| BENCRYL PU 139 | Benasedo | BENCRYL PU 139 is an acrili oligomer, with a urethane aromatic modification, with good hardness and flexibility. It is indicated for paper, wood and plastic substrates, where adhesion and, especially, abrasion resi stance are requested. BENCRYL PU 139 is...もっと表示する BENCRYL PU 139 is an acrili oligomer, with a urethane aromatic modification, with good hardness and flexibility. It is indicated for paper, wood and plastic substrates, where adhesion and, especially, abrasion resi stance are requested. BENCRYL PU 139 is curable thorugh EB or UV radiations, when used in combination with photoinitiators. 表示を減らす | |
| BENCRYL PU 141 | Benasedo | BENCRYL PU 141 is a non-yellowing aliphatic urethane acrylated oligomer. It is suggested for formulating enamels for wood, plastic and paper endowed with good flexibility, very good abrasion and chemical resistances. UV curing is achived by the addition o...もっと表示する BENCRYL PU 141 is a non-yellowing aliphatic urethane acrylated oligomer. It is suggested for formulating enamels for wood, plastic and paper endowed with good flexibility, very good abrasion and chemical resistances. UV curing is achived by the addition of photoinitiators whit small amounts of photoactivator (acrylated amine) 表示を減らす | |
| BENCRYL PU 1515 | Benasedo | BENCRYL PU 1515 is a linear aromatic urethane acrylated oligomer endowed with good flexibility, very good chemicals resistances, hardness and adhesion on wood, plastic and paper. It is an ideal UV curing binder for wood floor coatings. | |
| BYD-1007 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1007, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in surface coatings for paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyureth...もっと表示する BYD-1007, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in surface coatings for paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. 表示を減らす | |
| BYD-1308 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1308, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a polish for card paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane...もっと表示する BYD-1308, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a polish for card paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. 表示を減らす | |
| BYD-1318 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is...もっと表示する BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. 表示を減らす | |
| BYD-1348 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1348, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a surface varnish coating for transfer papers, particularly vacuum aluminizing paper, gold paper, silver paper, and aluminum foil...もっと表示する BYD-1348, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a surface varnish coating for transfer papers, particularly vacuum aluminizing paper, gold paper, silver paper, and aluminum foil paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. 表示を減らす | |
| BYD-1403 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1403, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used on surface coatings for paper and leather, roller coatings, spray paints, transfer printing, and intaglio printing applications. Th...もっと表示する BYD-1403, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used on surface coatings for paper and leather, roller coatings, spray paints, transfer printing, and intaglio printing applications. This product is non-toxic. Its substrate is an aromatic waterborne polyurethane. 表示を減らす | |
| BYD2610 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2610, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in weatherproof exterior wall coatings and high-quality interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water....もっと表示する BYD2610, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in weatherproof exterior wall coatings and high-quality interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. 表示を減らす | |
| BYD2620 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2620, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in high quality exterior wall coatings and stain-resistant interior wall coatings. This product is resistant to yellowing, alkaline substrates, and wat...もっと表示する BYD2620, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in high quality exterior wall coatings and stain-resistant interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. 表示を減らす | |
| BYD7201 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7201, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a plastic binder for PVC, PS, fabrics, wood, paper, and cement applications. This product offers strong cohesive strength and fast film formation....もっと表示する BYD7201, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a plastic binder for PVC, PS, fabrics, wood, paper, and cement applications. This product offers strong cohesive strength and fast film formation. Its pH value is 5.0 +/- 1.0. 表示を減らす | |
| BYD7231 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7231, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a binder for construction, wood, paper, and fiber applications and provides electrostatic flocking for textiles. This product offers strong cohesi...もっと表示する BYD7231, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a binder for construction, wood, paper, and fiber applications and provides electrostatic flocking for textiles. This product offers strong cohesive strength and thickening effects. Its pH value is 5.0 +/- 1.0. 表示を減らす | |
