| CAPCURE® 3850-101 | Gabriel Performance Products | CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine ...もっと表示する CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. 表示を減らす | |
| Carbon Black N220 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N220 Pigment Black 7 is black bead or granular or grain and amorphous solid, it is odorless with burning point more than 400°C, water insoluble, non-poisonous, stable chemical properties, excellent weather and light fastness. | |
| Carbon Black N234 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N234 Pigment Black 7 is recommended to be used in the surface material of high speed tires, and rubber products of high quality. | |
| Carbon Black N326 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N326 Pigment Black 7 is recommended to be used in the tread rubber for tires of high strength, low-heated including all-terrain vehicle tires, it also fits for conveyor belts, airproof products, and other rubber products of high quality. | |
| Carbon Black N330 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N330 Pigment Black 7 is recommended to be used in the surface material of tires, the rubber for cord layer, rubber for inner tubes, and other rubber products. | |
| Carbon Black N339 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N339 Pigment Black 7 is recommended to be used in the tread rubber for ordinary car tires, heavy lorry tires. As well as the covering rubber of conveyer belt, the rubber tubes, and the rubber products requires for high wear resistance. | |
| Carbon Black N375 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N375 Pigment Black 7 is recommended to be used in the tread rubber for ordinary car tires, heavy lorry tires. As well as the covering rubber of conveyer belt, the rubber tubes, and the rubber products requires for high wear resistance. | |
| Carbon Black N550 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N550 Pigment Black 7 is recommended to be used in cord layer oftires, sidewall of tires, the rubber material for extrusion or calendered goods. | |
| Carbon Black N660 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N660 Pigment Black 7 is recommended to be used in cord layer oftires, inner tubes, bicycle tires, rubber tubes, rubber tapes, cable ropes, shoes kind, and patterns. | |
| Carbon Black N774 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N774 Pigment Black 7 is recommended to be used in tyre rubbers and belts. | |
| Carbowet® 138 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment...もっと表示する Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment wetting and perform in a wide range of applications. 表示を減らす | |
| Carbowet® GA-211 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment w...もっと表示する Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment wetting and deaeration and optimal milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-211 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Carbowet® GA-211 surfactant offers low foam and strong dynamic wetting properties. 表示を減らす | |
| Carbowet® GA-221 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment w...もっと表示する Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment wetting and deaeration and optimizes milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-221 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Compared to related products, Carbowet® GA-221 surfactant offers the most stabilization benefits and is a first choice for organic and carbon black pigment dispersions. 表示を減らす | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...もっと表示する Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 表示を減らす | |
| Cariflex™ IR0307 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and se...もっと表示する Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and sealants. 表示を減らす | |
| Cariflex™ IR0310 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and se...もっと表示する Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and sealants. 表示を減らす | |
| Cariflex™ IR0401 BU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Late...もっと表示する Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Latex is used in adhesives, coatings, and sealants. 表示を減らす | |
| Cariflex™ IR0401 SU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex ...もっと表示する Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex is used in adhesives, coatings, and sealants. 表示を減らす | |
| Catalizador Made 33 | Simon Quimica | Catalizador Made 33 is a hardener in coatings that are two-component polyurethanes for fast drying. It's viscosity is 11+/- copa Ford #4, and % solids is 33+/-2. | |
| Catalizador Made 50 | Simon Quimica | Catalizador Made 50 is a hardener in coatings that are two-component polyurethanes for drying and high-gloss. It's viscosity is 13+/- copa Ford #4, and % solids is 36+/-2. | |
