| Epoxies® 70-3812 NC | Epoxies, Etc. | Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulate...もっと表示する Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulated with a unique combination of fillers, particle sizes and dispersion techniques. It is well suited for use with a variety of heat sink applications and its viscosity is particularly good for Fin bonding. 表示を減らす | |
| Solacril 105 ACP | Ichemco | Solacril 105 ACP is a solventborne, solvent-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of 2-5 cm, and has a peel of 2500-3000 g/in. Solacril 105 ACP is most commonly used in the production of protectiv...もっと表示する Solacril 105 ACP is a solventborne, solvent-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of 2-5 cm, and has a peel of 2500-3000 g/in. Solacril 105 ACP is most commonly used in the production of protective films for plastic and metal surfaces, as well as removable tapes and labels. 表示を減らす | |
| Solacril 203 | Ichemco | Solacril 203 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 38-42% and a peel of 600-800 g/in. Solacril 203 is most commonly used in protective film applications. | |
| Solacril 204 | Ichemco | Solacril 204 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of 1-3 cm, and a peel of 500-800 g/in. Solacril 204 is most commonly used in protective film applications. | |
| Tackwhite A 33 | Ichemco | Tackwhite A 33 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 200-400 mPa.s. Tackwhite A 33 is most commonly used in transparent label, transparent tape, and li...もっと表示する Tackwhite A 33 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 200-400 mPa.s. Tackwhite A 33 is most commonly used in transparent label, transparent tape, and light-resistant pressure sensitive article applications. 表示を減らす | |
| Tackwhite A 33 (V1) | Ichemco | Tackwhite A 33 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 33 (V1) is most commonly used in transparent label, transpar...もっと表示する Tackwhite A 33 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 33 (V1) is most commonly used in transparent label, transparent tape, and light-resistant pressure sensitive article applications. 表示を減らす | |
| Tackwhite A 33 (V2) | Ichemco | Tackwhite A 33 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 33 (V2) is most commonly used in transparent label, transpar...もっと表示する Tackwhite A 33 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 33 (V2) is most commonly used in transparent label, transparent tape, and light-resistant pressure sensitive article applications. 表示を減らす | |
| Tackwhite A 4 MED | Ichemco | Tackwhite A 4 MED is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite A 4 MED is most commonly used in pressure sensitive article applicatio...もっと表示する Tackwhite A 4 MED is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite A 4 MED is most commonly used in pressure sensitive article applications where higher tack, adhesion, water-resistance, and cold-resistance properties are required. 表示を減らす | |
| Tackwhite A 4 MED (V2) | Ichemco | Tackwhite A 4 MED (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 4 MED (V2) is most commonly used in pressure sensitive ar...もっと表示する Tackwhite A 4 MED (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 4 MED (V2) is most commonly used in pressure sensitive article applications where higher tack, adhesion, water-resistance, and cold-resistance properties are required. 表示を減らす | |
| Tackwhite A 80 FR | Ichemco | Tackwhite A 80 FR is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 52-56%, a tack of 5 cm, and a peel of 400 g/in. Tackwhite A 80 FR is most commonly used as a fire retardant in film coating applications. | |
| Tackwhite AP 03 HP | Ichemco | Tackwhite AP 03 HP is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 6-12 cm, and a peel of 1300-1600 g/in. Tackwhite AP 03 HP is most commonly used in protective polyethylene film productio...もっと表示する Tackwhite AP 03 HP is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 6-12 cm, and a peel of 1300-1600 g/in. Tackwhite AP 03 HP is most commonly used in protective polyethylene film production applications. 表示を減らす | |
| Tackwhite AP 15 | Ichemco | Tackwhite AP 15 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 45-47%, a tack of 8-15 cm, and a peel of 500-1000 g/in. Tackwhite AP 15 is most commonly used in protective polyethylene film production appli...もっと表示する Tackwhite AP 15 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 45-47%, a tack of 8-15 cm, and a peel of 500-1000 g/in. Tackwhite AP 15 is most commonly used in protective polyethylene film production applications. 表示を減らす | |
| Tackwhite AP 15 M | Ichemco | Tackwhite AP 15 M is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 43-47%, a tack of 8-15 cm, and a peel of 500-1000 g/in. Tackwhite AP 15 M is most commonly used in protective polyethylene film production a...もっと表示する Tackwhite AP 15 M is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 43-47%, a tack of 8-15 cm, and a peel of 500-1000 g/in. Tackwhite AP 15 M is most commonly used in protective polyethylene film production applications. 表示を減らす | |
| Tackwhite NA 55 | Ichemco | Tackwhite NA 55 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% as a Brookfield viscosity at 25°C of less than 500 mPa.s. Tackwhite NA 55 is most commonly used in protective polyethylene film product...もっと表示する Tackwhite NA 55 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% as a Brookfield viscosity at 25°C of less than 500 mPa.s. Tackwhite NA 55 is most commonly used in protective polyethylene film production applications. 表示を減らす | |
| WorléeCryl® 7135 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7135 is a styrene acrylic copolymer emulsion. It is used for topcoats on metal, wood and plastics (PS, ABS). This product is also for temporary anti-corrosive primers on metal, and it can be combined with water thinnable alkyd resins. This gra...もっと表示する WorléeCryl® 7135 is a styrene acrylic copolymer emulsion. It is used for topcoats on metal, wood and plastics (PS, ABS). This product is also for temporary anti-corrosive primers on metal, and it can be combined with water thinnable alkyd resins. This grade is supplied in the form of 42% in water. 表示を減らす |
