| ADDITOL® VXW 4926 | Allnex | ADDITOL® VXW 4926 is an antifoaming additive for water dilutable paints, without silicone addition. It has rapid defoaming or air release, and allows high film thickness of stoving paints, without cissing. It is also suited for combinations of dispersions...もっと表示する ADDITOL® VXW 4926 is an antifoaming additive for water dilutable paints, without silicone addition. It has rapid defoaming or air release, and allows high film thickness of stoving paints, without cissing. It is also suited for combinations of dispersions with water dilutable synthetic resins. 表示を減らす | Request Sample |
| ADDITOL® VXW 5907 | Allnex | ADDITOL® VXW 5907 is a surface active additive for water dilutable paints, particularly for spray application. In stoving paints, the flash-off time prior to stoving, can be greatly reduced, without causing defects in the cured film. The effectivity varie...もっと表示する ADDITOL® VXW 5907 is a surface active additive for water dilutable paints, particularly for spray application. In stoving paints, the flash-off time prior to stoving, can be greatly reduced, without causing defects in the cured film. The effectivity varies with the type of the water dilutable paint. 表示を減らす | Request Sample |
| ADDITOL® VXW 6386 | Allnex | ADDITOL® VXW 6386 is a defoamer based on special hydrocarbons, without addition of silicone. It is qualified for following waterborne systems: stoving enamel based on alkyd or acrylic - melamine resin, 2 component acrylic - isocyanate paints, paints based...もっと表示する ADDITOL® VXW 6386 is a defoamer based on special hydrocarbons, without addition of silicone. It is qualified for following waterborne systems: stoving enamel based on alkyd or acrylic - melamine resin, 2 component acrylic - isocyanate paints, paints based on waterdilutable alkyd-resin, gloss- and semigloss dispersion paint. 表示を減らす | Request Sample |
| ADDITOL® VXW 6393 | Allnex | ADDITOL® VXW 6393 is a defoamer based on mineral spirits to prevent foam, without silicone addition. It was designed to destroy foam generated in emulsion wall-paints, based on PVAC, PVC, acrylics and their mixed polymers. | Request Sample |
| ADDITOL® XL 6507 | Allnex | ADDITOL® XL 6507 is a deairator/defoamer for solvent born paint systems. | Request Sample |
| ADDITOL® XW 393 | Allnex | ADDITOL® XW 393 is a antifoam for waterborne paint systems, without silicone addition. | Request Sample |
| AFCONA - 2020 | AFCONA Additives Sdn Bhd | AFCONA – 2020 is a silicone-free modified polyvinyl polymer in a SBP spirit solvent. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, and finds application in solvent-based coatings, printing inks, and th...もっと表示する AFCONA – 2020 is a silicone-free modified polyvinyl polymer in a SBP spirit solvent. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, and finds application in solvent-based coatings, printing inks, and thermosetting resin systems. 表示を減らす | |
| AFCONA - 2720 | AFCONA Additives Sdn Bhd | AFCONA – 2720 is a silicone-free polymer in an alkylbenzene and SBP spirit solvent. This slightly yellow liquid functions as an anti-foam and de-aeration additive for use in unsaturated polyesters, coil and can coatings, two-pack epoxies, polyester/melami...もっと表示する AFCONA – 2720 is a silicone-free polymer in an alkylbenzene and SBP spirit solvent. This slightly yellow liquid functions as an anti-foam and de-aeration additive for use in unsaturated polyesters, coil and can coatings, two-pack epoxies, polyester/melamine stoving systems, PVC compounds, and printing inks. 表示を減らす | |
| BC Antifoam 2226 | Basildon Chemical Company Ltd. | BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100,...もっと表示する BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100, and a specific gravity of 1.0. 表示を減らす | |
| BYK®-016 FOR INKS | BYK 毕克 | Silicone-free polymeric defoamers for aqueous printing inks and overprint varnishes. Compound of foam-destroying polymers and hydrophobic particles. | |
| BYK®-044 FOR INKS | BYK 毕克 | Silicone defoamers for aqueous printing inks and overprint varnishes. Emulsion of hydrophobic particles and polysiloxanes. | |
| BYK®-057 FOR INKS | BYK 毕克 | It is a silicone-free defoamer for solvent-borne, solvent-free printing inks, and overprint varnishes. It is especially recommended as defoamer for solvent free UV curing printing inks. | |
| BYK-1642 | BYK 毕克 | BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage. | |
| BYK-1758 | BYK 毕克 | BYK-1758 is a silicone-and aromatic-free defoamer based on polyacrylate for solvent-borne printing inks, in particular flexographic and gravure printing inks. | |