| CD406 | Sartomer Americas | CD406 is a difunctional cycloaliphatic acrylate monomer that offers fast cure rates and produces hard, durable coatings with good clarity and adhesion to diverse substrates. CD406 is recommended for window films, polycarbonate coatings, solder masks, wood...もっと表示する CD406 is a difunctional cycloaliphatic acrylate monomer that offers fast cure rates and produces hard, durable coatings with good clarity and adhesion to diverse substrates. CD406 is recommended for window films, polycarbonate coatings, solder masks, wood, plastic, and paper coatings, dry film photo imaging, and metallized surface coating. 表示を減らす | |
| CD421A | Sartomer Americas | CD421A is a low viscosity, monofunctional methacrylate monomer containing a light stable cyclic group. It is a lower volatility, lower odor alternative to cyclohexyl methacrylate. It has excellent solvency characteristics and good adhesion to a var...もっと表示する CD421A is a low viscosity, monofunctional methacrylate monomer containing a light stable cyclic group. It is a lower volatility, lower odor alternative to cyclohexyl methacrylate. It has excellent solvency characteristics and good adhesion to a variety of substrates. CD421A has improved thermal stability, good chemical resistance, good hardness, good heat resistance, good water resistance, good weatherability, high abrasion resistance, high Impact Strength and Low shrinkage. Suggested applications are anaerobic adhesives, structural adhesives, anchor bolt adhesives, plastics, industrial coatings. 表示を減らす | |
| CD535 | Sartomer Americas | CD535 is a low viscosity cyclic monofunctional methacrylate monomer that is used in a variety of free radical peroxide or azonitrile cure applications, including polymer synthesis, coatings, adhesives, sealants and polymer modification. CD535 is a high Tg...もっと表示する CD535 is a low viscosity cyclic monofunctional methacrylate monomer that is used in a variety of free radical peroxide or azonitrile cure applications, including polymer synthesis, coatings, adhesives, sealants and polymer modification. CD535 is a high Tg, hard, low shrinkage monomer that provides good surface cure in thin film applications.This product has dual cure crosslinking capability, high strength and surface cure. Suggested applications include metal, plastic, and concrete coatings and sealants. 表示を減らす | |
| CD542 | Sartomer Americas | CD542 is a low volatility monomer used in free radical polymerization. Provides a good hydrophobic and hydrophilic balance. CD542 is a hydrophobic backbone for alkali solubility with low odor. Suggested applications include adhesives, coatings, solder ma...もっと表示する CD542 is a low volatility monomer used in free radical polymerization. Provides a good hydrophobic and hydrophilic balance. CD542 is a hydrophobic backbone for alkali solubility with low odor. Suggested applications include adhesives, coatings, solder masks, electronics, photoresists electronics and photopolymers. 表示を減らす | |
| CD545 | Sartomer Americas | CD545 is a diethylene glycol methyl ether methacrylate. It is a monofunctional monomer that is suited to peroxide-cured coatings, adhesives, sealants, and emulsion or solution acrylics. CD545 has good adhesion, high flexibility and low shrinkage. Suggeste...もっと表示する CD545 is a diethylene glycol methyl ether methacrylate. It is a monofunctional monomer that is suited to peroxide-cured coatings, adhesives, sealants, and emulsion or solution acrylics. CD545 has good adhesion, high flexibility and low shrinkage. Suggested applications include acrylics, adhesives, emulsion systems, peroxide-cured coatings, and sealants. 表示を減らす | |
| CD552 | Sartomer Americas | CD552 is a monofunctional methoxylated PEG (550) methacrylate monomer that features excellent wetting, water solubility, low Tg, and fast surface cure. It is recommended as a versatile chemical intermediate for coatings and polymer modification. Suggested...もっと表示する CD552 is a monofunctional methoxylated PEG (550) methacrylate monomer that features excellent wetting, water solubility, low Tg, and fast surface cure. It is recommended as a versatile chemical intermediate for coatings and polymer modification. Suggested applications include Chemical intermediates and polymer modification. 表示を減らす | |
| CD553 | Sartomer Americas | CD553 is a monofunctional methoxylated PEG (550) acrylate monomer that features excellent wetting, high flexibility, low Tg, and fast surface cure. Suggested applications include chemical intermediates and polymer modification. | |
| CD561 | Sartomer Americas | CD-561 is an alkoxylated hexane diol diacrylate monomer which offers reduced skin irritation, excellent flexibility, and improved compatibility with epoxy and urethane-based coating systems. CD-561 provides good adhesion, good weatherability and low shri...もっと表示する CD-561 is an alkoxylated hexane diol diacrylate monomer which offers reduced skin irritation, excellent flexibility, and improved compatibility with epoxy and urethane-based coating systems. CD-561 provides good adhesion, good weatherability and low shrinkage. Suggested Applications are coatings, floor and metal coatings, electronics, Inks, jet and screen inks. 表示を減らす | |
