| 1,6-Hexanediol | Perstorp | 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications. | |
| 4646-X-50 Epoxy Ester | Gabriel Performance Products | 4646-X-50 Epoxy Ester is a versatile epoxy ester resin which gives fast air drying enamels and primers excellent adhesion. 4646-X-50 can be cross linked with melamines for chemical and corrosion resistant finishes. | |
| 4724-XT-80 High Solids VT Alkyd Copolymer Resin | Gabriel Performance Products | 4724-XT-80 High Solids VT Alkyd Copolymer Resin is supplied at 80% non- volatile in a blend of xylene and toluene. The resin exhibits rapid dry, good toughness, and hardness. It is intended for use in fast drying industrial finishes with low VOCs. | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 4870-M-70 Alkyd Resin | Gabriel Performance Products | 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...もっと表示する 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. 表示を減らす | |
| 4929-X-50 Silicone Modified Short Oil Alkyd | Gabriel Performance Products | 4929-X-50 Silicone Modified Short Oil Alkyd is a fast air dry silicone modified alkyd for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. | |
| 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd | Gabriel Performance Products | 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd based on tall oil. It is recommended for high solids industrial enamels and primers. This resin has an extremely fast set time and rate of through dry. | |
| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...もっと表示する 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. 表示を減らす | |
| 5017-M-60 Chlorendic Modified Alkyd Resin | Gabriel Performance Products | 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time. | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5063-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film...もっと表示する 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film properties at the same time. 表示を減らす | |
| 5075-BS-85 Water Reducible Saturated Polyester Resin | Gabriel Performance Products | 5075-BS-85 Water Reducible Saturated Polyester Resin is a fast curing water reducible polyester resin intended for industrial and OEM finishes. | |
| AB-70F | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-70F is NMP free aliphatic urethane dispersion with good gloss, flow, water resistance, adhesion, tough, flexible, and is applicable in mold coatings. It is applicable for numerous different coatings such as, plastic, industrial, and more. | |
| AB-72FD | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-72FD is NMP free aliphatic urethane dispersion with good chemical resistance, high clarity, solvent resistance, and good scratch and mar resistance. It is applicable for numerous different coatings such as, plastic, metal, wood, industrial, and more. | |
| AB-91F | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-91F is NMP free aliphatic urethane dispersion that has medium hardness, good hydrolytic stability, tough, good adhesion, and more. It is applicable for numerous different coatings such as, plastic, metal, industrial, and more. | |
| Abimal 125 | Spolchemie | Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It al...もっと表示する Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It also provides weather resistance and gloss finish. 表示を減らす | |
| Accoat 1G | Accoat A/S | Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...もっと表示する Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accoat 2G | Accoat A/S | Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...もっと表示する Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accofal 1G54 | Accoat A/S | Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...もっと表示する Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accofal 2G54 | Accoat A/S | Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...もっと表示する Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accofal 3G | Accoat A/S | Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pro...もっと表示する Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accofal 3G54 | Accoat A/S | Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...もっと表示する Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accolan G | Accoat A/S | Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...もっと表示する Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in the glue, varnish and paint industries as a coating for a mixing vats, regular vats and other processing equipment. 表示を減らす | |
| Accolan LB | Accoat A/S | Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and...もっと表示する Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 表示を減らす | |
| Accolan S | Accoat A/S | Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust...もっと表示する Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 表示を減らす | |
| Accolan Silver | Accoat A/S | Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and ...もっと表示する Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is safe to use in the foodstuffs industry, particularly in mixers, on conveyer belts and in dough vats. It is also an excellent coating for cutting tools, knives and freeze-drying trays. 表示を減らす | |