| BYK®-A 501 FOR UP RESINS | BYK 毕克 | It is a silicone-free air release additive for unsaturated polyester, epoxy and PUR resins. Recommended applications include epoxy resins and PUR-systems. | |
| DAPRO® DF 1760 | Elementis 海名斯特殊化学 | DAPRO® DF 1760 foam suppressor is a highly effective, silicone free, long lasting aqueous bubble breaker. It remains effective after extended storage of the system in which it is used. | |
| Dynoadd® F-102 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulati...もっと表示する Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulations. Addition of Dynoadd® F-102 will have a positive contribution to substrate wetting. Dynoadd® F-102 can be used in combination with other Dynoadd® products such as Dynoadd® F-1. Dynoadd® F-102 has applications in coil coatings and general industrial. The additive has limited compatibility in many lacquer systems, thus contributing to good defoaming as well as leveling. It may be used in all layers in multi-layered systems. 表示を減らす | |
| Dynoadd® F-200 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes....もっと表示する Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Dynoadd® F-200 improves air release and reduces foam formation. 表示を減らす | |
| Dynoadd® F-201ND | Dynoadd by Dynea 太尔化工 | Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flo...もっと表示する Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. 表示を減らす | |
| Dynoadd® F-705 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and p...もっと表示する Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and pinholes. It can be used as a foam control and de-aerating additive in solvent-borne food contact coatings at levels up to 0.1%. Dynoadd® F-705 is recommended for use as defoamer and de-airator in thick film coatings (2K epoxy, UP, PUR). Dynoadd® F-705 has applications in packaging coatings, direct food contact, UV coatings, general industry, and floor coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. 表示を減らす | |
| Dynoadd® F-706 | Dynoadd by Dynea 太尔化工 | Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the ...もっと表示する Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the coating. Dynoadd® F-706 has applications in UV coatings. The additive is compatible with most solvent-borne and non-solvent RadCure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. 表示を減らす | |
| Dynoadd® F-707 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. S...もっと表示する Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. Small additions may also contribute to improved flow and a reduction in surface imperfections like craters and orange peel. Dynoadd® F-707 has a good compatibility with many wax dispersions, giving good performance also in highly waxed coatings. Dynoadd® F-707 can also be used in combination with Dynoadd® flow additives. Dynoadd® F-707 has applications in coil coatings, PVdF, general industry, and packaging coatings. The additive is compatible with most solvent-borne and non-solvent radcure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. 表示を減らす | |
| Dynoadd® F-713 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-713 eliminates air entrapment, pinholes and surface foam in 100% or low VOC formulations. It prevents foaming during manufacture and application. Dynoadd® F-713 is particularly suited for thick films like floor coatings, castings and moulding b...もっと表示する Dynoadd® F-713 eliminates air entrapment, pinholes and surface foam in 100% or low VOC formulations. It prevents foaming during manufacture and application. Dynoadd® F-713 is particularly suited for thick films like floor coatings, castings and moulding based on 2K epoxies, unsaturated PE and PUs. Dynoadd® F-713 may reduce film transparency. Dynoadd® F-713 has applications in 2K Epoxy, Unsat. PE, and 1 and 2K PU formulations. 表示を減らす | |
| Dynoadd® F-760 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in c...もっと表示する Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in coating surfaces that are easily recoated. Dynoadd® F-760 is based on a solution of foam destabilizing polymers and is silicone- and mineral oil-free. 表示を減らす | |
| HX-5030 | Zhuhai Huaxia Paint Co., Ltd. | HX-5030, in the form of a cloudy yellow liquid, is a mineral oil with a hydrophobic compound as its vehicle. This product is a non-silicone anti-foamer for water-based systems that can be used in water-based coatings, inks, and binders. It is dispersibl...もっと表示する HX-5030, in the form of a cloudy yellow liquid, is a mineral oil with a hydrophobic compound as its vehicle. This product is a non-silicone anti-foamer for water-based systems that can be used in water-based coatings, inks, and binders. It is dispersible in water, applicable to a wide range of pH values, and is compatible with film. 表示を減らす | |