| CD563 | Sartomer Americas | CD563 is an alkoxylated hexanediol diacrylate monomer that offers reduced skin irritation and improved flexibility over hexanediol diacrylate. CD563 has a fast cure response, low volatility and pigment wetting. This product has good chemical and water res...もっと表示する CD563 is an alkoxylated hexanediol diacrylate monomer that offers reduced skin irritation and improved flexibility over hexanediol diacrylate. CD563 has a fast cure response, low volatility and pigment wetting. This product has good chemical and water resistance, high impact strength, adhesion and low shrinkage. Suggested applications are coatings, electronics and inks. 表示を減らす | |
| CD564 | Sartomer Americas | CD-564 is an alkoxylated hexane diol diacrylate monomer which offers reduced skin irritation and high utility in printing and coating applications. CD-564 has good adhesion, good weatherability and low shrinkage. Suggested applications include coatings, ...もっと表示する CD-564 is an alkoxylated hexane diol diacrylate monomer which offers reduced skin irritation and high utility in printing and coating applications. CD-564 has good adhesion, good weatherability and low shrinkage. Suggested applications include coatings, floor and metal coatings, electronics, jet and screen inks. 表示を減らす | |
| CD590 | Sartomer Americas | CD590 is a monomer that possesses a high liquid refractive index and flexibility. The monomer is suited for applications where refractive index matching, adhesion, and flexibility are required. | |
| CD595 | Sartomer Americas | CD595 is a clear liquid acrylate monomer that exhibits low odor and high reactivity. CD595 is useful in applications, such as coatings and digital and screen inks where outdoor weathering resistance is needed. This product's performance properties are adh...もっと表示する CD595 is a clear liquid acrylate monomer that exhibits low odor and high reactivity. CD595 is useful in applications, such as coatings and digital and screen inks where outdoor weathering resistance is needed. This product's performance properties are adhesion, good chemical resistance, good water resistance, high impact strength and low shrinkage. 表示を減らす | |
| CD730 | Sartomer Americas | CD730 is a triethylene glycol ethyl ether methacrylate monofunctional monomer developed for peroxide-cured coatings, adhesives, sealants, and emulsion or solution acrylics. Performance properties include good adhesion, high flexibility, high impact streng...もっと表示する CD730 is a triethylene glycol ethyl ether methacrylate monofunctional monomer developed for peroxide-cured coatings, adhesives, sealants, and emulsion or solution acrylics. Performance properties include good adhesion, high flexibility, high impact strength, and low shrinkage. 表示を減らす | |
| CD9043 | Sartomer Americas | CD9043 is an alkoxylated neopentyl glycol diacrylate monomer. CD9043 demonstrates good pigment wetting, solvent resistance and flexibility in radiation curable ink and coating applications. CD9043 is particularly suited to plastic substrates. Performance ...もっと表示する CD9043 is an alkoxylated neopentyl glycol diacrylate monomer. CD9043 demonstrates good pigment wetting, solvent resistance and flexibility in radiation curable ink and coating applications. CD9043 is particularly suited to plastic substrates. Performance properties for this product include adhesion, flexibility and weatherability. Suggested applications are coatings, plastic, and inks. 表示を減らす | |
| CD9055 | Sartomer Americas | CD9055 is an acidic acrylate that will promote adhesion to a number of different substrates, including metal and glass. It does not contain any (meth)acrylate monomers, thus giving formulators more latitude in use. The product should not be used in formul...もっと表示する CD9055 is an acidic acrylate that will promote adhesion to a number of different substrates, including metal and glass. It does not contain any (meth)acrylate monomers, thus giving formulators more latitude in use. The product should not be used in formulations with amines. CD9055 has good weatherability and low shrinkage that can be used for laminating and pressure sensitive adhesives, wood, plastic, and metal coatings, as well as flexo, letterpress, offset, and rotary screen inks. 表示を減らす | |
