| Anatase BA-115 | Beijing Panxin Titanium Co., Ltd. | Anatase BA-115 is an anatase titanium dioxide that is a white powder with good whiteness and covering power. This product has a specific gravity of 3.8g/cm3 and is commonly used in non-outdoor wall paint and oil ink. | |
| Anatase BA-130 | Beijing Panxin Titanium Co., Ltd. | Anatase BA-130 is an anatase titanium dioxide that is a white innocuity and odorless powder. This product has a pH of 6.5-8.0, high reducing powder, low oil absorption, and excellent pigment characters. It is commonly used in paints and printing applicati...もっと表示する Anatase BA-130 is an anatase titanium dioxide that is a white innocuity and odorless powder. This product has a pH of 6.5-8.0, high reducing powder, low oil absorption, and excellent pigment characters. It is commonly used in paints and printing applications. 表示を減らす | |
| Anatase SA-101 | Beijing Panxin Titanium Co., Ltd. | Anatase SA-101 is an anatase titanium dioxide pigment. This product has high glossiness, particle size, good fluidity, strong discovering power and dispersion. It is commonly used for coatings and inks. | |
| Anatase SA-103 | Beijing Panxin Titanium Co., Ltd. | Anatase SA-103 is an anatase titanium dioxide that is produced during the vulcanization process. This product has good stability, high purity, good whiteness, strong reducing and covering power, and good optical properties. It is commonly used in general ...もっと表示する Anatase SA-103 is an anatase titanium dioxide that is produced during the vulcanization process. This product has good stability, high purity, good whiteness, strong reducing and covering power, and good optical properties. It is commonly used in general paints. 表示を減らす | |
| CF19-2186 | NuSil Silicone Technology 1 | CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust an...もっと表示する CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust and other contaminants. It can also be utilized as an encapsulating or potting material, and can replicate surfaces and devices. 表示を減らす | |
| LS-6140 | NuSil Silicone Technology 1 | LS-6140 is a two-part, optically clear silicone system that is based on a methyl silicone polymer, and has a low viscosity. It can be used for casting, injecting or bonding molidng of high performance optical components. It can also be used for photonics ...もっと表示する LS-6140 is a two-part, optically clear silicone system that is based on a methyl silicone polymer, and has a low viscosity. It can be used for casting, injecting or bonding molidng of high performance optical components. It can also be used for photonics applications that require a low outgassing and minimal volatile condensables to protect sensitive devices from condensation. 表示を減らす | |
| LS-6941 | NuSil Silicone Technology 1 | LS-6941 is an optical thermoset that is solvent free, and has a low viscosity. It will cure at room temperature or more rapidly when heat is added. It can be used for the bonding, casting or injecting molding of high performance optical components. This s...もっと表示する LS-6941 is an optical thermoset that is solvent free, and has a low viscosity. It will cure at room temperature or more rapidly when heat is added. It can be used for the bonding, casting or injecting molding of high performance optical components. This silicone is also ideal for applications that require index matching at 1.41. It is suitable for applications that require an operating temperature range of -65 to 240°C (–85 to 465°F). 表示を減らす | |
| R-1008-0 | NuSil Silicone Technology 1 | R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating mus...もっと表示する R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 表示を減らす | |
| R-1008-1 | NuSil Silicone Technology 1 | R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...もっと表示する R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. 表示を減らす | |
| R-1008-2 | NuSil Silicone Technology 1 | R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...もっと表示する R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used on silicone rubber parts as a marking ink where the coating must maintain long term stability. 表示を減らす | |
| R-1008-3 | NuSil Silicone Technology 1 | R-1008-3 is a red, non corrosive, flowable silicone elastomer dispersion that cures in 7 days at room temperature. This product is long lasting, and is used as a marking ink for silicone rubber parts as well as other components that require a coating with...もっと表示する R-1008-3 is a red, non corrosive, flowable silicone elastomer dispersion that cures in 7 days at room temperature. This product is long lasting, and is used as a marking ink for silicone rubber parts as well as other components that require a coating with long term stability. 表示を減らす | |
| R-1008-4 | NuSil Silicone Technology 1 | R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must ma...もっと表示する R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 表示を減らす | |
| R-1008-5 | NuSil Silicone Technology 1 | R-1008-5 is a yellow, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must mai...もっと表示する R-1008-5 is a yellow, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 表示を減らす | |
