| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...もっと表示する 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. 表示を減らす | |
| Akuapol AL 2200 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2200 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 2300 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2300 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 2400 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2400 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 4500 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 4500 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Aqualac AYDW-112W50 | Aquent Impex | Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epo...もっと表示する Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epoxy makes this high performance organic & inorganic compound available with the high performance epoxy resin as a precondition. The outstanding advantage of waterborne epoxy resin lies on that this compound can be cured at atmospheric temperature & humidity with reasonable curing time. It can be mixed with such common cement-based material as cement mortar & concrete to enhance the early strength, tenacity, impact resistance & waterproof ability of above materials with very high cross-linking density. Applications include environmentally friendly, paint, car coatings, and cement floors. 表示を減らす | |
| Aqualac AYDW-113W50 | Aquent Impex | Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epo...もっと表示する Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epoxy makes this high performance organic & inorganic compound available with the high performance epoxy resin as a precondition. The outstanding advantage of waterborne epoxy resin lies on that this compound can be cured at atmospheric temperature & humidity with reasonable curing time. It can be mixed with such common cement-based material as cement mortar & concrete to enhance the early strength, tenacity, impact resistance & waterproof ability of above materials with very high cross-linking density. Applications include environmentally friendly, paint, car coatings, and cement floors. 表示を減らす | |
| AR-531 | Chan Sieh Enterprises Co, Ltd. | AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent ...もっと表示する AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent in alcohols, ketones, aromatics, and esters. 表示を減らす | |
| Araldite® GY 250 | Jubail Chemical Industries Co. | Araldite® GY 250 is a universal purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Araldite® GY 250 is suitable for the formulation of solvent-fre...もっと表示する Araldite® GY 250 is a universal purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Araldite® GY 250 is suitable for the formulation of solvent-free coatings, self-leveling and mortar, flooring screeds, toweling compounds etc. when cured with polyamines, polyamidoamines or their adducts. 表示を減らす | |
| AS-500 | Chan Sieh Enterprises Co, Ltd. | AS-500 is an isocyanate ester polymer adhesive. This product appears as a white emulsion. It can be used in the construction of solid wood parquet flooring, artificial laminate strip blocking, the assembly of laminate plank floors, the construction of p...もっと表示する AS-500 is an isocyanate ester polymer adhesive. This product appears as a white emulsion. It can be used in the construction of solid wood parquet flooring, artificial laminate strip blocking, the assembly of laminate plank floors, the construction of plywood, and the construction of furniture. This product in particular is a two-component adhesive. If one mixes it with cross-linking agent CA-30, it will cure at low temperatures. AS-500 provides strong adhesion and is resistant to boiling water. This product contains no toxic or harmful ingredients like formalin or formaldehyde. 表示を減らす | |
| AT-3430 | Antex Chemicals (Zhongshan) Limited | AT-3430 is a veova acrylic copolymer emulsion that appears as a milky, white liquid and features excellent wear, water, alkali, and dirt pick-up resistance. This product features excellent durability, chemical, blush, and salt spray resistance, and high g...もっと表示する AT-3430 is a veova acrylic copolymer emulsion that appears as a milky, white liquid and features excellent wear, water, alkali, and dirt pick-up resistance. This product features excellent durability, chemical, blush, and salt spray resistance, and high gloss. It can be used to make metal coatings and floor paints. 表示を減らす | |
| Crestakyd® 10-3000 | Scott Bader | Crestakyd® 10-3000 is an air drying alkyd with excellent brushability & flow characteristics, as well as good gloss retention & weathering resistance for top quality gloss paints used in both decorative and marine applications. | |
| Crestakyd® 30-5067 | Scott Bader | Crestakyd® 30-5067 is a fast drying short oil alkyd supplied in xylene for use in air dry and force dry primers and topcoats. Also used for marine paints. | |
