| 12-Hydroxy Stearic Acid (12-HSA) | Castor International BV | 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting...もっと表示する 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting polymers used as a coating in metal decorative finishes, industrial appliance, and high quality automotive, and is a useful component in hot-melt adhesives, inks, and polishes. 表示を減らす | |
| Blown Castor Oil (BCO) | Castor International BV | Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There...もっと表示する Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There are numerous applications in various industrial segments, such as adhesives (hot-melt and solution): plasticizer and coupling solvent for resins and modifiers; inks: resin and binder plasticizer, medium for dispersion of pigments and dyes; sealants and caulks: flexibility, penetration, adhesion. 表示を減らす | |
| Castor Oil | Castor International BV | Castor Oil, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor and is pale-yellowish or almost colorless. There are numerous applications in various industrial s...もっと表示する Castor Oil, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor and is pale-yellowish or almost colorless. There are numerous applications in various industrial segments, because of its unique molecule structure, such as lubricants in hydraulic fluids and 2 stroke engines, polyurethane in PU floor coatings, PU adhesives/sealants and PU foams, adhesives in hot-melts, and more. 表示を減らす | |
| Castor Oil FSG Low Acid Value | Castor International BV | Castor Oil FSG Low Acid Value, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/...もっと表示する Castor Oil FSG Low Acid Value, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/g max. There are numerous applications in various industrial segments, because of its unique molecule structure, such as polyurethane in PU floor coatings, PU adhesives/sealants and PU foams. 表示を減らす | |
| Castor Oil FSG Low Water Content | Castor International BV | Castor Oil FSG Low Water Content, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg K...もっと表示する Castor Oil FSG Low Water Content, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/g max. There are numerous applications in various industrial segments, because of its unique molecule structure, such as polyurethane in PU floor coatings, PU adhesives/sealants and PU foams. 表示を減らす | |
| Castor Polyol (Type 114) | Castor International BV | Castor Polyol (Type 114) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1145. It is for use in vari...もっと表示する Castor Polyol (Type 114) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1145. It is for use in various fillers, like silicates, quartz, calcium carbonate and barites, additives and pigments as a leveling aids and defoamers and it may be added to such formulations for preparing coatings, adhesives, floor coatings, electrical casting applications, and sealants. 表示を減らす | |
| Castor Polyol (Type 115) | Castor International BV | Castor Polyol (Type 115) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of 1.000 ± 0.00 (25°C) and is developed as an alternative for Desmophen-1150. It is cured with MDI and th...もっと表示する Castor Polyol (Type 115) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of 1.000 ± 0.00 (25°C) and is developed as an alternative for Desmophen-1150. It is cured with MDI and the nature and addition of additives and fillers may vary depending on the particular formulation for making: adhesives, coatings, floorings, and electrical casting applications. 表示を減らす | |
| Castor Polyol (Type 116) | Castor International BV | Castor Polyol (Type 116) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1155. It can be cured with ...もっと表示する Castor Polyol (Type 116) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1155. It can be cured with MDI and its variants or by aliphatic isocyanates like HDI, in combination with castor polyol types 114 and 115. Castor Polyol (Type 116) has many applications, for instance: in various fillers, like silicates, quartz, calcium carbonate, and barites: in additives and pigments, like leveling aids and defoamers: and may be added to such formulations for preparing coatings, adhesives, floor coatings, electrical casting applications, and sealants. 表示を減らす | |
| Castor Thickener (Blend) | Castor International BV | Castor Thickener (Blend) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Blend) has advantages in improved storage ...もっと表示する Castor Thickener (Blend) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Blend) has advantages in improved storage stability and leveling, no hard settling of pigments, and provides sag control. Other applications are in adhesives, sealants, alkyd resins, and 2K PU systems. Castor Thickener (Blend) has a melting point of 136°C to 140°C, a saponification value of 130 to 138 mg KOH/g, and an acid value of 6 mg KOH/g max. 表示を減らす | |
