| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...もっと表示する 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. 表示を減らす | |
| Abiester 90 | Spolchemie | Abiester 90 is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and glycerin. Abiester 90 is primarily used for coatings, hot melt adhesives and is also used in printing inks. | |
| Abifen 125 D | Spolchemie | Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rub...もっと表示する Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rubber mixtures. 表示を減らす | |
| Abimal 125 | Spolchemie | Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It al...もっと表示する Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It also provides weather resistance and gloss finish. 表示を減らす | |
| Burez® DRS P80 E | Lawter | Burez® DRS P80 E is a potassium soap of disproportionated rosin with 80% solids and has as its main application as an emulsifier in emulsion polymerization. The rosin soap is part of the Burez® range of products that is also designed for wet glue formulat...もっと表示する Burez® DRS P80 E is a potassium soap of disproportionated rosin with 80% solids and has as its main application as an emulsifier in emulsion polymerization. The rosin soap is part of the Burez® range of products that is also designed for wet glue formulations and organic pigment production, with applications in pigment coatings and adhesives. 表示を減らす | |
| Burez® DRS S70 E | Lawter | Burez® DRS S70 E is a rosin soap with 70% solids content and is a sodium soap of disproportionated rosin. Its main application is as an emulsifier in emulsion polymerization. The rosin soap is part of the Burez® range of products that is also designed fo...もっと表示する Burez® DRS S70 E is a rosin soap with 70% solids content and is a sodium soap of disproportionated rosin. Its main application is as an emulsifier in emulsion polymerization. The rosin soap is part of the Burez® range of products that is also designed for wet glue formulations and organic pigment production, with applications in pigment coatings and adhesives. 表示を減らす | |
| Burez® K80 505A E | Lawter | Burez® K80 505A E is a potassium soap with 80% solids and is considered for use primarily in resin pigments for inks. The Burez® range of products is mainly designed for emulsion polymerization, wet glue formulations and organic pigment production. | |
| Burez® NA45 E | Lawter | Burez® NA45 E is a sodium soap of modified rosin that has been stabilized to prevent crystallization. Its main application is its use in bottle labeling adhesives. The Burez® range of products is designed for emulsion polymerization, wet glue formulations...もっと表示する Burez® NA45 E is a sodium soap of modified rosin that has been stabilized to prevent crystallization. Its main application is its use in bottle labeling adhesives. The Burez® range of products is designed for emulsion polymerization, wet glue formulations and organic pigment production. 表示を減らす | |
| C-1032 | Macro Polymers Pvt. Ltd. | C-1032 is a short-oil glycerol-esterified resin, that has been modified with coconut oil. This product provides good hardness, high gloss, yellowing resistance and flexibility in stoving enamels. It can be used in stoving enamels for automotive and kitc...もっと表示する C-1032 is a short-oil glycerol-esterified resin, that has been modified with coconut oil. This product provides good hardness, high gloss, yellowing resistance and flexibility in stoving enamels. It can be used in stoving enamels for automotive and kitchen appliance applications. 表示を減らす | |
| Cinergi™ 2100 E | Lawter | Cinergi™ 2100 E is a special varnish that is non-volatile and which is based on rosin resin, vegetable oil and mineral distillates. It shows good leafing, high gloss and oxidation and rub resistance. The product is ideally suited for metallic inks and has...もっと表示する Cinergi™ 2100 E is a special varnish that is non-volatile and which is based on rosin resin, vegetable oil and mineral distillates. It shows good leafing, high gloss and oxidation and rub resistance. The product is ideally suited for metallic inks and has application in offset, sheet-fed, web-fed and letterpress printing techniques. 表示を減らす | |
| Cinergi™ 2239 E | Lawter | Cinergi™ 2239 E is a gel varnish that is fast setting with a high gloss. It has good water as well as heat and shear resistance qualities and finds uses in offset, quickset, sheet-fed and gloss offset inks. | |