| Crestakyd® 30-5068 | Scott Bader | Crestakyd® 30-5068 is a fast drying short oil alkyd for use in air-dry and force-dry primers and topcoats. It is recommended for use in air dry and force dry primers and topcoats in a variety of general industrial metal coating applications. | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...もっと表示する DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 表示を減らす | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...もっと表示する DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 表示を減らす | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...もっと表示する DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 表示を減らす | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...もっと表示する DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 表示を減らす | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...もっと表示する DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 表示を減らす | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...もっと表示する DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 表示を減らす | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...もっと表示する DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 表示を減らす | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...もっと表示する DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 表示を減らす | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...もっと表示する DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 表示を減らす | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....もっと表示する DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. 表示を減らす | |
| Deco-Coat DC-2501R | Epoxies, Etc. | Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costu...もっと表示する Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costume and fashion jewelry, decals, labels, pins, emblems, and wooden floors and tables. 表示を減らす | |
| Disvamide-660 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-660 is a reactive polyamide resin. This product appears as a liquid. It can be used in high-build polyamide coatings, castings, potting, encapsulation, and flooring applications. | |
| Domide G-A0533 | Kukdo Chemical Co., Ltd. | Domide G-A0533 is a low-viscosity Polyamidoamine Resin designed for reaction with liquid or solid Epoxy Resins. It can be used as all or part for use in making sealants, electrical potting, casting, coatings and flooring applications. | |
| DOUBLEMER® 594 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | DOUBLEMER® 594 is an aliphatic urethane acrylate oligomer diluted 15~20 % with 1, 6-hexanediol diacrylate (HDODA) monomer. Films of DOUBLEMER® 594 cured by ultraviolet light (UV) or electron beam (EB) systems perform good abrasion resistance, stain resist...もっと表示する DOUBLEMER® 594 is an aliphatic urethane acrylate oligomer diluted 15~20 % with 1, 6-hexanediol diacrylate (HDODA) monomer. Films of DOUBLEMER® 594 cured by ultraviolet light (UV) or electron beam (EB) systems perform good abrasion resistance, stain resistance, toughness and the non-yellowing typical properties similar to those of an aliphatic urethane. Formulated UV/EB curable products containing DOUBLEMER® 594 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. This product is recommended for use in: wood and vinyl flooring; coatings on plastic; and clear coatings. 表示を減らす | |
| Epokukdo LGE | Kukdo Chemical Co., Ltd. | Epokukdo LGE is a reactive diluent which is glycidyl ether of a mixture of C12 - C14 aliphatic alcohols used in order to reduce the viscosity of epoxy resin. LGE is a monofunctional reactive diluent which has low toxicity, low vapor pressure and low volat...もっと表示する Epokukdo LGE is a reactive diluent which is glycidyl ether of a mixture of C12 - C14 aliphatic alcohols used in order to reduce the viscosity of epoxy resin. LGE is a monofunctional reactive diluent which has low toxicity, low vapor pressure and low volatile content. Also, LGE provides good flexibility and adhesion on nonpolar surfaces. Therefore, LGE can be used in various paints, floor coating, etc. 表示を減らす | |
| Epokukdo PG-202 | Kukdo Chemical Co., Ltd. | Epokukdo PG-202, difunctional reactive diluent is an aliphatic glycidyl ether, which is used for reducing the viscosity of epoxy resin systems. Since difunctional diluents, in general, may cause poor physical properties, the minimum amount of need should ...もっと表示する Epokukdo PG-202, difunctional reactive diluent is an aliphatic glycidyl ether, which is used for reducing the viscosity of epoxy resin systems. Since difunctional diluents, in general, may cause poor physical properties, the minimum amount of need should be used to achieve the desired viscosity reduction. PG-202, reactive diluent is suitable low volatile levels. Therefore, problems generated from poorly ventilated areas are minimized. It is recommended for laminates, exposed aggregate, potting and flooring applications. 表示を減らす | |
| Epokukdo UME-305 | Kukdo Chemical Co., Ltd. | Epokukdo UME-305 is an urethane prepolymer modified liquid epoxy resin. UME-305 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact st...もっと表示する Epokukdo UME-305 is an urethane prepolymer modified liquid epoxy resin. UME-305 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. 表示を減らす | |
| Epokukdo UME-315 | Kukdo Chemical Co., Ltd. | Epokukdo UME-315 is an Urethane prepolymer modified liquid epoxy resin. UME-315 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact st...もっと表示する Epokukdo UME-315 is an Urethane prepolymer modified liquid epoxy resin. UME-315 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. 表示を減らす | |
| Epokukdo UME-330 | Kukdo Chemical Co., Ltd. | Epokukdo UME-330 is an urethane pre-polymer modified liquid epoxy resin. UME-330 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact s...もっと表示する Epokukdo UME-330 is an urethane pre-polymer modified liquid epoxy resin. UME-330 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. 表示を減らす | |
