| CHS-Alkyd S 471 WX 55 | Spolchemie | CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is...もっと表示する CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is primarily used for producing priming paints, enamels and quick drying coatings and lacquers. 表示を減らす | |
| CHS-Alkyd S 491 W 55 | Spolchemie | CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W ...もっと表示する CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W 55 is primarily used for manufacture in primer coatings for metal surfaces. 表示を減らす | |
| CHS-Alkyd S 622 N 60 | Spolchemie | CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic ...もっと表示する CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic content is just under one percent. This product is primarily used for air-drying coatings, enamels, lacquers and wood stains for exteriors and interiors. 表示を減らす | |
| CHS-Alkyd Trim 551 W 85 | Spolchemie | CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primar...もっと表示する CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primary use for this product is for fast drying protective metal and wood coatings that have high hardness with hard lacquers, anticorrosive paints and varnishes. 表示を減らす | |
| CHS-Alkyd TU 341 X 60 | Spolchemie | CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for...もっと表示する CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be 34%. CHS-Alkyd TU 341 X 60 is primarily used as a high performance anti-corrosion primer, paints and coatings; that has improved weather resistance on iron and light metal surfaces. 表示を減らす | |
| CHS-Epoxy 112 | Spolchemie | CHS-Epoxy 112 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 4 solid epoxy resin with epoxide equivalent weight (EEW) range between 900-1050 g/mol. This product is primarily used for manufacture of epoxy esters, ...もっと表示する CHS-Epoxy 112 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 4 solid epoxy resin with epoxide equivalent weight (EEW) range between 900-1050 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. 表示を減らす | |
| CHS-Epoxy 121 | Spolchemie | CHS-Epoxy 121 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 3.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 800-900 g/mol. This product is primarily used for manufacture of epoxy esters,...もっと表示する CHS-Epoxy 121 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 3.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 800-900 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution 表示を減らす | |
| CHS-Epoxy 130 | Spolchemie | CHS-Epoxy 130 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 3 solid epoxy resin with epoxide equivalent weight (EEW) range between 700-800 g/mol. This product is primarily used for manufacture of epoxy esters, p...もっと表示する CHS-Epoxy 130 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 3 solid epoxy resin with epoxide equivalent weight (EEW) range between 700-800 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. 表示を減らす | |
| CHS-Epoxy 141 | Spolchemie | CHS-Epoxy 141 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 2.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 650-700 g/mol. This product is primarily used for manufacture of epoxy esters, po...もっと表示する CHS-Epoxy 141 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 2.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 650-700 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. 表示を減らす | |
| CHS-Epoxy 160 | Spolchemie | CHS-Epoxy 160 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 2 solid epoxy resin with epoxide equivalent weight (EEW) range between 600-650 g/mol. This product is primarily used for manufacture of epoxy esters, powd...もっと表示する CHS-Epoxy 160 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 2 solid epoxy resin with epoxide equivalent weight (EEW) range between 600-650 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. 表示を減らす | |
| CHS-Epoxy 171 | Spolchemie | CHS-Epoxy 171 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 1.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 550-600 g/mol. This product is primarily used for manufacture of epoxy esters, po...もっと表示する CHS-Epoxy 171 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 1.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 550-600 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. 表示を減らす | |