| Cinergi™ 4170 E | Lawter | Cinergi™ 4170 E is a special, 100% non-volatile varnish from rosin-based resin, vegetable oil, rosin ester and tung oil. It has a tough, hard film and is rub, scruff, grease, alkali and detergent resistant. The product is used in offset, packaging, sheet-...もっと表示する Cinergi™ 4170 E is a special, 100% non-volatile varnish from rosin-based resin, vegetable oil, rosin ester and tung oil. It has a tough, hard film and is rub, scruff, grease, alkali and detergent resistant. The product is used in offset, packaging, sheet-fed and 100% NV inks as well as in overprint varnishes. 表示を減らす | |
| Cinergi™ 7000 E | Lawter | Cinergi™ 7000 E is a non-volatile gloss varnish based on vegetable oils and rosin-based resin. It shows better resistance to fountain solutions that have alcohol and also displays water resistance to metal deco inks. The product improves transfer due to a...もっと表示する Cinergi™ 7000 E is a non-volatile gloss varnish based on vegetable oils and rosin-based resin. It shows better resistance to fountain solutions that have alcohol and also displays water resistance to metal deco inks. The product improves transfer due to a high tack and displays a high print quality under trying press conditions. It is used in offset, sheet-fed, gloss offset, screen ink and letterpress applications. 表示を減らす | |
| Cinergi™ 7101 E | Lawter | Cinergi™ 7101 E is a gel varnish from rosin-based resins, mineral distillates and alkyd resins that show high gloss, has fast setting and good water balance properties. It is used as a let down varnish or gel in sheet-fed and quickset offset inks and can ...もっと表示する Cinergi™ 7101 E is a gel varnish from rosin-based resins, mineral distillates and alkyd resins that show high gloss, has fast setting and good water balance properties. It is used as a let down varnish or gel in sheet-fed and quickset offset inks and can be combined with pigment wetting varnishes. 表示を減らす | |
| Cinergi™ 7105 E | Lawter | Cinergi™ 7105 E is a gel varnish from rosin-based resins, ester solvents, gelling agents, alkyd resins and vegetable oil. It shows good setting combined with high gloss, has good heat and shear resistance properties and good lithographic behavior. The pro...もっと表示する Cinergi™ 7105 E is a gel varnish from rosin-based resins, ester solvents, gelling agents, alkyd resins and vegetable oil. It shows good setting combined with high gloss, has good heat and shear resistance properties and good lithographic behavior. The product is used as a let down varnish or gel in quickset offset inks or in sheet-fed inks for high speed presses. 表示を減らす | |
| Cinergi™ 7106 E | Lawter | Cinergi™ 7106 E is a gel varnish made up of a rosin-based resins, gelling agents, ester of vegetable oils and mineral distillates. It shows high gloss, is fast setting and has good water balance on fast presses. The product is used as a varnish or gel in ...もっと表示する Cinergi™ 7106 E is a gel varnish made up of a rosin-based resins, gelling agents, ester of vegetable oils and mineral distillates. It shows high gloss, is fast setting and has good water balance on fast presses. The product is used as a varnish or gel in sheet-fed and quickset offset inks. 表示を減らす | |
| Cinergi™ 7107 E | Lawter | Cinergi™ 7107 E is a gel varnish based on modified rosin-based resin, mineral distillates and vegetable oil. It is fast setting, has good water balance and print sharpness. The product shows a medium viscosity together with a low yield value and is used a...もっと表示する Cinergi™ 7107 E is a gel varnish based on modified rosin-based resin, mineral distillates and vegetable oil. It is fast setting, has good water balance and print sharpness. The product shows a medium viscosity together with a low yield value and is used as a varnish or gel in sheet-fed and quickset offset inks. 表示を減らす | |
| Cinergi™ 8000 E | Lawter | Cinergi™ 8000 E is a gloss varnish that is 100% non-volatile and which is based on vegetable oils and rosin-based resins. It displays good rub resistance, is water resistant and fast setting with a high gloss. It has the ability to replace alkyds in inks ...もっと表示する Cinergi™ 8000 E is a gloss varnish that is 100% non-volatile and which is based on vegetable oils and rosin-based resins. It displays good rub resistance, is water resistant and fast setting with a high gloss. It has the ability to replace alkyds in inks and varnishes and is ideally used in offset, sheet-fed, gloss offset and metal deco applications. 表示を減らす | |