| Epokukdo YD-112 | Kukdo Chemical Co., Ltd. | Epokukdo YD-112 is a Bisphenol-A type liquid epoxy resin diluted with PGE. YD-112 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and lower odor. YD-112 is generally used in high...もっと表示する Epokukdo YD-112 is a Bisphenol-A type liquid epoxy resin diluted with PGE. YD-112 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and lower odor. YD-112 is generally used in high solid coating, floor coating, troweling application, crack injection systems, adhesives and decoupage systems. 表示を減らす | |
| Epokukdo YD-113 | Kukdo Chemical Co., Ltd. | Epokukdo YD-113 is a Bisphenol-A type liquid epoxy resin diluted with CGE. YD-113 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and lower odor. YD-113 is generally used in high...もっと表示する Epokukdo YD-113 is a Bisphenol-A type liquid epoxy resin diluted with CGE. YD-113 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and lower odor. YD-113 is generally used in high solid coating, floor coating, troweling application, crack injection systems, adhesives and decoupage systems. 表示を減らす | |
| Epokukdo YD-114 | Kukdo Chemical Co., Ltd. | Epokukdo YD-114 is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic mini...もっと表示する Epokukdo YD-114 is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-114 is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids or low VOC industrial coatings. 表示を減らす | |
| Epokukdo YD-114E | Kukdo Chemical Co., Ltd. | Epokukdo YD-114E is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114E is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic mi...もっと表示する Epokukdo YD-114E is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114E is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-114E is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids or low VOC industrial coating. 表示を減らす | |
| Epokukdo YD-114EF | Kukdo Chemical Co., Ltd. | Epokukdo YD-114EF is a Bisphenol-A/F type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114EF is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxi...もっと表示する Epokukdo YD-114EF is a Bisphenol-A/F type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114EF is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxic minimum odor. YD-114EF is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system and high solids or low VOC industrial coatings. 表示を減らす | |
| Epokukdo YD-114F | Kukdo Chemical Co., Ltd. | Epokukdo YD-114F is a Bisphenol-A/F type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114EF is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxic...もっと表示する Epokukdo YD-114F is a Bisphenol-A/F type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114EF is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxic minimum odor. YD-114EF is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system and high solids or low VOC industrial coatings 表示を減らす | |
| Epokukdo YD-119 | Kukdo Chemical Co., Ltd. | Epokukdo YD-119 is a Bisphenol-A type liquid epoxy resin diluted with Neotohto-E. YD-119 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-119 is gen...もっと表示する Epokukdo YD-119 is a Bisphenol-A type liquid epoxy resin diluted with Neotohto-E. YD-119 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-119 is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids or low VOC industrial coatings. 表示を減らす | |
| Epotec® YD 012 X 75 | Aditya Birla | Epotec® YD 012 X 75 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved in xylene. This product is mainly used in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. | |
| Epotec® YD 128 X | Aditya Birla | Epotec® YD 128 X is a modified, medium viscosity, bisphenol-A-based epoxy resin which displays good chemical resistance, resistance to crystallization on storage, and pigment and filler wetting properties. This product is ideal for use in electrical, elec...もっと表示する Epotec® YD 128 X is a modified, medium viscosity, bisphenol-A-based epoxy resin which displays good chemical resistance, resistance to crystallization on storage, and pigment and filler wetting properties. This product is ideal for use in electrical, electronic, and flooring applications. 表示を減らす | |
| Epotec® YD 128 XX | Aditya Birla | Epotec® YD 128 XX is a medium viscosity, bisphenol-A-based modified epoxy resin which displays good chemical resistance, resistance to crystallization on storage, and pigment and filler wetting properties. This product is ideal for use in electrical, elec...もっと表示する Epotec® YD 128 XX is a medium viscosity, bisphenol-A-based modified epoxy resin which displays good chemical resistance, resistance to crystallization on storage, and pigment and filler wetting properties. This product is ideal for use in electrical, electronic, and flooring applications. 表示を減らす | |
| Epotec® YD 129 | Aditya Birla | Epotec® YD 129 is an unmodified, high viscosity, liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring appli...もっと表示する Epotec® YD 129 is an unmodified, high viscosity, liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. 表示を減らす | |
| Epotec® YD 134 A | Aditya Birla | Epotec® YD 134 A is an unmodified, semi-solid diglycidyl ether of bisphenol-A, dissolved in acetone for ease of handling. This product is ideal for use in coal tar-based coatings, adhesives, flooring applications, road coverings, and high solids protectiv...もっと表示する Epotec® YD 134 A is an unmodified, semi-solid diglycidyl ether of bisphenol-A, dissolved in acetone for ease of handling. This product is ideal for use in coal tar-based coatings, adhesives, flooring applications, road coverings, and high solids protective coatings. 表示を減らす | |