| CN2264 | Sartomer Americas | CN2264 is a low color, polyester acrylate oligomer which has a fast cure response. This product has good hardness, high abrasion resistance, as well as good heat, chemical, and water resistance. CN2264 is developed for UV/EB-curable coatings and inks, esp...もっと表示する CN2264 is a low color, polyester acrylate oligomer which has a fast cure response. This product has good hardness, high abrasion resistance, as well as good heat, chemical, and water resistance. CN2264 is developed for UV/EB-curable coatings and inks, especially where hardness and abrasion resistance are required, specifically for wood, paper, and flooring coatings and screen, inkjet, and flexo inks. 表示を減らす | |
| CN294E | Sartomer Americas | CN294E is a clear liquid tetrafunctional acrylated polyester oligomer. This product has good chemical and heat resistance as well as good adhesion and high abrasion resistance. It also has a fast cure response, good lithographic behavior, and good pigment...もっと表示する CN294E is a clear liquid tetrafunctional acrylated polyester oligomer. This product has good chemical and heat resistance as well as good adhesion and high abrasion resistance. It also has a fast cure response, good lithographic behavior, and good pigment wetting. CN294E is used in UV curable coatings and inks including metal, paper, and plastic coatings and flexographic, screen, and lithographic inks. 表示を減らす | |
| CN299 | Sartomer Americas | CN299 is a clear to hazy liquid tetrafunctional acrylated polyester oligomer. It features fast cure response, good lithographic behavior, good pigment wetting, and hydrophobic/hydrophilic balance. CN299 is used in UV-curable coatings and inks including me...もっと表示する CN299 is a clear to hazy liquid tetrafunctional acrylated polyester oligomer. It features fast cure response, good lithographic behavior, good pigment wetting, and hydrophobic/hydrophilic balance. CN299 is used in UV-curable coatings and inks including metal, plastic, and paper coatings as well as flexographic, screen, and lithographic inks. This product also has good chemical resistance, good heat resistance, high abrasion resistance and good adhesion. 表示を減らす | |
| CN9167US | Sartomer Americas | CN9167US is a clear liquid aromatic urethane acrylate oligomer. This product possesses excellent pigment wetting and UV lithographic printing properties. It also has utility in a variety of coating applications, as it will impart hardness and abrasion res...もっと表示する CN9167US is a clear liquid aromatic urethane acrylate oligomer. This product possesses excellent pigment wetting and UV lithographic printing properties. It also has utility in a variety of coating applications, as it will impart hardness and abrasion resistance without brittleness. Suggested applications of CN9167US includes wood, metal, paper, plastic coatings and litho and screen inks. 表示を減らす | |
| Disvaket-100 | D.S.V. Chemicals Pvt. Ltd. | Disvaket-100 is a ketonic resin. This product has a melting point range of 85-95 degrees Celsius. It can be used in flexo and gravure inks for polypropylene and BOPP, as well as in nitrocellulose lacquers and paper varnishes. | |
| EPOFEN 2319 | Benasedo | EPOFEN 2319 is typically used in packaging coating applications where a pre-formulated coating system is desired or in wash coat applications. | |
| Epokukdo YDB-400 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. Currently, it is being applied for paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400H | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400H is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. Currently, it is being applied for paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400T60 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400T60 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly applied to paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400T70 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400T70 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly being applied to paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400TE70 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400TE70 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly applied to paper phenolic laminates as an additional flame retardant. | |
| Flexonic™ 601 A | Lawter | Flexonic™ 601 A is an aqueous wax dispersion that has a concentrated wax blend that thrives in systems that need a high degree of transparency, gloss, slip and scratch, mar and wet rub resistance. The product uses a surfactant system that manages foaming ...もっと表示する Flexonic™ 601 A is an aqueous wax dispersion that has a concentrated wax blend that thrives in systems that need a high degree of transparency, gloss, slip and scratch, mar and wet rub resistance. The product uses a surfactant system that manages foaming without impacting on water resistance or contributing to incompatibility. Flexonic™ 601 A is suited for use in aqueous flexographic and gravure inks and in aqueous paper, metal, wood and OPV coatings. 表示を減らす | |