| Cinergi™ 8001 E | Lawter | Cinergi™ 8001 E is a non-volatile gloss varnish derived from rosin-based resins and vegetable oils that have the characteristics of being water resistant, are able to replace alkyds in inks and varnishes, and have good rub resistance. The product is also ...もっと表示する Cinergi™ 8001 E is a non-volatile gloss varnish derived from rosin-based resins and vegetable oils that have the characteristics of being water resistant, are able to replace alkyds in inks and varnishes, and have good rub resistance. The product is also fast setting with a high gloss that is ideal for use in sheet-fed, offset and gloss offset applications. 表示を減らす | |
| Decotherm™ 100 E | Lawter | Decotherm™ 100 E is a gel varnish from rosin-based resin, gelling agents, alkyd resin and mineral distillates. It displays high gloss, has fast drying and curing abilities with good adhesion to steel, aluminum and tin. The product is used in inks printed ...もっと表示する Decotherm™ 100 E is a gel varnish from rosin-based resin, gelling agents, alkyd resin and mineral distillates. It displays high gloss, has fast drying and curing abilities with good adhesion to steel, aluminum and tin. The product is used in inks printed on steel, flat tin or aluminum products. 表示を減らす | |
| Decotherm™ 220 E | Lawter | Decotherm™ 220 E is a polyester resin dissolved in Dobanol 23 and tridecylalcohol in metal deco inks for dry offset or spindle printing on a 2-piece decorative can. It shows good adhesion to metals with a high gloss, good printability, transfer and MEK re...もっと表示する Decotherm™ 220 E is a polyester resin dissolved in Dobanol 23 and tridecylalcohol in metal deco inks for dry offset or spindle printing on a 2-piece decorative can. It shows good adhesion to metals with a high gloss, good printability, transfer and MEK resistance. Other applications include uses in white and colored inks. 表示を減らす | |
| Decotherm™ 255 E | Lawter | Decotherm™ 255 E is a blocked catalyst acid that is dissolved in TXIB and is used to catalyze the cure of melamine and polyester resins at higher temperatures. Its has a fast cure speed and is meant for metal deco inks that are printed with spindle printi...もっと表示する Decotherm™ 255 E is a blocked catalyst acid that is dissolved in TXIB and is used to catalyze the cure of melamine and polyester resins at higher temperatures. Its has a fast cure speed and is meant for metal deco inks that are printed with spindle printing or dry offsets for 2-piece decorative cans. Other applications include colored or white inks. 表示を減らす | |
| Disvimol-101 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-101 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and is compatible with alkyds. It is used in high gloss synthetic enamels. It can also be used in general inks, letterpress inks, and offset gloss i...もっと表示する Disvimol-101 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and is compatible with alkyds. It is used in high gloss synthetic enamels. It can also be used in general inks, letterpress inks, and offset gloss inks. 表示を減らす | |
| Disvimol-101(M) | D.S.V. Chemicals Pvt. Ltd. | Disvimol-101(M) is a rosin derivative that has been modified with maleic acid. This product has high gloss and is oil soluble. It can be used in synthetic enamels. | |
| Disvimol-102 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-102 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and compatible with nitrocellulose substrates. It can be used in nitrocellulose lacquers and putty, in vinyl lacquers, and in flexographic inks. | |
| Disvimol-104 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-104 is a rosin derivative that has been modified with maleic acid. This product is soluble in mineral spirits. It can be used in picture varnishes, paper coating, ballpoint pen inks, and liquid inks. | |
| Disvimol-106 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-106 is a rosin derivative that has been modified with maleic acid. This product is soluble in mineral spirits. It can be used in picture varnishes, ballpoint pen inks, and liquid inks. | |
| Disvipol-201 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-201 is a rosin derivative that has been modified with a phenolic compound. This product is scratchproof and has better solvent release. It can be used in letterpress inks, offset inks, and liquid inks. | |
| Disvipol-203 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-203 is a rosin derivative. This product has been modified with phenolic compounds. It can be used in anticorrosive paints, marine finishes, sealants, primers, insulating varnishes, and oil varnishes. | |