| CD9075 | Sartomer Americas | CD9075 is an alkoxylated lauryl acrylate monomer. CD9075 demonstrates good pigment wetting, flexibility, and cure speed in radiation curable ink, coating, and adhesive applications. CD9075 is particularly suited to plastic substrates. Performance properti...もっと表示する CD9075 is an alkoxylated lauryl acrylate monomer. CD9075 demonstrates good pigment wetting, flexibility, and cure speed in radiation curable ink, coating, and adhesive applications. CD9075 is particularly suited to plastic substrates. Performance properties for this product are adhesion and flexibility. Suggested applications include adhesives, laminating adhesives, pressure sensitive coatings, plastic and inks. 表示を減らす | |
| Ceridust® 3910 | Clariant Plastics & Coatings Ltd. | Ceridust® 3910 is a micronized amide wax. | |
| Ceridust® 6050 M | Clariant Plastics & Coatings Ltd. | Ceridust® 6050 M is a micronized metallocene-based polypropylene wax. | |
| CF1-135 | NuSil Silicone Technology 1 | CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different subst...もっと表示する CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different substrates such as metals, ceramics, glass, some plastics and other silicone material. It is a one-component primer that is supplied in VM&P Napththa and it requires no mixing. 表示を減らす | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...もっと表示する CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. 表示を減らす | |
| CF1-3510 | NuSil Silicone Technology 1 | CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be us...もっと表示する CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be used as an encapsulating, potting and sealing material and it is best used in applications requiring an operating temperature range of -65°C to 240°C (-85°F to 465°F). 表示を減らす | |
| CF1-3710-2 | NuSil Silicone Technology 1 | CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in s...もっと表示する CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in shock and vibration dampening situations that require a flexible, light weight foam with exceptional radiation resistance and thermal insulation. This foam is especially useful where stability at higher and lower temperatures is required. 表示を減らす | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...もっと表示する CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). 表示を減らす | |
| CF19-2615 | NuSil Silicone Technology 1 | CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel...もっと表示する CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel displays and discrete optics that require a 1.41 refractive index. It can also provide protection to electronic components and assemblies against vibration, shock, moisture, dust and other environmental hazards. 表示を減らす | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...もっと表示する CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. 表示を減らす | |
| CF2-3521 | NuSil Silicone Technology 1 | CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for mo...もっと表示する CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for molding parts such as O-rings, stoppers, and seals. 表示を減らす | |
| CF2-3521-2 | NuSil Silicone Technology 1 | CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also...もっと表示する CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also be used in applications that would require a solvent resistance. 表示を減らす | |
| CF3-3521 | NuSil Silicone Technology 1 | CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a m...もっと表示する CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a medium hardness silicone and solvent resistance. This product is best utilized in applications that require an operating temperature range of -65 to 240°C (-85 to 465°F). 表示を減らす | |
| CF5-3521-2 | NuSil Silicone Technology 1 | CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive ...もっと表示する CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive or molding material in applications that require solvent resistance. 表示を減らす | |
| CF6-135 | NuSil Silicone Technology 1 | CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...もっと表示する CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. 表示を減らす | |
| CH-4900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ult...もっと表示する CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ultraviolet, and ozone resistance to adhesives. 表示を減らす | |
| CH-5800 Insulating Glass Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and oz...もっと表示する CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and ozone resistance as a sealant. 表示を減らす | |
| CH-5900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural...もっと表示する CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural Sealant is used to provide various resistances to adhesives. 表示を減らす | |
| Charmor™ PM15 | Perstorp | Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for pl...もっと表示する Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM15 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. 表示を減らす | |
| Charmor™ PM40 | Perstorp | Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...もっと表示する Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 98%. 表示を減らす | |
