| Epoxies® 50-3186 NC | Epoxies, Etc. | Epoxies® 50-3186 NC is a two part thermally conductive epoxy adhesive. This thixotropic adhesive provides high temperature bonds to a variety of substrates. 50-3186 NC is a perfect choice for applications requiring high thermal conductivity, low thermal e...もっと表示する Epoxies® 50-3186 NC is a two part thermally conductive epoxy adhesive. This thixotropic adhesive provides high temperature bonds to a variety of substrates. 50-3186 NC is a perfect choice for applications requiring high thermal conductivity, low thermal expansion, and high operating temperature performance. 表示を減らす | |
| ONEX MB 1000RE | Glonatech S.A. | ONEX MB 1000RE is a multi-wall carbon nanotube masterbatch that is designed to provide high dispersion, thermal stability, and thermal conductivity. This product is a liquid dispersion and tested with microscopic analysis techniques. Common applications o...もっと表示する ONEX MB 1000RE is a multi-wall carbon nanotube masterbatch that is designed to provide high dispersion, thermal stability, and thermal conductivity. This product is a liquid dispersion and tested with microscopic analysis techniques. Common applications of this product include adhesives, marine coatings, and resin-based parts. 表示を減らす | |
| CV-9042 | NuSil Silicone Technology 1 | CV-9042 is a thermally conductive, white silicone grease that can be applied to base and mounting studs of transistors and other electrical components as a heat-sink seal. This product has excellent resistance to moisture, ozone and oxidation over a wide ...もっと表示する CV-9042 is a thermally conductive, white silicone grease that can be applied to base and mounting studs of transistors and other electrical components as a heat-sink seal. This product has excellent resistance to moisture, ozone and oxidation over a wide temperature range. It can be used for its thermal conductivity because it has a high and low temperature stability with a low bleed. 表示を減らす | |
| R-2165 | NuSil Silicone Technology 1 | R-2165 is a thermally conductive, silicone, potting elastomer that is pourable, self-leveling, and cures at room temperature. This product has enhanced thermal conductivity for removal of heat and improved reliability. It can be used in multiple applicati...もっと表示する R-2165 is a thermally conductive, silicone, potting elastomer that is pourable, self-leveling, and cures at room temperature. This product has enhanced thermal conductivity for removal of heat and improved reliability. It can be used in multiple applications such as potting for sensors, relays, and other electronic components that require protection from vibration and other harsh environmental conditions. 表示を減らす | |
| CV-9341 | NuSil Silicone Technology 1 | CV-9341 is a white silicone grease that can provide high thermal conductivity, high and low temperature stability, and low bleed. It can be applied to the base and mounting studs of transistors and other electrical components as a heat-sink seal. It is al...もっと表示する CV-9341 is a white silicone grease that can provide high thermal conductivity, high and low temperature stability, and low bleed. It can be applied to the base and mounting studs of transistors and other electrical components as a heat-sink seal. It is also ideal for applications that require low outgassing under extreme operating conditions. 表示を減らす | |
| R-2949 | NuSil Silicone Technology 1 | R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive ...もっと表示する R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive to bond openings in housings and modules where grooves or other configurations require a limited flow material with moderate thermal conductivity. It can also provide the transfer of heat between electrical components and their heat sinks. 表示を減らす | |
| Epoxies® 70-3812 NC | Epoxies, Etc. | Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulate...もっと表示する Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulated with a unique combination of fillers, particle sizes and dispersion techniques. It is well suited for use with a variety of heat sink applications and its viscosity is particularly good for Fin bonding. 表示を減らす | |
| CV10-2568 | NuSil Silicone Technology 1 | CV10-2568 is a two part RTV ablative silicone that can be used as a bonding, sealing, or potting material in electronic and space applications. This product will provide radiation resistance, low thermal conductivity, oxidation stability and thermal stabi...もっと表示する CV10-2568 is a two part RTV ablative silicone that can be used as a bonding, sealing, or potting material in electronic and space applications. This product will provide radiation resistance, low thermal conductivity, oxidation stability and thermal stability. It can also be especially useful to bond solar cells to solar array panels as it has a broad operating temperature range. 表示を減らす | |