| Flexonic™ 902 A | Lawter | Flexonic™ 902 A is a water-based polyethylene and paraffin wax dispersion for use in systems that need a high degree of gloss, wet rub resistance along with slip, scratch and mar resistance properties. The product uses a surfactant system that manages foa...もっと表示する Flexonic™ 902 A is a water-based polyethylene and paraffin wax dispersion for use in systems that need a high degree of gloss, wet rub resistance along with slip, scratch and mar resistance properties. The product uses a surfactant system that manages foaming without impacting on incompatibility or water resistance. Flexonic™ 902 A is suited for use in aqueous flexographic and gravure inks and in aqueous wood, paper, metal and OPV coatings. 表示を減らす | |
| Gum Rosin, WW-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, WW-Grade, in the form of a pale yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. | |
| Gum Rosin, X-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents...もっと表示する Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. 表示を減らす | |
| HS9103 | Tianyi Chemical Engineering Material Co., Ltd. | HS9103, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has good flowability and wetting characteristics. It shows high fullness and good f...もっと表示する HS9103, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has good flowability and wetting characteristics. It shows high fullness and good flexibility. 表示を減らす | |
| HS9104 | Tianyi Chemical Engineering Material Co., Ltd. | HS9104, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has a rapid cure with high gloss. It has a low shrinkage rate with high flexibilit...もっと表示する HS9104, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has a rapid cure with high gloss. It has a low shrinkage rate with high flexibility. 表示を減らす | |
| HS9301B | Tianyi Chemical Engineering Material Co., Ltd. | HS9301B, in the form of a transparent resin, is a pure acrylate resin that can be used in UV cured coatings, paper coatings, wooden coatings, metal coatings, or UV inks. This product is soluble in active monomers or inert solvents. | |
| HS9303B | Tianyi Chemical Engineering Material Co., Ltd. | HS9303B, in the form of a transparent resin, is a pure acrylate resin that can be used in UV-cured coatings like paper coatings, wooden coatings, metal coatings, or UV inks. This product is soluble in active monomers or inert solvents. | |
| Maleic Anhydride | Hainan Zhongxin Chemical Co., Ltd. | Maleic anhydride is an important organic chemical and raw material. It is primarily used to make unsaturated polyester resins and paints and paper products. It has additional uses as a treatment agent for artificial leather and marble. | |
| Miradull™ 7060 A | Lawter | Miradull™ 7060 A is a dull sheet-fed overprint varnish that shows a dull and gloss contrast of the printed materials. It has good drying properties and withstands burnishing. The product also displays resistance to piling, good transfer, a light color and...もっと表示する Miradull™ 7060 A is a dull sheet-fed overprint varnish that shows a dull and gloss contrast of the printed materials. It has good drying properties and withstands burnishing. The product also displays resistance to piling, good transfer, a light color and is considered ideal for use in overprints. 表示を減らす | |
| Miradull™ 8689 A | Lawter | Miradull™ 8689 A is an ultra dull sheet-fed overprint varnish that offers premium performance in terms of offset lithography. The dull finish makes it resistant to polishing with good yellowing characteristics. The wax and drier content allows for skinnin...もっと表示する Miradull™ 8689 A is an ultra dull sheet-fed overprint varnish that offers premium performance in terms of offset lithography. The dull finish makes it resistant to polishing with good yellowing characteristics. The wax and drier content allows for skinning in the can. Other benefits include the highest degree of matte finish, good transparency and hard drying. Miradull™ 8689 A is suitable for use in overprints. 表示を減らす | |
| Picassian® AC-246 | Stahl Polymers | Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good g...もっと表示する Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good grease resistance properties, good alcohol compatibility, and good pigment compatibility. 表示を減らす | |
| Polurene AC510 | S.A.P.I.C.I. SpA | Polurene AC510 is an aromatic isocyanurate. This product is highly compatible with nitrocellulose, aromatic solvents, saturated polyesters, hydroxide acrylic and vinyl resins. It can be used in sealers and topcoats for wood, metal and paper. This produ...もっと表示する Polurene AC510 is an aromatic isocyanurate. This product is highly compatible with nitrocellulose, aromatic solvents, saturated polyesters, hydroxide acrylic and vinyl resins. It can be used in sealers and topcoats for wood, metal and paper. This product contains less than .7% TDI isocyanates. 表示を減らす | |
| PVP-K12 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K12 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 10-13 and a total solids content of 39-41%. PVP-K12 is most commonly used as a suspending, dispersing, and emuls...もっと表示する PVP-K12 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 10-13 and a total solids content of 39-41%. PVP-K12 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 表示を減らす | |
