| 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...もっと表示する 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. 表示を減らす | |
| 4653-V-50 Rosin Modified Alkyd | Gabriel Performance Products | 4653-V-50 Rosin Modified Alkyd is a fast drying rosin modified alkyd supplied at 50% non-volatile in VM&P Naphtha. This product can be used for fast drying, low cost enamels and primers. | |
| 4702-X-50 Chain Stopped Alkyd Resin | Gabriel Performance Products | 4702-X-50 Chain Stopped Alkyd Resin is based on low rosin, tall oil fatty acids. This resin gives rapid set and tack free times in air dry systems. | |
| 4714-P-75 Chain Stopped Water Soluble Alkyd Resin | Gabriel Performance Products | 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solve...もっと表示する 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solvent ratio in finished product should be 80:20 ratio of water to co-solvent by volume. 表示を減らす | |
| 4731-X-80 High Solids Polyester Resin | Gabriel Performance Products | 4731-X-80 High Solids Polyester Resin is a low molecular weight, oil free polyester resin designed to be cross linked with melamine type resins in high solids baking enamels. | |
| 4770-X-60 Short Oil Alkyd Resin | Gabriel Performance Products | 4770-X-60 Short Oil Alkyd Resin is a non-drying short oil alkyd resin containing coconut oil. Typical uses include plasticizer for nitrocellulose lacquers, and high quality low yellowing baking enamels with excellent durability. | |
| 4778-X-50 Phenolic/rosin Modified Alkyd Resin | Gabriel Performance Products | 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used ...もっと表示する 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used in the following government specification finishes: TT-P-64C, TT- E-515A, and MIL-E-15090C, Type II. 表示を減らす | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 4915-PMA-85 High Solids Short Oil Alkyd | Gabriel Performance Products | 4915-PMA-85 High Solids Short Oil Alkyd which is cut to 85% non-volatile in PM Acetate Solvent. This resin has good cure response with melamine/butylated melamine type resins and offers a fast reduction curve in aromatic and oxygenated solvents. | |
| 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil | Gabriel Performance Products | 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil can be used for air dry, force dry, and baking applications and is intended for industrial and OEM coatings. | |
| 4986-V-50 VT Modified Alkyd Resin | Gabriel Performance Products | 4986-V-50 VT Modified Alkyd Resin is a fast drying general purpose alkyd resin which features a slow solvent reduction curve. Typical uses include drum enamels, aerosol finishes, and fast drying trade sale enamels. | |
| 4996 Long Oil Alkyd Resin | Gabriel Performance Products | 4996 Long Oil Alkyd Resin is intended for use as a plasticizer for hot melt coatings. | |
| 4997-X-50 Epoxy Ester Resin | Gabriel Performance Products | 4997-X-50 Epoxy Ester Resin is formulated to resist discoloration when exposed to heat. | |
| 4HBA | Kowa Europe GmbH | 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coat...もっと表示する 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coatings, water borne coatings, powder coatings, adhesives, urethane finishes, and UV inkjet ink. 表示を減らす | Request Sample |
| 5009-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5009-BS-70 Water Reducible Alkyd Resin is a general purpose resin designed for air dry, force dry, or low temperature bake applications. This product is supplied at 70% non-volatiles. | |
| 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and...もっと表示する 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and good gloss retention. 表示を減らす | |
| 5018-X-50 Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retenti...もっと表示する 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retention. 表示を減らす | |
| 5121-BC-85 Water Reducible Alkyd Resin | Gabriel Performance Products | 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an ...もっと表示する 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an 80:20 ratio of water to co-solvent. For a baking coating, 12-30% of a melamine resin can be used for cross-linking. Co-solvent and/or melamines and neutralizer should be added to the resin and mixed completely before the addition of water. 表示を減らす | |
| Abiester 90 | Spolchemie | Abiester 90 is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and glycerin. Abiester 90 is primarily used for coatings, hot melt adhesives and is also used in printing inks. | |
| Abifen 125 D | Spolchemie | Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rub...もっと表示する Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rubber mixtures. 表示を減らす | |