| Ongronat® 2100 | BorsodChem Rt. | Ongronat® 2100 is a polyphenyl-polymethylene-polyisocyanate resin. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as an adhesive, coating and sealant in construction applications. This product has low thermal...もっと表示する Ongronat® 2100 is a polyphenyl-polymethylene-polyisocyanate resin. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as an adhesive, coating and sealant in construction applications. This product has low thermal conductivity, excellent insulation properties, and is both weather- and water-resistant. 表示を減らす | |
| Petroleum Resin-C9 | Qingdao Eastsun Chemical Corporation Limited | Petroleum Resin-C9 is an aromatic hydrocarbon resin, light yellow to darker brown granular or flake, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and he...もっと表示する Petroleum Resin-C9 is an aromatic hydrocarbon resin, light yellow to darker brown granular or flake, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. This product is ideally used in adhesives, coating production, rubber treatment, printing ink production, and the paper making industry. 表示を減らす | |
| EPM1-2493 | NuSil Silicone Technology 1 | EPM1-2493 is a white, thermally conductive silicone elastomer that has low viscosity and cures with the addition of heat. It can be used to adhere integrated circuit substrates, heat sinks, base plates or where grooves or other configurations that requir...もっと表示する EPM1-2493 is a white, thermally conductive silicone elastomer that has low viscosity and cures with the addition of heat. It can be used to adhere integrated circuit substrates, heat sinks, base plates or where grooves or other configurations that require a material with limited flow. This product is ideal for applications that require a low volatility, conformal, thermally conductive silicone that can transfer heat between electrical components and and their heat sinks. 表示を減らす | |
| SCV1-2599 | NuSil Silicone Technology 1 | SCV1-2599 is a two-part, white, thermally conductive silicone that cures with the addition of heat. It provides heat transfer between electrical/electronic components and their heat sinks. This product can be used to adhere integrated circuit substrates, ...もっと表示する SCV1-2599 is a two-part, white, thermally conductive silicone that cures with the addition of heat. It provides heat transfer between electrical/electronic components and their heat sinks. This product can be used to adhere integrated circuit substrates, base plates, heat sinks or where grooves require a non-flowable to limited flow material. 表示を減らす | |
| CV1-2960 | NuSil Silicone Technology 1 | CV1-2960 is a thermally conductive silicone that can be used to adhere base plates, integrated circuit substrates, and heat sinks or other configurations that require a flowable to limited flow material. This product is also suitable for applications that...もっと表示する CV1-2960 is a thermally conductive silicone that can be used to adhere base plates, integrated circuit substrates, and heat sinks or other configurations that require a flowable to limited flow material. This product is also suitable for applications that require low outgassing under extreme operating conditions. It is able to provide heat transfer between electronic components and their heat sinks. 表示を減らす | |
| SCV2-2599 | NuSil Silicone Technology 1 | SCV2-2599 is a thixotropic, thermally conductive silicone that is designed to allow bond line thicknesses of < or = 50 microns. This product cures with the addition of heat and provides heat transfer between electrical/electronic components and their heat...もっと表示する SCV2-2599 is a thixotropic, thermally conductive silicone that is designed to allow bond line thicknesses of < or = 50 microns. This product cures with the addition of heat and provides heat transfer between electrical/electronic components and their heat sinks. It can also be used as an adhesive for base plates, integrated circuit substrates, heat sinks or where grooves require a non-flow material. 表示を減らす | |
| R-2940 | NuSil Silicone Technology 1 | R-2940 is a thermally conductive silicone that has a high strength that can be cured rapidly with the addition of heat. It can be used to adhere base plates, integrated circuit substrates, heat sinks, and other configurations that require a material that ...もっと表示する R-2940 is a thermally conductive silicone that has a high strength that can be cured rapidly with the addition of heat. It can be used to adhere base plates, integrated circuit substrates, heat sinks, and other configurations that require a material that is non-flowable to a limited flow. It can also be used to provide heat transfer between electrical/electronic components and their heat sinks. 表示を減らす | |