| Castor Thickener (Pure) | Castor International BV | Castor Thickener (Pure) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Pure) has advantages in improved storage st...もっと表示する Castor Thickener (Pure) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Pure) has advantages in improved storage stability and leveling, no hard settling of pigments, and provides sag control. Other applications are in adhesives, sealants, alkyd resins, and 2K PU systems. Castor Thickener (Pure) has a melting point of 82°C to 88°C, a saponification value of 177 to 182 mg KOH/g, and an acid value of 4 mg KOH/g max. 表示を減らす | |
| Dehydrated Castor Oil (DCO), Commercial Grade | Castor International BV | Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal...もっと表示する Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Commercial Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 6 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 表示を減らす | |
| Dehydrated Castor Oil (DCO), Pale Grade | Castor International BV | Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxide...もっと表示する Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Pale Grade has a characteristic odor and is a yellow oily liquid. It has a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 表示を減らす | |
| Dehydrated Castor Oil (DCO), Special Grade | Castor International BV | Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal ox...もっと表示する Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Special Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 4 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. 表示を減らす | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), High | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spe...もっと表示する Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 表示を減らす | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Low | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectr...もっと表示する Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 表示を減らす | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Medium | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spe...もっと表示する Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. 表示を減らす | |
| Drying additive 3A (Paste 50) | Castor International BV | Drying additive 3A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption of 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane form...もっと表示する Drying additive 3A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption of 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. 表示を減らす | |
| Drying additive 3A (Paste 60) | Castor International BV | Drying additive 3A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption of 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane form...もっと表示する Drying additive 3A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption of 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. 表示を減らす | |
| Drying additive 3A (Powder) | Castor International BV | Drying additive 3A (Powder), centered on a zeolite-mineral, is a bright powder with a water absorption of 22% to 23%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethan...もっと表示する Drying additive 3A (Powder), centered on a zeolite-mineral, is a bright powder with a water absorption of 22% to 23%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. 表示を減らす | |
| Drying additive 4A (Paste 50) | Castor International BV | Drying additive 4A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyure...もっと表示する Drying additive 4A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. 表示を減らす | |
| Drying additive 4A (Paste 60) | Castor International BV | Drying additive 4A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyure...もっと表示する Drying additive 4A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. 表示を減らす | |
| Drying additive 4A (Powder) | Castor International BV | Drying additive 4A (Powder), centered on a zeolite-mineral, is a bright paste with a water absorption of approximately 28%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyu...もっと表示する Drying additive 4A (Powder), centered on a zeolite-mineral, is a bright paste with a water absorption of approximately 28%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. 表示を減らす | |
| DYFLEX® LP 1225 | EPS Materials | DYFLEX® LP 1225 is a binder for interior and exterior wood applications such as transparent lazures, enamels and varnishes with exceptional leveling properties and UV resistance. Excellent in-can transparency is a key feature of the product. | |
| DYFLEX® LP 1500 | EPS Materials | DYFLEX® LP 1500 is a fine particle size, water based, self-crosslinking all-acrylic copolymer dispersion with fast hardness development, excellent block and chemical resistance. | |
| DYFLEX® LP 1700 | EPS Materials | DYFLEX® LP 1700 is a clear in can, self-crosslinking all- acrylic polymer used as the principal vehicle for high performance furniture and wood finishes. | |