| ACRYL SS 300 | CTP Egypt S.A.E. CTP Original | ACRYL SS 300 is a cold hardening methyl methacrylate based resin that is used for the production of high quality solid surface articles. This product can be filled with ATH, mineral fillers, pigments, natural and coloured granules and mixed in batch or co...もっと表示する ACRYL SS 300 is a cold hardening methyl methacrylate based resin that is used for the production of high quality solid surface articles. This product can be filled with ATH, mineral fillers, pigments, natural and coloured granules and mixed in batch or continuous processes preferably under vacuum. 表示を減らす | |
| Acrylic Resin GA-003 | DKSH | Acrylic Resin GA-003 is a solid acrylic resin containing epoxy functionality (GMA acrylic). It is used in thermosetting powder coatings to provide excellent outdoor durability. Typical applications include automotive trim and wheel clear coat. GA-003 can ...もっと表示する Acrylic Resin GA-003 is a solid acrylic resin containing epoxy functionality (GMA acrylic). It is used in thermosetting powder coatings to provide excellent outdoor durability. Typical applications include automotive trim and wheel clear coat. GA-003 can be used with curative like 1, 12-dodecanedioic acid (DDDA) to produce clear coating of high gloss, smoothness and clarity. Other polyacrylic acids and polyanhydrides can also be used as curatives for specific coating properties. This product is available in Europe, Asia and North America. 表示を減らす | Request Sample |
| Adhesion Promoter SZ 9166 | Soltech Ltd | Adhesion Promoter SZ 9166 is a silicon acrylate designed to provide light color, low viscosity, light color, adhesion, low odor, and stability. Common applications of this product include UV cure coatings and EB cure coatings. Adhesion Promoter SZ 9166 is...もっと表示する Adhesion Promoter SZ 9166 is a silicon acrylate designed to provide light color, low viscosity, light color, adhesion, low odor, and stability. Common applications of this product include UV cure coatings and EB cure coatings. Adhesion Promoter SZ 9166 is 100% polymer solid by weight with a viscosity of 1,800-3,600 at 25℃. 表示を減らす | |
| Adhesion Promoter SZ 9167 | Soltech Ltd | Adhesion Promoter SZ 9167 is an acrylate modified acidic adhesion promoter designed to provide light color, low viscosity, adhesion, high reactivity, and stability. Common applications of this product include UV cure coatings and EB cure coatings. Adhesio...もっと表示する Adhesion Promoter SZ 9167 is an acrylate modified acidic adhesion promoter designed to provide light color, low viscosity, adhesion, high reactivity, and stability. Common applications of this product include UV cure coatings and EB cure coatings. Adhesion Promoter SZ 9167 is 100% polymer solid by weight with a viscosity of 2,000-4,000 at 25℃. 表示を減らす | |
| AEROXIDE® ALU 130 | Evonik Operations GmbH, BL Coating Additives | AEROXIDE® ALU 130 is a very fine-particle fumed aluminum oxide with a very high specific surface area. The positive surface charge makes it ideal to control the electrostatic charge in powder coatings. | Request Sample |
| AFCONA - 1501 | AFCONA Additives Sdn Bhd | AFCONA - 1501 is a modified fatty acid polymer in a water solution. This product is compatible with resins most commonly used in water-based coatings and provides pigment wetting, stabilizing performance, and is able to cross-link in polyurethane systems ...もっと表示する AFCONA - 1501 is a modified fatty acid polymer in a water solution. This product is compatible with resins most commonly used in water-based coatings and provides pigment wetting, stabilizing performance, and is able to cross-link in polyurethane systems and baking paints. AFCONA - 1501 functions as a universal dispersing resin tailor-made for the production of aqueous-based universal pigment concentrates, finding application in water-based coatings. 表示を減らす | |
| AFCONA - 1503 | AFCONA Additives Sdn Bhd | AFCONA - 1503 is a modified fatty acid polymer in a water solution, free of solvents and amines. This product is a universal dispersing resin with self-emulsifying properties and is suitable for use in VOC-free pigment concentrates, in the production of ...もっと表示する AFCONA - 1503 is a modified fatty acid polymer in a water solution, free of solvents and amines. This product is a universal dispersing resin with self-emulsifying properties and is suitable for use in VOC-free pigment concentrates, in the production of tinting systems where low shear force is used, and in systems with a wide pH range. AFCONA - 1503 finds application in water- and solvent-based decorative paint systems. 表示を減らす | |
| Agrol® 2.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...もっと表示する Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). 表示を減らす | |