| Accoshield | Accoat A/S | Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have bee...もっと表示する Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in industries where corrosion protection at high temperatures are required. 表示を減らす | |
| Accotron | Accoat A/S | Accotron is a dark grey or green colored fluoropolymer coating. It is applied to products mainly to improve anti-corrosive attributes. This product is used in the paints and coatings industry. | |
| AEROSIL® R 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia. | Request Sample |
| AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
| ALKFORT 3060 | Oswaldo Cruz Quimica | ALKFORT 3060 resin is a short alkyd resin in soybean oil. It offers good adhesion, flexibility, durability, and rapid curing. This product is recommended for industrial paints, synthetic systems, polyurethanes, and varnishes. | |
| ALKFORT 3061 | Oswaldo Cruz Quimica | ALKFORT 3061 is a short soybean oil alkyd resin, with medium viscosity. Its properties include good adhesion, flexibility, durability and rapid curing. It was developed appropriately for industrial paints, synthetic systems, and polyurethanes, and is also...もっと表示する ALKFORT 3061 is a short soybean oil alkyd resin, with medium viscosity. Its properties include good adhesion, flexibility, durability and rapid curing. It was developed appropriately for industrial paints, synthetic systems, and polyurethanes, and is also suitable for line of polyurethane varnishes. 表示を減らす | |
| ALKFORT 3066 | Oswaldo Cruz Quimica | ALKFORT 3066 is a short alkyd resin dehydrated castor oil (DCO). Its properties include excellent adhesion, luster, durability and excellent resistance. This product is recommended for industrial paints, synthetic systems, polyurethanes, and automotive en...もっと表示する ALKFORT 3066 is a short alkyd resin dehydrated castor oil (DCO). Its properties include excellent adhesion, luster, durability and excellent resistance. This product is recommended for industrial paints, synthetic systems, polyurethanes, and automotive enamels with optimal properties. 表示を減らす | |
| ALKFORT 3250 | Oswaldo Cruz Quimica | ALKFORT 3250 is a medium alkyd resin in soya oil. It offers excellent brightness, weather resistance, excellent durability, and compatibility with other resins. This product is used for grinding pigments, manufacturing of industrial and decorative synthet...もっと表示する ALKFORT 3250 is a medium alkyd resin in soya oil. It offers excellent brightness, weather resistance, excellent durability, and compatibility with other resins. This product is used for grinding pigments, manufacturing of industrial and decorative synthetic enamels, and is also suitable for formulations for air- and kiln-drying enamels. It also shows great results in enamels for agricultural implements. 表示を減らす | |
| ALKFORT 3660 | Oswaldo Cruz Quimica | ALKFORT 3660 alkyd resin is a short soybean oil, modified with reactive phenolic resin and rosin. It offers quick drying, high hardness, and compatibility with other resins. This product is suitable for synthetic primers for rapid drying, and is also indi...もっと表示する ALKFORT 3660 alkyd resin is a short soybean oil, modified with reactive phenolic resin and rosin. It offers quick drying, high hardness, and compatibility with other resins. This product is suitable for synthetic primers for rapid drying, and is also indicated for paints for industrial synthetic drums and agricultural implements. 表示を減らす | |
| ALKFORT 3661 | Oswaldo Cruz Quimica | ALKFORT 3661 alkyd resin is a short soybean oil, modified with reactive phenolic resin and rosin. Its properties include quick drying, high hardness, and compatibility with other resins. This product is suitable for synthetic primers for rapid drying, and...もっと表示する ALKFORT 3661 alkyd resin is a short soybean oil, modified with reactive phenolic resin and rosin. Its properties include quick drying, high hardness, and compatibility with other resins. This product is suitable for synthetic primers for rapid drying, and is also indicated for paints for industrial synthetic drums and agricultural implements. 表示を減らす | |
| Ancamide® 220 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings. | Request Sample |
| ANCAMIDE® 220-IPA-73 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-IPA-73 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers, and coatings for concrete. | Request Sample |
| ANCAMIDE 221® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excelle...もっと表示する ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 表示を減らす | Request Sample |
| ANCAMIDE 221-X70® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xyle...もっと表示する ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xylene. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 表示を減らす | Request Sample |
| Aqualac AYD-127 | Aquent Impex | Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...もっと表示する Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). 表示を減らす | |
| Aqualac AYD-128 | Aquent Impex | Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...もっと表示する Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). 表示を減らす | |