| R-2930 | NuSil Silicone Technology 1 | R-2930 is a two-part, white, thermally conductive silicone that cures rapidly with the addition of heat. This product can be used as an adhesive for integrated circuit substrates, heat sinks, base plates or where grooves or other configurations require a ...もっと表示する R-2930 is a two-part, white, thermally conductive silicone that cures rapidly with the addition of heat. This product can be used as an adhesive for integrated circuit substrates, heat sinks, base plates or where grooves or other configurations require a non-flowable to limited flow material. It can also provide the transfer of heat between electrical/electronic components and their heat sinks. 表示を減らす | |
| R-1505 | NuSil Silicone Technology 1 | R-1505 is a non-corrosive, static dissipative RTV silicone that cures at room temperature to form a flexible, resilient, conductive bond or seal. It is best used for applications that require a non-corrosive adhesive/sealant. This product provides protect...もっと表示する R-1505 is a non-corrosive, static dissipative RTV silicone that cures at room temperature to form a flexible, resilient, conductive bond or seal. It is best used for applications that require a non-corrosive adhesive/sealant. This product provides protection from extremes in humidity, temperature, radiation, thermal stress and mechanical stress. It can also be utilized as a shielding for RFI and EMI in electronic applications. 表示を減らす | |
| CV-2961 | NuSil Silicone Technology 1 | CV-2961 is a thermally conductive silicone that is designed for enhanced performance in extreme low and high temperatures. This makes it able to transfer heat between electronic components and their heat sinks. This product can also be applied in applicat...もっと表示する CV-2961 is a thermally conductive silicone that is designed for enhanced performance in extreme low and high temperatures. This makes it able to transfer heat between electronic components and their heat sinks. This product can also be applied in applications where low outgassing is required to avoid condensation in sensitive devices. 表示を減らす | |
| EPM-2490 | NuSil Silicone Technology 1 | EPM-2490 is a two-part, white, thermally conductive, electrically insulating silicone system that is non-corrosive. It can be used in applications that require a a broad operating temperature range. It is ideal to be used when a form-in-place, thermal int...もっと表示する EPM-2490 is a two-part, white, thermally conductive, electrically insulating silicone system that is non-corrosive. It can be used in applications that require a a broad operating temperature range. It is ideal to be used when a form-in-place, thermal interface material (TIM) is needed for use as a sealing, caulking, adhesive or potting material in electronics applications that require little volatility to prevent contamination in sensitive devices. This TIM is designed to provide heat transfer between electrical/electronic components and their heat sinks for a variety of component level packaging. 表示を減らす | |
| CV-2963 | NuSil Silicone Technology 1 | CV-2963 is a white, two-part, thermally conductive silicone that is well suited for applications that require a broad temperature operating range. It can be used as an adhesive for base plates, circuit substrates, heat sinks or where grooves or other conf...もっと表示する CV-2963 is a white, two-part, thermally conductive silicone that is well suited for applications that require a broad temperature operating range. It can be used as an adhesive for base plates, circuit substrates, heat sinks or where grooves or other configurations require a non-flowable to limited flow material. This product can also transfer heat between heat sinks and electrical components. 表示を減らす | |
| R-2939 | NuSil Silicone Technology 1 | R-2939 is a two-part, white, pourable, thermally conductive silicone that has a low viscosity and cures rapidly with the addition of heat. It can provide the transfer of heat between electrical/electronic components and their heat sinks. This product is i...もっと表示する R-2939 is a two-part, white, pourable, thermally conductive silicone that has a low viscosity and cures rapidly with the addition of heat. It can provide the transfer of heat between electrical/electronic components and their heat sinks. This product is ideally used as an adhesive for openings in modules and housings where grooves or other configurations require a non-flowable to limited flow material. 表示を減らす | |