| Epotec® YD 134 X 80 | Aditya Birla | Epotec® YD 134 X 80 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 80% solid in xylene for ease of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-base...もっと表示する Epotec® YD 134 X 80 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 80% solid in xylene for ease of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. 表示を減らす | |
| Epotec® YD 134 X 90 | Aditya Birla | Epotec® YD 134 X 90 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 90% solid in xylene for easy of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-base...もっと表示する Epotec® YD 134 X 90 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 90% solid in xylene for easy of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. 表示を減らす | |
| Epotec® YD 508 | Aditya Birla | Epotec® YD 508 is a low viscosity, reactive diluent-modified liquid epoxy resin with a low crystallization tendency and good handling characteristics. This product is ideal for use in high solids coatings, self-leveling floor applications, and chemical re...もっと表示する Epotec® YD 508 is a low viscosity, reactive diluent-modified liquid epoxy resin with a low crystallization tendency and good handling characteristics. This product is ideal for use in high solids coatings, self-leveling floor applications, and chemical resistant coatings. 表示を減らす | |
| Epotec® YD 510 | Aditya Birla | Epotec® YD 510 is a low viscosity, reactive diluent-modified liquid epoxy resin which promotes low voc content and reduced crystallization tendency in final formulations. This product is ideal for use in high solids coatings, flooring applications, and pr...もっと表示する Epotec® YD 510 is a low viscosity, reactive diluent-modified liquid epoxy resin which promotes low voc content and reduced crystallization tendency in final formulations. This product is ideal for use in high solids coatings, flooring applications, and primers. 表示を減らす | |
| Epotec® YD 515 | Aditya Birla | Epotec® YD 515 is a bisphenol-A liquid epoxy resin, modified with reactive diluent, which displays reduced viscosity and surface tension. This product is ideal for use in self-leveling flooring applications, high solids and solvent-free coatings, and adhe...もっと表示する Epotec® YD 515 is a bisphenol-A liquid epoxy resin, modified with reactive diluent, which displays reduced viscosity and surface tension. This product is ideal for use in self-leveling flooring applications, high solids and solvent-free coatings, and adhesives. 表示を減らす | |
| Epotec® YD 517 V | Aditya Birla | Epotec® YD 517 V is a low viscosity, reactive diluent-modified liquid epoxy resin. This product is ideal for use in flooring applications and high solids coatings. | |
| Epotec® YD 522 | Aditya Birla | Epotec® YD 522 is a low viscosity bisphenol-A liquid epoxy resin, modified with a reactive diluent. The lower viscosity of this product allows for increased filler loading of a formulation. This product is ideal for use in self-leveling flooring applicati...もっと表示する Epotec® YD 522 is a low viscosity bisphenol-A liquid epoxy resin, modified with a reactive diluent. The lower viscosity of this product allows for increased filler loading of a formulation. This product is ideal for use in self-leveling flooring applications, high solids & solvent-free coatings, and adhesives. 表示を減らす | |
| Epotec® YDF 170 | Aditya Birla | Epotec® YDF 170 is a general-purpose, unmodified, low viscosity diglycidyl ether of bisphenol-F which displays good chemical resistance. This product is ideal for use in adhesives for electronic applications, chemical resistance coatings, industrial floor...もっと表示する Epotec® YDF 170 is a general-purpose, unmodified, low viscosity diglycidyl ether of bisphenol-F which displays good chemical resistance. This product is ideal for use in adhesives for electronic applications, chemical resistance coatings, industrial flooring applications, and laminates. 表示を減らす | |
| Epotec® YDF 170LV | Aditya Birla | Epotec® YDF 170LV is an unmodified, low viscosity diglycidyl ether of bisphenol-F. It can be used with standard bisphenol-A-based liquid epoxy resins and/or with epoxy reactive diluents. This product is ideal for use in adhesives, chemical resistant coati...もっと表示する Epotec® YDF 170LV is an unmodified, low viscosity diglycidyl ether of bisphenol-F. It can be used with standard bisphenol-A-based liquid epoxy resins and/or with epoxy reactive diluents. This product is ideal for use in adhesives, chemical resistant coatings, industrial flooring applications, and laminates. 表示を減らす | |
| Epotec® YDF 172 | Aditya Birla | Epotec® YDF 172 is an unmodified, low viscosity diglycidyl ether of bisphenol-F which is specially formulated to avoid operational problems related to crystallization in geographical locations with low temperature winters. This product is ideal for use in...もっと表示する Epotec® YDF 172 is an unmodified, low viscosity diglycidyl ether of bisphenol-F which is specially formulated to avoid operational problems related to crystallization in geographical locations with low temperature winters. This product is ideal for use in chemical resistance coatings, industrial flooring applications, laminates, adhesives for electronic applications, solvent-free coatings, and filament winding applications. 表示を減らす | |