| Araldite® GT 6099 | Jubail Chemical Industries Co. | Araldite® GT 6099 is a high molecular weight, solid epoxy resin based on Bisphenol A. This product is characterized by its deep-drawing capability, flexibility, impact resistance, and chemical resistance. Araldite® GT 6099 is used in the formulation of he...もっと表示する Araldite® GT 6099 is a high molecular weight, solid epoxy resin based on Bisphenol A. This product is characterized by its deep-drawing capability, flexibility, impact resistance, and chemical resistance. Araldite® GT 6099 is used in the formulation of heat-curing primers and enamels as well as anti-corrosion paints when combined with polyisocyanates. 表示を減らす | |
| Araldite® GT 6609 | Jubail Chemical Industries Co. | Araldite® GT 6609 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, flexibility, impact resistance, and chemical resistance. Araldite® GT 6609 is used in the formulation of baking pr...もっと表示する Araldite® GT 6609 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, flexibility, impact resistance, and chemical resistance. Araldite® GT 6609 is used in the formulation of baking primers and enamels as well as cold-curing coatings when combined with polyisocyanates. 表示を減らす | |
| Araldite® GT 7071 | Jubail Chemical Industries Co. | Araldite® GT 7071 is a low melting, solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion ...もっと表示する Araldite® GT 7071 is a low melting, solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Araldite® GT 7071 is designed for use in the formulation of protective coating systems and decorative coating systems. 表示を減らす | |
| Araldite® GT 7072 | Jubail Chemical Industries Co. | Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. A...もっと表示する Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Araldite® GT 7072 is designed for use in high performance coating systems. 表示を減らす | |
| Araldite® GT 7074 | Jubail Chemical Industries Co. | Araldite® GT 7074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Araldite® GT 7074 is designed for use in the formu...もっと表示する Araldite® GT 7074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Araldite® GT 7074 is designed for use in the formulation of functional powder coating systems like pipe and rebar applications. 表示を減らす | |
| Araldite® GZ 471 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 471 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Araldite® GZ 471 X 7...もっと表示する Araldite® GZ 471 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Araldite® GZ 471 X 75 is used in the formulation of acrylic resin system coatings, marine maintenance, and protective coatings applications. 表示を減らす | |
| Araldite® GZ 7071 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 70...もっと表示する Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 7071 X 75 is used in the formulation for adhesive primers, anti-corrosive primers, zinc dust primers, top coats, and clear lacquers. 表示を減らす | |
| ASCOTRAN® H30 | ASCOTEC | ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very se...もっと表示する ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 表示を減らす | Request Sample |
| Aspartic Ester Resin Sunaspar SN220 | Suny Chem | Aspartic Ester Resin Sunaspar SN220 is a solvent free amine-functional aspartic ester resin used as a reactive partner for polyisocyanates. It's used in adhesive fields, anti-corrosion surface coating for steel structure, oil pipeline, heavy and light cor...もっと表示する Aspartic Ester Resin Sunaspar SN220 is a solvent free amine-functional aspartic ester resin used as a reactive partner for polyisocyanates. It's used in adhesive fields, anti-corrosion surface coating for steel structure, oil pipeline, heavy and light corrosion protection, bubble landscape coating, fan blade coating and concrete water proofing materials. 表示を減らす | |
| Aspartic Ester Resin Sunaspar SN520 | Suny Chem | Sunaspar SN520 is a solvent free amine-functional aspartic ester resin used as reactive partner for polyisocyanates. This product has high solid content, low viscosity, and excellent compatibility with most hydroxy acrylate resins. It offers excellent ha...もっと表示する Sunaspar SN520 is a solvent free amine-functional aspartic ester resin used as reactive partner for polyisocyanates. This product has high solid content, low viscosity, and excellent compatibility with most hydroxy acrylate resins. It offers excellent hardness, fullness, leveling and gloss properties. It also has good resistance to weather, solvents, acids and alkalies and saline water. This product is widely used in automobile, industrial, and anti-corrosion paints. 表示を減らす | |
| Bayhydrol® A 2809 XP | Covestro | Bayhydrol® A 2809 XP is a water-reducible, hydroxyfunctional polyacrylic dispersion. Can be used in combination with aliphatic polyisocyanates to formulate aqueous two-component clear-, topcoats, primer and filler for heavy transport finishing, industrial...もっと表示する Bayhydrol® A 2809 XP is a water-reducible, hydroxyfunctional polyacrylic dispersion. Can be used in combination with aliphatic polyisocyanates to formulate aqueous two-component clear-, topcoats, primer and filler for heavy transport finishing, industrial coating, plastic and wood applications. 表示を減らす | |
| Benasol 4V | Benasedo | Benasol 4V is a very fast air drying alkyd resin phenolic modified having good through dry. It is especially recommended for rust-inhibitive metal and nitrocellulose non lifting primers, fast air–drying enamels for farm and industrial equipment. | |