| Agrol® 3.0 AO | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6...もっと表示する Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6866). 表示を減らす | |
| Agrol® 3.6 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...もっと表示する Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). 表示を減らす | |
| Agrol® 4.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...もっと表示する Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). 表示を減らす | |
| Agrol Diamond® | BioBased Technologies | Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (...もっと表示する Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (ASTM D6866) and 70% primary hydroxyl groups. 表示を減らす | |
| Agrol Platinum™ | BioBased Technologies | Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ conta...もっと表示する Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ contains 80.8% bio-based content (ASTM D6866) and Three functional primary hydroxyl groups containing polyol. 表示を減らす | |
| Agrol Prime™ A-110 | BioBased Technologies | Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weigh...もっと表示する Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weight polyol and 67% primary hydroxyl groups. 表示を減らす | |
| Agrol Prime™ A-56 | BioBased Technologies | Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight...もっと表示する Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight polyol and 67% primary hydroxyl groups. 表示を減らす | |
| Alcohol Soluble Maleic Resin SL A130-6 | SWISLOYD LIMITED | Alcohol Soluble Maleic Resin SL A130-6 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 130±5°C. It is often used in surface coatings and pri...もっと表示する Alcohol Soluble Maleic Resin SL A130-6 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 130±5°C. It is often used in surface coatings and primers to improve the gloss, hardness, drying speed, abrasion resistance and yellow resistance, 表示を減らす | |
| Alcohol Soluble Maleic Resin SL A145-10 | SWISLOYD LIMITED | Alcohol Soluble Maleic Resin SL A145-10 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 145±5°C. It is often used in surface coatings and pr...もっと表示する Alcohol Soluble Maleic Resin SL A145-10 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 145±5°C. It is often used in surface coatings and primers to improve the gloss, hardness, drying speed, abrasion resistance and yellow resistance, 表示を減らす | |
| Allyl Pentaerythritol | Perstorp | Allyl Pentaerythritol (APE) is mainly used as a crosslinker in various acrylic polymers used as thickeners. | |
| Alpha-Rez™ 3500 E | Lawter | Alpha-Rez™ 3500 E is a low viscous, modified hydrocarbon resin that has high solubility and displays a good gel response to aluminum gelling agents. It also has a lower water pick-up and functions as a water balance regulator. The product has ideal pigmen...もっと表示する Alpha-Rez™ 3500 E is a low viscous, modified hydrocarbon resin that has high solubility and displays a good gel response to aluminum gelling agents. It also has a lower water pick-up and functions as a water balance regulator. The product has ideal pigment wetting properties causing inks to display a higher gloss. It is used in offset, grinding varnishes and letterpress applications. 表示を減らす | |
| Alpha-Rez™ 3750 E | Lawter | Alpha-Rez™ 3750 E is a modified hydrocarbon resin with a medium soluble, medium viscous resin that displays a low water pick-up and is ideal for use as a water balance regulator. It shows good pigment wetting properties with a high ink gloss. It is used i...もっと表示する Alpha-Rez™ 3750 E is a modified hydrocarbon resin with a medium soluble, medium viscous resin that displays a low water pick-up and is ideal for use as a water balance regulator. It shows good pigment wetting properties with a high ink gloss. It is used in offset, sheet-fed offset and grinding varnishes. 表示を減らす | |
| Alpha-Rez™ 9000 E | Lawter | Alpha-Rez™ 9000 E is a hybrid resin with a high viscosity and high solubility that is suitable for use in high speed presses. It displays ideal water balance and has the benefit of having low tack and low misting properties. The product is used in offset,...もっと表示する Alpha-Rez™ 9000 E is a hybrid resin with a high viscosity and high solubility that is suitable for use in high speed presses. It displays ideal water balance and has the benefit of having low tack and low misting properties. The product is used in offset, sheet-fed and gloss offset as well as letterpress applications. 表示を減らす | |
| Alpha-Rez™ 9250 E | Lawter | Alpha-Rez™ 9250 E is a hybrid resin composed of visco-elastic hydrocarbons and hybrid resins that display a high viscosity and medium solubility. The product has good water balance, low misting and low tack properties. It can be used in offset inks using ...もっと表示する Alpha-Rez™ 9250 E is a hybrid resin composed of visco-elastic hydrocarbons and hybrid resins that display a high viscosity and medium solubility. The product has good water balance, low misting and low tack properties. It can be used in offset inks using fast-running printing processes. 表示を減らす | |