| Disvaket-100 | D.S.V. Chemicals Pvt. Ltd. | Disvaket-100 is a ketonic resin. This product has a melting point range of 85-95 degrees Celsius. It can be used in flexo and gravure inks for polypropylene and BOPP, as well as in nitrocellulose lacquers and paper varnishes. | |
| Disvaket-200 | D.S.V. Chemicals Pvt. Ltd. | Disvaket-200 is a ketonic resin. This product's melting point range is 105-115 degrees Celsius. It can be used in ballpoint inks and in wood lacquers. | |
| Disvimol-102 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-102 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and compatible with nitrocellulose substrates. It can be used in nitrocellulose lacquers and putty, in vinyl lacquers, and in flexographic inks. | |
| Disvipol-251 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-251 is a phenolic resin with high purity. This product is soluble in Novolac. It can be used in flexogravure inks, spirit varnishes, aniline inks, anti-corrosion lacquers, and traffic paints. | |
| Estergum-751 | D.S.V. Chemicals Pvt. Ltd. | Estergum-751 is an esterified rosin derivative. This product derives from penta polyols. It can be used in primers, undercoats, adhesives, and nitrocellulose lacquers. | |
| Filtrez™ 3320 A | Lawter | Filtrez™ 3320 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Filtrez™ 3320 A is considered suitable for use in gravure and flexographic inks and coatings. | |
| Filtrez™ 339 A | Lawter | Filtrez™ 339 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Benefits of using the resin include higher gloss, adhesion and hardness. Filtrez™ 339 A is used in flexographic and gravure i...もっと表示する Filtrez™ 339 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Benefits of using the resin include higher gloss, adhesion and hardness. Filtrez™ 339 A is used in flexographic and gravure inks and coatings. 表示を減らす | |
| Flex-rez™ 1074CS A | Lawter | Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The pr...もっと表示する Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The product is used in gravure and flexographic inks, overprint varnishes and cold seal release lacquers. 表示を減らす | |
| Flex-Rez™ 1084AS A | Lawter | Flex-Rez™ 1084AS A is a polyamide resin that is alcohol soluble, is non-film forming and has the advantage of displaying a high melting point. It also has high heat, grease and gel resistance properties and is a fast solvent release. Flex-Rez™ 1084AS A is...もっと表示する Flex-Rez™ 1084AS A is a polyamide resin that is alcohol soluble, is non-film forming and has the advantage of displaying a high melting point. It also has high heat, grease and gel resistance properties and is a fast solvent release. Flex-Rez™ 1084AS A is suitable for use in flexo/gravure inks for plastics and foils and in overprint varnishes and coatings. 表示を減らす | |
| Flex-Rez™ 1155AS A | Lawter | Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is...もっと表示する Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is suitable for use in flexo/gravure inks for plastics and foils, in cold seal release lacquers and in coatings and overprint varnishes. 表示を減らす | |
| Flex-Rez™ 4584AD A | Lawter | Flex-Rez™ 4584AD A is a polyamide resin with 100% solids and is compatible with phenolic and maleic resins. It has good wet pack, gel and block resistance with gloss as an added feature. Flex-Rez™ 4584AD A is used in flexo and gravure inks for plastics an...もっと表示する Flex-Rez™ 4584AD A is a polyamide resin with 100% solids and is compatible with phenolic and maleic resins. It has good wet pack, gel and block resistance with gloss as an added feature. Flex-Rez™ 4584AD A is used in flexo and gravure inks for plastics and foil, in cold seal release lacquers and in coatings and overprint varnishes. 表示を減らす | |
| Resygs CG 3070 | SGS Polimeros | Resygs CG 3070 is a pure alkydic resin, in cocunut oil, characterized by its flexibility, weather resistance, retention, color, and shine. This product is used in furniture paints, polyurethanic primers, sealants, varnishes, automotive repainting, and lac...もっと表示する Resygs CG 3070 is a pure alkydic resin, in cocunut oil, characterized by its flexibility, weather resistance, retention, color, and shine. This product is used in furniture paints, polyurethanic primers, sealants, varnishes, automotive repainting, and lacquers. 表示を減らす | |