| Disvipol-205 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-205 is a rosin derivative. This product has been modified with phenolic compounds and offers high gloss. It can be used in letterpress inks, offset inks, and gravure printing inks. | |
| Disvipol-207 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-207 is a rosin derivative. This product has been modified with phenolic compounds and offers high gloss in the final result. It can be used in web offset and quickset inks. | |
| Disvipol-209 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-209 is a rosin derivative that has been modified with a phenolic compound. This product has good solubility in aliphatic hydrocarbon solvents. It can be used in high quality quickset or sheet-fed inks. | |
| Disvipol-251 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-251 is a phenolic resin with high purity. This product is soluble in Novolac. It can be used in flexogravure inks, spirit varnishes, aniline inks, anti-corrosion lacquers, and traffic paints. | |
| Disvipol-252 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-252 is a phenolic resin. This product has high purity, is oil-resistant, and is compatible with neoprene rubber solutions. It can be used in flexogravure inks, spirit varnishes, traffic paints, and adhesives. | |
| Disvipol-271 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-271 is a phenolic resin. This product has high purity and is very chemical- and weather-resistant. It can be used in spar varnishes, marine enamels, Tung oil-adducts for offset printing, and wire enamels. | |
| Droester™ 2751 | D.R. Coats Ink & Resins Pvt. Ltd. | Droester™ 2751 is a Penta Erythritol Esterified Rosin. | |
| Droester™ 2752 | D.R. Coats Ink & Resins Pvt. Ltd. | Droester™ 2752 is a Glycerine Esterified Rosin. | |
| Dromal™ 2351 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromal™ 2351 is Rosin modified Maleic Resin. | |
| Dromal™ 2354 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromal™ 2354 is Rosin modified Maleic Resin. | |
| Dropol™ 2201 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2201 is a Rosin Modified Phenolic Resin. | |
| Dropol™ 2203 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2203 is a Rosin Modified Phenolic Resin. | |
| Dropol™ 2205 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2205 is a Rosin Modified Phenolic Resin. | |
| Eco-Rez™ 1621 E | Lawter | Eco-Rez™ 1621 E is a polyol-modified rosin resin that is free of formaldehyde and phenols. It displays a high solubility and low viscosity in mineral distillates. The product is also fast setting, has a low odor, a high gloss and good pigment wetting prop...もっと表示する Eco-Rez™ 1621 E is a polyol-modified rosin resin that is free of formaldehyde and phenols. It displays a high solubility and low viscosity in mineral distillates. The product is also fast setting, has a low odor, a high gloss and good pigment wetting properties. It is used in offset, sheet-fed, grinding varnishes and low odor inks. 表示を減らす | |
| Eco-Rez™ 4237 E | Lawter | Eco-Rez™ 4237 E is a formaldehyde and phenol-free rosin resin that has low solubility combined with high viscosity in mineral distillates. It is fast setting, has a high melt point, low odor and light color making it ideal for use in OPV varnishes and low...もっと表示する Eco-Rez™ 4237 E is a formaldehyde and phenol-free rosin resin that has low solubility combined with high viscosity in mineral distillates. It is fast setting, has a high melt point, low odor and light color making it ideal for use in OPV varnishes and low odor inks. 表示を減らす | |
| Eco-Rez™ 4440 E | Lawter | Eco-Rez™ 4440 E is a rosin resin that is free of phenols and formaldehyde, with a medium to low viscosity and medium solubility in mineral distillates. It has high gloss, is fast setting with good pigment wetting properties. The product can be used in off...もっと表示する Eco-Rez™ 4440 E is a rosin resin that is free of phenols and formaldehyde, with a medium to low viscosity and medium solubility in mineral distillates. It has high gloss, is fast setting with good pigment wetting properties. The product can be used in offset, sheet-fed and low odor inks. 表示を減らす | |
| Eco-Rez™ 9500 E | Lawter | Eco-Rez™ 9500 E is a high soluble and low viscous rosin resin that has good grinding properties, is free of phenols and formaldehyde and displays low yellowing and odor. The product provides the ability to ensure a greener outcome in terms of environmenta...もっと表示する Eco-Rez™ 9500 E is a high soluble and low viscous rosin resin that has good grinding properties, is free of phenols and formaldehyde and displays low yellowing and odor. The product provides the ability to ensure a greener outcome in terms of environmental sustainability. It is used in grinding varnishes, web offsets and low odor inks. 表示を減らす | |