| BENASOL AS 3716 | Benasedo | BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber...もっと表示する BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. 表示を減らす | |
| BENASOL HS 6922 | Benasedo | BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...もっと表示する BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 表示を減らす | |
| BENASOL HS 7100 | Benasedo | BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...もっと表示する BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 表示を減らす | |
| BENASOL L 50 AV | Benasedo | BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...もっと表示する BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. 表示を減らす | |
| Benester 896 | Benasedo | Benester 896 is a saturated polyester resin, slightly branched, endowed with excellent mechanical properties, high reactivity, good flow and brightness. It is employed, crosslinked with amino-resins or blocked polyisocyanates, in industrial baking primers...もっと表示する Benester 896 is a saturated polyester resin, slightly branched, endowed with excellent mechanical properties, high reactivity, good flow and brightness. It is employed, crosslinked with amino-resins or blocked polyisocyanates, in industrial baking primers and enamels, particularly for base- coats and over-print varnishes with good printability properties also with UV inks, in cans, spray-bottles and collapsible tubes. 表示を減らす | |
| BENTONE® DY | Elementis | BENTONE® DY additive is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | |
| Benzimidazolone Yellow H4G | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Benzimidazolone Yellow H4G is a greenish shade yellow pigment that features high color strength, good heat stability, and warping resistance. This product has a density of 1.57 g/cm3 and a pH value of 6.5-7.5. It is commonly used in decorative paints, ind...もっと表示する Benzimidazolone Yellow H4G is a greenish shade yellow pigment that features high color strength, good heat stability, and warping resistance. This product has a density of 1.57 g/cm3 and a pH value of 6.5-7.5. It is commonly used in decorative paints, industrial paints, and OEM paints. 表示を減らす | |
| Benzimidazolone Yellow S3G | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Benzimidazolone Yellow S3G is a greenish yellow pigment that features good heat stability, excellent light fastness, and weather fastness. This product has a density of 1.57 g/cm3 and a pH value of 6.5-7.5. It is commonly used in decorative paints, indust...もっと表示する Benzimidazolone Yellow S3G is a greenish yellow pigment that features good heat stability, excellent light fastness, and weather fastness. This product has a density of 1.57 g/cm3 and a pH value of 6.5-7.5. It is commonly used in decorative paints, industrial paints, and powder coatings. 表示を減らす | |
| Boltorn™ H2004 | Perstorp | Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Bolt...もっと表示する Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Boltorn™ H2004 improves ink transfer at high speeds in printing applications and is also used in UV-curable resins and industrial coatings. 表示を減らす | |
| Boltorn™ H2004 | Univar Solutions | Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Bolt...もっと表示する Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Boltorn™ H2004 improves ink transfer at high speeds in printing applications and is also used in UV-curable resins and industrial coatings. 表示を減らす | |
| Brasmide NR 7050 | SGS Polimeros | Brasmide NR 7050 is a polyamide resin in anhydrous ethanol, obtained by the reaction of fatty acids and polyamides. It is designed for use in paints with high solids content in order to improve gloss, chemical resistance, and mechanical resistance. | |
| Brasmide RW 100 | SGS Polimeros | Brasmide RW 100 is a polyamide resin in aqueous solution of 65% non-volatiles. It has emulsionability with epoxy resin, dispensing the need of emulsifiers and additional surfactants. Brasmide RW 100 is used with epoxy resins in the formulation of finished...もっと表示する Brasmide RW 100 is a polyamide resin in aqueous solution of 65% non-volatiles. It has emulsionability with epoxy resin, dispensing the need of emulsifiers and additional surfactants. Brasmide RW 100 is used with epoxy resins in the formulation of finished inks, primers, floor coverings, and industrial maintenance inks. 表示を減らす | |
| Brominated Epoxy Oligomers | Hainan Zhongxin Chemical Co., Ltd. | Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excelle...もっと表示する Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excellent thermal and light stability. 表示を減らす | |
| Brominated Polystyrene | Hainan Zhongxin Chemical Co., Ltd. | Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(...もっと表示する Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(nylon) ect. 表示を減らす | |
| BYD-1008 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1008, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in industrial paints, leather paints, and wood paints. This product is resistant to solvents and alcohol. It is durable for kinkin...もっと表示する BYD-1008, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in industrial paints, leather paints, and wood paints. This product is resistant to solvents and alcohol. It is durable for kinking applications and is resistant to yellowing. 表示を減らす | |