| AM-636 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AM-636, in the form of a clear liquid, is a unique isocyanate based cross-linker disperse-able in water for the use with acrylic and polyurethane resins. It improves the solvent resistance, water resistance, toughness, block resistance, abrasion resistanc...もっと表示する AM-636, in the form of a clear liquid, is a unique isocyanate based cross-linker disperse-able in water for the use with acrylic and polyurethane resins. It improves the solvent resistance, water resistance, toughness, block resistance, abrasion resistance, and flexibility. AM-636 is solvent free and features a low viscosity for ease of integration into coating. 表示を減らす | |
| AM-71 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AM-71, in the form of a whitish liquid, is an alkali swell-able thixotropic type of thickener for viscosity control of all coatings. Water resistance of the coating is affected to a slighter degree than other types of thixotropic thickeners. It is used in...もっと表示する AM-71, in the form of a whitish liquid, is an alkali swell-able thixotropic type of thickener for viscosity control of all coatings. Water resistance of the coating is affected to a slighter degree than other types of thixotropic thickeners. It is used in leather base coat or topcoat applications at levels from 1-3% to increase viscosity and enhance the rheology properties of the coating. 表示を減らす | |
| AM-80 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AM-80, in the form of a translucent liquid, is a rheological additive based on a new hydrophobic chemistry different from the ethoxylated urethane thickeners. It has applications in color coats and base coats and it is used in leather base coat applicatio...もっと表示する AM-80, in the form of a translucent liquid, is a rheological additive based on a new hydrophobic chemistry different from the ethoxylated urethane thickeners. It has applications in color coats and base coats and it is used in leather base coat applications at levels from 1-4% to increase viscosity and enhance the rheology properties of roll coated base coats. . 表示を減らす | |
| Amino Modified Polysiloxane R-8104 | Zhejiang Feidian Chemical Co., Ltd. | R-8104 is an amino modified polysiloxane. It maintains good amino reaction activity and coupling effect, and it provides better storage activity and low volatility. This product is widely used in modified plastics and coating applications. | |
| AQUACER 571 | BYK | AQUACER 571 is a modified rice bran wax emulsion to improve the surface properties of care products, polishes, and aqueous coating systems. | |
| Aqualac AYD-127 | Aquent Impex | Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...もっと表示する Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). 表示を減らす | |
| Aqualac AYD-128 | Aquent Impex | Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...もっと表示する Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). 表示を減らす | |
| Aqualac AYD-801 | Aquent Impex | Aqualac AYD-801 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...もっと表示する Aqualac AYD-801 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-801 has and epoxy equivalent of 450~500 (g/eq) and softening point of 65~75 (℃). 表示を減らす | |
| Aqualac AYD-802 | Aquent Impex | Aqualac AYD-802 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...もっと表示する Aqualac AYD-802 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-802 has and epoxy equivalent of 600~700 (g/eq) and softening point of 81~89 (℃). 表示を減らす | |
| Aqualac AYD-803 | Aquent Impex | Aqualac AYD-803 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...もっと表示する Aqualac AYD-803 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-803 has and epoxy equivalent of 700~900 (g/eq) and softening point of 90~96 (℃). 表示を減らす | |
| Aqualac AYD-803U | Aquent Impex | Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...もっと表示する Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-804 has and epoxy equivalent of 900~1000 (g/eq) and softening point of 96~107 (℃). 表示を減らす | |
| Aqualac AYD-804 | Aquent Impex | Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...もっと表示する Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-804 has and epoxy equivalent of 900~1000 (g/eq) and softening point of 96~107 (℃). 表示を減らす | |
| Aqualac AYDPG- 660 | Aquent Impex | Aqualac AYDPG- 660 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 140-200 (g/eq). | |
| Aqualac AYDPG- 669 | Aquent Impex | Aqualac AYDPG- 669 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 125-143 (g/eq). | |