| Charmor™ Pro DP40 C40 | Perstorp | Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It ha...もっと表示する Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It has the same quality and technical properties as the standard Charmor™ PM40. 表示を減らす | |
| Charmor™ PT40 | Perstorp | Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...もっと表示する Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 87%. 表示を減らす | |
| Chlorinated PVC-YURON CPVC | Yuron New Material | Chlorinated PVC-YURON CPVC is deeply chlorinated by PVC resin through the International leading aqueous phase suspension method. It has good solubility with toluene, xylene and a variety of aromatic hydrocarbon, ketone solvents. This product also has good...もっと表示する Chlorinated PVC-YURON CPVC is deeply chlorinated by PVC resin through the International leading aqueous phase suspension method. It has good solubility with toluene, xylene and a variety of aromatic hydrocarbon, ketone solvents. This product also has good acid and alkali resistance, weather resistance, water resistance, oil resistance, cold resistance and flame resistance. It also has good compatibility with most resins such as alkyd resin, acrylic resin, chlorinated rubber resin and high chlorinated polyethylene resin. 表示を減らす | |
| Chlorinated Rubber-YURON CR-130 | Yuron New Material | YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most est...もっと表示する YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most esters. 表示を減らす | |
| Chlorinated Rubber-YURON CR-170 | Yuron New Material | YURON CR-170 is a chlorinated rubber product supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene, and it is also soluble in...もっと表示する YURON CR-170 is a chlorinated rubber product supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene, and it is also soluble in most esters. 表示を減らす | |
| Chlorinated Rubber-YURON CR-22 | Yuron New Material | YURON CR-22 is a chlorinated rubber product supplied as a white powder. It is mainly added to solventborne contact adhesives. It is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most esters. | |
| Chlorinated Rubber-YURON CR-40 | Yuron New Material | YURON CR-40 is a chlorinated rubber supplied in the form of a white powder. It is used as a binder for anti-corrosion coatings and adhesives. This product is also recommended as a combination binder for alkyd resins and adhesive resins. | |
| Chlorinated Rubber-YURON CR-400 | Yuron New Material | YURON CR-400 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene and it is also soluble in most ester...もっと表示する YURON CR-400 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene and it is also soluble in most esters. 表示を減らす | |
| Chlorinated Rubber-YURON CR-90 | Yuron New Material | YURON CR-90 is chlorinated rubber, supplied as a white powder that is immiscible in water. It is recommended as a binder for anti-corrosion coatings and adhesives and as a combination binder for alkyd resins and acrylic resins. | |
| Chrome Oxide Green GM5066 Pigment Green 17 | Hangzhou Epsilon Chemical Co., Ltd. | Chrome Oxide Green GM5066 Pigment Green 17 is a heat stable, super fine and micronized chromium oxide green pigment. It fulfills the higher requirements necessary in the paint and coating industry. The product is also used for coloring plastics or masterb...もっと表示する Chrome Oxide Green GM5066 Pigment Green 17 is a heat stable, super fine and micronized chromium oxide green pigment. It fulfills the higher requirements necessary in the paint and coating industry. The product is also used for coloring plastics or masterbatches and can be applied in the field of Wood Plastic Composites. Moreover, it can also be applied in the paper industry for the coloration of laminate paper. GM5066 exhibits good dispersibility, even in processes which have short dwell times and relatively low shear forces. 表示を減らす | |
| Chrome Oxide Green GN4058 Pigment Green 17 | Hangzhou Epsilon Chemical Co., Ltd. | Chrome Oxide Green GN4058 Pigment Green 17 is a heat stable chromium oxide green pigment. It is used extensively in the coloration of construction materials and in the paper industry in the field of colored laminate papers. In addition, the pigment can al...もっと表示する Chrome Oxide Green GN4058 Pigment Green 17 is a heat stable chromium oxide green pigment. It is used extensively in the coloration of construction materials and in the paper industry in the field of colored laminate papers. In addition, the pigment can also be used for the coloration of glazes, enamels or engobes in the ceramic industry. The product exhibits good dispersibility, excellent lightfastness and weather stable. GN4058 is also used particularly for applications where high heat stability is required, it is very low chrome (VI) content. 表示を減らす | |
