-Epoxy 06 is a clear to pale yellowish liquid that is miscible with a wide range of organic solvents. It is miscible with acetone, ethanol and benzene. This product has low viscosity and good fluidity so it is able to be used in bulk manufacturing. It...もっと表示する Syna-Epoxy 06 is a clear to pale yellowish liquid that is miscible with a wide range of organic solvents. It is miscible with acetone, ethanol and benzene. This product has low viscosity and good fluidity so it is able to be used in bulk manufacturing. It can be used as a casting resin, in reinforced plastics and solvent-free adhesive for UV resistance and anti-radiation properties. It is a unique structure which also gives increased alkali and water resistance. 表示を減らす | |
| Syna-Epoxy 07 | Synasia, Inc. | Syna-Epoxy 07 is a clear to pale yellowish cycloaliphatic epoxide that is miscible with a wide range of organic solvents. It is miscible with acetone, ethanol and benzene. This product has low viscosity and good fluidity so it is able to be used in bulk m...もっと表示する Syna-Epoxy 07 is a clear to pale yellowish cycloaliphatic epoxide that is miscible with a wide range of organic solvents. It is miscible with acetone, ethanol and benzene. This product has low viscosity and good fluidity so it is able to be used in bulk manufacturing. It can be used as a casting resin, in reinforced plastics and solvent-free adhesive for UV resistance and anti-radiation properties. It is a unique structure which also gives increased alkali and water resistance. This product is used when applications require viscosities that are lower than can be achieved with Syna-Epoxy 21. 表示を減らす | |
| Syna-Epoxy 21 | Synasia, Inc. | Syna-Epoxy 21 is a clear to pale yellowish liquid that is miscible with a wide range of organic solvents. It is miscible with acetone, ethanol and benzene. This product has low viscosity and good fluidity so it is able to be used in bulk manufacturing. It...もっと表示する Syna-Epoxy 21 is a clear to pale yellowish liquid that is miscible with a wide range of organic solvents. It is miscible with acetone, ethanol and benzene. This product has low viscosity and good fluidity so it is able to be used in bulk manufacturing. It can be used as a casting resin, in reinforced plastics and solvent-free adhesive for UV resistance and anti-radiation properties. It is a unique structure which also gives increased alkali and water resistance. 表示を減らす | |
| Ultrafine™ 1WLS A | Lawter | Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve perfor...もっと表示する Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve performance. Ultrafine™ 1WLS A is used in UV, metal deco and overprint varnishes, in heatset and sheet-fed inks and in can, coil and wood powder coatings. 表示を減らす | |
| Ultrapoly™ 210 A | Lawter | Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earli...もっと表示する Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earliest phases of the printing process while developing toughness over time. It is ideally used in sheet-fed offset inks, in OPV, metal decorating and in UV inks. 表示を減らす | |
| UV-L-6011 Wax Liquor | Guangzhou Baohui Resin Co., Ltd. | UV-L-6011 Wax Liquor is a modified compound appearing as a white liquid. This paint additive provides a polishing and levelling effect while improving wear and bruise resistance in the paint membrane. This product is commonly used in plastic coatings. | |
| UV531 | Guangzhou Baohui Resin Co., Ltd. | UV531 is a modified polyurenthane prepolymer with three functions. This clear, transparent liquid has medium viscosity and is characterized by leveling properties. UV531 provides additive color performance and is used to improve the adhesion of UV varnish...もっと表示する UV531 is a modified polyurenthane prepolymer with three functions. This clear, transparent liquid has medium viscosity and is characterized by leveling properties. UV531 provides additive color performance and is used to improve the adhesion of UV varnish finish construction to the primer and substrate. It finds application in UV system paints. 表示を減らす |