| KEPERPOL®-712 | Kito Chem | KEPERPOL®-712 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the de...もっと表示する KEPERPOL®-712 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 表示を減らす | |
| KEPERPOL®-713 | Kito Chem | KEPERPOL®-713 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the de...もっと表示する KEPERPOL®-713 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 表示を減らす | |
| KEPERPOL®-717 | Kito Chem | KEPERPOL®-718 is a non-silicon defoaming agent made of a polyolefin solution. it is a yellowish transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeratio...もっと表示する KEPERPOL®-718 is a non-silicon defoaming agent made of a polyolefin solution. it is a yellowish transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy and so on, but dose not effect on the transparency. This additive is well suited for use in the production of medium and low polarity solvent type coating and printing inks. 表示を減らす | |
| KEPERPOL®-718 | Kito Chem | KEPERPOL®-718 is a non-silicon defoaming agent made of a polyolefin solution. it is a yellowish transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeratio...もっと表示する KEPERPOL®-718 is a non-silicon defoaming agent made of a polyolefin solution. it is a yellowish transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy and so on, but dose not effect on the transparency. This additive is well suited for use in the production of medium and low polarity solvent type coating and printing inks. 表示を減らす | |
| KEPERPOL®-720 | Kito Chem | KEPERPOL®-720 is a non-silicon defoaming agent made of a Vinyl ether polymer solution. it is a colorless, transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming...もっと表示する KEPERPOL®-720 is a non-silicon defoaming agent made of a Vinyl ether polymer solution. it is a colorless, transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy and so on, but dose not effect on the transparency. This additive is well suited for use in the production of medium and low polarity solvent type coating and printing inks. 表示を減らす | |
| KEPERPOL®-730 | Kito Chem | KEPERPOL®-730 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the de...もっと表示する KEPERPOL®-730 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 表示を減らす | |
| KEPERPOL®-730B | Kito Chem | KEPERPOL®-730B is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the d...もっと表示する KEPERPOL®-730B is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 表示を減らす | |
| KEPERPOL®-7315 | Kito Chem | KEPERPOL®-7315 is a non-silicon defoaming agent made of a mixture of polycrylate and polyethylene ether. It is a yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps ...もっと表示する KEPERPOL®-7315 is a non-silicon defoaming agent made of a mixture of polycrylate and polyethylene ether. It is a yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 表示を減らす | |
| KEPERPOL®-732 | Kito Chem | KEPERPOL®-732 is a non-silicon defoaming agent made of a mixture of an acrylic copolymer solution. It is a yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the de...もっと表示する KEPERPOL®-732 is a non-silicon defoaming agent made of a mixture of an acrylic copolymer solution. It is a yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 表示を減らす | |
| KEPERPOL®-733 | Kito Chem | KEPERPOL®-733 is a non-silicon defoaming agent made of a mixture of polycrylate and polyethylene ether. It is a yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps t...もっと表示する KEPERPOL®-733 is a non-silicon defoaming agent made of a mixture of polycrylate and polyethylene ether. It is a yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 表示を減らす | |
| KEPERPOL®-Re-711 | Kito Chem | KEPERPOL®-Re-711 is a non-silicon defoaming agent made of a Vinyl ether polymer solution. it is a colorless, transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoam...もっと表示する KEPERPOL®-Re-711 is a non-silicon defoaming agent made of a Vinyl ether polymer solution. it is a colorless, transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy and so on, but dose not effect on the transparency. This additive is well suited for use in the production of medium and low polarity solvent type coating and printing inks. 表示を減らす | |