| DYFLEX® LP 2809 | EPS Materials | DYFLEX® LP 2809 is a self-crosslinking water based, pure acrylic-copolymer emulsion binder for interior and outdoor applications. | |
| DYFLEX® LP 2945 | EPS Materials | DYFLEX® LP 2945 is a self-crosslinking all-acrylic copolymer, used as a binder for exterior applications. Primers based on DYFLEX® LP 2945 will pass the DUTCH BRL 0817 tests. | |
| DYFLEX® LP 9624 | EPS Materials | DYFLEX® LP 9624 is an acrylic copolymer emulsion to be used for water-based paints on metal, MDF and plastic. It is used as a binder for metal finishes, anticorrosive primers, brushable paints, primers for MDF and plastic coatings. | |
| DYFLEX® LP 9714/10 | EPS Materials | DYFLEX® LP 9714/10 is a water based, pure acrylic surfactant free copolymer emulsion for high performance furniture and wood finishes. | |
| EPS® 2103 | EPS Materials | EPS® 2103 is an excellent choice to use as a modifier/additive for cementitious base coats and as the binder for finish coats for EIFS (exterior insulated finishing system) applications. For concrete admixture applications, EPS® 2103 imparts increased fle...もっと表示する EPS® 2103 is an excellent choice to use as a modifier/additive for cementitious base coats and as the binder for finish coats for EIFS (exterior insulated finishing system) applications. For concrete admixture applications, EPS® 2103 imparts increased flexibility and decreased permeability to the system. 表示を減らす | |
| EPS® 294 | EPS Materials | EPS® 294 is a self-crosslinking acrylic emulsion used to formulate varnishes and paints for horizontal and vertical applications on cementitious and tile substrates, such as garage floors, balconies and walkways. Also suitable for exterior wood stains. | |
| EPS® 506 | EPS Materials | EPS® 506 is an acrylic copolymer recommended for primers and basecoats on tiles and other mineral substrates. | |
| EPS® 515 | EPS Materials | EPS® 515 is a hydrophobically modified acryliccopolymer used to formulate protective metal lacquers and enamels with excellent gloss potential. This product also offers good adhesion on wood and mineral substrates. | |
| EPS® 533 | EPS Materials | EPS® 533 is a versatile, acrylic copolymer in water, offering outstanding tannin and stain blocking characteristics, with excellent adhesion to multiple substrates, and low water uptake. | |
| EPS® 541 | EPS Materials | EPS® 541 is a versatile and robust acrylic copolymer in water, offering excellent corrosion resistance, early water resistance, and adhesion to multiple substrates. It has excellent gloss potential and retention, as well as excellent block resistance and...もっと表示する EPS® 541 is a versatile and robust acrylic copolymer in water, offering excellent corrosion resistance, early water resistance, and adhesion to multiple substrates. It has excellent gloss potential and retention, as well as excellent block resistance and exterior durability. It also has exceptional resistance to dirt pickup, and chemical and corrosion resistance. Common applications include primers and topcoats. 表示を減らす | |
| EPS® 546 | EPS Materials | EPS® 546 is an alkali strippable acrylic co-polymer dispersion ideal for applications such as wood wiping stains, temporary protection of metal and shade protection for greenhouses. Also used as a co-binder to extend open time. | |
| EPS® 572 | EPS Materials | EPS® 572 is a self-crosslinking acrylic copolymer recommended for the formulation of mosaic plasters, enamels for wood, metal and mineral substrates, varnishes and stains. | |
| EPS® 595 | EPS Materials | EPS® 595 is a versatile and robust APEO free acrylic copolymer in water, offering exceptional corrosion resistance and adhesion (wet and dry) to multiple substrates. | |
| EPS® 700 | EPS Materials | EPS® 700 is a general-purpose architectural binder for both matt and sheen paints for interior and exterior applications. | |
| EPS® 717 | EPS Materials | EPS® 717 is a high solids all-acrylic copolymer ideal for use in exterior coatings and plasters, road line and tennis court marking. | |
| EPS® 719 | EPS Materials | EPS® 719 is designed to minimize asphalt bleed through in cool roof coatings while maintaining flexibility and toughness. It has excellent exterior durability, as well as exceptional resistance to dirt pickup, water resistance, and adhesion to asphalt, PV...もっと表示する EPS® 719 is designed to minimize asphalt bleed through in cool roof coatings while maintaining flexibility and toughness. It has excellent exterior durability, as well as exceptional resistance to dirt pickup, water resistance, and adhesion to asphalt, PVC, metal, and other common roofing substrates. Common applications include basecoats and topcoats. 表示を減らす | |
| EPS® 730 | EPS Materials | EPS® 730 is an ultrafine particle size, surfactant stabilized, acrylic copolymer for stabilizing powdery cementitious substrates. | |