| Eco-Rez™ 9520 E | Lawter | Eco-Rez™ 9520 E is a rosin resin with a medium solubility and medium viscosity in a vegetable oil. It has low tack, low yellowing and odor, is free of phenols and formaldehyde and has good gel and anti-misting properties. The product provides a greener al...もっと表示する Eco-Rez™ 9520 E is a rosin resin with a medium solubility and medium viscosity in a vegetable oil. It has low tack, low yellowing and odor, is free of phenols and formaldehyde and has good gel and anti-misting properties. The product provides a greener alternative and can be used in offsets, let down varnishes and low odor inks. 表示を減らす | |
| Eco-Set™ 4002 E | Lawter | Eco-Set™ 4002 E is a grinding varnish with a phenol-free rosin that provides sustainable options in chemistry formulation. It has good tack stability, low tack inks, is fast setting with good lithographic and anti-misting properties. The product has uses ...もっと表示する Eco-Set™ 4002 E is a grinding varnish with a phenol-free rosin that provides sustainable options in chemistry formulation. It has good tack stability, low tack inks, is fast setting with good lithographic and anti-misting properties. The product has uses in sheet-fed and high speed presses. 表示を減らす | |
| Eco-Set™ 4025 E | Lawter | Eco-Set™ 4025 E is a non-VOC grinding varnish that is free of phenols, offering a renewable source of application in chemistry formulations. It displays good lithographic behavior with good anti-misting properties. It is also fast setting with lower tack ...もっと表示する Eco-Set™ 4025 E is a non-VOC grinding varnish that is free of phenols, offering a renewable source of application in chemistry formulations. It displays good lithographic behavior with good anti-misting properties. It is also fast setting with lower tack inks that are suitable for use in sheet-fed and high speed presses. 表示を減らす | |
| Eco-Set™ 4300 E | Lawter | Eco-Set™ 4300 E is a gel varnish with phenol-free rosins and mineral distillates that show good tack stability, displays ideal lithographic behavior, is fast setting and has good anti-misting qualities. The product has uses in sheet-fed and high speed pre...もっと表示する Eco-Set™ 4300 E is a gel varnish with phenol-free rosins and mineral distillates that show good tack stability, displays ideal lithographic behavior, is fast setting and has good anti-misting qualities. The product has uses in sheet-fed and high speed presses. 表示を減らす | |
| Eco-Set™ 4330 E | Lawter | Eco-Set™ 4330 E is a gel varnish that is 100% non-VOC and is based on phenol-free rosins which provide a sustainable alternative in chemistry formulations. It shows good tack stability, is fast setting with anti-misting properties and has good lithographi...もっと表示する Eco-Set™ 4330 E is a gel varnish that is 100% non-VOC and is based on phenol-free rosins which provide a sustainable alternative in chemistry formulations. It shows good tack stability, is fast setting with anti-misting properties and has good lithographic behavior. The product is used in sheet-fed inks and high speed presses. 表示を減らす | |
| Erkazit™ 4902 E | Lawter | Erkazit™ 4902 E is a phenolic modified rosin-based resinate that is used as a grinding resin in publication gravure inks. It has good pigment wetting and fast drying properties, with medium viscosity, fast solvent release and good block resistance as adde...もっと表示する Erkazit™ 4902 E is a phenolic modified rosin-based resinate that is used as a grinding resin in publication gravure inks. It has good pigment wetting and fast drying properties, with medium viscosity, fast solvent release and good block resistance as added features. Apart from publication gravure uses, the product can also be used in grinding varnishes. 表示を減らす | |
| Erkazit™ 4905 E | Lawter | Erkazit™ 4905 E is a phenolic modified rosin-based resinate designed for pigment grinding in the manufacture of blue, yellow and red inks. It offers good pigment wetting, fast drying and quick solvent release features in various applications including pub...もっと表示する Erkazit™ 4905 E is a phenolic modified rosin-based resinate designed for pigment grinding in the manufacture of blue, yellow and red inks. It offers good pigment wetting, fast drying and quick solvent release features in various applications including publication gravure and grinding varnishes. 表示を減らす | |