| PVP-K120 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K120 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 110-125 and a total solids content of 14-16%. PVP-K120 is most commonly used as a suspending, dispersing, and e...もっと表示する PVP-K120 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 110-125 and a total solids content of 14-16%. PVP-K120 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 表示を減らす | |
| PVP-K15 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K15 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 13-17 and a total solids content of 39-41%. PVP-K15 is most commonly used as a suspending, dispersing, and emuls...もっと表示する PVP-K15 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 13-17 and a total solids content of 39-41%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 表示を減らす | |
| PVP-K15 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K15 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 13-18 and a total solids content of greater than 95%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying ag...もっと表示する PVP-K15 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 13-18 and a total solids content of greater than 95%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 表示を減らす | |
| PVP-K17 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K17 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 15-19 and a total solids content of 39-41%. PVP-K17 is most commonly used as a suspending, dispersing, and emuls...もっと表示する PVP-K17 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 15-19 and a total solids content of 39-41%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 表示を減らす | |
| PVP-K17 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K17 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 15-19 and a total solids content of greater than 95%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying ag...もっと表示する PVP-K17 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 15-19 and a total solids content of greater than 95%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 表示を減らす | |
| PVP-K25 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K25 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 22-28 and a total solids content of greater than 95%. PVP-K25 is most commonly used as a suspending, dispersing, and emulsifying ag...もっと表示する PVP-K25 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 22-28 and a total solids content of greater than 95%. PVP-K25 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 表示を減らす | |
| PVP-K30 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K30 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 27-33 and a total solids content of 29-31%. PVP-K30 is most commonly used as a suspending, dispersing, and emuls...もっと表示する PVP-K30 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 27-33 and a total solids content of 29-31%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 表示を減らす | |
| PVP-K30 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K30 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 27-33 and a total solids content of greater than 95%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying ag...もっと表示する PVP-K30 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 27-33 and a total solids content of greater than 95%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 表示を減らす | |
| PVP-K60 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K60 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 52-62 and a total solids content of 38-42%. PVP-K60 is most commonly used as a suspending, dispersing, and emuls...もっと表示する PVP-K60 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 52-62 and a total solids content of 38-42%. PVP-K60 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 表示を減らす | |
| PVP-K90 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K90 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 81-97 and a total solids content of 19-21%. PVP-K90 is most commonly used as a suspending, dispersing, and emuls...もっと表示する PVP-K90 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 81-97 and a total solids content of 19-21%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 表示を減らす | |
| PVP-K90 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K90 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 81-94 and a total solids content of greater than 95%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying ag...もっと表示する PVP-K90 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 81-94 and a total solids content of greater than 95%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 表示を減らす | |
| PVP/VA28W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA28W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 16-22 and a total solids content of 48-52%. PVP/VA28W is most commonly used as a binder and vis...もっと表示する PVP/VA28W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 16-22 and a total solids content of 48-52%. PVP/VA28W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 表示を減らす | |
| PVP/VA37E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA37E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA37E is most commonly used as a binder and vis...もっと表示する PVP/VA37E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA37E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 表示を減らす | |
| PVP/VA55E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA55E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA55E is...もっと表示する PVP/VA55E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA55E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 表示を減らす | |