| Aqualac AYDPG-300 | Aquent Impex | Aqualac AYDPG-300 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 285-310 (g/eq). | |
| Aquarez EVA T25 | Aquaspersions | Aquarez EVA T25 is a water-based emulsion of a tackified, EVA-methacrylic acid terpolymer. This product has a fine particle size and narrow distribution, and exhibits excellent adhesion to a wide variety of substrates, including polypropylene, PVC, paper...もっと表示する Aquarez EVA T25 is a water-based emulsion of a tackified, EVA-methacrylic acid terpolymer. This product has a fine particle size and narrow distribution, and exhibits excellent adhesion to a wide variety of substrates, including polypropylene, PVC, paper and aluminum. It can be used as the base for the formulation of low-activation temperature heat-seal coatings. Aquarez EVA T25 comes in a low-viscosity, water-based form and exhibits excellent storage stability and high emulsion stability in the finished product. 表示を減らす | |
| Aquarez PP41 | Aquaspersions | Aquarez PP41 is an emulsion of modified polypropylene resin. This product should be formulated with other resin emulsion and dispersions in order to enhance adhesion to non-polar substrates such as polypropylene. It can be used in heat-seal and heat-cur...もっと表示する Aquarez PP41 is an emulsion of modified polypropylene resin. This product should be formulated with other resin emulsion and dispersions in order to enhance adhesion to non-polar substrates such as polypropylene. It can be used in heat-seal and heat-cured coating applications. 表示を減らす | |
| Araldite® GT 6099 | Jubail Chemical Industries Co. | Araldite® GT 6099 is a high molecular weight, solid epoxy resin based on Bisphenol A. This product is characterized by its deep-drawing capability, flexibility, impact resistance, and chemical resistance. Araldite® GT 6099 is used in the formulation of he...もっと表示する Araldite® GT 6099 is a high molecular weight, solid epoxy resin based on Bisphenol A. This product is characterized by its deep-drawing capability, flexibility, impact resistance, and chemical resistance. Araldite® GT 6099 is used in the formulation of heat-curing primers and enamels as well as anti-corrosion paints when combined with polyisocyanates. 表示を減らす | |
| Araldite® GT 6609 | Jubail Chemical Industries Co. | Araldite® GT 6609 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, flexibility, impact resistance, and chemical resistance. Araldite® GT 6609 is used in the formulation of baking pr...もっと表示する Araldite® GT 6609 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, flexibility, impact resistance, and chemical resistance. Araldite® GT 6609 is used in the formulation of baking primers and enamels as well as cold-curing coatings when combined with polyisocyanates. 表示を減らす | |
| Aromatic C9 Hydrocarbon Resin Aquatac I100 | Aquent Impex | Aromatic C9 Hydrocarbon Resin Aquatac I100 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer...もっと表示する Aromatic C9 Hydrocarbon Resin Aquatac I100 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I100 has an Gardner colour value of 3-4. 表示を減らす | |
| Aromatic C9 Hydrocarbon Resin Aquatac I120S | Aquent Impex | Aromatic C9 Hydrocarbon Resin Aquatac I120S is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polyme...もっと表示する Aromatic C9 Hydrocarbon Resin Aquatac I120S is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I120S has an Gardner colour value of 4-5. 表示を減らす | |
| Aromatic C9 Hydrocarbon Resin Aquatac I140 | Aquent Impex | Aromatic C9 Hydrocarbon Resin Aquatac I140 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer...もっと表示する Aromatic C9 Hydrocarbon Resin Aquatac I140 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I140 has an Gardner colour value of 5-6. 表示を減らす | |
| Aromatic Soluble Maleic Resin SL E120-6 | SWISLOYD LIMITED | Aromatic Soluble Maleic Resin SL E120-6 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 120±5°C. It is often used in surface coatings and pr...もっと表示する Aromatic Soluble Maleic Resin SL E120-6 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 120±5°C. It is often used in surface coatings and primers to improve the gloss, hardness, drying speed, abrasion resistance and yellow resistance, 表示を減らす | |
| Aromatic Soluble Maleic Resin SL E130-5 | SWISLOYD LIMITED | Aromatic Soluble Maleic Resin SL E130-5 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 130±5°C. It is often used in surface coatings and pr...もっと表示する Aromatic Soluble Maleic Resin SL E130-5 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 130±5°C. It is often used in surface coatings and primers to improve the gloss, hardness, drying speed, abrasion resistance and yellow resistance, 表示を減らす | |