| Epotec® YDF 173 | Aditya Birla | Epotec® YDF 173 is a higher functional novolac resin featuring improved thermal stability, hardness, mechanical strength, and resistance to various chemicals. This product is ideal for use in adhesives for electronic applications, chemical resistant coati...もっと表示する Epotec® YDF 173 is a higher functional novolac resin featuring improved thermal stability, hardness, mechanical strength, and resistance to various chemicals. This product is ideal for use in adhesives for electronic applications, chemical resistant coatings, industrial flooring applications, and laminates. 表示を減らす | |
| Epotec® YDFM 251 | Aditya Birla | Epotec® YDFM 251 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance and reduced viscosity. This product is i...もっと表示する Epotec® YDFM 251 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance and reduced viscosity. This product is ideal for use in high solids & solvent-free coatings, adhesives, solvent-free self leveling flooring applications, and marine & industrial protective coatings. 表示を減らす | |
| Epotec® YDFM 253 | Aditya Birla | Epotec® YDFM 253 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance, reduced viscosity, and lower surface t...もっと表示する Epotec® YDFM 253 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance, reduced viscosity, and lower surface tension. This product is ideal for use in high solids & solvent-free coatings, adhesives, solvent-free self leveling flooring applications, and marine & industrial protective coatings. 表示を減らす | |
| Epotec® YDFM 270 | Aditya Birla | Epotec® YDFM 270 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with a difunctional reactive diluent, featuring exceptional crystallization resistance. This product is ideal for use in high solids & ...もっと表示する Epotec® YDFM 270 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with a difunctional reactive diluent, featuring exceptional crystallization resistance. This product is ideal for use in high solids & solvent-free coatings, adhesives, solvent-free self-leveling flooring applications, and marine & industrial protective coatings. 表示を減らす | |
| Epoxy Resin E-20 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-...もっと表示する Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-corrosion coatings, zinc powder primers, floor coatings, decorative coatings and varnishes. 表示を減らす | |
| Epoxy Resin SF801 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatin...もっと表示する Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 450-520 g/eq and a softening point of 65-75°C. 表示を減らす | |
| Epoxy Resin SF801A | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coati...もっと表示する Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 530-570 g/eq and a softening point of 65-75°C. 表示を減らす | |
| Estergum-752 | D.S.V. Chemicals Pvt. Ltd. | Estergum-752 is an esterified rosin derivative. This product derives from glycerine polyols. It can be used in adhesives and wax systems in hot melt adhesives. Estergum-752 is compatible with vinyl copolymers that are used in synthetic floor tile adhes...もっと表示する Estergum-752 is an esterified rosin derivative. This product derives from glycerine polyols. It can be used in adhesives and wax systems in hot melt adhesives. Estergum-752 is compatible with vinyl copolymers that are used in synthetic floor tile adhesives. 表示を減らす | |
| Hanwha HB-100 | Hanwha Chemical Corporation | Hanwha HB-100 is a PSR resin paste made of Polyvinyl Chloride that adds a satisfactory deglossing / deglazing effect to most products. It is well suited for use in the production of flooring materials, wallpapers, tarpaulins and sealants wherever a matt-f...もっと表示する Hanwha HB-100 is a PSR resin paste made of Polyvinyl Chloride that adds a satisfactory deglossing / deglazing effect to most products. It is well suited for use in the production of flooring materials, wallpapers, tarpaulins and sealants wherever a matt-finishing effect is required. 表示を減らす | |
| Hanwha HB-65 | Hanwha Chemical Corporation | Hanwha HB-65 is a PSR resin paste made of Polyvinyl Chloride that adds a satisfactory deglossing / deglazing effect to most products. It is well suited for use in the production of flooring materials, wallpapers, tarpaulins and sealants wherever a matt-fi...もっと表示する Hanwha HB-65 is a PSR resin paste made of Polyvinyl Chloride that adds a satisfactory deglossing / deglazing effect to most products. It is well suited for use in the production of flooring materials, wallpapers, tarpaulins and sealants wherever a matt-finishing effect is required. 表示を減らす | |
| Hanwha KCH-12 | Hanwha Chemical Corporation | Hanwha KCH-12 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with a fast gelling speed. It is well suitable for use in the production of carpets, adhesives and other products requiring low-temperature me...もっと表示する Hanwha KCH-12 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with a fast gelling speed. It is well suitable for use in the production of carpets, adhesives and other products requiring low-temperature melting points. 表示を減らす | |