| CV-2948 | NuSil Silicone Technology 1 | CV-2948 is a white, thermally conductive RTV silicone that is designed for exceptional performance in extreme high and low temperatures. It can be used as an adhesive for integrated circuit substrates, base plates, heat sinks or where grooves or other con...もっと表示する CV-2948 is a white, thermally conductive RTV silicone that is designed for exceptional performance in extreme high and low temperatures. It can be used as an adhesive for integrated circuit substrates, base plates, heat sinks or where grooves or other configurations that require a non-flowable material. This product also able to provide heat transfer between electrical/electronic components and their heat sinks. 表示を減らす | |
| CV-1500 | NuSil Silicone Technology 1 | CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperatur...もっと表示する CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperature, humidity, radiation, thermal and mechanical stress. This adhesive is well suited for form-in-place conductive gaskets and attaching heating coils to solar collector plates. 表示を減らす | |
| CV-2960 | NuSil Silicone Technology 1 | CV-2960 is a flowable, white, thermally conductive silicone that is able to provide moderate heat transfer between electrical components and their heat sinks. This product can be used for adhereing openings in housing and modules where grooves or other co...もっと表示する CV-2960 is a flowable, white, thermally conductive silicone that is able to provide moderate heat transfer between electrical components and their heat sinks. This product can be used for adhereing openings in housing and modules where grooves or other configurations require a limited flow material. It can also protect sensitive devices from condensation in environments that have extreme operating conditions. 表示を減らす | |
| CV-2942 | NuSil Silicone Technology 1 | CV-2942 is a two-part, thermally conductive silicone that uses platinum-catalyzed addition cure. It can be used for applications that require low outgassing under extreme operating conditions to avoid condensation from building in sensitive devices. This ...もっと表示する CV-2942 is a two-part, thermally conductive silicone that uses platinum-catalyzed addition cure. It can be used for applications that require low outgassing under extreme operating conditions to avoid condensation from building in sensitive devices. This product is also able to provide moderate heat transfer between electrical/electronic components and their heat sinks. And, it can be used to adhere openings in modules or housings where a non-flowable material is needed. 表示を減らす | |
| EPM-2890 | NuSil Silicone Technology 1 | EPM-2890 is a one part, white, silicone adhesive that is thermally conductive and non corrosive. It has the ability to operate on a wide temperature range and provide moderate heat transfer between electrical components and their heat sinks. This product ...もっと表示する EPM-2890 is a one part, white, silicone adhesive that is thermally conductive and non corrosive. It has the ability to operate on a wide temperature range and provide moderate heat transfer between electrical components and their heat sinks. This product can also function as a caulking, sealing, potting or adhesive material in electronics applications that require minimal outgassing to prevent condensation from building in sensitive devices. 表示を減らす | |
| R-2655 | NuSil Silicone Technology 1 | R-2655 is a high strength, transparent RTV silicone elastomer that has a low viscosity and an accelerated cure rate when heat is added. This product can be used to provide environmental protection in potting, encapsulating and coating applications where radiation resistance, low temperature flexibility, oxidation and thermal...もっと表示する R-2655 is a high strength, transparent RTV silicone elastomer that has a low viscosity and an accelerated cure rate when heat is added. This product can be used to provide environmental protection in potting, encapsulating and coating applications where radiation resistance, low temperature flexibility, oxidation and thermal stability are needed. The low viscosity of this elastomer allows for easy flow around complex parts and it provides exceptional shock and electrical insulation resistance. 表示を減らす | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...もっと表示する CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). 表示を減らす | |