| EPS® 745 | EPS Materials | EPS® 745 is a self-crosslinking all-acrylic copolymer recommended for exterior varnishes and lazures. ADH free. | |
| EPS® 747 | EPS Materials | EPS® 747 is an ADH-free, self-crosslinking acrylic copolymer for interior and exterior applications recommended to formulate trim paints and multipurpose lacquers. | |
| EXP-EPS® 706 | EPS Materials | EXP-EPS® 706 is used as the principal vehicle for medium to high PVC coating for mineral and wood substrates. Designed for interior/exterior architectural coatings. | |
| Forton® VF 774 AF | EPS Materials | Forton® VF 774 is an all acrylic, co-polymer dispersion specifically formulated for the Glass Fiber Reinforced Concrete (GFRC) production process as well as for concrete and concrete repair products. VF-774 is UV stable and is further formulated to be sta...もっと表示する Forton® VF 774 is an all acrylic, co-polymer dispersion specifically formulated for the Glass Fiber Reinforced Concrete (GFRC) production process as well as for concrete and concrete repair products. VF-774 is UV stable and is further formulated to be stable and durable in the high pH Portland cement-based GFRC composite. 表示を減らす | |
| Hydrogenated Castor Oil (HCO) | Castor International BV | Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applicat...もっと表示する Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applications in various industrial segments, such as a slip additive in paints, plastics (PE), and inks and as a dispersing agent in carbon papers, inks, and plastic color master batches and as a dispersing additive and flow control in sealants, hot-melt adhesives, powder coatings, and more. 表示を減らす | |
| MDI CI 15/10000 | Castor International BV | MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solven...もっと表示する MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 15/10000 has an approximate equivalent weight of 280 g/mol with a viscosity of 10000 mPa.s at 23°C. 表示を減らす | |
| MDI CI 16/1800 | Castor International BV | MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...もっと表示する MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 16/1800 has an approximate equivalent weight of 262 g/mol with a viscosity of 1800 mPa.s at 23°C. 表示を減らす | |
| MDI CI 22/1500 | Castor International BV | MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...もっと表示する MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 22/1500 has an approximate equivalent weight of 191 g/mol with a viscosity of 1500 mPa.s at 23°C. 表示を減らす | |
| MDI CI 25/1200 | Castor International BV | MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...もっと表示する MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 25/1200 has an approximate equivalent weight of 168 g/mol with a viscosity of 1200 mPa.s at 23°C. 表示を減らす | |
| MDI CI 32/120 | Castor International BV | MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...もっと表示する MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/120 has an approximate equivalent weight of 126 g/mol with a viscosity of 120 mPa.s at 23°C. 表示を減らす | |
| MDI CI 32/200 | Castor International BV | MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...もっと表示する MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/200 has an approximate equivalent weight of 125 g/mol with a viscosity of 200 mPa.s at 23°C. 表示を減らす | |
| MDI CI 32/40 | Castor International BV | MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-f...もっと表示する MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/40 has an approximate equivalent weight of 129 g/mol with a viscosity of 40 mPa.s at 23°C. 表示を減らす | |
| NovoColor® HP II | EPS Materials | NovoColor® HP II is the next generation of waterborne pigment dispersions specifically engineered for use in decorative and waterborne industrial coatings systems to help formulators meet stringent VOC restrictions. Designed for point of sale applications...もっと表示する NovoColor® HP II is the next generation of waterborne pigment dispersions specifically engineered for use in decorative and waterborne industrial coatings systems to help formulators meet stringent VOC restrictions. Designed for point of sale applications. 表示を減らす | |
| NovoColor® II | EPS Materials | NovoColor® II is a low VOC universal colorant designed for point of sales usage in decorative and light industrial coatings. Formulated without APEO or ethylene and propylene glycols. | |
| NovoColor® IP | EPS Materials | NovoColor® IP is a broadly compatibile, in-plant colorant for waterborne decorative and industrial coating applications. Non-VOC and formulated without APEO or ethylene and propylene glycols. | |