| Hanwha KCH-15 | Hanwha Chemical Corporation | Hanwha KCH-15 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with low density and a small change when stood up. It is well suitable for use in the production of carpets, chipping paints and other product...もっと表示する Hanwha KCH-15 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with low density and a small change when stood up. It is well suitable for use in the production of carpets, chipping paints and other products requiring satisfactory adhesion to metal surfaces and corrosion resistance. 表示を減らす | |
| Hanwha KCM-12 | Hanwha Chemical Corporation | Hanwha KCM-12 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with a fast gelling speed. It is well suitable for use in the production of carpets, adhesives and other products requiring low-temperature me...もっと表示する Hanwha KCM-12 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with a fast gelling speed. It is well suitable for use in the production of carpets, adhesives and other products requiring low-temperature melting points. 表示を減らす | |
| Hanwha KH-10 | Hanwha Chemical Corporation | Hanwha KH-10 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and absorption rate. It is well suitable for use in the production of flooring materials, wall paper, erasers, and other products requiring additi...もっと表示する Hanwha KH-10 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and absorption rate. It is well suitable for use in the production of flooring materials, wall paper, erasers, and other products requiring additional transparency and thermal stability. 表示を減らす | |
| Hanwha KH-31G | Hanwha Chemical Corporation | Hanwha KH-31G is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tarpaulins, and other products requiring low-temperatu...もっと表示する Hanwha KH-31G is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tarpaulins, and other products requiring low-temperature foaming. 表示を減らす | |
| Hanwha KH-31S | Hanwha Chemical Corporation | Hanwha KH-31S is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and excellent thermal stability. It is well suitable for use in the production of flooring materials, wall paper, casting leathers, and other pro...もっと表示する Hanwha KH-31S is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and excellent thermal stability. It is well suitable for use in the production of flooring materials, wall paper, casting leathers, and other products requiring low-temperature foaming products. 表示を減らす | |
| Hanwha KH-60 | Hanwha Chemical Corporation | Hanwha KH-60 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with high transparency and low density. It is well suitable for use in the production of flooring materials, wall paper, tarpulin, and other products requiring low...もっと表示する Hanwha KH-60 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with high transparency and low density. It is well suitable for use in the production of flooring materials, wall paper, tarpulin, and other products requiring low-temperature foaming products. 表示を減らす | |
| Hanwha KL-31 | Hanwha Chemical Corporation | Hanwha KL-31 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, leathers, and other products requiring low-temperature ...もっと表示する Hanwha KL-31 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, leathers, and other products requiring low-temperature melting foams. 表示を減らす | |
| Hanwha KL-701 | Hanwha Chemical Corporation | Hanwha KL-701 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tile carpets, and other products requiring low-temper...もっと表示する Hanwha KL-701 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tile carpets, and other products requiring low-temperature foaming products. 表示を減らす | |
| Hanwha KM-31 | Hanwha Chemical Corporation | Hanwha KM-31 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, casting leathers, and erasers. | |
| Hauthane HD-2113 | Hauthaway | Hauthane HD-2113 is a very hard, aliphatic, polyester-based, aqueous polyurethane dispersion specifically developed for factory coated PVC flooring. It is ideally suited for PVC roll or sheet goods requiring maximum stain and abrasion resistance without t...もっと表示する Hauthane HD-2113 is a very hard, aliphatic, polyester-based, aqueous polyurethane dispersion specifically developed for factory coated PVC flooring. It is ideally suited for PVC roll or sheet goods requiring maximum stain and abrasion resistance without the requirement for 180 degree reverse bend. HD-2113 may be used as supplied or blended with acrylic emulsions for application by spray, rotogravure, reverse roll, flexible blade, or wire wound rod. 表示を減らす | |
| Hauthane HD-2139 | Hauthaway | Hauthane HD-2139 is an aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring. It was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating du...もっと表示する Hauthane HD-2139 is an aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring. It was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating during PVC expansion. HD-2139 is ideally suited for PVC roll or sheet goods requiring a 180 degree reverse bend. HD-2139 can be used as a sole vehicle or blended with acrylic emulsions and applied by rotogravure, reverse roll, flexible blade, or wire wound rod. It may be thickened for alternative application methods. 表示を減らす | |