| PVP/VA55W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA55W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 22-30 and a total solids content of 48-52%. PVP/VA55W is most commonly used as a binder and vis...もっと表示する PVP/VA55W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 22-30 and a total solids content of 48-52%. PVP/VA55W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 表示を減らす | |
| PVP/VA73E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA73E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-38 and a total solids content of 48-52%. PVP/VA73E is most commonly used as a binder and vis...もっと表示する PVP/VA73E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-38 and a total solids content of 48-52%. PVP/VA73E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 表示を減らす | |
| PVP/VA73W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA73W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA73W is most commonly used as a binder and vis...もっと表示する PVP/VA73W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA73W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 表示を減らす | |
| PVP/VA84E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA84E is...もっと表示する PVP/VA84E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA84E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 表示を減らす | |
| PVP/VA84S | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84S is a copolymer of vinylpyrrolidone and vinylacetate in a white to milky white powder form. This product has a K value of 30-36 and a total solids content of greater than 95%. PVP/VA84S is most commonly used as a binder and viscosity-enhancing ...もっと表示する PVP/VA84S is a copolymer of vinylpyrrolidone and vinylacetate in a white to milky white powder form. This product has a K value of 30-36 and a total solids content of greater than 95%. PVP/VA84S is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 表示を減らす | |
| PVP/VA84W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36 and a total solids content of 48-52%. PVP/VA84W is most commonly used as a binder and vis...もっと表示する PVP/VA84W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36 and a total solids content of 48-52%. PVP/VA84W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 表示を減らす | |
| Reactol™ 1717H A | Lawter | Reactol™ 1717H A is a polyketone resin with high alcohol solubility and whose high melt point ensures improved heat resistance and better blocking resistance than other resins in the group. The resin exhibits high polarity allowing for improved pigment we...もっと表示する Reactol™ 1717H A is a polyketone resin with high alcohol solubility and whose high melt point ensures improved heat resistance and better blocking resistance than other resins in the group. The resin exhibits high polarity allowing for improved pigment wetting, gloss and adhesion. Reactol™ 1717H A is used in vinyl sealers and coatings, cellulose lacquers and in flexographic and rotogravure inks. 表示を減らす | |
| Reactol™ 1979 A | Lawter | Reactol™ 1979 A is a hydroxyl functional polyester with good gloss in pigmented inks and overprints. It also offers good flexibility, adhesion and pigment wetting properties with low viscosity features. The resin is compatible with cellulose esters and ni...もっと表示する Reactol™ 1979 A is a hydroxyl functional polyester with good gloss in pigmented inks and overprints. It also offers good flexibility, adhesion and pigment wetting properties with low viscosity features. The resin is compatible with cellulose esters and nitrocellulose and can be cross-linked with melamine to create a glossy thermoset coating with good color retention. Reactol™ 1979 A is used in flexographic and gravure inks and in paper and wood coatings. 表示を減らす | |
| Reactol™ 3107 A | Lawter | Reactol™ 3107 A is a condensate resin polymer which rids bleeding of dyes when moisture and grease are present. It enhances solubility of dyes in solvent systems with greater dye concentrations leading to better tint strength and gloss. The exclusive use ...もっと表示する Reactol™ 3107 A is a condensate resin polymer which rids bleeding of dyes when moisture and grease are present. It enhances solubility of dyes in solvent systems with greater dye concentrations leading to better tint strength and gloss. The exclusive use of the resin binder eliminates discoloration tendencies, leading to cleaner colors. The product is used in liquid inks and coatings and in wood stains and lacquers. 表示を減らす | |
| Rexin DP 417 | S.A.P.I.C.I. SpA | Rexin DP 417 is a solventless saturated polyester resin. This product has good elasticity. It can be used in enamels and coatings for paper, leather, plastic and rubber. It is particularly used for the formation of soft-touch effect coatings. | |
| Rexin DP 430 | S.A.P.I.C.I. SpA | Rexin DP 430 is a solventless saturated polyester resin. This product has good elasticity. It can be used in coatings and enamels for leather, plastic, rubber and paper coatings. It is used to formulate soft-touch effect coatings. | |