| NovoColor® SF | EPS Materials | NovoColor® SF waterborne dispersions are designed for in-plant tinting of coatings and stains where a high degree of color transparency is desired. Composed of high quality, lightfast pigments, it offers excellent color stability and uniformity. These col...もっと表示する NovoColor® SF waterborne dispersions are designed for in-plant tinting of coatings and stains where a high degree of color transparency is desired. Composed of high quality, lightfast pigments, it offers excellent color stability and uniformity. These colorants are controlled to very stringent color and opacity standards, and give the user batch to batch appearance uniformity. 表示を減らす | |
| OptiColor® XP | EPS Materials | OptiColor® XP are high performance, industrial colorants for point of sales and in-plant solventborne coating systems. | |
| Partially Dehydrated Castor Oil | Castor International BV | Partially Dehydrated Castor Oil is created when part of the chemically combined water, has been removed. Heating the oil in the presence of catalysts such as clay's and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out....もっと表示する Partially Dehydrated Castor Oil is created when part of the chemically combined water, has been removed. Heating the oil in the presence of catalysts such as clay's and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Partially Dehydrated Castor Oil has a characteristic odor and is a yellow oily liquid. It has an acid value of 5 mg KOH/g max and can be used as a hydrophobic and plasticizer component in paints, coatings, and moldings. 表示を減らす | |
| PC-Mull® 1015/1 | EPS Materials | PC-Mull® 1015/1 is a fast-drying all-acrylic copolymer dispersion used as a binder for high quality wood coatings. | |
| PC-Mull® 1016 | EPS Materials | PC-Mull® 1016 is a self-crosslinking all-acrylic copolymer used as binder for high quality furniture coatings | |
| PC-Mull® 1016W | EPS Materials | PC-Mull® 1016W is a sefl-crosslkinking all-acrylic resin used as the principal vehicle for high performance furniture and wood finishes. | |
| PC-Mull® 1024 | EPS Materials | PC-Mull® 1024 is a self-crosslinking acrylic copolymer used as binder for furniture and parquet coatings. Excellent appearance on oak. | |
| PC-Mull® GR 100 | EPS Materials | PC-Mull® GR 100 has been specifically designed as a wetting and dispersing resin for aqueous systems. PC-Mull® GR 100 is recommended to be used in combination with PC-Mull® VP 435 and EPS® 595 for high performance furniture and wood finishes where IKEA R2...もっと表示する PC-Mull® GR 100 has been specifically designed as a wetting and dispersing resin for aqueous systems. PC-Mull® GR 100 is recommended to be used in combination with PC-Mull® VP 435 and EPS® 595 for high performance furniture and wood finishes where IKEA R2 (coffee and ethanol) performance is required. Exceptional wetting of substrate, pigments and binders without compromising coating performance. 表示を減らす | |
| PC-Mull® VP 209 | EPS Materials | PC-Mull® VP 209 is a self-crosslinking acrylic copolymer used as binder for furniture coatings. | |
| PC-Mull® VP 433 | EPS Materials | PC-Mull® VP 433 is a self-crosslinking all-acrylic copolymer used as binder for high quality wood coatings. Excellent appearance on oak. | |
| PC-Mull® VP 435 | EPS Materials | PC-Mull® VP 435 is used as is used as the principal vehicle for pigmented high-performance furniture and wood finishes where IKEA R2 (coffee and ethanol) performance is required. | |
| PEG-25-CO | Castor International BV | PEG-25-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25-CO has a HLB ...もっと表示する PEG-25-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25-CO has a HLB of approximately 11, a saponification value of 70 to 90, and an iodine value of 30 to 50. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. 表示を減らす | |
| PEG-25-HCO | Castor International BV | PEG-25-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25...もっと表示する PEG-25-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25-HCO has a HLB of approximately 11 and a saponification value of 70 to 90. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. 表示を減らす | |
| PEG-40-CO | Castor International BV | PEG-40-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40-CO has a HLB ...もっと表示する PEG-40-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40-CO has a HLB of approximately 14, a saponification value of 45 to 69, and an iodine value of 20 to 35. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. 表示を減らす | |
| PEG-40-HCO | Castor International BV | PEG-40-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40...もっと表示する PEG-40-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40-HCO has a HLB of approximately 14 and a saponification value of 45 to 69. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. 表示を減らす | |
| PEG-60-CO | Castor International BV | PEG-60-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60-CO has a HLB ...もっと表示する PEG-60-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60-CO has a HLB of approximately 16, a saponification value of 40 to 51, and an iodine value of 15 to 30. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. 表示を減らす | |