| Hauthane L-3385 | Hauthaway | Hauthane L-3385 is a self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use in high performance concrete and wood floor coatings. It employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-...もっと表示する Hauthane L-3385 is a self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use in high performance concrete and wood floor coatings. It employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-resistance and mar-resistance properties which equal or exceed those of two-component, water-based floor coating systems currently used in the market. L-3385 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 表示を減らす | |
| HOMAAP™ 8108 | Kito Chem | HOMAAP™ 8108 is a water-based polymer made of an acrylic-modifed polyurethane dispersion. It is a slightly blue and white semi-clear liquid designed for applications on a wide variety of substrates, including varnish on paper, non-woven fabrics, floor hea...もっと表示する HOMAAP™ 8108 is a water-based polymer made of an acrylic-modifed polyurethane dispersion. It is a slightly blue and white semi-clear liquid designed for applications on a wide variety of substrates, including varnish on paper, non-woven fabrics, floor heating and conductive carbon pastes. It may be thickened with water or associative thickeners to attain desired application viscosity. 表示を減らす | |
| HS23-60 | Tianyi Chemical Engineering Material Co., Ltd. | HS23-60, in the form of a clear, transparent, viscous liquid, is a hydroxy acrylic resin that can be used in polyurethane surface coatings, floor coatings, automotive coatings, and top coats. This product has high gloss, is flexible, and shows weather-re...もっと表示する HS23-60, in the form of a clear, transparent, viscous liquid, is a hydroxy acrylic resin that can be used in polyurethane surface coatings, floor coatings, automotive coatings, and top coats. This product has high gloss, is flexible, and shows weather-resistant characteristics. The end product will dry easily with a light-colored finish. 表示を減らす | |
| L-2813 | Chan Sieh Enterprises Co, Ltd. | L-2813 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, solvent free, and compatible with acrylic emulsions. It can be used in peelable metal coatings, printing inks, fiberglass, floor coatings, and paper and te...もっと表示する L-2813 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, solvent free, and compatible with acrylic emulsions. It can be used in peelable metal coatings, printing inks, fiberglass, floor coatings, and paper and textile coatings. 表示を減らす | |
| L-2842 | Chan Sieh Enterprises Co, Ltd. | L-2842 is an aliphatic polyether polyol with a solid content ratio of 34%. This product provides good adhesion on flexible substrates and good solvent resistance. It can be used in printing inks, paper and textile coatings, and floor coatings. | |
| L-2857 | Chan Sieh Enterprises Co, Ltd. | L-2857 is an aliphatic polyether polyol with a solid content ratio of 34%. This product is tough and flexible, provides good chemical and abrasion resistance, and adheres well. It can be used to coat parquet and cork floors, concrete, wall paint, metal ...もっと表示する L-2857 is an aliphatic polyether polyol with a solid content ratio of 34%. This product is tough and flexible, provides good chemical and abrasion resistance, and adheres well. It can be used to coat parquet and cork floors, concrete, wall paint, metal and plastic. It can also be used as an anti-gravity coating. 表示を減らす | |
| L-2869 | Chan Sieh Enterprises Co, Ltd. | L-2869 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, free of solvents, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, printing ink and glass fiber, and floor, paper and t...もっと表示する L-2869 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, free of solvents, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, printing ink and glass fiber, and floor, paper and textile coatings. 表示を減らす | |
| L-2883 | Chan Sieh Enterprises Co, Ltd. | L-2883 is an aliphatic polyether polyol with a solid content ratio of 30%. This product is hard and flexible, provides good abrasion and chemical resistance, with good adhesion. It can be used to coat paper, plastic, concrete, metal, wood, parquet and l...もっと表示する L-2883 is an aliphatic polyether polyol with a solid content ratio of 30%. This product is hard and flexible, provides good abrasion and chemical resistance, with good adhesion. It can be used to coat paper, plastic, concrete, metal, wood, parquet and lacquer. 表示を減らす | |
| L-2887 | Chan Sieh Enterprises Co, Ltd. | L-2887 is an aliphatic polyether polyol with a solid content ratio of 40%. This product is soft and flexible, and provides UV and abrasion resistance. It can be used as a lacquer for cork floors, and for wood and parquet. | |
| L-2911 | Chan Sieh Enterprises Co, Ltd. | L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, an...もっと表示する L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, and parquet. 表示を減らす | |
| L-2916 | Chan Sieh Enterprises Co, Ltd. | L-2916 is an aliphatic polyester polyol with a solid content ratio of 39.5%. This product provides chemical, humidity, abrasion, and BHMR resistance. It adheres well to many substrates in a broad range of application. It can be used in metal finishing ...もっと表示する L-2916 is an aliphatic polyester polyol with a solid content ratio of 39.5%. This product provides chemical, humidity, abrasion, and BHMR resistance. It adheres well to many substrates in a broad range of application. It can be used in metal finishing repair coatings, floor polishes and wood primers, and coatings for paper, plastic, wood and parquet. 表示を減らす | |