| Chrome Oxide Green GP7450 Pigment Green 17 | Hangzhou Epsilon Chemical Co., Ltd. | Chrome Oxide Green GP7450 Pigment Green 17 is specially made for paints and coatings application. Compared with normal grade chrome oxide green, GP7450 offers 10% higher tinting strength and hiding power while lower prices. Furthermore, it has less residu...もっと表示する Chrome Oxide Green GP7450 Pigment Green 17 is specially made for paints and coatings application. Compared with normal grade chrome oxide green, GP7450 offers 10% higher tinting strength and hiding power while lower prices. Furthermore, it has less residue, excellent light and weather resistance, as well as heat resistance. 表示を減らす | |
| Chrome Oxide Green GS1018 Pigment Green 17 | Hangzhou Epsilon Chemical Co., Ltd. | Chrome Oxide Green GS1018 Pigment Green 17 is a heat stable chrome oxide greenpigment. It is used extensively in the coloration of construction materials, which can improve UV stability. In addition, the pigment can also be used for the coloration of glaz...もっと表示する Chrome Oxide Green GS1018 Pigment Green 17 is a heat stable chrome oxide greenpigment. It is used extensively in the coloration of construction materials, which can improve UV stability. In addition, the pigment can also be used for the coloration of glazes, enamels or engobes in the ceramic industry. GS1018 exhibits good dispersibility, easy to break down and distribute to reach its final tinting strength quickly. It is very lightfast and weather stable. 表示を減らす | |
| Chrome Oxide Green GX8090 Pigment Green 17 | Hangzhou Epsilon Chemical Co., Ltd. | Chrome Oxide Green GX8090 Pigment Green 17 is a heat stable chromium oxide green pigment. It is used extensively in the coloration of construction materials and in the paper industry in the field of colored laminate papers. In addition, the pigment can al...もっと表示する Chrome Oxide Green GX8090 Pigment Green 17 is a heat stable chromium oxide green pigment. It is used extensively in the coloration of construction materials and in the paper industry in the field of colored laminate papers. In addition, the pigment can also be used for the coloration of glazes, enamels or engobes in the ceramic industry. The product exhibits good dispersibility, excellent light fastness and weather stability. GX8090 is also used particularly for applications where high heat stability is required. It is very low chrome (VI) content. 表示を減らす | |
| Chrome Oxide Green M5507 Pigment Green 17 | Hangzhou Epsilon Chemical Co., Ltd. | Chrome Oxide Green M5507 Pigment Green 17 is a high quality chrome oxide greenwhich can be used to produce chrome metal. In turn, chrome metal can be combined with other metals to produce high performance super-alloys used in the aerospace industry. Chrom...もっと表示する Chrome Oxide Green M5507 Pigment Green 17 is a high quality chrome oxide greenwhich can be used to produce chrome metal. In turn, chrome metal can be combined with other metals to produce high performance super-alloys used in the aerospace industry. Chrome oxide green M5507 is a fine dark green powder. When mixed with aluminium and potassium dichromate, using the alumino-thermic process, chromic oxide produces high purity chromium metal. This is a vital ingredient in the production of the high performance super-alloys used in the aerospace industry. Furthermore, M5507 can also be used in military and camouflage coatings applications which require high reflectivity in the infrared range. 表示を減らす | |
| Chrome Oxide Green PT5376 Pigment Green 17 | Hangzhou Epsilon Chemical Co., Ltd. | Chrome Oxide Green PT5376 Pigment Green 17 is high quality pigment grade chrome oxide green. Compared with other green pigments, chromic oxide gives excellent light fastness, durability, stability and performance. It is also unaffected by acids, alkalis a...もっと表示する Chrome Oxide Green PT5376 Pigment Green 17 is high quality pigment grade chrome oxide green. Compared with other green pigments, chromic oxide gives excellent light fastness, durability, stability and performance. It is also unaffected by acids, alkalis and solvents. 表示を減らす | |
| Chrome Oxide Green RT4906 Pigment Green 17 | Hangzhou Epsilon Chemical Co., Ltd. | Chrome Oxide Green RT4906 Pigment Green 17 is high quality chrome oxide green.This dark green powder with metal luster is insoluble in water and hardly soluble in acid. With a melting point of 2300°C and boiling point 4000°C, chromic oxide is commonly use...もっと表示する Chrome Oxide Green RT4906 Pigment Green 17 is high quality chrome oxide green.This dark green powder with metal luster is insoluble in water and hardly soluble in acid. With a melting point of 2300°C and boiling point 4000°C, chromic oxide is commonly used in the production of refractory bricks to line metallurgical and glass furnaces and kilns, these bricks are often used in glass furnace linings, in the steel production process or in the chemical industry. while the shaped bricks in the fire door of steel furnace require lower iron and aluminum content, some even is needed to be desulfidation. 表示を減らす | |