| Erkazit™ 4908 E | Lawter | Erkazit™ 4908 E is a metallized phenolic modified rosin-based resinate that offers good pigment wetting and fast drying behavior while showing good solubility in inks and varnishes. It also has a low viscosity which helps it to be ideally suited for use i...もっと表示する Erkazit™ 4908 E is a metallized phenolic modified rosin-based resinate that offers good pigment wetting and fast drying behavior while showing good solubility in inks and varnishes. It also has a low viscosity which helps it to be ideally suited for use in publication gravure and grinding varnishes. 表示を減らす | |
| Erkazit™ 7861 E | Lawter | Erkazit™ 7861 E is a phenolic modified rosin resin that has a low pigment and resin content, while offering good printing properties. It has high durability and is ideally used in publication gravure and let down varnishes. | |
| Estergum-751 | D.S.V. Chemicals Pvt. Ltd. | Estergum-751 is an esterified rosin derivative. This product derives from penta polyols. It can be used in primers, undercoats, adhesives, and nitrocellulose lacquers. | |
| Estergum-752 | D.S.V. Chemicals Pvt. Ltd. | Estergum-752 is an esterified rosin derivative. This product derives from glycerine polyols. It can be used in adhesives and wax systems in hot melt adhesives. Estergum-752 is compatible with vinyl copolymers that are used in synthetic floor tile adhes...もっと表示する Estergum-752 is an esterified rosin derivative. This product derives from glycerine polyols. It can be used in adhesives and wax systems in hot melt adhesives. Estergum-752 is compatible with vinyl copolymers that are used in synthetic floor tile adhesives. 表示を減らす | |
| Flytac 102-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...もっと表示する Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. 表示を減らす | |
| Flytac 103-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for thi...もっと表示する Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for this product include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It an also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. Flytac 103-E has a softening point (R&B) of 82-90°C min., an acid value of 3-8mg KOH/g max., and a colour gardener (in 50% Toluene) of 8 max. 表示を減らす | |
| Flytac 105-L | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In...もっと表示する Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. Flytac105-L has a softening point (R&B) of 85°C, an acid value of 9mg KOH/g max., and an ash content of 0.2% max. 表示を減らす | |
| Flytac 106-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesiv...もっと表示する Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. Flytac 106-100 has a color gardener of 8~10, a specific gravity (25°C/25°C) of 1.060~1.090, and a softening point (R&B) of 95-102°C min. 表示を減らす | |
| Flytac 106-100L | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesi...もっと表示する Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. This product has a color gardener of 4~6, a softening point (R&B) of 95-102°C, and a specific gravity (25°C/25°C) of 1.060~1.090. 表示を減らす | |
| Flytac 107 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important com...もっと表示する Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important component for making potassium soaps. This product has a dehydrated acid content of 52.0% min., an unsaponifiable material of 10.0% max., and an abietic acid of 1% max. 表示を減らす | |
| Flytac 111-101 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...もっと表示する Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-101 has a tetrahydro resin acid of 10.0% min., an abietic acid of 2.0% max., and a dehydroabietic acid of 10.0% max. 表示を減らす | |
| Flytac 111-301 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...もっと表示する Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-301 has an abietic acid of 0-0.1% max., a softening point (R&B) of 78°C, and a tetrahydro resin acid level of 30.0-40.0%. 表示を減らす | |
| Flytac 115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...もっと表示する Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. 表示を減らす | |
| Flytac 116-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg K...もっと表示する Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg KOH/g, a softening point (R&B) of 110± 5°C, and a color gardner (50% Benzene solution) of 5 max. 表示を減らす | |