| BYD-1016 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1016, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne industrial paints, wood paints, glass paints, and leather varnishes. This product is non-toxic. Its substrate is an ...もっと表示する BYD-1016, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne industrial paints, wood paints, glass paints, and leather varnishes. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. 表示を減らす | |
| BYK-1616 | BYK | BYK-1616 is a silicone-containing defoamer for aqueous printing inks and overprint varnishes, as well as aqueous wood and furniture coatings and general industrial coatings. | |
| BYK-1641 | BYK | BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio. | |
| BYK-3540 | BYK | BYK-3540 is a silicone- and APEO-free leveling additive for automotive and industrial coatings, especially ED coatings, used to avoid surface defects with a simultaneous defoaming effect. | |
| BYK-3568 | BYK | BYK-3568 is a surface-active additive to improve leveling and increase the surface energy of solvent-borne, 100 %, and UV systems, with a medium reduction in surface tension and a medium increase in surface slip. | |
| CH-910 | Yangzhou Chenhua New Material CO., LTD. | CH-910 is a milky liquid which is an aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and a clear luster. CH-910 is used as a rigid substrate coating. | |
| CH-911 | Yangzhou Chenhua New Material CO., LTD. | CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance ...もっと表示する CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance to coatings. 表示を減らす | |
| CH-920 | Yangzhou Chenhua New Material CO., LTD. | CH-920 is a milky liquid which is an aromatic water-borne polyurethane resin. This product has an anionic lonic charge and a luster of 96 60oC. CH-920 is used as a rigid substrate coating. | |
| CH-940 | Yangzhou Chenhua New Material CO., LTD. | CH-940 is a milky liquid which is a aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and an elongation of 100 percent. Ch-940 is used as a rigid substrate coating. | |
| CHS-Alkyd AKS 281 X 60 | Spolchemie | CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this...もっと表示する CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. 表示を減らす | |
| CHS-Alkyd AL 3701 | Spolchemie | CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. Th...もっと表示する CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 37%. This product is primarily used for fast drying, lift resistant and anticorrosion coatings. 表示を減らす | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...もっと表示する CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. 表示を減らす | |
| CHS-Alkyd LUR 740 NN 80 | Spolchemie | CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....もっと表示する CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anticorrosion. 表示を減らす | |
| CHS-Alkyd M 552 WX 60 | Spolchemie | CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder...もっと表示する CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder for producing universal coatings. This product is primarily used in formulations for anti-corrosive priming coats that are combined with chlorinated rubber and phenolic resins or amino resins. 表示を減らす | |
| CHS-Alkyd S 401 X 55 | Spolchemie | CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...もっと表示する CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 55 is primarily used for air-drying anti-corrosion coatings on metal surfaces. 表示を減らす | |
| CHS-Alkyd S 401 X 60 | Spolchemie | CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...もっと表示する CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. 表示を減らす | |
| CHS-Alkyd S 471 X 60 | Spolchemie | CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 47...もっと表示する CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 471 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. For coating compositions provided in aerosol containers. 表示を減らす | |
| CHS-Alkyd S 491 WB 55 | Spolchemie | CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this prod...もっと表示する CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 WB 55 is used for primers, white coatings and lacquers on metal surfaces. 表示を減らす | |
| CHS-Alkyd SUR 735 NN 80 | Spolchemie | CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....もっと表示する CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 73%. CHS-Alkyd SUR 735 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anti-corrosion. 表示を減らす | |
| CHS-Alkyd T 501 WX 55 | Spolchemie | CHS-Alkyd T 501 WX 55 is a medium oiled binder for solvent borne coatings. This product is made from tall oil fatty acids and has low viscosity 55 percent solution in a mixture of white spirit and xylene. CHS-Alkyd T 501 WX 55 is a driver for formulating ...もっと表示する CHS-Alkyd T 501 WX 55 is a medium oiled binder for solvent borne coatings. This product is made from tall oil fatty acids and has low viscosity 55 percent solution in a mixture of white spirit and xylene. CHS-Alkyd T 501 WX 55 is a driver for formulating all purpose coatings to improve weathering and UV resistance, due to its low yellowing tendency. 表示を減らす | |