| Sarbox SB510E35 | Sartomer Americas | Sarbox SB510E35 is a moderately functional, carboxylic acid and anhydride containing methacrylate oligomer, ethoxylated trimethylolpropane triacrylate monomer. It offers excellent cure speed, excellent adhesion to metal and plastics, good wetting and flow...もっと表示する Sarbox SB510E35 is a moderately functional, carboxylic acid and anhydride containing methacrylate oligomer, ethoxylated trimethylolpropane triacrylate monomer. It offers excellent cure speed, excellent adhesion to metal and plastics, good wetting and flow characteristics. Sarbox SB510E35 also has excellent thin film adhesion to electrocoated steel. Suggested applications of this product include adhesives, plastisols, screen, flexo, and gravure inks, and paper, plastic, metal, and wood coatings. 表示を減らす | |
| Sarbox SB520E35 | Sartomer Americas | Sarbox SB520E35 is a moderately functional, carboxylic acid containing acrylate oligomer tripropylene glycol diacrylate monomer. Reactive solids of this product are 100%. Sarbox SB520E35 offers one of the fastest cure rates in the Sarbox product line, exc...もっと表示する Sarbox SB520E35 is a moderately functional, carboxylic acid containing acrylate oligomer tripropylene glycol diacrylate monomer. Reactive solids of this product are 100%. Sarbox SB520E35 offers one of the fastest cure rates in the Sarbox product line, excellent adhesion to metals and plastics, and good wetting and flow characteristics. It also offers high impact strength and flexibility as well as good chemical, water, and heat resistance. Other suggested applications for this product include ink applications, wood and paper coatings, and photoresists/solder masks for electronics. 表示を減らす | |
| Sarbox SB520M35 | Sartomer Americas | Sarbox SB520M35 is a moderately functional, carboxylic acid containing acrylate oligomer tripropylene glycol diacrylate monomer. Sarbox SB520M35 offers one of the fastest cure rates in the Sarbox product line, excellent adhesion to metals and plastics, an...もっと表示する Sarbox SB520M35 is a moderately functional, carboxylic acid containing acrylate oligomer tripropylene glycol diacrylate monomer. Sarbox SB520M35 offers one of the fastest cure rates in the Sarbox product line, excellent adhesion to metals and plastics, and good wetting and flow characteristics. It also offers high impact strength and flexibility as well as good chemical, water, and heat resistance. Other suggested applications for this product include screen, flexo, and gravure inks, wood and paper coatings, and photoresists/solder masks for electronics. 表示を減らす | |
| SmartHide™ | ShayoNano USA, Inc. | SmartHide™ is a proprietary engineered composite inorganic pigment which is used as a partial replacement for TiO₂ paints without negatively affecting opacity of the dry paint film and no or minimal effect on wet hiding. SmartHide is a patented silicon z...もっと表示する SmartHide™ is a proprietary engineered composite inorganic pigment which is used as a partial replacement for TiO₂ paints without negatively affecting opacity of the dry paint film and no or minimal effect on wet hiding. SmartHide is a patented silicon zinc oxide composite pigment that can also provide the beneficial functionality of a zinc oxide in a more formula stable manor. This product can be used for ceiling paints, traffic paints, roof coatings, water-based ink, interior and exterior paints, DTM enamel, specialty primers, and paper coatings. 表示を減らす | |
| Stirinol™ 350 A | Lawter | Stirinol™ 350 A is a coatable polyethylene and PTFE heatset compound to give good gloss retention, rub resistance and slip in heatset inks. It resists re-crystallization at ink-processing temperature. Stirinol™ 350 A is suitable for use in heatset inks. | |
| Stirinol™ 97 A | Lawter | Stirinol™ 97 A is a heatset wax compound to give good rub and slip in heatset inks. It is easily dispersed, retains gloss and has good re-crystallization resistance. It also had minimal effect on rheology and is ideally suited for use in heatset offset in...もっと表示する Stirinol™ 97 A is a heatset wax compound to give good rub and slip in heatset inks. It is easily dispersed, retains gloss and has good re-crystallization resistance. It also had minimal effect on rheology and is ideally suited for use in heatset offset inks and hot foil stamping applications. 表示を減らす | |
| Stirinol™ 98 A | Lawter | Stirinol™ 98 A is a heatset wax compound to give good rub and slip in heatset inks used to print catalogs, tabloids and publication inserts. It disperses easily, retains gloss and has good re-crystallization resistance. Stirinol™ 98 A is suitable for use ...もっと表示する Stirinol™ 98 A is a heatset wax compound to give good rub and slip in heatset inks used to print catalogs, tabloids and publication inserts. It disperses easily, retains gloss and has good re-crystallization resistance. Stirinol™ 98 A is suitable for use in heatset offset inks and in hot foil stamping applications. 表示を減らす | |
| Synkyd™ 50 E | Lawter | Synkyd™ 50 E consists of a vinyl-modified alkyd resin displaying high solubility in mineral distillates and effective water resistance benefits. It has good pigment wetting properties, along with a high gloss and good flow behavior. The product is used in...もっと表示する Synkyd™ 50 E consists of a vinyl-modified alkyd resin displaying high solubility in mineral distillates and effective water resistance benefits. It has good pigment wetting properties, along with a high gloss and good flow behavior. The product is used in offset, sheet-fed, letterpress and screen ink applications. 表示を減らす | |