| CHS-Alkyd AKS 281 X 60 | Spolchemie | CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this...もっと表示する CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. 表示を減らす | |
| CHS-Alkyd AL 2900 | Spolchemie | CHS-Alkyd AL 2900 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from linoleic rich fatty acids and has a low viscosity 60% solution in xylene. The oil length for this product is estimated to be around 30%. CHS-Alkyd ...もっと表示する CHS-Alkyd AL 2900 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from linoleic rich fatty acids and has a low viscosity 60% solution in xylene. The oil length for this product is estimated to be around 30%. CHS-Alkyd AL 2900 is primarily used for fast drying high performance topcoats and industrial primers. 表示を減らす | |
| CHS-Alkyd AL 3220 | Spolchemie | CHS-Alkyd AL 3220 is a clear short oiled alkyd resin binder for solvent borne coatings. This product is made from coconut oil fatty acids and is provided as a low viscous 75% solution in methyl ethyl ketone. The oil length for this product is estimated to...もっと表示する CHS-Alkyd AL 3220 is a clear short oiled alkyd resin binder for solvent borne coatings. This product is made from coconut oil fatty acids and is provided as a low viscous 75% solution in methyl ethyl ketone. The oil length for this product is estimated to be around 32%. CHS-Alkyd AL 3220 is primarily used for non-yellowing coatings for wood and metal surfaces. 表示を減らす | |
| CHS-Alkyd AL 3701 | Spolchemie | CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. Th...もっと表示する CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 37%. This product is primarily used for fast drying, lift resistant and anticorrosion coatings. 表示を減らす | |
| CHS-Alkyd AL 3961 | Spolchemie | CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimat...もっと表示する CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimated to be around 29%. This product has high hydroxyl content and paint stability. CHS-Alkyd AL 3961 is primarily used for fast drying water and solvent borne primers, topcoats. 表示を減らす | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...もっと表示する CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. 表示を減らす | |
| CHS-Alkyd C 351 E 75 | Spolchemie | CHS-Alkyd C 351 E 75 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 75% solution in butyl acetate. The oil length for this product is estimated ...もっと表示する CHS-Alkyd C 351 E 75 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 75% solution in butyl acetate. The oil length for this product is estimated to be around 39%. CHS-Alkyd C 351 E 75 is primarily used for stove coatings and paints constructed on nitrocellulose. 表示を減らす | |
| CHS-Alkyd C 351 X 60 | Spolchemie | CHS-Alkyd C 351 X 60 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be a...もっと表示する CHS-Alkyd C 351 X 60 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 39%. CHS-Alkyd C 351 X 60 is primarily used for stove coatings and paints fabricated on nitrocellulose. 表示を減らす | |
| CHS-Alkyd LUR 740 NN 80 | Spolchemie | CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....もっと表示する CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anticorrosion. 表示を減らす | |
| CHS-Alkyd M 552 WX 60 | Spolchemie | CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder...もっと表示する CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder for producing universal coatings. This product is primarily used in formulations for anti-corrosive priming coats that are combined with chlorinated rubber and phenolic resins or amino resins. 表示を減らす | |
| CHS-Alkyd S 401 X 55 | Spolchemie | CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...もっと表示する CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 55 is primarily used for air-drying anti-corrosion coatings on metal surfaces. 表示を減らす | |
| CHS-Alkyd S 401 X 60 | Spolchemie | CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...もっと表示する CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. 表示を減らす | |
| CHS-Alkyd S 471 WX 55 | Spolchemie | CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is...もっと表示する CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is primarily used for producing priming paints, enamels and quick drying coatings and lacquers. 表示を減らす | |
| CHS-Alkyd S 471 X 60 | Spolchemie | CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 47...もっと表示する CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 471 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. For coating compositions provided in aerosol containers. 表示を減らす | |
| CHS-Alkyd S 491 W 55 | Spolchemie | CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W ...もっと表示する CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W 55 is primarily used for manufacture in primer coatings for metal surfaces. 表示を減らす | |
| CHS-Alkyd S 491 WB 55 | Spolchemie | CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this prod...もっと表示する CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 WB 55 is used for primers, white coatings and lacquers on metal surfaces. 表示を減らす | |