| Flytac 116-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180...もっと表示する Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180 ± 10mg KOH/g, a softening point (R&B) of 130 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. 表示を減らす | |
| Flytac 116-150 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg ...もっと表示する Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg KOH/g, a softening point (R&B) of 150 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. 表示を減らす | |
| Flytac 116-160 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg ...もっと表示する Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg KOH/g, a softening point (R&B) of 160 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. 表示を減らす | |
| Flytac 197-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-100 has a softening point (R&B) of 100 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...もっと表示する Flytac 197-100 has a softening point (R&B) of 100 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made especially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. It has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. 表示を減らす | |
| Flytac 197-105 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-105 has a softening point (R&B) of 105 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...もっと表示する Flytac 197-105 has a softening point (R&B) of 105 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. It has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. 表示を減らす | |
| Flytac 197-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-110 has a softening point (R&B) of 110 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...もっと表示する Flytac 197-110 has a softening point (R&B) of 110 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. This product has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. 表示を減らす | |
| Flytac 197-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-95 has a softening point (R&B) of 95 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceed...もっと表示する Flytac 197-95 has a softening point (R&B) of 95 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. This product also has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. 表示を減らす | |
| Flytac102-100F | Guangzhou Flying Dragon Chemical Ltd. | Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...もっと表示する Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, Pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR.This product has a melt viscosity (CPS at 150°C) of 850-1300, a softening point (R&B) of 97-103°C, and a specific gravity (25°C/25°C) of 1.060~1.090. 表示を減らす | |
| Flytac103-90 | Guangzhou Flying Dragon Chemical Ltd. | Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses...もっと表示する Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. This product has a colour gardener (in 50% Toleune) of 3 max., an acid value of 10mg KOH/g max., and a softening point (R&B) of 87-92°C min. 表示を減らす | |
| Flytac105-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-ox...もっと表示する Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. This product is ideally used for wax modification, waterborne adhesives, tapes and labels, solventborne adhesives, rubber and plastic modification, and paint and coatings. Flytac105-E has a softening point (R&B) of 78-88°C min., a specific gravity (25°C/25°C) of 1.060~1.090, and an ash content of 0.1% max. 表示を減らす | |
| Glycerol Ester of Gum Rosin | Qingdao Sun Chemical Corporation Limited | Glycerol Ester of Gum Roson is an organic compound made by high-quality pinus massoniana rosin and glycerol. It’s a natural tackily resin which has excellent performance and, after the intensive processing (esterification, decolorization,stabilization tre...もっと表示する Glycerol Ester of Gum Roson is an organic compound made by high-quality pinus massoniana rosin and glycerol. It’s a natural tackily resin which has excellent performance and, after the intensive processing (esterification, decolorization,stabilization treatment,etc.), has merits such as light color and low odor. It is ideal for paint, hot melt, as well as pressure sensitive adhesives and coatings. This product has a softening point of 85 ± 2°C, an acid value of 7mg KOH/g, and an ash content of < 0.01%. 表示を減らす | |
| GLYCEROL ESTER OF GUM ROSIN 85 (PM-003) | PT. NASCO | GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture variou...もっと表示する GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture various adhesives, and primarily as a tackifier in hot melt adhesives (HMA). It has little odor and is light in color. 表示を減らす | |