| R-1008-6 | NuSil Silicone Technology 1 | R-1008-6 is a green, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must main...もっと表示する R-1008-6 is a green, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 表示を減らす | |
| R-1008-7 | NuSil Silicone Technology 1 | R-1008-7 is a blue, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maint...もっと表示する R-1008-7 is a blue, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 表示を減らす | |
| R-1008-8 | NuSil Silicone Technology 1 | R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must mai...もっと表示する R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 表示を減らす | |
| R-2100-1 | NuSil Silicone Technology 1 | R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...もっと表示する R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 表示を減らす | |
| R-2100-2 | NuSil Silicone Technology 1 | R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...もっと表示する R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 表示を減らす | |
| R-2100-3 | NuSil Silicone Technology 1 | R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal ...もっと表示する R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 表示を減らす | |
| R-2100-6 | NuSil Silicone Technology 1 | R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...もっと表示する R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 表示を減らす | |
| Rutile Titanium Dioxide CR-501 | Beijing Panxin Titanium Co., Ltd. | Rutile Titanium Dioxide CR-501 is a rutile titanium dioxide pigment that is produced by the chlorination process. This product has good dispersion, strong coloring power, good whiteness, and strong covering power. It is commonly used in paints and oil ink...もっと表示する Rutile Titanium Dioxide CR-501 is a rutile titanium dioxide pigment that is produced by the chlorination process. This product has good dispersion, strong coloring power, good whiteness, and strong covering power. It is commonly used in paints and oil inks. 表示を減らす | |
| Rutile Titanium Dioxide CR-510 | Beijing Panxin Titanium Co., Ltd. | Rutile Titanium Dioxide CR-510 is a rutile titanium dioxide pigment that is produced by the chlorination process. This product has high glossiness, good dispersion, strong covering power, excellent coloring power, and great weather ability. It is commonly...もっと表示する Rutile Titanium Dioxide CR-510 is a rutile titanium dioxide pigment that is produced by the chlorination process. This product has high glossiness, good dispersion, strong covering power, excellent coloring power, and great weather ability. It is commonly used in industrial paints and oil inks. 表示を減らす | |
| Rutile Titanium Dioxide SR-159 | Beijing Panxin Titanium Co., Ltd. | Rutile Titanium Dioxide SR-159 is a rutile titanium dioxide that is produced by the sulfuric acid process. This product has high bluing, dispersion, weather resistance, strong covering power, and low oil absorption. It is commonly used in color paste, oil...もっと表示する Rutile Titanium Dioxide SR-159 is a rutile titanium dioxide that is produced by the sulfuric acid process. This product has high bluing, dispersion, weather resistance, strong covering power, and low oil absorption. It is commonly used in color paste, oily paintings and coatings, and oil inks. 表示を減らす | |
| Rutile Titanium Dioxide SR-169 | Beijing Panxin Titanium Co., Ltd. | Rutile Titanium Dioxide SR-169 is a rutile titanium dioxide pigment that is produced during the vulcanization process. This product is used for its dispersion, high weather ability, glossiness, low oil absorption, and water-resistance. It is commonly used...もっと表示する Rutile Titanium Dioxide SR-169 is a rutile titanium dioxide pigment that is produced during the vulcanization process. This product is used for its dispersion, high weather ability, glossiness, low oil absorption, and water-resistance. It is commonly used in paint and oil ink products. 表示を減らす | |
| Rutile Titanium Dioxide SR-189 | Beijing Panxin Titanium Co., Ltd. | Rutile Titanium Dioxide SR-189 is a rutile titanium dioxide pigment that is made during the vulcanization process. This product is used for its dispersion, high whiteness, high glossiness, strong covering power, and high weather ability. It is commonly us...もっと表示する Rutile Titanium Dioxide SR-189 is a rutile titanium dioxide pigment that is made during the vulcanization process. This product is used for its dispersion, high whiteness, high glossiness, strong covering power, and high weather ability. It is commonly used in paint and oil ink products. 表示を減らす | |
| Rutile Titanium Dioxide SR-199 | Beijing Panxin Titanium Co., Ltd. | Rutile Titanium Dioxide SR-199 is a rutile titanium dioxide pigment that is coated by ZrO2/A12O3. This product is used for its glossiness, good tinting strength, high weather resistance, and low oil absorption. It is commonly used in printing inks and pai...もっと表示する Rutile Titanium Dioxide SR-199 is a rutile titanium dioxide pigment that is coated by ZrO2/A12O3. This product is used for its glossiness, good tinting strength, high weather resistance, and low oil absorption. It is commonly used in printing inks and paints. 表示を減らす |