| SURFYNOL® 104 | Evonik Operations GmbH, BL Coating Additives | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 100% active solid. | Request Sample |
| SURFYNOL® 104 A | Evonik Operations GmbH, BL Coating Additives | SURFYNOL® 104 A is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| SURFYNOL® 104 BC | Evonik Operations GmbH, BL Coating Additives | SURFYNOL® 104 BC is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® 104 DPM | Evonik Operations GmbH, BL Coating Additives | Surfynol® 104 DPM is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® 104 E | Evonik Operations GmbH, BL Coating Additives | Surfynol® 104 E is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® 104 H | Evonik Operations GmbH, BL Coating Additives | Surfynol® 104 H is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® 104 PA | Evonik Operations GmbH, BL Coating Additives | Surfynol® 104 PA is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® 104 PG 50 | Evonik Operations GmbH, BL Coating Additives | Surfynol® 104 PG 50 is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® AD-01 | Evonik Operations GmbH, BL Coating Additives | Surfynol® AD 01 is multi-functional gemini surfactant combining dynamic wetting and molecular defoaming. Surfynol® AD 01 also acts as a coalescing aid. | Request Sample |
| Surfynol® DF-110 D | Evonik Operations GmbH, BL Coating Additives | Surfynol® DF 110 D is a very compatible molecular defoamer basedon Gemini surfactant technology. Free of silicone and silica. Offers additional dynamic wetting properties. | Request Sample |
| Surfynol® DF-110BC Defoamer | Evonik Operations GmbH, BL Coating Additives | Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surfa...もっと表示する Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surface defects. 表示を減らす | Request Sample |
| Surfynol® MD 20 | Evonik Operations GmbH, BL Coating Additives | Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating ...もっと表示する Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating microfoam and other foam related defects in waterborne systems when used as a foam control agent. It is 100% active, solvent-free, clear liquid. It is free of silicone and hydrophobic silica. It is temperature and pH stable (pH 1-13). Applications include, coatings, graphic arts, adhesives, dye and pigment synthesis, pigment grinding, oil and gas processing, cleaning products, metalworking fluids, cements, mortars and grouts and personal care. 表示を減らす | Request Sample |
| TEGO® Airex 921 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 921 is a liquid, silicone-free, organic polymer for universal use in clear, pigmented, and especially for radiation-curing formulations. It is also highly suitable for compressed air spraying and flexo/gravure printing. The addition of this pr...もっと表示する TEGO® Airex 921 is a liquid, silicone-free, organic polymer for universal use in clear, pigmented, and especially for radiation-curing formulations. It is also highly suitable for compressed air spraying and flexo/gravure printing. The addition of this product, may be either in the grind or during the let-down procedure. It may be used at temperatures above 15°C. 表示を減らす | Request Sample |
| TEGO® Foamex 6 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 6 is an efficient concentrate defoamer for water-based paints with good long-term stability. TEGO® Foamex 6 is silicone- and silica-free. | Request Sample |
| TEGO® Foamex 832 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 832 it is silicone-free and mineral oil-free defoamer concentrate, effective and compatible, ideally suitable for the let-down stage. It is a hazy liquid formulation based on hydrophobic organic active matters and dispersed solid particles. T...もっと表示する TEGO® Foamex 832 it is silicone-free and mineral oil-free defoamer concentrate, effective and compatible, ideally suitable for the let-down stage. It is a hazy liquid formulation based on hydrophobic organic active matters and dispersed solid particles. TEGO® Foamex 832 is based on sustainable raw materials, for use in the millbase of pigmented printing inks, and is suitable for contact with foodstuffs. Addition of this product may be either in the grind or during the let-down procedure. The long-term effectiveness of the defoamer is dependent on the formulation and should be tested in the individual formulation. 表示を減らす | Request Sample |
| TEGO® Foamex 9 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 9 is an effective defoamer concentrate based on mineral oil technology. Silicone-free. Contains fumed silica. | Request Sample |