| AT-3000 | Antex Chemicals (Zhongshan) Limited | AT-3000 is a styrene acrylic copolymer emulsion that appears as a milky, white liquid, and has excellent water resistance, alkali resistance, and compatibility with cement and calcium ion stability. This product can be used for making electrometric skim c...もっと表示する AT-3000 is a styrene acrylic copolymer emulsion that appears as a milky, white liquid, and has excellent water resistance, alkali resistance, and compatibility with cement and calcium ion stability. This product can be used for making electrometric skim coating applications. 表示を減らす | |
| AT-3000M | Antex Chemicals (Zhongshan) Limited | AT-3000M is a styrene acrylic copolymer emulsion that appears as a milky, white liquid, and has good water and alkali resistance characteristics. This product is designed for making water proof membrane for roof tops and basements, electrometric skim coat...もっと表示する AT-3000M is a styrene acrylic copolymer emulsion that appears as a milky, white liquid, and has good water and alkali resistance characteristics. This product is designed for making water proof membrane for roof tops and basements, electrometric skim coatings, and as a primer for cement walls. 表示を減らす | |
| AT-3066 | Antex Chemicals (Zhongshan) Limited | AT-3066 is an all acrylic copolymer that appears as a translucent liquid, and has good adhesion and excellent water and yellowing resistance. This product can be used for making top coat for stone paint. | |
| AT-3099 | Antex Chemicals (Zhongshan) Limited | AT-3099 is an all-acrylic copolymer that appears as a milky, white liquid, and features excellent alkaline resistance, wet scrub resistance, and water resistance. This product is designed for making high performance exterior gloss and flat paint. | |
| AT-3356 | Antex Chemicals (Zhongshan) Limited | AT-3356 is a modified acrylic copolymer that is a translucent liquid with strong infiltration, excellent adhesion, outstanding water resistance, excellent alkali and salt resistance properties. This product is often used in colored paint and outside speci...もっと表示する AT-3356 is a modified acrylic copolymer that is a translucent liquid with strong infiltration, excellent adhesion, outstanding water resistance, excellent alkali and salt resistance properties. This product is often used in colored paint and outside special primer. 表示を減らす | |
| AT-3875MX | Antex Chemicals (Zhongshan) Limited | AT-3875MX is a styrene acrylic copolymer emulsion that appears as a milky, white liquid, and features excellent water and alkali resistance. This product can be used in compendious membrane for water proofing for roof tops, swimming pools, and basements. | |
| AT-6806A | Antex Chemicals (Zhongshan) Limited | AT-6806A is a styrene acrylic copolymer emulsion that appears as a milky, white liquid. This product has high glass transition temperature and good mechanical stability properties. It can be used in coatings and exhibit good resilience and hard hand-feel. | |
| AT-6821A | Antex Chemicals (Zhongshan) Limited | AT-6821A is a styrene acrylic copolymer that appears as a milky, white liquid, and features good adhesion to various substrates. This product can be used for its good water resistance, good hand-feel and fullness. | |
| Atrelux UV1500 | Atcoat GmbH | Atrelux UV1500 is polyester acrylic resin for the formulation of electron beam and UV curing varnishes, paints, and lacquers. It is almost a colorless resin with good reactivity that forms elastic, chemical, and scratch resistant films with good adhesion ...もっと表示する Atrelux UV1500 is polyester acrylic resin for the formulation of electron beam and UV curing varnishes, paints, and lacquers. It is almost a colorless resin with good reactivity that forms elastic, chemical, and scratch resistant films with good adhesion properties, even on plastic surface. Atrelux UV1500 has a solid of 100% and a viscosity of 40 to 60 dPas. 表示を減らす | |
| Atrelux UV1600 | Atcoat GmbH | Atrelux UV1600 is polyester acrylic resin for the formulation of electron beam and UV curing varnishes, paints, and lacquers. It is almost a colorless resin with good reactivity that forms elastic, chemical, and scratch resistant films with good adhesion ...もっと表示する Atrelux UV1600 is polyester acrylic resin for the formulation of electron beam and UV curing varnishes, paints, and lacquers. It is almost a colorless resin with good reactivity that forms elastic, chemical, and scratch resistant films with good adhesion properties, even on plastic surface. Atrelux UV1600 has a solid of 100% and a viscosity of 15 to 30 dPas. 表示を減らす | |