| R-2631 | NuSil Silicone Technology 1 | R-2631 is a two-part, black, static dissipative RTV silicone that has a base of methyl silicone polymer. It can provide protection from humidity, radiation, mechanical and thermal stress. This product can also act as an adhesive to bond covers on housings...もっと表示する R-2631 is a two-part, black, static dissipative RTV silicone that has a base of methyl silicone polymer. It can provide protection from humidity, radiation, mechanical and thermal stress. This product can also act as an adhesive to bond covers on housings or where grooves or other configurations require a flowable to limited flow material with a moderate extrusion rate. It is excellent for formed-in-place conductive gaskets and can provide shielding for RFI and EMI in industrial applications. 表示を減らす | |
| CV1-2964 | NuSil Silicone Technology 1 | CV1-2964 is a silicone elastomer the has controlled volatility and can be used to transfer heat between heat sinks and electrical/electronic components. It can also be utilized for applications requiring low outgassing under extreme operating conditions. ...もっと表示する CV1-2964 is a silicone elastomer the has controlled volatility and can be used to transfer heat between heat sinks and electrical/electronic components. It can also be utilized for applications requiring low outgassing under extreme operating conditions. This product may be used as an adhesive for integrated circuit substrates, base plates, heat sinks or where grooves require a limited flow material. 表示を減らす | |
| Epoxies® 50-3112 | Epoxies, Etc. | Epoxies® 50-3112 is a two part, fast curing thermally conductive epoxy adhesive. Dark grey in color when mixed, this product a simple 1:1 mix ratio and develops a 1,400 psi Lap Shear strength bond (aluminum to aluminum) in four hours at room temperature ...もっと表示する Epoxies® 50-3112 is a two part, fast curing thermally conductive epoxy adhesive. Dark grey in color when mixed, this product a simple 1:1 mix ratio and develops a 1,400 psi Lap Shear strength bond (aluminum to aluminum) in four hours at room temperature and 2,200 psi. just after 20 hours. 50-3112 offers fast heat dissipation for a wide range of electronic applications. The black resin and white hardener provide an excellent visual indication of a complete mix. 表示を減らす | |
| Epoxies® 40-3909 | Epoxies, Etc. | Epoxies® 40-3909 is a two part epoxy resin adhesive and coating compound, filled with a highly conductive, silver coated nickel. It is designed to provide low volume resistivity of less than 5x10-3 ohm-cm. Silver coated nickel offers a lower cost alternat...もっと表示する Epoxies® 40-3909 is a two part epoxy resin adhesive and coating compound, filled with a highly conductive, silver coated nickel. It is designed to provide low volume resistivity of less than 5x10-3 ohm-cm. Silver coated nickel offers a lower cost alternative to many silver filled epoxy systems. 40-3909 has a convenient 1:1 mix ratio by weight and can cure at room temperature overnight but can also be accelerated with mild heat. It is well suited for use in the assembly or repairs of printed circuit boards, connectors, wave guides, high frequency shields, and as a cold solder. 表示を減らす | |
| EPM-2462 | NuSil Silicone Technology 1 | EPM-2462 is a two-part, tan-colored, electrically conductive silicone elastomer that has a 20:1 Mix Ratio (Part A: Part B). This product can be used as a thermally and electrically conductive interface material. It can also be utilized with form-in-place ...もっと表示する EPM-2462 is a two-part, tan-colored, electrically conductive silicone elastomer that has a 20:1 Mix Ratio (Part A: Part B). This product can be used as a thermally and electrically conductive interface material. It can also be utilized with form-in-place conductive gaskets, and for applications that require a material with low volatility. 表示を減らす | |
| CV-2943 | NuSil Silicone Technology 1 | CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under...もっと表示する CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. This product is also utilized as an adhesive for openings in housings or modules where grooves and other configurations require a limited flow material. 表示を減らす | |
| Epoxies® 50-3122 | Epoxies, Etc. | Epoxies® 50-3122 is a one part epoxy adhesive with both high sheer and high peel strength properties. It is also able to maintain exceptionally strong bonds over a wide temperature range of -60 to +205°C. 50-3122 is both a thermally conductive and electri...もっと表示する Epoxies® 50-3122 is a one part epoxy adhesive with both high sheer and high peel strength properties. It is also able to maintain exceptionally strong bonds over a wide temperature range of -60 to +205°C. 50-3122 is both a thermally conductive and electrically insulating epoxy adhesive. It is suitable for electronic, electrical, aerospace, appliance, automotive and industrial applications. 表示を減らす |