| PEG-60-HCO | Castor International BV | PEG-60-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60...もっと表示する PEG-60-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60-HCO has a HLB of approximately 16 and a saponification value of 40 to 51. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. 表示を減らす | |
| PEG-7-CO | Castor International BV | PEG-7-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-CO has a HLB of...もっと表示する PEG-7-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-CO has a HLB of approximately 5, a saponification value of 125 to 140, and an iodine value of 55 to 75. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. 表示を減らす | |
| PEG-7-HCO | Castor International BV | PEG-7-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-H...もっと表示する PEG-7-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-HCO has a HLB of approximately 5 and a saponification value of 125 to 140. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. 表示を減らす | |
| Polyol CI 1200/10 | Castor International BV | Polyol CI 1200/10, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1300 mPa.s, and is harmless. Polyol CI 1200/10 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, ...もっと表示する Polyol CI 1200/10, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1300 mPa.s, and is harmless. Polyol CI 1200/10 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. 表示を減らす | |
| Polyol CI 1200/1200 | Castor International BV | Polyol CI 1200/1200, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 500 mPa.s, and is harmless. Polyol CI 1200/1200 is used for adhesives, coatings, polyurethane cast moldings in combination with TD...もっと表示する Polyol CI 1200/1200, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 500 mPa.s, and is harmless. Polyol CI 1200/1200 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. 表示を減らす | |
| Polyol CI 1200/240 | Castor International BV | Polyol CI 1200/240, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1050 mPa.s, and is harmless. Polyol CI 1200/240 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI...もっと表示する Polyol CI 1200/240, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1050 mPa.s, and is harmless. Polyol CI 1200/240 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. 表示を減らす | |
| Polyol CI 1200/3600 | Castor International BV | Polyol CI 1200/3600, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 350 mPa.s, and is harmless. Polyol CI 1200/3600 is used for adhesives, coatings, polyurethane cast moldings in combination with TD...もっと表示する Polyol CI 1200/3600, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 350 mPa.s, and is harmless. Polyol CI 1200/3600 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. 表示を減らす | |
| Polyol CI 1200/400 | Castor International BV | Polyol CI 1200/400, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 750 mPa.s, and is harmless. Polyol CI 1200/400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI,...もっと表示する Polyol CI 1200/400, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 750 mPa.s, and is harmless. Polyol CI 1200/400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. 表示を減らす | |
| Polyol CI 29/825 | Castor International BV | Polyol CI 29/825, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 825 mPa.s, and is harmless. Polyol CI 29/825 is used for adhesives, sealants, coatings, polyurethane moldings (...もっと表示する Polyol CI 29/825, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 825 mPa.s, and is harmless. Polyol CI 29/825 is used for adhesives, sealants, coatings, polyurethane moldings (CASE applications) in combination with TDI, IPDI, HDI, and MDI. 表示を減らす | |
| Polyol CI 400/400 | Castor International BV | Polyol CI 400/400, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 400 mPa.s, and is harmless. Polyol CI 400/400 is used for adhesives, coatings, polyurethane moldings (CASE app...もっと表示する Polyol CI 400/400, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 400 mPa.s, and is harmless. Polyol CI 400/400 is used for adhesives, coatings, polyurethane moldings (CASE applications) in combination with TDI, IPDI, HDI, and MDI. 表示を減らす | |
| Polyol CI 55/375 | Castor International BV | Polyol CI 55/375, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 375 mPa.s, and is harmless. Polyol CI 55/375 is used for adhesives, coatings, polyurethane moldings (CASE appli...もっと表示する Polyol CI 55/375, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 375 mPa.s, and is harmless. Polyol CI 55/375 is used for adhesives, coatings, polyurethane moldings (CASE applications) in combination with TDI, IPDI, HDI, and MDI. 表示を減らす | |
| Polyol CI T-400 | Castor International BV | Polyol CI T-400, a hydrolysis resistant, hydrophobic polyether triol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI T-400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, ...もっと表示する Polyol CI T-400, a hydrolysis resistant, hydrophobic polyether triol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI T-400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. 表示を減らす | |