| Terlon™ 3010 A | Lawter | Terlon™ 3010 A is a grinding and flushing alkyd with a linseed base in an alkyd known for its pigment wetting and fast, hard-drying properties. The product is considered a vital ingredient in many oil-based printing inks. The alkyd's ability to create and...もっと表示する Terlon™ 3010 A is a grinding and flushing alkyd with a linseed base in an alkyd known for its pigment wetting and fast, hard-drying properties. The product is considered a vital ingredient in many oil-based printing inks. The alkyd's ability to create and maintain color strength with little bronzing while providing leveling and flow, ensure the product is an essential formulating tool. Terlon™ 310 A is compatible with most inks, helping to stabilizing ink formulations that don't hold up on long runs. The applications in which it has uses include sheet-fed offset, heatset offset, coldset offset, metal deco and letterpress. 表示を減らす | |
| TKAS-11 Pink | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-11 Pink is a pink fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, scre...もっと表示する TKAS-11 Pink is a pink fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. 表示を減らす | |
| TKAS-12 Cerise | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-12 Cerise is a cerise fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, ...もっと表示する TKAS-12 Cerise is a cerise fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. 表示を減らす | |
| TKAS-13 Red | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-13 Red is a red fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen...もっと表示する TKAS-13 Red is a red fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. 表示を減らす | |
| TKAS-14 Red Orange | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-14 Red Orange is a red orange fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper co...もっと表示する TKAS-14 Red Orange is a red orange fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. 表示を減らす | |
| TKAS-15 Orange | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-15 Orange is an orange fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings,...もっと表示する TKAS-15 Orange is an orange fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. 表示を減らす | |
| TKAS-16 Orange Yellow | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-16 Orange Yellow is an orange yellow fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, p...もっと表示する TKAS-16 Orange Yellow is an orange yellow fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. 表示を減らす | |
| TKAS-17 Yellow | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-17 Yellow is a yellow fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, ...もっと表示する TKAS-17 Yellow is a yellow fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. 表示を減らす | |
| TKAS-18 Green | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-18 Green is a green fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, sc...もっと表示する TKAS-18 Green is a green fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. 表示を減らす | |
| TKAS-19 Blue | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-19 Blue is a blue fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, scre...もっと表示する TKAS-19 Blue is a blue fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. 表示を減らす | |
| TKAS-20 Lemon Yellow | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-20 Lemon Yellow is a lemon yellow fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, pape...もっと表示する TKAS-20 Lemon Yellow is a lemon yellow fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. 表示を減らす | |
| TKAS-21 Rose | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-21 Rose is a rose fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, scre...もっと表示する TKAS-21 Rose is a rose fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. 表示を減らす | |
| TKAS-22 Violet | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKAS-22 Violet is a violet fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, ...もっと表示する TKAS-22 Violet is a violet fluorescent pigment that has superior brightness and good tinctorial strength. This product has a specific gravity of 1.36 g/cm3 and a softening point of approximately 110°C. It is commonly used in gravure inks, paper coatings, screen inks, and paints. 表示を減らす | |
| TKG-2C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-2C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 55 to 75 micrometers and finds applicati...もっと表示する TKG-2C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 55 to 75 micrometers and finds application in coatings, inks, paints, and printing pastes. 表示を減らす | |
| TKPS-10 Lemon Yellow | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-10 Lemon Yellow is a lemon yellow fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recom...もっと表示する TKPS-10 Lemon Yellow is a lemon yellow fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. 表示を減らす | |
| TKPS-11 Green | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-11 Green is a green fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use...もっと表示する TKPS-11 Green is a green fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. 表示を減らす | |
| TKPS-12 Orange Yellow | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-12 Orange Yellow is an orange yellow fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is re...もっと表示する TKPS-12 Orange Yellow is an orange yellow fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. 表示を減らす | |