| Resygs SPG 4060 | SGS Polimeros | Resygs SPG 4060 is a pure alkyd resin, characterized by its high viscosity, chemical resistance, and hardness. This product is used in furniture paints, primers, sealants, lacquers, fillers, and automotive repainting varnishes. | |
| Resygs SPG 5050 | SGS Polimeros | Resygs SPG 5050 is a conventional alkyd resin. This product is designed for mechanical paints, synthetic paints and primers, automotive repainting, dye concentrates, decorative enamels, and wood varnishes and sealants. | |
| Rexin K 1939 | S.A.P.I.C.I. SpA | Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...もっと表示する Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. 表示を減らす | |
| WorléeKyd C 632 M | Worlée-Chemie G.m.b.H. | WorléeKyd C 632 M is a modified short oil alkyd resin for the manufacture of PVC resistant NC combination lacquers and paints. W´Kyd C 632 M is used in combination with nitrocellulose for the manufacture of PVC resistance NC-lacquers and paints. An additi...もっと表示する WorléeKyd C 632 M is a modified short oil alkyd resin for the manufacture of PVC resistant NC combination lacquers and paints. W´Kyd C 632 M is used in combination with nitrocellulose for the manufacture of PVC resistance NC-lacquers and paints. An addition of urea resin and acid catalyst is not necessary. 表示を減らす | |
| WorléeKyd C 641 | Worlée-Chemie G.m.b.H. | WorléeKyd C 641 is an extremely low viscous, alkyd resin used with nitrocellulose for clear and pigmented nitrocellulose lacquers, and acid curing coatings for wood, foil, and paper. This grade has a non-volatile content of 70% ± 1. It exhibits very quick...もっと表示する WorléeKyd C 641 is an extremely low viscous, alkyd resin used with nitrocellulose for clear and pigmented nitrocellulose lacquers, and acid curing coatings for wood, foil, and paper. This grade has a non-volatile content of 70% ± 1. It exhibits very quick solvent release, good recoatability at any time and very good yellowing resistance. 表示を減らす | |
| WorléeSin MK 223 | Worlée-Chemie G.m.b.H. | WorléeSin MK 223 is an internally plasticized maleic resin intended for use in high quality nitrocellulose lacquers having good cold check resistance and rapid solvent release. W´Sin MK 223 is compatible with nitrocellulose, non-drying short oil alkyds an...もっと表示する WorléeSin MK 223 is an internally plasticized maleic resin intended for use in high quality nitrocellulose lacquers having good cold check resistance and rapid solvent release. W´Sin MK 223 is compatible with nitrocellulose, non-drying short oil alkyds and urea formaldehyde resins. Even small quantities of W´Sin MK 223 in these lacquers improve hardness, scratch resistance and film build. 表示を減らす | |
| WorléeThix V 800 (38.5%-41.5% In Isoparaffin HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeThix V 800 (38.5%-41.5% In Isoparaffin HC 170-200) is a urethane modified long oil alkyd with a soft gel structure. The thixotropy is temperature and polar solvents stable. It is used for the manufacture of thick layer coatings and lacquers. This gr...もっと表示する WorléeThix V 800 (38.5%-41.5% In Isoparaffin HC 170-200) is a urethane modified long oil alkyd with a soft gel structure. The thixotropy is temperature and polar solvents stable. It is used for the manufacture of thick layer coatings and lacquers. This grade has a non volatile content of 40% ± 1.5. Paints and lacquers based on W´Thix V 800 have very good brushability, excellent flow and also at thick layers very good through drying. 表示を減らす | |
| WorléeThix V 800 (48%-52% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeThix V 800 (48%-52% In Dearomatized HC 160-200) is a urethane modified long oil alkyd with a soft gel structure. It used for the manufacture of thick layer coatings and lacquers. This grade has a non volatile content of 50% ± 2. W´Thix V 800 is comp...もっと表示する WorléeThix V 800 (48%-52% In Dearomatized HC 160-200) is a urethane modified long oil alkyd with a soft gel structure. It used for the manufacture of thick layer coatings and lacquers. This grade has a non volatile content of 50% ± 2. W´Thix V 800 is compatible with most medium and long oil drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. Paints and lacquers based on W´Thix V 800 have very good brushability, excellent flow and also at thick layers very good through drying. Due to the very good through drying, early stackability is achieved. Natural and artificial cold check tests have indicated long term elasticity. 表示を減らす |