| Polyol CI X-630/1000 | Castor International BV | Polyol CI X-630/1000, a hydrolysis resistant, hydrophobic tetrafunctional polyether polyol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI X-630/1000 is used for adhesives, coatings, polyurethane cast moldings in combin...もっと表示する Polyol CI X-630/1000, a hydrolysis resistant, hydrophobic tetrafunctional polyether polyol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI X-630/1000 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. 表示を減らす | |
| Ricinoleic Acid (RA) | Castor International BV | Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal ...もっと表示する Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal working fluids, cutting oils, emulsifiers, and industrial lubricants; Surface coating: used as a pigment/dye dispersants in plastics, inks, coatings, etc.; Textiles: providing surface wetting and lubricity, and polarity. 表示を減らす | |
| Sulphonated Castor Oil (SCO) | Castor International BV | Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling ag...もっと表示する Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling agent. Sulphonated Castor Oil (SCO) is used as a dispersion and pigment wetting application in the paint industry, and as leveling and dye dispersion in the inks industry, among others. 表示を減らす | |
| T-DYFLEX® LP 9607/2 | EPS Materials | T-DYFLEX® LP 9607/2 is a hydroxy functional acrylic copolymer dispersion, used as a binder together with either blocked isocyanate or amino resin for 2K water based stoveable paints for glass. ...もっと表示する T-DYFLEX® LP 9607/2 is a hydroxy functional acrylic copolymer dispersion, used as a binder together with either blocked isocyanate or amino resin for 2K water based stoveable paints for glass. *Currently available in scale up as T-DYFLEX LP 9607/2 表示を減らす | |
| Clear Transparent Varnish for Exterior Wood (Formulation #ML-19-A) | EPS Materials | This formulation produces a clear transparent varnish for exterior wood. It features the product EPS® 745. | |
| DYFLEX® LP 1225 – Primer | EPS Materials | This is a starting formulation for a primer. It utilizes the product DYFLEX® LP 1225, which has exceptional leveling properties, in-can transparency, and excellent block, combined with fast hardness development, flexibility and early water resistance. | |
| DYFLEX® LP 2809 – Primer for MDF | EPS Materials | This formulation produces a primer for medium-density fibreboard. It features the product DYFLEX® LP 2809, which imparts exceptional leveling properties, in-can transparency, excellent block, and superior water resistance. | |
| EPS® 730 Efflorescence/Water Repellent (Formulation #2) | EPS Materials | This is an efflorescence/water repellant formulation. It features the product EPS® 730, which offers excellent adhesion properties over powdery surfaces. | |
| EPS® 730 Stabilization Solution (Formulation #1) | EPS Materials | This formulation produces a stabilization solution. It features the product EPS® 730, which offers excellent adhesion properties over powdery surfaces. | |
| High Gloss Starting Formulation (Formulation #A2-137-7) | EPS Materials | This starting formulation produces a high gloss architectural coating. It features the product EPS® 745, which offers exceptional leveling properties, in-can transparency, excellent block, combined with fast hardness development, flexibility and early wat...もっと表示する This starting formulation produces a high gloss architectural coating. It features the product EPS® 745, which offers exceptional leveling properties, in-can transparency, excellent block, combined with fast hardness development, flexibility and early water resistance. 表示を減らす | |
| Lazure (Formulation #ML-14-A1) | EPS Materials | This formulation produces a lazure paint. It features the product EPS® 745. | |
| Wall Matt Paint 40% PVC (Formulation #A2-326-3) | EPS Materials | This formulation produces a matt wall paint with 40% pigment volume concentrate. It utilizes the product EPS® 700, which offers good film properties and excellent durability. | |
| Wall Matt Paint 55% PVC (Formulation #A2-326-4) | EPS Materials | This formulation produces a matt wall paint with 55% pigment volume concentrate. It features the product EPS® 700, which offers good film properties and excellent durability. | |
| Wall Matt Paint 80% PVC (Formulation #A2-326-5) | EPS Materials | This formulation produces a matt wall paint with 80% pigment volume concentrate. It features the product EPS® 700, which imparts good film properties and excellent durability. | |
| White Pigmented Top-Coat (Formulation #ML-09-U) | EPS Materials | This formulation produces a white pigmented top-coat. It features the product PC-Mull® VP 435. |