| CHS-Alkyd TU 497 X 55 | Spolchemie | CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimat...もっと表示する CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 49%. CHS-Alkyd TU 497 X 55 is primarily used for producing of industrial coatings on metal surfaces and improves resistance to corrosion and weathering. 表示を減らす | |
| CHS-Epoxy 381 X 90 | Spolchemie | CHS-Epoxy 381 X 90 is a solution of a modified low molecular weighted epoxy. It is a flexible liquid epoxy resin based on BPA. This product comes from 90 percent xylene solution. The primary use for this product is to be used for producing high-solid pain...もっと表示する CHS-Epoxy 381 X 90 is a solution of a modified low molecular weighted epoxy. It is a flexible liquid epoxy resin based on BPA. This product comes from 90 percent xylene solution. The primary use for this product is to be used for producing high-solid paints and manufacture of anticorrosive coatings and enamels. 表示を減らす | |
| CHS-Epoxy 501 | Spolchemie | CHS-Epoxy 501 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 501 is primarily used for adhesives, composites, casting, anticorrosion paints...もっと表示する CHS-Epoxy 501 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 501 is primarily used for adhesives, composites, casting, anticorrosion paints. 表示を減らす | |
| CHS-Epoxy 508 | Spolchemie | CHS-Epoxy 508 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a mono-functional reactive diluent. It is also able to cure at ambient or elevated temperature levels. CHS-Epoxy 508 is the higher...もっと表示する CHS-Epoxy 508 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a mono-functional reactive diluent. It is also able to cure at ambient or elevated temperature levels. CHS-Epoxy 508 is the higher viscous version of CHS-Epoxy 521. The primary use of CHS-Epoxy 508 is for potting, bonding agents, laminating, producing casting compounds, polymer concrete and self-levelling flooring. 表示を減らす | |
| CHS-Epoxy 514 | Spolchemie | CHS-Epoxy 514 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 514 is primarily used for adhesives, composites, casting, anticorrosion paints...もっと表示する CHS-Epoxy 514 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 514 is primarily used for adhesives, composites, casting, anticorrosion paints. 表示を減らす | |
| CHS-Epoxy 520 X 90 | Spolchemie | CHS-Epoxy 520 X 90 is a solution that is 90 percent xylene. It is solution of a modified low molecular weighted epoxy resin based on BPA. CHS-Epoxy 520 X 90 has an epoxide equivalent weight (EEW) range of 182-192 g/mol. The primary use for this product is...もっと表示する CHS-Epoxy 520 X 90 is a solution that is 90 percent xylene. It is solution of a modified low molecular weighted epoxy resin based on BPA. CHS-Epoxy 520 X 90 has an epoxide equivalent weight (EEW) range of 182-192 g/mol. The primary use for this product is for producing solid paints and manufacture anticorrosive coatings and enamels. 表示を減らす | |
| CHS-Epoxy 571 | Spolchemie | CHS-Epoxy 571 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 571 is primarily used for laminating, saturating, forming applications in civil and electrical engineering, construction of insulating mater...もっと表示する CHS-Epoxy 571 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 571 is primarily used for laminating, saturating, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. 表示を減らす | |
| CHS-Epoxy 572 | Spolchemie | CHS-Epoxy 572 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 572 is primarily used for laminating, penetrants, forming applications in civil and electrical engineering, construction of insulating mater...もっと表示する CHS-Epoxy 572 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 572 is primarily used for laminating, penetrants, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. 表示を減らす | |
| CHS-Epoxy 573 | Spolchemie | CHS-Epoxy 573 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 573 is primarily used for coatings, laminating, penetrants, forming applications in civil and electrical engineering, construction of insula...もっと表示する CHS-Epoxy 573 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 573 is primarily used for coatings, laminating, penetrants, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. 表示を減らす | |
| CHS-Epoxy 574 | Spolchemie | CHS-Epoxy 574 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 574 is primarily used for coatings, lamination, penetrates, forming applicatio...もっと表示する CHS-Epoxy 574 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 574 is primarily used for coatings, lamination, penetrates, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. 表示を減らす | |
| CHS-Epoxy 575 | Spolchemie | CHS-Epoxy 575 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 575 is primarily used for coatings, lamination, penetrants, forming applicatio...もっと表示する CHS-Epoxy 575 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 575 is primarily used for coatings, lamination, penetrants, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. 表示を減らす | |
| Crestakyd® 10-3000 | Scott Bader | Crestakyd® 10-3000 is an air drying alkyd with excellent brushability & flow characteristics, as well as good gloss retention & weathering resistance for top quality gloss paints used in both decorative and marine applications. |