| Glycerol Ester of Gum Rosin G-85 | Ecopower Chemical Co., Ltd. | Glycerol Ester of Gum Rosin G-85 is a gum rosin derivative used in ester glue phenolic resin paints and as an enhancer for hot-melt adhesives and pressure-sensitive adhesives. | |
| Glycerol Ester of Gum Rosin G-90 | Ecopower Chemical Co., Ltd. | Glycerol Ester of Gum Rosin G-90 is a gum rosin derivative used in ester glue phenolic resin paints and as an enhancer for hot-melt adhesives and pressure-sensitive adhesives. | |
| Glycerol Ester of Gum Rosin G-90L | Ecopower Chemical Co., Ltd. | Glycerol Ester of Gum Rosin G-90L is a gum rosin derivative used in ester glue phenolic resin paints and as an enhancer for hot-melt adhesives and pressure-sensitive adhesives. | |
| Gum Rosin | LUKEM D.O.O. | Gum Rosin is a light yellow, transparent solid with a softening point of 76ºC. This product is used as a raw material in coatings and synthetic resins. | |
| GUM ROSIN INDONESIAN (PM-002) | PT. NASCO | GUM ROSIN INDONESIAN is made up of various resin acids such as Abietic, Palustric, Isopimaric, Mercusic Acids. | |
| Gum Rosin WG | SWISLOYD LIMITED | Gum Rosin WG is a yellow solid resin that has a softening point at 75°C with an acid value of 165 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents...もっと表示する Gum Rosin WG is a yellow solid resin that has a softening point at 75°C with an acid value of 165 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. 表示を減らす | |
| Gum Rosin WW | SWISLOYD LIMITED | Gum Rosin WW is a light yellow solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic so...もっと表示する Gum Rosin WW is a light yellow solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. 表示を減らす | |
| Gum Rosin, WW-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, WW-Grade, in the form of a pale yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. | |
| Gum Rosin [WW/WG Grade] | Industrial Oleochemical Products | Gum Rosin [WW/WG Grade] is a standard grade gum rosin in a nugget-sized particle form. This product is most commonly used in hot-melt and pressure-sensitive adhesive applications. | |
| Gum Rosin X | SWISLOYD LIMITED | Gum Rosin X is a pale yellow transparent solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many ...もっと表示する Gum Rosin X is a pale yellow transparent solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. 表示を減らす | |
| Gum Rosin, X-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents...もっと表示する Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. 表示を減らす | |
| HE100 | Tianyi Chemical Engineering Material Co., Ltd. | HE100, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or S...もっと表示する HE100, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. 表示を減らす | |
| HE105 | Tianyi Chemical Engineering Material Co., Ltd. | HE105, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or S...もっと表示する HE105, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. 表示を減らす | |
| HE85 | Tianyi Chemical Engineering Material Co., Ltd. | HE85, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. Thi...もっと表示する HE85, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. 表示を減らす | |
| HE90 | Tianyi Chemical Engineering Material Co., Ltd. | HE90, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. Thi...もっと表示する HE90, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. 表示を減らす | |
| HE95 | Tianyi Chemical Engineering Material Co., Ltd. | HE95, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SB...もっと表示する HE95, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. 表示を減らす | |
| HR100 | Tianyi Chemical Engineering Material Co., Ltd. | HR100, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...もっと表示する HR100, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. 表示を減らす | |
| HR100A | Tianyi Chemical Engineering Material Co., Ltd. | HR100A, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowin...もっと表示する HR100A, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. 表示を減らす | |
| HR100B | Tianyi Chemical Engineering Material Co., Ltd. | HR100B, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowin...もっと表示する HR100B, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. 表示を減らす | |
| HR105 | Tianyi Chemical Engineering Material Co., Ltd. | HR105, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...もっと表示する HR105, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. 表示を減らす | |
| HR110 | Tianyi Chemical Engineering Material Co., Ltd. | HR110, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...もっと表示する HR110, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging 表示を減らす |