| TKPS-13 Orange | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-13 Orange is an orange fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for ...もっと表示する TKPS-13 Orange is an orange fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. 表示を減らす | |
| TKPS-14 Red Orange | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-14 Red Orange is a red orange fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommend...もっと表示する TKPS-14 Red Orange is a red orange fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. 表示を減らす | |
| TKPS-15 Red | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-15 Red is a red fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in ...もっと表示する TKPS-15 Red is a red fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. 表示を減らす | |
| TKPS-16 Cerise | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-16 Cerise is a cerise fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for u...もっと表示する TKPS-16 Cerise is a cerise fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. 表示を減らす | |
| TKPS-17 Pink | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-17 Pink is a pink fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use i...もっと表示する TKPS-17 Pink is a pink fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. 表示を減らす | |
| TKPS-18 Rose | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-18 Rose is a rose fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use i...もっと表示する TKPS-18 Rose is a rose fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. 表示を減らす | |
| TKPS-19 Blue | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-19 Blue is a blue fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use i...もっと表示する TKPS-19 Blue is a blue fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. 表示を減らす | |
| TKPS-20 White | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-20 White is a white fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use...もっと表示する TKPS-20 White is a white fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. 表示を減らす | |
| TKPS-21 Violet | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKPS-21 Violet is a violet fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for u...もっと表示する TKPS-21 Violet is a violet fluorescent pigment that has excellent heat stability with organic solvent systems of non-polar or weak polar systems. This product has a specific gravity of 1.34 g/cm3 and a decomposition point of 225°C. It is recommended for use in gravure inks, paper coatings, and PVC screen inks. 表示を減らす | |
| Trionol™ 3 A | Lawter | Trionol™ 3 A is an alkyd for enhancing ink film integrity that comes with good pigment wetting properties and has the ability to improve setting speed, gloss and rub resistance. It can replace drying oils in heatset and quickset inks in order to improve c...もっと表示する Trionol™ 3 A is an alkyd for enhancing ink film integrity that comes with good pigment wetting properties and has the ability to improve setting speed, gloss and rub resistance. It can replace drying oils in heatset and quickset inks in order to improve compatibility, pigment wetting, rub resistance and solvent tolerance without sacrificing setting speed. The product's viscosity is stable in finished inks. It is ideal for sheet-fed, coldset, heatset, metal deco, silk screen and letterpress applications. 表示を減らす | |
| Trionol™ 33 A | Lawter | Trionol™ 33 A is an alkyd for boosting ink film integrity and provides a tough anchor as it partially penetrates and oxidizes when printed on coated paper. The rest of the product sits on the surface as a film-forming coating that quickly hardens into a r...もっと表示する Trionol™ 33 A is an alkyd for boosting ink film integrity and provides a tough anchor as it partially penetrates and oxidizes when printed on coated paper. The rest of the product sits on the surface as a film-forming coating that quickly hardens into a rub-resistant and tough print. It has good pigment wetting properties, can improve setting speed, rub resistance and gloss unlike other pigment wetting vehicles that lose setting speed and gloss. The product is used in coldset, heatset and sheet-fed offsets, with other applications in silk screen, metal deco and letterpress inks. 表示を減らす | |
| Trionol™ 7 A | Lawter | Trionol™ 7 A is a specialty alkyd used for boosting ink film integrity. It has good pigment wetting properties and can improve setting speed, gloss and rub resistance. The product can replace drying oils in heatset and quickset systems to improve pigment ...もっと表示する Trionol™ 7 A is a specialty alkyd used for boosting ink film integrity. It has good pigment wetting properties and can improve setting speed, gloss and rub resistance. The product can replace drying oils in heatset and quickset systems to improve pigment wetting, solvent tolerance, rub resistance and compatibility without sacrificing setting speed. It is ideally used in coldset, heatset and sheet-fed offsets with applications also in letterpress and metal deco inks. 表示を減らす | |
| Ucoflex EW 810/30A | S.A.P.I.C.I. SpA | Ucoflex EW 810/30A is an oleourethanic elastomer. This product has good yellowing, abrasion, and shock resistance. It can be used in clear or pigmented paints for ABS, PVC, PUR, polystyrene or paper. |