| Atrelux UV3800 | Atcoat GmbH | Atrelux UV3800 is a low odor, low viscous, epoxy acrylate resin for the production of UV/Electron beam curing lacquers and varnishes with good chemical resistance, pigment wetting, high hardness, durable films, high reactivity, and forms hard scratch res...もっと表示する Atrelux UV3800 is a low odor, low viscous, epoxy acrylate resin for the production of UV/Electron beam curing lacquers and varnishes with good chemical resistance, pigment wetting, high hardness, durable films, high reactivity, and forms hard scratch resistant. Atrelux UV3800 has a solid of 100% and a viscosity of 120 to 250 dPas. 表示を減らす | |
| Atreplus LA 20 | Atcoat GmbH | Atreplus LA 20 is a low viscous binder system, consisting of high quality fatty acids, suitable for impregnation, lacquers, wood oils, low solvent penetrating, and varnishes. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, ...もっと表示する Atreplus LA 20 is a low viscous binder system, consisting of high quality fatty acids, suitable for impregnation, lacquers, wood oils, low solvent penetrating, and varnishes. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atreplus LA 20 has a solid of 100% and a viscosity of 50 to 70 sec (DIN4). 表示を減らす | |
| Atrepol P140/80 BA | Atcoat GmbH | Atrepol P140/80 BA is a saturated poly ester resin, consisting of butylacetat, in combination with aliphatic polyisocyanates, flexible lacquers can be produced. Atrepol P140/80 BA has a solid of 80% and a viscosity of 10 to 30 dPas. | |
| Atrepol P165 | Atcoat GmbH | Atrepol P165 is a saturated poly ester resin that is highly recommended for potting compounds and high solid 2-K and 2-K PUR coatings. Atrepol P165 has a solid of 100% and a viscosity of 35 to 45 dPas. | |
| Atrepol P20 | Atcoat GmbH | Atrepol P20 is a saturated poly ester color stable resin with extremely low viscosity for impregnations, printing inks, stains, lacquers, reactive, wood treatment oils, and is environmentally friendly. Atrepol P20 has a solid of 100% and a viscosity of 60...もっと表示する Atrepol P20 is a saturated poly ester color stable resin with extremely low viscosity for impregnations, printing inks, stains, lacquers, reactive, wood treatment oils, and is environmentally friendly. Atrepol P20 has a solid of 100% and a viscosity of 60 to 80 sec. 表示を減らす | |
| Atrepol P300/75 X | Atcoat GmbH | Atrepol P300/75 X is a saturated poly ester resin that is suitable for basic pastes and grind in numerous applications, due to its broad compatibility with its good wetting properties and other resins. Atrepol P300/75 X has a solid of 75% and a viscosity ...もっと表示する Atrepol P300/75 X is a saturated poly ester resin that is suitable for basic pastes and grind in numerous applications, due to its broad compatibility with its good wetting properties and other resins. Atrepol P300/75 X has a solid of 75% and a viscosity of 20 to 30 sec. 表示を減らす | |
| Atrepol P350 | Atcoat GmbH | Atrepol P350 is a solvent free, low branched aliphatic polyester resin with good compatibility and wetting properties for coatings. Atrepol P350 has a solid of 100% and a viscosity of 50 to 2000 dPas. | |
| Atrepox E1765/60 X | Atcoat GmbH | Atrepox E1765/60 X is an epoxy ester resin that is chemical and mechanical durable with good adhesion for coatings. Atrepox E1765/60 X has a solid of 60% and a viscosity of 10 to 15 dPas. | |
| Atrepox E1784/60 K3 | Atcoat GmbH | Atrepox E1784/60 K3 is an epoxy ester resin, consisting of whit spirit, with chemical durability, flexibility, good drying properties, and adhesion for coatings. Atrepox E1784/60 K3 has a solid of 60% and a viscosity of 14 to 22 dPas. | |
| Atrepox ED401/50 X | Atcoat GmbH | Atrepox ED401/50 X is an epoxy ester resin with chemical durability, fast drying, and excellent adhesion for coatings. Atrepox ED401/50 X has a solid of 50% and a viscosity of 250 to 400 sec. | |
| Atrepur HS 500/70 D4 | Atcoat GmbH | Atrepur HS 500/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...もっと表示する Atrepur HS 500/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 500/70 D4 has an oil length of 57, a solid of 70%, and a viscosity of 9000 to 12000 mPas. 表示を減らす | |
| Atrepur HS 550/70 D4 | Atcoat GmbH | Atrepur HS 550/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...もっと表示する Atrepur HS 550/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 550/70 D4 has an oil length of 58, a solid of 70%, and a viscosity of 13000 to 17000 mPas. 表示を減らす | |
| Atrepur HS 600/70 IPL | Atcoat GmbH | Atrepur HS 600/70 IPL is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for HS parquet paints, decorative paints, and...もっと表示する Atrepur HS 600/70 IPL is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for HS parquet paints, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 600/70 IPL has an oil length of 63, a solid of 70%, and a viscosity of 5000 to 9000 mPas. 表示を減らす | |
| Atrepur HS 700/70 D4 | Atcoat GmbH | Atrepur HS 700/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...もっと表示する Atrepur HS 700/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 700/70 D4 has an oil length of 60, a solid of 70%, and a viscosity of 9000 to 13000 mPas. 表示を減らす | |