| L-2917 | Chan Sieh Enterprises Co, Ltd. | L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be use...もっと表示する L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be used in printing inks, and to coat plastic, leather, concrete, metal, wood, and paper. 表示を減らす | |
| L-2918 | Chan Sieh Enterprises Co, Ltd. | L-2918 is an aliphatic polyester polyol with a solid content ratio of 40%. This product provides chemical, humidity and abrasion resistance, and good adhesion to many substrates. It can be used as a laminating adhesive, and to coat wood, parquet, metal ...もっと表示する L-2918 is an aliphatic polyester polyol with a solid content ratio of 40%. This product provides chemical, humidity and abrasion resistance, and good adhesion to many substrates. It can be used as a laminating adhesive, and to coat wood, parquet, metal and plastic. 表示を減らす | |
| L-2919 | Chan Sieh Enterprises Co, Ltd. | L-2919 is an aliphatic polyester polyol with a solid content ratio of 39%. This product provides chemical, humidity, abrasion, and BHMR resistance. It adheres well to many substrates with a broad range of application. L-2919 can be used in metal finish...もっと表示する L-2919 is an aliphatic polyester polyol with a solid content ratio of 39%. This product provides chemical, humidity, abrasion, and BHMR resistance. It adheres well to many substrates with a broad range of application. L-2919 can be used in metal finishing repair coatings, floor polish, wood primer, and to coat paper, plastic, wood, and parquet. 表示を減らす | |
| L-2946 | Chan Sieh Enterprises Co, Ltd. | L-2946 is an aliphatic polyester polyol with a solid content ratio of 32%. This product provides solvent and blocking resistance, and is hard and flexible with good adhesion on flexible substrates. It can be used in printing ink, and to coat glass, conc...もっと表示する L-2946 is an aliphatic polyester polyol with a solid content ratio of 32%. This product provides solvent and blocking resistance, and is hard and flexible with good adhesion on flexible substrates. It can be used in printing ink, and to coat glass, concrete, wood, and parquet. 表示を減らす | |
| L-2976 | Chan Sieh Enterprises Co, Ltd. | L-2976 is an aliphatic polyester polyol with a solid content ratio of 33.8%. This product dries hard and fast, and offers chemical and abrasion resistance. It can be used in screen inks, and to coat metal, plastic, wood and parquet. | |
| L-2982 | Chan Sieh Enterprises Co, Ltd. | L-2982 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible, and provides humidity and abrasion resistance. It can be used in printing inks, and to coat metal, concrete, plastic, wood and parquet. | |
| L-2991 | Chan Sieh Enterprises Co, Ltd. | L-2991 is an aliphatic polyester polyol with a solid content ratio of 39%. This product is tough and flexible, adheres well to plastic, and is compatible with acrylic emulsions. It offers chemical and abrasion resistance. L-2991 can be used in printing...もっと表示する L-2991 is an aliphatic polyester polyol with a solid content ratio of 39%. This product is tough and flexible, adheres well to plastic, and is compatible with acrylic emulsions. It offers chemical and abrasion resistance. L-2991 can be used in printing inks, and to coat plastic, leather, concrete, wood and parquet. 表示を減らす | |
| L-2999 | Chan Sieh Enterprises Co, Ltd. | L-2999 is an aliphatic polyester polyol with a solid content ratio of 40%. This product is tough, medium hard and clear, and provides humidity and chemical resistance. It can be used to coat wood, parquet, and cork lacquer. | |
| L-3021 | Chan Sieh Enterprises Co, Ltd. | L-3021 is an aliphatic polycarbonate polyol with a solid content ratio of 39.5%. This product is very hard and tough, and provides water, stain, abrasion and chemical resistance. It can be used as the top coats for PVC and non-PVC flooring, and plastic ...もっと表示する L-3021 is an aliphatic polycarbonate polyol with a solid content ratio of 39.5%. This product is very hard and tough, and provides water, stain, abrasion and chemical resistance. It can be used as the top coats for PVC and non-PVC flooring, and plastic and wood coating, if combined with an acrylic emulsion. 表示を減らす | |
| L-3042 | Chan Sieh Enterprises Co, Ltd. | L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coati...もっと表示する L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coatings for metal and plastic surfaces, lacquers and coatings for wood and parquet floors, overprint varnishes, furniture coatings, and textured coatings. 表示を減らす | |
| L-3050 | Chan Sieh Enterprises Co, Ltd. | L-3050 is an aliphatic polycarbonate polyol with a solid content ratio of 34.7%. This product is very hard, tough and flexible. It has good chemical, solvent, water, humidity, and UV resistance. L-3050 adheres well to plastics. This product can be use...もっと表示する L-3050 is an aliphatic polycarbonate polyol with a solid content ratio of 34.7%. This product is very hard, tough and flexible. It has good chemical, solvent, water, humidity, and UV resistance. L-3050 adheres well to plastics. This product can be used as the top-coat for PVC and non-PVC flooring, and to coat metal, wood and parquet. 表示を減らす | |
| L-3410 | Chan Sieh Enterprises Co, Ltd. | L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wo...もっと表示する L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wood, parquet, overprint varnishes, and inks. 表示を減らす |