| CHS-Alkyd S 618 W 80 | Spolchemie | CHS-Alkyd S 618 W 80 is a long oiled binder with adhesion and hardness for high solid alkyd resin coatings and is made from soybean oil. This product has a high viscosity and 80% solution is in white spirit. CHS-Alkyd S 618 W 80 is primarily used for wood...もっと表示する CHS-Alkyd S 618 W 80 is a long oiled binder with adhesion and hardness for high solid alkyd resin coatings and is made from soybean oil. This product has a high viscosity and 80% solution is in white spirit. CHS-Alkyd S 618 W 80 is primarily used for wood and metal paints that are intended for being applied on exterior surfaces. 表示を減らす | |
| CHS-Alkyd S 621 W 60 | Spolchemie | CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in w...もっと表示する CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. 表示を減らす | |
| CHS-Alkyd S 622 N 60 | Spolchemie | CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic ...もっと表示する CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic content is just under one percent. This product is primarily used for air-drying coatings, enamels, lacquers and wood stains for exteriors and interiors. 表示を減らす | |
| CHS-Alkyd S 622 W 55 | Spolchemie | CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in w...もっと表示する CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. 表示を減らす | |
| CHS-Alkyd S 623 NN 50 | Spolchemie | CHS-Alkyd S 623 NN 50 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 50 percent solution in de-aromatized white spirit with flash point higher...もっと表示する CHS-Alkyd S 623 NN 50 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 50 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. Aromatic content is just under 1 percent. The primary use for this product is for environmentally friendly air-drying coatings that can be used on interiors and exteriors. 表示を減らす | |
| CHS-Alkyd S 623 NN 60 | Spolchemie | CHS-Alkyd S 623 NN 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 60 percent solution in de-aromatized white spirit with flash point higher...もっと表示する CHS-Alkyd S 623 NN 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 60 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. Aromatic content is just under 1 percent. The primary use for this product is for environmentally friendly air-drying coatings that can be used on interiors and exteriors. 表示を減らす | |
| CHS-Alkyd S 652 NN 70 | Spolchemie | CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash poi...もっと表示する CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 652 NN 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. 表示を減らす | |
| CHS-Alkyd S 653 W 70 | Spolchemie | CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily use...もっと表示する CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. 表示を減らす | |
| CHS-Alkyd S 670 NN 75 | Spolchemie | CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash p...もっと表示する CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 670 NN 75 is primarily used for air-drying wood and metal coatings for interior and exterior use. 表示を減らす | |
| CHS-Alkyd ST 551 N 50 | Spolchemie | CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has...もっと表示する CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has as gel like structure, the aromatic content is less than 1 percent. This product is primarily used for air-drying thixotropic synthetic paints that are used for interiors and exteriors as penetrates and lacquers. It is used to prevent pigment and fillers from settling in synthetic paints. 表示を減らす | |
| CHS-Alkyd SU 621 N 50 | Spolchemie | CHS-Alkyd SU 621 N 50 is a urethane long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 50 percent solution in de-aromatized white spirit. Aromatic conte...もっと表示する CHS-Alkyd SU 621 N 50 is a urethane long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 50 percent solution in de-aromatized white spirit. Aromatic content is just under 1 percent. This product is primarily used for fast air-drying coatings, enamels and transparent varnishes for interior and exterior uses on wood. It provides gloss and water resistance. 表示を減らす | |
| CHS-Alkyd SU 632 N 60 | Spolchemie | CHS-Alkyd SU 632 N 60 is a urethane long oiled universal binder with high hardness. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 60 percent solution in de-aromatized white spirit. Aromatic content is ju...もっと表示する CHS-Alkyd SU 632 N 60 is a urethane long oiled universal binder with high hardness. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 60 percent solution in de-aromatized white spirit. Aromatic content is just under 1 percent. This product is primarily used for fast air-drying coatings, enamels and transparent varnishes for interior and exterior uses on wood. It provides gloss and water resistance. 表示を減らす |