| Atrepur HS 800/80 D4 | Atcoat GmbH | Atrepur HS 800/80 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...もっと表示する Atrepur HS 800/80 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 800/80 D4 has an oil length of 60, a solid of 80%, and a viscosity of 4000 to 8000 mPas. 表示を減らす | |
| Atrepur U1010 HS | Atcoat GmbH | Atrepur U1010 HS is an aliphatic 100% urethane alkyd resin, consisting of talloil, suitable for the production of VOC compliant paints with fast drying and yellowing resistant. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant...もっと表示する Atrepur U1010 HS is an aliphatic 100% urethane alkyd resin, consisting of talloil, suitable for the production of VOC compliant paints with fast drying and yellowing resistant. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U1010 HS has an oil length of 82, a solid of 100%, and a viscosity of 80 to 100 dPas. 表示を減らす | |
| Atrepur U41/65 BA | Atcoat GmbH | Atrepur U41/65 BA is a medium oil urethane modified alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of forced drying and air drying primers and lacquers with good flexibility and adhesion. Atcoat alkyd resin...もっと表示する Atrepur U41/65 BA is a medium oil urethane modified alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of forced drying and air drying primers and lacquers with good flexibility and adhesion. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U41/65 BA has an oil length of 41, a solid of 65%, and a viscosity of 17 to 33 dPas. 表示を減らす | |
| Atrepur U600/60 D4 | Atcoat GmbH | Atrepur U600/60 D4 is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd re...もっと表示する Atrepur U600/60 D4 is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/60 D4 has an oil length of 60, a solid of 60%, and a viscosity of 26 to 35 dPas. 表示を減らす | |
| Atrepur U600/60 IP | Atcoat GmbH | Atrepur U600/60 IP is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd re...もっと表示する Atrepur U600/60 IP is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/60 IP has an oil length of 63, a solid of 60%, and a viscosity of 27 to 35 dPas. 表示を減らす | |
| Atrepur U600/60 K3 | Atcoat GmbH | Atrepur U600/60 K3 is a urethane alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd resins ...もっと表示する Atrepur U600/60 K3 is a urethane alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/60 K3 has an oil length of 60, a solid of 60%, and a viscosity of 25 to 35 dPas. 表示を減らす | |
| Atrepur U600/AL55 D6 | Atcoat GmbH | Atrepur U600/AL55 D6 is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion protection systems and fast drying lacquers. Atcoat alkyd resins are based on natural raw materials like ...もっと表示する Atrepur U600/AL55 D6 is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion protection systems and fast drying lacquers. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/AL55 D6 has an oil length of 60, a solid of 55%, and a viscosity of 40 to 60 dPas. 表示を減らす | |
| Atrepur U600/HS70 IP J | Atcoat GmbH | Atrepur U600/HS70 IP J is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, suitable for the production of corrosion resistant systems and fast drying lacquers. Atcoat alkyd resins are based on natural raw materials like fatty acids, pl...もっと表示する Atrepur U600/HS70 IP J is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, suitable for the production of corrosion resistant systems and fast drying lacquers. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/HS70 IP J has an oil length of 60, a solid of 70%, and a viscosity of 45 to 65 dPas. 表示を減らす | |
| Atrepur U600HS/75 D4 | Atcoat GmbH | Atrepur U600HS/75 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant systems, fast drying lacquers, and VOC complaint with good hardness. Atcoat alkyd resins are based on nat...もっと表示する Atrepur U600HS/75 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant systems, fast drying lacquers, and VOC complaint with good hardness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600HS/75 D4 has an oil length of 60, a solid of 75%, and a viscosity of 45 to 65 dPas. 表示を減らす | |
| Atresal C 144/70 D4 | Atcoat GmbH | Atresal C 144/70 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for paints and primers with good drying, pigment compatibility, and gloss conservation. Atcoat alkyd resins are based on natural raw materials like fatty aci...もっと表示する Atresal C 144/70 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for paints and primers with good drying, pigment compatibility, and gloss conservation. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 144/70 D4 has an oil length of 62, a solid of 70%, and a viscosity of 4200 to 5200 mPas. 表示を減らす |
